question
string
answer
string
source_file
string
module_name
string
tool_name
string
tool_parameters
list
tool_result
string
category
string
subcategory
string
difficulty
string
question_hash
string
stage1_target
string
stage2_context
string
plan_id
string
design_id
string
split
string
writer_model
string
n_calls
int64
ctx_cap
int64
source
dict
For the test_udp_ip_tx module, I'm considering applying the aggressive area optimization. How would that affect delay and power, and given the module's size and structure, is it a reasonable choice?
The area optimization for test_udp_ip_tx is estimated to improve area by -15.0 and power by -10.0, but at the cost of a 5.0 delay increase since area optimization may increase delay and aggressive sharing increases routing complexity. The module is fairly small — 196 lines of code with 25 wires and 29 regs — and it mai...
github_repos/corundum_corundum/fpga/lib/eth/tb/test_udp_ip_tx.v
test_udp_ip_tx
optimization_advisor+static_analyzer
[ { "target_metric": "area" }, { "analysis_type": "full" } ]
[optimization_advisor {"target_metric": "area"}] { "status": "success", "target_metric": "area", "recommended_recipes": [ "synth -top test_udp_ip_tx -flatten", "opt -full; share -aggressive; opt", "abc -g gates -liberty stdcells.lib", "opt_clean -purge" ], "optimization_suggestions": [ { ...
multi_tool
optimization_advisor+static_analyzer
compositional
bd2e0bb2f3b3
[{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For the test_udp_ip_tx module, I'm considering applying the aggressive area optimization. How would that affect delay and power, and given the module's size and structure, is it a reasonable choice? [optimization_advisor {"target_metric": "area"}] { "status": "success", "target_metric": "area", "recomm...
767c23c73ea7
79cdadd6f8c4
train
glm-5.3
2
3,300
{ "repository": "https://github.com/corundum/corundum", "commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce", "path": "fpga/lib/eth/tb/test_udp_ip_tx.v", "sha256": "5e3e8084795908cb66ef0da27f80ad05215b59867d8fc5859bd759e842fd578f" }
For the system_top module, given that aggressive resource sharing is being considered to reduce area, how would the estimated trade-offs from that area optimization interact with the design's structural characteristics reported by the full static analysis, and what key figures should I keep in mind?
The area optimization for system_top is estimated to improve area by -15.0 and power by -10.0 but worsen delay by 5.0, and aggressive sharing increases routing complexity. Since the module has 77 inout ports out of 149 total, instantiates primitives like IBUFDS, OBUFDS, IBUFDS, and BUFG, and contains 539 operators acro...
github_repos/analogdevicesinc_hdl/projects/adrv9009/zc706/system_top.v
system_top
optimization_advisor+static_analyzer
[ { "target_metric": "area" }, { "analysis_type": "full" } ]
[optimization_advisor {"target_metric": "area"}] { "status": "success", "target_metric": "area", "recommended_recipes": [ "synth -top system_top -flatten", "opt -full; share -aggressive; opt", "abc -g gates -liberty stdcells.lib", "opt_clean -purge" ], "optimization_suggestions": [ { ...
multi_tool
optimization_advisor+static_analyzer
compositional
f4f235fb0d82
[{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For the system_top module, given that aggressive resource sharing is being considered to reduce area, how would the estimated trade-offs from that area optimization interact with the design's structural characteristics reported by the full static analysis, and what key figures should I keep in mind? [optimiz...
309fa32d112d
79dda40e296c
train
glm-5.3
2
3,300
{ "repository": "https://github.com/analogdevicesinc/hdl", "commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f", "path": "projects/adrv9009/zc706/system_top.v", "sha256": "999ec1ecce2ade5dc336c6fae001744bc243c4a35b5d74d59aee6fe04292cac0" }
For the plic_hreg_busif module, how do the control/data-flow structure and the synthesis results relate — specifically, what dominates the CDFG node types, and how does that compare with the cell breakdown, area, and delay reported after medium-level optimization?
The CDFG of plic_hreg_busif is dominated by comparison logic, with 2231 $eq nodes out of 4434 total nodes and 272326 edges, and this matches the synthesized netlist where combinational logic dominates the 71522 gates, including 31703 $_AND_ and 22732 $_NAND_ cells. Synthesis at medium optimization level reports an area...
github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/plic/rtl/plic_hreg_busif.v
plic_hreg_busif
graph_extractor+synthesis_tool
[ { "graph_type": "CDFG" }, { "optimization_level": "medium" } ]
[graph_extractor {"graph_type": "CDFG"}] { "status": "success", "graph_type": "CDFG", ...[70378 chars elided]... "node_count": 4434, "edge_count": 272326, "graph_properties": { "node_types": { "$logic_and": 674, "$logic_not": 42, "$eq": 2231, "$and": 458, "$or": 292, "$...
multi_tool
graph_extractor+synthesis_tool
compositional
08d6ad773ede
[{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}]
Question: For the plic_hreg_busif module, how do the control/data-flow structure and the synthesis results relate — specifically, what dominates the CDFG node types, and how does that compare with the cell breakdown, area, and delay reported after medium-level optimization? [graph_extractor {"graph_type": "CDFG"}] {...
6a2554f4f0a3
79e9b9f93a77
train
glm-5.3
2
3,300
{ "repository": "https://github.com/XUANTIE-RV/openc910", "commit": "b91c90914c19f114d35c8f6b73408eb241ed847c", "path": "C910_RTL_FACTORY/gen_rtl/plic/rtl/plic_hreg_busif.v", "sha256": "a81cccc22349e124615b95203d94a89a9e67124aa70ce3706e1f4199289bb9cc" }
For the eth_mac_10g module, given that its AIG graph analysis shows 96 nodes and 621 edges, is it worth applying the recommended area optimization recipes, and what delay/power impact should I expect?
The eth_mac_10g AIG has 96 nodes and 621 edges with an average degree of 6.47, so applying the area optimization recipes (e.g., 'share -aggressive' and mux sharing) is reasonable since it is estimated to reduce area by -15.0 and power by -10.0. However, delay is expected to increase by 5.0, and the analysis warns that ...
github_repos/alexforencich_verilog-ethernet/rtl/eth_mac_10g.v
eth_mac_10g
graph_extractor+optimization_advisor
[ { "graph_type": "AIG" }, { "target_metric": "area" } ]
[graph_extractor {"graph_type": "AIG"}] { "status": "success", "graph_type": "AIG", ...[51113 chars elided]... "node_count": 96, "edge_count": 621, "graph_properties": { "node_types": { "axis_xgmii_rx_64": 1, "axis_xgmii_tx_64": 1, "port_input": 57, "port_output": 37 }, "av...
multi_tool
graph_extractor+optimization_advisor
compositional
be2670930aaf
[{"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}]
Question: For the eth_mac_10g module, given that its AIG graph analysis shows 96 nodes and 621 edges, is it worth applying the recommended area optimization recipes, and what delay/power impact should I expect? [graph_extractor {"graph_type": "AIG"}] { "status": "success", "graph_type": "AIG", ...[51113 chars elid...
c6e6420c13de
7a214fd5d879
train
glm-5.3
2
3,300
{ "repository": "https://github.com/alexforencich/verilog-ethernet", "commit": "77320a9471d19c7dd383914bc049e02d9f4f1ffb", "path": "rtl/eth_mac_10g.v", "sha256": "bcc21bf95ef53be1f5c363d1e03368c1b99bfe520273a5c576f7024cd13ac310" }
For ct_ciu_ctcq_respq_entry, is it worth applying the aggressive area optimization recipes given the module's complexity, and what delay/area impact should I expect?
ct_ciu_ctcq_respq_entry is fairly complex, with 197 lines of code, cyclomatic complexity 46, nesting depth 9, 488 operators, 8 always blocks, and 17 ports (14 inputs and 3 outputs), so the aggressive resource sharing recommended for area could increase routing complexity. The estimated improvement is -15.0 for area but...
github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/ciu/rtl/ct_ciu_ctcq_respq_entry.v
ct_ciu_ctcq_respq_entry
optimization_advisor+static_analyzer
[ { "target_metric": "area" }, { "analysis_type": "full" } ]
[optimization_advisor {"target_metric": "area"}] { "status": "success", "target_metric": "area", "recommended_recipes": [ "synth -top ct_ciu_ctcq_respq_entry -flatten", "opt -full; share -aggressive; opt", "abc -g gates -liberty stdcells.lib", "opt_clean -purge" ], "optimization_suggestions": ...
multi_tool
optimization_advisor+static_analyzer
compositional
f1275442c330
[{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For ct_ciu_ctcq_respq_entry, is it worth applying the aggressive area optimization recipes given the module's complexity, and what delay/area impact should I expect? [optimization_advisor {"target_metric": "area"}] { "status": "success", "target_metric": "area", "recommended_recipes": [ "synth -top...
2fc21406c6c8
79864b45c6bf
train
glm-5.3
2
3,300
{ "repository": "https://github.com/XUANTIE-RV/openc910", "commit": "b91c90914c19f114d35c8f6b73408eb241ed847c", "path": "C910_RTL_FACTORY/gen_rtl/ciu/rtl/ct_ciu_ctcq_respq_entry.v", "sha256": "52ffe9d9703b4fd067a50eb3360d4c21134b51b9c8f500df3f5d6b97f3d84c4f" }
For the module pcie_tlp_fc_count, how does the control-flow-heavy structure seen in its CDFG relate to the module's overall size and complexity — in particular, compare the number of mux nodes and average connectivity in the graph with the port and complexity figures?
The CDFG of pcie_tlp_fc_count has 68 nodes and 529 edges with an average degree of 7.78, and it is dominated by control logic with 33 $mux nodes out of 68 nodes, consistent with the 6 assign statements and 2 always blocks in the RTL. This mux-heavy structure is reflected in a cyclomatic complexity of 12 with a nesting ...
github_repos/corundum_corundum/fpga/lib/pcie/rtl/pcie_tlp_fc_count.v
pcie_tlp_fc_count
graph_extractor+static_analyzer
[ { "graph_type": "CDFG" }, { "analysis_type": "full" } ]
[graph_extractor {"graph_type": "CDFG"}] { "status": "success", "graph_type": "CDFG", ...[38728 chars elided]... "node_count": 68, "edge_count": 529, "graph_properties": { "node_types": { "$add": 1, "$logic_not": 2, "$logic_and": 2, "$eq": 2, "$sdff": 6, "$reduce_or": 6...
multi_tool
graph_extractor+static_analyzer
compositional
37a7f5f1047f
[{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For the module pcie_tlp_fc_count, how does the control-flow-heavy structure seen in its CDFG relate to the module's overall size and complexity — in particular, compare the number of mux nodes and average connectivity in the graph with the port and complexity figures? [graph_extractor {"graph_type": "CDFG"}]...
96799804fd16
79f5e8321aab
train
glm-5.3
2
3,300
{ "repository": "https://github.com/corundum/corundum", "commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce", "path": "fpga/lib/pcie/rtl/pcie_tlp_fc_count.v", "sha256": "05c471cf6dbb21948be867340aed09507e369dff69aeb4cd7c13f7845ff191be" }
For the dut module, how does its structural complexity as seen in the DFG compare with its code-level complexity, and is the design purely combinational?
The DFG of dut has 18 nodes and 581 edges with an average degree of 32.28, combining $and, $not, and $reduce_or operators with 5 output ports and 8 input ports, which contrasts with the modest code complexity of 82 lines of code, cyclomatic complexity 3, nesting depth 0, and 168 operators. The design is purely combinat...
github_repos/aolofsson_oh/mio/dv/dut_mio.v
dut
graph_extractor+static_analyzer
[ { "graph_type": "DFG" }, { "analysis_type": "full" } ]
[graph_extractor {"graph_type": "DFG"}] { "status": "success", "graph_type": "DFG", ...[22466 chars elided]... "node_count": 18, "edge_count": 581, "graph_properties": { "node_types": { "$and": 2, "$not": 1, "$reduce_or": 1, "mio": 1, "port_output": 5, "port_input": 8 ...
multi_tool
graph_extractor+static_analyzer
compositional
923f15b06dae
[{"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For the dut module, how does its structural complexity as seen in the DFG compare with its code-level complexity, and is the design purely combinational? [graph_extractor {"graph_type": "DFG"}] { "status": "success", "graph_type": "DFG", ...[22466 chars elided]... "node_count": 18, "edge_count": 581,...
8f6d2c989f22
7abc49ec0e57
train
glm-5.3
2
3,300
{ "repository": "https://github.com/aolofsson/oh", "commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067", "path": "mio/dv/dut_mio.v", "sha256": "765cdc2bc7e2f286ab6872ae78053d4636ebd5808a5cbad5e239179ad459b8fe" }
For test_udp_ip_rx_64, is area optimization worthwhile given its code structure — what improvement is expected and does the module look complex enough to benefit from aggressive resource sharing?
The area optimization recipes for test_udp_ip_rx_64 (including share -aggressive) are estimated to reduce area by -15.0 and power by -10.0 at the cost of a 5.0 delay increase. The module itself is only a 208-line testbench with 58 total signals (31 wires, 27 regs), cyclomatic complexity of 2, and it instantiates udp_ip...
github_repos/corundum_corundum/fpga/lib/eth/tb/test_udp_ip_rx_64.v
test_udp_ip_rx_64
optimization_advisor+static_analyzer
[ { "target_metric": "area" }, { "analysis_type": "full" } ]
[optimization_advisor {"target_metric": "area"}] { "status": "success", "target_metric": "area", "recommended_recipes": [ "synth -top test_udp_ip_rx_64 -flatten", "opt -full; share -aggressive; opt", "abc -g gates -liberty stdcells.lib", "opt_clean -purge" ], "optimization_suggestions": [ ...
multi_tool
optimization_advisor+static_analyzer
compositional
3b8059890a14
[{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For test_udp_ip_rx_64, is area optimization worthwhile given its code structure — what improvement is expected and does the module look complex enough to benefit from aggressive resource sharing? [optimization_advisor {"target_metric": "area"}] { "status": "success", "target_metric": "area", "recommend...
6746e25a77e0
7af9f9f92d16
train
glm-5.3
2
3,300
{ "repository": "https://github.com/corundum/corundum", "commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce", "path": "fpga/lib/eth/tb/test_udp_ip_rx_64.v", "sha256": "d8c2502ed30b43be04c02744ee28b6263df8e950df59f00c2fa88ac5bad5ef06" }
For the elink module, how do the port and instantiation structure relate to the synthesized results, and what delay-focused optimization could be applied given the current critical path?
The elink module has 29 total ports (13 inputs and 16 outputs) and instantiates eight submodules including MISC, erx, and etx, while synthesis reduced this to 4 cells (elink_cfg, erx, etx, oh_fifo_cdc) with a critical path estimate of 75.79. A delay-targeted optimization pass suggests register retiming/pipelining of ar...
github_repos/aolofsson_oh/elink/hdl/elink.v
elink
optimization_advisor+static_analyzer+synthesis_tool
[ { "target_metric": "delay" }, { "analysis_type": "full" }, { "optimization_level": "medium" } ]
[optimization_advisor {"target_metric": "delay"}] { "status": "success", "target_metric": "delay", "recommended_recipes": [ "synth -top elink", "opt -fast", "abc -fast -liberty stdcells.lib", "opt_clean" ], "optimization_suggestions": [ { "type": "pipeline_insertion", "descript...
multi_tool
optimization_advisor+static_analyzer+synthesis_tool
compositional
360bc574b73f
[{"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}]
Question: For the elink module, how do the port and instantiation structure relate to the synthesized results, and what delay-focused optimization could be applied given the current critical path? [optimization_advisor {"target_metric": "delay"}] { "status": "success", "target_metric": "delay", "recommended_reci...
28cff2b525a4
7b66a174a003
train
glm-5.3
3
3,300
{ "repository": "https://github.com/aolofsson/oh", "commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067", "path": "elink/hdl/elink.v", "sha256": "6b714a031198c3f6dd338554846266f1b5291c6918f6c7cebf1b86c601b1d614" }
For the etx_arbiter module, is the delay optimization worth pursuing given its code complexity, and what are the estimated trade-offs and main structural features of the design?
Yes: the delay-targeted optimization for etx_arbiter is estimated to reduce delay by -20.0, at the cost of 10.0 more area and 5.0 more power, with suggested register retiming and fanout-reducing logic duplication. The module is moderately complex, with 103 lines of code, cyclomatic complexity 12, and 158 operators, plu...
github_repos/aolofsson_oh/elink/hdl/etx_arbiter.v
etx_arbiter
optimization_advisor+static_analyzer
[ { "target_metric": "delay" }, { "analysis_type": "full" } ]
[optimization_advisor {"target_metric": "delay"}] { "status": "success", "target_metric": "delay", "recommended_recipes": [ "synth -top etx_arbiter", "opt -fast", "abc -fast -liberty stdcells.lib", "opt_clean" ], "optimization_suggestions": [ { "type": "pipeline_insertion", "de...
multi_tool
optimization_advisor+static_analyzer
compositional
f0a1efbfb8a8
[{"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For the etx_arbiter module, is the delay optimization worth pursuing given its code complexity, and what are the estimated trade-offs and main structural features of the design? [optimization_advisor {"target_metric": "delay"}] { "status": "success", "target_metric": "delay", "recommended_recipes": [ ...
dce7352baa83
7b3aa7578610
train
glm-5.3
2
3,300
{ "repository": "https://github.com/aolofsson/oh", "commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067", "path": "elink/hdl/etx_arbiter.v", "sha256": "f529960e92c70e79a6629368fece7d4385104a6cdc1af27080ea3d9d175e4ffc" }
For the udp_ip_tx module, how would applying the area optimization flow affect area, delay, and power, and how does that trade-off relate to the module's complexity as reported by its full static analysis?
The area optimization for udp_ip_tx is estimated to improve area by -15.0 and power by -10.0 but worsen delay by 5.0, with trade-offs noting that area optimization may increase delay and that aggressive sharing increases routing complexity. This matters because udp_ip_tx is a fairly large module with 407 lines of code,...
github_repos/corundum_corundum/fpga/lib/eth/rtl/udp_ip_tx.v
udp_ip_tx
optimization_advisor+static_analyzer
[ { "target_metric": "area" }, { "analysis_type": "full" } ]
[optimization_advisor {"target_metric": "area"}] { "status": "success", "target_metric": "area", "recommended_recipes": [ "synth -top udp_ip_tx -flatten", "opt -full; share -aggressive; opt", "abc -g gates -liberty stdcells.lib", "opt_clean -purge" ], "optimization_suggestions": [ { ...
multi_tool
optimization_advisor+static_analyzer
compositional
43a05161dd03
[{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For the udp_ip_tx module, how would applying the area optimization flow affect area, delay, and power, and how does that trade-off relate to the module's complexity as reported by its full static analysis? [optimization_advisor {"target_metric": "area"}] { "status": "success", "target_metric": "area", ...
ee7854cc7ef1
7bc1c86e954d
train
glm-5.3
2
3,300
{ "repository": "https://github.com/corundum/corundum", "commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce", "path": "fpga/lib/eth/rtl/udp_ip_tx.v", "sha256": "c5e3cd5a4e4b418b7315e7c39f6e0124bd0fcec3f4e073d949ae1235a606846c" }
For the axil_crossbar_addr module, how does its structural size compare with its code-level complexity — specifically, what does the CDFG contain in terms of node and edge counts, and how does that relate to its cyclomatic complexity and total lines of code?
The CDFG of axil_crossbar_addr has 74 nodes and 1068 edges with an average degree of 14.43, which is dense relative to its source complexity of cyclomatic complexity 29 and 247 lines of code out of 310 total lines. The high edge-to-node density comes largely from the 20 $mux nodes and 8 $logic_not nodes in the graph, r...
github_repos/corundum_corundum/fpga/lib/axi/rtl/axil_crossbar_addr.v
axil_crossbar_addr
graph_extractor+static_analyzer
[ { "graph_type": "CDFG" }, { "analysis_type": "full" } ]
[graph_extractor {"graph_type": "CDFG"}] { "status": "success", "graph_type": "CDFG", ...[45148 chars elided]... "node_count": 74, "edge_count": 1068, "graph_properties": { "node_types": { "$print": 5, "$logic_and": 5, "$logic_not": 8, "$eq": 4, "$sdff": 5, "$dffe": 1, ...
multi_tool
graph_extractor+static_analyzer
compositional
c4631e9b2590
[{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For the axil_crossbar_addr module, how does its structural size compare with its code-level complexity — specifically, what does the CDFG contain in terms of node and edge counts, and how does that relate to its cyclomatic complexity and total lines of code? [graph_extractor {"graph_type": "CDFG"}] { "stat...
b4021bc2df11
7b2446d226de
train
glm-5.3
2
3,300
{ "repository": "https://github.com/corundum/corundum", "commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce", "path": "fpga/lib/axi/rtl/axil_crossbar_addr.v", "sha256": "a687cef2780b571b1a1b85746e4e093d0d7131d77bf9d6c610f333b0e27480c0" }
For ct_had_ddc_ctrl, how well do the RTL signals carry over after synthesis, and given the mapped signals versus the synthesis results, would you say the design is small and fast enough to leave as is? Please mention the mapping score, the unmapped signals, and the delay-optimized synthesis area and power figures.
The RTL-to-netlist mapping for ct_had_ddc_ctrl achieved an alignment score of 90.48 with 19 of 21 RTL signals mapped and only addr_ld_finish and cur_st unmapped, while medium-level delay/power synthesis produced a small design of 58 gates, area 61.0, delay 155.64, and power 0.058. Given the strong alignment and modest ...
github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/had/rtl/ct_had_ddc_ctrl.v
ct_had_ddc_ctrl
cross_stage_mapper+synthesis_tool
[ {}, { "optimization_level": "medium" } ]
[cross_stage_mapper {}] { "status": "success", "rtl_to_netlist_mapping": { "rtu_yy_xx_retire0_normal": [ "rtu_yy_xx_retire0_normal" ], "ddc_ctrl_dp_stw_sel": [ "ddc_ctrl_dp_stw_sel" ], "ddc_ctrl_dp_addr_sel": [ "ddc_ctrl_dp_addr_sel" ], "addr_ready": [ "addr_ready...
multi_tool
cross_stage_mapper+synthesis_tool
compositional
e9ff02b4dccb
[{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}]
Question: For ct_had_ddc_ctrl, how well do the RTL signals carry over after synthesis, and given the mapped signals versus the synthesis results, would you say the design is small and fast enough to leave as is? Please mention the mapping score, the unmapped signals, and the delay-optimized synthesis area and power fig...
f28f736822e9
7bc96a8d7b85
train
glm-5.3
2
3,300
{ "repository": "https://github.com/XUANTIE-RV/openc910", "commit": "b91c90914c19f114d35c8f6b73408eb241ed847c", "path": "C910_RTL_FACTORY/gen_rtl/had/rtl/ct_had_ddc_ctrl.v", "sha256": "e2d9e79ccf952983538e8a26dbb64e71676b8d739cd629c9168019e0bf2e192e" }
For the module ct_had_ddc_ctrl, how does the DFG structure compare with the synthesis results — what are the node and edge counts of its DFG, and what are the resulting gate count and power after delay-oriented synthesis at medium optimization?
