question string | answer string | source_file string | module_name string | tool_name string | tool_parameters list | tool_result string | category string | subcategory string | difficulty string | question_hash string | stage1_target string | stage2_context string | plan_id string | design_id string | split string | writer_model string | n_calls int64 | ctx_cap int64 | source dict |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For the ip module, how well did the RTL signals survive into the netlist according to the cross-stage mapping, and if I apply the recommended area-focused optimization, what area and delay impact should I expect and what is the associated trade-off? | The mapping for ip covers 78 of 86 RTL signals with an alignment score of 90.7, leaving 8 signals like arp_response_ready_reg and state_reg unmapped. The area optimization is estimated to reduce area by -15.0 while increasing delay by 5.0. The noted trade-off is that area optimization may increase delay and aggressive ... | github_repos/alexforencich_verilog-ethernet/rtl/ip.v | ip | cross_stage_mapper+optimization_advisor | [
{},
{
"target_metric": "area"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"local_mac": [
"local_mac"
],
"arp_response_ready_reg": [],
"wire": [],
"s_eth_dest_mac": [
"s_eth_dest_mac"
],
"arp_response_ready": [
"arp_response_ready_next",
"arp_response_ready"
]... | multi_tool | cross_stage_mapper+optimization_advisor | compositional | a35d6f2a0050 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}] | Question: For the ip module, how well did the RTL signals survive into the netlist according to the cross-stage mapping, and if I apply the recommended area-focused optimization, what area and delay impact should I expect and what is the associated trade-off?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_... | e397d07ecaa7 | 9c7e509ddf47 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/alexforencich/verilog-ethernet",
"commit": "77320a9471d19c7dd383914bc049e02d9f4f1ffb",
"path": "rtl/ip.v",
"sha256": "ec609c681edf22a1bcf803255dceeffe4b668b541bce00105e7c0cdaec710c42"
} |
For util_rfifo, how does the RTL-to-netlist signal mapping coverage relate to the module's CDFG structure and its overall code complexity, and what does this suggest about verification confidence? | The RTL had 68 signals of which 56 mapped and 12 remained unmapped (alignment score 82.35), while the CDFG extracted from util_rfifo contains 128 nodes and 2511 edges with an average degree of 19.62, and the static analysis reports a cyclomatic complexity of 42 across 321 lines of code with 11 always blocks. The high g... | github_repos/analogdevicesinc_hdl/library/util_rfifo/util_rfifo.v | util_rfifo | cross_stage_mapper+graph_extractor+static_analyzer | [
{},
{
"graph_type": "CDFG"
},
{
"analysis_type": "full"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"din_init": [],
"dout_valid_out_5": [
"dout_valid_out_5"
],
"din_valid_4": [
"din_valid_4"
],
"din_enable_0": [
"din_enable_0"
],
"din_valid_in_2": [
"din_valid_in_2"
],
...[2816 ... | multi_tool | cross_stage_mapper+graph_extractor+static_analyzer | compositional | e86a02e35fc7 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For util_rfifo, how does the RTL-to-netlist signal mapping coverage relate to the module's CDFG structure and its overall code complexity, and what does this suggest about verification confidence?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"din_init": [],
"dout_val... | 792c2c19f007 | 9c2ffaef3c8d | train | glm-5.3 | 3 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/util_rfifo/util_rfifo.v",
"sha256": "822bf91e7fabbb4984514cf0cc1ed48107eb1ca36d5472b2386174382e950d7e"
} |
For the sync_reset module, the lint check came back clean, but how do the structural analysis results (port and signal counts, always block count) line up with what synthesis produced in terms of gates, area, delay, and power, and does anything look inconsistent? | The static analysis of sync_reset shows 3 total ports (2 inputs, 1 output), 3 signals, 1 always block, and 1 assign statement with no lint warnings, and synthesis of this small sequential design yields just 2 $_DFF_PP1_ flip-flops with an area of 2.0, a delay/critical path of 61.56, and power of 0.002. The two DFF cell... | github_repos/corundum_corundum/fpga/lib/pcie/example/ZCU106/fpga/rtl/sync_reset.v | sync_reset | static_analyzer+synthesis_tool | [
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "sync_reset",
"port_count": {
"inputs": 2,
"outputs": 1,
"inouts": 0,
"total": 3
},
"signal_count": {
"wires": 3,
"regs": 0,
"parameters": 1,
"total": 3
},
"always_blocks": 1,
"assign_statem... | multi_tool | static_analyzer+synthesis_tool | compositional | c24a51644495 | [{"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the sync_reset module, the lint check came back clean, but how do the structural analysis results (port and signal counts, always block count) line up with what synthesis produced in terms of gates, area, delay, and power, and does anything look inconsistent?
[static_analyzer {"analysis_type": "full"}]
{... | af24744ecd17 | 9c4df79a33d8 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/pcie/example/ZCU106/fpga/rtl/sync_reset.v",
"sha256": "67ea2e751ee7cdf5c7528902eab32a63f11bd090e1380934fd7334b361c7d874"
} |
For the adrv9001_tx_link module, how do its structural complexity metrics relate to the delay-optimization advice — is the suggested pipelining reasonable, and what trade-offs should I expect? | The adrv9001_tx_link module is fairly complex, with 154 lines of code, cyclomatic complexity 16, nesting depth 16, 500 operators across 4 always blocks and 18 assign statements, so pipelining the arithmetic operations via register retiming is a sensible delay reduction. The estimated improvement is a delay reduction of... | github_repos/analogdevicesinc_hdl/library/axi_adrv9001/adrv9001_tx_link.v | adrv9001_tx_link | optimization_advisor+static_analyzer | [
{
"target_metric": "delay"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metric": "delay",
"recommended_recipes": [
"synth -top adrv9001_tx_link",
"opt -fast",
"abc -fast -liberty stdcells.lib",
"opt_clean"
],
"optimization_suggestions": [
{
"type": "pipeline_insertion",
... | multi_tool | optimization_advisor+static_analyzer | compositional | b097f2e84ad4 | [{"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the adrv9001_tx_link module, how do its structural complexity metrics relate to the delay-optimization advice — is the suggested pipelining reasonable, and what trade-offs should I expect?
[optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metric": "delay",
"recommende... | 9935fe115ed9 | 9c87d1dddcfb | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/axi_adrv9001/adrv9001_tx_link.v",
"sha256": "8a04b09ead3ef915cbedd2cf808c93e23f5c72f5a9461b223ef992997e9a87c2"
} |
For tim5_sec_top, how does the structural composition (instantiated submodules and port/signal counts) relate to the synthesis results for area, delay, and power at medium optimization? | tim5_sec_top is a purely structural top level with 25 inputs and 6 outputs (31 total ports), 36 wires, 0 always blocks, and 3 assign statements, instantiating timers_top, documentation, and tim5_tim_top. Synthesis with medium optimization reflects this hierarchy, keeping only 2 gates (one timers_top and one tim5_tim_to... | github_repos/XUANTIE-RV_wujian100_open/soc/tim5.v | tim5_sec_top | static_analyzer+synthesis_tool | [
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "tim5_sec_top",
"port_count": {
"inputs": 25,
"outputs": 6,
"inouts": 0,
"total": 31
},
"signal_count": {
"wires": 36,
"regs": 0,
"parameters": 0,
"total": 36
},
"always_blocks": 0,
"assign_... | multi_tool | static_analyzer+synthesis_tool | compositional | deaf0f0a560c | [{"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For tim5_sec_top, how does the structural composition (instantiated submodules and port/signal counts) relate to the synthesis results for area, delay, and power at medium optimization?
[static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "tim5_sec_top",
"port_count": {
... | db6c91d64446 | 9cff5c736bcb | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/XUANTIE-RV/wujian100_open",
"commit": "83e297583bb3454b688f9f27d6bc20ff3276ad32",
"path": "soc/tim5.v",
"sha256": "f2c0d5485a3639150f082888c337805926f095f11303bd0e376e7ad3c7b84dbe"
} |
For dma_if_mux_rd, how does its structure (based on the CDFG with 38 nodes and 936 edges) relate to the area-optimization recommendations, and what trade-offs should I expect if I apply aggressive resource sharing? | The CDFG of dma_if_mux_rd has 38 nodes and 936 edges with an average degree of 24.63, dominated by port_input nodes (19) and port_output nodes (17), plus one dma_if_desc_mux and one dma_ram_demux_wr instance; given that dense connectivity, aggressive resource sharing (share -aggressive) is recommended to cut area by an... | github_repos/corundum_corundum/fpga/lib/pcie/rtl/dma_if_mux_rd.v | dma_if_mux_rd | graph_extractor+optimization_advisor | [
{
"graph_type": "CDFG"
},
{
"target_metric": "area"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[37904 chars elided]...
"node_count": 38,
"edge_count": 936,
"graph_properties": {
"node_types": {
"dma_if_desc_mux": 1,
"dma_ram_demux_wr": 1,
"port_input": 19,
"port_output": 17
},
"a... | multi_tool | graph_extractor+optimization_advisor | compositional | 69b559d621c2 | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}] | Question: For dma_if_mux_rd, how does its structure (based on the CDFG with 38 nodes and 936 edges) relate to the area-optimization recommendations, and what trade-offs should I expect if I apply aggressive resource sharing?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[... | a0f2e3aecc8c | 9dfa81e16d1f | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/pcie/rtl/dma_if_mux_rd.v",
"sha256": "9a8baf220a009c8fa1105026835a3d7a4419a32a40a9ff5b16185c14ce1572a7"
} |
For the module ct_spsram_512x59, based on its CDFG structure (8 nodes, 189 edges) and the area-focused optimization advice, is aggressive resource sharing worthwhile, and what are the trade-offs? | The CDFG for ct_spsram_512x59 has 8 nodes, 189 edges, and an average degree of 23.62, indicating dense connectivity, so aggressive sharing (share -aggressive) could yield an estimated area improvement of -15.0 and power improvement of -10.0. However, the delay penalty is 5.0, and the dense graph plus the noted trade-of... | github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/ifu/rtl/ct_spsram_512x59.v | ct_spsram_512x59 | graph_extractor+optimization_advisor | [
{
"graph_type": "CDFG"
},
{
"target_metric": "area"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[19991 chars elided]...
"node_count": 8,
"edge_count": 189,
"graph_properties": {
"node_types": {
"ct_f_spsram_512x59": 1,
"port_input": 6,
"port_output": 1
},
"avg_degree": 23.62,
"modul... | multi_tool | graph_extractor+optimization_advisor | compositional | 1029db282a1d | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}] | Question: For the module ct_spsram_512x59, based on its CDFG structure (8 nodes, 189 edges) and the area-focused optimization advice, is aggressive resource sharing worthwhile, and what are the trade-offs?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[19991 chars elided]... | 13ab6a3ed03c | 9e2fab7e73bb | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/XUANTIE-RV/openc910",
"commit": "b91c90914c19f114d35c8f6b73408eb241ed847c",
"path": "C910_RTL_FACTORY/gen_rtl/ifu/rtl/ct_spsram_512x59.v",
"sha256": "327babd0b63a0691fc7a12d4efc5f7ba99559966becf539544504b3d482ce99b"
} |
For the ct_ifu_icache_if module, how do the structural complexity measures (always blocks, assign statements, nesting depth) compare with the synthesized gate-level results, and does the elaborated design match the RTL instantiation list? | The RTL of ct_ifu_icache_if is mostly combinational, with 63 assign statements and only 4 always blocks containing 2 registers, and it reaches a nesting depth of 7 across 651 lines of code; synthesis produced 429 gates at area 513.0, delay 311.7, and power 0.429, including 2 $_DFFE_PN0P_ flip-flops matching the 2 regs.... | github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/ifu/rtl/ct_ifu_icache_if.v | ct_ifu_icache_if | static_analyzer+synthesis_tool | [
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "ct_ifu_icache_if",
"port_count": {
"inputs": 32,
"outputs": 7,
"inouts": 0,
"total": 39
},
"signal_count": {
"wires": 78,
"regs": 2,
"parameters": 1,
"total": 80
},
"always_blocks": 4,
"ass... | multi_tool | static_analyzer+synthesis_tool | compositional | fa6400fa65e3 | [{"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the ct_ifu_icache_if module, how do the structural complexity measures (always blocks, assign statements, nesting depth) compare with the synthesized gate-level results, and does the elaborated design match the RTL instantiation list?
[static_analyzer {"analysis_type": "full"}]
{
"status": "success",
... | b47364c5288a | 9e50313359ea | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/XUANTIE-RV/openc910",
"commit": "b91c90914c19f114d35c8f6b73408eb241ed847c",
"path": "C910_RTL_FACTORY/gen_rtl/ifu/rtl/ct_ifu_icache_if.v",
"sha256": "0683ba185db513af5ca81d4c92a7116a09e1234f1d62e81c59668c8fa2474b59"
} |
For the testbench module, how do the recommended area-optimization recipes and their estimated trade-offs fit with the module's size and structure, and what should I watch out for if I apply them? | For testbench, the area-oriented flow (flatten, opt -full with share -aggressive, and mapping to gates) is estimated to improve area by -15.0 and power by -10.0 at the cost of a delay increase of 5.0, mainly because aggressive sharing increases routing complexity. The module itself is small and structural, with 14 tota... | github_repos/aolofsson_oh/stdlib/testbench/testbench.v | testbench | optimization_advisor+static_analyzer | [
{
"target_metric": "area"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommended_recipes": [
"synth -top testbench -flatten",
"opt -full; share -aggressive; opt",
"abc -g gates -liberty stdcells.lib",
"opt_clean -purge"
],
"optimization_suggestions": [
{
... | multi_tool | optimization_advisor+static_analyzer | compositional | 3ccc091c5977 | [{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the testbench module, how do the recommended area-optimization recipes and their estimated trade-offs fit with the module's size and structure, and what should I watch out for if I apply them?
[optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommen... | 01e143cb31c2 | 9eb44b147830 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "stdlib/testbench/testbench.v",
"sha256": "c13ae6789c0d9b7f2d9bb0a9fae4e17e34e8ac7625a9823ee690c07eab83d12f"
} |
For the module axi_ad35xxr_if, how does its control/dataflow structure (CDFG) size compare with the source-level complexity, and do the port counts in the CDFG match the declared port counts? | The CDFG for axi_ad35xxr_if has 213 nodes and 4791 edges (average degree 22.49), which is consistent with the high source-level complexity of 316 lines of code, cyclomatic complexity 73, and 1011 operators. However, the CDFG lists 15 input ports and 8 output ports while the source declares 13 inputs and 6 outputs, a di... | github_repos/analogdevicesinc_hdl/library/axi_ad35xxr/axi_ad35xxr_if.v | axi_ad35xxr_if | graph_extractor+static_analyzer | [
{
"graph_type": "CDFG"
},
{
"analysis_type": "full"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[60323 chars elided]...
"node_count": 213,
"edge_count": 4791,
"graph_properties": {
"node_types": {
"$and": 6,
"$not": 5,
"$mux": 80,
"$or": 6,
"$logic_or": 7,
"$logic_and": 8,
... | multi_tool | graph_extractor+static_analyzer | compositional | b200ffcc3242 | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the module axi_ad35xxr_if, how does its control/dataflow structure (CDFG) size compare with the source-level complexity, and do the port counts in the CDFG match the declared port counts?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[60323 chars elided]...
