question string | answer string | source_file string | module_name string | tool_name string | tool_parameters list | tool_result string | category string | subcategory string | difficulty string | question_hash string | stage1_target string | stage2_context string | plan_id string | design_id string | split string | writer_model string | n_calls int64 | ctx_cap int64 | source dict |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For asic_tiehi, given that the area-focused optimization advisor suggests aggressive resource sharing, is that advice worthwhile given what synthesis actually produced, and what delay penalty would it introduce? | The resource-sharing advice is not worthwhile here because synthesis shows asic_tiehi contains 0 cells and 0 gates (just 1 wire with 1 bit), so there is nothing to share. Even so, the advisor estimates the area recipe would change area by -15.0 while increasing delay by 5.0, a trade-off with no practical benefit for th... | github_repos/aolofsson_oh/asiclib/hdl/asic_tiehi.v | asic_tiehi | optimization_advisor+synthesis_tool | [
{
"target_metric": "area"
},
{
"optimization_level": "medium"
}
] | [optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommended_recipes": [
"synth -top asic_tiehi -flatten",
"opt -full; share -aggressive; opt",
"abc -g gates -liberty stdcells.lib",
"opt_clean -purge"
],
"optimization_suggestions": [
{
... | multi_tool | optimization_advisor+synthesis_tool | compositional | e883a032851b | [{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For asic_tiehi, given that the area-focused optimization advisor suggests aggressive resource sharing, is that advice worthwhile given what synthesis actually produced, and what delay penalty would it introduce?
[optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "are... | 85e3a40fde27 | 6abe53f3d9ee | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "asiclib/hdl/asic_tiehi.v",
"sha256": "0de95a6238e2a9bf7aa06db595ea9790bbcbf250cc5108a3cb58899872933107"
} |
For the axi_ad35xxr_core module, how does the port and signal information from the structural analysis compare with the And-Inverter Graph (AIG) representation, and what does the static complexity analysis indicate about the design? | The structural analysis of axi_ad35xxr_core reports 17 inputs and 13 outputs (30 total ports) plus 18 wires and 3 regs, which matches the AIG's 17 port_input and 14 port_output nodes built from 344 nodes and 1406 edges. The static analysis shows the design is compact, with 198 lines of code, a cyclomatic complexity of ... | github_repos/analogdevicesinc_hdl/library/axi_ad35xxr/axi_ad35xxr_core.v | axi_ad35xxr_core | graph_extractor+static_analyzer | [
{
"graph_type": "AIG"
},
{
"analysis_type": "full"
}
] | [graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_type": "AIG",
...[33221 chars elided]...
"node_count": 344,
"edge_count": 1406,
"graph_properties": {
"node_types": {
"$_AND_": 69,
"$_NOT_": 207,
"$_DFF_PN0_": 34,
"axi_ad35xxr_channel": 2,
"up_dac_common"... | multi_tool | graph_extractor+static_analyzer | compositional | 1eff4bacfcc4 | [{"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the axi_ad35xxr_core module, how does the port and signal information from the structural analysis compare with the And-Inverter Graph (AIG) representation, and what does the static complexity analysis indicate about the design?
[graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_ty... | be1b079127c1 | 6ac71de0bb8b | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/axi_ad35xxr/axi_ad35xxr_core.v",
"sha256": "0d639275838f3cd5973b1f84fd362381f76bbd9d047dd9200a0203af0cbb526b"
} |
For the etx_remap module, how does the structure shown in its DFG compare with its synthesis results — what dominates the design, and what are the resulting area, delay, and power figures? | The DFG for etx_remap has 13 nodes and 452 edges (average degree 34.77) and is dominated by sequential elements, including one $sdffe and one $dffe plus a packet2emesh block, which matches the synthesis cell breakdown where flops dominate (104 $_DFFE_PN_ and 1 $_SDFFE_PN0N_) out of 150 total cells. Synthesis at medium ... | github_repos/aolofsson_oh/elink/hdl/etx_remap.v | etx_remap | graph_extractor+synthesis_tool | [
{
"graph_type": "DFG"
},
{
"optimization_level": "medium"
}
] | [graph_extractor {"graph_type": "DFG"}]
{
"status": "success",
"graph_type": "DFG",
...[24600 chars elided]...
"node_count": 13,
"edge_count": 452,
"graph_properties": {
"node_types": {
"$reduce_or": 1,
"$mux": 1,
"$sdffe": 1,
"$dffe": 1,
"packet2emesh": 1,
"port_output... | multi_tool | graph_extractor+synthesis_tool | compositional | 8829d77a0661 | [{"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the etx_remap module, how does the structure shown in its DFG compare with its synthesis results — what dominates the design, and what are the resulting area, delay, and power figures?
[graph_extractor {"graph_type": "DFG"}]
{
"status": "success",
"graph_type": "DFG",
...[24600 chars elided]...
"no... | 11e6c3885906 | 6af2ab8d1210 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "elink/hdl/etx_remap.v",
"sha256": "dd319997bf70da11a206700236834aff501dd96cb0c3de0cafabdb44a2e20339"
} |
For the arp_eth_rx module, given that its CDFG has 167 nodes with 30 $mux and 27 $eq operators, how suitable is the proposed area-focused optimization, and what delay trade-off should I expect? | The CDFG for arp_eth_rx has 167 nodes and 1613 edges, including 30 $mux and 27 $eq nodes, so the recommended mux sharing via muxcover and aggressive resource sharing via share -aggressive are well matched to its operator mix. The area optimization is estimated to improve area by -15.0 and power by -10.0, but at a delay... | github_repos/alexforencich_verilog-ethernet/rtl/arp_eth_rx.v | arp_eth_rx | graph_extractor+optimization_advisor | [
{
"graph_type": "CDFG"
},
{
"target_metric": "area"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[58603 chars elided]...
"node_count": 167,
"edge_count": 1613,
"graph_properties": {
"node_types": {
"$logic_and": 3,
"$logic_not": 4,
"$add": 1,
"$eq": 27,
"$logic_or": 1,
"$ne": 2... | multi_tool | graph_extractor+optimization_advisor | compositional | 7c94d22e98a0 | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}] | Question: For the arp_eth_rx module, given that its CDFG has 167 nodes with 30 $mux and 27 $eq operators, how suitable is the proposed area-focused optimization, and what delay trade-off should I expect?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[58603 chars elided]..... | eec434e480a5 | 6b3e47212d3a | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/alexforencich/verilog-ethernet",
"commit": "77320a9471d19c7dd383914bc049e02d9f4f1ffb",
"path": "rtl/arp_eth_rx.v",
"sha256": "4113e03df063b91d64be4da8e455ba45d8251cecc8e66ec75cec93c518443bee"
} |
For the avl_dacfifo module, how does the RTL complexity relate to the synthesized implementation — could you summarize the source-level complexity metrics alongside the area, delay, and power figures and the main storage cells used? | The avl_dacfifo RTL has 194 lines of code, cyclomatic complexity 14, nesting depth 15, and 501 operators across 7 always blocks and 3 assign statements. After synthesis it uses 662 gates for an area of 1026.0 with a critical-path delay of 417.52 and power of 0.662. The implementation is dominated by storage cells: 96 $... | github_repos/analogdevicesinc_hdl/library/intel/avl_dacfifo/avl_dacfifo.v | avl_dacfifo | static_analyzer+synthesis_tool | [
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "avl_dacfifo",
"port_count": {
"inputs": 13,
"outputs": 10,
"inouts": 0,
"total": 23
},
"signal_count": {
"wires": 11,
"regs": 9,
"parameters": 11,
"total": 20
},
"always_blocks": 7,
"assign... | multi_tool | static_analyzer+synthesis_tool | compositional | a034442bdad2 | [{"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the avl_dacfifo module, how does the RTL complexity relate to the synthesized implementation — could you summarize the source-level complexity metrics alongside the area, delay, and power figures and the main storage cells used?
[static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"modu... | 802bdcf32f41 | 6b0568153b6a | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/intel/avl_dacfifo/avl_dacfifo.v",
"sha256": "d2471bd8432e6f654935e7609c1832a9bc48525b1ad14ac3ac33e470cb5c930d"
} |
For system_top, how do the cell counts in the data-flow graph (DFG) analysis compare with the synthesis results, and what do the delay and power figures indicate about this medium-level optimization run? | The DFG for system_top contains 91 nodes and 637 edges with an average degree of 7.0, including 4 IBUFDS, 2 IBUFDS_GTE2, 1 OBUFDS, 2 ad_iobuf, 1 daq2_spi, and 1 system_wrapper, which matches the synthesis cell breakdown of 11 gates for the same cell types. Synthesis at medium optimization reports a critical path delay ... | github_repos/analogdevicesinc_hdl/projects/daq2/zc706/system_top.v | system_top | graph_extractor+synthesis_tool | [
{
"graph_type": "DFG"
},
{
"optimization_level": "medium"
}
] | [graph_extractor {"graph_type": "DFG"}]
{
"status": "success",
"graph_type": "DFG",
...[31535 chars elided]...
"node_count": 91,
"edge_count": 637,
"graph_properties": {
"node_types": {
"IBUFDS_GTE2": 2,
"IBUFDS": 4,
"ad_iobuf": 2,
"OBUFDS": 1,
"daq2_spi": 1,
"system_wr... | multi_tool | graph_extractor+synthesis_tool | compositional | 1f265d882e42 | [{"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For system_top, how do the cell counts in the data-flow graph (DFG) analysis compare with the synthesis results, and what do the delay and power figures indicate about this medium-level optimization run?
[graph_extractor {"graph_type": "DFG"}]
{
"status": "success",
"graph_type": "DFG",
...[31535 chars e... | 8349e7bdc06a | 6b9a8fd86f33 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "projects/daq2/zc706/system_top.v",
"sha256": "5a240318897c2136bff92db2fcdf25ad6113295c3334c9ba1c108e8d21886818"
} |
For system_top, how does the structure shown in its CDFG relate to the power optimization advice — what kinds of elements are in the design and what power savings are estimated if I follow the suggestions? | The CDFG of system_top has 68 nodes and 296 edges, including 13 input ports, 39 output ports, 11 inout ports, 3 ALT_IOBUF instances and 1 system_bd instance with an average degree of 4.35. The power-focused optimization suggests clock gating and operand isolation and estimates a power improvement of -25.0, with area an... | github_repos/analogdevicesinc_hdl/projects/ad4062_ardz/de10nano/system_top.v | system_top | graph_extractor+optimization_advisor | [
{
"graph_type": "CDFG"
},
{
"target_metric": "power"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[29538 chars elided]...
"node_count": 68,
"edge_count": 296,
"graph_properties": {
"node_types": {
"$not": 1,
"ALT_IOBUF": 3,
"system_bd": 1,
"port_input": 13,
"port_output": 39,
"p... | multi_tool | graph_extractor+optimization_advisor | compositional | 8db3cc0a01b5 | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "power"}}] | Question: For system_top, how does the structure shown in its CDFG relate to the power optimization advice — what kinds of elements are in the design and what power savings are estimated if I follow the suggestions?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[29538 cha... | c0fe0bccdccf | 6bd34c4335c6 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "projects/ad4062_ardz/de10nano/system_top.v",
"sha256": "2291b6aa09523f11476992dab33f599826dab064afd9cf491da58b413a31eb38"
} |
For the IDELAYE2 module, how does its CDFG structure relate to the synthesis results, and what does this tell us about the kind of module it is? | The CDFG for IDELAYE2 has 12 nodes (10 input ports and 2 output ports) with 0 edges and an average degree of 0.0, indicating no internal logic connectivity. This is consistent with the synthesis results showing 0 cells, 0 gates, area 0, delay 0.0, and power 0.0, with only 13 wires and 52 wire bits across 12 ports and 2... | github_repos/aolofsson_oh/xilibs/dv/IDELAYE2.v | IDELAYE2 | graph_extractor+synthesis_tool | [
{
"graph_type": "CDFG"
},
{
"optimization_level": "medium"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[252 chars elided]...
"node_count": 12,
"edge_count": 0,
"graph_properties": {
"node_types": {
"port_output": 2,
"port_input": 10
},
"avg_degree": 0.0,
"module_name": "IDELAYE2"
},
"error":... | multi_tool | graph_extractor+synthesis_tool | compositional | 0f95b7c97025 | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the IDELAYE2 module, how does its CDFG structure relate to the synthesis results, and what does this tell us about the kind of module it is?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[252 chars elided]...
"node_count": 12,
"edge_count": 0,
"graph_p... | 1cace5edef5b | 6bf77d695099 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "xilibs/dv/IDELAYE2.v",
"sha256": "df9fa142e3f56f440f52b1e0aed8045b3c380a552ebb0257a5d255b797509acd"
} |
For mlab_delay, the and-inverter graph (AIG) analysis reports a certain mix of node types and the area-focused optimization study reports expected trade-offs: how do the structural findings and the optimization estimates together argue for or against aggressive resource sharing in this module? | The AIG for mlab_delay contains 1654 nodes and 6976 edges, including 699 $_AND_ nodes, 917 $_NOT_ nodes, 23 mlab_sr_cells and 8 $_DFFE_PP_ elements, so sharing is aimed at a large combinational cloud. The area optimization estimates -15.0 area and -10.0 power improvement but a 5.0 delay penalty, and it warns that aggre... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/storage/mlab_delay.v | mlab_delay | graph_extractor+optimization_advisor | [
{
"graph_type": "AIG"
},
{
"target_metric": "area"
}
] | [graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_type": "AIG",
...[33514 chars elided]...
"node_count": 1654,
"edge_count": 6976,
"graph_properties": {
"node_types": {
"$_AND_": 699,
"$_NOT_": 917,
"$_DFFE_PP_": 8,
"insert_parity": 1,
"mlab_sr_cells": 23,... | multi_tool | graph_extractor+optimization_advisor | compositional | be7625ffb16f | [{"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}] | Question: For mlab_delay, the and-inverter graph (AIG) analysis reports a certain mix of node types and the area-focused optimization study reports expected trade-offs: how do the structural findings and the optimization estimates together argue for or against aggressive resource sharing in this module?
[graph_extract... | 82de22a53560 | 6c188fb66787 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/storage/mlab_delay.v",
"sha256": "8095b8b5012df57a7e8b2ee7c8d9045b3f257ab27a63af24bee18e873b12c7c2"
} |
For the gray_plus_one module, how do the complexity metrics relate to the state of the RTL-to-netlist mapping, and what does that suggest about the design? | The gray_plus_one module is quite complex, with 371 operators, a cyclomatic complexity of 10, and a nesting depth of 6 across 55 lines of code, yet the RTL-to-netlist mapping shows 0 of 1 RTL signals mapped with an alignment score of 0.0 and the clk signal left unmapped across 34 netlist wires. This suggests that despi... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/counter/gray_cntr.v | gray_plus_one | cross_stage_mapper+static_analyzer | [
{},
{
"analysis_type": "full"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"clk": []
},
"alignment_score": 0.0,
"unmapped_elements": [
"clk"
],
"mapping_statistics": {
"rtl_signals": 1,
"netlist_wires": 34,
"netlist_cells": 0,
"mapped_signals": 0,
"unmapped_signals": 1
},
"... | multi_tool | cross_stage_mapper+static_analyzer | compositional | 8ea3ab4e9edd | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the gray_plus_one module, how do the complexity metrics relate to the state of the RTL-to-netlist mapping, and what does that suggest about the design?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"clk": []
},
"alignment_score": 0.0,
"unmapped_elements": [
... | 3568a0026dde | 6c606b2a371b | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/counter/gray_cntr.v",
"sha256": "2dc3f790b89dbfd95a33571d39b2c6d59594103f6ea8fc27891d4e12de6b30b1"
} |
For the fpga_core module, if I apply the power optimization suggestions and re-synthesize, how would the estimated post-optimization power compare to the current synthesis figures, and what trade-offs should I expect? | The current synthesis of fpga_core reports a power of 0.001 with a delay of 50.0 and an area of 1.0 (a single example_core_pcie_s10 cell). Applying the clock-gating and operand-isolation suggestions is estimated to improve power by -25.0 while also improving area and delay by 5.0 each, though it may add area overhead a... | github_repos/corundum_corundum/fpga/lib/pcie/example/520N_MX/fpga/rtl/fpga_core.v | fpga_core | optimization_advisor+synthesis_tool | [
{
"target_metric": "power"
},
{
"optimization_level": "medium"
}
] | [optimization_advisor {"target_metric": "power"}]
{
"status": "success",
"target_metric": "power",
"recommended_recipes": [
"synth -top fpga_core",
"opt; share; opt",
"abc -g gates -liberty stdcells.lib",
"opt_clean; clockgate"
],
"optimization_suggestions": [
{
"type": "clock_gating... | multi_tool | optimization_advisor+synthesis_tool | compositional | 5d7547ec6499 | [{"tool": "optimization_advisor", "parameters": {"target_metric": "power"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the fpga_core module, if I apply the power optimization suggestions and re-synthesize, how would the estimated post-optimization power compare to the current synthesis figures, and what trade-offs should I expect?
[optimization_advisor {"target_metric": "power"}]
{
"status": "success",
"target_metric... | 6445afe12969 | 6bd5e5de0d54 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/pcie/example/520N_MX/fpga/rtl/fpga_core.v",
"sha256": "d51f82a3b22cc1797ba32909d8da2f3ab8144bfdc4e0bd641198339b989219ac"
} |
For the BUFGCE module, the RTL-to-netlist mapping left clk_en_af_latch unmapped — is that consistent with what synthesis produced, and given the delay-optimized synthesis results and the module's static complexity metrics, how would you summarize the design's implementability? | Yes, it is consistent: BUFGCE has an alignment score of 85.71 with 6 mapped signals and only clk_en_af_latch unmapped, and synthesis produced just 2 cells ($_AND_ and $_DLATCH_N_), so the latch-based clock-enable logic survived into the netlist. The design is small and simple — 36 lines of code, cyclomatic complexity 3... | github_repos/XUANTIE-RV_openc910/smart_run/logical/common/BUFGCE.v | BUFGCE | cross_stage_mapper+static_analyzer+synthesis_tool | [
{},
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"I": [
"I"
],
"external_en": [
"external_en"
],
"CE": [
"CE"
],
"clk_en_af_latch": [],
"O": [
"O"
],
"clk_in": [
"clk_in"
],
"clk_en": [
"clk_en"
]
},
... | multi_tool | cross_stage_mapper+static_analyzer+synthesis_tool | compositional | 8ec7d61bb59f | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the BUFGCE module, the RTL-to-netlist mapping left clk_en_af_latch unmapped — is that consistent with what synthesis produced, and given the delay-optimized synthesis results and the module's static complexity metrics, how would you summarize the design's implementability?
[cross_stage_mapper {}]
{
"st... | c400a2d28fa5 | 6cd3b9a02cf7 | train | glm-5.3 | 3 | 3,300 | {
"repository": "https://github.com/XUANTIE-RV/openc910",
"commit": "b91c90914c19f114d35c8f6b73408eb241ed847c",
"path": "smart_run/logical/common/BUFGCE.v",
"sha256": "7c31df09bdbeac61a35c17889a78762f48172f2b85b06a5238041b3f924a064d"
} |
For oh_or4, how does the CDFG structure compare with the code-level complexity — specifically, how many OR operations and edges does the control/data-flow graph contain versus the number of assign statements and operators reported in the source? | The CDFG for oh_or4 contains 3 $or nodes, 4 input ports and 1 output port, with 8 nodes, 9 edges and average degree 1.12. The source has only 1 assign statement but 24 operators, with cyclomatic complexity 1 and 10 lines of code. This shows the single continuous assignment expands into a chain of three OR gates in the ... | github_repos/aolofsson_oh/stdlib/rtl/oh_or4.v | oh_or4 | graph_extractor+static_analyzer | [
{
"graph_type": "CDFG"
},
{
"analysis_type": "full"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[1736 chars elided]...