The DFG of ct_had_ddc_ctrl has 40 nodes and 264 edges with an average degree of 6.6, and after synthesis at medium optimization it maps to 58 gates with a power of 0.058 and a delay of 155.64.
github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/had/rtl/ct_had_ddc_ctrl.v
ct_had_ddc_ctrl
graph_extractor+synthesis_tool
[ { "graph_type": "DFG" }, { "optimization_level": "medium" } ]
[graph_extractor {"graph_type": "DFG"}] { "status": "success", "graph_type": "DFG", ...[30018 chars elided]... "node_count": 40, "edge_count": 264, "graph_properties": { "node_types": { "$logic_and": 3, "$logic_or": 2, "$adffe": 1, "$ne": 1, "$adff": 1, "$mux": 9, ...
multi_tool
graph_extractor+synthesis_tool
compositional
cbe51a782725
[{"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}]
Question: For the module ct_had_ddc_ctrl, how does the DFG structure compare with the synthesis results — what are the node and edge counts of its DFG, and what are the resulting gate count and power after delay-oriented synthesis at medium optimization? [graph_extractor {"graph_type": "DFG"}] { "status": "success",...
9678f0ed0084
7bc96a8d7b85
train
glm-5.3
2
3,300
{ "repository": "https://github.com/XUANTIE-RV/openc910", "commit": "b91c90914c19f114d35c8f6b73408eb241ed847c", "path": "C910_RTL_FACTORY/gen_rtl/had/rtl/ct_had_ddc_ctrl.v", "sha256": "e2d9e79ccf952983538e8a26dbb64e71676b8d739cd629c9168019e0bf2e192e" }
For the ssio_ddr_in module, how does its structural complexity compare with what the AIG shows — can you summarize the port counts, code complexity, and the graph structure including its average degree?
The ssio_ddr_in module has 10 total ports (7 inputs and 3 outputs), 98 lines of code with cyclomatic complexity 12 and nesting depth 5, while its AIG contains 6 nodes (1 iddr, 2 port_inputs, 3 port_outputs) connected by 4 edges for an average degree of 0.67. Structurally, the module is centered on a single IODDR instan...
github_repos/corundum_corundum/fpga/lib/eth/rtl/ssio_ddr_in.v
ssio_ddr_in
graph_extractor+static_analyzer
[ { "graph_type": "AIG" }, { "analysis_type": "full" } ]
[graph_extractor {"graph_type": "AIG"}] { "status": "success", "graph_type": "AIG", ...[207 chars elided]... "node_count": 6, "edge_count": 4, "graph_properties": { "node_types": { "iddr": 1, "port_input": 2, "port_output": 3 }, "avg_degree": 0.67, "module_name": "ssio_ddr_in...
multi_tool
graph_extractor+static_analyzer
compositional
c82b7ad28207
[{"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For the ssio_ddr_in module, how does its structural complexity compare with what the AIG shows — can you summarize the port counts, code complexity, and the graph structure including its average degree? [graph_extractor {"graph_type": "AIG"}] { "status": "success", "graph_type": "AIG", ...[207 chars elid...
4afcb6ac26af
7c60ef7220f3
train
glm-5.3
2
3,300
{ "repository": "https://github.com/corundum/corundum", "commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce", "path": "fpga/lib/eth/rtl/ssio_ddr_in.v", "sha256": "ba78fec337d5889fa87acf31079c44e19b2592da714347a5c1b915284707bf1b" }
For the ssio_ddr_in module, how do the DFG structure and the post-synthesis results relate to each other, and does the area/delay/power report match what the data-flow graph suggests?
The DFG for ssio_ddr_in contains 6 nodes and 4 edges with a single iddr instance driving three output ports (q1, q2, etc.) from two input ports, and synthesis at medium optimization confirms this by producing exactly 1 cell (an iddr), gate_count 1, 7 wires/7 wire bits. The figures are consistent: the minimal graph (avg...
github_repos/corundum_corundum/fpga/lib/eth/rtl/ssio_ddr_in.v
ssio_ddr_in
graph_extractor+synthesis_tool
[ { "graph_type": "DFG" }, { "optimization_level": "medium" } ]
[graph_extractor {"graph_type": "DFG"}] { "status": "success", "graph_type": "DFG", ...[207 chars elided]... "node_count": 6, "edge_count": 4, "graph_properties": { "node_types": { "iddr": 1, "port_input": 2, "port_output": 3 }, "avg_degree": 0.67, "module_name": "ssio_ddr_in...
multi_tool
graph_extractor+synthesis_tool
compositional
4d9375d6a29a
[{"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}]
Question: For the ssio_ddr_in module, how do the DFG structure and the post-synthesis results relate to each other, and does the area/delay/power report match what the data-flow graph suggests? [graph_extractor {"graph_type": "DFG"}] { "status": "success", "graph_type": "DFG", ...[207 chars elided]... "node_coun...
c90964e4547d
7c60ef7220f3
train
glm-5.3
2
3,300
{ "repository": "https://github.com/corundum/corundum", "commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce", "path": "fpga/lib/eth/rtl/ssio_ddr_in.v", "sha256": "ba78fec337d5889fa87acf31079c44e19b2592da714347a5c1b915284707bf1b" }
For the test_axis_async_fifo_adapter_8_64 module, how do its code structure and the power-oriented optimization suggestions relate, and what power improvement is estimated?
The module test_axis_async_fifo_adapter_8_64 has 8 regs, 3 wires and 19 parameters with low complexity (cyclomatic complexity 2, nesting depth 1), so the power-focused advice of clock gating and operand isolation applies mainly to those registers, with an estimated improvement of -25.0 percent power (plus 5.0 in area a...
github_repos/alexforencich_verilog-ethernet/lib/axis/tb/test_axis_async_fifo_adapter_8_64.v
test_axis_async_fifo_adapter_8_64
optimization_advisor+static_analyzer
[ { "target_metric": "power" }, { "analysis_type": "full" } ]
[optimization_advisor {"target_metric": "power"}] { "status": "success", "target_metric": "power", "recommended_recipes": [ "synth -top test_axis_async_fifo_adapter_8_64", "opt; share; opt", "abc -g gates -liberty stdcells.lib", "opt_clean; clockgate" ], "optimization_suggestions": [ { ...
multi_tool
optimization_advisor+static_analyzer
compositional
6d0045b0402d
[{"tool": "optimization_advisor", "parameters": {"target_metric": "power"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For the test_axis_async_fifo_adapter_8_64 module, how do its code structure and the power-oriented optimization suggestions relate, and what power improvement is estimated? [optimization_advisor {"target_metric": "power"}] { "status": "success", "target_metric": "power", "recommended_recipes": [ "s...
043ed290c699
7cacbc834dfe
train
glm-5.3
2
3,300
{ "repository": "https://github.com/alexforencich/verilog-ethernet", "commit": "77320a9471d19c7dd383914bc049e02d9f4f1ffb", "path": "lib/axis/tb/test_axis_async_fifo_adapter_8_64.v", "sha256": "ba54fff33b6656529a24fb13a19a728197c31eab7fef7c97e16889e7dd062b27" }
For the system_top module, how does its structural complexity from the AIG graph analysis compare with the potential gains from the suggested power optimization, and what trade-offs should I consider?
The AIG analysis of system_top shows 27 nodes and 337 edges with an average degree of 12.48, dominated by one system_wrapper and a mix of buffers like 2 IBUFDS, 1 IBUFDS_GTE4, 1 BUFG, and 1 OBUFDS. The power-focused optimization (including clock gating via 'clockgate') estimates a power improvement of -25.0 with area a...
github_repos/analogdevicesinc_hdl/projects/ad9083_evb/zcu102/system_top.v
system_top
graph_extractor+optimization_advisor
[ { "graph_type": "AIG" }, { "target_metric": "power" } ]
[graph_extractor {"graph_type": "AIG"}] { "status": "success", "graph_type": "AIG", ...[21954 chars elided]... "node_count": 27, "edge_count": 337, "graph_properties": { "node_types": { "BUFG": 1, "IBUFDS": 2, "IBUFDS_GTE4": 1, "ad_iobuf": 1, "OBUFDS": 1, "ad_3w_spi": 1...
multi_tool
graph_extractor+optimization_advisor
compositional
51543921cb58
[{"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "power"}}]
Question: For the system_top module, how does its structural complexity from the AIG graph analysis compare with the potential gains from the suggested power optimization, and what trade-offs should I consider? [graph_extractor {"graph_type": "AIG"}] { "status": "success", "graph_type": "AIG", ...[21954 chars elid...
4f3924707719
7c8de8d576ed
train
glm-5.3
2
3,300
{ "repository": "https://github.com/analogdevicesinc/hdl", "commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f", "path": "projects/ad9083_evb/zcu102/system_top.v", "sha256": "812a0091e17e7f1e025d1fe99e20bd9cbd6065b5013da60738c68f3399d8b524" }
For the oh_bin2gray module, is it worth applying the aggressive resource-sharing optimization, given how small and simple the module is according to its complexity metrics?
oh_bin2gray is very small and simple (9 lines of code, cyclomatic complexity 1, 0 always blocks, 1 assign statement, 28 operators), so aggressive sharing mainly targets arithmetic operator reuse. The estimated improvement is -15.0 in area and -10.0 in power, but at the cost of a 5.0 increase in delay and higher routing...
github_repos/aolofsson_oh/stdlib/rtl/oh_bin2gray.v
oh_bin2gray
optimization_advisor+static_analyzer
[ { "target_metric": "area" }, { "analysis_type": "full" } ]
[optimization_advisor {"target_metric": "area"}] { "status": "success", "target_metric": "area", "recommended_recipes": [ "synth -top oh_bin2gray -flatten", "opt -full; share -aggressive; opt", "abc -g gates -liberty stdcells.lib", "opt_clean -purge" ], "optimization_suggestions": [ { ...
multi_tool
optimization_advisor+static_analyzer
compositional
38aa0ae7386d
[{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For the oh_bin2gray module, is it worth applying the aggressive resource-sharing optimization, given how small and simple the module is according to its complexity metrics? [optimization_advisor {"target_metric": "area"}] { "status": "success", "target_metric": "area", "recommended_recipes": [ "syn...
ebfb44a012a8
7d12cca2915f
train
glm-5.3
2
3,300
{ "repository": "https://github.com/aolofsson/oh", "commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067", "path": "stdlib/rtl/oh_bin2gray.v", "sha256": "26fc4516ad541ed68d43772a9a0d08981a569d6424603adca50f7fbb434a8a36" }
For the axi_fan_control module, is applying the delay-focused optimization advice worth it given the module's size and complexity, and what lint issues should I fix first?
For axi_fan_control, the delay optimization is estimated to reduce delay by -20.0% at the cost of about 10.0% more area and 5.0% higher power, so it is a reasonable trade-off if timing is critical on this already large design of 635 lines of code with cyclomatic complexity 121. Since the static analysis reports zero li...
github_repos/analogdevicesinc_hdl/library/axi_fan_control/axi_fan_control.v
axi_fan_control
optimization_advisor+static_analyzer
[ { "target_metric": "delay" }, { "analysis_type": "full" } ]
[optimization_advisor {"target_metric": "delay"}] { "status": "success", "target_metric": "delay", "recommended_recipes": [ "synth -top axi_fan_control", "opt -fast", "abc -fast -liberty stdcells.lib", "opt_clean" ], "optimization_suggestions": [ { "type": "pipeline_insertion", ...
multi_tool
optimization_advisor+static_analyzer
compositional
418d132b88dd
[{"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For the axi_fan_control module, is applying the delay-focused optimization advice worth it given the module's size and complexity, and what lint issues should I fix first? [optimization_advisor {"target_metric": "delay"}] { "status": "success", "target_metric": "delay", "recommended_recipes": [ "sy...
3e4f63986456
7d3b066b8b57
train
glm-5.3
2
3,300
{ "repository": "https://github.com/analogdevicesinc/hdl", "commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f", "path": "library/axi_fan_control/axi_fan_control.v", "sha256": "d7e54f725517c2d5e64436ef62277a32c254dc4fbee1b1113d0d72d6f3cd48a7" }
For the axi_ad9625_channel module, the delay-focused optimization suggests a delay reduction alongside area and power changes, and the structural analysis reports its size and complexity; can you summarize whether applying the delay optimization is worthwhile given the module's structure, including the relevant figures...
The delay optimization for axi_ad9625_channel is estimated to improve delay by -20.0 at the cost of 10.0 area increase and 5.0 power increase, consistent with the trade-offs of higher area and power consumption. Structurally the module is fairly simple, with 106 lines of code, cyclomatic complexity of 2, nesting depth ...
github_repos/analogdevicesinc_hdl/library/axi_ad9625/axi_ad9625_channel.v
axi_ad9625_channel
optimization_advisor+static_analyzer
[ { "target_metric": "delay" }, { "analysis_type": "full" } ]
[optimization_advisor {"target_metric": "delay"}] { "status": "success", "target_metric": "delay", "recommended_recipes": [ "synth -top axi_ad9625_channel", "opt -fast", "abc -fast -liberty stdcells.lib", "opt_clean" ], "optimization_suggestions": [ { "type": "pipeline_insertion", ...
multi_tool
optimization_advisor+static_analyzer
compositional
e73abd2bc113
[{"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For the axi_ad9625_channel module, the delay-focused optimization suggests a delay reduction alongside area and power changes, and the structural analysis reports its size and complexity; can you summarize whether applying the delay optimization is worthwhile given the module's structure, including the releva...
c6580c47b41c
7d63de1b773f
train
glm-5.3
2
3,300
{ "repository": "https://github.com/analogdevicesinc/hdl", "commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f", "path": "library/axi_ad9625/axi_ad9625_channel.v", "sha256": "8a7f0e241408f209b5db1546825f49713f713eb83c7bf4de8194a4cf2c7ed0e5" }
For the module axi_ad9625_channel, how well does the RTL source line up with the netlist, and does that seem reasonable given its structure — please mention the signal mapping, the module size, and its lint status.
The RTL-to-netlist mapping for axi_ad9625_channel is perfect: 20 RTL signals all mapped (alignment score 100.0, 0 unmapped) out of 25 netlist wires. This is consistent with a small, purely structural module — 106 lines of code, cyclomatic complexity 2, 15 total ports, and no always blocks — that simply wires up instant...
github_repos/analogdevicesinc_hdl/library/axi_ad9625/axi_ad9625_channel.v
axi_ad9625_channel
cross_stage_mapper+static_analyzer
[ {}, { "analysis_type": "full" } ]
[cross_stage_mapper {}] { "status": "success", "rtl_to_netlist_mapping": { "up_adc_pn_err": [ "up_adc_pn_err" ], "up_rstn": [ "up_rstn" ], "up_rack": [ "up_rack" ], "up_wack": [ "up_wack" ], "adc_dfmt_type_s": [ "adc_dfmt_type_s" ], "up_wreq"...
multi_tool
cross_stage_mapper+static_analyzer
compositional
5c112efaaf38
[{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For the module axi_ad9625_channel, how well does the RTL source line up with the netlist, and does that seem reasonable given its structure — please mention the signal mapping, the module size, and its lint status. [cross_stage_mapper {}] { "status": "success", "rtl_to_netlist_mapping": { "up_adc_pn_...
bd2ac7cea48c
7d63de1b773f
train
glm-5.3
2
3,300
{ "repository": "https://github.com/analogdevicesinc/hdl", "commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f", "path": "library/axi_ad9625/axi_ad9625_channel.v", "sha256": "8a7f0e241408f209b5db1546825f49713f713eb83c7bf4de8194a4cf2c7ed0e5" }
For axi_fan_control, given its DFG structure and the power optimization analysis, is applying the suggested power optimizations worthwhile despite the added complexity?
The DFG for axi_fan_control is large and dense (333 nodes, 9022 edges, avg_degree 27.09, including 38 $sdffe and 10 $sdff registers and 9 $add nodes), so clock gating those registers and isolating arithmetic operands is applicable. The estimated improvement is power at -25.0 with area and delay each at 5.0, so the powe...
github_repos/analogdevicesinc_hdl/library/axi_fan_control/axi_fan_control.v
axi_fan_control
graph_extractor+optimization_advisor
[ { "graph_type": "DFG" }, { "target_metric": "power" } ]
[graph_extractor {"graph_type": "DFG"}] { "status": "success", "graph_type": "DFG", ...[66177 chars elided]... "node_count": 333, "edge_count": 9022, "graph_properties": { "node_types": { "$and": 8, "$not": 8, "$eq": 68, "$logic_and": 39, "$mux": 42, "$logic_not": 6, ...
multi_tool
graph_extractor+optimization_advisor
compositional
7aa92fdcb3e4
[{"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "power"}}]
Question: For axi_fan_control, given its DFG structure and the power optimization analysis, is applying the suggested power optimizations worthwhile despite the added complexity? [graph_extractor {"graph_type": "DFG"}] { "status": "success", "graph_type": "DFG", ...[66177 chars elided]... "node_count": 333, "e...
e6ffa2be31b7
7d3b066b8b57
train
glm-5.3
2
3,300
{ "repository": "https://github.com/analogdevicesinc/hdl", "commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f", "path": "library/axi_fan_control/axi_fan_control.v", "sha256": "d7e54f725517c2d5e64436ef62277a32c254dc4fbee1b1113d0d72d6f3cd48a7" }
For the test_axis_cobs_decode module, is it worth applying the delay optimization given how simple the module is, and what are the estimated costs?
test_axis_cobs_decode is a simple wrapper with cyclomatic complexity 2, nesting depth 1, 73 lines of code, and instantiates axis_cobs_decode, so aggressive optimization is likely unnecessary. Still, the delay-targeted optimization is estimated to reduce delay by -20.0 percent at the cost of about 10.0 percent more area...
github_repos/corundum_corundum/fpga/lib/eth/lib/axis/tb/test_axis_cobs_decode.v
test_axis_cobs_decode
optimization_advisor+static_analyzer
[ { "target_metric": "delay" }, { "analysis_type": "full" } ]
[optimization_advisor {"target_metric": "delay"}] { "status": "success", "target_metric": "delay", "recommended_recipes": [ "synth -top test_axis_cobs_decode", "opt -fast", "abc -fast -liberty stdcells.lib", "opt_clean" ], "optimization_suggestions": [ { "type": "pipeline_insertion",...
multi_tool
optimization_advisor+static_analyzer
compositional
3661907a099d
[{"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For the test_axis_cobs_decode module, is it worth applying the delay optimization given how simple the module is, and what are the estimated costs? [optimization_advisor {"target_metric": "delay"}] { "status": "success", "target_metric": "delay", "recommended_recipes": [ "synth -top test_axis_cobs_...
d0bd9cd1c531
7d77008fa46f
train
glm-5.3
2
3,300
{ "repository": "https://github.com/corundum/corundum", "commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce", "path": "fpga/lib/eth/lib/axis/tb/test_axis_cobs_decode.v", "sha256": "d881dd11679bc5d73b6dd1001450372800a32c3690c53901595e392a98dea534" }
For the altera_avalon_st_clock_crosser module, based on its DFG structure, the synthesized results, and the area-focused optimization recommendations, how do the current gate-level statistics and the proposed area optimizations trade off against delay?
The altera_avalon_st_clock_crosser currently synthesizes to 28 gates with an area of 28.5, a delay of 132.96, and power of 0.028, and its DFG has 25 nodes and 97 edges with an average degree of 3.88, including 10 $_DFFE_PP0P_ and 8 $_DFF_PP0_ flip-flops. The area optimization recipes (e.g., resource sharing with share ...
github_repos/pConst_basic_verilog/example_projects/quartus_test_prj_template_v4/ip/jtag_io/synthesis/submodules/altera_avalon_st_clock_crosser.v
altera_avalon_st_clock_crosser
graph_extractor+optimization_advisor+synthesis_tool
[ { "graph_type": "DFG" }, { "target_metric": "area" }, { "optimization_level": "medium" } ]
[graph_extractor {"graph_type": "DFG"}] { "status": "success", "graph_type": "DFG", ...[16103 chars elided]... "node_count": 25, "edge_count": 97, "graph_properties": { "node_types": { "$not": 4, "$xor": 2, "$and": 2, "$adffe": 3, "$adff": 1, "altera_avalon_st_pipeline_...
multi_tool
graph_extractor+optimization_advisor+synthesis_tool
compositional
df5556c5e095
[{"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}]
Question: For the altera_avalon_st_clock_crosser module, based on its DFG structure, the synthesized results, and the area-focused optimization recommendations, how do the current gate-level statistics and the proposed area optimizations trade off against delay? [graph_extractor {"graph_type": "DFG"}] { "status": "s...
55219ab902f8
7d24c6d98858
train
glm-5.3
3
3,300
{ "repository": "https://github.com/pConst/basic_verilog", "commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614", "path": "example_projects/quartus_test_prj_template_v4/ip/jtag_io/synthesis/submodules/altera_avalon_st_clock_crosser.v", "sha256": "8aacb793aa81947b6c7ea29693aba6d44f7a739aacea450f561db95cd9c3c436" ...
For ad_mux_core, how does the RTL structure (complexity, operator count, always blocks, assign statements) relate to the netlist after synthesis, and is the RTL-to-netlist mapping complete?