... | 658bbb3c974b | 9eda204fab54 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/axi_ad35xxr/axi_ad35xxr_if.v",
"sha256": "720060d3413ea3f679db929a5749c280a70f7ceb0a231a487ec00d26f0b527e3"
} |
For the oh_shift module, the area-focused optimization flow suggests aggressive resource sharing — given the module's complexity and structure, is that a reasonable choice, and what trade-offs should I expect? | oh_shift is small and purely combinational (36 lines of code, cyclomatic complexity 3, 5 assign statements, no always blocks, 2 input ports), so the aggressive sharing recipes like share -aggressive and mux optimization are a reasonable fit for an area target. The estimated improvement is -15.0 for area and -10.0 for p... | github_repos/aolofsson_oh/stdlib/rtl/oh_shift.v | oh_shift | optimization_advisor+static_analyzer | [
{
"target_metric": "area"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommended_recipes": [
"synth -top oh_shift -flatten",
"opt -full; share -aggressive; opt",
"abc -g gates -liberty stdcells.lib",
"opt_clean -purge"
],
"optimization_suggestions": [
{
"... | multi_tool | optimization_advisor+static_analyzer | compositional | 1eb094431d4c | [{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the oh_shift module, the area-focused optimization flow suggests aggressive resource sharing — given the module's complexity and structure, is that a reasonable choice, and what trade-offs should I expect?
[optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area"... | 1bd3ea5a7068 | 9e9d4f34fd5f | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "stdlib/rtl/oh_shift.v",
"sha256": "a6088988dc60f67a90c40286074cc728c32e5aa8752369bae127e53a56e8984c"
} |
For the oh_shift module, the RTL-to-netlist mapping reports a 100.0 alignment score with 2 mapped RTL signals, and the power-optimized synthesis run reports area, delay, and power figures—can you summarize how the RTL mapping lines up with the synthesized netlist and quote the key implementation cost numbers? | The RTL-to-netlist mapping for oh_shift was fully successful, mapping both RTL signals (arithmetic and right) with a 100.0 alignment score and no unmapped elements, while the netlist contains 926 wires. The synthesized implementation has an area of 901.0, a delay and critical path estimate of 341.53, a power of 0.861, ... | github_repos/aolofsson_oh/stdlib/rtl/oh_shift.v | oh_shift | cross_stage_mapper+synthesis_tool | [
{},
{
"optimization_level": "medium"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"arithmetic": [
"arithmetic"
],
"right": [
"right"
]
},
"alignment_score": 100.0,
"unmapped_elements": [],
"mapping_statistics": {
"rtl_signals": 2,
"netlist_wires": 926,
"netlist_cells": 0,
... | multi_tool | cross_stage_mapper+synthesis_tool | compositional | 2679cbc5b5ef | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the oh_shift module, the RTL-to-netlist mapping reports a 100.0 alignment score with 2 mapped RTL signals, and the power-optimized synthesis run reports area, delay, and power figures—can you summarize how the RTL mapping lines up with the synthesized netlist and quote the key implementation cost numbers?... | 15d118e12532 | 9e9d4f34fd5f | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "stdlib/rtl/oh_shift.v",
"sha256": "a6088988dc60f67a90c40286074cc728c32e5aa8752369bae127e53a56e8984c"
} |
For the axis_eth_fcs module, considering its AIG structure and the power-focused optimization analysis, how many enable-style flip-flops does the graph contain and what power saving is estimated if the suggested clock gating is applied? | The AIG for axis_eth_fcs contains 32 $_SDFFE_PP1P_ flip-flops and 32 $_DFFE_PP_ flip-flops (plus 1 $_SDFF_PP0_), which are good candidates for clock gating; the power optimization analysis estimates a power improvement of -25.0, at the cost of some area overhead since area is only estimated to improve by 5.0. | github_repos/corundum_corundum/fpga/lib/eth/rtl/axis_eth_fcs.v | axis_eth_fcs | graph_extractor+optimization_advisor | [
{
"graph_type": "AIG"
},
{
"target_metric": "power"
}
] | [graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_type": "AIG",
...[33109 chars elided]...
"node_count": 345,
"edge_count": 1003,
"graph_properties": {
"node_types": {
"$_AND_": 101,
"$_NOT_": 168,
"$_SDFFE_PP1P_": 32,
"$_DFFE_PP_": 32,
"$_SDFF_PP0_": 1,
... | multi_tool | graph_extractor+optimization_advisor | compositional | 255510ffe7f7 | [{"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "power"}}] | Question: For the axis_eth_fcs module, considering its AIG structure and the power-focused optimization analysis, how many enable-style flip-flops does the graph contain and what power saving is estimated if the suggested clock gating is applied?
[graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"grap... | bad373081165 | 9f27a68b987d | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/eth/rtl/axis_eth_fcs.v",
"sha256": "9aba0ff55de115dcab4a2f3ed46bf967bf5fb1eb8011bffcbd5842bf2e37a731"
} |
For the ip_eth_tx_64 module, considering its CDFG structure and the power-focused optimization analysis, is applying the suggested clock gating worthwhile, and what complexity does the graph structure add? | The CDFG of ip_eth_tx_64 has 312 nodes and 5893 edges with 29 $dffe, 7 $sdff, and 4 $sdffe registers spread across 121 $mux and 25 $pmux nodes, so clock gating the registers is well justified by the estimated power improvement of -25.0 (along with 5.0 in area and 5.0 in delay). However, the trade-offs note that clock g... | github_repos/corundum_corundum/fpga/lib/eth/rtl/ip_eth_tx_64.v | ip_eth_tx_64 | graph_extractor+optimization_advisor | [
{
"graph_type": "CDFG"
},
{
"target_metric": "power"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[60126 chars elided]...
"node_count": 312,
"edge_count": 5893,
"graph_properties": {
"node_types": {
"$logic_and": 12,
"$logic_not": 10,
"$add": 12,
"$sub": 2,
"$not": 4,
"$ge": 1,
... | multi_tool | graph_extractor+optimization_advisor | compositional | 4908a0aed7c6 | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "power"}}] | Question: For the ip_eth_tx_64 module, considering its CDFG structure and the power-focused optimization analysis, is applying the suggested clock gating worthwhile, and what complexity does the graph structure add?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[60126 cha... | 9e930eecb481 | 9ecaad5a7278 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/eth/rtl/ip_eth_tx_64.v",
"sha256": "ec717dc691fc9ede23ec9e593aad84683c68efd245fe088c1ecab18eb74b1e8e"
} |
For axi_ad35xxr_if, how large is the module in its AIG representation, and given that the delay-focused optimization suggestions estimate a delay improvement of -20.0, what trade-offs should I expect? | In the AIG for axi_ad35xxr_if there are 12570 nodes and 30688 edges, dominated by 7219 $_NOT_ and 5090 $_AND_ gates with 194 $_DFFE_PP_ registers. The delay optimization is estimated to improve delay by -20.0 with an area increase of 10.0 and power increase of 5.0. So the main trade-offs are increased area and higher p... | github_repos/analogdevicesinc_hdl/library/axi_ad35xxr/axi_ad35xxr_if.v | axi_ad35xxr_if | graph_extractor+optimization_advisor | [
{
"graph_type": "AIG"
},
{
"target_metric": "delay"
}
] | [graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_type": "AIG",
...[33892 chars elided]...
"node_count": 12570,
"edge_count": 30688,
"graph_properties": {
"node_types": {
"$_AND_": 5090,
"$_NOT_": 7219,
"$_DFF_P_": 1,
"$_SDFFE_PP0P_": 27,
"$_SDFFE_PP1P_": ... | multi_tool | graph_extractor+optimization_advisor | compositional | 15911e152bf0 | [{"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}] | Question: For axi_ad35xxr_if, how large is the module in its AIG representation, and given that the delay-focused optimization suggestions estimate a delay improvement of -20.0, what trade-offs should I expect?
[graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_type": "AIG",
...[33892 chars elid... | 45b64bc4e46b | 9eda204fab54 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/axi_ad35xxr/axi_ad35xxr_if.v",
"sha256": "720060d3413ea3f679db929a5749c280a70f7ceb0a231a487ec00d26f0b527e3"
} |
For decode_8b10b, given its purely combinational structure and the suggested area-focused optimization flow, how would applying those area optimizations affect timing and power, and does the module's complexity justify such aggressive sharing? | decode_8b10b is purely combinational (0 always blocks, 5 assign statements, 850 operators across 106 wires), so the recommended area flow (share -aggressive, muxcover, abc -g gates) fits its heavy operator usage. The estimated improvement is -15.0 area and -10.0 power, but delay increases by 5.0 because area optimizati... | github_repos/pConst_basic_verilog/encdec_8b10b.v | decode_8b10b | optimization_advisor+static_analyzer | [
{
"target_metric": "area"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommended_recipes": [
"synth -top decode_8b10b -flatten",
"opt -full; share -aggressive; opt",
"abc -g gates -liberty stdcells.lib",
"opt_clean -purge"
],
"optimization_suggestions": [
{
... | multi_tool | optimization_advisor+static_analyzer | compositional | 63727e272a8a | [{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For decode_8b10b, given its purely combinational structure and the suggested area-focused optimization flow, how would applying those area optimizations affect timing and power, and does the module's complexity justify such aggressive sharing?
[optimization_advisor {"target_metric": "area"}]
{
"status": "s... | 1ab390141595 | 9f5109790371 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "encdec_8b10b.v",
"sha256": "9c02451501e9f31f59d8a6cae46726a368ccd3a2bd083df99e6c49dc215c0a50"
} |
For sys_pll_0002, the RTL-to-netlist mapping shows one unmapped signal while the DFG shows the full port structure — do the port counts and signal mappings agree with each other and with the synthesized netlist? | The DFG for sys_pll_0002 contains 6 nodes and 6 edges, with 2 input ports and 3 output ports, and the mapping reports 6 RTL signals of which 5 mapped to netlist wires with only 'wire' left unmapped and an alignment score of 83.33. The synthesis results are consistent, showing a single altera_pll cell with a wire count ... | github_repos/pConst_basic_verilog/example_projects/quartus_test_prj_template_v4/ip/sys_pll/sys_pll/sys_pll_0002.v | sys_pll_0002 | cross_stage_mapper+graph_extractor+synthesis_tool | [
{},
{
"graph_type": "DFG"
},
{
"optimization_level": "medium"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"locked": [
"locked"
],
"rst": [
"rst"
],
"wire": [],
"outclk_1": [
"outclk_1"
],
"outclk_0": [
"outclk_0"
],
"refclk": [
"refclk"
]
},
"alignment_score": 83.33,
... | multi_tool | cross_stage_mapper+graph_extractor+synthesis_tool | compositional | b4b9b9f03b55 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For sys_pll_0002, the RTL-to-netlist mapping shows one unmapped signal while the DFG shows the full port structure — do the port counts and signal mappings agree with each other and with the synthesized netlist?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"locked": [
... | f577de988540 | 9ff400b32531 | train | glm-5.3 | 3 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "example_projects/quartus_test_prj_template_v4/ip/sys_pll/sys_pll/sys_pll_0002.v",
"sha256": "169ddce38784f9c55dccad652f184bf057b3cde38a1fe5e2d68c6af331185ce4"
} |
For the test_eth_mac_10g_fifo_ptp_64 module, how does the delay-focused optimization advice relate to what the code analysis shows about its structure and size? | The delay optimization for test_eth_mac_10g_fifo_ptp_64 suggests register retiming and logic duplication, estimating delay reduced by -20.0 percent at the cost of 10.0 percent more area and 5.0 percent more power. This applies to a fairly simple file of 234 lines of code with cyclomatic complexity 2, nesting depth 1, a... | github_repos/alexforencich_verilog-ethernet/tb/test_eth_mac_10g_fifo_ptp_64.v | test_eth_mac_10g_fifo_ptp_64 | optimization_advisor+static_analyzer | [
{
"target_metric": "delay"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metric": "delay",
"recommended_recipes": [
"synth -top test_eth_mac_10g_fifo_ptp_64",
"opt -fast",
"abc -fast -liberty stdcells.lib",
"opt_clean"
],
"optimization_suggestions": [
{
"type": "pipeline_inse... | multi_tool | optimization_advisor+static_analyzer | compositional | 6b7ee93a0107 | [{"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the test_eth_mac_10g_fifo_ptp_64 module, how does the delay-focused optimization advice relate to what the code analysis shows about its structure and size?
[optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metric": "delay",
"recommended_recipes": [
"synth -top te... | b803ef281551 | 9f6b5d7c47f4 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/alexforencich/verilog-ethernet",
"commit": "77320a9471d19c7dd383914bc049e02d9f4f1ffb",
"path": "tb/test_eth_mac_10g_fifo_ptp_64.v",
"sha256": "27e8f8ff526755cdc8d7d7aa6dfb0671cdf0b630323b2d988f44de191ef757db"
} |
For the test_arp module, given its current complexity metrics, is applying aggressive resource sharing for area reduction a good idea, and what trade-offs should I expect? | test_arp has 67 operators across 160 lines of code, so sharing arithmetic operators is a reasonable way to cut area, with an estimated area reduction of -15.0 and power reduction of -10.0. However, the aggressive sharing increases routing complexity and the estimated delay penalty is 5.0, so timing closure should be wa... | github_repos/corundum_corundum/fpga/lib/eth/tb/test_arp.v | test_arp | optimization_advisor+static_analyzer | [
{
"target_metric": "area"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommended_recipes": [
"synth -top test_arp -flatten",
"opt -full; share -aggressive; opt",
"abc -g gates -liberty stdcells.lib",
"opt_clean -purge"
],
"optimization_suggestions": [
{
"... | multi_tool | optimization_advisor+static_analyzer | compositional | 5e94c94c8eb5 | [{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the test_arp module, given its current complexity metrics, is applying aggressive resource sharing for area reduction a good idea, and what trade-offs should I expect?
[optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommended_recipes": [
"synt... | 35ab9a01643f | 9f7adc926a87 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/eth/tb/test_arp.v",
"sha256": "1188e6fa6d22745f6849eb5c3d58be7aaee78d09b595d1dd5c6fd2ab92d38df0"
} |
For the two_to_one module, how large is its AIG representation and does the delay-focused optimization advice seem worth pursuing given its trade-offs? | The AIG for two_to_one contains 1154 nodes and 2955 edges with an average degree of 2.56, including 459 AND nodes, 619 NOT nodes, and 68 DFFE flip-flops. The delay optimization is estimated to improve delay by -20.0 but at the cost of 10.0 more area and 5.0 more power, so it mainly makes sense if timing closure on this... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/communication/two_to_one.v | two_to_one | graph_extractor+optimization_advisor | [
{
"graph_type": "AIG"
},
{
"target_metric": "delay"
}
] | [graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_type": "AIG",
...[33437 chars elided]...
"node_count": 1154,
"edge_count": 2955,
"graph_properties": {
"node_types": {
"$_AND_": 459,
"$_NOT_": 619,
"$_DFFE_PP0P_": 68,
"port_input": 5,
"port_output": 3
... | multi_tool | graph_extractor+optimization_advisor | compositional | 3cb3ef0e530e | [{"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}] | Question: For the two_to_one module, how large is its AIG representation and does the delay-focused optimization advice seem worth pursuing given its trade-offs?
[graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_type": "AIG",
...[33437 chars elided]...