"node_count": 8,
"edge_count": 9,
"graph_properties": {
"node_types": {
"$or": 3,
"port_input": 4,
"port_output": 1
},
"avg_degree": 1.12,
"module_name": "oh_or4"
... | multi_tool | graph_extractor+static_analyzer | compositional | 17d99753e8b3 | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For oh_or4, how does the CDFG structure compare with the code-level complexity — specifically, how many OR operations and edges does the control/data-flow graph contain versus the number of assign statements and operators reported in the source?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success... | 95433f060ea3 | 6c9b7aa8279d | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "stdlib/rtl/oh_or4.v",
"sha256": "4e4c67196f01bfb1c8468c2281d95a2f866f1f7b8aaac0de1f5fa40c045c72d1"
} |
For the LUT4 module, how does the structure shown in its CDFG relate to its port and complexity profile, and does anything suggest it behaves like a pure combinational lookup despite having regs and an always block? | The CDFG for LUT4 contains 6 nodes and 21 edges, with a single $shiftx node, 4 input ports, and 1 output port, matching the static analysis count of 4 inputs and 1 output (5 total ports). However, the static analysis also reports 2 regs, 1 always block, a cyclomatic complexity of 15, and 299 operators across 38 lines o... | github_repos/pConst_basic_verilog/pacoblaze-2.2/xilinx/unisims/LUT4.v | LUT4 | graph_extractor+static_analyzer | [
{
"graph_type": "CDFG"
},
{
"analysis_type": "full"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[2120 chars elided]...
"node_count": 6,
"edge_count": 21,
"graph_properties": {
"node_types": {
"$shiftx": 1,
"port_output": 1,
"port_input": 4
},
"avg_degree": 3.5,
"module_name": "LUT4"... | multi_tool | graph_extractor+static_analyzer | compositional | 0f4fa7d8cbd1 | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the LUT4 module, how does the structure shown in its CDFG relate to its port and complexity profile, and does anything suggest it behaves like a pure combinational lookup despite having regs and an always block?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...... | e8d43e3b69b8 | 6d1baba47980 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "pacoblaze-2.2/xilinx/unisims/LUT4.v",
"sha256": "f8500cf72d6eaed9e9e520a1d1173b455ace9ed2f2d17beb10decfec13393b08"
} |
For the LUT4 module, the delay-focused optimization advisor suggests changes with estimated area and power trade-offs — does it make sense to apply them given what synthesis reports about the current design? | Probably not: synthesis reports 0 cells, 0.0 ns delay, and 0.0 power for LUT4 (it is purely structural, with 11 wires / 19 wire bits and no logic to optimize), while the delay optimization would still cost an estimated 10.0% area increase and 5.0% power increase for only a -20.0% delay change on an already-zero critica... | github_repos/pConst_basic_verilog/pacoblaze-2.2/xilinx/unisims/LUT4.v | LUT4 | optimization_advisor+synthesis_tool | [
{
"target_metric": "delay"
},
{
"optimization_level": "medium"
}
] | [optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metric": "delay",
"recommended_recipes": [
"synth -top LUT4",
"opt -fast",
"abc -fast -liberty stdcells.lib",
"opt_clean"
],
"optimization_suggestions": [
{
"type": "pipeline_insertion",
"descripti... | multi_tool | optimization_advisor+synthesis_tool | compositional | e9875c7bda7d | [{"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the LUT4 module, the delay-focused optimization advisor suggests changes with estimated area and power trade-offs — does it make sense to apply them given what synthesis reports about the current design?
[optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metric": "delay"... | b655de46152d | 6d1baba47980 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "pacoblaze-2.2/xilinx/unisims/LUT4.v",
"sha256": "f8500cf72d6eaed9e9e520a1d1173b455ace9ed2f2d17beb10decfec13393b08"
} |
For the oh_or4 module, how do the synthesized results compare with the delay-focused optimization advice — is the critical path worth improving, and what trade-offs would that involve? | After synthesis oh_or4 uses 3 gates (1 NAND and 2 NOR) with a critical path of 55.62, an area of 3.0, and power of 0.003. The delay optimization analysis suggests recipes like opt -fast and abc -fast, estimating a delay improvement of -20.0 but at the cost of about 10.0 more area and 5.0 more power, so the small design... | github_repos/aolofsson_oh/stdlib/rtl/oh_or4.v | oh_or4 | optimization_advisor+synthesis_tool | [
{
"target_metric": "delay"
},
{
"optimization_level": "medium"
}
] | [optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metric": "delay",
"recommended_recipes": [
"synth -top oh_or4",
"opt -fast",
"abc -fast -liberty stdcells.lib",
"opt_clean"
],
"optimization_suggestions": [
{
"type": "pipeline_insertion",
"descrip... | multi_tool | optimization_advisor+synthesis_tool | compositional | 94467235c19f | [{"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the oh_or4 module, how do the synthesized results compare with the delay-focused optimization advice — is the critical path worth improving, and what trade-offs would that involve?
[optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metric": "delay",
"recommended_recipe... | 1630233ed5e3 | 6c9b7aa8279d | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "stdlib/rtl/oh_or4.v",
"sha256": "4e4c67196f01bfb1c8468c2281d95a2f866f1f7b8aaac0de1f5fa40c045c72d1"
} |
For pwm_ctrl_rom, do the RTL signals and netlist wires fully correspond after synthesis, and does that match the port count reported for the module? | Yes — the RTL-to-netlist mapping shows all 3 signals (address, clk, instruction) mapped with an alignment score of 100.0 and 0 unmapped signals, matching the static analysis of pwm_ctrl_rom, which reports exactly 3 ports (2 inputs, 1 output) and instantiates one RAMB16_S18 with cyclomatic complexity 1. | github_repos/pConst_basic_verilog/pacoblaze-2.2/test/pwm_ctrl_rom.v | pwm_ctrl_rom | cross_stage_mapper+static_analyzer | [
{},
{
"analysis_type": "full"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"address": [
"address"
],
"clk": [
"clk"
],
"instruction": [
"instruction"
]
},
"alignment_score": 100.0,
"unmapped_elements": [],
"mapping_statistics": {
"rtl_signals": 3,
"netlist_w... | multi_tool | cross_stage_mapper+static_analyzer | compositional | bc8ba5aefdee | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For pwm_ctrl_rom, do the RTL signals and netlist wires fully correspond after synthesis, and does that match the port count reported for the module?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"address": [
"address"
],
"clk": [
"clk"
],
"inst... | 47e55a7d77c7 | 6d443c1e1eaa | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "pacoblaze-2.2/test/pwm_ctrl_rom.v",
"sha256": "af5b32b66622b9c116e923e6670a863fb7104d2c729fc9165076d4eee46c57fc"
} |
For the eth_mac_10g_fifo module, the delay-optimized synthesis reports a delay of 146.0 and a power of 0.021 — considering that the RTL passes lint with no warnings despite a cyclomatic complexity of 13, would you say the delay/power cost is justified by the code's structure, and can you summarize the key figures (area... | The eth_mac_10g_fifo module passes lint with zero warnings despite a cyclomatic complexity of 13 and nesting depth of 16 across 424 lines of code, and it carries 41 total ports with 45 signals (37 wires, 8 regs). Synthesis yields an area of 27.0 with 21 gates and 70 wires, and its delay-optimized critical path is 146.0... | github_repos/corundum_corundum/fpga/lib/eth/rtl/eth_mac_10g_fifo.v | eth_mac_10g_fifo | static_analyzer+synthesis_tool | [
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "eth_mac_10g_fifo",
"port_count": {
"inputs": 21,
"outputs": 20,
"inouts": 0,
"total": 41
},
"signal_count": {
"wires": 37,
"regs": 8,
"parameters": 32,
"total": 45
},
"always_blocks": 4,
"a... | multi_tool | static_analyzer+synthesis_tool | compositional | cfe8178f93db | [{"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the eth_mac_10g_fifo module, the delay-optimized synthesis reports a delay of 146.0 and a power of 0.021 — considering that the RTL passes lint with no warnings despite a cyclomatic complexity of 13, would you say the delay/power cost is justified by the code's structure, and can you summarize the key fig... | c97f35a78e44 | 6d3b04700964 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/eth/rtl/eth_mac_10g_fifo.v",
"sha256": "7a28b8b406789b00d1c23d40f0e6570239d62a8e5bee9b9e04fb17b5dee1e7a3"
} |
For axi_fifo, how does the structure shown in its AIG (and its instantiation of the read and write FIFO submodules) relate to the synthesis results for area and delay — can you summarize the module's structural and physical figures together? | The AIG for axi_fifo contains 92 nodes and 490 edges with an average degree of 5.33, including one axi_fifo_rd and one axi_fifo_wr instance among 46 input ports and 44 output ports. Synthesis kept those same two cells (one axi_fifo_rd and one axi_fifo_wr) with 90 wires and 488 wire bits, giving an area of 2.0, a gate c... | github_repos/corundum_corundum/fpga/lib/axi/rtl/axi_fifo.v | axi_fifo | graph_extractor+synthesis_tool | [
{
"graph_type": "AIG"
},
{
"optimization_level": "medium"
}
] | [graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_type": "AIG",
...[35429 chars elided]...
"node_count": 92,
"edge_count": 490,
"graph_properties": {
"node_types": {
"axi_fifo_rd": 1,
"axi_fifo_wr": 1,
"port_input": 46,
"port_output": 44
},
"avg_degree":... | multi_tool | graph_extractor+synthesis_tool | compositional | bbcb4658bfb9 | [{"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For axi_fifo, how does the structure shown in its AIG (and its instantiation of the read and write FIFO submodules) relate to the synthesis results for area and delay — can you summarize the module's structural and physical figures together?
[graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
... | 7251e36de194 | 6d9980827f80 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/axi/rtl/axi_fifo.v",
"sha256": "bae5ea55dcd8c145a56d75931c555697d284a5c7972c0914ac12df4a452cc71d"
} |
For the axi_fifo module, how do its CDFG structure and the power-focused optimization opportunities together shape what I should consider before applying clock gating, and can you summarize the key figures? | The axi_fifo CDFG contains 92 nodes and 490 edges with an average degree of 5.33, including one axi_fifo_rd and one axi_fifo_wr instance plus 46 input and 44 output ports, so its register-heavy structure makes the recommended clock gating attractive. The power optimization is estimated to improve power by -25.0 at the ... | github_repos/corundum_corundum/fpga/lib/axi/rtl/axi_fifo.v | axi_fifo | graph_extractor+optimization_advisor | [
{
"graph_type": "CDFG"
},
{
"target_metric": "power"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[35430 chars elided]...
"node_count": 92,
"edge_count": 490,
"graph_properties": {
"node_types": {
"axi_fifo_rd": 1,
"axi_fifo_wr": 1,
"port_input": 46,
"port_output": 44
},
"avg_degree... | multi_tool | graph_extractor+optimization_advisor | compositional | b6d580a8075c | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "power"}}] | Question: For the axi_fifo module, how do its CDFG structure and the power-focused optimization opportunities together shape what I should consider before applying clock gating, and can you summarize the key figures?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[35430 ch... | 411970087112 | 6d9980827f80 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/axi/rtl/axi_fifo.v",
"sha256": "bae5ea55dcd8c145a56d75931c555697d284a5c7972c0914ac12df4a452cc71d"
} |
For the f_spsram_32768x128 module, how does its CDFG structure relate to the delay optimization recommendations, and what trade-offs should I expect if I follow them? | The CDFG of f_spsram_32768x128 has 57 nodes and 687 edges, including 16 $logic_and nodes, 17 $logic_not nodes, and 16 ram nodes with an average degree of 12.05, and the delay optimization guidance suggests register retiming and logic duplication to reduce fanout. Following these is estimated to improve delay by -20.0 w... | github_repos/XUANTIE-RV_openc910/smart_run/logical/mem/f_spsram_32768x128.v | f_spsram_32768x128 | graph_extractor+optimization_advisor | [
{
"graph_type": "CDFG"
},
{
"target_metric": "delay"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[43120 chars elided]...
"node_count": 57,
"edge_count": 687,
"graph_properties": {
"node_types": {
"$logic_and": 16,
"$logic_not": 17,
"$mux": 1,
"$dff": 1,
"ram": 16,
"port_input":... | multi_tool | graph_extractor+optimization_advisor | compositional | 33fb4dd17d5d | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}] | Question: For the f_spsram_32768x128 module, how does its CDFG structure relate to the delay optimization recommendations, and what trade-offs should I expect if I follow them?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[43120 chars elided]...
"node_count": 57,
"ed... | aefaf02abc10 | 6d63e7bada6d | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/XUANTIE-RV/openc910",
"commit": "b91c90914c19f114d35c8f6b73408eb241ed847c",
"path": "smart_run/logical/mem/f_spsram_32768x128.v",
"sha256": "c6e994079845dfee1ab788b4c51a4080b84fcc29910e78c7e7f4e3f977f7e338"
} |
For Standard_Cell_CLK_GATE, the RTL-to-netlist cross-stage mapping reports some unmapped signals — how do these compare with what the synthesized netlist actually contains in terms of cells and wires, and does the mapping alignment score seem consistent with that? | The mapping left 4 of 10 RTL signals unmapped (q_tmp, D1, D0, X) for an alignment score of 60.0, while synthesis of Standard_Cell_CLK_GATE produced only 3 cells (one $_AND_, one $_DLATCH_N_, one $_OR_) with 6 wires and 6 wire bits. The unmapped signals correspond exactly to internal/scan-related signals like q_tmp and ... | github_repos/XUANTIE-RV_wujian100_open/soc/sim_lib/STD_CELL.v | Standard_Cell_CLK_GATE | cross_stage_mapper+synthesis_tool | [
{},
{
"optimization_level": "medium"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"q_tmp": [],
"EN": [
"EN"
],
"E": [
"EN",
"E",
"SE"
],
"S": [
"SE"
],
"SE": [
"SE"
],
"D1": [],
"D0": [],
"X": [],
"Q": [
"Q"
],
"CK": [
... | multi_tool | cross_stage_mapper+synthesis_tool | compositional | aa01a048671b | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For Standard_Cell_CLK_GATE, the RTL-to-netlist cross-stage mapping reports some unmapped signals — how do these compare with what the synthesized netlist actually contains in terms of cells and wires, and does the mapping alignment score seem consistent with that?
[cross_stage_mapper {}]
{
"status": "succe... | 607a77a4094d | 6d99feb515ae | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/XUANTIE-RV/wujian100_open",
"commit": "83e297583bb3454b688f9f27d6bc20ff3276ad32",
"path": "soc/sim_lib/STD_CELL.v",
"sha256": "4fcce27c84d197d4bd4c2b774fd58663fa98ad380328291a96116b3be7ca2bfd"
} |
For the crc24_dat64 module, given the synthesis results and the area-focused optimization advice, would applying the recommended area optimization be worthwhile, considering its estimated impact on delay and power against the current figures? | The current synthesis of crc24_dat64 uses 139 xor6 gates plus one crc24_dat64_factor instance, with an area of 140.0, delay of 220.2, and power of 0.14. Applying the recommended area recipes (e.g., aggressive resource sharing of arithmetic operators) is estimated to improve area by -15.0 and power by -10.0, but at the ... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/crc/crc24_dat64.v | crc24_dat64 | optimization_advisor+synthesis_tool | [
{
"target_metric": "area"
},
{
"optimization_level": "medium"
}
] | [optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommended_recipes": [
"synth -top crc24_dat64 -flatten",
"opt -full; share -aggressive; opt",
"abc -g gates -liberty stdcells.lib",
"opt_clean -purge"
],
"optimization_suggestions": [
{
... | multi_tool | optimization_advisor+synthesis_tool | compositional | 832d881faf5c | [{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the crc24_dat64 module, given the synthesis results and the area-focused optimization advice, would applying the recommended area optimization be worthwhile, considering its estimated impact on delay and power against the current figures?
[optimization_advisor {"target_metric": "area"}]
{
"status": "su... | ad128a2852ed | 6dbf2e7b48cb | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/crc/crc24_dat64.v",
"sha256": "4ab95b475c2772e606afdd9c6e51ff7ac523af9ced5fe3ee0cb50d03d213443d"
} |
For ohr_reg0, how do the current synthesis results compare to the structure shown by full static analysis, and is the suggested area optimization worthwhile given its estimated effects on area, delay, and power? | Static analysis shows ohr_reg0 is a small design with 3 inputs, 1 output, 1 always block, 1 assign statement, cyclomatic complexity 4, and 45 operators, while synthesis yields just 1 gate (a $_DFF_NN0_ flip-flop), area 1.0, delay 50.0, critical path 50.0, and power 0.001. The area optimization recipe (including aggress... | github_repos/aolofsson_oh/stdlib/rtl/oh_reg0.v | ohr_reg0 | optimization_advisor+static_analyzer+synthesis_tool | [
{
"target_metric": "area"
},
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommended_recipes": [
"synth -top ohr_reg0 -flatten",
"opt -full; share -aggressive; opt",
"abc -g gates -liberty stdcells.lib",
"opt_clean -purge"
],
"optimization_suggestions": [
{
"... | multi_tool | optimization_advisor+static_analyzer+synthesis_tool | compositional | 22527d67ade9 | [{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For ohr_reg0, how do the current synthesis results compare to the structure shown by full static analysis, and is the suggested area optimization worthwhile given its estimated effects on area, delay, and power?
[optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "are... | a54c74160d86 | 6ddcbe1a0ca1 | train | glm-5.3 | 3 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "stdlib/rtl/oh_reg0.v",
"sha256": "ab41ea1ca38d8854909a5094361916417e6ebd17d77757b986bde9a07388aa25"
} |
For the oh_mux12 module, how do the RTL and gate-level views line up: how many input ports and RTL select signals are there, and did the cross-stage mapping cover all of them without lint issues? | oh_mux12 has 12 input ports and 12 RTL select signals, and the RTL-to-netlist mapping covered all 12 mapped signals with 0 unmapped and an alignment score of 100.0. All 12 select signals (sel0 through sel11) map to their netlist counterparts out of 94 netlist wires, and the static analysis reported no lint warnings wit... | github_repos/aolofsson_oh/stdlib/rtl/oh_mux12.v | oh_mux12 | cross_stage_mapper+static_analyzer | [
{},
{
"analysis_type": "full"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"sel7": [
"sel7"
],
"sel0": [
"sel0"
],
"sel6": [
"sel6"
],
"sel10": [
"sel10"
],
"sel3": [
"sel3"
],
"sel5": [
"sel5"
],
"sel1": [
"sel1",
"... | multi_tool | cross_stage_mapper+static_analyzer | compositional | c955e1d92d65 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the oh_mux12 module, how do the RTL and gate-level views line up: how many input ports and RTL select signals are there, and did the cross-stage mapping cover all of them without lint issues?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"sel7": [
"sel7"
],
... | 12d54e52bcf4 | 6df3767dbcfe | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "stdlib/rtl/oh_mux12.v",
"sha256": "09304994ad097830db94e2958aed7af61cffd98b779345447d1953c29151d4dd"
} |
For util_pad, how do the complexity metrics and port/signal counts relate to how well the RTL structure carries over to the netlist, and what does the mapping show about where the logic ends up? | The util_pad module has 42 lines of code with a cyclomatic complexity of 9 and a nesting depth of 10, yet it declares only 1 total port (an output), 0 wires, 0 regs, and 5 parameters across 2 always blocks. The cross-stage mapping found 1 RTL signal and 3 netlist wires but 0 netlist cells, leaving the single signal 're... | github_repos/analogdevicesinc_hdl/library/util_pad/util_pad.v | util_pad | cross_stage_mapper+static_analyzer | [
{},
{
"analysis_type": "full"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"reg": []
},
"alignment_score": 0.0,
"unmapped_elements": [
"reg"
],
"mapping_statistics": {
"rtl_signals": 1,
"netlist_wires": 3,
"netlist_cells": 0,
"mapped_signals": 0,
"unmapped_signals": 1
},
"e... | multi_tool | cross_stage_mapper+static_analyzer | compositional | fdc8ca349d37 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For util_pad, how do the complexity metrics and port/signal counts relate to how well the RTL structure carries over to the netlist, and what does the mapping show about where the logic ends up?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"reg": []
},
"alignment_sco... | 1850695b2f4a | 6dfcc2d161b6 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/util_pad/util_pad.v",
"sha256": "8d0c0e854bc8b8487ae6f9cf4b94ed13eeb1e0b74da044ad03743d720ecf2973"
} |
For the module ohr_reg0, how does the DFG structure compare with the synthesis results — is the register count consistent, and what are the resulting area, delay, and power figures? | The DFG for ohr_reg0 contains 5 nodes and 4 edges with a single $adff flip-flop plus 3 input ports and 1 output port, which matches synthesis exactly: 1 gate ($_DFF_NN0_), 5 wires, area 1.0, delay 50.0 (critical path estimate 50.0), and power 0.001. | github_repos/aolofsson_oh/stdlib/rtl/oh_reg0.v | ohr_reg0 | graph_extractor+synthesis_tool | [
{
"graph_type": "DFG"
},
{
"optimization_level": "medium"
}
] | [graph_extractor {"graph_type": "DFG"}]
{
"status": "success",
"graph_type": "DFG",
...[51 chars elided]...
"node_count": 5,
"edge_count": 4,
"graph_properties": {
"node_types": {
"$adff": 1,
"port_input": 3,
"port_output": 1
},
"avg_degree": 0.8,
"module_name": "ohr_reg0"
... | multi_tool | graph_extractor+synthesis_tool | compositional | 58a7d7b114e2 | [{"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the module ohr_reg0, how does the DFG structure compare with the synthesis results — is the register count consistent, and what are the resulting area, delay, and power figures?
[graph_extractor {"graph_type": "DFG"}]
{
"status": "success",
"graph_type": "DFG",
...[51 chars elided]...
"node_count":... | 18c5935c4771 | 6ddcbe1a0ca1 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "stdlib/rtl/oh_reg0.v",
"sha256": "ab41ea1ca38d8854909a5094361916417e6ebd17d77757b986bde9a07388aa25"
} |
For crc24_dat64, how does the structure seen in its CDFG compare with the reported RTL-level complexity and the mapping result, and what does that suggest about whether the design is fully synthesized yet? | The CDFG of crc24_dat64 contains 146 nodes and 1085 edges, made up of 139 xor6 nodes plus 1 crc24_dat64_factor and 6 ports (4 inputs, 2 outputs), which aligns with the RTL source having 24 assign statements, 1558 operators, 356 lines of code and a cyclomatic complexity of 4. However, the RTL-to-netlist mapping shows an... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/crc/crc24_dat64.v | crc24_dat64 | cross_stage_mapper+graph_extractor+static_analyzer | [
{},
{
"graph_type": "CDFG"
},
{
"analysis_type": "full"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {},
"alignment_score": 0.0,
"unmapped_elements": [],
"mapping_statistics": {
"rtl_signals": 0,
"netlist_wires": 6,
"netlist_cells": 0,
"mapped_signals": 0,
"unmapped_signals": 0
},
"error": null
}
[graph_extracto... | multi_tool | cross_stage_mapper+graph_extractor+static_analyzer | compositional | 4f8e4a9ac581 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For crc24_dat64, how does the structure seen in its CDFG compare with the reported RTL-level complexity and the mapping result, and what does that suggest about whether the design is fully synthesized yet?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {},
"alignment_score": 0... | c5fc1f137711 | 6dbf2e7b48cb | train | glm-5.3 | 3 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/crc/crc24_dat64.v",
"sha256": "4ab95b475c2772e606afdd9c6e51ff7ac523af9ced5fe3ee0cb50d03d213443d"
} |
For the oh_dffsq module, how does the source-level complexity (cyclomatic complexity and operator count) compare to the final synthesized implementation in terms of area, gate count, and critical path delay, and what does that suggest about the design? | The oh_dffsq module has a cyclomatic complexity of 3 with 26 operators over 13 lines of code, yet it synthesizes to just 1 gate ($_DFF_PN1_) with area 1.0 and a critical path delay of 50.0, plus power of 0.001. This shows that despite the nontrivial source-level logic complexity, the design collapses to a single negati... | github_repos/aolofsson_oh/stdlib/rtl/oh_dffsq.v | oh_dffsq | static_analyzer+synthesis_tool | [
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "oh_dffsq",
"port_count": {
"inputs": 0,
"outputs": 1,
"inouts": 0,
"total": 1
},
"signal_count": {
"wires": 0,
"regs": 0,
"parameters": 1,
"total": 0
},
"always_blocks": 1,
"assign_statemen... | multi_tool | static_analyzer+synthesis_tool | compositional | 4ec17f231e81 | [{"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the oh_dffsq module, how does the source-level complexity (cyclomatic complexity and operator count) compare to the final synthesized implementation in terms of area, gate count, and critical path delay, and what does that suggest about the design?
[static_analyzer {"analysis_type": "full"}]
{
"status"... | 54fa05e69bd6 | 6e092613c0ea | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "stdlib/rtl/oh_dffsq.v",
"sha256": "c342cc258b140f10cd5dee2cd3cb4efc0142a540010d8bff961ca83258703540"
} |
For the module ct_spsram_2048x144, how is it structured at the gate level according to its AIG, and what area-optimization trade-offs would apply if I pursued the suggested area reductions? | The AIG for ct_spsram_2048x144 shows the module is essentially a single ct_f_spsram_2048x144 instance with 6 input ports and 1 output port, giving 8 nodes, 446 edges, and an average degree of 55.75. The area-focused optimization recipes (including aggressive resource sharing) are estimated to reduce area by -15.0 and p... | github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/l2c/rtl/ct_spsram_2048x144.v | ct_spsram_2048x144 | graph_extractor+optimization_advisor | [
{
"graph_type": "AIG"
},
{
"target_metric": "area"
}
] | [graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_type": "AIG",
...[24655 chars elided]...
"node_count": 8,
"edge_count": 446,
"graph_properties": {
"node_types": {
"ct_f_spsram_2048x144": 1,
"port_input": 6,
"port_output": 1
},
"avg_degree": 55.75,
"modul... | multi_tool | graph_extractor+optimization_advisor | compositional | 5b79351a7359 | [{"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}] | Question: For the module ct_spsram_2048x144, how is it structured at the gate level according to its AIG, and what area-optimization trade-offs would apply if I pursued the suggested area reductions?
[graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_type": "AIG",
...[24655 chars elided]...
"n... | a8d29ed129a0 | 6e443c2742ea | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/XUANTIE-RV/openc910",
"commit": "b91c90914c19f114d35c8f6b73408eb241ed847c",
"path": "C910_RTL_FACTORY/gen_rtl/l2c/rtl/ct_spsram_2048x144.v",
"sha256": "136d814a8b9081523c4204903babd5bd858d652087e41d4513372514071e2f19"
} |
For the udp_ip_tx_64 module, summarize how its code complexity relates to the synthesized hardware: given its 458 lines of code, cyclomatic complexity of 43, and 68 total ports, what circuit did synthesis produce in terms of gate count, delay, and power, and do the static-analysis signal counts (56 wires and 50 regs) s... | Despite only 458 lines of code and cyclomatic complexity 43 across 68 ports, udp_ip_tx_64 synthesizes to 1904 gates with a delay of 773.32 and power of 1.904, including 572 $_DFFE_PP_ flip-flops, which exceeds the 50 regs found in static analysis because synthesis infers registers from the 4 always blocks and expands l... | github_repos/alexforencich_verilog-ethernet/rtl/udp_ip_tx_64.v | udp_ip_tx_64 | static_analyzer+synthesis_tool | [
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "udp_ip_tx_64",
"port_count": {
"inputs": 35,
"outputs": 33,
"inouts": 0,
"total": 68
},
"signal_count": {
"wires": 56,
"regs": 50,
"parameters": 0,
"total": 106
},
"always_blocks": 4,
"assi... | multi_tool | static_analyzer+synthesis_tool | compositional | 79ecf06a310d | [{"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the udp_ip_tx_64 module, summarize how its code complexity relates to the synthesized hardware: given its 458 lines of code, cyclomatic complexity of 43, and 68 total ports, what circuit did synthesis produce in terms of gate count, delay, and power, and do the static-analysis signal counts (56 wires and ... | c00f217de6f6 | 6e8190c23132 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/alexforencich/verilog-ethernet",
"commit": "77320a9471d19c7dd383914bc049e02d9f4f1ffb",
"path": "rtl/udp_ip_tx_64.v",
"sha256": "e3bb0ebd4c7f0c1d9753dcea3940809ac7a747d681e7d3cb9c5744f7aa4088fc"
} |
For pipeline_add_msb, how does the structure shown in its CDFG relate to the delay optimization advice — in particular, what do the node counts and the suggested pipelining imply about where the delay improvement would come from? | The CDFG for pipeline_add_msb has 12 nodes and 176 edges with an average degree of 14.67, containing 2 $add and 4 $adff nodes, so the combinational $add operations are the likely critical paths that the delay-targeted optimization targets. The delay optimization proposes register retiming/pipelining of arithmetic opera... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/arithmetic/pipeline_add_msb.v | pipeline_add_msb | graph_extractor+optimization_advisor | [
{
"graph_type": "CDFG"
},
{
"target_metric": "delay"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[18381 chars elided]...
"node_count": 12,
"edge_count": 176,
"graph_properties": {
"node_types": {
"$add": 2,
"$adff": 4,
"port_input": 4,
"port_output": 2
},
"avg_degree": 14.67,
"... | multi_tool | graph_extractor+optimization_advisor | compositional | ad3791bddc52 | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}] | Question: For pipeline_add_msb, how does the structure shown in its CDFG relate to the delay optimization advice — in particular, what do the node counts and the suggested pipelining imply about where the delay improvement would come from?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type... | 65e322d5a878 | 6e3e2b9cd4d2 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/arithmetic/pipeline_add_msb.v",
"sha256": "e23caaeb71faf3cab7423642a60c5040a67eb065aca3d637c47c425438c1b2e0"
} |
For the approx_fp_div module, how do the post-synthesis area, delay, and power figures compare against the delay-focused optimization advisor's estimates, and what pipelining or fanout-related changes does it suggest given that the CDFG (if available) — or otherwise the structural analysis — shows no memories or proces... | The synthesized approx_fp_div design reports an area of 813.5, delay of 566.06, and power of 0.308, while the delay-optimization advisor estimates trade-offs of area +10.0, delay -20.0, and power 5.0. Given the purely structural cell-based implementation (308 cells, 0 memories, 0 processes), the advisor suggests regist... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/float/approx_fp_div.v | approx_fp_div | optimization_advisor+synthesis_tool | [
{
"target_metric": "delay"
},
{
"optimization_level": "medium"
}
] | [optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metric": "delay",
"recommended_recipes": [
"synth -top approx_fp_div",
"opt -fast",
"abc -fast -liberty stdcells.lib",
"opt_clean"
],
"optimization_suggestions": [
{
"type": "pipeline_insertion",
"... | multi_tool | optimization_advisor+synthesis_tool | compositional | 2bc1314edc0a | [{"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the approx_fp_div module, how do the post-synthesis area, delay, and power figures compare against the delay-focused optimization advisor's estimates, and what pipelining or fanout-related changes does it suggest given that the CDFG (if available) — or otherwise the structural analysis — shows no memories... | 57477baff919 | 6e85498e8def | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/float/approx_fp_div.v",
"sha256": "1d7c4ac05fe1d781ef146ac28ea8cc3a6679d3fb7df82a58cb99240d863ffb18"
} |
For the udp_ip_tx_64 module, if I apply the power optimization suggestions (clock gating and operand isolation), what is the estimated improvement, and how does that relate to the module's current synthesis figures? | The power optimization recipes for udp_ip_tx_64 are estimated to reduce power by -25.0 with an area and delay improvement of 5.0 each, though clock gating adds timing complexity. The current synthesis reports area 4300.5, delay 773.32, power 1.904, and 1904 gates across 572 $_DFFE_PP_ flip-flops, which is why clock gat... | github_repos/alexforencich_verilog-ethernet/rtl/udp_ip_tx_64.v | udp_ip_tx_64 | optimization_advisor+synthesis_tool | [
{
"target_metric": "power"
},
{
"optimization_level": "medium"
}
] | [optimization_advisor {"target_metric": "power"}]
{
"status": "success",
"target_metric": "power",
"recommended_recipes": [
"synth -top udp_ip_tx_64",
"opt; share; opt",
"abc -g gates -liberty stdcells.lib",
"opt_clean; clockgate"
],
"optimization_suggestions": [
{
"type": "clock_gat... | multi_tool | optimization_advisor+synthesis_tool | compositional | 6730af8f08f4 | [{"tool": "optimization_advisor", "parameters": {"target_metric": "power"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the udp_ip_tx_64 module, if I apply the power optimization suggestions (clock gating and operand isolation), what is the estimated improvement, and how does that relate to the module's current synthesis figures?
[optimization_advisor {"target_metric": "power"}]
{
"status": "success",
"target_metric":... | 14f2417a6ec6 | 6e8190c23132 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/alexforencich/verilog-ethernet",
"commit": "77320a9471d19c7dd383914bc049e02d9f4f1ffb",
"path": "rtl/udp_ip_tx_64.v",
"sha256": "e3bb0ebd4c7f0c1d9753dcea3940809ac7a747d681e7d3cb9c5744f7aa4088fc"
} |
For axi_xcvrlb_1, how does the module's CDFG structure relate to the area optimization recommendations, and what trade-offs should I expect? | The CDFG of axi_xcvrlb_1 has 129 nodes and 1209 edges with an average degree of 9.37, including 70 $xor nodes, 9 $mux nodes, and 4 $add nodes, which is consistent with the area-focused advice to share multiplexers (muxcover) and share arithmetic operators (share -aggressive). The estimated improvement is -15.0 in area,... | github_repos/analogdevicesinc_hdl/library/xilinx/axi_xcvrlb/axi_xcvrlb_1.v | axi_xcvrlb_1 | graph_extractor+optimization_advisor | [
{
"graph_type": "CDFG"
},
{
"target_metric": "area"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[65824 chars elided]...
"node_count": 129,
"edge_count": 1209,
"graph_properties": {
"node_types": {
"$xor": 70,
"$reduce_or": 1,
"$mux": 9,
"$eq": 3,
"$logic_and": 1,
"$add": 4,
... | multi_tool | graph_extractor+optimization_advisor | compositional | ffbf5493516d | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}] | Question: For axi_xcvrlb_1, how does the module's CDFG structure relate to the area optimization recommendations, and what trade-offs should I expect?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[65824 chars elided]...
"node_count": 129,
"edge_count": 1209,
"graph... | 7f8a65e8493b | 6edcf4761b6e | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/xilinx/axi_xcvrlb/axi_xcvrlb_1.v",
"sha256": "359bcbee615718c5ecd8507287292a304483100fc55f9612b192ff49d251f386"
} |
For the sync_signal module, does the register usage found in the CDFG match what synthesis actually produced, and how does that relate to the module's code complexity? | The static analysis of sync_signal reports a cyclomatic complexity of 2 with 1 always block and 42 operators, and synthesis maps this to exactly 2 $_DFF_P_ flip-flops, consistent with the CDFG showing the 2 register updates (giving a gate count of 2, area 8.0). The synthesized design achieves a critical-path delay of 1... | github_repos/corundum_corundum/fpga/lib/pcie/example/ZCU106/fpga_axi/rtl/sync_signal.v | sync_signal | static_analyzer+synthesis_tool | [
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "sync_signal",
"port_count": {
"inputs": 3,
"outputs": 3,
"inouts": 0,
"total": 6
},
"signal_count": {
"wires": 1,
"regs": 0,
"parameters": 2,
"total": 1
},
"always_blocks": 1,
"assign_state... | multi_tool | static_analyzer+synthesis_tool | compositional | 54dc3af6088f | [{"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the sync_signal module, does the register usage found in the CDFG match what synthesis actually produced, and how does that relate to the module's code complexity?