The RTL for ad_mux_core is small but dense, with 24 lines of code, cyclomatic complexity 3, nesting depth 3, and 405 operators across 1 always block and 3 assign statements, while the netlist contains 480 wires and no cells. The RTL-to-netlist mapping is fully aligned with an alignment score of 100.0, mapping the 1 RTL...
github_repos/analogdevicesinc_hdl/library/common/ad_mux_core.v
ad_mux_core
cross_stage_mapper+static_analyzer
[ {}, { "analysis_type": "full" } ]
[cross_stage_mapper {}] { "status": "success", "rtl_to_netlist_mapping": { "clk": [ "clk" ] }, "alignment_score": 100.0, "unmapped_elements": [], "mapping_statistics": { "rtl_signals": 1, "netlist_wires": 480, "netlist_cells": 0, "mapped_signals": 1, "unmapped_signals": 0 ...
multi_tool
cross_stage_mapper+static_analyzer
compositional
3577c8525bc6
[{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For ad_mux_core, how does the RTL structure (complexity, operator count, always blocks, assign statements) relate to the netlist after synthesis, and is the RTL-to-netlist mapping complete? [cross_stage_mapper {}] { "status": "success", "rtl_to_netlist_mapping": { "clk": [ "clk" ] }, "a...
b4c517f93682
7d92c4fa2c10
train
glm-5.3
2
3,300
{ "repository": "https://github.com/analogdevicesinc/hdl", "commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f", "path": "library/common/ad_mux_core.v", "sha256": "3bca634dc2cb009ff8072409b3b6f990baecf560af433612d8ca000cb5cf1d51" }
For the ct_f_spsram_2048x88 module, the RTL is fairly small (65 lines of code and cyclomatic complexity 5) — how does that compare to the hardware it produces after synthesis, in terms of cell count and area?
Although the RTL source for ct_f_spsram_2048x88 is compact, with 65 lines of code, cyclomatic complexity 5, and only 1 always block and 2 assign statements, medium-effort synthesis produces a much larger implementation of 221 gates with an area of 303.5, dominated by 88 fpga_ram cells, 88 $_ANDNOT_ cells, and 22 $_NAND...
github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/fpga/rtl/ct_f_spsram_2048x88.v
ct_f_spsram_2048x88
static_analyzer+synthesis_tool
[ { "analysis_type": "full" }, { "optimization_level": "medium" } ]
[static_analyzer {"analysis_type": "full"}] { "status": "success", "module_name": "ct_f_spsram_2048x88", "port_count": { "inputs": 3, "outputs": 0, "inouts": 0, "total": 3 }, "signal_count": { "wires": 3, "regs": 0, "parameters": 3, "total": 3 }, "always_blocks": 1, "assi...
multi_tool
static_analyzer+synthesis_tool
compositional
b39d36cb0f85
[{"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}]
Question: For the ct_f_spsram_2048x88 module, the RTL is fairly small (65 lines of code and cyclomatic complexity 5) — how does that compare to the hardware it produces after synthesis, in terms of cell count and area? [static_analyzer {"analysis_type": "full"}] { "status": "success", "module_name": "ct_f_spsram_2...
6b914f778d2c
7da1287e1c99
train
glm-5.3
2
3,300
{ "repository": "https://github.com/XUANTIE-RV/openc910", "commit": "b91c90914c19f114d35c8f6b73408eb241ed847c", "path": "C910_RTL_FACTORY/gen_rtl/fpga/rtl/ct_f_spsram_2048x88.v", "sha256": "68d1eb5754394a8ff066f3a22535f64e31dee17ff96979f95ad88aa36911c439" }
For the ct_fspu_ctrl module, which RTL signals failed to map into the netlist, and given the estimated power savings from applying the recommended clock-gating and operand-isolation optimizations, is that optimization worthwhile given the timing and area trade-offs?
In ct_fspu_ctrl, the signals ex3_pipedown and ex2_pipedown were unmapped, leaving 11 of 13 RTL signals mapped for an alignment score of 84.62. The power optimization is estimated to improve power by -25.0 while area and delay each grow by 5.0, so it is likely worthwhile despite the added area overhead and clock-gating ...
github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/vfalu/rtl/ct_fspu_ctrl.v
ct_fspu_ctrl
cross_stage_mapper+optimization_advisor
[ {}, { "target_metric": "power" } ]
[cross_stage_mapper {}] { "status": "success", "rtl_to_netlist_mapping": { "forever_cpuclk": [ "forever_cpuclk" ], "cp0_yy_clk_en": [ "cp0_yy_clk_en" ], "ex3_pipedown": [], "ex1_pipedown": [ "ex1_pipedown" ], "ex2_vld_clk": [ "ex2_vld_clk", "ex2_vld_clk_...
multi_tool
cross_stage_mapper+optimization_advisor
compositional
52fede3de6d1
[{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "power"}}]
Question: For the ct_fspu_ctrl module, which RTL signals failed to map into the netlist, and given the estimated power savings from applying the recommended clock-gating and operand-isolation optimizations, is that optimization worthwhile given the timing and area trade-offs? [cross_stage_mapper {}] { "status": "suc...
695e055c2410
7dbb93200cd3
train
glm-5.3
2
3,300
{ "repository": "https://github.com/XUANTIE-RV/openc910", "commit": "b91c90914c19f114d35c8f6b73408eb241ed847c", "path": "C910_RTL_FACTORY/gen_rtl/vfalu/rtl/ct_fspu_ctrl.v", "sha256": "fe5fc0f74a873c9de0ba76b1eacca92d980c11808b2b3d8bfd1d7ef56b6bb2b5" }
For ct_fspu_ctrl, how does the synthesized gate-level result compare with the structure shown in its AIG representation, and what are the key post-synthesis figures?
The AIG for ct_fspu_ctrl contains 35 nodes and 74 edges (average degree 2.11), including 8 AND nodes, 14 NOT nodes, 2 DFF_PN0_ cells, and 2 gated clock cells, while synthesis reduced this to only 6 gates (2 $_DFF_PN0_, 2 $_OR_, and 2 gated_clk_cell) with 13 wires and 15 wire bits. Post-synthesis the design achieves an ...
github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/vfalu/rtl/ct_fspu_ctrl.v
ct_fspu_ctrl
graph_extractor+synthesis_tool
[ { "graph_type": "AIG" }, { "optimization_level": "medium" } ]
[graph_extractor {"graph_type": "AIG"}] { "status": "success", "graph_type": "AIG", ...[11268 chars elided]... "node_count": 35, "edge_count": 74, "graph_properties": { "node_types": { "$_AND_": 8, "$_NOT_": 14, "$_DFF_PN0_": 2, "gated_clk_cell": 2, "port_input": 6, "po...
multi_tool
graph_extractor+synthesis_tool
compositional
315ae02a2869
[{"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}]
Question: For ct_fspu_ctrl, how does the synthesized gate-level result compare with the structure shown in its AIG representation, and what are the key post-synthesis figures? [graph_extractor {"graph_type": "AIG"}] { "status": "success", "graph_type": "AIG", ...[11268 chars elided]... "node_count": 35, "edge_...
7d044a1941b3
7dbb93200cd3
train
glm-5.3
2
3,300
{ "repository": "https://github.com/XUANTIE-RV/openc910", "commit": "b91c90914c19f114d35c8f6b73408eb241ed847c", "path": "C910_RTL_FACTORY/gen_rtl/vfalu/rtl/ct_fspu_ctrl.v", "sha256": "fe5fc0f74a873c9de0ba76b1eacca92d980c11808b2b3d8bfd1d7ef56b6bb2b5" }
For the axil_reg_if module, is aggressive resource sharing for area worth it when you consider the current post-synthesis results and the fact that the design is purely combinational wire-based logic? Discuss the trade-offs including the delay impact.
The current synthesis of axil_reg_if is already tiny, with an area of 2.0, 2 gates (one axil_reg_if_rd and one axil_reg_if_wr), and a critical path of 61.56, and the static analysis confirms it has 0 always blocks, 22 wires, and 0 regs, so there is essentially no arithmetic logic to share. The area optimization advisor...
github_repos/corundum_corundum/fpga/lib/axi/rtl/axil_reg_if.v
axil_reg_if
optimization_advisor+static_analyzer+synthesis_tool
[ { "target_metric": "area" }, { "analysis_type": "full" }, { "optimization_level": "medium" } ]
[optimization_advisor {"target_metric": "area"}] { "status": "success", "target_metric": "area", "recommended_recipes": [ "synth -top axil_reg_if -flatten", "opt -full; share -aggressive; opt", "abc -g gates -liberty stdcells.lib", "opt_clean -purge" ], "optimization_suggestions": [ { ...
multi_tool
optimization_advisor+static_analyzer+synthesis_tool
compositional
6840381d7dc4
[{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}]
Question: For the axil_reg_if module, is aggressive resource sharing for area worth it when you consider the current post-synthesis results and the fact that the design is purely combinational wire-based logic? Discuss the trade-offs including the delay impact. [optimization_advisor {"target_metric": "area"}] { "sta...
d61c3cb01dd0
7dd2897fee33
train
glm-5.3
3
3,300
{ "repository": "https://github.com/corundum/corundum", "commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce", "path": "fpga/lib/axi/rtl/axil_reg_if.v", "sha256": "6aac73057466d4c16f79a5575f5fb4136b494d41cd63aaa83fefe90319006a39" }
For the mask_32 module, the source is quite complex, so how does that complexity compare to what actually gets synthesized, and what are the resulting area, delay, and power figures?
The mask_32 source has 165 lines of code, cyclomatic complexity 13, nesting depth 8, and 261 operators across 4 always blocks, yet synthesis reduces this to just 2 gates ($meminit and $memrd_v2) implementing one 1024-bit memory, giving an area of 2.0, a delay and critical path of 61.56, and power of 0.002.
github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/translation/mask_32.v
mask_32
static_analyzer+synthesis_tool
[ { "analysis_type": "full" }, { "optimization_level": "medium" } ]
[static_analyzer {"analysis_type": "full"}] { "status": "success", "module_name": "mask_32", "port_count": { "inputs": 1, "outputs": 1, "inouts": 0, "total": 2 }, "signal_count": { "wires": 0, "regs": 1, "parameters": 2, "total": 1 }, "always_blocks": 4, "assign_statement...
multi_tool
static_analyzer+synthesis_tool
compositional
362c2ae903d9
[{"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}]
Question: For the mask_32 module, the source is quite complex, so how does that complexity compare to what actually gets synthesized, and what are the resulting area, delay, and power figures? [static_analyzer {"analysis_type": "full"}] { "status": "success", "module_name": "mask_32", "port_count": { "inputs...
7ad4e7e85438
7deb4ddc0a97
train
glm-5.3
2
3,300
{ "repository": "https://github.com/pConst/basic_verilog", "commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614", "path": "Advanced Synthesis Cookbook/translation/mask_32.v", "sha256": "3850683a93401f75328cd37392a7a4ad8052b47d9dab45bf56e9f71468b6f747" }
For the axil_reg_if module, how complex is the AIG graph structure, and if I apply the suggested power optimizations, what improvement could I expect and what should I watch out for?
The AIG for axil_reg_if contains 34 nodes and 294 edges with an average degree of 8.65, including one axil_reg_if_rd and one axil_reg_if_wr instance plus 18 input and 14 output ports. The power-focused optimization is estimated to improve power by -25.0 with smaller 5.0 gains in area and delay, though clock gating adds...
github_repos/corundum_corundum/fpga/lib/axi/rtl/axil_reg_if.v
axil_reg_if
graph_extractor+optimization_advisor
[ { "graph_type": "AIG" }, { "target_metric": "power" } ]
[graph_extractor {"graph_type": "AIG"}] { "status": "success", "graph_type": "AIG", ...[27304 chars elided]... "node_count": 34, "edge_count": 294, "graph_properties": { "node_types": { "axil_reg_if_rd": 1, "axil_reg_if_wr": 1, "port_input": 18, "port_output": 14 }, "avg_de...
multi_tool
graph_extractor+optimization_advisor
compositional
f4bae2a70a2a
[{"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "power"}}]
Question: For the axil_reg_if module, how complex is the AIG graph structure, and if I apply the suggested power optimizations, what improvement could I expect and what should I watch out for? [graph_extractor {"graph_type": "AIG"}] { "status": "success", "graph_type": "AIG", ...[27304 chars elided]... "node_cou...
ba9c9e8abd6d
7dd2897fee33
train
glm-5.3
2
3,300
{ "repository": "https://github.com/corundum/corundum", "commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce", "path": "fpga/lib/axi/rtl/axil_reg_if.v", "sha256": "6aac73057466d4c16f79a5575f5fb4136b494d41cd63aaa83fefe90319006a39" }
For the sync_signal module, how does its structure in the AIG view relate to the area optimization opportunity, and what trade-offs should I expect if I apply the suggested sharing optimizations?
The AIG of sync_signal contains 5 nodes and 6 edges, including 2 positive-edge D flip-flops ($_DFF_P_) with 2 input ports and 1 output port. Applying the area-focused optimizations (e.g., resource sharing via 'share -aggressive') is estimated to improve area by -15.0 and power by -10.0, but at the cost of a 5.0 delay i...
github_repos/corundum_corundum/fpga/lib/pcie/example/ExaNIC_X25/fpga/rtl/sync_signal.v
sync_signal
graph_extractor+optimization_advisor
[ { "graph_type": "AIG" }, { "target_metric": "area" } ]
[graph_extractor {"graph_type": "AIG"}] { "status": "success", "graph_type": "AIG", ...[222 chars elided]... , "bits": [ 4 ] } ], "node_count": 5, "edge_count": 6, "graph_properties": { "node_types": { "$_DFF_P_": 2, "port_input": 2, "port_output": 1 }, ...
multi_tool
graph_extractor+optimization_advisor
compositional
65e4dcf41a6c
[{"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}]
Question: For the sync_signal module, how does its structure in the AIG view relate to the area optimization opportunity, and what trade-offs should I expect if I apply the suggested sharing optimizations? [graph_extractor {"graph_type": "AIG"}] { "status": "success", "graph_type": "AIG", ...[222 chars elided]... ...
9136588ef046
7e32e273e444
train
glm-5.3
2
3,300
{ "repository": "https://github.com/corundum/corundum", "commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce", "path": "fpga/lib/pcie/example/ExaNIC_X25/fpga/rtl/sync_signal.v", "sha256": "a89c005b14019c94f72fee6308e370044333742bec9494df1fbdd3096988f919" }
For mask_32, how does its structural complexity in the data-flow graph (DFG) compare with its source-level complexity, and does anything suggest a hidden bottleneck?
The DFG for mask_32 is extremely dense for its size, with only 4 nodes (one $memrd_v2, one $meminit, and one input and one output port) but 1097 edges, giving an average degree of 274.25. At the source level, the module looks fairly small and clean—165 lines of code across 190 total, a single input and single output po...
github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/translation/mask_32.v
mask_32
graph_extractor+static_analyzer
[ { "graph_type": "DFG" }, { "analysis_type": "full" } ]
[graph_extractor {"graph_type": "DFG"}] { "status": "success", "graph_type": "DFG", ...[20480 chars elided]... "node_count": 4, "edge_count": 1097, "graph_properties": { "node_types": { "$memrd_v2": 1, "$meminit": 1, "port_input": 1, "port_output": 1 }, "avg_degree": 274.25...
multi_tool
graph_extractor+static_analyzer
compositional
6aa89bcc0b89
[{"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For mask_32, how does its structural complexity in the data-flow graph (DFG) compare with its source-level complexity, and does anything suggest a hidden bottleneck? [graph_extractor {"graph_type": "DFG"}] { "status": "success", "graph_type": "DFG", ...[20480 chars elided]... "node_count": 4, "edge_c...
88f2cb7dc14c
7deb4ddc0a97
train
glm-5.3
2
3,300
{ "repository": "https://github.com/pConst/basic_verilog", "commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614", "path": "Advanced Synthesis Cookbook/translation/mask_32.v", "sha256": "3850683a93401f75328cd37392a7a4ad8052b47d9dab45bf56e9f71468b6f747" }
For the module ct_f_spsram_2048x88, how do the structure of its CDFG and the delay-focused optimization estimates affect whether it is worth applying the suggested delay optimizations?
The CDFG of ct_f_spsram_2048x88 has 363 nodes and 2085 edges, including 176 $and cells, 90 $logic_not cells, and 88 fpga_ram blocks with an average degree of 5.74, so it is dominated by memory and simple logic rather than arithmetic. Since the delay-oriented suggestions (register retiming and logic duplication to reduc...
github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/fpga/rtl/ct_f_spsram_2048x88.v
ct_f_spsram_2048x88
graph_extractor+optimization_advisor
[ { "graph_type": "CDFG" }, { "target_metric": "delay" } ]
[graph_extractor {"graph_type": "CDFG"}] { "status": "success", "graph_type": "CDFG", ...[66472 chars elided]... "node_count": 363, "edge_count": 2085, "graph_properties": { "node_types": { "$and": 176, "$logic_not": 90, "$dff": 1, "$mux": 1, "fpga_ram": 88, "port_input...
multi_tool
graph_extractor+optimization_advisor
compositional
b0b46d9b9780
[{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}]
Question: For the module ct_f_spsram_2048x88, how do the structure of its CDFG and the delay-focused optimization estimates affect whether it is worth applying the suggested delay optimizations? [graph_extractor {"graph_type": "CDFG"}] { "status": "success", "graph_type": "CDFG", ...[66472 chars elided]... "node...
4afebf6154ca
7da1287e1c99
train
glm-5.3
2
3,300
{ "repository": "https://github.com/XUANTIE-RV/openc910", "commit": "b91c90914c19f114d35c8f6b73408eb241ed847c", "path": "C910_RTL_FACTORY/gen_rtl/fpga/rtl/ct_f_spsram_2048x88.v", "sha256": "68d1eb5754394a8ff066f3a22535f64e31dee17ff96979f95ad88aa36911c439" }
For sync_signal, is applying the area-focused optimization flow worthwhile given its current size and complexity, and what trade-offs should I expect?
sync_signal is a small design with 47 lines of code, 6 total ports, cyclomatic complexity 2, and 1 always block, so the recommended recipes (flatten, opt -full with share -aggressive, abc -g gates) mainly offer resource sharing of arithmetic operators. The estimated improvement is -15.0 in area and -10.0 in power, but ...
github_repos/corundum_corundum/fpga/lib/pcie/example/ExaNIC_X25/fpga/rtl/sync_signal.v
sync_signal
optimization_advisor+static_analyzer
[ { "target_metric": "area" }, { "analysis_type": "full" } ]
[optimization_advisor {"target_metric": "area"}] { "status": "success", "target_metric": "area", "recommended_recipes": [ "synth -top sync_signal -flatten", "opt -full; share -aggressive; opt", "abc -g gates -liberty stdcells.lib", "opt_clean -purge" ], "optimization_suggestions": [ { ...
multi_tool
optimization_advisor+static_analyzer
compositional
d40306b0e084
[{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For sync_signal, is applying the area-focused optimization flow worthwhile given its current size and complexity, and what trade-offs should I expect? [optimization_advisor {"target_metric": "area"}] { "status": "success", "target_metric": "area", "recommended_recipes": [ "synth -top sync_signal -f...
67eb17d339e8
7e32e273e444
train
glm-5.3
2
3,300
{ "repository": "https://github.com/corundum/corundum", "commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce", "path": "fpga/lib/pcie/example/ExaNIC_X25/fpga/rtl/sync_signal.v", "sha256": "a89c005b14019c94f72fee6308e370044333742bec9494df1fbdd3096988f919" }
For the plic_32to1_arb module, how well did the RTL-to-netlist signal mapping turn out compared to the size of its DFG, and which signals could not be mapped?
The DFG for plic_32to1_arb has 447 nodes and 22648 edges, while only 7 of 9 RTL signals were mapped for an alignment score of 77.78, leaving int_req_secd_stg and definition unmapped.
github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/plic/rtl/plic_32to1_arb.v
plic_32to1_arb
cross_stage_mapper+graph_extractor
[ {}, { "graph_type": "DFG" } ]
[cross_stage_mapper {}] { "status": "success", "rtl_to_netlist_mapping": { "plicrst_b": [ "plicrst_b" ], "int_req_secd_stg": [], "round_int_req_secd_en": [ "round_int_req_secd_en" ], "ctrl_arb_new_arb_start": [ "ctrl_arb_new_arb_start" ], "data_in": [ "data_in...
multi_tool
cross_stage_mapper+graph_extractor
compositional
b2b99d71ab99
[{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}]
Question: For the plic_32to1_arb module, how well did the RTL-to-netlist signal mapping turn out compared to the size of its DFG, and which signals could not be mapped? [cross_stage_mapper {}] { "status": "success", "rtl_to_netlist_mapping": { "plicrst_b": [ "plicrst_b" ], "int_req_secd_stg": [],...
598aababf681
7eccd544ecb1
train
glm-5.3
2
3,300
{ "repository": "https://github.com/XUANTIE-RV/openc910", "commit": "b91c90914c19f114d35c8f6b73408eb241ed847c", "path": "C910_RTL_FACTORY/gen_rtl/plic/rtl/plic_32to1_arb.v", "sha256": "23f640a6f9ee83202c9532667f991aa72f087d812cd6185d56882536e2f02b81" }
For the oh_oai21 module, is its small code footprint and simple structure reflected in the synthesized implementation — what gates and delay/area figures do we get?
Yes: the code analysis shows oh_oai21 is trivially simple with 9 lines of code, cyclomatic complexity 1, a single assign statement, and 23 operators, which maps to a minimal netlist of just 2 gates (one $_NAND_ and one $_OR_) with area 2.0, power 0.002, and a critical path delay of 55.4.
github_repos/aolofsson_oh/stdlib/rtl/oh_oai21.v
oh_oai21
static_analyzer+synthesis_tool
[ { "analysis_type": "full" }, { "optimization_level": "medium" } ]
[static_analyzer {"analysis_type": "full"}] { "status": "success", "module_name": "oh_oai21", "port_count": { "inputs": 0, "outputs": 0, "inouts": 0, "total": 0 }, "signal_count": { "wires": 0, "regs": 0, "parameters": 1, "total": 0 }, "always_blocks": 0, "assign_statemen...
multi_tool
static_analyzer+synthesis_tool
compositional
5362dd2344c8
[{"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}]
Question: For the oh_oai21 module, is its small code footprint and simple structure reflected in the synthesized implementation — what gates and delay/area figures do we get? [static_analyzer {"analysis_type": "full"}] { "status": "success", "module_name": "oh_oai21", "port_count": { "inputs": 0, "output...
d10ab298b7a5
7f12e007c601
train
glm-5.3
2
3,300
{ "repository": "https://github.com/aolofsson/oh", "commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067", "path": "stdlib/rtl/oh_oai21.v", "sha256": "5bf54d2aec1fc15395ce257170e860fce8bab2870ec42d73d5d9a059b8b51a9f" }
For the axi_ad9684_channel module, is the area optimization recommended worth its cost? Summarize the module's structure and the estimated impacts, and note the key trade-off given its high operator count.