"node_count": 1154,
"edge_count": 2955... | d2d46b716f16 | a04df587f249 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/communication/two_to_one.v",
"sha256": "89fa892a2ead982248580b7de7b0803f91202453a8d2c95bcdfbd89975a3ae37"
} |
For the fpga_core module, how does its code complexity compare with the size of the synthesized hardware, and does it synthesize to a reasonable number of gates given its structure? | fpga_core is a fairly large module with 761 lines of code, a cyclomatic complexity of 14, and 47 assign statements across 3 always blocks, but it maps to only 54 gates at an area of 53.5 because most logic sits in 13 instantiated submodules like udp_complete_64, eth_mac_10g_fifo, and axis_fifo. The synthesized design h... | github_repos/alexforencich_verilog-ethernet/example/VCU108/fpga_10g/rtl/fpga_core.v | fpga_core | static_analyzer+synthesis_tool | [
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "fpga_core",
"port_count": {
"inputs": 41,
"outputs": 15,
"inouts": 0,
"total": 56
},
"signal_count": {
"wires": 226,
"regs": 7,
"parameters": 1,
"total": 233
},
"always_blocks": 3,
"assign_... | multi_tool | static_analyzer+synthesis_tool | compositional | b409bff3ec3c | [{"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the fpga_core module, how does its code complexity compare with the size of the synthesized hardware, and does it synthesize to a reasonable number of gates given its structure?
[static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "fpga_core",
"port_count": {
"input... | 2e588cba3f2a | a01c2f345aca | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/alexforencich/verilog-ethernet",
"commit": "77320a9471d19c7dd383914bc049e02d9f4f1ffb",
"path": "example/VCU108/fpga_10g/rtl/fpga_core.v",
"sha256": "de591ed4d5b20f9350515b9e5f12672017aeebf3c1e66a39045a773a4fbb5818"
} |
For the asic_oai311 module, how does its CDFG structure relate to the delay optimization advice, and what improvement trade-offs are expected? | The CDFG of asic_oai311 has 11 nodes and 14 edges (average degree 1.27), consisting of 2 $and, 1 $not, 2 $or, 5 input ports and 1 output port, and the delay-targeted optimization flow (synth, opt -fast, abc, opt_clean) suggests register retiming and logic duplication to reduce fanout. The estimated changes are a delay ... | github_repos/aolofsson_oh/asiclib/hdl/asic_oai311.v | asic_oai311 | graph_extractor+optimization_advisor | [
{
"graph_type": "CDFG"
},
{
"target_metric": "delay"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[3200 chars elided]...
"node_count": 11,
"edge_count": 14,
"graph_properties": {
"node_types": {
"$and": 2,
"$not": 1,
"$or": 2,
"port_input": 5,
"port_output": 1
},
"avg_degree":... | multi_tool | graph_extractor+optimization_advisor | compositional | a6787c920cb3 | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}] | Question: For the asic_oai311 module, how does its CDFG structure relate to the delay optimization advice, and what improvement trade-offs are expected?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[3200 chars elided]...
"node_count": 11,
"edge_count": 14,
"graph_p... | 0ceb66ba794a | a07309079e05 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "asiclib/hdl/asic_oai311.v",
"sha256": "0c9c56b44d1de8d5935ee162136e368deed93a715ec9b326a1ccefecf0590c04"
} |
For smu_top, how well does the RTL-to-netlist signal mapping line up with the post-synthesis structure, and what do the delay and area figures suggest about this implementation? | The cross-stage mapping shows all 31 RTL signals mapped with an alignment score of 100.0 and 0 unmapped signals, consistent with the synthesized netlist containing 47 wires (447 wire bits) but only 1 cell (an sms_top instance). The synthesis reports a critical path estimate of 50.0, an area of 1.0, and power of 0.001, ... | github_repos/XUANTIE-RV_wujian100_open/soc/smu_top.v | smu_top | cross_stage_mapper+synthesis_tool | [
{},
{
"optimization_level": "medium"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"pmu_smc_hclk": [
"pmu_smc_hclk"
],
"sms3_idle": [
"sms3_idle"
],
"hmain0_smc_s3_hwrite": [
"hmain0_smc_s3_hwrite"
],
"pmu_smc_hrst_b": [
"pmu_smc_hrst_b"
],
"sms0_idle": [
"s... | multi_tool | cross_stage_mapper+synthesis_tool | compositional | a60f04beb5cb | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For smu_top, how well does the RTL-to-netlist signal mapping line up with the post-synthesis structure, and what do the delay and area figures suggest about this implementation?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"pmu_smc_hclk": [
"pmu_smc_hclk"
],
... | eb4737b1afb5 | a0a69a03f1cc | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/XUANTIE-RV/wujian100_open",
"commit": "83e297583bb3454b688f9f27d6bc20ff3276ad32",
"path": "soc/smu_top.v",
"sha256": "07161c1411e526c7f26278f6a891a28031c3f2d7b8120ea2bbbd973d6e5709fd"
} |
For the ad_upack_tb module, considering the delay optimization recommendations and the code complexity analysis, is pipelining worth pursuing and what structural features of the module should I keep in mind? Mention the estimated delay and area impact from the delay-focused optimization analysis. | For ad_upack_tb, the delay-targeted optimization suggests register retiming for pipelining arithmetic operations, with an estimated delay improvement of -20.0 at the cost of a 10.0 area increase and 5.0 power increase. The module has only 1 always block, 1 reg, and 2 inputs and 2 outputs, but its complexity metrics (ne... | github_repos/analogdevicesinc_hdl/library/common/tb/ad_upack_tb.v | ad_upack_tb | optimization_advisor+static_analyzer | [
{
"target_metric": "delay"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metric": "delay",
"recommended_recipes": [
"synth -top ad_upack_tb",
"opt -fast",
"abc -fast -liberty stdcells.lib",
"opt_clean"
],
"optimization_suggestions": [
{
"type": "pipeline_insertion",
"de... | multi_tool | optimization_advisor+static_analyzer | compositional | 128fc7709975 | [{"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the ad_upack_tb module, considering the delay optimization recommendations and the code complexity analysis, is pipelining worth pursuing and what structural features of the module should I keep in mind? Mention the estimated delay and area impact from the delay-focused optimization analysis.
[optimizati... | d69fb16de33c | a086c5c4f5ba | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/common/tb/ad_upack_tb.v",
"sha256": "6b31bbaa98632a2c5f98e423f42b8fea451367d08403d46bc0b42aaa63068d3d"
} |
For the oh_mux3 module, the structural analysis reports 1 assign statement with 33 operators, but after medium-level delay optimization synthesis produces only 5 gates with a critical path of 68.07 â can you summarize how the RTL complexity compares to the synthesized implementation, including area, power, and cell b... | The oh_mux3 RTL is quite simple structurally: 1 assign statement, 33 operators, cyclomatic complexity 1, and no always blocks or wires declared, which synthesizes down to just 5 gates (1 AND and 4 NAND) with an area of 5.0, a critical-path delay of 68.07, and power of 0.005 across 11 internal wires. The instantiation o... | github_repos/aolofsson_oh/stdlib/rtl/oh_mux3.v | oh_mux3 | static_analyzer+synthesis_tool | [
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "oh_mux3",
"port_count": {
"inputs": 3,
"outputs": 0,
"inouts": 0,
"total": 3
},
"signal_count": {
"wires": 0,
"regs": 0,
"parameters": 1,
"total": 0
},
"always_blocks": 0,
"assign_statement... | multi_tool | static_analyzer+synthesis_tool | compositional | 5debf4cb6692 | [{"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the oh_mux3 module, the structural analysis reports 1 assign statement with 33 operators, but after medium-level delay optimization synthesis produces only 5 gates with a critical path of 68.07 â can you summarize how the RTL complexity compares to the synthesized implementation, including area, power, ... | 7b5f8fd633d2 | a158a543789d | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "stdlib/rtl/oh_mux3.v",
"sha256": "69052129664262d8cc5a27ee1fced2cfd58d3c7b20db26284077eaa2174fe44f"
} |
For the system_top module, how well do the RTL ports and signals line up with the netlist after cross-stage mapping, given the port and wire counts from structural analysis and the mapping statistics? | The RTL for system_top declares 44 total ports (9 inputs, 11 outputs, 24 inouts) and 6 internal wires, and all 26 RTL signals were mapped one-to-one onto netlist wires out of 64 netlist wires, with 0 unmapped signals and an alignment score of 100.0. This indicates a perfect RTL-to-netlist correspondence, consistent wit... | github_repos/analogdevicesinc_hdl/projects/adrv9361z7035/ccbob_lvds/system_top.v | system_top | cross_stage_mapper+static_analyzer | [
{},
{
"analysis_type": "full"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"rx_clk_in_n": [
"rx_clk_in_n"
],
"clkout_in": [
"clkout_in"
],
"spi_clk": [
"spi_clk"
],
"tx_frame_out_n": [
"tx_frame_out_n"
],
"gp_in_s": [
"gp_in_s"
],
"rx_frame_i... | multi_tool | cross_stage_mapper+static_analyzer | compositional | 625acf0fadd1 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the system_top module, how well do the RTL ports and signals line up with the netlist after cross-stage mapping, given the port and wire counts from structural analysis and the mapping statistics?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"rx_clk_in_n": [
"r... | 4b61758fe48e | a10a99b5d08f | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "projects/adrv9361z7035/ccbob_lvds/system_top.v",
"sha256": "32c43955dbb89c3722dd35639401da7ceb5af239776239b827c6df29ba52cff9"
} |
For eth_mac_1g, does the CDFG structure match the module's port inventory, and how connected is the design? Please compare the port counts from the CDFG node types with the port totals, and mention the graph's edge count and average degree along with the module's cyclomatic complexity. | Yes, the CDFG for eth_mac_1g shows 61 port_input and 37 port_output nodes, exactly matching the module's 61 inputs and 37 outputs (98 total ports). The graph has 371 edges with an average degree of 3.71 across 100 nodes, while the code itself has a cyclomatic complexity of 13. | github_repos/alexforencich_verilog-ethernet/rtl/eth_mac_1g.v | eth_mac_1g | graph_extractor+static_analyzer | [
{
"graph_type": "CDFG"
},
{
"analysis_type": "full"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[45713 chars elided]...
"node_count": 100,
"edge_count": 371,
"graph_properties": {
"node_types": {
"axis_gmii_rx": 1,
"axis_gmii_tx": 1,
"port_input": 61,
"port_output": 37
},
"avg_deg... | multi_tool | graph_extractor+static_analyzer | compositional | 13460d5e781d | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For eth_mac_1g, does the CDFG structure match the module's port inventory, and how connected is the design? Please compare the port counts from the CDFG node types with the port totals, and mention the graph's edge count and average degree along with the module's cyclomatic complexity.
[graph_extractor {"gra... | d19964566bd1 | a1c0c8c58eba | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/alexforencich/verilog-ethernet",
"commit": "77320a9471d19c7dd383914bc049e02d9f4f1ffb",
"path": "rtl/eth_mac_1g.v",
"sha256": "caacd61ad484d96ff14991100009aa67f16aa66a85d9bd245ed2869926da652c"
} |
For the module e902_had_test, I'm considering running the suggested area-optimization recipes. Given its current complexity metrics and the estimated impact of those area-focused optimizations, what trade-offs should I expect? | The module e902_had_test is already quite complex, with 298 lines of code, a cyclomatic complexity of 13, a nesting depth of 24, and 774 operators across 4 regs and 5 total ports, so aggressive sharing will add routing complexity. The suggested area optimizations are estimated to reduce area by -15.0 and power by -10.0... | github_repos/XUANTIE-RV_wujian100_open/case/had_soc/e902_had_test.v | e902_had_test | optimization_advisor+static_analyzer | [
{
"target_metric": "area"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommended_recipes": [
"synth -top e902_had_test -flatten",
"opt -full; share -aggressive; opt",
"abc -g gates -liberty stdcells.lib",
"opt_clean -purge"
],
"optimization_suggestions": [
{
... | multi_tool | optimization_advisor+static_analyzer | compositional | c22ed51c290b | [{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the module e902_had_test, I'm considering running the suggested area-optimization recipes. Given its current complexity metrics and the estimated impact of those area-focused optimizations, what trade-offs should I expect?
[optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"targe... | d8f663bcced3 | a180380966d1 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/XUANTIE-RV/wujian100_open",
"commit": "83e297583bb3454b688f9f27d6bc20ff3276ad32",
"path": "case/had_soc/e902_had_test.v",
"sha256": "ae9c6f09b61677a4f32216265f7cfccdcb1b22c32ed2f3f5f35c9ae484a2061e"
} |
For the oh_oai311 module, how does the structure shown in its CDFG compare with the synthesized implementation at medium optimization, in terms of operation counts, delay and power? | The CDFG of oh_oai311 has 11 nodes and 14 edges, including 2 $and, 2 $or, and 1 $not operations plus 5 input ports and 1 output port, while synthesis maps this to 4 cells (1 $_AND_, 1 $_NAND_, 2 $_OR_) with 9 wires. The synthesized design achieves an area of 4.0, a delay and critical path estimate of 72.0, and power of... | github_repos/aolofsson_oh/stdlib/rtl/oh_oai311.v | oh_oai311 | graph_extractor+synthesis_tool | [
{
"graph_type": "CDFG"
},
{
"optimization_level": "medium"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[3198 chars elided]...
"node_count": 11,
"edge_count": 14,
"graph_properties": {
"node_types": {
"$and": 2,
"$not": 1,
"$or": 2,
"port_input": 5,
"port_output": 1
},
"avg_degree":... | multi_tool | graph_extractor+synthesis_tool | compositional | 1431a17b0b8c | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the oh_oai311 module, how does the structure shown in its CDFG compare with the synthesized implementation at medium optimization, in terms of operation counts, delay and power?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[3198 chars elided]...
"node_cou... | 355c8e298847 | a204432600d3 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "stdlib/rtl/oh_oai311.v",
"sha256": "26177bc4524343733f602cddacdb17184d397e66e1a9be75c796fe883796adcc"
} |
For the eth_mac_1g module, how do the interface and complexity characteristics relate to the delay-focused optimization recommendations, and what trade-offs should I expect? | The eth_mac_1g module has 98 total ports (61 inputs, 37 outputs), 110 signals, and 569 lines of code with a cyclomatic complexity of 13 and nesting depth of 16, so it is a large but lint-clean design. The delay-oriented optimization suggests pipelining arithmetic operations via register retiming and logic duplication t... | github_repos/alexforencich_verilog-ethernet/rtl/eth_mac_1g.v | eth_mac_1g | optimization_advisor+static_analyzer | [
{
"target_metric": "delay"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metric": "delay",
"recommended_recipes": [
"synth -top eth_mac_1g",
"opt -fast",
"abc -fast -liberty stdcells.lib",
"opt_clean"
],
"optimization_suggestions": [
{
"type": "pipeline_insertion",
"des... | multi_tool | optimization_advisor+static_analyzer | compositional | 4c6dde56c1fd | [{"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the eth_mac_1g module, how do the interface and complexity characteristics relate to the delay-focused optimization recommendations, and what trade-offs should I expect?
[optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metric": "delay",
"recommended_recipes": [
"... | 893c9a419c1a | a1c0c8c58eba | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/alexforencich/verilog-ethernet",
"commit": "77320a9471d19c7dd383914bc049e02d9f4f1ffb",
"path": "rtl/eth_mac_1g.v",
"sha256": "caacd61ad484d96ff14991100009aa67f16aa66a85d9bd245ed2869926da652c"
} |
For the up_pmod module, how do the results of the DFG analysis compare with the post-synthesis results — specifically, what does the DFG report in terms of nodes and edges, and how does that relate to the synthesized gate count, area, and delay? | The DFG for up_pmod contains 35 nodes and 634 edges with an average degree of 18.11, dominated by port_input nodes (9), $_AND_ gates (119 in the synthesized netlist), and flip-flops ($adffe: 2, $adff: 3, matching 33 $_DFFE_PN0P_ and 34 $_DFF_PN0_ cells). After synthesis at medium optimization level, this maps to 258 ga... | github_repos/analogdevicesinc_hdl/library/common/up_pmod.v | up_pmod | graph_extractor+synthesis_tool | [
{
"graph_type": "DFG"
},
{
"optimization_level": "medium"
}
] | [graph_extractor {"graph_type": "DFG"}]
{
"status": "success",
"graph_type": "DFG",
...[29621 chars elided]...
"node_count": 35,
"edge_count": 634,
"graph_properties": {
"node_types": {
"$logic_not": 3,
"$mux": 3,
"$not": 1,
"$eq": 5,
"$logic_and": 2,
"$adffe": 2,
... | multi_tool | graph_extractor+synthesis_tool | compositional | ee0d0be30bbe | [{"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the up_pmod module, how do the results of the DFG analysis compare with the post-synthesis results — specifically, what does the DFG report in terms of nodes and edges, and how does that relate to the synthesized gate count, area, and delay?
[graph_extractor {"graph_type": "DFG"}]
{
"status": "success"... | 86670c6dcd20 | a1d69b32c106 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/common/up_pmod.v",
"sha256": "350bcc35dc0a276143cc568c1578fd6c189a670bb512c2201b96efcc0376f4ca"
} |
For the udp module, the synthesis at medium optimization produced a netlist with a certain number of wires and cells — does the RTL-to-netlist signal mapping fully account for those wires and cells, and how good is the alignment? | Synthesis of udp at medium optimization produced 3 cells (one udp_checksum_gen, one udp_ip_rx, one udp_ip_tx) and 130 wires, and the RTL-to-netlist mapping reports exactly 130 netlist wires with 130 mapped signals out of 131 RTL signals. The alignment score is 99.24, with the only unmapped element being "wire", so the ... | github_repos/corundum_corundum/fpga/lib/eth/rtl/udp.v | udp | cross_stage_mapper+synthesis_tool | [
{},
{
"optimization_level": "medium"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"tx_udp_ip_fragment_offset": [
"tx_udp_ip_fragment_offset"
],
"m_udp_payload_axis_tready": [
"m_udp_payload_axis_tready"
],
"s_ip_eth_src_mac": [
"s_ip_eth_src_mac"
],
"m_udp_payload_axis_tvalid"... | multi_tool | cross_stage_mapper+synthesis_tool | compositional | b74053d79b52 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the udp module, the synthesis at medium optimization produced a netlist with a certain number of wires and cells — does the RTL-to-netlist signal mapping fully account for those wires and cells, and how good is the alignment?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
... | 98a181fee1c6 | a1c363c542ae | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/eth/rtl/udp.v",
"sha256": "750d3cf657463e28cab742eaf2309022840f3d00b45e3b668153b7fd63254cd7"
} |
For the module fpga, how well does the RTL-to-netlist signal mapping line up with its AIG structure, and what do the two views say about the design's connectivity? | The mapping is nearly perfect with an alignment score of 98.18, covering 54 of 55 RTL signals and leaving only 'wire' unmapped out of 66 netlist wires. The AIG view shows a compact but extremely dense structure with just 13 nodes and 3343 edges, giving an average degree of 257.15, which reflects the many wide connectio... | github_repos/corundum_corundum/fpga/lib/pcie/example/ExaNIC_X25/fpga_axi/rtl/fpga.v | fpga | cross_stage_mapper+graph_extractor | [
{},
{
"graph_type": "AIG"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"pcie_tx_p": [
"pcie_tx_p"
],
"cfg_max_read_req": [
"cfg_max_read_req"
],
"cfg_interrupt_msi_pending_status_function_num": [
"cfg_interrupt_msi_pending_status_function_num"
],
"wire": [],
"st... | multi_tool | cross_stage_mapper+graph_extractor | compositional | b301059e9bf7 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}] | Question: For the module fpga, how well does the RTL-to-netlist signal mapping line up with its AIG structure, and what do the two views say about the design's connectivity?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"pcie_tx_p": [
"pcie_tx_p"
],
"cfg_max_read_req"... | 0bd062509aca | a21835098d42 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/pcie/example/ExaNIC_X25/fpga_axi/rtl/fpga.v",
"sha256": "2c52ee609910b0309ea6ddfabba2bf404b1e75a189520a6c2c872dd164449dcd"
} |
For axi_ad9361_lvds_if_c5, how does its code complexity compare with its synthesized gate-level result, and what are the key figures from each? | axi_ad9361_lvds_if_c5 has 305 lines of code with a cyclomatic complexity of 3 but a fairly deep nesting depth of 8, and it synthesizes to 69 cells (31 $_DFF_N_, 1 $_DFF_PN1_, 32 $_DFF_P_, 1 $_AND_, plus the LVDS/DDIO primitives) with an area of 258.0. Despite the large operator count of 542 in the source, the netlist i... | github_repos/analogdevicesinc_hdl/library/axi_ad9361/intel/axi_ad9361_lvds_if_c5.v | axi_ad9361_lvds_if_c5 | static_analyzer+synthesis_tool | [
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "axi_ad9361_lvds_if_c5",
"port_count": {
"inputs": 8,
"outputs": 8,
"inouts": 0,
"total": 16
},
"signal_count": {
"wires": 4,
"regs": 10,
"parameters": 0,
"total": 14
},
"always_blocks": 6,
... | multi_tool | static_analyzer+synthesis_tool | compositional | f75405d8ee39 | [{"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For axi_ad9361_lvds_if_c5, how does its code complexity compare with its synthesized gate-level result, and what are the key figures from each?
[static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "axi_ad9361_lvds_if_c5",
"port_count": {
"inputs": 8,
"outputs": 8,
... | 606260cc5a8c | a25034f2723b | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/axi_ad9361/intel/axi_ad9361_lvds_if_c5.v",
"sha256": "7ce5e916f0017b478b241ad8f4fd15b3213e4fe14661c998fd81928a439d4fa2"
} |
For test_axis_ram_switch_1x4_256_64, how would aggressive resource sharing affect area, delay, and power, and how does the code's complexity compare to its size? Consider the area-focused optimization advice together with the module statistics and the control-flow/data-flow structure. | For test_axis_ram_switch_1x4_256_64, the aggressive sharing recipe is estimated to reduce area by -15.0 and power by -10.0 but increase delay by 5.0, at the cost of higher routing complexity. The module itself is small in control complexity (cyclomatic complexity 2, nesting depth 1, 3 regs and 25 parameters) relative t... | github_repos/corundum_corundum/fpga/lib/eth/lib/axis/tb/test_axis_ram_switch_1x4_256_64.v | test_axis_ram_switch_1x4_256_64 | optimization_advisor+static_analyzer | [
{
"target_metric": "area"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommended_recipes": [
"synth -top test_axis_ram_switch_1x4_256_64 -flatten",
"opt -full; share -aggressive; opt",
"abc -g gates -liberty stdcells.lib",
"opt_clean -purge"
],
"optimization_sugges... | multi_tool | optimization_advisor+static_analyzer | compositional | 63dff37dda58 | [{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For test_axis_ram_switch_1x4_256_64, how would aggressive resource sharing affect area, delay, and power, and how does the code's complexity compare to its size? Consider the area-focused optimization advice together with the module statistics and the control-flow/data-flow structure.
[optimization_advisor {... | 0f4eac2b8b7d | a27d6358f05a | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/eth/lib/axis/tb/test_axis_ram_switch_1x4_256_64.v",
"sha256": "50c24e7b393641529facbb26a0362084715e9abe10134c683b9bfa79acb35a5e"
} |
For ct_vfdsu_double, how do the structural complexity seen in its AIG and the power optimization estimates relate, and is power optimization worth it given the module's composition? Mention the estimated power, area, and delay changes. | The AIG for ct_vfdsu_double has 29 nodes and 1374 edges with an average degree of 47.38, reflecting a purely structural module (cyclomatic complexity 2, 0 always blocks) that wires together four submodules (ct_vfdsu_pack, ct_vfdsu_prepare, ct_vfdsu_srt, ct_vfdsu_round) across 22 ports and 87 wires. Clock gating and ope... | github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/vfdsu/rtl/ct_vfdsu_double.v | ct_vfdsu_double | graph_extractor+optimization_advisor+static_analyzer | [
{
"graph_type": "AIG"
},
{
"target_metric": "power"
},
{
"analysis_type": "full"
}
] | [graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_type": "AIG",
...[26222 chars elided]...
"node_count": 29,
"edge_count": 1374,
"graph_properties": {
"node_types": {
"ct_vfdsu_pack": 1,
"ct_vfdsu_prepare": 1,
"ct_vfdsu_round": 1,
"ct_vfdsu_srt": 1,
"port_... | multi_tool | graph_extractor+optimization_advisor+static_analyzer | compositional | fce39c6c9ad1 | [{"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "power"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For ct_vfdsu_double, how do the structural complexity seen in its AIG and the power optimization estimates relate, and is power optimization worth it given the module's composition? Mention the estimated power, area, and delay changes.
[graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph... | 339b3ee50fb7 | a21fc314d307 | train | glm-5.3 | 3 | 3,300 | {
"repository": "https://github.com/XUANTIE-RV/openc910",
"commit": "b91c90914c19f114d35c8f6b73408eb241ed847c",
"path": "C910_RTL_FACTORY/gen_rtl/vfdsu/rtl/ct_vfdsu_double.v",
"sha256": "ef7f95275e4d59d343e16233d21c266a6b690d1a372ebe2b630bf8f858840888"
} |
For the module axi_ram_wr_if, how large is its And-Inverter Graph (AIG) representation, and if I follow the area-focused optimization recommendations, what trade-offs should I expect? | The AIG for axi_ram_wr_if contains 8969 nodes and 21859 edges with an average degree of 2.44, made up of 3863 AND gates, 4999 inverters, 59 $_DFFE_PP_ flops, and 4 $_SDFF_PP0_ flops. Applying the suggested area optimization (including mux sharing and aggressive resource sharing) is estimated to reduce area by -15.0 and... | github_repos/corundum_corundum/fpga/lib/axi/rtl/axi_ram_wr_if.v | axi_ram_wr_if | graph_extractor+optimization_advisor | [
{
"graph_type": "AIG"
},
{
"target_metric": "area"
}
] | [graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_type": "AIG",
...[33867 chars elided]...
"node_count": 8969,
"edge_count": 21859,
"graph_properties": {
"node_types": {
"$_AND_": 3863,
"$_NOT_": 4999,
"$_SDFF_PP0_": 4,
"$_DFFE_PP_": 59,
"$_SDFFCE_PN0P_": ... | multi_tool | graph_extractor+optimization_advisor | compositional | a7400a198d36 | [{"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}] | Question: For the module axi_ram_wr_if, how large is its And-Inverter Graph (AIG) representation, and if I follow the area-focused optimization recommendations, what trade-offs should I expect?
[graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_type": "AIG",
...[33867 chars elided]...
"node_co... | 5dfef2a0c1e2 | a265f5b8ba3c | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/axi/rtl/axi_ram_wr_if.v",
"sha256": "cec0682f902f11d61c852812426ffa61417d281b82df10625cbfafd621209743"
} |
For the module IOBUFDS_DIFF_OUT_INTERMDISABLE, how does its AIG connectivity relate to the feasibility of the suggested area optimization flow, and what trade-offs should I expect? | The AIG for IOBUFDS_DIFF_OUT_INTERMDISABLE has 9 nodes (2 port_output, 2 port_inout, 5 port_input) and 0 edges with an average degree of 0.0, so there is essentially no internal logic for the area recipes like "share -aggressive" or "opt_clean -purge" to act on. The estimated improvement is area -15.0 and power -10.0, ... | github_repos/aolofsson_oh/xilibs/dv/IOBUFDS_DIFF_OUT_INTERMDISABLE.v | IOBUFDS_DIFF_OUT_INTERMDISABLE | graph_extractor+optimization_advisor | [
{
"graph_type": "AIG"
},
{
"target_metric": "area"
}
] | [graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_type": "AIG",
"node_count": 9,
"edge_count": 0,
"graph_properties": {
"node_types": {
"port_output": 2,
"port_inout": 2,
"port_input": 5
},
"avg_degree": 0.0,
"module_name": "IOBUFDS_DIFF_OUT_INTERMDISABLE"... | multi_tool | graph_extractor+optimization_advisor | compositional | 93b8cfe00a0b | [{"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}] | Question: For the module IOBUFDS_DIFF_OUT_INTERMDISABLE, how does its AIG connectivity relate to the feasibility of the suggested area optimization flow, and what trade-offs should I expect?
[graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_type": "AIG",
"node_count": 9,
"edge_count": 0,
... | 3359a36ba016 | a2f183046469 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "xilibs/dv/IOBUFDS_DIFF_OUT_INTERMDISABLE.v",
"sha256": "68bdad7adcff148c07f078842d6577e0aca0b194a5a37a63c096db8595d85f1a"
} |
For the adrv9001_rx module, how does the register structure seen in its DFG relate to the synthesized results, and does anything look inconsistent between them? | The DFG for adrv9001_rx contains 41 nodes and 117 edges with an average degree of 2.85, including only 1 $sdff and 5 $dff nodes alongside 5 adrv9001_gpio_in instances and 1 periphery_clk_buf, yet synthesis reports 50 cells including 40 $_DFF_P_ plus 3 $_SDFF_PP0_ and 1 $_SDFF_PP1. Both agree on the 5 adrv9001_gpio_in c... | github_repos/analogdevicesinc_hdl/library/axi_adrv9001/intel/adrv9001_rx.v | adrv9001_rx | graph_extractor+synthesis_tool | [
{
"graph_type": "DFG"
},
{
"optimization_level": "medium"
}
] | [graph_extractor {"graph_type": "DFG"}]
{
"status": "success",
"graph_type": "DFG",
...[16722 chars elided]...
"node_count": 41,
"edge_count": 117,
"graph_properties": {
"node_types": {
"$sdff": 1,
"$dff": 5,
"adrv9001_gpio_in": 5,
"periphery_clk_buf": 1,
"port_input": 16,
... | multi_tool | graph_extractor+synthesis_tool | compositional | e640a0b8e4d4 | [{"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the adrv9001_rx module, how does the register structure seen in its DFG relate to the synthesized results, and does anything look inconsistent between them?
[graph_extractor {"graph_type": "DFG"}]
{
"status": "success",
"graph_type": "DFG",
...[16722 chars elided]...
"node_count": 41,
"edge_count... | d75dc6efff7a | a2b04b1e325c | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/axi_adrv9001/intel/adrv9001_rx.v",
"sha256": "da72e9d7656a0cac5926c4ad0814e26cc31d9acf459afae92ee7d58c6a7f7636"
} |
For fec_rot_31, does the xor-heavy structure seen in its CDFG match the operator counts reported by the source-level analysis, and how would you summarize its overall complexity? | The CDFG for fec_rot_31 contains 200 $xor nodes out of 202 total nodes with 600 edges, which is consistent with the source analysis reporting 510 operators across 32 assign statements. Despite this, the design is structurally simple: 91 lines of code, cyclomatic complexity of 2, nesting depth of 0, only 3 ports, and no... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/ethernet_fec/fec_rot_31.v | fec_rot_31 | graph_extractor+static_analyzer | [
{
"graph_type": "CDFG"
},
{
"analysis_type": "full"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[66496 chars elided]...