[static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "sync_signal",
"port_count": {
"inputs": 3,
"... | a1269a4d8dd5 | 6f0cb154332a | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/pcie/example/ZCU106/fpga_axi/rtl/sync_signal.v",
"sha256": "a89c005b14019c94f72fee6308e370044333742bec9494df1fbdd3096988f919"
} |
For the sync_signal module, how well does the RTL-to-netlist signal mapping line up with the structure shown in the DFG, and should I be concerned about the unmapped signals? | The DFG for sync_signal contains 5 nodes and 6 edges with two $dff cells (both 1-bit wide) connected in series between input and output ports, but the mapping only matched 1 of 5 RTL signals (alignment score 20.0), leaving wire, signals, and, and is unmapped. Since the netlist contains 4 wires and 0 cells while the DFG... | github_repos/corundum_corundum/fpga/lib/pcie/example/ZCU106/fpga_axi/rtl/sync_signal.v | sync_signal | cross_stage_mapper+graph_extractor | [
{},
{
"graph_type": "DFG"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"wire": [],
"clk": [
"clk"
],
"signals": [],
"and": [],
"is": []
},
"alignment_score": 20.0,
"unmapped_elements": [
"wire",
"signals",
"and",
"is"
],
"mapping_statistics": {
"rtl_si... | multi_tool | cross_stage_mapper+graph_extractor | compositional | 86b42355fea7 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}] | Question: For the sync_signal module, how well does the RTL-to-netlist signal mapping line up with the structure shown in the DFG, and should I be concerned about the unmapped signals?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"wire": [],
"clk": [
"clk"
],
"si... | 59742bdc47f0 | 6f0cb154332a | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/pcie/example/ZCU106/fpga_axi/rtl/sync_signal.v",
"sha256": "a89c005b14019c94f72fee6308e370044333742bec9494df1fbdd3096988f919"
} |
For the asic_oa33 module, does the port and signal mapping between the RTL and the netlist look complete and consistent, considering both the RTL analysis of the module's ports and the cross-stage signal mapping results? | The static analysis of asic_oa33 reports 6 inputs and 1 output for a total of 7 ports with 1 assign statement and no always blocks, and the cross-stage mapping confirms a 100.0 alignment score with all 7 RTL signals mapped (a0, a1, a2, b0, b1, b2, z) and 0 unmapped signals. The mapping statistics also show 22 netlist w... | github_repos/aolofsson_oh/asiclib/hdl/asic_oa33.v | asic_oa33 | cross_stage_mapper+static_analyzer | [
{},
{
"analysis_type": "full"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"a0": [
"a0"
],
"z": [
"z"
],
"a2": [
"a2"
],
"b0": [
"b0"
],
"b1": [
"b1"
],
"b2": [
"b2"
],
"a1": [
"a1"
]
},
"alignment_score": 100.0,
... | multi_tool | cross_stage_mapper+static_analyzer | compositional | cef6f87e4ed2 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the asic_oa33 module, does the port and signal mapping between the RTL and the netlist look complete and consistent, considering both the RTL analysis of the module's ports and the cross-stage signal mapping results?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"a0":... | 57cf19d6e3db | 6f1ea97a3d39 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "asiclib/hdl/asic_oa33.v",
"sha256": "905ac7286c5f606898b910779da911cf410a951c668023f5a9ade28ac50e5fa9"
} |
For the addsub1 module, the area-focused optimization report suggests trading delay for area — given the module's structure from the static analysis (8 inputs, 6 outputs, 13 assign statements, no always blocks), is applying the aggressive resource sharing recommended by the area advisor worthwhile, and what impact shou... | For addsub1, the area optimization recommends aggressive resource sharing of arithmetic operators and mux sharing, with an estimated area improvement of -15.0 but a delay penalty of 5.0. Since the module is purely combinational (0 always blocks, 13 assign statements) with 14 total ports and 4 internal wires, sharing is... | github_repos/pConst_basic_verilog/pacoblaze-2.2/pacoblaze/addsub.v | addsub1 | optimization_advisor+static_analyzer | [
{
"target_metric": "area"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommended_recipes": [
"synth -top addsub1 -flatten",
"opt -full; share -aggressive; opt",
"abc -g gates -liberty stdcells.lib",
"opt_clean -purge"
],
"optimization_suggestions": [
{
"t... | multi_tool | optimization_advisor+static_analyzer | compositional | d716a42c3cbf | [{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the addsub1 module, the area-focused optimization report suggests trading delay for area — given the module's structure from the static analysis (8 inputs, 6 outputs, 13 assign statements, no always blocks), is applying the aggressive resource sharing recommended by the area advisor worthwhile, and what i... | e2a6a53d09ad | 6f27561caaeb | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "pacoblaze-2.2/pacoblaze/addsub.v",
"sha256": "c8f529ddbcf3c4406bbea18d2fe490d0a96a61ebf46a108ac6f63f2d85b48826"
} |
For the asic_oa33 module, how does the recommended delay optimization compare with the module's current complexity, and is the suggested pipelining likely to be needed given its structure? | The asic_oa33 module is very simple, with 11 lines of code, 6 inputs and 1 output (7 ports total), 1 assign statement, no always blocks, cyclomatic complexity of 1, and 18 operators. Nevertheless, the delay-focused optimization suggests register retiming for pipelining and logic duplication via splitnets -driver, estim... | github_repos/aolofsson_oh/asiclib/hdl/asic_oa33.v | asic_oa33 | optimization_advisor+static_analyzer | [
{
"target_metric": "delay"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metric": "delay",
"recommended_recipes": [
"synth -top asic_oa33",
"opt -fast",
"abc -fast -liberty stdcells.lib",
"opt_clean"
],
"optimization_suggestions": [
{
"type": "pipeline_insertion",
"desc... | multi_tool | optimization_advisor+static_analyzer | compositional | 4dfa4c7754a9 | [{"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the asic_oa33 module, how does the recommended delay optimization compare with the module's current complexity, and is the suggested pipelining likely to be needed given its structure?
[optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metric": "delay",
"recommended_re... | f0390cd4fbcd | 6f1ea97a3d39 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "asiclib/hdl/asic_oa33.v",
"sha256": "905ac7286c5f606898b910779da911cf410a951c668023f5a9ade28ac50e5fa9"
} |
For addsub1, the RTL-to-netlist mapping shows several signals that didn't map over, and a power-targeted optimization run was also done: which signals remain unmapped, and given the estimated power improvement, is the optimization worth accepting given its trade-offs? | In addsub1, the unmapped signals are arrival, required, and LUTs, with 6 of 9 RTL signals mapped for an alignment score of 66.67, while the power optimization estimates a -25.0 change in power but only 5.0 area and 5.0 delay improvement. The optimization is likely worthwhile since the power gain of -25.0 outweighs the ... | github_repos/pConst_basic_verilog/pacoblaze-2.2/pacoblaze/addsub.v | addsub1 | cross_stage_mapper+optimization_advisor | [
{},
{
"target_metric": "power"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"c": [
"c_out",
"c_in",
"oc",
"c"
],
"h_out": [
"h_out"
],
"arrival": [],
"c_out": [
"c_out"
],
"LUTs": [],
"c_in": [
"c_in"
],
"required": [],
"d": [
... | multi_tool | cross_stage_mapper+optimization_advisor | compositional | 90499ca097ac | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "power"}}] | Question: For addsub1, the RTL-to-netlist mapping shows several signals that didn't map over, and a power-targeted optimization run was also done: which signals remain unmapped, and given the estimated power improvement, is the optimization worth accepting given its trade-offs?
[cross_stage_mapper {}]
{
"status": "s... | d500cc7081bf | 6f27561caaeb | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "pacoblaze-2.2/pacoblaze/addsub.v",
"sha256": "c8f529ddbcf3c4406bbea18d2fe490d0a96a61ebf46a108ac6f63f2d85b48826"
} |
For fec_rot_19, how does the DFG structure compare with the RTL-to-netlist signal mapping results, and what does that suggest about which signals carried over? | The DFG for fec_rot_19 contains 84 nodes and 246 edges, with 82 of the nodes being XOR operations plus one input and one output port, giving an average degree of 2.93. Meanwhile, the mapping achieved an alignment score of 66.67 by mapping 2 of 3 RTL signals (c and co) while leaving count unmapped, even though the netli... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/ethernet_fec/fec_rot_19.v | fec_rot_19 | cross_stage_mapper+graph_extractor | [
{},
{
"graph_type": "DFG"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"c": [
"co",
"c"
],
"count": [],
"co": [
"co"
]
},
"alignment_score": 66.67,
"unmapped_elements": [
"count"
],
"mapping_statistics": {
"rtl_signals": 3,
"netlist_wires": 150,
"n... | multi_tool | cross_stage_mapper+graph_extractor | compositional | 26e614b35b34 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}] | Question: For fec_rot_19, how does the DFG structure compare with the RTL-to-netlist signal mapping results, and what does that suggest about which signals carried over?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"c": [
"co",
"c"
],
"count": [],
"co": [
... | c7156d003e23 | 6f94a23374a2 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/ethernet_fec/fec_rot_19.v",
"sha256": "27a23055df2e0994a3e4b8740a3dffab49fc3a999ae414bc866c0b33f1879ead"
} |
For fec_rot_19, how does the CDFG structure compare with the synthesized netlist, and are the RTL signals well preserved through synthesis, particularly regarding the carry signals and the unmapped count signal? | The CDFG for fec_rot_19 contains 84 nodes (82 $xor plus one input and one output port) and 246 edges with an average degree of 2.93, while synthesis produced 58 gates (46 $_XNOR_ and 12 $_XOR_), 36 wires and 98 wire bits. The cross-stage mapping only preserved 2 of 3 RTL signals (c and co, with c mapped to co and c), l... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/ethernet_fec/fec_rot_19.v | fec_rot_19 | cross_stage_mapper+graph_extractor+synthesis_tool | [
{},
{
"graph_type": "CDFG"
},
{
"optimization_level": "medium"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"c": [
"co",
"c"
],
"count": [],
"co": [
"co"
]
},
"alignment_score": 66.67,
"unmapped_elements": [
"count"
],
"mapping_statistics": {
"rtl_signals": 3,
"netlist_wires": 150,
"n... | multi_tool | cross_stage_mapper+graph_extractor+synthesis_tool | compositional | 74d7d798c909 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For fec_rot_19, how does the CDFG structure compare with the synthesized netlist, and are the RTL signals well preserved through synthesis, particularly regarding the carry signals and the unmapped count signal?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"c": [
"... | bf70e3280e65 | 6f94a23374a2 | train | glm-5.3 | 3 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/ethernet_fec/fec_rot_19.v",
"sha256": "27a23055df2e0994a3e4b8740a3dffab49fc3a999ae414bc866c0b33f1879ead"
} |
For asic_clkor2, given that the module is purely combinational with just 1 assign statement and cyclomatic complexity 1, is it worth applying the aggressive area optimization flow, and what trade-off should I watch for? | Since asic_clkor2 is very small (7 lines of code, cyclomatic complexity 1, 1 assign statement, 3 total ports), the aggressive area flow (including share -aggressive and opt -full) offers an estimated area improvement of -15.0 and power improvement of -10.0, but at the cost of a 5.0 delay increase. Given the low complex... | github_repos/aolofsson_oh/asiclib/hdl/asic_clkor2.v | asic_clkor2 | optimization_advisor+static_analyzer | [
{
"target_metric": "area"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommended_recipes": [
"synth -top asic_clkor2 -flatten",
"opt -full; share -aggressive; opt",
"abc -g gates -liberty stdcells.lib",
"opt_clean -purge"
],
"optimization_suggestions": [
{
... | multi_tool | optimization_advisor+static_analyzer | compositional | 98d1f1fcb830 | [{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For asic_clkor2, given that the module is purely combinational with just 1 assign statement and cyclomatic complexity 1, is it worth applying the aggressive area optimization flow, and what trade-off should I watch for?
[optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metri... | 7b5d0f8756b9 | 6f9caf6428cb | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "asiclib/hdl/asic_clkor2.v",
"sha256": "dd5fb823dc290e6037a1b652bb37db50e7433f8aeb114ff32cc712ebbd31963c"
} |
For the ct_mmu_iplru module, how well did the RTL signals survive into the netlist mapping, and how does that mapping coverage compare to the module's overall RTL complexity? | In ct_mmu_iplru all 201 RTL signals mapped successfully to the netlist (3309 netlist wires), giving an alignment score of 100.0 with 0 unmapped signals, despite the RTL being quite complex with 943 lines of code, a cyclomatic complexity of 166, and 2552 operators. The static analysis confirms the same 201 total signals... | github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/mmu/rtl/ct_mmu_iplru.v | ct_mmu_iplru | cross_stage_mapper+static_analyzer | [
{},
{
"analysis_type": "full"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"p22_write_updt_val": [
"p22_write_updt_val"
],
"p35_write_updt_val": [
"p35_write_updt_val"
],
"entry16_vld": [
"entry16_vld"
],
"p34_write_updt_val": [
"p34_write_updt_val"
],
"p1... | multi_tool | cross_stage_mapper+static_analyzer | compositional | 5e6a5a7ea7af | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the ct_mmu_iplru module, how well did the RTL signals survive into the netlist mapping, and how does that mapping coverage compare to the module's overall RTL complexity?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"p22_write_updt_val": [
"p22_write_updt_val"
... | a0975103192e | 6fd96d431f86 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/XUANTIE-RV/openc910",
"commit": "b91c90914c19f114d35c8f6b73408eb241ed847c",
"path": "C910_RTL_FACTORY/gen_rtl/mmu/rtl/ct_mmu_iplru.v",
"sha256": "5509b917eee646b4ed4ab057ee0b7dc960175d254ba2a570a4f84b0a9f312f32"
} |
For the module asic_oa32, how does the structure shown in its DFG compare with its code-level complexity, and does the DFG port count match the declared ports? | The DFG for asic_oa32 contains 10 nodes and 12 edges with an average degree of 1.2, comprising 1 $and gate, 3 $or gates, 5 input ports and 1 output port, which matches the static analysis showing 5 inputs and 1 output for a total of 6 ports. The DFG's purely combinational gate-level structure is consistent with the cod... | github_repos/aolofsson_oh/asiclib/hdl/asic_oa32.v | asic_oa32 | graph_extractor+static_analyzer | [
{
"graph_type": "DFG"
},
{
"analysis_type": "full"
}
] | [graph_extractor {"graph_type": "DFG"}]
{
"status": "success",
"graph_type": "DFG",
...[2619 chars elided]...
"node_count": 10,
"edge_count": 12,
"graph_properties": {
"node_types": {
"$and": 1,
"$or": 3,
"port_input": 5,
"port_output": 1
},
"avg_degree": 1.2,
"module_n... | multi_tool | graph_extractor+static_analyzer | compositional | 9a2e3f7d1ce2 | [{"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the module asic_oa32, how does the structure shown in its DFG compare with its code-level complexity, and does the DFG port count match the declared ports?
[graph_extractor {"graph_type": "DFG"}]
{
"status": "success",
"graph_type": "DFG",
...[2619 chars elided]...
"node_count": 10,
"edge_count":... | 13e5daac4ed0 | 701d8e6cc1ca | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "asiclib/hdl/asic_oa32.v",
"sha256": "e5ac01729d6de32a362dd21edd9b0ea0d05a4e0113beff1b3c6a4abb86ba917a"
} |
For asic_xor4, if I apply the aggressive area optimization recipe, how would the current synthesis results likely change, and what trade-offs should I watch for? | The current implementation of asic_xor4 has an area of 6.0, a delay of 111.23, and a power of 0.003 using 3 gates (2 XNOR and 1 XOR), while the area-focused optimization is estimated to improve area by -15.0 and power by -10.0 at the cost of delay increasing by 5.0. The trade-offs noted are that area optimization may i... | github_repos/aolofsson_oh/asiclib/hdl/asic_xor4.v | asic_xor4 | optimization_advisor+synthesis_tool | [
{
"target_metric": "area"
},
{
"optimization_level": "medium"
}
] | [optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommended_recipes": [
"synth -top asic_xor4 -flatten",
"opt -full; share -aggressive; opt",
"abc -g gates -liberty stdcells.lib",
"opt_clean -purge"
],
"optimization_suggestions": [
{
... | multi_tool | optimization_advisor+synthesis_tool | compositional | 3b0ae6abf2c5 | [{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For asic_xor4, if I apply the aggressive area optimization recipe, how would the current synthesis results likely change, and what trade-offs should I watch for?
[optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommended_recipes": [
"synth -top asi... | 1baa0eca5a96 | 700de021b80b | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "asiclib/hdl/asic_xor4.v",
"sha256": "0e9655279207735678000f14db4a90ed78d50fb708fa6a1ac0a9526fc1de4f30"
} |
For mrx_fifo, how well does the RTL-to-netlist signal mapping line up with the structure of the module's AIG, and are the unmapped signals a significant share of the design? | The AIG for mrx_fifo contains 957 nodes and 2858 edges with an average degree of 2.99, including 128 $_DFFE_PP_ flip-flops and 352 $_AND_ gates, while the RTL-to-netlist mapping achieved an alignment score of 89.29 with 25 of 28 RTL signals mapped. Only three signals — emode_active, emode_valid, and emode_access — rema... | github_repos/aolofsson_oh/mio/hdl/mrx_fifo.v | mrx_fifo | cross_stage_mapper+graph_extractor | [
{},
{
"graph_type": "AIG"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"rx_clk": [
"rx_clk"
],
"fifo_data": [
"fifo_data"
],
"clk": [
"clk",
"rx_clk"
],
"datamode": [
"datamode",
"amode_datamode"
],
"emode_shiftreg": [
"emode_shiftreg... | multi_tool | cross_stage_mapper+graph_extractor | compositional | ebf582ab91e0 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}] | Question: For mrx_fifo, how well does the RTL-to-netlist signal mapping line up with the structure of the module's AIG, and are the unmapped signals a significant share of the design?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"rx_clk": [
"rx_clk"
],
"fifo_data": [... | e2711f1acf6e | 705ec5370575 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "mio/hdl/mrx_fifo.v",
"sha256": "fa1ba4aa318bad49ff9ce7f32560262e0c7732d61908708cc7eee830fe8487ba"
} |
For the debounce_switch module, given its power optimization analysis and the static analysis results, what power improvements could be achieved and does the code structure raise any concerns about applying them? | The power optimization flow (including clock gating and operand isolation) is estimated to improve power by -25.0 while trading off area and delay by 5.0 each, with clock gating adding timing complexity. The static analysis shows debounce_switch has 73 lines of code, a cyclomatic complexity of 13, and a nesting depth o... | github_repos/corundum_corundum/fpga/lib/pcie/example/VCU1525/fpga_axi/rtl/debounce_switch.v | debounce_switch | optimization_advisor+static_analyzer | [
{
"target_metric": "power"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "power"}]
{
"status": "success",
"target_metric": "power",
"recommended_recipes": [
"synth -top debounce_switch",
"opt; share; opt",
"abc -g gates -liberty stdcells.lib",
"opt_clean; clockgate"
],
"optimization_suggestions": [
{
"type": "clock_... | multi_tool | optimization_advisor+static_analyzer | compositional | 91051e4a4516 | [{"tool": "optimization_advisor", "parameters": {"target_metric": "power"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the debounce_switch module, given its power optimization analysis and the static analysis results, what power improvements could be achieved and does the code structure raise any concerns about applying them?
[optimization_advisor {"target_metric": "power"}]
{
"status": "success",
"target_metric": "p... | 55b907591c64 | 700f31800e4a | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/pcie/example/VCU1525/fpga_axi/rtl/debounce_switch.v",
"sha256": "02d6ba80136cb9be942347e33c43881f465acbfc4f41b6af3a32d41c86b4ef5a"
} |
For the spimemio module, given its CDFG structure (including the large number of muxes) and the area-focused optimization recommendations, how would you summarize the resource-sharing opportunity, and what are the implications of pursuing it? | The CDFG for spimemio contains 343 nodes and 3108 edges, with 101 $mux and 13 $pmux nodes, which lines up with the suggestion to share multiplexers via muxcover and to share arithmetic operators via share -aggressive given the 4 $sub and 1 $add nodes. The estimated result is a -15.0 area and -10.0 power improvement, bu... | github_repos/YosysHQ_picorv32/picosoc/spimemio.v | spimemio | graph_extractor+optimization_advisor | [
{
"graph_type": "CDFG"
},
{
"target_metric": "area"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[58843 chars elided]...