The axi_ad9684_channel module has 21 total ports (12 inputs, 9 outputs), 114 lines of code, and 413 operators, so aggressive resource sharing of arithmetic operators is recommended to share that logic. The estimated improvement is -15.0 for area and -10.0 for power, but delay increases by 5.0, with the trade-off that a...
github_repos/analogdevicesinc_hdl/library/axi_ad9684/axi_ad9684_channel.v
axi_ad9684_channel
optimization_advisor+static_analyzer
[ { "target_metric": "area" }, { "analysis_type": "full" } ]
[optimization_advisor {"target_metric": "area"}] { "status": "success", "target_metric": "area", "recommended_recipes": [ "synth -top axi_ad9684_channel -flatten", "opt -full; share -aggressive; opt", "abc -g gates -liberty stdcells.lib", "opt_clean -purge" ], "optimization_suggestions": [ ...
multi_tool
optimization_advisor+static_analyzer
compositional
fb55a680286a
[{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For the axi_ad9684_channel module, is the area optimization recommended worth its cost? Summarize the module's structure and the estimated impacts, and note the key trade-off given its high operator count. [optimization_advisor {"target_metric": "area"}] { "status": "success", "target_metric": "area", ...
107cf5962049
7e6f418dbed3
train
glm-5.3
2
3,300
{ "repository": "https://github.com/analogdevicesinc/hdl", "commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f", "path": "library/axi_ad9684/axi_ad9684_channel.v", "sha256": "da8e088ccc3271aa978c578dbc6ed3d279a424a99a246a673bb768076c2fe458" }
For the module plic_32to1_arb, how does its structural complexity in the CDFG compare with its source-level complexity, and do these figures seem consistent with its port and logic structure?
The CDFG of plic_32to1_arb contains 447 nodes and 22648 edges with an average degree of 50.67, dominated by logic such as 93 $eq, 96 $and, and 93 $or nodes plus 8 plic_granu2_arb submodules, while the source shows 226 lines of code, cyclomatic complexity 23, nesting depth 15, and 881 operators across 7 total ports (5 i...
github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/plic/rtl/plic_32to1_arb.v
plic_32to1_arb
graph_extractor+static_analyzer
[ { "graph_type": "CDFG" }, { "analysis_type": "full" } ]
[graph_extractor {"graph_type": "CDFG"}] { "status": "success", "graph_type": "CDFG", ...[67867 chars elided]... "node_count": 447, "edge_count": 22648, "graph_properties": { "node_types": { "$logic_not": 3, "$eq": 93, "$and": 96, "$or": 93, "port_input": 12, "port_outp...
multi_tool
graph_extractor+static_analyzer
compositional
59e6d03cdd91
[{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For the module plic_32to1_arb, how does its structural complexity in the CDFG compare with its source-level complexity, and do these figures seem consistent with its port and logic structure? [graph_extractor {"graph_type": "CDFG"}] { "status": "success", "graph_type": "CDFG", ...[67867 chars elided]... ...
35d0b069d542
7eccd544ecb1
train
glm-5.3
2
3,300
{ "repository": "https://github.com/XUANTIE-RV/openc910", "commit": "b91c90914c19f114d35c8f6b73408eb241ed847c", "path": "C910_RTL_FACTORY/gen_rtl/plic/rtl/plic_32to1_arb.v", "sha256": "23f640a6f9ee83202c9532667f991aa72f087d812cd6185d56882536e2f02b81" }
For the module ct_ciu_vb_aw_entry, compare its CDFG structure with its post-synthesis gate-level results: what does the mix of operations in the CDFG suggest, and how is that reflected in the synthesized cell breakdown, area, and critical path?
The CDFG of ct_ciu_vb_aw_entry contains 63 nodes (including 6 $or, 4 $and, 3 $eq, 3 $logic_and, 6 $adffe, 3 $reduce_bool, 5 $mux, and 2 gated_clk_cell nodes) across 12583 edges, indicating a register-heavy control block with clock gating. After synthesis this maps to 4411 gates dominated by 2676 $_NAND_ and 1079 $_AND_...
github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/ciu/rtl/ct_ciu_vb_aw_entry.v
ct_ciu_vb_aw_entry
graph_extractor+synthesis_tool
[ { "graph_type": "CDFG" }, { "optimization_level": "medium" } ]
[graph_extractor {"graph_type": "CDFG"}] { "status": "success", "graph_type": "CDFG", ...[75540 chars elided]... "node_count": 63, "edge_count": 12583, "graph_properties": { "node_types": { "$or": 6, "$and": 4, "$eq": 3, "$logic_and": 3, "$adffe": 6, "$reduce_bool": 3, ...
multi_tool
graph_extractor+synthesis_tool
compositional
f3a58120a543
[{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}]
Question: For the module ct_ciu_vb_aw_entry, compare its CDFG structure with its post-synthesis gate-level results: what does the mix of operations in the CDFG suggest, and how is that reflected in the synthesized cell breakdown, area, and critical path? [graph_extractor {"graph_type": "CDFG"}] { "status": "success"...
1c5941ed9819
7f42ef28d470
train
glm-5.3
2
3,300
{ "repository": "https://github.com/XUANTIE-RV/openc910", "commit": "b91c90914c19f114d35c8f6b73408eb241ed847c", "path": "C910_RTL_FACTORY/gen_rtl/ciu/rtl/ct_ciu_vb_aw_entry.v", "sha256": "2e41d64a433dc733d16da5e9cb1d85da6ca3aae77e87b9c2f1ba38f635ac28f7" }
For ram_block, how does its structural complexity from the CDFG compare with its code-level complexity, and does it contain any hand-written logic like always blocks or lint issues I should worry about?
The CDFG of ram_block has 7 nodes and 138 edges with an average degree of 19.71, dominated by a single altsyncram instance, which matches the code-level view of 62 lines of code, cyclomatic complexity 2, nesting depth 0, and 151 operators with zero always blocks and zero assign statements. The static analysis reports n...
github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/storage/ram_block.v
ram_block
graph_extractor+static_analyzer
[ { "graph_type": "CDFG" }, { "analysis_type": "full" } ]
[graph_extractor {"graph_type": "CDFG"}] { "status": "success", "graph_type": "CDFG", ...[15183 chars elided]... "node_count": 7, "edge_count": 138, "graph_properties": { "node_types": { "altsyncram": 1, "port_input": 5, "port_output": 1 }, "avg_degree": 19.71, "module_name":...
multi_tool
graph_extractor+static_analyzer
compositional
6f4e75f5f4bc
[{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For ram_block, how does its structural complexity from the CDFG compare with its code-level complexity, and does it contain any hand-written logic like always blocks or lint issues I should worry about? [graph_extractor {"graph_type": "CDFG"}] { "status": "success", "graph_type": "CDFG", ...[15183 chars ...
2b8c2f7df0ba
7f7f6e8e2ede
train
glm-5.3
2
3,300
{ "repository": "https://github.com/pConst/basic_verilog", "commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614", "path": "Advanced Synthesis Cookbook/storage/ram_block.v", "sha256": "3be24b32024d84c9742209ab951d119f4b5e3e43d16d3517c9ebdb1123656ab4" }
For ct_ciu_vb_aw_entry, the DFG analysis shows gated_clk_cell nodes and the RTL-to-netlist mapping is nearly complete — how would you weigh the power optimization opportunity here, and are there signals that could complicate it?
The DFG of ct_ciu_vb_aw_entry already contains 2 gated_clk_cell nodes, so clock gating is partially in place, and the power optimization advisor estimates a -25.0 power improvement with suggested clock gating and operand isolation, though it warns of area overhead and timing complexity. The mapping shows 30 of 31 RTL s...
github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/ciu/rtl/ct_ciu_vb_aw_entry.v
ct_ciu_vb_aw_entry
cross_stage_mapper+graph_extractor+optimization_advisor
[ {}, { "graph_type": "DFG" }, { "target_metric": "power" } ]
[cross_stage_mapper {}] { "status": "success", "rtl_to_netlist_mapping": { "vb_aw_vld": [ "vb_aw_vld_x" ], "vb_aw_req_sel_x": [ "vb_aw_req_sel_x" ], "ciu_icg_en": [ "ciu_icg_en" ], "l2c1_wvalid_x": [ "l2c1_wvalid_x" ], "vb_w_create_bus": [ ...[1044 ...
multi_tool
cross_stage_mapper+graph_extractor+optimization_advisor
compositional
4b550487676e
[{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "power"}}]
Question: For ct_ciu_vb_aw_entry, the DFG analysis shows gated_clk_cell nodes and the RTL-to-netlist mapping is nearly complete — how would you weigh the power optimization opportunity here, and are there signals that could complicate it? [cross_stage_mapper {}] { "status": "success", "rtl_to_netlist_mapping": { ...
1cda1fa261b2
7f42ef28d470
train
glm-5.3
3
3,300
{ "repository": "https://github.com/XUANTIE-RV/openc910", "commit": "b91c90914c19f114d35c8f6b73408eb241ed847c", "path": "C910_RTL_FACTORY/gen_rtl/ciu/rtl/ct_ciu_vb_aw_entry.v", "sha256": "2e41d64a433dc733d16da5e9cb1d85da6ca3aae77e87b9c2f1ba38f635ac28f7" }
For the axi_ad9122 module, how does the structure seen in its AIG relate to the synthesis results — specifically, do the submodule instances and port counts in the graph match the synthesized cell and port counts, and what are the resulting delay and power figures?
The AIG shows 42 nodes with 925 edges, comprising exactly one axi_ad9122_core, one axi_ad9122_if, and one up_axi instance plus 19 input and 20 output ports, which matches the synthesized netlist of 3 cells (axi_ad9122_core, axi_ad9122_if, up_axi) and 39 ports. Synthesis at medium optimization reports a critical-path de...
github_repos/analogdevicesinc_hdl/library/axi_ad9122/axi_ad9122.v
axi_ad9122
graph_extractor+synthesis_tool
[ { "graph_type": "AIG" }, { "optimization_level": "medium" } ]
[graph_extractor {"graph_type": "AIG"}] { "status": "success", "graph_type": "AIG", ...[26094 chars elided]... "node_count": 42, "edge_count": 925, "graph_properties": { "node_types": { "axi_ad9122_core": 1, "axi_ad9122_if": 1, "up_axi": 1, "port_input": 19, "port_output": 20...
multi_tool
graph_extractor+synthesis_tool
compositional
044777132056
[{"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}]
Question: For the axi_ad9122 module, how does the structure seen in its AIG relate to the synthesis results — specifically, do the submodule instances and port counts in the graph match the synthesized cell and port counts, and what are the resulting delay and power figures? [graph_extractor {"graph_type": "AIG"}] { ...
b86687fa1dc8
7fe28f158b3e
train
glm-5.3
2
3,300
{ "repository": "https://github.com/analogdevicesinc/hdl", "commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f", "path": "library/axi_ad9122/axi_ad9122.v", "sha256": "6a545b131706f064b8c2c7b7411cba46ae50a2b332451d2728e03b836a10f973" }
For the phy module, how consistent are the RTL-to-netlist signal mapping results with the synthesized netlist statistics, and what do they imply about the design's structure and cost at medium optimization effort?
The cross-stage mapping reports 35 mapped signals out of 36 RTL signals with an alignment score of 97.22 and only 'wire' unmapped, which matches the synthesized netlist's 35 wires (1892 wire bits) and 1 cell, an altera_xcvr_10gbaser primitive. This confirms phy is essentially a wrapper around that single transceiver ce...
github_repos/corundum_corundum/fpga/lib/eth/example/DE5-Net/fpga/cores/phy.v
phy
cross_stage_mapper+synthesis_tool
[ {}, { "optimization_level": "medium" } ]
[cross_stage_mapper {}] { "status": "success", "rtl_to_netlist_mapping": { "phy_mgmt_writedata": [ "phy_mgmt_writedata" ], "xgmii_rx_clk": [ "xgmii_rx_clk" ], "phy_mgmt_write": [ "phy_mgmt_writedata", "phy_mgmt_write" ], "rx_ready": [ "rx_ready" ], "...
multi_tool
cross_stage_mapper+synthesis_tool
compositional
046dff01bfac
[{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}]
Question: For the phy module, how consistent are the RTL-to-netlist signal mapping results with the synthesized netlist statistics, and what do they imply about the design's structure and cost at medium optimization effort? [cross_stage_mapper {}] { "status": "success", "rtl_to_netlist_mapping": { "phy_mgmt_wr...
c9367a2136cd
7fc995b2071a
train
glm-5.3
2
3,300
{ "repository": "https://github.com/corundum/corundum", "commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce", "path": "fpga/lib/eth/example/DE5-Net/fpga/cores/phy.v", "sha256": "7725db673c8ec470a2ed994343745a969aea39dc7859dc06245a768c602016d9" }
For the oh_xnor3 module, if I apply the recommended area-focused optimization flow, what synthesis results should I expect, and what are the trade-offs given the current delay and area figures?
oh_xnor3 currently synthesizes to an area of 4.0 with a delay of 98.49 using 2 gates (one $_XNOR_ and one $_XOR_) and 5 wires. Running the area-oriented optimization (including aggressive resource sharing) is estimated to reduce area by -15.0 and power by -10.0, but delay would increase by 5.0, and the aggressive shari...
github_repos/aolofsson_oh/stdlib/rtl/oh_xnor3.v
oh_xnor3
optimization_advisor+synthesis_tool
[ { "target_metric": "area" }, { "optimization_level": "medium" } ]
[optimization_advisor {"target_metric": "area"}] { "status": "success", "target_metric": "area", "recommended_recipes": [ "synth -top oh_xnor3 -flatten", "opt -full; share -aggressive; opt", "abc -g gates -liberty stdcells.lib", "opt_clean -purge" ], "optimization_suggestions": [ { "...
multi_tool
optimization_advisor+synthesis_tool
compositional
97fd88cf3511
[{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}]
Question: For the oh_xnor3 module, if I apply the recommended area-focused optimization flow, what synthesis results should I expect, and what are the trade-offs given the current delay and area figures? [optimization_advisor {"target_metric": "area"}] { "status": "success", "target_metric": "area", "recommended...
8b067885627a
8061933bb718
train
glm-5.3
2
3,300
{ "repository": "https://github.com/aolofsson/oh", "commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067", "path": "stdlib/rtl/oh_xnor3.v", "sha256": "c97e3e0bc432c9d33b3ea8f718842e566fffc5941b3ec6c9edb6b8dca95093da" }
For the oh_xnor3 module, how does its simple structure (single assign statement, cyclomatic complexity of 1) translate into synthesis results, and do the two views agree on the design size?
oh_xnor3 is a purely combinational cell with 1 assign statement, cyclomatic complexity 1, and no always blocks, and synthesis confirms this simplicity, mapping it to just 2 gates (one $_XNOR_ and one $_XOR_) with area 4.0, delay 98.49, and power 0.002. The static analysis reports 9 lines of code and 23 operators, consi...
github_repos/aolofsson_oh/stdlib/rtl/oh_xnor3.v
oh_xnor3
static_analyzer+synthesis_tool
[ { "analysis_type": "full" }, { "optimization_level": "medium" } ]
[static_analyzer {"analysis_type": "full"}] { "status": "success", "module_name": "oh_xnor3", "port_count": { "inputs": 0, "outputs": 0, "inouts": 0, "total": 0 }, "signal_count": { "wires": 0, "regs": 0, "parameters": 1, "total": 0 }, "always_blocks": 0, "assign_statemen...
multi_tool
static_analyzer+synthesis_tool
compositional
25455ed0bd09
[{"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}]
Question: For the oh_xnor3 module, how does its simple structure (single assign statement, cyclomatic complexity of 1) translate into synthesis results, and do the two views agree on the design size? [static_analyzer {"analysis_type": "full"}] { "status": "success", "module_name": "oh_xnor3", "port_count": { ...
5d9982359b39
8061933bb718
train
glm-5.3
2
3,300
{ "repository": "https://github.com/aolofsson/oh", "commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067", "path": "stdlib/rtl/oh_xnor3.v", "sha256": "c97e3e0bc432c9d33b3ea8f718842e566fffc5941b3ec6c9edb6b8dca95093da" }
For the module axi_hdmi_rx_tpm, how do the structural complexity results (ports, always blocks, operator count) compare with the synthesized cost in area, gates, and critical-path delay after medium-level optimization?
axi_hdmi_rx_tpm is structurally small — 5 total ports (4 inputs, 1 output), 1 always block, 6 assign statements, 435 operators across 38 lines of code — but it synthesizes to a fairly dense netlist of 276 gates with area 313.0 and a critical-path delay of 276.58, while drawing 0.276 power.
github_repos/analogdevicesinc_hdl/library/axi_hdmi_rx/axi_hdmi_rx_tpm.v
axi_hdmi_rx_tpm
static_analyzer+synthesis_tool
[ { "analysis_type": "full" }, { "optimization_level": "medium" } ]
[static_analyzer {"analysis_type": "full"}] { "status": "success", "module_name": "axi_hdmi_rx_tpm", "port_count": { "inputs": 4, "outputs": 1, "inouts": 0, "total": 5 }, "signal_count": { "wires": 4, "regs": 4, "parameters": 0, "total": 8 }, "always_blocks": 1, "assign_s...
multi_tool
static_analyzer+synthesis_tool
compositional
e32b6906c6b3
[{"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}]
Question: For the module axi_hdmi_rx_tpm, how do the structural complexity results (ports, always blocks, operator count) compare with the synthesized cost in area, gates, and critical-path delay after medium-level optimization? [static_analyzer {"analysis_type": "full"}] { "status": "success", "module_name": "axi...
fb0243aa9b00
80efd0112e6c
train
glm-5.3
2
3,300
{ "repository": "https://github.com/analogdevicesinc/hdl", "commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f", "path": "library/axi_hdmi_rx/axi_hdmi_rx_tpm.v", "sha256": "2257b482c5c8a84ed19bb03104ee67b67f784263502e89423a9466839d6ccaf4" }
For the axi_hdmi_rx_tpm module, how does the structure of its AIG relate to the RTL description and to the synthesized results, in terms of gate counts and flip-flops?
The RTL description of axi_hdmi_rx_tpm has only 38 lines of code with 1 always block and 6 assign statements, but its AIG representation contains 4412 nodes and 10745 edges, including 18 $_SDFFE_PP0P_ flip-flops and 1 $_DFFE_PP_ flip-flop. After synthesis, the design uses 276 gates with an area of 313.0, and the cell b...
github_repos/analogdevicesinc_hdl/library/axi_hdmi_rx/axi_hdmi_rx_tpm.v
axi_hdmi_rx_tpm
graph_extractor+static_analyzer+synthesis_tool
[ { "graph_type": "AIG" }, { "analysis_type": "full" }, { "optimization_level": "medium" } ]
[graph_extractor {"graph_type": "AIG"}] { "status": "success", "graph_type": "AIG", ...[33809 chars elided]... "node_count": 4412, "edge_count": 10745, "graph_properties": { "node_types": { "$_AND_": 1875, "$_NOT_": 2513, "$_SDFFE_PP0P_": 18, "$_DFFE_PP_": 1, "port_input": 4,...
multi_tool
graph_extractor+static_analyzer+synthesis_tool
compositional
9932c7781c68
[{"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}]
Question: For the axi_hdmi_rx_tpm module, how does the structure of its AIG relate to the RTL description and to the synthesized results, in terms of gate counts and flip-flops? [graph_extractor {"graph_type": "AIG"}] { "status": "success", "graph_type": "AIG", ...[33809 chars elided]... "node_count": 4412, "e...
727b95f8328a
80efd0112e6c
train
glm-5.3
3
3,300
{ "repository": "https://github.com/analogdevicesinc/hdl", "commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f", "path": "library/axi_hdmi_rx/axi_hdmi_rx_tpm.v", "sha256": "2257b482c5c8a84ed19bb03104ee67b67f784263502e89423a9466839d6ccaf4" }
For the oh_oa211 module, how does the structure shown in its CDFG compare with the static analysis of the source and the gate-level results after delay-oriented medium optimization? Give a short summary covering the graph, the code, and the area/delay/power figures.
The CDFG of oh_oa211 has 8 nodes and 9 edges (2 $and, 1 $or, 4 input ports, 1 output port, average degree 1.12), matching the source-level view of 1 assign statement with 23 operators across 10 lines of code and cyclomatic complexity 1. After medium-level optimization targeting delay, this maps to 3 gates (2 $_AND_ and...
github_repos/aolofsson_oh/stdlib/rtl/oh_oa211.v
oh_oa211
graph_extractor+static_analyzer+synthesis_tool
[ { "graph_type": "CDFG" }, { "analysis_type": "full" }, { "optimization_level": "medium" } ]
[graph_extractor {"graph_type": "CDFG"}] { "status": "success", "graph_type": "CDFG", ...[2219 chars elided]... "node_count": 8, "edge_count": 9, "graph_properties": { "node_types": { "$and": 2, "$or": 1, "port_input": 4, "port_output": 1 }, "avg_degree": 1.12, "module_...
multi_tool
graph_extractor+static_analyzer+synthesis_tool
compositional
1089f8472aa1
[{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}]
Question: For the oh_oa211 module, how does the structure shown in its CDFG compare with the static analysis of the source and the gate-level results after delay-oriented medium optimization? Give a short summary covering the graph, the code, and the area/delay/power figures. [graph_extractor {"graph_type": "CDFG"}] {...
488a78c363d6
80f07f222d8e
train
glm-5.3
3
3,300
{ "repository": "https://github.com/aolofsson/oh", "commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067", "path": "stdlib/rtl/oh_oa211.v", "sha256": "bede766d658b803f6d0604d150c58573642493488cbf62923ee3452be6c4d722" }
For the oh_dsync module, is applying the aggressive area-focused optimization flow worthwhile, considering what the optimization advisor estimates versus what the source-level analysis says about the module's size and complexity?