"node_count": 202,
"edge_count": 600,
"graph_properties": {
"node_types": {
"$xor": 200,
"port_input": 1,
"port_output": 1
},
"avg_degree": 2.97,
"module_name": "f... | multi_tool | graph_extractor+static_analyzer | compositional | 3e8c740c971a | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For fec_rot_31, does the xor-heavy structure seen in its CDFG match the operator counts reported by the source-level analysis, and how would you summarize its overall complexity?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[66496 chars elided]...
"node_count... | 4fa6f41e4d9d | a359581a10ef | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/ethernet_fec/fec_rot_31.v",
"sha256": "1e75f6c76c37574c8d37b267521f2e4dbece9368d2f34435f317fd2c51e4bf89"
} |
For the axi_ad9467 module, how well do the RTL signals survive into the netlist, and does the size and complexity of the RTL suggest that mapping gap is a concern? | The axi_ad9467 RTL has 50 signals, of which 44 mapped to the netlist and 6 (up_wack, up_rack, up_rack_s, up_wack_s, up_rdata_s, up_rdata) were left unmapped, giving an alignment score of 88.0. The RTL itself is moderately sized with 245 lines of code, cyclomatic complexity 3, nesting depth 3, 450 operators, and 26 tota... | github_repos/analogdevicesinc_hdl/library/axi_ad9467/axi_ad9467.v | axi_ad9467 | cross_stage_mapper+static_analyzer | [
{},
{
"analysis_type": "full"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"up_rstn": [
"up_rstn"
],
"up_wreq_s": [
"up_wreq_s"
],
"s_axi_arvalid": [
"s_axi_arvalid"
],
"up_wack": [],
"up_dwdata_s": [
"up_dwdata_s"
],
"up_status_pn_err_s": [
"up_... | multi_tool | cross_stage_mapper+static_analyzer | compositional | 1e42b6a93b55 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the axi_ad9467 module, how well do the RTL signals survive into the netlist, and does the size and complexity of the RTL suggest that mapping gap is a concern?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"up_rstn": [
"up_rstn"
],
"up_wreq_s": [
"... | 85f0a23a67df | a370d7c62ad4 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/axi_ad9467/axi_ad9467.v",
"sha256": "dfaa1bc8037222491699b41dcba04d19d55bdcbee1b6504ed009384a95e3736f"
} |
For fec_rot_26, how well does the RTL map to the netlist according to the cross-stage signal mapping, and how should I weigh that against the delay optimization plan you suggested? | The RTL-to-netlist mapping for fec_rot_26 only has an alignment score of 66.67, with 2 of 3 RTL signals mapped (c and co) and count left unmapped, which is worth resolving before trusting equivalence since the netlist has 252 wires versus just 3 RTL signals. If you proceed with the delay-focused optimization, the sugge... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/ethernet_fec/fec_rot_26.v | fec_rot_26 | cross_stage_mapper+optimization_advisor | [
{},
{
"target_metric": "delay"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"c": [
"co",
"c"
],
"count": [],
"co": [
"co"
]
},
"alignment_score": 66.67,
"unmapped_elements": [
"count"
],
"mapping_statistics": {
"rtl_signals": 3,
"netlist_wires": 252,
"n... | multi_tool | cross_stage_mapper+optimization_advisor | compositional | 7bebd1a28c07 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}] | Question: For fec_rot_26, how well does the RTL map to the netlist according to the cross-stage signal mapping, and how should I weigh that against the delay optimization plan you suggested?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"c": [
"co",
"c"
],
"coun... | 436df5754af2 | a37a66968642 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/ethernet_fec/fec_rot_26.v",
"sha256": "a730183684af1d0e2a2d3eb5a0c02c9d9f8ea1cbc907341c6d046c966fe93979"
} |
For the ct_f_spsram_128x104 module, how does its control/dataflow graph (CDFG) structure compare with its source-level complexity — specifically, given its cyclomatic complexity, lines of code, and the node and edge counts of the CDFG, does the graph density look unusually high, and what node types dominate it? | Although ct_f_spsram_128x104 has fairly low source-level complexity (cyclomatic complexity 3, 95 lines of code, 13 assign statements), its CDFG is dense with 27 nodes and 317 edges, giving an average degree of 11.74. The graph is dominated by 8 $logic_and nodes and 4 fpga_ram blocks, alongside 6 $logic_not nodes, 1 $df... | github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/fpga/rtl/ct_f_spsram_128x104.v | ct_f_spsram_128x104 | graph_extractor+static_analyzer | [
{
"graph_type": "CDFG"
},
{
"analysis_type": "full"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[29783 chars elided]...
"node_count": 27,
"edge_count": 317,
"graph_properties": {
"node_types": {
"$logic_and": 8,
"$logic_not": 6,
"$dff": 1,
"$mux": 1,
"fpga_ram": 4,
"port_input... | multi_tool | graph_extractor+static_analyzer | compositional | 6a22f985d944 | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the ct_f_spsram_128x104 module, how does its control/dataflow graph (CDFG) structure compare with its source-level complexity — specifically, given its cyclomatic complexity, lines of code, and the node and edge counts of the CDFG, does the graph density look unusually high, and what node types dominate i... | 459895d982e3 | a35acd5d3547 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/XUANTIE-RV/openc910",
"commit": "b91c90914c19f114d35c8f6b73408eb241ed847c",
"path": "C910_RTL_FACTORY/gen_rtl/fpga/rtl/ct_f_spsram_128x104.v",
"sha256": "2c2fdcb9207afc3ceaf6929c356a881ae1e466968edcebe914d4612101d27431"
} |
For system_top, how well did the RTL ports and signals survive into the netlist, and how does that relate to the module's structure and complexity? | The RTL-to-netlist mapping for system_top was perfect, with an alignment score of 100.0 covering all 59 RTL signals (0 unmapped) against 86 netlist wires. This is consistent with the module being a simple structural top level: 52 total ports (12 inputs, 32 outputs, 8 inouts), only 12 assign statements, no always blocks... | github_repos/analogdevicesinc_hdl/projects/ad469x_evb/de10nano/system_top.v | system_top | cross_stage_mapper+static_analyzer | [
{},
{
"analysis_type": "full"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"ddr3_cas_n": [
"ddr3_cas_n"
],
"hdmi_data": [
"hdmi_data_e",
"hdmi_data"
],
"eth1_mdc": [
"eth1_mdc"
],
"ddr3_a": [
"ddr3_a"
],
"usb1_nxt": [
"usb1_nxt"
],
"sdi... | multi_tool | cross_stage_mapper+static_analyzer | compositional | 585fa4a5dd8a | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For system_top, how well did the RTL ports and signals survive into the netlist, and how does that relate to the module's structure and complexity?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"ddr3_cas_n": [
"ddr3_cas_n"
],
"hdmi_data": [
"hdmi_data_... | 343b89d41b2c | a3f3d1a64768 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "projects/ad469x_evb/de10nano/system_top.v",
"sha256": "7d86849cdda4789759a2e711890a4ef9c515b6b3420462e828849afc69f0d1d8"
} |
For fec_rot_31, how does the XOR-heavy structure seen in its CDFG relate to the synthesized cell mix, and what are the resulting delay and power figures? | The CDFG of fec_rot_31 contains 200 $xor nodes out of 202 total nodes with 600 edges, which matches a synthesized netlist of 144 gates made up entirely of 95 $_XNOR_ and 49 $_XOR_ cells. This logic costs 288.0 area, a critical-path delay of 355.3, and 0.144 power. | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/ethernet_fec/fec_rot_31.v | fec_rot_31 | graph_extractor+synthesis_tool | [
{
"graph_type": "CDFG"
},
{
"optimization_level": "medium"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[66496 chars elided]...
"node_count": 202,
"edge_count": 600,
"graph_properties": {
"node_types": {
"$xor": 200,
"port_input": 1,
"port_output": 1
},
"avg_degree": 2.97,
"module_name": "f... | multi_tool | graph_extractor+synthesis_tool | compositional | 6935d43861dc | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For fec_rot_31, how does the XOR-heavy structure seen in its CDFG relate to the synthesized cell mix, and what are the resulting delay and power figures?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[66496 chars elided]...
"node_count": 202,
"edge_count": 6... | ee5f0364b93b | a359581a10ef | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/ethernet_fec/fec_rot_31.v",
"sha256": "1e75f6c76c37574c8d37b267521f2e4dbece9368d2f34435f317fd2c51e4bf89"
} |
For the ip_eth_tx module, compare the number of flip-flop nodes in its CDFG against how well the RTL signals carried over to the netlist — does the flip-flop count seem consistent with the number of state-holding signals that failed to map? | The CDFG for ip_eth_tx contains 23 $dffe nodes (plus 7 $sdff and 2 $sdffe), while the RTL-to-netlist mapping only aligned 50 of 85 RTL signals, leaving 35 unmapped with an alignment score of 58.82 — and the unmapped list is dominated by exactly that kind of state-holding logic (e.g., ip_flags_reg, hdr_sum_reg, word_cou... | github_repos/alexforencich_verilog-ethernet/rtl/ip_eth_tx.v | ip_eth_tx | cross_stage_mapper+graph_extractor | [
{},
{
"graph_type": "CDFG"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"m_eth_payload_axis_tuser_reg": [],
"wire": [],
"ip_flags_reg": [],
"store_eth_payload_axis_temp_to_output": [
"store_eth_payload_axis_temp_to_output"
],
"s_eth_dest_mac": [
"s_eth_dest_mac"
],
"m_... | multi_tool | cross_stage_mapper+graph_extractor | compositional | c87bd29c87e1 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}] | Question: For the ip_eth_tx module, compare the number of flip-flop nodes in its CDFG against how well the RTL signals carried over to the netlist — does the flip-flop count seem consistent with the number of state-holding signals that failed to map?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_m... | 338ab5be3629 | a348dde5cd85 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/alexforencich/verilog-ethernet",
"commit": "77320a9471d19c7dd383914bc049e02d9f4f1ffb",
"path": "rtl/ip_eth_tx.v",
"sha256": "53a1378a6cd5cfa50ece8169f3f83bf4fadd6a66abe04809fe6a995ea224b3ce"
} |
For the ad_pnmon module, how does the source-level complexity (lines of code, cyclomatic complexity, operator count, port and signal counts) compare with the synthesized implementation in terms of gate count, area, delay, and power at medium optimization, and does the ratio seem reasonable? | The ad_pnmon module is small at the source level — 55 lines of code, cyclomatic complexity 6, 472 operators, 5 total ports and 12 total signals — and it synthesizes to 77 gates with an area of 113.5, a delay of 229.46, and power of 0.077. The gate count of 77 relative to the 472 operators suggests the logic shares and ... | github_repos/analogdevicesinc_hdl/library/common/ad_pnmon.v | ad_pnmon | static_analyzer+synthesis_tool | [
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "ad_pnmon",
"port_count": {
"inputs": 3,
"outputs": 2,
"inouts": 0,
"total": 5
},
"signal_count": {
"wires": 6,
"regs": 6,
"parameters": 4,
"total": 12
},
"always_blocks": 1,
"assign_stateme... | multi_tool | static_analyzer+synthesis_tool | compositional | d49668d4edcc | [{"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the ad_pnmon module, how does the source-level complexity (lines of code, cyclomatic complexity, operator count, port and signal counts) compare with the synthesized implementation in terms of gate count, area, delay, and power at medium optimization, and does the ratio seem reasonable?
[static_analyzer ... | 0de58491b8fd | a3aae05c0be9 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/common/ad_pnmon.v",
"sha256": "828c6c1d9581a54b85b11b180629e35bb2e28af2846cf4d660c1bac9c786fece"
} |
For the up_dac_common module, how do the structural characteristics of its DFG relate to the synthesis results — specifically, does the large number of equality comparators and flip-flops suggested by the dataflow graph show up in the synthesized cell counts, and what area, delay, and power does that translate to? | The DFG for up_dac_common contains 207 nodes and 3314 edges with 43 $eq comparators and a mix of sequential elements including 25 $adffe, 13 $adff, 7 $dff and 1 $sdffe, and this carries into synthesis as 247 $_DFFE_PN0P_, 41 $_DFF_PN0_ and 32 $_SDFFE_PN0P_ cells. The resulting netlist uses 1739 gates at an area of 1882... | github_repos/analogdevicesinc_hdl/library/common/up_dac_common.v | up_dac_common | graph_extractor+synthesis_tool | [
{
"graph_type": "DFG"
},
{
"optimization_level": "medium"
}
] | [graph_extractor {"graph_type": "DFG"}]
{
"status": "success",
"graph_type": "DFG",
...[61689 chars elided]...
"node_count": 207,
"edge_count": 3314,
"graph_properties": {
"node_types": {
"$eq": 43,
"$mux": 24,
"$not": 8,
"$logic_and": 17,
"$and": 2,
"$gt": 1,
"$s... | multi_tool | graph_extractor+synthesis_tool | compositional | bb0b4c4aad0f | [{"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the up_dac_common module, how do the structural characteristics of its DFG relate to the synthesis results — specifically, does the large number of equality comparators and flip-flops suggested by the dataflow graph show up in the synthesized cell counts, and what area, delay, and power does that translat... | fe84f620b8a2 | a436ee1e699d | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/common/up_dac_common.v",
"sha256": "9186112d2652c4868f6e3efd7b9341cbefc8eec7a16d813d8725a9ce57322cda"
} |
For the int_test2_rom module, how does the structure shown by its DFG match up with the synthesis results, and what do they together tell you about the design's size and timing? | The DFG for int_test2_rom shows 4 nodes and 50 edges, consisting of a single RAMB16_S18 instance plus 2 input ports and 1 output port with an average degree of 12.5, which matches the synthesis result of exactly 1 RAMB16_S18 cell (gate_count 1) with 3 wires totaling 29 wire bits. Synthesis reports a delay (critical pat... | github_repos/pConst_basic_verilog/pacoblaze-2.2/test/int_test2_rom.v | int_test2_rom | graph_extractor+synthesis_tool | [
{
"graph_type": "DFG"
},
{
"optimization_level": "medium"
}
] | [graph_extractor {"graph_type": "DFG"}]
{
"status": "success",
"graph_type": "DFG",
...[4197 chars elided]...
"node_count": 4,
"edge_count": 50,
"graph_properties": {
"node_types": {
"RAMB16_S18": 1,
"port_input": 2,
"port_output": 1
},
"avg_degree": 12.5,
"module_name": "int... | multi_tool | graph_extractor+synthesis_tool | compositional | dc613157f300 | [{"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the int_test2_rom module, how does the structure shown by its DFG match up with the synthesis results, and what do they together tell you about the design's size and timing?
[graph_extractor {"graph_type": "DFG"}]
{
"status": "success",
"graph_type": "DFG",
...[4197 chars elided]...