"node_count": 343,
"edge_count": 3108,
"graph_properties": {
"node_types": {
"$logic_not": 18,
"$logic_or": 4,
"$mux": 101,
"$logic_and": 18,
"$eq": 22,
"$ad... | multi_tool | graph_extractor+optimization_advisor | compositional | 51860755b63f | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}] | Question: For the spimemio module, given its CDFG structure (including the large number of muxes) and the area-focused optimization recommendations, how would you summarize the resource-sharing opportunity, and what are the implications of pursuing it?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
... | bd361d3f11a8 | 70d04db5666a | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/YosysHQ/picorv32",
"commit": "ef203c2b0a3fb793280f5114941416c425c5b461",
"path": "picosoc/spimemio.v",
"sha256": "3bbd69ef9d49ba82d0fb952a8ca68d0360f6ad4b0bb2aa55e5f1ce1744a7188e"
} |
For debounce_switch, the delay-focused optimization suggests pipelining and logic duplication with an estimated delay reduction of 20% at the cost of area and power. Given the current implementation reports a critical path of 219.91, an area of 139.0, and a power of 0.127 over 127 gates and 24 flip-flops, do you think ... | The current debounce_switch implementation already has a large sequential element count (24 $_DFF_PP0_ flip-flops plus 4 $_DFFE_PP0P_ enable flops) relative to 127 total gates, so adding pipelining for an estimated delay improvement of 20.0 would push area and power up further from the current area of 139.0 and power o... | github_repos/corundum_corundum/fpga/lib/pcie/example/VCU1525/fpga_axi/rtl/debounce_switch.v | debounce_switch | optimization_advisor+synthesis_tool | [
{
"target_metric": "delay"
},
{
"optimization_level": "medium"
}
] | [optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metric": "delay",
"recommended_recipes": [
"synth -top debounce_switch",
"opt -fast",
"abc -fast -liberty stdcells.lib",
"opt_clean"
],
"optimization_suggestions": [
{
"type": "pipeline_insertion",
... | multi_tool | optimization_advisor+synthesis_tool | compositional | c30907039dca | [{"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For debounce_switch, the delay-focused optimization suggests pipelining and logic duplication with an estimated delay reduction of 20% at the cost of area and power. Given the current implementation reports a critical path of 219.91, an area of 139.0, and a power of 0.127 over 127 gates and 24 flip-flops, do ... | 1cba4e52c53c | 700f31800e4a | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/pcie/example/VCU1525/fpga_axi/rtl/debounce_switch.v",
"sha256": "02d6ba80136cb9be942347e33c43881f465acbfc4f41b6af3a32d41c86b4ef5a"
} |
For the crc16_dat16 module, how does the structure shown in its CDFG compare with the synthesis results, and what do the delay and power figures indicate about this implementation? | The CDFG of crc16_dat16 contains 35 nodes and 244 edges, dominated by 28 xor6 nodes plus 4 input ports, 2 output ports and 1 crc16_dat16_factor node, with an average degree of 6.97. Synthesis at medium optimization mirrors this structure exactly, producing 29 gates (28 xor6 cells and 1 crc16_dat16_factor instance) with... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/crc/crc16_dat16.v | crc16_dat16 | graph_extractor+synthesis_tool | [
{
"graph_type": "CDFG"
},
{
"optimization_level": "medium"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[23133 chars elided]...
"node_count": 35,
"edge_count": 244,
"graph_properties": {
"node_types": {
"crc16_dat16_factor": 1,
"port_input": 4,
"port_output": 2,
"xor6": 28
},
"avg_degree"... | multi_tool | graph_extractor+synthesis_tool | compositional | 16c5d8697858 | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the crc16_dat16 module, how does the structure shown in its CDFG compare with the synthesis results, and what do the delay and power figures indicate about this implementation?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[23133 chars elided]...
"node_cou... | 45c5daff0b0b | 711ea88f1c0e | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/crc/crc16_dat16.v",
"sha256": "a298ced61c69c2cec5cd16c9eeaeeadbeecf10527c341266e2a87f166c9d4243"
} |
For the ct_l2cache_data_array module, how do the structural characteristics of the design affect the feasibility of the suggested delay optimizations, and what trade-offs should I expect? | The ct_l2cache_data_array module is purely structural with 7 instantiations of ct_spsram memory macros, 0 always blocks, 0 assign statements, and a cyclomatic complexity of 2, so the delay optimization suggestions like pipelining arithmetic operations and register retiming have little logic to work on. The estimated de... | github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/l2c/rtl/ct_l2cache_data_array.v | ct_l2cache_data_array | optimization_advisor+static_analyzer | [
{
"target_metric": "delay"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metric": "delay",
"recommended_recipes": [
"synth -top ct_l2cache_data_array",
"opt -fast",
"abc -fast -liberty stdcells.lib",
"opt_clean"
],
"optimization_suggestions": [
{
"type": "pipeline_insertion",... | multi_tool | optimization_advisor+static_analyzer | compositional | 91d3c158694b | [{"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the ct_l2cache_data_array module, how do the structural characteristics of the design affect the feasibility of the suggested delay optimizations, and what trade-offs should I expect?
[optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metric": "delay",
"recommended_rec... | b683420448bc | 70890164bd3a | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/XUANTIE-RV/openc910",
"commit": "b91c90914c19f114d35c8f6b73408eb241ed847c",
"path": "C910_RTL_FACTORY/gen_rtl/l2c/rtl/ct_l2cache_data_array.v",
"sha256": "d0956001949aa17a1ae968a162559c42325e0ba0f8e009a0d9942dcd0593b022"
} |
For the module oh_csa42, how does its structure on the CDFG compare with what the source-level analysis shows about its composition and complexity? | The CDFG of oh_csa42 has 10 nodes and 10 edges, made up of 2 oh_csa32 submodules, 5 input ports and 3 output ports with an average degree of 1.0, while the source analysis reports 4 inputs and 1 output ports, 3 parameters, 4 assign statements, 55 lines of code, a cyclomatic complexity of 4, a nesting depth of 3, and an... | github_repos/aolofsson_oh/stdlib/rtl/oh_csa42.v | oh_csa42 | graph_extractor+static_analyzer | [
{
"graph_type": "CDFG"
},
{
"analysis_type": "full"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[1178 chars elided]...
"node_count": 10,
"edge_count": 10,
"graph_properties": {
"node_types": {
"oh_csa32": 2,
"port_input": 5,
"port_output": 3
},
"avg_degree": 1.0,
"module_name": "oh_... | multi_tool | graph_extractor+static_analyzer | compositional | 02355a4a8a99 | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the module oh_csa42, how does its structure on the CDFG compare with what the source-level analysis shows about its composition and complexity?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[1178 chars elided]...
"node_count": 10,
"edge_count": 10,
"gr... | cac40fa91235 | 717297473c19 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "stdlib/rtl/oh_csa42.v",
"sha256": "472a36945fcaca576045da2c17ef771f6427882245aa0877d53fff557713ac93"
} |
For the erx_fifo module, given that all RTL signals map cleanly to the netlist and considering the area-focused optimization suggestions, what should I expect in terms of coverage and area/power/delay trade-offs if I apply aggressive resource sharing? | All 15 RTL signals in erx_fifo map to the netlist with a 100.0 alignment score and no unmapped elements, so the starting point is clean. Applying the area optimization recipes, including aggressive sharing of arithmetic operators, is estimated to reduce area by -15.0 and power by -10.0 but increase delay by 5.0, with t... | github_repos/aolofsson_oh/elink/hdl/erx_fifo.v | erx_fifo | cross_stage_mapper+optimization_advisor | [
{},
{
"target_metric": "area"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"rxwr_access": [
"rxwr_access"
],
"rxrd_wait": [
"rxrd_wait"
],
"rxrd_access": [
"rxrd_access"
],
"rxrd_fifo_access": [
"rxrd_fifo_access"
],
"sys_clk": [
"sys_clk"
],
... | multi_tool | cross_stage_mapper+optimization_advisor | compositional | 9e8617771354 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}] | Question: For the erx_fifo module, given that all RTL signals map cleanly to the netlist and considering the area-focused optimization suggestions, what should I expect in terms of coverage and area/power/delay trade-offs if I apply aggressive resource sharing?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_t... | 4d446b8cf8ae | 715d08fb6771 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "elink/hdl/erx_fifo.v",
"sha256": "27384a7ec58d534f785c87927d2d0fccf19f238e3b1030b021f95ff262b2a19e"
} |
For the axi_ad7768 module, how large is the And-Inverter Graph (AIG) representation, and given that I want to reduce area, what optimization approach is recommended and what delay penalty should I expect? | The AIG for axi_ad7768 contains 1189 nodes and 5170 edges, with 34 $_DFF_PN0_ flip-flops and 8 up_adc_channel instances. To reduce area, the recommended flow uses aggressive resource sharing (share -aggressive) along with opt -full and gate mapping, estimated to improve area by -15.0 and power by -10.0, but at a delay ... | github_repos/analogdevicesinc_hdl/library/axi_ad7768/axi_ad7768.v | axi_ad7768 | graph_extractor+optimization_advisor | [
{
"graph_type": "AIG"
},
{
"target_metric": "area"
}
] | [graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_type": "AIG",
...[33557 chars elided]...
"node_count": 1189,
"edge_count": 5170,
"graph_properties": {
"node_types": {
"$_AND_": 272,
"$_NOT_": 816,
"$_DFF_PN0_": 34,
"up_adc_channel": 8,
"axi_ad7768_if": 1... | multi_tool | graph_extractor+optimization_advisor | compositional | 7056b04af1d5 | [{"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}] | Question: For the axi_ad7768 module, how large is the And-Inverter Graph (AIG) representation, and given that I want to reduce area, what optimization approach is recommended and what delay penalty should I expect?
[graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_type": "AIG",
...[33557 chars ... | 9f3987b24b82 | 71d6bcf68260 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/axi_ad7768/axi_ad7768.v",
"sha256": "1e0a35332c592a0b9bb72dfae595086c2bde2eb64da9869413d55ec11b44b8cc"
} |
For the axi_ad9783 module, how does its structural complexity compare to its post-synthesis characteristics, considering the code statistics and the area, delay, and power results from delay/power optimization? | axi_ad9783 is structurally simple — 158 lines of code, 22 total ports (10 inputs and 12 outputs), 8 wires, 0 always blocks, 3 assign statements, and a cyclomatic complexity of 1 with nesting depth 0 — which matches its synthesis result of only 3 gates (one each of axi_ad9783_core, axi_ad9783_if, and up_axi) across 55 w... | github_repos/analogdevicesinc_hdl/library/axi_ad9783/axi_ad9783.v | axi_ad9783 | static_analyzer+synthesis_tool | [
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "axi_ad9783",
"port_count": {
"inputs": 10,
"outputs": 12,
"inouts": 0,
"total": 22
},
"signal_count": {
"wires": 8,
"regs": 0,
"parameters": 9,
"total": 8
},
"always_blocks": 0,
"assign_sta... | multi_tool | static_analyzer+synthesis_tool | compositional | 60457c9ddb7a | [{"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the axi_ad9783 module, how does its structural complexity compare to its post-synthesis characteristics, considering the code statistics and the area, delay, and power results from delay/power optimization?
[static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "axi_ad9783"... | 3c84b934cd6f | 7228bea208b9 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/axi_ad9783/axi_ad9783.v",
"sha256": "893ce8c7ae6080172ff2f1206f50439b0a3e1a056618c854d3404f2e4d0a0e44"
} |
For the tern_node module, how well did the RTL signals survive into the synthesized netlist, and considering the module's complexity and synthesis results, does the netlist size look reasonable? Please mention the number of RTL signals mapped, the module's code complexity, and the resulting gate count, area, and delay. | Only 1 of 2 RTL signals was successfully mapped (clk), leaving 'layer' unmapped for an alignment score of 50.0, even though tern_node is a small module with 27 lines of code, cyclomatic complexity 3, and 2 parameters. Synthesis produced a netlist of 87 gates (28 NAND, 22 XOR, 11 AND, 10 DFF, 8 OR, 8 XNOR) with area 147... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/arithmetic/ternary_sum_nine.v | tern_node | cross_stage_mapper+static_analyzer+synthesis_tool | [
{},
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"clk": [
"clk"
],
"layer": []
},
"alignment_score": 50.0,
"unmapped_elements": [
"layer"
],
"mapping_statistics": {
"rtl_signals": 2,
"netlist_wires": 242,
"netlist_cells": 0,
"mapped_signals":... | multi_tool | cross_stage_mapper+static_analyzer+synthesis_tool | compositional | 03cda2e0df72 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the tern_node module, how well did the RTL signals survive into the synthesized netlist, and considering the module's complexity and synthesis results, does the netlist size look reasonable? Please mention the number of RTL signals mapped, the module's code complexity, and the resulting gate count, area, ... | b96799d8c0ca | 72430b3543e8 | train | glm-5.3 | 3 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/arithmetic/ternary_sum_nine.v",
"sha256": "2931ecca305839f2199ca1700423c2a62240c5c00045a4985510376ebfcd5da9"
} |
For the tern_node module, how does its structural complexity from the DFG compare with its RTL characteristics and its post-optimization cost, and does anything look inconsistent in the flip-flop counts? | The tern_node DFG has 8 nodes and 75 edges with an average degree of 9.38, including 2 $add nodes and 1 $dff, while the RTL has 27 lines of code, cyclomatic complexity 3, and 2 parameters, and synthesis at medium optimization gives 87 gates, 147.0 area, 262.01 delay, and 0.087 power. A notable inconsistency is that the... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/arithmetic/ternary_sum_nine.v | tern_node | graph_extractor+static_analyzer+synthesis_tool | [
{
"graph_type": "DFG"
},
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [graph_extractor {"graph_type": "DFG"}]
{
"status": "success",
"graph_type": "DFG",
...[8655 chars elided]...
"node_count": 8,
"edge_count": 75,
"graph_properties": {
"node_types": {
"$add": 2,
"$dff": 1,
"port_input": 4,
"port_output": 1
},
"avg_degree": 9.38,
"module_... | multi_tool | graph_extractor+static_analyzer+synthesis_tool | compositional | b775ccdf53f9 | [{"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the tern_node module, how does its structural complexity from the DFG compare with its RTL characteristics and its post-optimization cost, and does anything look inconsistent in the flip-flop counts?
[graph_extractor {"graph_type": "DFG"}]
{
"status": "success",
"graph_type": "DFG",
...[8655 chars el... | a3eb0cc82370 | 72430b3543e8 | train | glm-5.3 | 3 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/arithmetic/ternary_sum_nine.v",
"sha256": "2931ecca305839f2199ca1700423c2a62240c5c00045a4985510376ebfcd5da9"
} |
For the util_bsplit module, how does its simple one-input, eight-output structure seen in the AIG relate to the netlist mapping, and is the suggested delay-optimization flow worth applying given the estimated improvements? | The AIG for util_bsplit is purely structural: 9 nodes (1 port_input and 8 port_outputs) with 0 edges and avg_degree 0.0, meaning it is just a bit split with no logic, which matches the mapping result of 0 mapped signals and 0 netlist cells across 10 netlist_wires. Since there is no logic to optimize, the delay-targeted... | github_repos/analogdevicesinc_hdl/library/util_bsplit/util_bsplit.v | util_bsplit | cross_stage_mapper+graph_extractor+optimization_advisor | [
{},
{
"graph_type": "AIG"
},
{
"target_metric": "delay"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {},
"alignment_score": 0.0,
"unmapped_elements": [],
"mapping_statistics": {
"rtl_signals": 0,
"netlist_wires": 10,
"netlist_cells": 0,
"mapped_signals": 0,
"unmapped_signals": 0
},
"error": null
}
[graph_extract... | multi_tool | cross_stage_mapper+graph_extractor+optimization_advisor | compositional | 095bc292b9df | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}] | Question: For the util_bsplit module, how does its simple one-input, eight-output structure seen in the AIG relate to the netlist mapping, and is the suggested delay-optimization flow worth applying given the estimated improvements?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {},
"al... | cca03e115527 | 7267bc8c90e4 | train | glm-5.3 | 3 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/util_bsplit/util_bsplit.v",
"sha256": "42f05ab7448334f32b5c9b4bd3f85da2033e59f618b091da73b81a8561b9c61b"
} |
For the compress_32 module, how do the structural complexity results relate to the delay-optimized synthesis results, and is the delay figure consistent with the critical path estimate? | compress_32 is a small but operator-heavy module: only 2 assign statements and 13 lines of code, but 135 operators and cyclomatic complexity 3, which map to 96 gates (64 NAND, 16 OR, 16 XNOR) and area 112.0 at medium optimization. The reported delay of 190.08 matches the critical path estimate of 190.08, with power at ... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/arithmetic/compress_32.v | compress_32 | static_analyzer+synthesis_tool | [
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "compress_32",
"port_count": {
"inputs": 0,
"outputs": 0,
"inouts": 0,
"total": 0
},
"signal_count": {
"wires": 0,
"regs": 0,
"parameters": 1,
"total": 0
},
"always_blocks": 0,
"assign_state... | multi_tool | static_analyzer+synthesis_tool | compositional | 0b1dfb1791ad | [{"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the compress_32 module, how do the structural complexity results relate to the delay-optimized synthesis results, and is the delay figure consistent with the critical path estimate?
[static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "compress_32",
"port_count": {
... | 863a2b2f69a1 | 7277d71f4e99 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/arithmetic/compress_32.v",
"sha256": "ae4a803ad00df1bedde691403fd7ba4df9dc0f1c1c4cec80aca5b4120ea08770"
} |
For the ad_pack module, how does its structural complexity after mapping to an And-Inverter Graph (AIG) compare with its RTL-level complexity, and does either view suggest any concern? | At the RTL level ad_pack has 7 inputs and 6 outputs (13 total ports), 9 always blocks, 4 assign statements, and a cyclomatic complexity of 22 across 120 lines of code. After mapping to an AIG it expands to 936 nodes and 2409 edges, including 347 AND nodes, 462 NOT nodes, and 48 positive-edge D flip-flops, with an avera... | github_repos/analogdevicesinc_hdl/library/common/ad_pack.v | ad_pack | graph_extractor+static_analyzer | [
{
"graph_type": "AIG"
},
{
"analysis_type": "full"
}
] | [graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_type": "AIG",
...[33464 chars elided]...
"node_count": 936,
"edge_count": 2409,
"graph_properties": {
"node_types": {
"$_AND_": 347,
"$_NOT_": 462,
"$_DFF_P_": 48,
"$_SDFFE_PP0P_": 8,
"$_DFFE_PP_": 64,
... | multi_tool | graph_extractor+static_analyzer | compositional | a5cb5ef12582 | [{"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the ad_pack module, how does its structural complexity after mapping to an And-Inverter Graph (AIG) compare with its RTL-level complexity, and does either view suggest any concern?
[graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_type": "AIG",
...[33464 chars elided]...
"node_c... | cf6bfcd0225b | 73406d6f75d3 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/common/ad_pack.v",
"sha256": "239b88c27d6dfda05aa1eb8a7d6befa2f97510437b62ce8a79ba95f09b21a059"
} |
For the oh_oddr module, the RTL-to-netlist mapping shows most signals failed to map, the delay-focused optimization advisor gives estimates, and synthesis reports actual figures. Briefly compare them: how good was the signal mapping, what delay improvement does the optimization advisor estimate and at what cost, and ho... | For oh_oddr, only 1 of 4 RTL signals mapped (3 unmapped, alignment score 25.0) against 10 netlist wires and 0 netlist cells in the mapping analysis. The delay optimization advisor estimates a delay improvement of -20.0 but with an area increase of 10.0 and power increase of 5.0, warning that speed optimization increase... | github_repos/aolofsson_oh/stdlib/rtl/oh_oddr.v | oh_oddr | cross_stage_mapper+optimization_advisor+synthesis_tool | [
{},
{
"target_metric": "delay"
},
{
"optimization_level": "medium"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"input": [],
"clk": [
"clk"
],
"output": [],
"buffer": []
},
"alignment_score": 25.0,
"unmapped_elements": [
"input",
"output",
"buffer"
],
"mapping_statistics": {
"rtl_signals": 4,
"ne... | multi_tool | cross_stage_mapper+optimization_advisor+synthesis_tool | compositional | 29b153bbde88 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the oh_oddr module, the RTL-to-netlist mapping shows most signals failed to map, the delay-focused optimization advisor gives estimates, and synthesis reports actual figures. Briefly compare them: how good was the signal mapping, what delay improvement does the optimization advisor estimate and at what co... | ce575fe30f6c | 7325d5eb19a3 | train | glm-5.3 | 3 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "stdlib/rtl/oh_oddr.v",
"sha256": "1f9f2a7ad82c4d1c2a6a0706b140c414db3bef423518c209cb6a4c3954fa9b58"
} |
For the up_clkgen module, how aggressive is the area optimization likely to be given the complexity of the code, and what trade-off should I expect in timing? | The up_clkgen module is fairly complex, with 124 lines of code, cyclomatic complexity 18, nesting depth 17, and 571 operators, so the recommended area recipes (such as aggressive resource sharing and mux optimization) would matter a lot for squeezing it down. The estimated improvement is -15.0 in area and -10.0 in powe... | github_repos/analogdevicesinc_hdl/library/common/up_clkgen.v | up_clkgen | optimization_advisor+static_analyzer | [
{
"target_metric": "area"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommended_recipes": [
"synth -top up_clkgen -flatten",
"opt -full; share -aggressive; opt",
"abc -g gates -liberty stdcells.lib",
"opt_clean -purge"
],
"optimization_suggestions": [
{
... | multi_tool | optimization_advisor+static_analyzer | compositional | 30e8bb543620 | [{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the up_clkgen module, how aggressive is the area optimization likely to be given the complexity of the code, and what trade-off should I expect in timing?
[optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommended_recipes": [
"synth -top up_clk... | d1e52e9e48f3 | 7354996cd8e4 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/common/up_clkgen.v",
"sha256": "9d829119716982962de359d172ab118ae0195f40b32a2f0fbd035aa1f97fd715"
} |
For altera_avalon_st_pipeline_base, how well did the RTL signals survive into the netlist, and does the DFG structure help explain the two signals that were not mapped? | The RTL-to-netlist mapping matched 6 of 8 signals (alignment score 75.0), with full0 and full1 left unmapped, while the netlist has 85 wires and 0 cells. The DFG for altera_avalon_st_pipeline_base has 33 nodes and 133 edges with an average degree of 4.03, including 3 $adff and 1 $adffe flip-flops, which correspond to t... | github_repos/pConst_basic_verilog/example_projects/quartus_test_prj_template_v4/ip/jtag_io/synthesis/submodules/altera_avalon_st_pipeline_base.v | altera_avalon_st_pipeline_base | cross_stage_mapper+graph_extractor | [
{},
{
"graph_type": "DFG"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"full0": [],
"full1": [],
"clk": [
"clk"
],
"in_ready": [
"in_ready"
],
"in_valid": [
"in_valid"
],
"out_ready": [
"out_ready"
],
"out_valid": [
"out_valid"
],
... | multi_tool | cross_stage_mapper+graph_extractor | compositional | b8d21e4c5429 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}] | Question: For altera_avalon_st_pipeline_base, how well did the RTL signals survive into the netlist, and does the DFG structure help explain the two signals that were not mapped?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"full0": [],
"full1": [],
"clk": [
"clk"
... | 439e8e21a231 | 742b3f2445f5 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "example_projects/quartus_test_prj_template_v4/ip/jtag_io/synthesis/submodules/altera_avalon_st_pipeline_base.v",
"sha256": "e2e5bc9b27c2d25a0e37343cef349dc82c44f4f6ff8aaf332303e8f4b2760dd5"
... |
For the module ct_spsram_65536x128, can you summarize the port-to-implementation correspondence and the structure of its data flow graph, and confirm whether the write-enable signals appear as separate inputs in that DFG? | The RTL-to-netlist mapping for ct_spsram_65536x128 is fully aligned with a score of 100.0, mapping all 6 RTL signals (D, WEN, Q, GWEN, CEN and CLK) with 0 unmapped, and WEN additionally maps to the netlist wire GWEN. The DFG has 8 nodes and 403 edges with an average degree of 50.38, consisting of 6 port_input nodes (in... | github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/l2c/rtl/ct_spsram_65536x128.v | ct_spsram_65536x128 | cross_stage_mapper+graph_extractor | [
{},
{
"graph_type": "DFG"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"D": [
"D"
],
"WEN": [
"WEN",
"GWEN"
],
"Q": [
"Q"
],
"GWEN": [
"GWEN"
],
"CEN": [
"CEN"
],
"CLK": [
"CLK"
]
},
"alignment_score": 100.0,
"unmapp... | multi_tool | cross_stage_mapper+graph_extractor | compositional | 01bf5759b88d | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}] | Question: For the module ct_spsram_65536x128, can you summarize the port-to-implementation correspondence and the structure of its data flow graph, and confirm whether the write-enable signals appear as separate inputs in that DFG?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"D":... | af25cf4ccd56 | 740ad0604874 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/XUANTIE-RV/openc910",
"commit": "b91c90914c19f114d35c8f6b73408eb241ed847c",
"path": "C910_RTL_FACTORY/gen_rtl/l2c/rtl/ct_spsram_65536x128.v",
"sha256": "34caea81911444ebf41a42383c8f4178a0b3cc43f443c206f33bb88dd88d276f"
} |
For the fpga_core module, how do the CDFG structure and the current synthesis results compare, and would applying the suggested power-oriented optimizations (clock gating and operand isolation) be worthwhile given the timing trade-offs? | The CDFG of fpga_core contains 66 nodes and 2119 edges with an average degree of 32.11, dominated by 36 input ports and 29 output ports around a single example_core_pcie_us instance, while synthesis at the medium optimization level reports an area of 1.0, a delay and critical path estimate of 50.0, a power of 0.001, an... | github_repos/corundum_corundum/fpga/lib/pcie/example/ExaNIC_X25/fpga/rtl/fpga_core.v | fpga_core | graph_extractor+optimization_advisor+synthesis_tool | [
{
"graph_type": "CDFG"
},
{
"target_metric": "power"
},
{
"optimization_level": "medium"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[59987 chars elided]...
"node_count": 66,
"edge_count": 2119,
"graph_properties": {
"node_types": {
"example_core_pcie_us": 1,
"port_input": 36,
"port_output": 29
},
"avg_degree": 32.11,
... | multi_tool | graph_extractor+optimization_advisor+synthesis_tool | compositional | 4c3a67107557 | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "power"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the fpga_core module, how do the CDFG structure and the current synthesis results compare, and would applying the suggested power-oriented optimizations (clock gating and operand isolation) be worthwhile given the timing trade-offs?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"gra... | 3d84a9b00299 | 743992f525e1 | train | glm-5.3 | 3 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/pcie/example/ExaNIC_X25/fpga/rtl/fpga_core.v",
"sha256": "67752a9898638dd8803c21948b1296ef2f8e1a7383fd7ace296df4f078c611ae"
} |
For fpga_core, how well do the RTL and netlist representations line up, and how does that compare to the module's structure shown in its CDFG? | The RTL-to-netlist mapping for fpga_core achieved an alignment score of 98.08, mapping 51 of 52 RTL signals with only 'wire' unmapped, while the netlist contains 65 wires. The CDFG for the same module has 66 nodes and 2119 edges with an average degree of 32.11, consisting of one example_core_pcie_us instance plus 36 in... | github_repos/corundum_corundum/fpga/lib/pcie/example/ExaNIC_X25/fpga/rtl/fpga_core.v | fpga_core | cross_stage_mapper+graph_extractor | [
{},
{
"graph_type": "CDFG"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"cfg_max_read_req": [
"cfg_max_read_req"
],
"rst": [
"rst"
],
"wire": [],
"m_axis_rq_tvalid": [
"m_axis_rq_tvalid"
],
"status_error_cor": [
"status_error_cor"
],
"s_axis_cq_trea... | multi_tool | cross_stage_mapper+graph_extractor | compositional | 4e4d2fda70b3 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}] | Question: For fpga_core, how well do the RTL and netlist representations line up, and how does that compare to the module's structure shown in its CDFG?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"cfg_max_read_req": [
"cfg_max_read_req"
],
"rst": [
"rst"
... | 7448c64a08f4 | 743992f525e1 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/pcie/example/ExaNIC_X25/fpga/rtl/fpga_core.v",
"sha256": "67752a9898638dd8803c21948b1296ef2f8e1a7383fd7ace296df4f078c611ae"
} |
For ad_sysref_gen, how well does the RTL-to-netlist signal mapping agree with the module's CDFG structure, considering the number of ports and flip-flops in the graph and the mapped versus unmapped signals? | The CDFG of ad_sysref_gen contains 13 nodes and 112 edges, including 3 $dff, 1 $sdffe and 1 $sdff flip-flop nodes plus 2 port_input and 1 port_output nodes. However, the RTL-to-netlist mapping only matched 2 of 7 RTL signals (core_clk and sysref_en), leaving 5 unmapped (reg, sysref_out, sysref_en_m1, sysref_en_int, sys... | github_repos/analogdevicesinc_hdl/library/common/ad_sysref_gen.v | ad_sysref_gen | cross_stage_mapper+graph_extractor | [
{},
{
"graph_type": "CDFG"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"reg": [],
"sysref_out": [],
"sysref_en_m1": [],
"sysref_en_int": [],
"sysref_en_m2": [],
"core_clk": [
"core_clk"
],
"sysref_en": [
"sysref_en"
]
},
"alignment_score": 28.57,
"unmapped_e... | multi_tool | cross_stage_mapper+graph_extractor | compositional | 80d78f33287f | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}] | Question: For ad_sysref_gen, how well does the RTL-to-netlist signal mapping agree with the module's CDFG structure, considering the number of ports and flip-flops in the graph and the mapped versus unmapped signals?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"reg": [],
"sys... | 95a4cda071da | 74824ca16c82 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/common/ad_sysref_gen.v",
"sha256": "3c2f0140d313f4c8709d57abd26a6de83c6e100d5e352ce9bf153a0b07ee1443"
} |
For eth_xcvr_phy_quad_wrapper, if I apply the delay-focused optimization flow with its suggested retiming and fanout-reduction techniques, how much delay improvement and area penalty are expected, and does the module's current structure support that kind of optimization given its register and always-block usage? | The delay optimization is estimated to improve delay by -20.0 at the cost of a 10.0 area increase and 5.0 power increase, with suggestions to pipeline arithmetic operations via register retiming and duplicate logic to reduce fanout. However, eth_xcvr_phy_quad_wrapper contains 0 regs and 0 always blocks across its 322 l... | github_repos/corundum_corundum/fpga/lib/eth/example/Arista_7132LB/fpga_25g/rtl/eth_xcvr_phy_quad_wrapper.v | eth_xcvr_phy_quad_wrapper | optimization_advisor+static_analyzer | [
{
"target_metric": "delay"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metric": "delay",
"recommended_recipes": [
"synth -top eth_xcvr_phy_quad_wrapper",
"opt -fast",
"abc -fast -liberty stdcells.lib",
"opt_clean"
],
"optimization_suggestions": [
{
"type": "pipeline_inserti... | multi_tool | optimization_advisor+static_analyzer | compositional | da3166795510 | [{"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For eth_xcvr_phy_quad_wrapper, if I apply the delay-focused optimization flow with its suggested retiming and fanout-reduction techniques, how much delay improvement and area penalty are expected, and does the module's current structure support that kind of optimization given its register and always-block usa... | 1931e837c678 | 7472e6629cd7 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/eth/example/Arista_7132LB/fpga_25g/rtl/eth_xcvr_phy_quad_wrapper.v",
"sha256": "0d6dce07b6a8fe51a55c4e9cb9100bbc0e307c0f56f77475a3e9d7a7e4c93b22"
} |
For the ad_sysref_gen module, how does the code complexity compare with the size and timing of the synthesized hardware — specifically, relate the RTL statistics (lines of code, cyclomatic complexity, register count) to the gate count, critical path delay, and power after medium-level optimization? | The ad_sysref_gen module has 34 lines of code with a cyclomatic complexity of 8 and 4 regs, and it synthesizes to 59 gates with a critical path delay of 179.13 and power of 0.059. Its relatively high cyclomatic complexity of 8 and 3 always blocks map to a mostly sequential netlist dominated by 8 $_SDFF_PN0_ flip-flops ... | github_repos/analogdevicesinc_hdl/library/common/ad_sysref_gen.v | ad_sysref_gen | static_analyzer+synthesis_tool | [
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "ad_sysref_gen",
"port_count": {
"inputs": 2,
"outputs": 1,
"inouts": 0,
"total": 3
},
"signal_count": {
"wires": 0,
"regs": 4,
"parameters": 2,
"total": 4
},
"always_blocks": 3,
"assign_sta... | multi_tool | static_analyzer+synthesis_tool | compositional | 1fc7229a950e | [{"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the ad_sysref_gen module, how does the code complexity compare with the size and timing of the synthesized hardware — specifically, relate the RTL statistics (lines of code, cyclomatic complexity, register count) to the gate count, critical path delay, and power after medium-level optimization?
[static_a... | 4367708f19dc | 74824ca16c82 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/common/ad_sysref_gen.v",
"sha256": "3c2f0140d313f4c8709d57abd26a6de83c6e100d5e352ce9bf153a0b07ee1443"
} |
For system_top, given its CDFG structure and the area-focused optimization recommendations, is the area savings worth it when you consider how connected the design is? | The CDFG for system_top has 61 nodes and 298 edges with an average degree of 4.89, so the design is fairly connectivity-heavy, meaning the aggressive resource sharing suggested for area could indeed increase routing complexity. The area optimization is estimated to improve area by -15.0 and power by -10.0, but at the c... | github_repos/analogdevicesinc_hdl/projects/ad719x_asdz/de10nano/system_top.v | system_top | graph_extractor+optimization_advisor | [
{
"graph_type": "CDFG"
},
{
"target_metric": "area"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[28850 chars elided]...
"node_count": 61,
"edge_count": 298,
"graph_properties": {
"node_types": {
"system_bd": 1,
"ALT_IOBUF": 4,
"port_input": 12,
"port_output": 32,
"port_inout": 12
... | multi_tool | graph_extractor+optimization_advisor | compositional | f273c6b89df9 | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}] | Question: For system_top, given its CDFG structure and the area-focused optimization recommendations, is the area savings worth it when you consider how connected the design is?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[28850 chars elided]...
"node_count": 61,
"e... | da854d1cad67 | 748884dc6be8 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "projects/ad719x_asdz/de10nano/system_top.v",
"sha256": "7e34788b1dcb67e88dda786458776e60a85bb62f19c0a42435a10df605db7501"
} |
For eth_xcvr_phy_wrapper, if I apply the area-focused optimization flow, what impact would it have on the current synthesis results, and is it worthwhile given the module's structure? | The current synthesis of eth_xcvr_phy_wrapper reports an area of 5.0 with 6 cells (2 $_NOT_, 1 eth_phy_10g, 1 eth_xcvr_gt_full, 2 sync_reset), 46 wires, and a critical path delay of 68.47 with 0.006 power. The area optimization estimates an area improvement of -15.0 and power improvement of -10.0, but a delay penalty o... | github_repos/corundum_corundum/fpga/lib/eth/example/ExaNIC_X25/fpga_25g/rtl/eth_xcvr_phy_wrapper.v | eth_xcvr_phy_wrapper | optimization_advisor+synthesis_tool | [
{
"target_metric": "area"
},
{
"optimization_level": "medium"
}
] | [optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommended_recipes": [
"synth -top eth_xcvr_phy_wrapper -flatten",
"opt -full; share -aggressive; opt",
"abc -g gates -liberty stdcells.lib",
"opt_clean -purge"
],
"optimization_suggestions": [
... | multi_tool | optimization_advisor+synthesis_tool | compositional | 0bbfec509434 | [{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For eth_xcvr_phy_wrapper, if I apply the area-focused optimization flow, what impact would it have on the current synthesis results, and is it worthwhile given the module's structure?
[optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommended_recipes":... | 9a27a93ce96f | 7494f10e1ca4 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/eth/example/ExaNIC_X25/fpga_25g/rtl/eth_xcvr_phy_wrapper.v",
"sha256": "8dd5f7389723ae404ac04e7a5e8feca9c444800d56e4a8b3edef03d0f0439a43"
} |
For core_top, how do the synthesized results (area, delay, power) and cell/wire counts relate to the module's structural profile (ports, signals, always blocks, assigns), and given the estimated effects of the area-focused optimization, is pursuing that flow worthwhile? | core_top currently synthesizes to 12.5 area, 103.62 delay, and 0.012 power with 12 gates and 188 wires, matching a large combinational structure of 126 assign statements and only 2 always blocks across 65 ports and 148 signals. The area optimization flow (including mux sharing and aggressive resource sharing) is estima... | github_repos/XUANTIE-RV_wujian100_open/soc/core_top.v | core_top | optimization_advisor+static_analyzer+synthesis_tool | [
{
"target_metric": "area"
},
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommended_recipes": [
"synth -top core_top -flatten",
"opt -full; share -aggressive; opt",
"abc -g gates -liberty stdcells.lib",
"opt_clean -purge"
],
"optimization_suggestions": [
{
"... | multi_tool | optimization_advisor+static_analyzer+synthesis_tool | compositional | 05c0e6fd6226 | [{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For core_top, how do the synthesized results (area, delay, power) and cell/wire counts relate to the module's structural profile (ports, signals, always blocks, assigns), and given the estimated effects of the area-focused optimization, is pursuing that flow worthwhile?
[optimization_advisor {"target_metric"... | 223ed770925a | 747c0030d35a | train | glm-5.3 | 3 | 3,300 | {
"repository": "https://github.com/XUANTIE-RV/wujian100_open",
"commit": "83e297583bb3454b688f9f27d6bc20ff3276ad32",
"path": "soc/core_top.v",
"sha256": "52d6e3b95e3fa7f7e6912e90139911bf3ba288628864beb467339c36114563f0"
} |
For the axi_dma_rd module, how do its CDFG structure, the area-focused optimization estimates, and the static analysis complexity metrics relate — is aggressive area optimization a reasonable decision given the design's size and complexity? | The axi_dma_rd CDFG contains 223 muxes, 20 pmuxes, 153 dffe nodes, and 81 and-gates with an average node degree of 18.58, which supports the suggested mux sharing and aggressive resource sharing aimed at an estimated area improvement of -15.0 and power improvement of -10.0, though delay would rise by 5.0. The static an... | github_repos/corundum_corundum/fpga/lib/axi/rtl/axi_dma_rd.v | axi_dma_rd | graph_extractor+optimization_advisor+static_analyzer | [
{
"graph_type": "CDFG"
},
{
"target_metric": "area"
},
{
"analysis_type": "full"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[61324 chars elided]...
"graph_properties": {
"node_types": {
"$logic_and": 14,
"$logic_not": 11,
"$sub": 9,
"$le": 1,
"$add": 5,
"$logic_or": 4,
"$reduce_bool": 3,
"$gt": 4,... | multi_tool | graph_extractor+optimization_advisor+static_analyzer | compositional | ac87527087af | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the axi_dma_rd module, how do its CDFG structure, the area-focused optimization estimates, and the static analysis complexity metrics relate — is aggressive area optimization a reasonable decision given the design's size and complexity?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
... | 6f67404c65db | 7483a734155f | train | glm-5.3 | 3 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/axi/rtl/axi_dma_rd.v",
"sha256": "853ff3aedc44ec0c12ef3ae8b84d7559800d372f76832c7c133ed5eecac61dd8"
} |
For the eth_axis_rx module, how large is the dataflow graph and what area-optimization opportunity does it suggest, considering the mux-heavy structure shown in the DFG? | The DFG of eth_axis_rx has 139 nodes and 883 edges, including 37 $mux nodes, which motivates the suggested mux optimization via muxcover to share multiplexers, with an estimated area improvement of -15.0 and a delay penalty of 5.0. The trade-off is that area optimization may increase delay and aggressive sharing increa... | github_repos/alexforencich_verilog-ethernet/rtl/eth_axis_rx.v | eth_axis_rx | graph_extractor+optimization_advisor | [
{
"graph_type": "DFG"
},
{
"target_metric": "area"
}
] | [graph_extractor {"graph_type": "DFG"}]
{
"status": "success",
"graph_type": "DFG",
...[56938 chars elided]...