The area optimization flow for oh_dsync is estimated to reduce area by -15.0 and power by -10.0, but at the cost of a 5.0 increase in delay and higher routing complexity from aggressive sharing. Given that the module is quite small — 33 lines of code, 5 total ports (4 inputs, 1 output), 1 register, and cyclomatic compl...
github_repos/aolofsson_oh/stdlib/rtl/oh_dsync.v
oh_dsync
optimization_advisor+static_analyzer
[ { "target_metric": "area" }, { "analysis_type": "full" } ]
[optimization_advisor {"target_metric": "area"}] { "status": "success", "target_metric": "area", "recommended_recipes": [ "synth -top oh_dsync -flatten", "opt -full; share -aggressive; opt", "abc -g gates -liberty stdcells.lib", "opt_clean -purge" ], "optimization_suggestions": [ { "...
multi_tool
optimization_advisor+static_analyzer
compositional
6d465c8087a2
[{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For the oh_dsync module, is applying the aggressive area-focused optimization flow worthwhile, considering what the optimization advisor estimates versus what the source-level analysis says about the module's size and complexity? [optimization_advisor {"target_metric": "area"}] { "status": "success", "ta...
f5eec50b908d
811d09c97c5b
train
glm-5.3
2
3,300
{ "repository": "https://github.com/aolofsson/oh", "commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067", "path": "stdlib/rtl/oh_dsync.v", "sha256": "f226086230f687d8a403518c1780cd7c6a1e6d15522bb8da91635a0efd95a49d" }
For the axis_xgmii_rx_64 module, given the RTL-to-netlist cross-stage mapping results and the delay-focused optimization analysis, how well does the netlist align with the RTL, and what delay improvement could optimization buy at what cost?
The cross-stage mapping for axis_xgmii_rx_64 is weak, with only 16 of 34 RTL signals mapped, 18 unmapped, and an alignment score of 47.06 (the netlist has 3373 wires versus 34 RTL signals). The delay-targeted optimization estimates a delay improvement of -20.0, but at the cost of about 10.0 more area and 5.0 more power...
github_repos/corundum_corundum/fpga/lib/eth/rtl/axis_xgmii_rx_64.v
axis_xgmii_rx_64
cross_stage_mapper+optimization_advisor
[ {}, { "target_metric": "delay" } ]
[cross_stage_mapper {}] { "status": "success", "rtl_to_netlist_mapping": { "rst": [ "rst" ], "wire": [], "error_bad_fcs_reg": [], "m_axis_tvalid": [ "m_axis_tvalid", "m_axis_tvalid_next" ], "detect_term_save": [], "cfg_rx_enable": [ "cfg_rx_enable" ], ...
multi_tool
cross_stage_mapper+optimization_advisor
compositional
a426911c178f
[{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}]
Question: For the axis_xgmii_rx_64 module, given the RTL-to-netlist cross-stage mapping results and the delay-focused optimization analysis, how well does the netlist align with the RTL, and what delay improvement could optimization buy at what cost? [cross_stage_mapper {}] { "status": "success", "rtl_to_netlist_m...
b0ee2985e009
813b71dccacc
train
glm-5.3
2
3,300
{ "repository": "https://github.com/corundum/corundum", "commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce", "path": "fpga/lib/eth/rtl/axis_xgmii_rx_64.v", "sha256": "0c5e88eed6941360134d4fb5e456cfa205327191592f4d03f5e6fe9af914b7d5" }
For the oh_sdffsqn module, how much area and delay are currently reported after synthesis, and what trade-off should I expect if I apply the recommended area-focused optimizations?
Synthesis reports an area of 4.5 with a critical path delay of 75.79 for oh_sdffsqn. Applying the area optimization recipes is estimated to improve area by -15.0, but at the cost of delay, which is estimated to increase by 5.0.
github_repos/aolofsson_oh/stdlib/rtl/oh_sdffsqn.v
oh_sdffsqn
optimization_advisor+synthesis_tool
[ { "target_metric": "area" }, { "optimization_level": "medium" } ]
[optimization_advisor {"target_metric": "area"}] { "status": "success", "target_metric": "area", "recommended_recipes": [ "synth -top oh_sdffsqn -flatten", "opt -full; share -aggressive; opt", "abc -g gates -liberty stdcells.lib", "opt_clean -purge" ], "optimization_suggestions": [ { ...
multi_tool
optimization_advisor+synthesis_tool
compositional
b94f22457ea3
[{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}]
Question: For the oh_sdffsqn module, how much area and delay are currently reported after synthesis, and what trade-off should I expect if I apply the recommended area-focused optimizations? [optimization_advisor {"target_metric": "area"}] { "status": "success", "target_metric": "area", "recommended_recipes": [ ...
2f96c57d6f30
81ba406bbaa4
train
glm-5.3
2
3,300
{ "repository": "https://github.com/aolofsson/oh", "commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067", "path": "stdlib/rtl/oh_sdffsqn.v", "sha256": "60261bfe64b833fb015642a94d264b790c40a0b5fc4257f3ae18cfa56d789309" }
For ct_spsram_2048x32, how would applying the recommended area-optimization recipes affect the current synthesis results, considering the delay trade-off?
The current synthesis of ct_spsram_2048x32 reports an area of 1.0, a delay of 50.0 (critical path estimate 50.0), and power of 0.001 with a single ct_f_spsram_2048x32 cell and 7 wires (110 wire bits). Applying the area-focused recipes such as aggressive resource sharing is estimated to improve area by -15.0 and power b...
github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/lsu/rtl/ct_spsram_2048x32.v
ct_spsram_2048x32
optimization_advisor+synthesis_tool
[ { "target_metric": "area" }, { "optimization_level": "medium" } ]
[optimization_advisor {"target_metric": "area"}] { "status": "success", "target_metric": "area", "recommended_recipes": [ "synth -top ct_spsram_2048x32 -flatten", "opt -full; share -aggressive; opt", "abc -g gates -liberty stdcells.lib", "opt_clean -purge" ], "optimization_suggestions": [ ...
multi_tool
optimization_advisor+synthesis_tool
compositional
e0e401c4f89b
[{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}]
Question: For ct_spsram_2048x32, how would applying the recommended area-optimization recipes affect the current synthesis results, considering the delay trade-off? [optimization_advisor {"target_metric": "area"}] { "status": "success", "target_metric": "area", "recommended_recipes": [ "synth -top ct_spsram_...
2fbf1f6ee452
812aab5dad36
train
glm-5.3
2
3,300
{ "repository": "https://github.com/XUANTIE-RV/openc910", "commit": "b91c90914c19f114d35c8f6b73408eb241ed847c", "path": "C910_RTL_FACTORY/gen_rtl/lsu/rtl/ct_spsram_2048x32.v", "sha256": "d365d90fd1e44f45bfa6e19d02b9068fd4e085394b1eb0311fabe1fe345b532f" }
For the axis_xgmii_rx_64 module, how does its size and complexity in the source code compare with what it costs after synthesis, considering area, delay, and power?
The axis_xgmii_rx_64 module has 393 lines of code with a cyclomatic complexity of 40 and 15 total ports, and after synthesis it maps to 2046 gates occupying an area of 3258.5, with a delay of 600.3 and power of 2.046. So a fairly compact, moderately complex RTL description turns into roughly two thousand gates dominate...
github_repos/corundum_corundum/fpga/lib/eth/rtl/axis_xgmii_rx_64.v
axis_xgmii_rx_64
static_analyzer+synthesis_tool
[ { "analysis_type": "full" }, { "optimization_level": "medium" } ]
[static_analyzer {"analysis_type": "full"}] { "status": "success", "module_name": "axis_xgmii_rx_64", "port_count": { "inputs": 7, "outputs": 8, "inouts": 0, "total": 15 }, "signal_count": { "wires": 10, "regs": 22, "parameters": 8, "total": 32 }, "always_blocks": 4, "ass...
multi_tool
static_analyzer+synthesis_tool
compositional
90caf729fae8
[{"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}]
Question: For the axis_xgmii_rx_64 module, how does its size and complexity in the source code compare with what it costs after synthesis, considering area, delay, and power? [static_analyzer {"analysis_type": "full"}] { "status": "success", "module_name": "axis_xgmii_rx_64", "port_count": { "inputs": 7, ...
fb47756db88d
813b71dccacc
train
glm-5.3
2
3,300
{ "repository": "https://github.com/corundum/corundum", "commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce", "path": "fpga/lib/eth/rtl/axis_xgmii_rx_64.v", "sha256": "0c5e88eed6941360134d4fb5e456cfa205327191592f4d03f5e6fe9af914b7d5" }
For the mdio_master module, is applying the area-focused optimization advisable if timing margin matters? Combine the recommended area optimization flow with the current post-synthesis results (area 744.5, delay 370.86, 499 gates) and the structural complexity of the design when answering.
The mdio_master design currently synthesizes to 499 cells with area 744.5, delay 370.86, and power 0.499, dominated by 165 NAND gates and 50 $_DFFE_PP_ flip-flops. Applying the area optimization (aggressive resource sharing and mux optimization) is estimated to improve area by -15.0 and power by -10.0, but it is expect...
github_repos/corundum_corundum/fpga/lib/eth/example/VCU118/fpga_fmc_htg_6qsfp_25g/rtl/mdio_master.v
mdio_master
optimization_advisor+synthesis_tool
[ { "target_metric": "area" }, { "optimization_level": "medium" } ]
[optimization_advisor {"target_metric": "area"}] { "status": "success", "target_metric": "area", "recommended_recipes": [ "synth -top mdio_master -flatten", "opt -full; share -aggressive; opt", "abc -g gates -liberty stdcells.lib", "opt_clean -purge" ], "optimization_suggestions": [ { ...
multi_tool
optimization_advisor+synthesis_tool
compositional
f8941aa34643
[{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}]
Question: For the mdio_master module, is applying the area-focused optimization advisable if timing margin matters? Combine the recommended area optimization flow with the current post-synthesis results (area 744.5, delay 370.86, 499 gates) and the structural complexity of the design when answering. [optimization_advi...
a9bfe23f1b86
81cec866f359
train
glm-5.3
2
3,300
{ "repository": "https://github.com/corundum/corundum", "commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce", "path": "fpga/lib/eth/example/VCU118/fpga_fmc_htg_6qsfp_25g/rtl/mdio_master.v", "sha256": "63308070f3c1f13bb298f0e971ee5ff9fd161fe4070b5eddd85278f6dd043da3" }
For the mdio_master module, how well do the RTL signal names carry over to the synthesized netlist, and how does that mapping compare with the size of the synthesized design after delay-oriented optimization at medium effort?
The RTL-to-netlist mapping for mdio_master has an alignment score of 53.12, with 17 of 32 RTL signals mapped and 15 unmapped (like state_reg and busy_reg), while the optimized netlist contains 499 cells and 364 wires. The delay-optimized netlist achieves a delay of 370.86 with an area of 744.5 and power of 0.499, and i...
github_repos/corundum_corundum/fpga/lib/eth/example/VCU118/fpga_fmc_htg_6qsfp_25g/rtl/mdio_master.v
mdio_master
cross_stage_mapper+synthesis_tool
[ {}, { "optimization_level": "medium" } ]
[cross_stage_mapper {}] { "status": "success", "rtl_to_netlist_mapping": { "rst": [ "rst" ], "wire": [], "cmd_phy_addr": [ "cmd_phy_addr" ], "clk": [ "clk" ], "mdio_t": [ "mdio_t" ], "mdio_i_reg": [], "cmd_valid": [ "cmd_valid" ], "st...
multi_tool
cross_stage_mapper+synthesis_tool
compositional
771914905069
[{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}]
Question: For the mdio_master module, how well do the RTL signal names carry over to the synthesized netlist, and how does that mapping compare with the size of the synthesized design after delay-oriented optimization at medium effort? [cross_stage_mapper {}] { "status": "success", "rtl_to_netlist_mapping": { ...
ed90eaee092d
81cec866f359
train
glm-5.3
2
3,300
{ "repository": "https://github.com/corundum/corundum", "commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce", "path": "fpga/lib/eth/example/VCU118/fpga_fmc_htg_6qsfp_25g/rtl/mdio_master.v", "sha256": "63308070f3c1f13bb298f0e971ee5ff9fd161fe4070b5eddd85278f6dd043da3" }
For the ct_lsu_rot_data module, considering its structure and the available power optimization options, how many assign statements and always blocks does it have, and what power improvement could the suggested optimizations deliver at what cost?
ct_lsu_rot_data contains 10 assign statements and 1 always block, and the recommended power optimizations (clock gating and operand isolation) are estimated to improve power by -25.0, though they may add area overhead and timing complexity.
github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/lsu/rtl/ct_lsu_rot_data.v
ct_lsu_rot_data
optimization_advisor+static_analyzer
[ { "target_metric": "power" }, { "analysis_type": "full" } ]
[optimization_advisor {"target_metric": "power"}] { "status": "success", "target_metric": "power", "recommended_recipes": [ "synth -top ct_lsu_rot_data", "opt; share; opt", "abc -g gates -liberty stdcells.lib", "opt_clean; clockgate" ], "optimization_suggestions": [ { "type": "clock_...
multi_tool
optimization_advisor+static_analyzer
compositional
e1731d5943ff
[{"tool": "optimization_advisor", "parameters": {"target_metric": "power"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For the ct_lsu_rot_data module, considering its structure and the available power optimization options, how many assign statements and always blocks does it have, and what power improvement could the suggested optimizations deliver at what cost? [optimization_advisor {"target_metric": "power"}] { "status":...
3b1d66522652
81eaccb15663
train
glm-5.3
2
3,300
{ "repository": "https://github.com/XUANTIE-RV/openc910", "commit": "b91c90914c19f114d35c8f6b73408eb241ed847c", "path": "C910_RTL_FACTORY/gen_rtl/lsu/rtl/ct_lsu_rot_data.v", "sha256": "224fcd2abecb91c43c0d84a609e0d5560f48aff4a210ccfa17c31c76729c661f" }
For plic_ctrl, considering that synthesis after medium optimization for delay and power reports an area of 21.0 and a delay of 121.07, does the RTL-to-netlist cross-mapping look trustworthy enough for equivalence checking, and what synthesis figures support the design's compactness?
The mapping only has an alignment score of 69.57 with 32 mapped signals and 14 unmapped signals (including plic_ctrl_pready and plic_ctrl_reg_prdata), so it is only partially trustworthy. The synthesized design is small and fast: area 21.0, delay 121.07, power 0.021, gate_count 21, and wire_count 44, which supports the...
github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/plic/rtl/plic_ctrl.v
plic_ctrl
cross_stage_mapper+synthesis_tool
[ {}, { "optimization_level": "medium" } ]
[cross_stage_mapper {}] { "status": "success", "rtl_to_netlist_mapping": { "ctrl_xx_s_permission_nt": [ "ctrl_xx_s_permission_nt" ], "plic_amp": [ "plic_amp" ], "plic_s_permission_t_pre": [ "plic_s_permission_t_pre" ], "plic_ctrl_reg_sel_en": [ "plic_ctrl_reg_sel_...
multi_tool
cross_stage_mapper+synthesis_tool
compositional
1844f77ca951
[{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}]
Question: For plic_ctrl, considering that synthesis after medium optimization for delay and power reports an area of 21.0 and a delay of 121.07, does the RTL-to-netlist cross-mapping look trustworthy enough for equivalence checking, and what synthesis figures support the design's compactness? [cross_stage_mapper {}] {...
9bcc7005d451
820d8ef08627
train
glm-5.3
2
3,300
{ "repository": "https://github.com/XUANTIE-RV/openc910", "commit": "b91c90914c19f114d35c8f6b73408eb241ed847c", "path": "C910_RTL_FACTORY/gen_rtl/plic/rtl/plic_ctrl.v", "sha256": "173c0e1e02bc81310b762666c38ef9a227513e57fbb1e1f2f6fa5c31ea3c2730" }
For ct_spsram_512x52, how would you weigh running aggressive area optimization given the structure shown in its DFG, and what trade-offs should I expect?
The DFG shows ct_spsram_512x52 is a thin wrapper with 8 nodes (6 inputs, 1 output, 1 instance of ct_f_spsram_512x52) but 168 edges and an average degree of 21.0, so aggressive sharing-based area optimization offers only an estimated area improvement of -15.0 (and power -10.0) at the cost of a 5.0 delay increase. Given ...
github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/lsu/rtl/ct_spsram_512x52.v
ct_spsram_512x52
graph_extractor+optimization_advisor
[ { "graph_type": "DFG" }, { "target_metric": "area" } ]
[graph_extractor {"graph_type": "DFG"}] { "status": "success", "graph_type": "DFG", ...[17728 chars elided]... "node_count": 8, "edge_count": 168, "graph_properties": { "node_types": { "ct_f_spsram_512x52": 1, "port_input": 6, "port_output": 1 }, "avg_degree": 21.0, "module_n...
multi_tool
graph_extractor+optimization_advisor
compositional
c142ef243a51
[{"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}]
Question: For ct_spsram_512x52, how would you weigh running aggressive area optimization given the structure shown in its DFG, and what trade-offs should I expect? [graph_extractor {"graph_type": "DFG"}] { "status": "success", "graph_type": "DFG", ...[17728 chars elided]... "node_count": 8, "edge_count": 168, ...
9f6774c340c5
81ec59384e47
train
glm-5.3
2
3,300
{ "repository": "https://github.com/XUANTIE-RV/openc910", "commit": "b91c90914c19f114d35c8f6b73408eb241ed847c", "path": "C910_RTL_FACTORY/gen_rtl/lsu/rtl/ct_spsram_512x52.v", "sha256": "138cba4bf8288129c2a8b5c629db8b3b9bc96d77c04d63546bd877ec320d3de4" }
For the ct_rtu_pst_vreg_entry module, how do its size and complexity compare with the potential gains from an area-focused optimization, and is that optimization advisable?
ct_rtu_pst_vreg_entry is a fairly large design with 448 lines of code, cyclomatic complexity 65, nesting depth 18, and 2181 operators, with 9 always blocks and 23 assign statements across 18 regs and 46 wires. Area-focused optimization via mux sharing and aggressive resource sharing is estimated to improve area by -15....
github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/rtu/rtl/ct_rtu_pst_vreg_entry.v
ct_rtu_pst_vreg_entry
optimization_advisor+static_analyzer
[ { "target_metric": "area" }, { "analysis_type": "full" } ]
[optimization_advisor {"target_metric": "area"}] { "status": "success", "target_metric": "area", "recommended_recipes": [ "synth -top ct_rtu_pst_vreg_entry -flatten", "opt -full; share -aggressive; opt", "abc -g gates -liberty stdcells.lib", "opt_clean -purge" ], "optimization_suggestions": [ ...
multi_tool
optimization_advisor+static_analyzer
compositional
c1f129d22e6e
[{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For the ct_rtu_pst_vreg_entry module, how do its size and complexity compare with the potential gains from an area-focused optimization, and is that optimization advisable? [optimization_advisor {"target_metric": "area"}] { "status": "success", "target_metric": "area", "recommended_recipes": [ "syn...
40e1ccc4be90
82d076c4a055
train
glm-5.3
2
3,300
{ "repository": "https://github.com/XUANTIE-RV/openc910", "commit": "b91c90914c19f114d35c8f6b73408eb241ed847c", "path": "C910_RTL_FACTORY/gen_rtl/rtu/rtl/ct_rtu_pst_vreg_entry.v", "sha256": "ac976ab610cbaa7416d628807722a40bf0fb964fcee3dbcb11613bef0d45a98b" }
For the module asic_aoi211, is the delay optimization worth it given how small and simple the module is? Summarize what the delay optimization would cost in area and power, and relate that to the module's measured complexity and port count.
The module asic_aoi211 is very small and simple, with 9 lines of code, cyclomatic complexity of 1, 18 operators, and only 5 ports total (4 inputs and 1 output), so aggressive optimization is likely unnecessary. The delay optimization would improve delay by -20.0 but costs 10.0 more area and 5.0 more power, which for su...
github_repos/aolofsson_oh/asiclib/hdl/asic_aoi211.v
asic_aoi211
optimization_advisor+static_analyzer
[ { "target_metric": "delay" }, { "analysis_type": "full" } ]
[optimization_advisor {"target_metric": "delay"}] { "status": "success", "target_metric": "delay", "recommended_recipes": [ "synth -top asic_aoi211", "opt -fast", "abc -fast -liberty stdcells.lib", "opt_clean" ], "optimization_suggestions": [ { "type": "pipeline_insertion", "de...
multi_tool
optimization_advisor+static_analyzer
compositional
4fe793058938
[{"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For the module asic_aoi211, is the delay optimization worth it given how small and simple the module is? Summarize what the delay optimization would cost in area and power, and relate that to the module's measured complexity and port count. [optimization_advisor {"target_metric": "delay"}] { "status": "suc...
94db320a0ba2
825c195ed620
train
glm-5.3
2
3,300
{ "repository": "https://github.com/aolofsson/oh", "commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067", "path": "asiclib/hdl/asic_aoi211.v", "sha256": "02a9cbe3dfd29366db7a344cd0c6331e860c47e99d997ae5fff2e5e224adff11" }
For the ct_iu_rbus module, how does its structural complexity from the CDFG and code analysis compare with its synthesized cost in area, delay, and power, and what are the key figures to watch if we want to trim it?
The ct_iu_rbus module has a dense CDFG with 116 nodes, 2484 edges, and an average degree of 21.41, and the code side shows 528 lines of code with a cyclomatic complexity of 22 across 8 always blocks and 45 assign statements. After medium-level optimization targeting area and delay, synthesis reports an area of 1942.5, ...
github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/iu/rtl/ct_iu_rbus.v
ct_iu_rbus
graph_extractor+static_analyzer+synthesis_tool
[ { "graph_type": "CDFG" }, { "analysis_type": "full" }, { "optimization_level": "medium" } ]
[graph_extractor {"graph_type": "CDFG"}] { "status": "success", "graph_type": "CDFG", ...[61048 chars elided]... "node_count": 116, "edge_count": 2484, "graph_properties": { "node_types": { "$logic_or": 9, "$mux": 5, "$adffe": 6, "$adff": 2, "$pmux": 4, "$eq": 10, ...
multi_tool
graph_extractor+static_analyzer+synthesis_tool
compositional
e3ac515f8d9f
[{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}]
Question: For the ct_iu_rbus module, how does its structural complexity from the CDFG and code analysis compare with its synthesized cost in area, delay, and power, and what are the key figures to watch if we want to trim it? [graph_extractor {"graph_type": "CDFG"}] { "status": "success", "graph_type": "CDFG", ......
cc544bf476fe
8306c599ade4
train
glm-5.3
3
3,300
{ "repository": "https://github.com/XUANTIE-RV/openc910", "commit": "b91c90914c19f114d35c8f6b73408eb241ed847c", "path": "C910_RTL_FACTORY/gen_rtl/iu/rtl/ct_iu_rbus.v", "sha256": "fb7cdc7abfed4f8a9b7502286de450d00f5afe42d4d20c8ef2d7162b485803e6" }
For the pair_sad module, how does the structure of its CDFG compare with the complexity figures from a static review of the code — specifically, what node types and counts appear in the graph, and how do the port, instantiation, and operator counts reported statically line up with them?