"node_count": 4... | 12aa865309d7 | a4a4b8e6e07e | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "pacoblaze-2.2/test/int_test2_rom.v",
"sha256": "daf5506115753446260e355f2f7483be1bb50b302d4d30fa71cebdea8f4e973f"
} |
For the mrx_io module, how does its structural composition in the AIG relate to its source-level description and port interface? | The mrx_io module maps to an AIG with 3916 nodes and 9798 edges, dominated by 2156 $_NOT_ gates, 1611 $_AND_ gates, 128 $_DFFE_PP_ flip-flops and 10 $_DFF_PN0_ flip-flops, plus a single oh_rsync instance. At the source level it is small by comparison: 8 total ports (5 inputs and 3 outputs, matching the 6 port_input and... | github_repos/aolofsson_oh/mio/hdl/mrx_io.v | mrx_io | graph_extractor+static_analyzer | [
{
"graph_type": "AIG"
},
{
"analysis_type": "full"
}
] | [graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_type": "AIG",
...[33508 chars elided]...
"node_count": 3916,
"edge_count": 9798,
"graph_properties": {
"node_types": {
"$_AND_": 1611,
"$_NOT_": 2156,
"$_DFF_PN0_": 10,
"$_DFFE_PP_": 128,
"oh_iddr": 1,
... | multi_tool | graph_extractor+static_analyzer | compositional | 32f4db71676a | [{"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the mrx_io module, how does its structural composition in the AIG relate to its source-level description and port interface?
[graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_type": "AIG",
...[33508 chars elided]...
"node_count": 3916,
"edge_count": 9798,
"graph_properties":... | b41fcb158f05 | a4ad35860be8 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "mio/hdl/mrx_io.v",
"sha256": "cace15e8d25f201f72cb9c36d9706e9542d335d3d5df359dfd8e2a45b1166dd3"
} |
For the auto_pwm_rom module, is applying the power optimization recommendations worth it, considering the module's structure and complexity? Please compare the expected power and area/delay trade-offs with the module's cyclomatic complexity and operator count. | Even though auto_pwm_rom has only cyclomatic complexity 1 and 3 total ports, its 303 operators across 165 lines of code suggest enough activity for the power optimizations (clock gating and operand isolation) to pay off, with an estimated power improvement of -25.0 percent. The cost is an estimated 5.0 percent increase... | github_repos/pConst_basic_verilog/pacoblaze-2.2/test/auto_pwm_rom.v | auto_pwm_rom | optimization_advisor+static_analyzer | [
{
"target_metric": "power"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "power"}]
{
"status": "success",
"target_metric": "power",
"recommended_recipes": [
"synth -top auto_pwm_rom",
"opt; share; opt",
"abc -g gates -liberty stdcells.lib",
"opt_clean; clockgate"
],
"optimization_suggestions": [
{
"type": "clock_gat... | multi_tool | optimization_advisor+static_analyzer | compositional | a4161f78610c | [{"tool": "optimization_advisor", "parameters": {"target_metric": "power"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the auto_pwm_rom module, is applying the power optimization recommendations worth it, considering the module's structure and complexity? Please compare the expected power and area/delay trade-offs with the module's cyclomatic complexity and operator count.
[optimization_advisor {"target_metric": "power"}... | c7130b06ec55 | a4fbd8209445 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "pacoblaze-2.2/test/auto_pwm_rom.v",
"sha256": "da85ed2a58d489c3157b0335b3add6d82e266c3c734f656d060f2e689b592c12"
} |
For the axis_fifo_adapter module, how does the port structure shown in its DFG compare with the static analysis port counts, and what does synthesis report for its complexity and area? | The DFG for axis_fifo_adapter has 26 nodes and 91 edges, with 11 input ports and 14 output ports connected through a single axis_fifo instance, matching the static analyzer's 17 module inputs, 21 module outputs, and 38 total ports (the DFG shows only the ports wired to the FIFO). Despite 272 lines of code, cyclomatic c... | github_repos/corundum_corundum/fpga/lib/eth/lib/axis/rtl/axis_fifo_adapter.v | axis_fifo_adapter | graph_extractor+static_analyzer+synthesis_tool | [
{
"graph_type": "DFG"
},
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [graph_extractor {"graph_type": "DFG"}]
{
"status": "success",
"graph_type": "DFG",
...[12837 chars elided]...
"node_count": 26,
"edge_count": 91,
"graph_properties": {
"node_types": {
"axis_fifo": 1,
"port_input": 11,
"port_output": 14
},
"avg_degree": 3.5,
"module_name": "a... | multi_tool | graph_extractor+static_analyzer+synthesis_tool | compositional | a1a644d9f877 | [{"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the axis_fifo_adapter module, how does the port structure shown in its DFG compare with the static analysis port counts, and what does synthesis report for its complexity and area?
[graph_extractor {"graph_type": "DFG"}]
{
"status": "success",
"graph_type": "DFG",
...[12837 chars elided]...
"node_c... | 52be2b73e94a | a4f95616267a | train | glm-5.3 | 3 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/eth/lib/axis/rtl/axis_fifo_adapter.v",
"sha256": "7662fbf53def5dfb353a590a3ae7309b4f9519847288c90a42ed63df57c95d00"
} |
For the gmii_phy_if module, the area-focused optimization suggests some changes — how large is the design it would act on according to the AIG graph analysis, and what trade-off in delay is estimated? | The AIG graph for gmii_phy_if has 39 nodes and 93 edges with an average degree of 2.38, including 8 D-type flip-flops. The area optimization is estimated to reduce area by -15.0 and power by -10.0, but at the cost of increasing delay by 5.0, consistent with the noted trade-off that area optimization may increase delay. | github_repos/corundum_corundum/fpga/lib/eth/rtl/gmii_phy_if.v | gmii_phy_if | graph_extractor+optimization_advisor | [
{
"graph_type": "AIG"
},
{
"target_metric": "area"
}
] | [graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_type": "AIG",
...[13896 chars elided]...
"node_count": 39,
"edge_count": 93,
"graph_properties": {
"node_types": {
"$_AND_": 3,
"$_NOT_": 4,
"$_DFF_PP1_": 8,
"ssio_sdr_in": 1,
"ssio_sdr_out": 1,
"port... | multi_tool | graph_extractor+optimization_advisor | compositional | 8f9a685ede19 | [{"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}] | Question: For the gmii_phy_if module, the area-focused optimization suggests some changes — how large is the design it would act on according to the AIG graph analysis, and what trade-off in delay is estimated?
[graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_type": "AIG",
...[13896 chars elid... | 107959504d6f | a533c5a4ec75 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/eth/rtl/gmii_phy_if.v",
"sha256": "9da180f3c5e7036c8cdc81a157315789c409cbf7c63f672ad3fec37ac966afc3"
} |
For gmii_phy_if, how well does the RTL-to-netlist signal mapping line up with the structure shown in its AIG graph — are the unmapped RTL signals like tx_rst_reg actually visible as logic in the AIG? | The mapping covers 22 of 26 RTL signals with an alignment score of 84.62, leaving tx_rst_reg, rx_rst_reg, style, and wire unmapped. The AIG graph for gmii_phy_if has 39 nodes including 8 $_DFF_PP1_ flip-flops and 4 $_NOT_ gates plus the ssio_sdr_in and ssio_sdr_out instances, so the unmapped reset registers are not rep... | github_repos/corundum_corundum/fpga/lib/eth/rtl/gmii_phy_if.v | gmii_phy_if | cross_stage_mapper+graph_extractor | [
{},
{
"graph_type": "AIG"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"phy_gmii_tx_clk": [
"phy_gmii_tx_clk"
],
"phy_gmii_rx_er": [
"phy_gmii_rx_er"
],
"clk": [
"phy_gmii_tx_clk",
"phy_mii_tx_clk",
"mac_gmii_tx_clk",
"clk",
"mac_gmii_rx_clk"
],
... | multi_tool | cross_stage_mapper+graph_extractor | compositional | 953e2113451a | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}] | Question: For gmii_phy_if, how well does the RTL-to-netlist signal mapping line up with the structure shown in its AIG graph — are the unmapped RTL signals like tx_rst_reg actually visible as logic in the AIG?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"phy_gmii_tx_clk": [
... | ad63b027f63a | a533c5a4ec75 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/eth/rtl/gmii_phy_if.v",
"sha256": "9da180f3c5e7036c8cdc81a157315789c409cbf7c63f672ad3fec37ac966afc3"
} |
For the hex_display module, how does its CDFG structure compare with its code-level complexity and lint findings — summarize the design's size and any risk of unintended latches? | The hex_display module's CDFG contains 19 nodes and 352 edges (16 $mux nodes, 2 input ports, 1 output port, average degree 18.53), matching a compact RTL description of 59 lines of code with cyclomatic complexity 3, nesting depth 2, and 51 operators across 1 always block and 1 assign statement with 2 inputs and 1 outpu... | github_repos/corundum_corundum/fpga/lib/eth/example/DE2-115/fpga/rtl/hex_display.v | hex_display | graph_extractor+static_analyzer | [
{
"graph_type": "CDFG"
},
{
"analysis_type": "full"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[29052 chars elided]...
"node_count": 19,
"edge_count": 352,
"graph_properties": {
"node_types": {
"$mux": 16,
"port_input": 2,
"port_output": 1
},
"avg_degree": 18.53,
"module_name": "he... | multi_tool | graph_extractor+static_analyzer | compositional | 0bc7806510a0 | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the hex_display module, how does its CDFG structure compare with its code-level complexity and lint findings — summarize the design's size and any risk of unintended latches?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[29052 chars elided]...
"node_count... | 11ccc90ba42e | a51378b6973b | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/eth/example/DE2-115/fpga/rtl/hex_display.v",
"sha256": "ea22655727a677b17d5fa73929ef535aca235915a18d69e9091dd31b98efec1c"
} |
For the asic_or2 module, is it worth applying the recommended area optimization flow, considering its complexity metrics and the expected trade-offs in delay and power? | asic_or2 is a trivial combinational module with 2 inputs and 1 output, 1 assign statement, cyclomatic complexity 1, and only 7 lines of code, so there is little to optimize. The area-oriented flow is estimated to cut area by -15.0 and power by -10.0 at the cost of a 5.0 increase in delay, with aggressive sharing increa... | github_repos/aolofsson_oh/asiclib/hdl/asic_or2.v | asic_or2 | optimization_advisor+static_analyzer | [
{
"target_metric": "area"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommended_recipes": [
"synth -top asic_or2 -flatten",
"opt -full; share -aggressive; opt",
"abc -g gates -liberty stdcells.lib",
"opt_clean -purge"
],
"optimization_suggestions": [
{
"... | multi_tool | optimization_advisor+static_analyzer | compositional | 89ab332b60d9 | [{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the asic_or2 module, is it worth applying the recommended area optimization flow, considering its complexity metrics and the expected trade-offs in delay and power?
[optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommended_recipes": [
"synth -... | b533737e36ff | a55445760aef | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "asiclib/hdl/asic_or2.v",
"sha256": "1bc50f033ed43d715ebefdbe4d0696a4a64994d10cce497efb0eca89b0858cac"
} |
For the axi_ad9361_rx module, the CDFG analysis shows 4 instances of axi_ad9361_rx_channel and a high average node degree, and the delay-focused optimization analysis suggests logic duplication to reduce fanout — how do these results relate, and what trade-offs would pipelining and logic duplication bring if applied? | The CDFG for axi_ad9361_rx contains 76 nodes and 2010 edges with an average degree of 26.45, which reflects the high fanout (including 4 axi_ad9361_rx_channel instances) that motivates the delay-oriented suggestion to duplicate logic via splitnets -driver and pipeline arithmetic operations using register retiming. Thes... | github_repos/analogdevicesinc_hdl/library/axi_ad9361/axi_ad9361_rx.v | axi_ad9361_rx | graph_extractor+optimization_advisor | [
{
"graph_type": "CDFG"
},
{
"target_metric": "delay"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[43969 chars elided]...
"node_count": 76,
"edge_count": 2010,
"graph_properties": {
"node_types": {
"$reduce_or": 7,
"$mux": 2,
"$or": 5,
"$adff": 6,
"up_delay_cntrl": 1,
"axi_ad936... | multi_tool | graph_extractor+optimization_advisor | compositional | 45cf4145fb59 | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}] | Question: For the axi_ad9361_rx module, the CDFG analysis shows 4 instances of axi_ad9361_rx_channel and a high average node degree, and the delay-focused optimization analysis suggests logic duplication to reduce fanout — how do these results relate, and what trade-offs would pipelining and logic duplication bring if ... | 9927b168cc6b | a56e37b99644 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/axi_ad9361/axi_ad9361_rx.v",
"sha256": "a46b35b4a68105f532b1ae7c0a471ba5a211d52c00ca3af56eded37deb7e60d7"
} |
For the gearbox_32_66 module, I'm planning to run area optimization. Given that 5 of the 14 RTL signals couldn't be mapped to the netlist, is it worth pursuing the aggressive area recipe, and what trade-offs should I expect? | For gearbox_32_66, the cross-stage mapping only mapped 9 of 14 RTL signals, leaving 5 unmapped (reg, prev_word, gb33_slip, first_half, and slip_count), so optimization results may be less reliable for those parts. The area-focused recipe is estimated to improve area by -15.0 and power by -10.0, but at the cost of a 5.0... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/communication/gearbox_32_66.v | gearbox_32_66 | cross_stage_mapper+optimization_advisor | [
{},
{
"target_metric": "area"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"dout_valid": [
"dout_valid",
"gb33_dout_valid"
],
"gb33_dout_valid": [
"gb33_dout_valid"
],
"reg": [],
"clk": [
"clk"
],
"din": [
"din_valid",
"din"
],
"gb33_dout":... | multi_tool | cross_stage_mapper+optimization_advisor | compositional | af5b2bd15ed5 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}] | Question: For the gearbox_32_66 module, I'm planning to run area optimization. Given that 5 of the 14 RTL signals couldn't be mapped to the netlist, is it worth pursuing the aggressive area recipe, and what trade-offs should I expect?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"... | 0db51f07a359 | a64ebccf5f54 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/communication/gearbox_32_66.v",
"sha256": "a67ce7d59eddee45036f36097a64e6f0d81649c7b7037a954921bc27a86afd5c"
} |
For gearbox_32_66, how well does the RTL-to-netlist mapping line up with the module's internal structure — specifically, which internal registers were left unmapped, and how does that compare with the number of registers and signals reported in the source description of the module? | The RTL source of gearbox_32_66 has 4 regs among 7 total signals, and the mapping left 5 signals unmapped (reg, prev_word, gb33_slip, first_half, slip_count) out of 14 RTL signals, giving an alignment score of 64.29 with 9 mapped signals. The unmapped signals correspond to the module's internal state elements rather th... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/communication/gearbox_32_66.v | gearbox_32_66 | cross_stage_mapper+static_analyzer | [
{},
{
"analysis_type": "full"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"dout_valid": [
"dout_valid",
"gb33_dout_valid"
],
"gb33_dout_valid": [
"gb33_dout_valid"
],
"reg": [],
"clk": [
"clk"
],
"din": [
"din_valid",
"din"
],
"gb33_dout":... | multi_tool | cross_stage_mapper+static_analyzer | compositional | cf86ca8bfbad | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For gearbox_32_66, how well does the RTL-to-netlist mapping line up with the module's internal structure — specifically, which internal registers were left unmapped, and how does that compare with the number of registers and signals reported in the source description of the module?