"node_count": 139,
"edge_count": 883,
"graph_properties": {
"node_types": {
"$logic_and": 4,
"$logic_not": 5,
"$logic_or": 4,
"$add": 1,
"$eq": 13,
"$reduce_bo... | multi_tool | graph_extractor+optimization_advisor | compositional | f732d6c71e37 | [{"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}] | Question: For the eth_axis_rx module, how large is the dataflow graph and what area-optimization opportunity does it suggest, considering the mux-heavy structure shown in the DFG?
[graph_extractor {"graph_type": "DFG"}]
{
"status": "success",
"graph_type": "DFG",
...[56938 chars elided]...
"node_count": 139,
"... | 561d433baec6 | 74c4317fe59f | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/alexforencich/verilog-ethernet",
"commit": "77320a9471d19c7dd383914bc049e02d9f4f1ffb",
"path": "rtl/eth_axis_rx.v",
"sha256": "4fb3ab7e0ccafdc85a46f37e533b7fb6e74a7101cfc18757126175ed01354d59"
} |
For the eth_axis_rx module, how do the current synthesis results compare with what area-focused optimization would achieve, and do the code characteristics suggest any risk in applying it? | eth_axis_rx currently synthesizes to 936.0 area, 517.62 delay, 0.354 power, and 354 gates, while aggressive area optimization is estimated to reduce area by -15.0 and power by -10.0 at the cost of a 5.0 delay increase. The module's high complexity (cyclomatic complexity 32, nesting depth 30, 400 operators across 313 li... | github_repos/alexforencich_verilog-ethernet/rtl/eth_axis_rx.v | eth_axis_rx | optimization_advisor+static_analyzer+synthesis_tool | [
{
"target_metric": "area"
},
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommended_recipes": [
"synth -top eth_axis_rx -flatten",
"opt -full; share -aggressive; opt",
"abc -g gates -liberty stdcells.lib",
"opt_clean -purge"
],
"optimization_suggestions": [
{
... | multi_tool | optimization_advisor+static_analyzer+synthesis_tool | compositional | 0d0d890872f5 | [{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the eth_axis_rx module, how do the current synthesis results compare with what area-focused optimization would achieve, and do the code characteristics suggest any risk in applying it?
[optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommended_reci... | 62ce404a5152 | 74c4317fe59f | train | glm-5.3 | 3 | 3,300 | {
"repository": "https://github.com/alexforencich/verilog-ethernet",
"commit": "77320a9471d19c7dd383914bc049e02d9f4f1ffb",
"path": "rtl/eth_axis_rx.v",
"sha256": "4fb3ab7e0ccafdc85a46f37e533b7fb6e74a7101cfc18757126175ed01354d59"
} |
For the system_top module, the area-focused optimization is expected to shrink area and power but at some cost elsewhere — can you summarize how the RTL-to-netlist signal mapping, the estimated area-optimization trade-offs, and the module's static structure (ports, complexity) fit together, and would you be comfortable... | The RTL-to-netlist mapping is perfect, with all 48 RTL signals mapped (alignment score 100.0) to 67 netlist wires, so applying the area recipes (including share -aggressive) is low-risk from a connectivity standpoint. The optimization is estimated to reduce area by -15.0 and power by -10.0 while increasing delay by 5.0... | github_repos/analogdevicesinc_hdl/projects/ad719x_asdz/de10nano/system_top.v | system_top | cross_stage_mapper+optimization_advisor+static_analyzer | [
{},
{
"target_metric": "area"
},
{
"analysis_type": "full"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"ddr3_cas_n": [
"ddr3_cas_n"
],
"eth1_mdc": [
"eth1_mdc"
],
"ddr3_a": [
"ddr3_a"
],
"usb1_nxt": [
"usb1_nxt"
],
"sdio_clk": [
"sdio_clk"
],
"i2c0_sda": [
...[1666 ... | multi_tool | cross_stage_mapper+optimization_advisor+static_analyzer | compositional | c83bb1d5880a | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the system_top module, the area-focused optimization is expected to shrink area and power but at some cost elsewhere — can you summarize how the RTL-to-netlist signal mapping, the estimated area-optimization trade-offs, and the module's static structure (ports, complexity) fit together, and would you be c... | 003e1f78809c | 748884dc6be8 | train | glm-5.3 | 3 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "projects/ad719x_asdz/de10nano/system_top.v",
"sha256": "7e34788b1dcb67e88dda786458776e60a85bb62f19c0a42435a10df605db7501"
} |
For the debounce_switch module, how do the sequential elements and combinational logic in its AIG representation compare with the results after medium-level synthesis targeting area and delay, and what are the key figures? | The AIG of debounce_switch contains 3314 nodes and 8034 edges with average degree 2.42, including 24 $_DFF_PP0_ and 4 $_DFFE_PP0P_ flip-flops, and synthesis at the medium optimization level reduced this to 127 gates with an area of 139.0, a delay (critical path) of 219.91, power of 0.127, and 91 wires (232 wire bits), ... | github_repos/corundum_corundum/fpga/lib/pcie/example/ExaNIC_X25/fpga/rtl/debounce_switch.v | debounce_switch | graph_extractor+synthesis_tool | [
{
"graph_type": "AIG"
},
{
"optimization_level": "medium"
}
] | [graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_type": "AIG",
...[33391 chars elided]...
"node_count": 3314,
"edge_count": 8034,
"graph_properties": {
"node_types": {
"$_AND_": 1354,
"$_NOT_": 1928,
"$_DFF_PP0_": 24,
"$_DFFE_PP0P_": 4,
"port_input": 3,
... | multi_tool | graph_extractor+synthesis_tool | compositional | e425a9b89d31 | [{"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the debounce_switch module, how do the sequential elements and combinational logic in its AIG representation compare with the results after medium-level synthesis targeting area and delay, and what are the key figures?
[graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_type": "AIG"... | 7f9a6f114cbb | 74e95facef90 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/pcie/example/ExaNIC_X25/fpga/rtl/debounce_switch.v",
"sha256": "02d6ba80136cb9be942347e33c43881f465acbfc4f41b6af3a32d41c86b4ef5a"
} |
For ad_bus_mux, how do the current area and delay after synthesis compare with what the delay-focused optimization pass estimates, and is that trade-off worth it? | Synthesis of ad_bus_mux at medium effort produced an area of 63.0 with 54 gates and a critical path of 154.43. The delay-targeted optimization pass estimates a delay improvement of -20.0 but at the cost of 10.0 more area and 5.0 more power, so it shortens the critical path while increasing area and power. | github_repos/analogdevicesinc_hdl/library/common/ad_bus_mux.v | ad_bus_mux | optimization_advisor+synthesis_tool | [
{
"target_metric": "delay"
},
{
"optimization_level": "medium"
}
] | [optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metric": "delay",
"recommended_recipes": [
"synth -top ad_bus_mux",
"opt -fast",
"abc -fast -liberty stdcells.lib",
"opt_clean"
],
"optimization_suggestions": [
{
"type": "pipeline_insertion",
"des... | multi_tool | optimization_advisor+synthesis_tool | compositional | 1ef0e2c39fed | [{"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For ad_bus_mux, how do the current area and delay after synthesis compare with what the delay-focused optimization pass estimates, and is that trade-off worth it?
[optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metric": "delay",
"recommended_recipes": [
"synth -top ... | 8a95c318e0f9 | 74e1a1f9bc75 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/common/ad_bus_mux.v",
"sha256": "5d8d9baccdbbc8ec9d9c2d2144d5d05d68f948d7ead595146b5dabe51e445261"
} |
For the sync_reset module, how does the flip-flop structure shown in its CDFG relate to the synthesized results in terms of cell usage, delay, and power, and what reset behavior do the DFFs implement? | The CDFG shows a single $adff node with 2-bit width and active-high async reset (ARST_POLARITY 1, ARST_VALUE 11) driving the sync_reset_out port, which matches synthesis producing exactly 2 $_DFF_PP1_ cells (gate_count 2, area 2.0) clocked by clk with arst=rst. The synthesized design achieves a critical path (delay) of... | github_repos/corundum_corundum/fpga/lib/pcie/example/VCU118/fpga_axi/rtl/sync_reset.v | sync_reset | graph_extractor+synthesis_tool | [
{
"graph_type": "CDFG"
},
{
"optimization_level": "medium"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[102 chars elided]...
"node_count": 4,
"edge_count": 6,
"graph_properties": {
"node_types": {
"$adff": 1,
"port_input": 2,
"port_output": 1
},
"avg_degree": 1.5,
"module_name": "sync_rese... | multi_tool | graph_extractor+synthesis_tool | compositional | bdf9356d90a6 | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the sync_reset module, how does the flip-flop structure shown in its CDFG relate to the synthesized results in terms of cell usage, delay, and power, and what reset behavior do the DFFs implement?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[102 chars elid... | 65926ec273fa | 754262100752 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/pcie/example/VCU118/fpga_axi/rtl/sync_reset.v",
"sha256": "67ea2e751ee7cdf5c7528902eab32a63f11bd090e1380934fd7334b361c7d874"
} |
For the pcie_us_if_cq module, how does its source-code complexity compare with its synthesized implementation, i.e., what do the complexity metrics and the cell/area results together tell you about how heavy this design is? | The pcie_us_if_cq module is quite complex in source form, with 460 lines of code, a cyclomatic complexity of 53, a nesting depth of 64, 766 operators, and 17 total ports, and this translates into a substantial synthesized implementation of 790 gates, an area of 3387.0, and a critical-path delay of 1032.48 with power of... | github_repos/corundum_corundum/fpga/lib/pcie/rtl/pcie_us_if_cq.v | pcie_us_if_cq | static_analyzer+synthesis_tool | [
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "pcie_us_if_cq",
"port_count": {
"inputs": 8,
"outputs": 9,
"inouts": 0,
"total": 17
},
"signal_count": {
"wires": 7,
"regs": 4,
"parameters": 13,
"total": 11
},
"always_blocks": 2,
"assign_... | multi_tool | static_analyzer+synthesis_tool | compositional | 94630a43474a | [{"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the pcie_us_if_cq module, how does its source-code complexity compare with its synthesized implementation, i.e., what do the complexity metrics and the cell/area results together tell you about how heavy this design is?
[static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name":... | a82467ccf86f | 755987a324fa | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/pcie/rtl/pcie_us_if_cq.v",
"sha256": "b5e50b2b8f3df3c237b4ddf5ab383482fc3458aa8f2c80e237a4b80dbf37bd50"
} |
For pcie_us_if_cq, I'm considering applying the area-oriented optimization suggestions (resource sharing and mux sharing). Given the current post-synthesis results and module statistics, what impact should I expect, and is the module dominated by sequential elements? | After medium-effort synthesis, pcie_us_if_cq occupies 3387.0 area units with 790 cells — of which 650 are $_DFFE_PP_ flip-flops — a critical-path delay of 1032.48, power of 0.79, and 159 wires, with the statistics report confirming 0 processes and 0 memory bits (it instantiates one pcie_tlp_fifo submodule). Applying th... | github_repos/corundum_corundum/fpga/lib/pcie/rtl/pcie_us_if_cq.v | pcie_us_if_cq | optimization_advisor+synthesis_tool | [
{
"target_metric": "area"
},
{
"optimization_level": "medium"
}
] | [optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommended_recipes": [
"synth -top pcie_us_if_cq -flatten",
"opt -full; share -aggressive; opt",
"abc -g gates -liberty stdcells.lib",
"opt_clean -purge"
],
"optimization_suggestions": [
{
... | multi_tool | optimization_advisor+synthesis_tool | compositional | f36b2f59f836 | [{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For pcie_us_if_cq, I'm considering applying the area-oriented optimization suggestions (resource sharing and mux sharing). Given the current post-synthesis results and module statistics, what impact should I expect, and is the module dominated by sequential elements?
[optimization_advisor {"target_metric": "... | 69bda1a0d4f7 | 755987a324fa | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/pcie/rtl/pcie_us_if_cq.v",
"sha256": "b5e50b2b8f3df3c237b4ddf5ab383482fc3458aa8f2c80e237a4b80dbf37bd50"
} |
For axi_hdmi_tx_core, given that RTL-to-netlist signal mapping only achieved an alignment score of 46.28 with 65 of 121 RTL signals unmapped, how confident can I be in the synthesis results of area 3406.0, delay 660.24, and power 2.01, and what does the mapped-versus-unmapped split tell me? | Only 56 of the 121 RTL signals in axi_hdmi_tx_core were successfully mapped to the netlist, which contains 4445 wires, so the cross-check coverage is weak even though synthesis reports an area of 3406.0, a delay of 660.24, and a power of 2.01 with 2010 gates. Signals such as hdmi_16_data, hdmi_36_vsync, and hdmi_fs_tog... | github_repos/analogdevicesinc_hdl/library/axi_hdmi_tx/axi_hdmi_tx_core.v | axi_hdmi_tx_core | cross_stage_mapper+synthesis_tool | [
{},
{
"optimization_level": "medium"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"hdmi_clip_de_d": [],
"hdmi_de_2d": [],
"hdmi_16_hsync_d": [],
"hdmi_status": [],
"hdmi_ss_data_e_s": [
"hdmi_ss_data_e_s"
],
"vga_red": [],
"hdmi_16_es_data": [],
"hdmi_hs_count": [],
"hdmi_24_c... | multi_tool | cross_stage_mapper+synthesis_tool | compositional | 33f8793e1058 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For axi_hdmi_tx_core, given that RTL-to-netlist signal mapping only achieved an alignment score of 46.28 with 65 of 121 RTL signals unmapped, how confident can I be in the synthesis results of area 3406.0, delay 660.24, and power 2.01, and what does the mapped-versus-unmapped split tell me?
[cross_stage_mapp... | 276f73c5cfac | 75786886e004 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/axi_hdmi_tx/axi_hdmi_tx_core.v",
"sha256": "3dcdf3b9d6830a9679da2fe732117d96859242931f37101c72873babd9ee4092"
} |
For the module cntr_modulus_la, how do its structural characteristics (register count, cyclomatic complexity) relate to the synthesized implementation in terms of flip-flops, gate count, and critical-path delay? | cntr_modulus_la has only 1 register in the RTL with a cyclomatic complexity of 13, yet synthesis produced 17 flip-flops ($_DFFE_PP0P_ cells) within a total of 169 gates. The resulting area is 195.0 with a critical-path delay of 237.13 and power of 0.169. | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/counter/cntr_modulus_la.v | cntr_modulus_la | static_analyzer+synthesis_tool | [
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "cntr_modulus_la",
"port_count": {
"inputs": 1,
"outputs": 0,
"inouts": 0,
"total": 1
},
"signal_count": {
"wires": 0,
"regs": 1,
"parameters": 2,
"total": 1
},
"always_blocks": 2,
"assign_s... | multi_tool | static_analyzer+synthesis_tool | compositional | dceb6b3fafd9 | [{"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the module cntr_modulus_la, how do its structural characteristics (register count, cyclomatic complexity) relate to the synthesized implementation in terms of flip-flops, gate count, and critical-path delay?
[static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "cntr_modul... | 608def993905 | 759c806c9892 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/counter/cntr_modulus_la.v",
"sha256": "7f6ddbfdf65eb793be720ef6c9bdb208b4889ec3c37d7a815c51d6a84a9aec9b"
} |
For IBUFDS_INTERMDISABLE_INT, given that it's a simple combinatorial primitive with 4 inputs and 1 output and no registers, how much power improvement is the power optimization flow estimated to deliver, and is the suggested clock gating actually applicable given the module's structure? | The power optimization flow for IBUFDS_INTERMDISABLE_INT estimates a power improvement of -25.0 (with 5.0 area and 5.0 delay overhead), partly via clock gating for registers. However, since the module has 0 regs and 0 always blocks with cyclomatic complexity 1, there are no registers to gate, so clock gating is not app... | github_repos/aolofsson_oh/xilibs/dv/IBUFDS_INTERMDISABLE_INT.v | IBUFDS_INTERMDISABLE_INT | optimization_advisor+static_analyzer | [
{
"target_metric": "power"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "power"}]
{
"status": "success",
"target_metric": "power",
"recommended_recipes": [
"synth -top IBUFDS_INTERMDISABLE_INT",
"opt; share; opt",
"abc -g gates -liberty stdcells.lib",
"opt_clean; clockgate"
],
"optimization_suggestions": [
{
"type"... | multi_tool | optimization_advisor+static_analyzer | compositional | 7e387e0d57cd | [{"tool": "optimization_advisor", "parameters": {"target_metric": "power"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For IBUFDS_INTERMDISABLE_INT, given that it's a simple combinatorial primitive with 4 inputs and 1 output and no registers, how much power improvement is the power optimization flow estimated to deliver, and is the suggested clock gating actually applicable given the module's structure?
[optimization_advisor... | f3dba85f0dd7 | 7596db9edfd7 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "xilibs/dv/IBUFDS_INTERMDISABLE_INT.v",
"sha256": "b2cf78d5aee553df4e51eb9420341b8f9cc73ee916fb244ab83bbbd0415c79bf"
} |
For the axis_fifo module, does the size of its control/data-flow graph (CDFG) look consistent with the source-code complexity, and which structures dominate the graph? | The axis_fifo source has 409 lines of code, cyclomatic complexity 62, and 48 assign statements across 5 always blocks, which is consistent with the large CDFG of 16694 nodes and 243569 edges (average degree 14.59). The graph is dominated by storage and combinational logic: 4098 $dffe registers and 8368 $and gates plus ... | github_repos/corundum_corundum/fpga/mqnic/DK_DEV_1SDX_P_A/fpga_100g/rtl/axis_fifo.v | axis_fifo | graph_extractor+static_analyzer | [
{
"graph_type": "CDFG"
},
{
"analysis_type": "full"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[54367 chars elided]...
"node_count": 16694,
"edge_count": 243569,
"graph_properties": {
"node_types": {
"$eq": 2,
"$logic_or": 5,
"$or": 3,
"$mux": 4140,
"$logic_and": 8,
"$logic_n... | multi_tool | graph_extractor+static_analyzer | compositional | de17ad0a1a58 | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the axis_fifo module, does the size of its control/data-flow graph (CDFG) look consistent with the source-code complexity, and which structures dominate the graph?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[54367 chars elided]...
"node_count": 16694,
... | 5e4393efe106 | 75cb8535fecc | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/mqnic/DK_DEV_1SDX_P_A/fpga_100g/rtl/axis_fifo.v",
"sha256": "b49606665dcef7805fd2cc42ee8514402898a0dee1af2df61dd0a2d332d19a28"
} |
For the ct_f_spsram_2048x128 module, how does the synthesized gate-level structure relate to the structure shown in its CDFG, and what are the resulting area, delay, and power figures? | The CDFG of ct_f_spsram_2048x128 has 15 nodes and 338 edges (avg_degree 22.53), including 2 $logic_and, 3 $logic_not, 1 $dff, 1 $mux, 1 fpga_ram, 6 port_input, and 1 port_output nodes, while synthesis yields 47 gates and area 86.0. The synthesized netlist contains 22 $_NAND_, 11 $_DFF_P_, 11 $_ORNOT_, 1 $_ANDNOT_, 1 $_... | github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/fpga/rtl/ct_f_spsram_2048x128.v | ct_f_spsram_2048x128 | graph_extractor+synthesis_tool | [
{
"graph_type": "CDFG"
},
{
"optimization_level": "medium"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[24997 chars elided]...