The CDFG of pair_sad has 8 nodes and 81 edges (average degree 10.12), comprising 2 $sub nodes, 1 double_addsub, 4 port_inputs, and 1 port_output, and the static analysis matches this with 1 input and 1 output port (2 total), an instantiation of double_addsub, and 132 operators in 13 lines of code with cyclomatic comple...
github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/video/pair_sad.v
pair_sad
graph_extractor+static_analyzer
[ { "graph_type": "CDFG" }, { "analysis_type": "full" } ]
[graph_extractor {"graph_type": "CDFG"}] { "status": "success", "graph_type": "CDFG", ...[8601 chars elided]... "node_count": 8, "edge_count": 81, "graph_properties": { "node_types": { "$sub": 2, "double_addsub": 1, "port_input": 4, "port_output": 1 }, "avg_degree": 10.12, ...
multi_tool
graph_extractor+static_analyzer
compositional
b36b10d02da0
[{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For the pair_sad module, how does the structure of its CDFG compare with the complexity figures from a static review of the code — specifically, what node types and counts appear in the graph, and how do the port, instantiation, and operator counts reported statically line up with them? [graph_extractor {"gr...
272f88bd06ee
83ff7b8dfbf1
train
glm-5.3
2
3,300
{ "repository": "https://github.com/pConst/basic_verilog", "commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614", "path": "Advanced Synthesis Cookbook/video/pair_sad.v", "sha256": "1ff3d550e078bf797a506e72c87bd3a71548bbca6ad9b95e4b0f597500d3feb8" }
For the axi2ahb module, if I apply the recommended delay-focused optimization flow, what area and power impact should I expect relative to the current synthesis results of 2397.5 area, 569.38 delay, and 1.408 power?
The current implementation of axi2ahb synthesizes to an area of 2397.5, a delay of 569.38, and a power of 1.408 with 1408 gates, including 466 NAND cells. The delay optimization is estimated to reduce delay by -20.0 while increasing area by 10.0 and power by 5.0, consistent with the noted trade-offs of higher speed at ...
github_repos/XUANTIE-RV_openc910/smart_run/logical/axi/axi2ahb.v
axi2ahb
optimization_advisor+synthesis_tool
[ { "target_metric": "delay" }, { "optimization_level": "medium" } ]
[optimization_advisor {"target_metric": "delay"}] { "status": "success", "target_metric": "delay", "recommended_recipes": [ "synth -top axi2ahb", "opt -fast", "abc -fast -liberty stdcells.lib", "opt_clean" ], "optimization_suggestions": [ { "type": "pipeline_insertion", "descri...
multi_tool
optimization_advisor+synthesis_tool
compositional
4aff1c4e5a57
[{"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}]
Question: For the axi2ahb module, if I apply the recommended delay-focused optimization flow, what area and power impact should I expect relative to the current synthesis results of 2397.5 area, 569.38 delay, and 1.408 power? [optimization_advisor {"target_metric": "delay"}] { "status": "success", "target_metric":...
e88abd6b9cfb
8442ee5bb3a9
train
glm-5.3
2
3,300
{ "repository": "https://github.com/XUANTIE-RV/openc910", "commit": "b91c90914c19f114d35c8f6b73408eb241ed847c", "path": "smart_run/logical/axi/axi2ahb.v", "sha256": "75734fa187130f8c816a536397cf50c573dd002e6769cc4261cd0e128495e8a8" }
For the module approx_fp_invsqrt, compare the dataflow structure with the synthesis results: what does the DFG reveal about the operators and state elements, and how do these translate into the gate-level area, delay, and power figures?
The DFG for approx_fp_invsqrt has 39 nodes and 1726 edges, dominated by 19 $dff, 8 $sub, 4 $add, and 3 $mul nodes with an average degree of 44.26. Synthesis maps this to 6371 gates (with 289 $_DFF_P_ flip-flops and 2641 $_NAND_ cells as the largest groups), giving an area of 9274.5, a critical-path delay of 827.38, and...
github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/float/approx_fp_invsqrt.v
approx_fp_invsqrt
graph_extractor+synthesis_tool
[ { "graph_type": "DFG" }, { "optimization_level": "medium" } ]
[graph_extractor {"graph_type": "DFG"}] { "status": "success", "graph_type": "DFG", ...[33546 chars elided]... "node_count": 39, "edge_count": 1726, "graph_properties": { "node_types": { "$sub": 8, "$shr": 1, "$add": 4, "$mul": 3, "$dff": 19, "scale_up": 1, "port_...
multi_tool
graph_extractor+synthesis_tool
compositional
a084ba4d2e5f
[{"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}]
Question: For the module approx_fp_invsqrt, compare the dataflow structure with the synthesis results: what does the DFG reveal about the operators and state elements, and how do these translate into the gate-level area, delay, and power figures? [graph_extractor {"graph_type": "DFG"}] { "status": "success", "grap...
f529a51d9eba
8452521e6c16
train
glm-5.3
2
3,300
{ "repository": "https://github.com/pConst/basic_verilog", "commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614", "path": "Advanced Synthesis Cookbook/float/approx_fp_invsqrt.v", "sha256": "2ef9d93fa433a7d1b67def99340bd3c2f3db9eae809212a6c759eeb72f5db844" }
For the oh_mux2 module, do the RTL-to-netlist mapping results look consistent with the structure shown in its DFG graph analysis?
The DFG for oh_mux2 has 8 nodes and 9 edges, built from 2 $and gates and 1 $or gate plus 4 inputs and 1 output, which is consistent with the mapping report showing a 100.0 alignment score with 2 rtl signals (sel1 and sel0) and 0 unmapped signals, even though the netlist contains 14 wires and 0 cells.
github_repos/aolofsson_oh/stdlib/rtl/oh_mux2.v
oh_mux2
cross_stage_mapper+graph_extractor
[ {}, { "graph_type": "DFG" } ]
[cross_stage_mapper {}] { "status": "success", "rtl_to_netlist_mapping": { "sel1": [ "sel1" ], "sel0": [ "sel0" ] }, "alignment_score": 100.0, "unmapped_elements": [], "mapping_statistics": { "rtl_signals": 2, "netlist_wires": 14, "netlist_cells": 0, "mapped_signa...
multi_tool
cross_stage_mapper+graph_extractor
compositional
2c28c0286af1
[{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}]
Question: For the oh_mux2 module, do the RTL-to-netlist mapping results look consistent with the structure shown in its DFG graph analysis? [cross_stage_mapper {}] { "status": "success", "rtl_to_netlist_mapping": { "sel1": [ "sel1" ], "sel0": [ "sel0" ] }, "alignment_score": 100.0, ...
6c7b0c3df067
846b1a91aee1
train
glm-5.3
2
3,300
{ "repository": "https://github.com/aolofsson/oh", "commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067", "path": "stdlib/rtl/oh_mux2.v", "sha256": "e3109c1c98dd88fa3d28c9dd8143d40bf8ca8876f269dfedacecab98b45d3574" }
For the oh_mux2 module, how does the structure shown in its CDFG compare with the synthesis results after medium-level optimization in terms of cell counts and delay, and are they consistent?
The CDFG of oh_mux2 contains 8 nodes and 9 edges, built from two AND gates, one OR gate, four input ports, and one output port, which matches the 3-gate implementation reported by synthesis. Synthesis maps this to three NAND gates (all $_NAND_), giving an area of 3.0, a gate count of 3, 7 wires, and a critical-path del...
github_repos/aolofsson_oh/stdlib/rtl/oh_mux2.v
oh_mux2
graph_extractor+synthesis_tool
[ { "graph_type": "CDFG" }, { "optimization_level": "medium" } ]
[graph_extractor {"graph_type": "CDFG"}] { "status": "success", "graph_type": "CDFG", ...[1775 chars elided]... "node_count": 8, "edge_count": 9, "graph_properties": { "node_types": { "$and": 2, "$or": 1, "port_input": 4, "port_output": 1 }, "avg_degree": 1.12, "module_...
multi_tool
graph_extractor+synthesis_tool
compositional
6f0a08e58138
[{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}]
Question: For the oh_mux2 module, how does the structure shown in its CDFG compare with the synthesis results after medium-level optimization in terms of cell counts and delay, and are they consistent? [graph_extractor {"graph_type": "CDFG"}] { "status": "success", "graph_type": "CDFG", ...[1775 chars elided]... ...
289ad4e2b2b1
846b1a91aee1
train
glm-5.3
2
3,300
{ "repository": "https://github.com/aolofsson/oh", "commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067", "path": "stdlib/rtl/oh_mux2.v", "sha256": "e3109c1c98dd88fa3d28c9dd8143d40bf8ca8876f269dfedacecab98b45d3574" }
For the axi_ad9361_rx_pnmon module, how do the sequential elements and overall complexity seen in the CDFG and static analysis compare with the register cells reported after medium-level delay/power-optimized synthesis?
The CDFG for axi_ad9361_rx_pnmon contains 83 nodes and 868 edges, including 6 $dffe, 6 $dff, and 1 $sdff node plus a nested ad_pnmon instance, consistent with the static analysis showing 3 always blocks, 16 regs, and a nesting depth of 15 across 228 lines of code. After synthesis at medium optimization these become 93 ...
github_repos/analogdevicesinc_hdl/library/axi_ad9361/axi_ad9361_rx_pnmon.v
axi_ad9361_rx_pnmon
graph_extractor+static_analyzer+synthesis_tool
[ { "graph_type": "CDFG" }, { "analysis_type": "full" }, { "optimization_level": "medium" } ]
[graph_extractor {"graph_type": "CDFG"}] { "status": "success", "graph_type": "CDFG", ...[53324 chars elided]... "node_count": 83, "edge_count": 868, "graph_properties": { "node_types": { "$reduce_xor": 2, "$xor": 50, "$eq": 2, "$mux": 6, "$and": 1, "$not": 1, "$d...
multi_tool
graph_extractor+static_analyzer+synthesis_tool
compositional
8f1251e7f07c
[{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}]
Question: For the axi_ad9361_rx_pnmon module, how do the sequential elements and overall complexity seen in the CDFG and static analysis compare with the register cells reported after medium-level delay/power-optimized synthesis? [graph_extractor {"graph_type": "CDFG"}] { "status": "success", "graph_type": "CDFG",...
55188831d862
855951907040
train
glm-5.3
3
3,300
{ "repository": "https://github.com/analogdevicesinc/hdl", "commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f", "path": "library/axi_ad9361/axi_ad9361_rx_pnmon.v", "sha256": "f366c19ff2687bc745df0b4306874f71e9e338aa61c13260d504043dc439db8f" }
For ct_sysio_top, how do the structural characteristics of its AIG relate to the delay optimization opportunities—specifically, what does the graph structure suggest about where the timing issues come from, and what trade-offs would the suggested delay optimizations involve?
The AIG for ct_sysio_top has 142 nodes and 395 edges with an average degree of 2.78, dominated by 77 $_DFFE_PP_ flip-flops plus 3 $_DFFE_PN0P_ and 2 ct_sysio_kid instances, and the delay-oriented optimization suggests pipelining via register retiming and logic duplication to cut fanout. These would bring an estimated d...
github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/cpu/rtl/ct_sysio_top.v
ct_sysio_top
graph_extractor+optimization_advisor
[ { "graph_type": "AIG" }, { "target_metric": "delay" } ]
[graph_extractor {"graph_type": "AIG"}] { "status": "success", "graph_type": "AIG", ...[36226 chars elided]... "node_count": 142, "edge_count": 395, "graph_properties": { "node_types": { "$_DFFE_PP_": 77, "$_DFFE_PN0P_": 3, "$_AND_": 1, "ct_sysio_kid": 2, "gated_clk_cell": 1,...
multi_tool
graph_extractor+optimization_advisor
compositional
50d522cfd6ac
[{"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}]
Question: For ct_sysio_top, how do the structural characteristics of its AIG relate to the delay optimization opportunities—specifically, what does the graph structure suggest about where the timing issues come from, and what trade-offs would the suggested delay optimizations involve? [graph_extractor {"graph_type": "...
215b41619cce
855bd9122be2
train
glm-5.3
2
3,300
{ "repository": "https://github.com/XUANTIE-RV/openc910", "commit": "b91c90914c19f114d35c8f6b73408eb241ed847c", "path": "C910_RTL_FACTORY/gen_rtl/cpu/rtl/ct_sysio_top.v", "sha256": "ce012f74b22a5897a22ac9e912f78ed4a71032fd6d8d144e8165166669c528b3" }
For the test_udp_ip_tx module, is applying the recommended area optimization worthwhile given its code structure — what area and delay changes are expected, and how does the module's complexity compare to that impact?
The area-focused optimization for test_udp_ip_tx is estimated to reduce area by -15.0 with a delay increase of 5.0, and aggressive sharing would increase routing complexity. Given the module is a simple 196-line testbench with cyclomatic complexity 2 and nesting depth 1 that instantiates udp_ip_tx, the trade-off of hig...
github_repos/alexforencich_verilog-ethernet/tb/test_udp_ip_tx.v
test_udp_ip_tx
optimization_advisor+static_analyzer
[ { "target_metric": "area" }, { "analysis_type": "full" } ]
[optimization_advisor {"target_metric": "area"}] { "status": "success", "target_metric": "area", "recommended_recipes": [ "synth -top test_udp_ip_tx -flatten", "opt -full; share -aggressive; opt", "abc -g gates -liberty stdcells.lib", "opt_clean -purge" ], "optimization_suggestions": [ { ...
multi_tool
optimization_advisor+static_analyzer
compositional
78cdf8e05876
[{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For the test_udp_ip_tx module, is applying the recommended area optimization worthwhile given its code structure — what area and delay changes are expected, and how does the module's complexity compare to that impact? [optimization_advisor {"target_metric": "area"}] { "status": "success", "target_metric"...
987632d982b4
85e95f3d25b2
train
glm-5.3
2
3,300
{ "repository": "https://github.com/alexforencich/verilog-ethernet", "commit": "77320a9471d19c7dd383914bc049e02d9f4f1ffb", "path": "tb/test_udp_ip_tx.v", "sha256": "5e3e8084795908cb66ef0da27f80ad05215b59867d8fc5859bd759e842fd578f" }
For the module sum_of_3bit_pair, how does the structure of the CDFG compare with the source-code statistics — in particular, how many mux nodes does the CDFG contain versus how many lines of code and operators were measured, and does anything in the code analysis explain the high average connectivity?
The CDFG for sum_of_3bit_pair has 44 nodes and 533 edges with an average degree of 12.11, and 41 of those nodes are $mux cells with only 2 input ports and 1 output port. The code analysis reports 75 lines of code with 199 operators and a cyclomatic complexity of 3 inside a single always block, and the dense mux fan-out...
github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/arithmetic/sum_of_3bit_pair.v
sum_of_3bit_pair
graph_extractor+static_analyzer
[ { "graph_type": "CDFG" }, { "analysis_type": "full" } ]
[graph_extractor {"graph_type": "CDFG"}] { "status": "success", "graph_type": "CDFG", ...[34408 chars elided]... "node_count": 44, "edge_count": 533, "graph_properties": { "node_types": { "$mux": 41, "port_input": 2, "port_output": 1 }, "avg_degree": 12.11, "module_name": "su...
multi_tool
graph_extractor+static_analyzer
compositional
e542b97d45ff
[{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For the module sum_of_3bit_pair, how does the structure of the CDFG compare with the source-code statistics — in particular, how many mux nodes does the CDFG contain versus how many lines of code and operators were measured, and does anything in the code analysis explain the high average connectivity? [graph...
86e75f6909bd
8629c8b38c0d
train
glm-5.3
2
3,300
{ "repository": "https://github.com/pConst/basic_verilog", "commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614", "path": "Advanced Synthesis Cookbook/arithmetic/sum_of_3bit_pair.v", "sha256": "b3231bcec73a22ff8e6fcc14ec89dbb4f7665abd06df34ce51c458713d0fb8ba" }
For the module test_ip_64, how do the delay-focused optimization suggestions trade off against the module's complexity, and does the code structure support them?
The delay optimization for test_ip_64 is estimated to improve delay by -20.0 at the cost of about 10.0 more area and 5.0 more power, suggesting pipelining of arithmetic operations and logic duplication to reduce fanout. The module is structurally simple, with 277 lines of code, cyclomatic complexity 2, nesting depth 1,...
github_repos/alexforencich_verilog-ethernet/tb/test_ip_64.v
test_ip_64
optimization_advisor+static_analyzer
[ { "target_metric": "delay" }, { "analysis_type": "full" } ]
[optimization_advisor {"target_metric": "delay"}] { "status": "success", "target_metric": "delay", "recommended_recipes": [ "synth -top test_ip_64", "opt -fast", "abc -fast -liberty stdcells.lib", "opt_clean" ], "optimization_suggestions": [ { "type": "pipeline_insertion", "des...
multi_tool
optimization_advisor+static_analyzer
compositional
17fdecc89649
[{"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For the module test_ip_64, how do the delay-focused optimization suggestions trade off against the module's complexity, and does the code structure support them? [optimization_advisor {"target_metric": "delay"}] { "status": "success", "target_metric": "delay", "recommended_recipes": [ "synth -top t...
012631c67ca8
8646e6a1e5cd
train
glm-5.3
2
3,300
{ "repository": "https://github.com/alexforencich/verilog-ethernet", "commit": "77320a9471d19c7dd383914bc049e02d9f4f1ffb", "path": "tb/test_ip_64.v", "sha256": "32b4dd902d60e1a5699f3ad2f0e612bd1c3331334bc2d1fce80c29db6464805b" }
For system_top, do the port counts from the CDFG graph analysis match up with the RTL-to-netlist signal mapping, and can you confirm all signals were mapped?
The CDFG for system_top has 30 inout ports, 17 output ports, and 14 input ports across its 66 nodes and 545 edges, while the RTL-to-netlist mapping reports 36 RTL signals and 36 mapped signals with 0 unmapped and an alignment score of 100.0. Since all 36 RTL signals mapped with an alignment score of 100.0 and no unmapp...
github_repos/analogdevicesinc_hdl/projects/ada4355_fmc/zed/system_top_bufmrce_en.v
system_top
cross_stage_mapper+graph_extractor
[ {}, { "graph_type": "CDFG" } ]
[cross_stage_mapper {}] { "status": "success", "rtl_to_netlist_mapping": { "hdmi_data": [ "hdmi_data", "hdmi_data_e" ], "i2s_sdata_in": [ "i2s_sdata_in" ], "dco_n": [ "dco_n" ], "i2s_bclk": [ "i2s_bclk" ], "ada4355_csn": [ "ada4355_csn" ], ...
multi_tool
cross_stage_mapper+graph_extractor
compositional
c9bb748db16a
[{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}]
Question: For system_top, do the port counts from the CDFG graph analysis match up with the RTL-to-netlist signal mapping, and can you confirm all signals were mapped? [cross_stage_mapper {}] { "status": "success", "rtl_to_netlist_mapping": { "hdmi_data": [ "hdmi_data", "hdmi_data_e" ], "i2...
b4327075c653
868b72b5a227
train
glm-5.3
2
3,300
{ "repository": "https://github.com/analogdevicesinc/hdl", "commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f", "path": "projects/ada4355_fmc/zed/system_top_bufmrce_en.v", "sha256": "c20d7ab9f57a5ce3ea1fc6e9ce4336a37aecc5a100a6a7a6195f9a6d89c4d49e" }
For the pcie_ptile_if module, how well does the RTL-to-netlist signal correspondence hold up given the module's port and signal statistics, and what do synthesis results indicate about its structural composition after optimization for delay?
The mapping achieved an alignment score of 93.55 with 29 of 31 RTL signals mapped (only 'from' and 'wire' unmapped), consistent with the static analysis showing 29 wires and 93 total ports (47 inputs, 46 outputs). Synthesis produced just 3 cells—pcie_ptile_cfg, pcie_ptile_if_rx, and pcie_ptile_if_tx—with a critical pat...
github_repos/corundum_corundum/fpga/lib/pcie/rtl/pcie_ptile_if.v
pcie_ptile_if
cross_stage_mapper+static_analyzer+synthesis_tool
[ {}, { "analysis_type": "full" }, { "optimization_level": "medium" } ]
[cross_stage_mapper {}] { "status": "success", "rtl_to_netlist_mapping": { "tx_st_ready": [ "tx_st_ready" ], "tx_rd_req_tlp_ready": [ "tx_rd_req_tlp_ready" ], "tx_fc_nph_av": [ "tx_fc_nph_av" ], "clk": [ "clk" ], "tx_fc_pd_av": [ "tx_fc_pd_ ...[1158 ...
multi_tool
cross_stage_mapper+static_analyzer+synthesis_tool
compositional
abe0cc498eee
[{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}]
Question: For the pcie_ptile_if module, how well does the RTL-to-netlist signal correspondence hold up given the module's port and signal statistics, and what do synthesis results indicate about its structural composition after optimization for delay? [cross_stage_mapper {}] { "status": "success", "rtl_to_netlist_...
159f8b289e1c
873605b32f45
train
glm-5.3
3
3,300
{ "repository": "https://github.com/corundum/corundum", "commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce", "path": "fpga/lib/pcie/rtl/pcie_ptile_if.v", "sha256": "8cec3e6e9188f3b849447ff9d4af703f9af9bd0d74ec0454951ea0187aaf41f6" }
For axis_frame_join, given the current synthesized design and the power-focused optimization recommendations, how much power could the optimization save, and what cells and area would it trade off?