[cross_stage_mapper {}]
{
... | b632284d222d | a64ebccf5f54 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/communication/gearbox_32_66.v",
"sha256": "a67ce7d59eddee45036f36097a64e6f0d81649c7b7037a954921bc27a86afd5c"
} |
For the cic_int module, is the RTL-to-gate-level mapping consistent with the source-level structure, and how does its code complexity relate to the netlist size? | The cic_int module's RTL-to-netlist mapping is fully clean with an alignment score of 100.0 and no unmapped signals, and this matches the simple source structure of just 1 input port and 0 outputs reported by full static analysis. Despite modest complexity (31 lines of code, cyclomatic complexity 3, nesting depth 3, 42... | github_repos/analogdevicesinc_hdl/library/util_cic/cic_int.v | cic_int | cross_stage_mapper+static_analyzer | [
{},
{
"analysis_type": "full"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"clk": [
"clk"
]
},
"alignment_score": 100.0,
"unmapped_elements": [],
"mapping_statistics": {
"rtl_signals": 1,
"netlist_wires": 160,
"netlist_cells": 0,
"mapped_signals": 1,
"unmapped_signals": 0
... | multi_tool | cross_stage_mapper+static_analyzer | compositional | 84eb335dec45 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the cic_int module, is the RTL-to-gate-level mapping consistent with the source-level structure, and how does its code complexity relate to the netlist size?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"clk": [
"clk"
]
},
"alignment_score": 100.0,
"u... | 3fde732a6f41 | a6ff54487b15 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/util_cic/cic_int.v",
"sha256": "3803fe7515ab23eb04f5b61e389dfb36d39374588fdf2d3ae737a076517c971e"
} |
For the module up_tpl_common, how does the structure shown in its CDFG relate to the delay-focused optimization advice — what key figures from each should I weigh before applying the suggested speed improvements? | The CDFG for up_tpl_common has 35 nodes and 588 edges (average degree 16.8) with mostly $eq and $mux logic plus 4 registers ($adffe and $adff), and the delay-targeted optimization estimates a delay reduction of -20.0 at the cost of about 10.0 more area and 5.0 more power. Given the high connectivity, suggestions like p... | github_repos/analogdevicesinc_hdl/library/jesd204/ad_ip_jesd204_tpl_common/up_tpl_common.v | up_tpl_common | graph_extractor+optimization_advisor | [
{
"graph_type": "CDFG"
},
{
"target_metric": "delay"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[27456 chars elided]...
"node_count": 35,
"edge_count": 588,
"graph_properties": {
"node_types": {
"$eq": 5,
"$mux": 5,
"$logic_not": 2,
"$logic_and": 1,
"$adffe": 1,
"$adff": 3,
... | multi_tool | graph_extractor+optimization_advisor | compositional | 10b9de2baf65 | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}] | Question: For the module up_tpl_common, how does the structure shown in its CDFG relate to the delay-focused optimization advice — what key figures from each should I weigh before applying the suggested speed improvements?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[27... | 1994c3610a90 | a705b91aa9e6 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/jesd204/ad_ip_jesd204_tpl_common/up_tpl_common.v",
"sha256": "a28190619952d4c99f40a29a998045a9893c279f370e54ba681ca4134da3416a"
} |
For the asic_clkicgand module, how does its structural complexity from the AIG view relate to its coding complexity, and is applying the area-focused optimization a good idea given the trade-offs? | The AIG of asic_clkicgand has 10 nodes (2 AND, 3 NOT, 1 D-latch) and 15 edges with an average degree of 1.5, matching the simple source description of 12 lines of code, cyclomatic complexity 2, and one always block. Area optimization is estimated to improve area by -15.0 and power by -10.0, at the cost of a 5.0 increas... | github_repos/aolofsson_oh/asiclib/hdl/asic_clkicgand.v | asic_clkicgand | graph_extractor+optimization_advisor+static_analyzer | [
{
"graph_type": "AIG"
},
{
"target_metric": "area"
},
{
"analysis_type": "full"
}
] | [graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_type": "AIG",
...[2324 chars elided]...
"node_count": 10,
"edge_count": 15,
"graph_properties": {
"node_types": {
"$_AND_": 2,
"$_NOT_": 3,
"$_DLATCH_N_": 1,
"port_input": 3,
"port_output": 1
},
"av... | multi_tool | graph_extractor+optimization_advisor+static_analyzer | compositional | eb47bb16869e | [{"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the asic_clkicgand module, how does its structural complexity from the AIG view relate to its coding complexity, and is applying the area-focused optimization a good idea given the trade-offs?
[graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_type": "AIG",
...[2324 chars elided]..... | f6a1b44340d0 | a71947a6a023 | train | glm-5.3 | 3 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "asiclib/hdl/asic_clkicgand.v",
"sha256": "8f528b06ca5fa1ff4b35376a15c07ba0cc5c4bbc1fc16fdbcb6c9a8e4e1fd153"
} |
For the frequency_monitor module, given its high code complexity and the delay-focused optimization suggestions, how much delay improvement is estimated and what are the trade-offs given the module's current structure? | The delay optimization for frequency_monitor is estimated to improve delay by -20.0 at the cost of 10.0 more area and 5.0 more power. This matters because the module is already complex, with 54 lines of code, cyclomatic complexity of 14, nesting depth of 7, and 224 operators, so the suggested register retiming and logi... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/debug/frequency_monitor.v | frequency_monitor | optimization_advisor+static_analyzer | [
{
"target_metric": "delay"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metric": "delay",
"recommended_recipes": [
"synth -top frequency_monitor",
"opt -fast",
"abc -fast -liberty stdcells.lib",
"opt_clean"
],
"optimization_suggestions": [
{
"type": "pipeline_insertion",
... | multi_tool | optimization_advisor+static_analyzer | compositional | ad9ef8d55899 | [{"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the frequency_monitor module, given its high code complexity and the delay-focused optimization suggestions, how much delay improvement is estimated and what are the trade-offs given the module's current structure?
[optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metri... | 3d5286c62b9b | a732eb254baa | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/debug/frequency_monitor.v",
"sha256": "8b3f275b0814d207755d43ea4b3ce0537d5ca2a2df81b2aa312a850adadca557"
} |
For the ct_idu_rf_fwd_preg module, how could I reduce its power, and what does its CDFG structure suggest about the complexity of that optimization? | The power optimization analysis suggests inserting clock gating for registers and isolating unused operands, with an estimated power improvement of -25.0 percent at the cost of possible area overhead. The CDFG of ct_idu_rf_fwd_preg has 42 nodes and 713 edges with an average degree of 16.98, indicating dense connectivit... | github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/idu/rtl/ct_idu_rf_fwd_preg.v | ct_idu_rf_fwd_preg | graph_extractor+optimization_advisor | [
{
"graph_type": "CDFG"
},
{
"target_metric": "power"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[36794 chars elided]...
"node_count": 42,
"edge_count": 713,
"graph_properties": {
"node_types": {
"$logic_and": 6,
"$eq": 12,
"$logic_not": 1,
"$reduce_or": 1,
"$pmux": 1,
"port_in... | multi_tool | graph_extractor+optimization_advisor | compositional | dfe8bb7482dd | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "power"}}] | Question: For the ct_idu_rf_fwd_preg module, how could I reduce its power, and what does its CDFG structure suggest about the complexity of that optimization?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[36794 chars elided]...
"node_count": 42,
"edge_count": 713,
... | 684ab904f309 | a7540a2ebebd | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/XUANTIE-RV/openc910",
"commit": "b91c90914c19f114d35c8f6b73408eb241ed847c",
"path": "C910_RTL_FACTORY/gen_rtl/idu/rtl/ct_idu_rf_fwd_preg.v",
"sha256": "ced59b49665f83f535296fa0a591c7152015fd2df9c9df44307310c1c07919a2"
} |
For gearbox_32_33, how well did the RTL signals survive into the netlist, and how complex is the module's dataflow behavior based on its DFG analysis? | Only 6 of the 11 RTL signals were mapped to the netlist (alignment score 54.55), leaving dout_valid, reg, storage, will, and holding unmapped even though the netlist contains 1270 wires. The DFG for gearbox_32_33 has 27 nodes and 1169 edges with an average degree of 43.3, dominated by 10 $mux nodes, indicating a highly... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/communication/gearbox_32_33.v | gearbox_32_33 | cross_stage_mapper+graph_extractor | [
{},
{
"graph_type": "DFG"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"dout_valid": [],
"reg": [],
"clk": [
"clk"
],
"din": [
"din_slip",
"aligned_din",
"din",
"din_valid"
],
"aligned_din": [
"aligned_din"
],
"dout": [
"dout"
],
... | multi_tool | cross_stage_mapper+graph_extractor | compositional | 1a21f576c9ce | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}] | Question: For gearbox_32_33, how well did the RTL signals survive into the netlist, and how complex is the module's dataflow behavior based on its DFG analysis?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"dout_valid": [],
"reg": [],
"clk": [
"clk"
],
"din":... | d7352e3c018e | a7c2e472211c | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/communication/gearbox_32_33.v",
"sha256": "4f2e4b4827963789b9acb9ad915b38e4e77a288d5f161bfd549d0f2c0e69674d"
} |
For gearbox_32_33, the RTL-to-netlist mapping shows several signals that could not be mapped. Given that, how well does the synthesized design look overall in terms of scale and mapped coverage, and which unmapped signals should be investigated? | The gearbox_32_33 netlist contains 1085 cells and 960 wires with an alignment score of 54.55, since only 6 of 11 RTL signals were mapped. The unmapped signals dout_valid, reg, storage, will, and holding should be investigated, even though the synthesis succeeded with an area of 1175.0 and a critical path of 374.37. | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/communication/gearbox_32_33.v | gearbox_32_33 | cross_stage_mapper+synthesis_tool | [
{},
{
"optimization_level": "medium"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"dout_valid": [],
"reg": [],
"clk": [
"clk"
],
"din": [
"din_slip",
"aligned_din",
"din",
"din_valid"
],
"aligned_din": [
"aligned_din"
],
"dout": [
"dout"
],
... | multi_tool | cross_stage_mapper+synthesis_tool | compositional | 4bf3ea092176 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For gearbox_32_33, the RTL-to-netlist mapping shows several signals that could not be mapped. Given that, how well does the synthesized design look overall in terms of scale and mapped coverage, and which unmapped signals should be investigated?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netl... | 6618937c10b3 | a7c2e472211c | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/communication/gearbox_32_33.v",
"sha256": "4f2e4b4827963789b9acb9ad915b38e4e77a288d5f161bfd549d0f2c0e69674d"
} |
For the module crc32_dat64, how well did the implementation preserve the original RTL signals, and does that fully reflect the module's complexity given its port and logic structure? | In crc32_dat64, all 7 RTL signals were preserved with an alignment score of 100.0 and 0 unmapped signals, though the netlist expanded to 255 wires. However, this simple mapping contrasts with the module's heavier logic content: 9 total ports, 38 assign statements, 2334 operators, and 403 lines of code with cyclomatic c... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/crc/crc32_dat64.v | crc32_dat64 | cross_stage_mapper+static_analyzer | [
{},
{
"analysis_type": "full"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"dat_in": [
"dat_in"
],
"x767": [
"x767"
],
"c0": [
"c0"
],
"crc_in": [
"crc_in"
],
"d0": [
"d0"
],
"crc_out": [
"crc_out"
],
"x31": [
"x31"
]
... | multi_tool | cross_stage_mapper+static_analyzer | compositional | f0ca0cb05007 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the module crc32_dat64, how well did the implementation preserve the original RTL signals, and does that fully reflect the module's complexity given its port and logic structure?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"dat_in": [
"dat_in"
],
"x767... | 411d42b53538 | a80bb71b9d00 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/crc/crc32_dat64.v",
"sha256": "6bc7e90553acee952fb15bdc036b309ad30ba2740cc8348b8c8ccfc854bda962"
} |
For the oh_clockor module, how does the CDFG structure compare to the RTL-to-netlist mapping results, and would applying the area-focused optimization suggestions be advisable given their estimated effects on delay and power? | The CDFG for oh_clockor contains 3 nodes and 3 edges, including a single $reduce_or node, while the mapping shows only 1 of 2 RTL signals mapped (clkout), with the output signal unmapped and an alignment score of 50.0. The area optimization is estimated to reduce area by -15.0 and power by -10.0, but it would increase ... | github_repos/aolofsson_oh/stdlib/rtl/oh_clockor.v | oh_clockor | cross_stage_mapper+graph_extractor+optimization_advisor | [
{},
{
"graph_type": "CDFG"
},
{
"target_metric": "area"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"clkout": [
"clkout"
],
"output": []
},
"alignment_score": 50.0,
"unmapped_elements": [
"output"
],
"mapping_statistics": {
"rtl_signals": 2,
"netlist_wires": 6,
"netlist_cells": 0,
"mapped_sig... | multi_tool | cross_stage_mapper+graph_extractor+optimization_advisor | compositional | 6275450b3c4e | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}] | Question: For the oh_clockor module, how does the CDFG structure compare to the RTL-to-netlist mapping results, and would applying the area-focused optimization suggestions be advisable given their estimated effects on delay and power?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
... | b78f168cd523 | a7e5b04acc5a | train | glm-5.3 | 3 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "stdlib/rtl/oh_clockor.v",
"sha256": "2c8a2099ee0b2d6ae23e9dabc4d710ac1651b376497b4ef5fbe8e4dec7fe5fc8"
} |
For the crc32_dat64 module, how well do the RTL signals carry over to the synthesized netlist, and what does synthesis cost in area, delay, and power? Consider the RTL-to-netlist signal mapping and the post-synthesis area, delay, and power results (optimized for delay/power at medium effort). | All 7 RTL signals in crc32_dat64 map one-to-one to the netlist with an alignment score of 100.0 and no unmapped signals. Synthesis yields an area of 157.0, a delay (critical path) of 227.9, and a power of 0.157, built from 156 xor6 cells plus 1 crc32_dat64_factor instance. | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/crc/crc32_dat64.v | crc32_dat64 | cross_stage_mapper+synthesis_tool | [
{},
{
"optimization_level": "medium"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"dat_in": [
"dat_in"
],
"x767": [
"x767"
],
"c0": [
"c0"
],
"crc_in": [
"crc_in"
],
"d0": [
"d0"
],
"crc_out": [
"crc_out"
],
"x31": [
"x31"
]
... | multi_tool | cross_stage_mapper+synthesis_tool | compositional | e27bded41064 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the crc32_dat64 module, how well do the RTL signals carry over to the synthesized netlist, and what does synthesis cost in area, delay, and power? Consider the RTL-to-netlist signal mapping and the post-synthesis area, delay, and power results (optimized for delay/power at medium effort).
[cross_stage_ma... | 204236e01bbe | a80bb71b9d00 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/crc/crc32_dat64.v",
"sha256": "6bc7e90553acee952fb15bdc036b309ad30ba2740cc8348b8c8ccfc854bda962"
} |
For the pcie_axil_master module, how do the CDFG statistics, the current synthesis results, and the area-focused optimization advice relate — is the suggested area optimization worth pursuing, and what are the trade-offs? | The CDFG of pcie_axil_master is dominated by control logic (567 $mux and 35 $pmux nodes, plus 417 $dffe registers, with avg_degree 26.81), which explains the large current implementation: area 12924.5, gate count 8646, delay 908.32, and power 8.646. The area optimization suggestions (mux sharing via muxcover and aggres... | github_repos/corundum_corundum/fpga/lib/pcie/rtl/pcie_axil_master.v | pcie_axil_master | graph_extractor+optimization_advisor+synthesis_tool | [
{
"graph_type": "CDFG"
},
{
"target_metric": "area"
},
{
"optimization_level": "medium"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[63672 chars elided]...