"node_count": 15,
"edge_count": 338,
"graph_properties": {
"node_types": {
"$logic_and": 2,
"$logic_not": 3,
"$dff": 1,
"$mux": 1,
"fpga_ram": 1,
"port_input... | multi_tool | graph_extractor+synthesis_tool | compositional | b158334d14e2 | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the ct_f_spsram_2048x128 module, how does the synthesized gate-level structure relate to the structure shown in its CDFG, and what are the resulting area, delay, and power figures?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[24997 chars elided]...
"node... | 11d8ea5b316b | 75d80a789dd8 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/XUANTIE-RV/openc910",
"commit": "b91c90914c19f114d35c8f6b73408eb241ed847c",
"path": "C910_RTL_FACTORY/gen_rtl/fpga/rtl/ct_f_spsram_2048x128.v",
"sha256": "ab26200b3677e35f8c9ff6ea1eb48cc6a43a8ad9392b90950a8bb8e25130622d"
} |
For module oh_oa22, how does the number of wires in the gate-level netlist compare to the structure shown in the DFG extracted from the RTL, and can the two views be cross-mapped? | The DFG for oh_oa22 has 8 nodes and 9 edges, consisting of one $and gate, two $or gates, four input ports, and one output port. However, the gate-level netlist reports 14 netlist wires and 0 netlist cells, and since the RTL contained 0 rtl signals, the mapping produced an alignment score of 0.0 with 0 mapped signals, s... | github_repos/aolofsson_oh/stdlib/rtl/oh_oa22.v | oh_oa22 | cross_stage_mapper+graph_extractor | [
{},
{
"graph_type": "DFG"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {},
"alignment_score": 0.0,
"unmapped_elements": [],
"mapping_statistics": {
"rtl_signals": 0,
"netlist_wires": 14,
"netlist_cells": 0,
"mapped_signals": 0,
"unmapped_signals": 0
},
"error": null
}
[graph_extract... | multi_tool | cross_stage_mapper+graph_extractor | compositional | fd1148cbb8fc | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}] | Question: For module oh_oa22, how does the number of wires in the gate-level netlist compare to the structure shown in the DFG extracted from the RTL, and can the two views be cross-mapped?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {},
"alignment_score": 0.0,
"unmapped_elements":... | 4d2798e4cbf2 | 75f08ba00723 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "stdlib/rtl/oh_oa22.v",
"sha256": "4406af06691660d8904ba2b8e08501647f5d93ce8482ea6b612d6b9afbdeef2f"
} |
For the asic_oddr module, can you summarize how the RTL structure compares with the netlist mapping, using the code complexity figures and the mapping results together? | The asic_oddr RTL has 6 signals, 3 inputs and 2 outputs across 5 total ports, with 12 lines of code, cyclomatic complexity 5, and 30 operators, but the mapping only matched 3 of 6 RTL signals (alignment score 50.0) to the 10 netlist wires, leaving in1_sh, buffer, and input unmapped. | github_repos/aolofsson_oh/asiclib/hdl/asic_oddr.v | asic_oddr | cross_stage_mapper+static_analyzer | [
{},
{
"analysis_type": "full"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"in1": [
"in1"
],
"in1_sh": [],
"clk": [
"clk"
],
"buffer": [],
"input": [],
"out": [
"out"
]
},
"alignment_score": 50.0,
"unmapped_elements": [
"in1_sh",
"buffer",
"inp... | multi_tool | cross_stage_mapper+static_analyzer | compositional | d9ab17f41992 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the asic_oddr module, can you summarize how the RTL structure compares with the netlist mapping, using the code complexity figures and the mapping results together?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"in1": [
"in1"
],
"in1_sh": [],
"clk": ... | 14fbdd0ff7f2 | 766b4e272d58 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "asiclib/hdl/asic_oddr.v",
"sha256": "b6e8d9b59985d2b9329356adea6ce9fa4ea5946529766bb88efe30f3ea54a8c4"
} |
For the stream_mux module, if I apply the recommended area-optimization recipes (including aggressive resource sharing), what are the current baseline area, delay, and power from synthesis, and how would the area-focused optimization be expected to change them, given that area optimization may increase delay? | The current synthesis of stream_mux (medium optimization) reports an area of 80.5, a delay of 167.61, a power of 0.074, and 74 gates. The area-focused optimization advice estimates an area improvement of -15.0 and power of -10.0, but a delay increase of 5.0, consistent with its warning that area optimization may increa... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/debug/stream_mux.v | stream_mux | optimization_advisor+synthesis_tool | [
{
"target_metric": "area"
},
{
"optimization_level": "medium"
}
] | [optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommended_recipes": [
"synth -top stream_mux -flatten",
"opt -full; share -aggressive; opt",
"abc -g gates -liberty stdcells.lib",
"opt_clean -purge"
],
"optimization_suggestions": [
{
... | multi_tool | optimization_advisor+synthesis_tool | compositional | bf0286e5feb2 | [{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the stream_mux module, if I apply the recommended area-optimization recipes (including aggressive resource sharing), what are the current baseline area, delay, and power from synthesis, and how would the area-focused optimization be expected to change them, given that area optimization may increase delay?... | f10155bf6af3 | 7756823e4eb4 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/debug/stream_mux.v",
"sha256": "d752dd163cb4e4d943464edf3e2e7e28f49ebea19bb45521b214b111784fe24d"
} |
For the module test_axis_frame_length_adjust_fifo, considering that the delay-focused optimization advisor suggests pipelining and logic duplication, how do the expected trade-offs compare with the module's current complexity profile from a full static analysis? | For test_axis_frame_length_adjust_fifo, the delay optimization would reduce delay by -20.0 percent while increasing area by 10.0 percent and power by 5.0 percent. The static analysis shows the module is currently quite simple, with 138 lines of code, cyclomatic complexity 2, nesting depth 1, 8 wires, 9 regs, and 11 par... | github_repos/alexforencich_verilog-ethernet/lib/axis/tb/test_axis_frame_length_adjust_fifo.v | test_axis_frame_length_adjust_fifo | optimization_advisor+static_analyzer | [
{
"target_metric": "delay"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metric": "delay",
"recommended_recipes": [
"synth -top test_axis_frame_length_adjust_fifo",
"opt -fast",
"abc -fast -liberty stdcells.lib",
"opt_clean"
],
"optimization_suggestions": [
{
"type": "pipelin... | multi_tool | optimization_advisor+static_analyzer | compositional | 20b1ffbdad8b | [{"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the module test_axis_frame_length_adjust_fifo, considering that the delay-focused optimization advisor suggests pipelining and logic duplication, how do the expected trade-offs compare with the module's current complexity profile from a full static analysis?
[optimization_advisor {"target_metric": "delay... | f3f56849194c | 778ae1abbb3a | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/alexforencich/verilog-ethernet",
"commit": "77320a9471d19c7dd383914bc049e02d9f4f1ffb",
"path": "lib/axis/tb/test_axis_frame_length_adjust_fifo.v",
"sha256": "7b76f453e9805a4b595917cbdb73899480c3d6517d8f6184353b7a7fbac97d3c"
} |
For the axis_ram_switch module, how well did the RTL signals survive into the netlist mapping compared to what the source-level analysis reports, and given the synthesis results for area and power, is the mapping coverage a concern? Please pull together the mapping statistics, the source complexity figures, and the syn... | The source analysis of axis_ram_switch shows 44 signals total (19 wires, 25 regs) across 884 lines of code with cyclomatic complexity 86, but only 11 of 51 RTL signals were mapped to the netlist (40 unmapped) against 35722 netlist wires. Synthesis produced an area of 19510.5, a delay of 994.11, and a power of 13.637 wi... | github_repos/corundum_corundum/fpga/lib/eth/lib/axis/rtl/axis_ram_switch.v | axis_ram_switch | cross_stage_mapper+static_analyzer+synthesis_tool | [
{},
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"ram_wr_en": [
"port_ram_wr_en",
"ram_wr_en"
],
"rst": [
"rst"
],
"wire": [],
"out_axis_tvalid_reg": [],
"port": [
"port_ram_rd_data_valid",
"port_ram_wr_ack",
"port_r
...[1781 ... | multi_tool | cross_stage_mapper+static_analyzer+synthesis_tool | compositional | 9fe7be6f9203 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the axis_ram_switch module, how well did the RTL signals survive into the netlist mapping compared to what the source-level analysis reports, and given the synthesis results for area and power, is the mapping coverage a concern? Please pull together the mapping statistics, the source complexity figures, a... | ace1d4e22e89 | 77e23591d8af | train | glm-5.3 | 3 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/eth/lib/axis/rtl/axis_ram_switch.v",
"sha256": "bd73b8a982759528b4dd9a6e33396ce5c443ebac0f74ffd23d69ee4bc4b2de42"
} |
For the pcie_axi_master module, how well does the RTL-to-netlist signal mapping line up with the structure shown in its DFG, and which parts of the design dominate that dataflow graph? | The mapping is nearly perfect with an alignment score of 97.37, covering 37 of 38 RTL signals against 96 netlist wires, with only the generic signal "wire" unmapped. The DFG for pcie_axi_master contains 62 nodes and 3174 edges with an average degree of 51.19, and its node types show the design is dominated by I/O with ... | github_repos/corundum_corundum/fpga/lib/pcie/rtl/pcie_axi_master.v | pcie_axi_master | cross_stage_mapper+graph_extractor | [
{},
{
"graph_type": "DFG"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"rst": [
"m_axi_arburst",
"rst",
"m_axi_awburst"
],
"wire": [],
"read_rx_req_tlp_ready": [
"read_rx_req_tlp_ready"
],
"status_error_cor": [
"status_error_cor"
],
"m_axi_rresp": [
... | multi_tool | cross_stage_mapper+graph_extractor | compositional | 185401182a5a | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}] | Question: For the pcie_axi_master module, how well does the RTL-to-netlist signal mapping line up with the structure shown in its DFG, and which parts of the design dominate that dataflow graph?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"rst": [
"m_axi_arburst",
"rs... | 13356cd01179 | 779bf3a9debf | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/pcie/rtl/pcie_axi_master.v",
"sha256": "7003ff8fe3dc795f90bf9f7517a093d38ac3fa5cd8a8843fb2104bae410c3897"
} |
For the pcie_axi_master module, how do its structural characteristics (like the 313 lines of code and 54 ports with 0 always blocks) relate to the power optimization recommendations, and what power improvement is estimated if I apply clock gating given the module has no registers? | The pcie_axi_master module is a purely combinational interface with 313 lines of code, 54 ports (21 inputs, 33 outputs), and 0 always blocks or regs, so the recommended clock gating in the power optimization flow has little to latch onto; still, applying the suggested recipes (share, opt_clean, clockgate) is estimated ... | github_repos/corundum_corundum/fpga/lib/pcie/rtl/pcie_axi_master.v | pcie_axi_master | optimization_advisor+static_analyzer | [
{
"target_metric": "power"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "power"}]
{
"status": "success",
"target_metric": "power",
"recommended_recipes": [
"synth -top pcie_axi_master",
"opt; share; opt",
"abc -g gates -liberty stdcells.lib",
"opt_clean; clockgate"
],
"optimization_suggestions": [
{
"type": "clock_... | multi_tool | optimization_advisor+static_analyzer | compositional | 8100dd59e605 | [{"tool": "optimization_advisor", "parameters": {"target_metric": "power"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the pcie_axi_master module, how do its structural characteristics (like the 313 lines of code and 54 ports with 0 always blocks) relate to the power optimization recommendations, and what power improvement is estimated if I apply clock gating given the module has no registers?
[optimization_advisor {"tar... | 905bbccc36e6 | 779bf3a9debf | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/pcie/rtl/pcie_axi_master.v",
"sha256": "7003ff8fe3dc795f90bf9f7517a093d38ac3fa5cd8a8843fb2104bae410c3897"
} |
For the reset_control module, how does its DFG structure relate to the delay-focused optimization advice — does the structure explain the suggestions, and what improvement is expected? | The DFG for reset_control contains 11 nodes and 32 edges (avg_degree 2.91) with 7 reset_filter instances, and the delay optimization accordingly suggests pipelining and logic duplication to cut fanout, estimating delay -20.0 at the cost of area +10.0 and power +5.0. | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/synchronization/reset_control.v | reset_control | graph_extractor+optimization_advisor | [
{
"graph_type": "DFG"
},
{
"target_metric": "delay"
}
] | [graph_extractor {"graph_type": "DFG"}]
{
"status": "success",
"graph_type": "DFG",
...[4484 chars elided]...
"node_count": 11,
"edge_count": 32,
"graph_properties": {
"node_types": {
"$reduce_and": 1,
"reset_filter": 7,
"port_input": 2,
"port_output": 1
},
"avg_degree": 2.... | multi_tool | graph_extractor+optimization_advisor | compositional | 5b0668ada52e | [{"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}] | Question: For the reset_control module, how does its DFG structure relate to the delay-focused optimization advice — does the structure explain the suggestions, and what improvement is expected?
[graph_extractor {"graph_type": "DFG"}]
{
"status": "success",
"graph_type": "DFG",
...[4484 chars elided]...
"node_co... | 670c25c59749 | 77f0a90d93f8 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/synchronization/reset_control.v",
"sha256": "c0df22f5e60cb3abcefcef7984ad7a96121b3415a5b87c9ee4514348a49a2c17"
} |
For the module fpga, how does the cell count from synthesis compare with the structure shown in its CDFG, and what are the resulting delay and power figures? | The CDFG for fpga has 31 nodes including 1 $_NOT_ gate, 1 BUFG, 1 IBUFDS_GTE3, 1 IBUFGDS, 1 MMCME3_BASE, 1 eth_xcvr_phy_quad_wrapper, 1 fpga_core, and 1 sync_reset (with 638 edges and average degree 20.58), matching the synthesis cell count of 8. Synthesis reports a critical-path delay of 86.31 and power of 0.008. | github_repos/corundum_corundum/fpga/lib/eth/example/ExaNIC_X10/fpga/rtl/fpga.v | fpga | graph_extractor+synthesis_tool | [
{
"graph_type": "CDFG"
},
{
"optimization_level": "medium"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[23519 chars elided]...
"node_count": 31,
"edge_count": 638,
"graph_properties": {
"node_types": {
"$not": 1,
"IBUFGDS": 1,
"BUFG": 1,
"MMCME3_BASE": 1,
"fpga_core": 1,
"IBUFDS_GTE3... | multi_tool | graph_extractor+synthesis_tool | compositional | 5d8c97ec5b19 | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the module fpga, how does the cell count from synthesis compare with the structure shown in its CDFG, and what are the resulting delay and power figures?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[23519 chars elided]...
"node_count": 31,
"edge_count"... | e1b0495a613e | 7853aac494ed | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/eth/example/ExaNIC_X10/fpga/rtl/fpga.v",
"sha256": "ffe96e3b6ef2f0370c7403b3c91480f3dd2724ab74345f14a9e28f860a1a85e1"
} |
For the gearbox_20_67 module, how does its structural complexity in the CDFG compare with its source-level complexity, and are there any lint concerns given its port and signal structure? | The CDFG of gearbox_20_67 has 56 nodes and 1213 edges with an average degree of 21.66, dominated by 21 $eq nodes, while at the source level it is only 69 lines of code with a cyclomatic complexity of 11, nesting depth of 3, and 261 operators. It has 6 ports total (4 inputs, 2 outputs), 9 signals (1 wire, 8 regs), 1 alw... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/interlaken_lane/gearbox_20_67.v | gearbox_20_67 | graph_extractor+static_analyzer | [
{
"graph_type": "CDFG"
},
{
"analysis_type": "full"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[43582 chars elided]...
"node_count": 56,
"edge_count": 1213,
"graph_properties": {
"node_types": {
"$add": 1,
"$mux": 4,
"$and": 4,
"$not": 1,
"$xor": 1,
"$gt": 1,
"$logic_an... | multi_tool | graph_extractor+static_analyzer | compositional | eec54852ec27 | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the gearbox_20_67 module, how does its structural complexity in the CDFG compare with its source-level complexity, and are there any lint concerns given its port and signal structure?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[43582 chars elided]...
"n... | 3e7c4363223d | 783107a541e8 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/interlaken_lane/gearbox_20_67.v",
"sha256": "276dc17d87a3054e4e528c4be6cb509d84b06bdae4feb8096f933b580ed7de82"
} |
For the lfsr15_8 module, the synthesis report gives a critical path delay of 154.81 with 23 gates. If I follow the delay-focused optimization suggestions, what improvement can I expect, and how would that affect the area and power relative to the reported values? | The synthesis report shows lfsr15_8 currently has an area of 31.0, delay of 154.81, and power of 0.023 with 23 gates. Applying the delay optimization is estimated to reduce delay by -20.0 at the cost of increasing area by 10.0 and power by 5.0, so the already small design (15 $_DFFE_PN1P_ flip-flops and 8 XOR gates) wo... | github_repos/analogdevicesinc_hdl/library/axi_hsci/lfsr15_8.v | lfsr15_8 | optimization_advisor+synthesis_tool | [
{
"target_metric": "delay"
},
{
"optimization_level": "medium"
}
] | [optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metric": "delay",
"recommended_recipes": [
"synth -top lfsr15_8",
"opt -fast",
"abc -fast -liberty stdcells.lib",
"opt_clean"
],
"optimization_suggestions": [
{
"type": "pipeline_insertion",
"descr... | multi_tool | optimization_advisor+synthesis_tool | compositional | fd667bd191af | [{"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the lfsr15_8 module, the synthesis report gives a critical path delay of 154.81 with 23 gates. If I follow the delay-focused optimization suggestions, what improvement can I expect, and how would that affect the area and power relative to the reported values?
[optimization_advisor {"target_metric": "dela... | 7e85d3f5a1d2 | 7863aa5f3d7c | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/axi_hsci/lfsr15_8.v",
"sha256": "b7564b68dada30d8e400ed94bb07f0a296f22e5f8ea2b10550125e512ee3a754"
} |
For the oh_aoi33 module, how does its structural complexity in the AIG representation compare with its source-level code complexity, and is there any lint concern? | In the AIG, oh_aoi33 has 16 nodes and 23 edges with an average degree of 1.44, composed of 5 AND nodes, 4 NOT nodes, 6 input ports and 1 output port. At the source level it is very simple: 1 assign statement, cyclomatic complexity 1, nesting depth 0, 29 operators, and 12 lines of code out of 21 total lines. The lint ch... | github_repos/aolofsson_oh/stdlib/rtl/oh_aoi33.v | oh_aoi33 | graph_extractor+static_analyzer | [
{
"graph_type": "AIG"
},
{
"analysis_type": "full"
}
] | [graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_type": "AIG",
...[3679 chars elided]...
"node_count": 16,
"edge_count": 23,
"graph_properties": {
"node_types": {
"$_AND_": 5,
"$_NOT_": 4,
"port_input": 6,
"port_output": 1
},
"avg_degree": 1.44,
"mo... | multi_tool | graph_extractor+static_analyzer | compositional | 0557fc32edc0 | [{"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the oh_aoi33 module, how does its structural complexity in the AIG representation compare with its source-level code complexity, and is there any lint concern?
[graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_type": "AIG",
...[3679 chars elided]...
"node_count": 16,
"edge_cou... | de9dff97361d | 79107ce94be9 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "stdlib/rtl/oh_aoi33.v",
"sha256": "c0abb7a213041e4a866c478b7f4261d97a9b0ff854c9786ef967b237562ba44c"
} |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.