The current synthesis of axis_frame_join has area 470.5, power 0.347, delay 297.61, and 347 gates dominated by 157 $_NAND_ and 89 $_AND_ cells plus 20 $_DFFE_PP_ registers. The power optimization (clock gating and operand isolation) is estimated to improve power by -25.0 while trading off only 5.0 in area and 5.0 in de...
github_repos/alexforencich_verilog-ethernet/lib/axis/rtl/axis_frame_join.v
axis_frame_join
optimization_advisor+synthesis_tool
[ { "target_metric": "power" }, { "optimization_level": "medium" } ]
[optimization_advisor {"target_metric": "power"}] { "status": "success", "target_metric": "power", "recommended_recipes": [ "synth -top axis_frame_join", "opt; share; opt", "abc -g gates -liberty stdcells.lib", "opt_clean; clockgate" ], "optimization_suggestions": [ { "type": "clock_...
multi_tool
optimization_advisor+synthesis_tool
compositional
a136273a3567
[{"tool": "optimization_advisor", "parameters": {"target_metric": "power"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}]
Question: For axis_frame_join, given the current synthesized design and the power-focused optimization recommendations, how much power could the optimization save, and what cells and area would it trade off? [optimization_advisor {"target_metric": "power"}] { "status": "success", "target_metric": "power", "recom...
0b6b5fbbe881
8703ef9b632c
train
glm-5.3
2
3,300
{ "repository": "https://github.com/alexforencich/verilog-ethernet", "commit": "77320a9471d19c7dd383914bc049e02d9f4f1ffb", "path": "lib/axis/rtl/axis_frame_join.v", "sha256": "32cfa21be9b9bd7c8d23abab54586cd3665a59dce042a3147b695dc663ef0388" }
For the ip module, the code review shows a fairly complex design with 291 lines of code, cyclomatic complexity 15, and nesting depth 15. Given the synthesized results for area, delay, and power under medium delay-oriented optimization, does this complexity translate into a large physical implementation, and what do the...
Despite the code complexity of 291 lines of code and cyclomatic complexity 15, the synthesized ip module is modest, with an area of 300.0, delay of 424.96, power of 0.082, and a gate count of 82 cells. The implementation is register-heavy: 48 $_DFFE_PP_ plus 6 $_SDFF_PP0_ and 1 $_SDFFE_PP0N_ cells dominate, with only 7...
github_repos/corundum_corundum/fpga/lib/eth/rtl/ip.v
ip
static_analyzer+synthesis_tool
[ { "analysis_type": "full" }, { "optimization_level": "medium" } ]
[static_analyzer {"analysis_type": "full"}] { "status": "success", "module_name": "ip", "port_count": { "inputs": 32, "outputs": 44, "inouts": 0, "total": 76 }, "signal_count": { "wires": 78, "regs": 7, "parameters": 0, "total": 85 }, "always_blocks": 2, "assign_statement...
multi_tool
static_analyzer+synthesis_tool
compositional
f1bd51710d89
[{"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}]
Question: For the ip module, the code review shows a fairly complex design with 291 lines of code, cyclomatic complexity 15, and nesting depth 15. Given the synthesized results for area, delay, and power under medium delay-oriented optimization, does this complexity translate into a large physical implementation, and w...
b9d813c958e1
86e8267b7ad5
train
glm-5.3
2
3,300
{ "repository": "https://github.com/corundum/corundum", "commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce", "path": "fpga/lib/eth/rtl/ip.v", "sha256": "ec609c681edf22a1bcf803255dceeffe4b668b541bce00105e7c0cdaec710c42" }
For the axi_ad9434_core module, how do the RTL-to-netlist mapping results and the CDFG structure relate to the suggested delay optimization, and what improvement is expected?
In axi_ad9434_core, 38 of 45 RTL signals were mapped (7 unmapped, including up_wack, up_rack, and up_rdata) for an alignment score of 84.44, while the CDFG has 50 nodes and 1338 edges with an average degree of 26.76, indicating high fanout that motivates the suggested logic duplication. Applying the delay-focused optim...
github_repos/analogdevicesinc_hdl/library/axi_ad9434/axi_ad9434_core.v
axi_ad9434_core
cross_stage_mapper+graph_extractor+optimization_advisor
[ {}, { "graph_type": "CDFG" }, { "target_metric": "delay" } ]
[cross_stage_mapper {}] { "status": "success", "rtl_to_netlist_mapping": { "up_wdata": [ "up_wdata" ], "up_rstn": [ "up_rstn" ], "up_wack": [], "adc_dfmt_type_s": [ "adc_dfmt_type_s" ], "up_status_pn_err_s": [ "up_status_pn_err_s" ], "up_wreq ...[1433 ...
multi_tool
cross_stage_mapper+graph_extractor+optimization_advisor
compositional
5d3cd7345ab1
[{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}]
Question: For the axi_ad9434_core module, how do the RTL-to-netlist mapping results and the CDFG structure relate to the suggested delay optimization, and what improvement is expected? [cross_stage_mapper {}] { "status": "success", "rtl_to_netlist_mapping": { "up_wdata": [ "up_wdata" ], "up_rstn"...
659314d90794
879230a4de26
train
glm-5.3
3
3,300
{ "repository": "https://github.com/analogdevicesinc/hdl", "commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f", "path": "library/axi_ad9434/axi_ad9434_core.v", "sha256": "f92d0f6b8d6cfec641568f5a4fb81e697a953e26d7555e86c1075289e6fcfd4b" }
For the pcie_tlp_fifo_mux module, is it worth applying the aggressive area optimization recipes, considering its complexity and port structure?
The pcie_tlp_fifo_mux module is quite complex, with 499 lines of code, cyclomatic complexity 45, 39 total ports (16 inputs, 23 outputs), and 768 operators, so area reduction is attractive. The suggested flow (mux sharing via muxcover and aggressive resource sharing via share -aggressive) is estimated to cut area by -15...
github_repos/corundum_corundum/fpga/lib/pcie/rtl/pcie_tlp_fifo_mux.v
pcie_tlp_fifo_mux
optimization_advisor+static_analyzer
[ { "target_metric": "area" }, { "analysis_type": "full" } ]
[optimization_advisor {"target_metric": "area"}] { "status": "success", "target_metric": "area", "recommended_recipes": [ "synth -top pcie_tlp_fifo_mux -flatten", "opt -full; share -aggressive; opt", "abc -g gates -liberty stdcells.lib", "opt_clean -purge" ], "optimization_suggestions": [ ...
multi_tool
optimization_advisor+static_analyzer
compositional
878aff2c17d7
[{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For the pcie_tlp_fifo_mux module, is it worth applying the aggressive area optimization recipes, considering its complexity and port structure? [optimization_advisor {"target_metric": "area"}] { "status": "success", "target_metric": "area", "recommended_recipes": [ "synth -top pcie_tlp_fifo_mux -fl...
fdc710312c22
878f67a11742
train
glm-5.3
2
3,300
{ "repository": "https://github.com/corundum/corundum", "commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce", "path": "fpga/lib/pcie/rtl/pcie_tlp_fifo_mux.v", "sha256": "509ae597705cf3ee22447edd7176b1ad6c34a3d49d95a4994ad37dae50161ee9" }
For the pcie_ptile_if module, compare the RTL-to-netlist signal mapping against the DFG structure and the synthesis results: how consistent are the wire counts, which signals failed to map, and what do the area/delay/power figures look like given the module only contains three sub-blocks?
The RTL-to-netlist mapping mapped 29 of 31 RTL signals (unmapped: "from" and "wire") with an alignment score of 93.55 against 92 netlist wires, which matches the 92 wires and 2161 wire bits reported by synthesis. The DFG for pcie_ptile_if has 95 nodes and 2154 edges (avg_degree 22.67) with exactly three submodule nodes...
github_repos/corundum_corundum/fpga/lib/pcie/rtl/pcie_ptile_if.v
pcie_ptile_if
cross_stage_mapper+graph_extractor+synthesis_tool
[ {}, { "graph_type": "DFG" }, { "optimization_level": "medium" } ]
[cross_stage_mapper {}] { "status": "success", "rtl_to_netlist_mapping": { "tx_st_ready": [ "tx_st_ready" ], "tx_rd_req_tlp_ready": [ "tx_rd_req_tlp_ready" ], "tx_fc_nph_av": [ "tx_fc_nph_av" ], "clk": [ "clk" ], "tx_fc_pd_av": [ "tx_fc_pd_ ...[1158 ...
multi_tool
cross_stage_mapper+graph_extractor+synthesis_tool
compositional
189d99bd71f6
[{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}]
Question: For the pcie_ptile_if module, compare the RTL-to-netlist signal mapping against the DFG structure and the synthesis results: how consistent are the wire counts, which signals failed to map, and what do the area/delay/power figures look like given the module only contains three sub-blocks? [cross_stage_mapper...
bb1addc94030
873605b32f45
train
glm-5.3
3
3,300
{ "repository": "https://github.com/corundum/corundum", "commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce", "path": "fpga/lib/pcie/rtl/pcie_ptile_if.v", "sha256": "8cec3e6e9188f3b849447ff9d4af703f9af9bd0d74ec0454951ea0187aaf41f6" }
For the pcie_tlp_fifo_mux module, how well did the RTL signals survive into the netlist, and does that seem reasonable given the module's structure — please mention the RTL-to-netlist alignment score, how many signals mapped versus unmapped, and relate that to the module's complexity figures and port/signal counts from...
The pcie_tlp_fifo_mux module achieved an alignment score of 61.9 with 13 of its 21 RTL signals mapped and 8 unmapped (such as segments, datapath, and out_fifo_half_full_reg), which is plausible given its substantial complexity: 499 lines of code, cyclomatic complexity of 45, 16 parameters, and 39 total ports (16 inputs...
github_repos/corundum_corundum/fpga/lib/pcie/rtl/pcie_tlp_fifo_mux.v
pcie_tlp_fifo_mux
cross_stage_mapper+static_analyzer
[ {}, { "analysis_type": "full" } ]
[cross_stage_mapper {}] { "status": "success", "rtl_to_netlist_mapping": { "segments": [], "rst": [ "rst" ], "wire": [], "out_fc_pd": [ "out_fc_pd" ], "clk": [ "clk" ], "out_fifo_full": [ "out_fifo_full" ], "out_fc_nph": [ "out_fc_nph" ],...
multi_tool
cross_stage_mapper+static_analyzer
compositional
ef036ec2591c
[{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For the pcie_tlp_fifo_mux module, how well did the RTL signals survive into the netlist, and does that seem reasonable given the module's structure — please mention the RTL-to-netlist alignment score, how many signals mapped versus unmapped, and relate that to the module's complexity figures and port/signal c...
9dbc4c3b0f26
878f67a11742
train
glm-5.3
2
3,300
{ "repository": "https://github.com/corundum/corundum", "commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce", "path": "fpga/lib/pcie/rtl/pcie_tlp_fifo_mux.v", "sha256": "509ae597705cf3ee22447edd7176b1ad6c34a3d49d95a4994ad37dae50161ee9" }
For fec_rot_7, the RTL-to-netlist mapping only scored 66.67 with 'count' unmapped — how well did the mapping hold up, and how does that relate to what synthesis produced in terms of area, delay, and the cells used?
The mapping aligned 2 of the 3 RTL signals (c mapped to co and c, co mapped to co) with an alignment score of 66.67, leaving count unmapped. Synthesis of fec_rot_7 produced an area of 46.0, a delay of 204.93, power of 0.023, and a netlist of 23 gates that are all $_XOR_ cells with 2 wires and 64 wire bits.
github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/ethernet_fec/fec_rot_7.v
fec_rot_7
cross_stage_mapper+synthesis_tool
[ {}, { "optimization_level": "medium" } ]
[cross_stage_mapper {}] { "status": "success", "rtl_to_netlist_mapping": { "c": [ "co", "c" ], "count": [], "co": [ "co" ] }, "alignment_score": 66.67, "unmapped_elements": [ "count" ], "mapping_statistics": { "rtl_signals": 3, "netlist_wires": 55, "ne...
multi_tool
cross_stage_mapper+synthesis_tool
compositional
6770d615a334
[{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}]
Question: For fec_rot_7, the RTL-to-netlist mapping only scored 66.67 with 'count' unmapped — how well did the mapping hold up, and how does that relate to what synthesis produced in terms of area, delay, and the cells used? [cross_stage_mapper {}] { "status": "success", "rtl_to_netlist_mapping": { "c": [ ...
251da3fe95c7
880251b25f28
train
glm-5.3
2
3,300
{ "repository": "https://github.com/pConst/basic_verilog", "commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614", "path": "Advanced Synthesis Cookbook/ethernet_fec/fec_rot_7.v", "sha256": "d53c1c8222224d6aaeeb90ef97e703298a91109b2a8f8b826b4f1d3359f6e3b8" }
For fec_rot_7, how well does the RTL-to-netlist signal mapping line up with the size of the logic network, considering that the netlist is essentially unmapped cells but the AIG already has many gates? Is the mapper's result trustworthy?
The mapping reported only 2 of 3 RTL signals mapped (count unmapped) with an alignment score of 66.67 over 55 netlist wires and 0 netlist cells, so nothing was verified at the cell level. However, the AIG for fec_rot_7 contains 198 nodes and 476 edges (84 AND and 112 NOT gates, average degree 2.4), showing substantial ...
github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/ethernet_fec/fec_rot_7.v
fec_rot_7
cross_stage_mapper+graph_extractor
[ {}, { "graph_type": "AIG" } ]
[cross_stage_mapper {}] { "status": "success", "rtl_to_netlist_mapping": { "c": [ "co", "c" ], "count": [], "co": [ "co" ] }, "alignment_score": 66.67, "unmapped_elements": [ "count" ], "mapping_statistics": { "rtl_signals": 3, "netlist_wires": 55, "ne...
multi_tool
cross_stage_mapper+graph_extractor
compositional
582969a90647
[{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}]
Question: For fec_rot_7, how well does the RTL-to-netlist signal mapping line up with the size of the logic network, considering that the netlist is essentially unmapped cells but the AIG already has many gates? Is the mapper's result trustworthy? [cross_stage_mapper {}] { "status": "success", "rtl_to_netlist_mapp...
f96df0d77ed0
880251b25f28
train
glm-5.3
2
3,300
{ "repository": "https://github.com/pConst/basic_verilog", "commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614", "path": "Advanced Synthesis Cookbook/ethernet_fec/fec_rot_7.v", "sha256": "d53c1c8222224d6aaeeb90ef97e703298a91109b2a8f8b826b4f1d3359f6e3b8" }
For the sys_pll module, the RTL-to-netlist mapping shows one unmapped signal while the static analysis lists all its ports and internal signals — does the unmapped element appear among the module's actual ports or signals, and how consistent are the two views overall?
The unmapped element is 'wire', which does not correspond to any of sys_pll's ports (2 inputs, 3 outputs) or its 5 internal wires, so it is likely an artifact rather than a real signal. The mapping still achieved an alignment score of 83.33 with 5 of 6 RTL signals mapped, and the static analysis confirms 5 wires with 0...
github_repos/pConst_basic_verilog/example_projects/quartus_test_prj_template_v4/ip/sys_pll/sys_pll.v
sys_pll
cross_stage_mapper+static_analyzer
[ {}, { "analysis_type": "full" } ]
[cross_stage_mapper {}] { "status": "success", "rtl_to_netlist_mapping": { "locked": [ "locked" ], "rst": [ "rst" ], "wire": [], "outclk_1": [ "outclk_1" ], "outclk_0": [ "outclk_0" ], "refclk": [ "refclk" ] }, "alignment_score": 83.33, ...
multi_tool
cross_stage_mapper+static_analyzer
compositional
50792691b8dc
[{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For the sys_pll module, the RTL-to-netlist mapping shows one unmapped signal while the static analysis lists all its ports and internal signals — does the unmapped element appear among the module's actual ports or signals, and how consistent are the two views overall? [cross_stage_mapper {}] { "status": "s...
7d538a8bcb66
88924380a26e
train
glm-5.3
2
3,300
{ "repository": "https://github.com/pConst/basic_verilog", "commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614", "path": "example_projects/quartus_test_prj_template_v4/ip/sys_pll/sys_pll.v", "sha256": "8383756703fb6a5a291283642a109b2c995416afd38e0826b4da1a4c8769773c" }
For soft_ecc_ram_64bit, is it worth applying the power-focused optimization recipes given its complexity, and how do the expected gains compare to the structure of the module?
The power optimization for soft_ecc_ram_64bit (including clock gating and operand isolation) is estimated to improve power by -25.0 with a 5.0 area and 5.0 delay cost, though it may add area overhead and clock gating adds timing complexity. The module is fairly substantial with 86 lines of code, cyclomatic complexity 6...
github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/ecc/soft_ecc_ram_64bit.v
soft_ecc_ram_64bit
optimization_advisor+static_analyzer
[ { "target_metric": "power" }, { "analysis_type": "full" } ]
[optimization_advisor {"target_metric": "power"}] { "status": "success", "target_metric": "power", "recommended_recipes": [ "synth -top soft_ecc_ram_64bit", "opt; share; opt", "abc -g gates -liberty stdcells.lib", "opt_clean; clockgate" ], "optimization_suggestions": [ { "type": "clo...
multi_tool
optimization_advisor+static_analyzer
compositional
43e54c580c1d
[{"tool": "optimization_advisor", "parameters": {"target_metric": "power"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For soft_ecc_ram_64bit, is it worth applying the power-focused optimization recipes given its complexity, and how do the expected gains compare to the structure of the module? [optimization_advisor {"target_metric": "power"}] { "status": "success", "target_metric": "power", "recommended_recipes": [ ...
ab301ccaa3f5
886cbecf0405
train
glm-5.3
2
3,300
{ "repository": "https://github.com/pConst/basic_verilog", "commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614", "path": "Advanced Synthesis Cookbook/ecc/soft_ecc_ram_64bit.v", "sha256": "ece5b3b463db7f8680d71fb6c1f10e28788edf68e45bc337bac208b1e9ca5906" }
For axi_ad9467_if, how well do the RTL and netlist line up after synthesis, and what in the code might explain any signals that didn't map?
RTL-to-netlist mapping for axi_ad9467_if succeeded with an alignment score of 94.74, mapping 18 of 19 RTL signals and leaving only "reg" unmapped while the netlist has 99 wires. The source contains 4 regs and 2 wires (6 total signals) across 1 always block with nesting depth 4 and 495 operators, and there were no lint ...
github_repos/analogdevicesinc_hdl/library/axi_ad9467/axi_ad9467_if.v
axi_ad9467_if
cross_stage_mapper+static_analyzer
[ {}, { "analysis_type": "full" } ]
[cross_stage_mapper {}] { "status": "success", "rtl_to_netlist_mapping": { "adc_or_n_s": [ "adc_or_n_s" ], "adc_or_p_s": [ "adc_or_p_s" ], "up_dwdata": [ "up_dwdata" ], "adc_or_in_p": [ "adc_or_in_p" ], "adc_or_n": [ "adc_or_n_s" ], "adc_clk_...
multi_tool
cross_stage_mapper+static_analyzer
compositional
98f46ba9a6f5
[{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For axi_ad9467_if, how well do the RTL and netlist line up after synthesis, and what in the code might explain any signals that didn't map? [cross_stage_mapper {}] { "status": "success", "rtl_to_netlist_mapping": { "adc_or_n_s": [ "adc_or_n_s" ], "adc_or_p_s": [ "adc_or_p_s" ]...
bfcc977a611a
892895f1decc
train
glm-5.3
2
3,300
{ "repository": "https://github.com/analogdevicesinc/hdl", "commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f", "path": "library/axi_ad9467/axi_ad9467_if.v", "sha256": "9d46b2181197006c3e6d7a46a297237598646d285988592d7415be8a691245ef" }
For the axi_ad9467_if module, if I apply the recommended area optimizations (mux sharing and aggressive resource sharing), how might the current synthesis results change, and what are the trade-offs given the design's composition?
The current synthesis of axi_ad9467_if has an area of 303.0, delay of 412.7, power of 0.118, and 118 cells dominated by 59 $_DFF_P_ flip-flops and 32 $_NAND_ gates over 63 wires. The area advisor estimates the optimization recipes would improve area by -15.0 and power by -10.0, but at the cost of a 5.0 delay increase a...
github_repos/analogdevicesinc_hdl/library/axi_ad9467/axi_ad9467_if.v
axi_ad9467_if
optimization_advisor+synthesis_tool
[ { "target_metric": "area" }, { "optimization_level": "medium" } ]
[optimization_advisor {"target_metric": "area"}] { "status": "success", "target_metric": "area", "recommended_recipes": [ "synth -top axi_ad9467_if -flatten", "opt -full; share -aggressive; opt", "abc -g gates -liberty stdcells.lib", "opt_clean -purge" ], "optimization_suggestions": [ { ...
multi_tool
optimization_advisor+synthesis_tool
compositional
b03b897e6849
[{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}]
Question: For the axi_ad9467_if module, if I apply the recommended area optimizations (mux sharing and aggressive resource sharing), how might the current synthesis results change, and what are the trade-offs given the design's composition? [optimization_advisor {"target_metric": "area"}] { "status": "success", "t...
1f84b7c33c65
892895f1decc
train
glm-5.3
2
3,300
{ "repository": "https://github.com/analogdevicesinc/hdl", "commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f", "path": "library/axi_ad9467/axi_ad9467_if.v", "sha256": "9d46b2181197006c3e6d7a46a297237598646d285988592d7415be8a691245ef" }
For the asic_xor3 module, how does its structure from the CDFG compare with the complexity and area-optimization findings — what would you highlight in a summary?
The asic_xor3 module is a purely combinational 3-input XOR described by 1 assign statement (cyclomatic complexity 1, 8 lines of code), and its CDFG has 6 nodes and 6 edges with two $xor operators, three inputs, and one output. An area-targeted optimization is estimated to reduce area by -15.0 and power by -10.0 at the ...
github_repos/aolofsson_oh/asiclib/hdl/asic_xor3.v
asic_xor3
graph_extractor+optimization_advisor+static_analyzer
[ { "graph_type": "CDFG" }, { "target_metric": "area" }, { "analysis_type": "full" } ]
[graph_extractor {"graph_type": "CDFG"}] { "status": "success", "graph_type": "CDFG", ...[1348 chars elided]... "node_count": 6, "edge_count": 6, "graph_properties": { "node_types": { "$xor": 2, "port_input": 3, "port_output": 1 }, "avg_degree": 1.0, "module_name": "asic_xor3...
multi_tool
graph_extractor+optimization_advisor+static_analyzer
compositional
8508af3b5bc3
[{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For the asic_xor3 module, how does its structure from the CDFG compare with the complexity and area-optimization findings — what would you highlight in a summary? [graph_extractor {"graph_type": "CDFG"}] { "status": "success", "graph_type": "CDFG", ...[1348 chars elided]... "node_count": 6, "edge_cou...
8539b9dbc0a1
899495b1dff9
train
glm-5.3
3
3,300
{ "repository": "https://github.com/aolofsson/oh", "commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067", "path": "asiclib/hdl/asic_xor3.v", "sha256": "369fa161e4373094f239b642d34af6d6ca710bdd00842c52fc70e8f8208d598f" }
For the hsci_mcore module, how complete is the RTL-to-netlist mapping, and if I apply the recommended area optimization, what impact would it have on area, delay, and power given the module's current complexity?
The mapping for hsci_mcore covers 77 of 81 RTL signals (alignment score 95.06) with 4 unmapped signals including xfer_active and menc_val. The area optimization is estimated to improve area by -15.0 and power by -10.0 but worsen delay by 5.0, a reasonable trade for a module with 518 operators, 206 lines of code, and cy...
github_repos/analogdevicesinc_hdl/library/axi_hsci/hsci_mcore.v
hsci_mcore
cross_stage_mapper+optimization_advisor+static_analyzer
[ {}, { "target_metric": "area" }, { "analysis_type": "full" } ]
[cross_stage_mapper {}] { "status": "success", "rtl_to_netlist_mapping": { "link_active": [ "link_active" ], "hsci_cmd_sel": [ "hsci_cmd_sel" ], "alink_txclk_inv": [ "alink_txclk_inv" ], "xfer_mode": [ "xfer_mode" ], "miso_ber_cnt": [ "miso ...[3549 ...
multi_tool
cross_stage_mapper+optimization_advisor+static_analyzer
compositional
78d8a379c235
[{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For the hsci_mcore module, how complete is the RTL-to-netlist mapping, and if I apply the recommended area optimization, what impact would it have on area, delay, and power given the module's current complexity? [cross_stage_mapper {}] { "status": "success", "rtl_to_netlist_mapping": { "link_active":...
1a45605da5e3
89663390db17
train
glm-5.3
3
3,300
{ "repository": "https://github.com/analogdevicesinc/hdl", "commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f", "path": "library/axi_hsci/hsci_mcore.v", "sha256": "8dd001da0bfead13841be67f253c166e1969699a596167984438fa1ecd3cad59" }
For mqnic_l2_egress, how do the area optimization trade-offs compare with what the code structure suggests about the design, and what improvement could the area-focused optimization achieve?
The area optimization for mqnic_l2_egress is estimated to reduce area by -15.0 and power by -10.0 at the cost of a 5.0 delay increase, mainly via mux sharing and aggressive resource sharing. Structurally, the module is purely combinational with 7 assign statements, 0 always blocks, and 0 regs across 187 lines of code, ...
github_repos/corundum_corundum/fpga/common/rtl/mqnic_l2_egress.v
mqnic_l2_egress
optimization_advisor+static_analyzer
[ { "target_metric": "area" }, { "analysis_type": "full" } ]
[optimization_advisor {"target_metric": "area"}] { "status": "success", "target_metric": "area", "recommended_recipes": [ "synth -top mqnic_l2_egress -flatten", "opt -full; share -aggressive; opt", "abc -g gates -liberty stdcells.lib", "opt_clean -purge" ], "optimization_suggestions": [ { ...
multi_tool
optimization_advisor+static_analyzer
compositional
aff58b41ff67
[{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For mqnic_l2_egress, how do the area optimization trade-offs compare with what the code structure suggests about the design, and what improvement could the area-focused optimization achieve? [optimization_advisor {"target_metric": "area"}] { "status": "success", "target_metric": "area", "recommended_re...
369b843868f7
8a09e47705da
train
glm-5.3
2
3,300
{ "repository": "https://github.com/corundum/corundum", "commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce", "path": "fpga/common/rtl/mqnic_l2_egress.v", "sha256": "4ccb720835b9e9fca9ec0b1b131375bc84ee7b74d65688f2626985e629f2db90" }
For the oh_clockgate module, how do the CDFG structure and the RTL-to-netlist signal mapping line up with its overall code complexity — can you give a brief summary covering the graph, the mapping coverage, and the complexity metrics?
oh_clockgate's CDFG has 7 nodes and 9 edges with an average degree of 1.29, made up of one $or, one $and, one oh_lat0 instance, 3 input ports and 1 output port. The RTL-to-netlist mapping only matched 3 of 6 RTL signals (alignment score 50.0, with en_sl, en_sh, and input unmapped), while the module itself has 3 inputs ...
github_repos/aolofsson_oh/stdlib/rtl/oh_clockgate.v
oh_clockgate
cross_stage_mapper+graph_extractor+static_analyzer
[ {}, { "graph_type": "CDFG" }, { "analysis_type": "full" } ]
[cross_stage_mapper {}] { "status": "success", "rtl_to_netlist_mapping": { "en_sl": [], "en": [ "en" ], "eclk": [ "eclk" ], "clk": [ "clk", "eclk" ], "en_sh": [], "input": [] }, "alignment_score": 50.0, "unmapped_elements": [ "en_sl", "en_sh"...
multi_tool
cross_stage_mapper+graph_extractor+static_analyzer
compositional
5d9fe3fb8f43
[{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For the oh_clockgate module, how do the CDFG structure and the RTL-to-netlist signal mapping line up with its overall code complexity — can you give a brief summary covering the graph, the mapping coverage, and the complexity metrics? [cross_stage_mapper {}] { "status": "success", "rtl_to_netlist_mapping...
49a57c4b7351
8a34e26dcee4
train
glm-5.3
3
3,300
{ "repository": "https://github.com/aolofsson/oh", "commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067", "path": "stdlib/rtl/oh_clockgate.v", "sha256": "92a4275f1541485b8298b222147d0c356470609ff77f83e7047ebbb0f57c316e" }
For the fifo_tb module, if I apply the recommended area optimization recipes, how much area and power improvement is estimated, and given that this is a 128-line testbench with 7 regs and 4 always blocks, is it worth pursuing?
The area optimization is estimated to reduce area by -15.0 and power by -10.0, at the cost of a 5.0 delay increase. Since fifo_tb is a testbench with 0 total ports, 7 regs and 4 always blocks, applying aggressive resource sharing (share -aggressive) is reasonable, though it may increase routing complexity and delay.
github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/storage/fifo_tb.v
fifo_tb
optimization_advisor+static_analyzer
[ { "target_metric": "area" }, { "analysis_type": "full" } ]
[optimization_advisor {"target_metric": "area"}] { "status": "success", "target_metric": "area", "recommended_recipes": [ "synth -top fifo_tb -flatten", "opt -full; share -aggressive; opt", "abc -g gates -liberty stdcells.lib", "opt_clean -purge" ], "optimization_suggestions": [ { "t...
multi_tool
optimization_advisor+static_analyzer
compositional
99fe8e9e71f9
[{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For the fifo_tb module, if I apply the recommended area optimization recipes, how much area and power improvement is estimated, and given that this is a 128-line testbench with 7 regs and 4 always blocks, is it worth pursuing? [optimization_advisor {"target_metric": "area"}] { "status": "success", "targe...
70f9d0830323
89fcbbeef589
train
glm-5.3
2
3,300
{ "repository": "https://github.com/pConst/basic_verilog", "commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614", "path": "Advanced Synthesis Cookbook/storage/fifo_tb.v", "sha256": "4d1a6373e7c4c549f803452d0888c856ea3c5d93dd7c558a15fc48e1bf83981b" }
For the retu_top module, how do the structural complexity results compare with the synthesis results for area, delay, and gate count, and what does this suggest about the module's implementation?
retu_top is a purely structural top level with 26 ports (18 inputs and 8 outputs), 26 wires, no always blocks or assign statements, cyclomatic complexity 1, and a single instantiation of smu_top. Synthesis reflects this by producing a gate count of just 1 (an unresolved smu_top cell) with area 1.0, delay and critical p...
github_repos/XUANTIE-RV_wujian100_open/soc/retu_top.v
retu_top
static_analyzer+synthesis_tool
[ { "analysis_type": "full" }, { "optimization_level": "medium" } ]
[static_analyzer {"analysis_type": "full"}] { "status": "success", "module_name": "retu_top", "port_count": { "inputs": 18, "outputs": 8, "inouts": 0, "total": 26 }, "signal_count": { "wires": 26, "regs": 0, "parameters": 0, "total": 26 }, "always_blocks": 0, "assign_stat...
multi_tool
static_analyzer+synthesis_tool
compositional
3c3556c54cf6
[{"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}]
Question: For the retu_top module, how do the structural complexity results compare with the synthesis results for area, delay, and gate count, and what does this suggest about the module's implementation? [static_analyzer {"analysis_type": "full"}] { "status": "success", "module_name": "retu_top", "port_count":...
52d38901572f
8a5d08948a94
train
glm-5.3
2
3,300
{ "repository": "https://github.com/XUANTIE-RV/wujian100_open", "commit": "83e297583bb3454b688f9f27d6bc20ff3276ad32", "path": "soc/retu_top.v", "sha256": "ee9fdebcd22742c23f7f66b617272fa62c845b9a2a2186720ef9c7ad68609e90" }
For the eth_phy_10g_tx_if module, how does its CDFG structure size compare to its source-level complexity, and is there anything in the static analysis that suggests a risk worth checking given the graph density?
The CDFG of eth_phy_10g_tx_if has 18 nodes and 1119 edges with an average degree of 62.17, while the source is 149 lines of code with cyclomatic complexity 12 and nesting depth 15 across 2 always blocks and 8 assign statements. Despite the high graph density, the static analysis reports no lint warnings and 7 total por...
github_repos/alexforencich_verilog-ethernet/rtl/eth_phy_10g_tx_if.v
eth_phy_10g_tx_if
graph_extractor+static_analyzer
[ { "graph_type": "CDFG" }, { "analysis_type": "full" } ]
[graph_extractor {"graph_type": "CDFG"}] { "status": "success", "graph_type": "CDFG", ...[26109 chars elided]... "node_count": 18, "edge_count": 1119, "graph_properties": { "node_types": { "$logic_and": 1, "$not": 2, "$dffe": 1, "$dff": 3, "$mux": 2, "lfsr": 2, "p...
multi_tool
graph_extractor+static_analyzer
compositional
3bdb7762ae3c
[{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For the eth_phy_10g_tx_if module, how does its CDFG structure size compare to its source-level complexity, and is there anything in the static analysis that suggests a risk worth checking given the graph density? [graph_extractor {"graph_type": "CDFG"}] { "status": "success", "graph_type": "CDFG", ...[26...
57c49b51f365
89af76450787
train
glm-5.3
2
3,300
{ "repository": "https://github.com/alexforencich/verilog-ethernet", "commit": "77320a9471d19c7dd383914bc049e02d9f4f1ffb", "path": "rtl/eth_phy_10g_tx_if.v", "sha256": "eb7b22ac57abbc4ee887ac945ac66507aeda06417c7dd188cd8e7a5e713f3ac4" }
For the axis_fifo module, how does its control/dataflow structure relate to its overall code complexity — specifically, what does the DFG analysis show about mux and register usage compared to the line count and cyclomatic complexity from the source-level analysis?
The DFG of axis_fifo contains 132 nodes and 1772 edges, with 52 $mux nodes plus 7 $sdffe, 2 $dffe, 1 $sdff and 1 $dff registers, reflecting the heavy branching in the source, which measures 409 lines of code and a cyclomatic complexity of 62. The static analysis also reports 5 always blocks and 48 assign statements wit...
github_repos/corundum_corundum/fpga/mqnic/IA_420F/fpga_100g/rtl/axis_fifo.v
axis_fifo
graph_extractor+static_analyzer
[ { "graph_type": "DFG" }, { "analysis_type": "full" } ]
[graph_extractor {"graph_type": "DFG"}] { "status": "success", "graph_type": "DFG", ...[57176 chars elided]... "node_count": 132, "edge_count": 1772, "graph_properties": { "node_types": { "$eq": 2, "$logic_or": 5, "$or": 1, "$mux": 52, "$logic_and": 8, "$logic_not": 3, ...
multi_tool
graph_extractor+static_analyzer
compositional
7c66a640beab
[{"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For the axis_fifo module, how does its control/dataflow structure relate to its overall code complexity — specifically, what does the DFG analysis show about mux and register usage compared to the line count and cyclomatic complexity from the source-level analysis? [graph_extractor {"graph_type": "DFG"}] { ...
9cf861198801
8a56f74ea4d9
train
glm-5.3
2
3,300
{ "repository": "https://github.com/corundum/corundum", "commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce", "path": "fpga/mqnic/IA_420F/fpga_100g/rtl/axis_fifo.v", "sha256": "b49606665dcef7805fd2cc42ee8514402898a0dee1af2df61dd0a2d332d19a28" }
For the bilbo_lfsr module, what area-oriented optimizations are recommended, how much area and power reduction is estimated, and what module characteristics (like port count and complexity) explain the routing-congestion trade-off mentioned?
For bilbo_lfsr, the recommended area recipes include aggressive resource sharing (share -aggressive) and mux optimization, with an estimated area improvement of -15.0 and power improvement of -10.0, at the cost of a 5.0 delay increase. The module has 4 total ports (3 inputs, 1 output), a cyclomatic complexity of 8, nes...
github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/random/bilbo_lfsr.v
bilbo_lfsr
optimization_advisor+static_analyzer
[ { "target_metric": "area" }, { "analysis_type": "full" } ]
[optimization_advisor {"target_metric": "area"}] { "status": "success", "target_metric": "area", "recommended_recipes": [ "synth -top bilbo_lfsr -flatten", "opt -full; share -aggressive; opt", "abc -g gates -liberty stdcells.lib", "opt_clean -purge" ], "optimization_suggestions": [ { ...
multi_tool
optimization_advisor+static_analyzer
compositional
4dc381bbd131
[{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For the bilbo_lfsr module, what area-oriented optimizations are recommended, how much area and power reduction is estimated, and what module characteristics (like port count and complexity) explain the routing-congestion trade-off mentioned? [optimization_advisor {"target_metric": "area"}] { "status": "suc...
397fa69ba89e
8a8e7cca9bf4
train
glm-5.3
2
3,300
{ "repository": "https://github.com/pConst/basic_verilog", "commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614", "path": "Advanced Synthesis Cookbook/random/bilbo_lfsr.v", "sha256": "cd34fdc670b64bdfd95684f1ee263ebc49844310292ec3411fa393b09e452e85" }
For eth_mac_quad_wrapper, how do its structural complexity from the source code and its post-synthesis results compare — is it a heavy block? Summarize using its ports and assigns, and its area, gate count, critical path delay, and power.
eth_mac_quad_wrapper is structurally simple: it has 59 total ports, 0 always blocks and 52 assign statements with a cyclomatic complexity of 2 over 310 lines of code. After synthesis it is a small, fast block with an area of 45.0, a gate count of 45, a critical path delay of 139.94, and power of 0.045.
github_repos/corundum_corundum/fpga/lib/eth/example/S10DX_DK/fpga_10g/rtl/eth_mac_quad_wrapper.v
eth_mac_quad_wrapper
static_analyzer+synthesis_tool
[ { "analysis_type": "full" }, { "optimization_level": "medium" } ]
[static_analyzer {"analysis_type": "full"}] { "status": "success", "module_name": "eth_mac_quad_wrapper", "port_count": { "inputs": 25, "outputs": 34, "inouts": 0, "total": 59 }, "signal_count": { "wires": 59, "regs": 0, "parameters": 1, "total": 59 }, "always_blocks": 0, ...
multi_tool
static_analyzer+synthesis_tool
compositional
e930bc757df1
[{"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}]
Question: For eth_mac_quad_wrapper, how do its structural complexity from the source code and its post-synthesis results compare — is it a heavy block? Summarize using its ports and assigns, and its area, gate count, critical path delay, and power. [static_analyzer {"analysis_type": "full"}] { "status": "success", ...
181e3b0a1eb4
8acfb10b6fd4
train
glm-5.3
2
3,300
{ "repository": "https://github.com/corundum/corundum", "commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce", "path": "fpga/lib/eth/example/S10DX_DK/fpga_10g/rtl/eth_mac_quad_wrapper.v", "sha256": "8f791e0327b0b071b54096258ad651b3cf9a0e56f0d2e6041511068c9a31ba5e" }
For the axis_fifo module, how well did the RTL-to-netlist mapping hold up when I look at the synthesized design's AIG representation — specifically, what alignment score and unmapped signal count did the mapping produce, and how do the sizes of the RTL and netlist compare given the AIG has 6788 nodes?
The mapping scored an alignment of 62.22 with 17 unmapped signals (28 of 45 RTL signals mapped) against 1169 netlist wires, while the synthesized AIG representation of axis_fifo contains 6788 nodes and 16534 edges with an average degree of 2.44. Notable unmapped elements include FIFO, pause_reg, full_wr, and out_fifo_h...
github_repos/corundum_corundum/fpga/mqnic/IA_420F/fpga_100g/rtl/axis_fifo.v
axis_fifo
cross_stage_mapper+graph_extractor
[ {}, { "graph_type": "AIG" } ]
[cross_stage_mapper {}] { "status": "success", "rtl_to_netlist_mapping": { "rst": [ "rst" ], "wire": [], "m_axis_tvalid": [ "m_axis_tvalid_out", "m_axis_tvalid_pipe", "m_axis_tvalid" ], "s_axis_tlast": [ "s_axis_tlast" ], "status_overflow": [ "stat...
multi_tool
cross_stage_mapper+graph_extractor
compositional
786118dffa85
[{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}]
Question: For the axis_fifo module, how well did the RTL-to-netlist mapping hold up when I look at the synthesized design's AIG representation — specifically, what alignment score and unmapped signal count did the mapping produce, and how do the sizes of the RTL and netlist compare given the AIG has 6788 nodes? [cross...
bdde9e97fcdb
8a56f74ea4d9
train
glm-5.3
2
3,300
{ "repository": "https://github.com/corundum/corundum", "commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce", "path": "fpga/mqnic/IA_420F/fpga_100g/rtl/axis_fifo.v", "sha256": "b49606665dcef7805fd2cc42ee8514402898a0dee1af2df61dd0a2d332d19a28" }
For the ad_datafmt module, the power-focused optimization run suggests clock gating and operand isolation with estimated area, delay, and power changes of 5.0, 5.0, and -25.0 respectively, while the full static analysis reports 5 inputs, 1 output, 45 lines of code, and a cyclomatic complexity of 5. Is applying the reco...
Yes, applying the clock-gating and operand-isolation suggestions is worthwhile for ad_datafmt because the estimated power change is -25.0 at only a 5.0 area and 5.0 delay cost. The static analysis shows the module is small and manageable (5 inputs, 1 output, 45 lines of code, cyclomatic complexity 5), and its single al...
github_repos/analogdevicesinc_hdl/library/common/ad_datafmt.v
ad_datafmt
optimization_advisor+static_analyzer
[ { "target_metric": "power" }, { "analysis_type": "full" } ]
[optimization_advisor {"target_metric": "power"}] { "status": "success", "target_metric": "power", "recommended_recipes": [ "synth -top ad_datafmt", "opt; share; opt", "abc -g gates -liberty stdcells.lib", "opt_clean; clockgate" ], "optimization_suggestions": [ { "type": "clock_gatin...
multi_tool
optimization_advisor+static_analyzer
compositional
4b6eb9b7f5ab
[{"tool": "optimization_advisor", "parameters": {"target_metric": "power"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}]
Question: For the ad_datafmt module, the power-focused optimization run suggests clock gating and operand isolation with estimated area, delay, and power changes of 5.0, 5.0, and -25.0 respectively, while the full static analysis reports 5 inputs, 1 output, 45 lines of code, and a cyclomatic complexity of 5. Is applyin...
163d1712e1d1
8b1ce56386f6
train
glm-5.3
2
3,300
{ "repository": "https://github.com/analogdevicesinc/hdl", "commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f", "path": "library/common/ad_datafmt.v", "sha256": "de24bdd0e3a27f2888c408339c4d6ab94cb75bcdb2dbab9dc9bfcf70072ec470" }
For the module axi_ad9361_tdd, how do its structural complexity and timing characteristics compare: what does the DFG analysis show, how complex is the RTL code, and what delay and area did the medium-level delay-oriented synthesis optimization achieve?
The DFG for axi_ad9361_tdd has 30 nodes and 1436 edges with an average degree of 47.87, while the RTL itself is moderately sized at 179 lines of code with a cyclomatic complexity of 8 and nesting depth of 9. Synthesis with medium-level optimization yielded a delay of 86.31, an area of 7.5, a power of 0.008, and a gate ...
github_repos/analogdevicesinc_hdl/library/axi_ad9361/axi_ad9361_tdd.v
axi_ad9361_tdd
graph_extractor+static_analyzer+synthesis_tool
[ { "graph_type": "DFG" }, { "analysis_type": "full" }, { "optimization_level": "medium" } ]
[graph_extractor {"graph_type": "DFG"}] { "status": "success", "graph_type": "DFG", ...[26144 chars elided]... "node_count": 30, "edge_count": 1436, "graph_properties": { "node_types": { "$not": 1, "$logic_and": 2, "$sdff": 3, "ad_tdd_control": 1, "up_tdd_cntrl": 1, "po...
multi_tool
graph_extractor+static_analyzer+synthesis_tool
compositional
080a20e46845
[{"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}]
Question: For the module axi_ad9361_tdd, how do its structural complexity and timing characteristics compare: what does the DFG analysis show, how complex is the RTL code, and what delay and area did the medium-level delay-oriented synthesis optimization achieve? [graph_extractor {"graph_type": "DFG"}] { "status": "...
f54187efc0a6
8b3baeeb51bc
train
glm-5.3
3
3,300
{ "repository": "https://github.com/analogdevicesinc/hdl", "commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f", "path": "library/axi_ad9361/axi_ad9361_tdd.v", "sha256": "6ec902636a9cf0573fb3a3ea9e8aa08679b09df7045b95f330a694169d34ba03" }