,
"$logic_and": 19,
"$logic_not": 19,
"$logic_or": 7,
"$le": 2,
"$eq": 32,
"$add": 6,
"$reduce_bool": 6,
"$shiftx": 2,
"$mux": 567,
"$reduce_an... | multi_tool | graph_extractor+optimization_advisor+synthesis_tool | compositional | e84a0c5ac11b | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the pcie_axil_master module, how do the CDFG statistics, the current synthesis results, and the area-focused optimization advice relate — is the suggested area optimization worth pursuing, and what are the trade-offs?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG... | e2efb488ab5d | a7b960cece7a | train | glm-5.3 | 3 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/pcie/rtl/pcie_axil_master.v",
"sha256": "4b66bd5dc9c5ed0c2616773a310e0deb6b3e0ecd7958f176a33b850feeaf7767"
} |
For ad_dds_cordic_pipe, does the dataflow graph structure help explain why the RTL-to-netlist mapping left something unmapped, and could you summarize the mapping quality alongside the DFG statistics? | The DFG for ad_dds_cordic_pipe has 24 nodes and 488 edges, including 3 $dff register nodes, while the mapping achieved an alignment score of 75.0 with 3 of 4 RTL signals mapped. The unmapped element 'reg' likely corresponds to those register ($dff) structures, since the netlist has 985 wires and 0 cells, indicating reg... | github_repos/analogdevicesinc_hdl/library/common/ad_dds_cordic_pipe.v | ad_dds_cordic_pipe | cross_stage_mapper+graph_extractor | [
{},
{
"graph_type": "DFG"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"dir_inv": [
"dir_inv"
],
"reg": [],
"clk": [
"clk"
],
"dir": [
"dir",
"dir_inv"
]
},
"alignment_score": 75.0,
"unmapped_elements": [
"reg"
],
"mapping_statistics": {
"rtl... | multi_tool | cross_stage_mapper+graph_extractor | compositional | 6f3eea502021 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}] | Question: For ad_dds_cordic_pipe, does the dataflow graph structure help explain why the RTL-to-netlist mapping left something unmapped, and could you summarize the mapping quality alongside the DFG statistics?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"dir_inv": [
"dir_i... | e4a61ca8d65b | a83521ee2480 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/common/ad_dds_cordic_pipe.v",
"sha256": "2c7b92ba6edd695c3604248fbd354b8324186309c97f980dd0589b5dd701333b"
} |
For ad_dds_cordic_pipe, based on its AIG representation and the area-focused optimization analysis, what does the circuit structure look like in terms of gate counts, and what area improvement could the suggested resource-sharing recipes achieve at what cost? | The AIG of ad_dds_cordic_pipe has 4674 nodes and 11366 edges, including 1992 AND gates, 2623 inverters, and 48 positive-edge D flip-flops, with an average node degree of 2.43. The area-targeted optimization (e.g., sharing arithmetic operators with "share -aggressive") estimates a -15.0 area improvement and -10.0 power ... | github_repos/analogdevicesinc_hdl/library/common/ad_dds_cordic_pipe.v | ad_dds_cordic_pipe | graph_extractor+optimization_advisor | [
{
"graph_type": "AIG"
},
{
"target_metric": "area"
}
] | [graph_extractor {"graph_type": "AIG"}]
{
"status": "success",
"graph_type": "AIG",
...[33422 chars elided]...
"node_count": 4674,
"edge_count": 11366,
"graph_properties": {
"node_types": {
"$_AND_": 1992,
"$_NOT_": 2623,
"$_DFF_P_": 48,
"port_input": 7,
"port_output": 4
... | multi_tool | graph_extractor+optimization_advisor | compositional | f574e8775712 | [{"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}] | Question: For ad_dds_cordic_pipe, based on its AIG representation and the area-focused optimization analysis, what does the circuit structure look like in terms of gate counts, and what area improvement could the suggested resource-sharing recipes achieve at what cost?
[graph_extractor {"graph_type": "AIG"}]
{
"stat... | 09e76f8c2380 | a83521ee2480 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/common/ad_dds_cordic_pipe.v",
"sha256": "2c7b92ba6edd695c3604248fbd354b8324186309c97f980dd0589b5dd701333b"
} |
For the crc32c_dat64_only module, the CDFG shows it decomposes almost entirely into xor6 gates — how does that structure relate to the code-level statistics, and what do the two views suggest about the module's size? | The control/data flow graph of crc32c_dat64_only contains 153 nodes and 1132 edges, with 148 of the nodes being xor6 gates plus 2 port_input and 2 port_output nodes. The source reflects this as 366 lines of code with 1544 operators and 32 assign statements, yet the cyclomatic complexity is only 4 with no lint warnings,... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/crc/crc32c_dat64_only.v | crc32c_dat64_only | graph_extractor+static_analyzer | [
{
"graph_type": "CDFG"
},
{
"analysis_type": "full"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[38870 chars elided]...
"node_count": 153,
"edge_count": 1132,
"graph_properties": {
"node_types": {
"crc32c_dat64_only_factor": 1,
"port_input": 2,
"port_output": 2,
"xor6": 148
},
"av... | multi_tool | graph_extractor+static_analyzer | compositional | ab40c2205b02 | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the crc32c_dat64_only module, the CDFG shows it decomposes almost entirely into xor6 gates — how does that structure relate to the code-level statistics, and what do the two views suggest about the module's size?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
..... | d07c0c3695dc | a863cc0be373 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/crc/crc32c_dat64_only.v",
"sha256": "666688a5a21649842b70c1db9e999c96d39b1496176894df16a19e338065bda3"
} |
For the module system_top, the area-focused optimization recommendations suggest aggressive resource sharing with an estimated delay increase; given the module's structure and complexity from the full analysis, is that trade-off worth pursuing, and how would you summarize the situation? | system_top is a simple structural top-level with cyclomatic complexity 1, nesting depth 0, 19 inout ports, 3 wires, 2 assign statements, and instantiations of system_wrapper, this, and various, so the aggressive sharing recipe mainly affects the instantiated logic rather than the top itself. The advisor estimates area ... | github_repos/analogdevicesinc_hdl/projects/common/coraz7s/system_top.v | system_top | optimization_advisor+static_analyzer | [
{
"target_metric": "area"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommended_recipes": [
"synth -top system_top -flatten",
"opt -full; share -aggressive; opt",
"abc -g gates -liberty stdcells.lib",
"opt_clean -purge"
],
"optimization_suggestions": [
{
... | multi_tool | optimization_advisor+static_analyzer | compositional | 12f520d96b8c | [{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the module system_top, the area-focused optimization recommendations suggest aggressive resource sharing with an estimated delay increase; given the module's structure and complexity from the full analysis, is that trade-off worth pursuing, and how would you summarize the situation?
[optimization_advisor... | 6e345f77fe83 | a89e2da0051d | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "projects/common/coraz7s/system_top.v",
"sha256": "53cbb04f1a38b818ee2e59aba4af887bfdedf14e6c32ac72dad0ddecd0896704"
} |
For the axil_crossbar module, how would applying the recommended area-optimization flow (including aggressive resource sharing) affect the current synthesis results, and what trade-offs should I expect? | The current synthesis of axil_crossbar uses 2 gates (one axil_crossbar_rd and one axil_crossbar_wr) with an area of 2.0, delay of 61.56, and power of 0.002, and the area-focused optimization (e.g., aggressive sharing of arithmetic operators) is estimated to improve area by -15.0 and power by -10.0. However, the delay i... | github_repos/corundum_corundum/fpga/lib/axi/rtl/axil_crossbar.v | axil_crossbar | optimization_advisor+synthesis_tool | [
{
"target_metric": "area"
},
{
"optimization_level": "medium"
}
] | [optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommended_recipes": [
"synth -top axil_crossbar -flatten",
"opt -full; share -aggressive; opt",
"abc -g gates -liberty stdcells.lib",
"opt_clean -purge"
],
"optimization_suggestions": [
{
... | multi_tool | optimization_advisor+synthesis_tool | compositional | e1fd0e3f5dca | [{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the axil_crossbar module, how would applying the recommended area-optimization flow (including aggressive resource sharing) affect the current synthesis results, and what trade-offs should I expect?
[optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"re... | eb96cdf640fd | a8a80b2aab07 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/axi/rtl/axil_crossbar.v",
"sha256": "f48acdb965988038196bc0742f2f18174a1ecd35386a061f634bc64ccf6adb27"
} |
For the oh_oai33 module, how does its structural complexity as seen in the CDFG compare with its source-code complexity and post-synthesis results, and what are the key figures for delay and power? | The CDFG for oh_oai33 has 13 nodes and 17 edges with an average degree of 1.31, composed of 4 $or nodes, 1 $and, 1 $not, 6 inputs and 1 output; the source has just 12 lines of code with cyclomatic complexity 1 and one assign statement, and synthesis at medium optimization yields 5 gates (4 $_OR_ and 1 $_NAND_) with an ... | github_repos/aolofsson_oh/stdlib/rtl/oh_oai33.v | oh_oai33 | graph_extractor+static_analyzer+synthesis_tool | [
{
"graph_type": "CDFG"
},
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[4498 chars elided]...
"node_count": 13,
"edge_count": 17,
"graph_properties": {
"node_types": {
"$and": 1,
"$not": 1,
"$or": 4,
"port_input": 6,
"port_output": 1
},
"avg_degree":... | multi_tool | graph_extractor+static_analyzer+synthesis_tool | compositional | fc4a71704e0c | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the oh_oai33 module, how does its structural complexity as seen in the CDFG compare with its source-code complexity and post-synthesis results, and what are the key figures for delay and power?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[4498 chars elided... | f09710921080 | a87e7724fe5f | train | glm-5.3 | 3 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "stdlib/rtl/oh_oai33.v",
"sha256": "d68ac908932fc2e7fa031732e33e3ebff1ebadd9c7980fab1dfd3755d93bd4b3"
} |
For the crc32c_dat64_only module, considering its DFG structure and the available delay optimization options, is pipelining or logic duplication the better fit, and what delay and area impact is expected? | The DFG for crc32c_dat64_only is a flat combinational network of 148 xor6 nodes (153 nodes, 1132 edges, average degree 7.4) with only input and output ports, so register retiming to pipeline the arithmetic is not applicable and logic duplication to reduce the 7.4 average fanout is the better fit. The delay optimization... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/crc/crc32c_dat64_only.v | crc32c_dat64_only | graph_extractor+optimization_advisor | [
{
"graph_type": "DFG"
},
{
"target_metric": "delay"
}
] | [graph_extractor {"graph_type": "DFG"}]
{
"status": "success",
"graph_type": "DFG",
...[38869 chars elided]...
"node_count": 153,
"edge_count": 1132,
"graph_properties": {
"node_types": {
"crc32c_dat64_only_factor": 1,
"port_input": 2,
"port_output": 2,
"xor6": 148
},
"avg_... | multi_tool | graph_extractor+optimization_advisor | compositional | c165f5f4f8af | [{"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}] | Question: For the crc32c_dat64_only module, considering its DFG structure and the available delay optimization options, is pipelining or logic duplication the better fit, and what delay and area impact is expected?
[graph_extractor {"graph_type": "DFG"}]
{
"status": "success",
"graph_type": "DFG",
...[38869 chars ... | 3b3b00c75196 | a863cc0be373 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/crc/crc32c_dat64_only.v",
"sha256": "666688a5a21649842b70c1db9e999c96d39b1496176894df16a19e338065bda3"
} |
For the ct_iu_mult module, how do the CDFG structure and the RTL-to-netlist signal mapping relate to the synthesized area, delay, and power results? In particular, what fraction of the RTL signals mapped successfully, which CDFG node dominates the arithmetic, and what were the final area, delay, and power figures? | In the CDFG for ct_iu_mult there are 116 nodes and 3039 edges, including a single multiplier_65x65_3_stage node, and of the 48 RTL signals 33 were mapped to the netlist (15 unmapped) out of 2687 netlist wires. After medium-effort synthesis targeting area, delay, and power, the module came out at area 1699.0, delay 439.... | github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/iu/rtl/ct_iu_mult.v | ct_iu_mult | cross_stage_mapper+graph_extractor+synthesis_tool | [
{},
{
"graph_type": "CDFG"
},
{
"optimization_level": "medium"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"iu_idu_ex2_pipe1_mult_inst_vld_dup2": [
"iu_idu_ex2_pipe1_mult_inst_vld_dup2"
],
"mult_ex4_result": [],
"iu_idu_ex2_pipe1_mult_inst_vld_dup1": [
"iu_idu_ex2_pipe1_mult_inst_vld_dup1"
],
"ex1_ins
...[2560 ... | multi_tool | cross_stage_mapper+graph_extractor+synthesis_tool | compositional | aeab6f76a1be | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the ct_iu_mult module, how do the CDFG structure and the RTL-to-netlist signal mapping relate to the synthesized area, delay, and power results? In particular, what fraction of the RTL signals mapped successfully, which CDFG node dominates the arithmetic, and what were the final area, delay, and power fig... | 28f44d73458e | a8dbd062ca1c | train | glm-5.3 | 3 | 3,300 | {
"repository": "https://github.com/XUANTIE-RV/openc910",
"commit": "b91c90914c19f114d35c8f6b73408eb241ed847c",
"path": "C910_RTL_FACTORY/gen_rtl/iu/rtl/ct_iu_mult.v",
"sha256": "4c7dd62c5cb049c1bf0caa02287d8ae6dc5fafdaa48879c420212f67b87931a2"
} |
For the test_axis_register_64 module, is it worth applying the suggested power optimizations like clock gating, given how the module is actually structured in the code? | The power optimization advisor suggests clock gating for registers and operand isolation, with an estimated power improvement of -25.0 percent but noting that clock gating adds timing complexity and may add area overhead. However, the static analysis shows test_axis_register_64 has 6 regs but 0 always blocks and 0 assi... | github_repos/corundum_corundum/fpga/lib/eth/lib/axis/tb/test_axis_register_64.v | test_axis_register_64 | optimization_advisor+static_analyzer | [
{
"target_metric": "power"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "power"}]
{
"status": "success",
"target_metric": "power",
"recommended_recipes": [
"synth -top test_axis_register_64",
"opt; share; opt",
"abc -g gates -liberty stdcells.lib",
"opt_clean; clockgate"
],
"optimization_suggestions": [
{
"type": "... | multi_tool | optimization_advisor+static_analyzer | compositional | d29ae7ed97ea | [{"tool": "optimization_advisor", "parameters": {"target_metric": "power"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the test_axis_register_64 module, is it worth applying the suggested power optimizations like clock gating, given how the module is actually structured in the code?
[optimization_advisor {"target_metric": "power"}]
{
"status": "success",
"target_metric": "power",
"recommended_recipes": [
"synth... | 392c13298771 | a94417596a3c | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/eth/lib/axis/tb/test_axis_register_64.v",
"sha256": "8c39a310bbd63aac8c189d15c559c6e2df3e2fa371ca7001f10316ce3c4d3824"
} |
For the axis_srl_fifo module, how does its RTL complexity compare to its synthesized gate-level structure, considering the source code metrics, the RTL-to-netlist signal mapping, and the size of the resulting AIG graph? | The axis_srl_fifo RTL is 155 lines of code with cyclomatic complexity 19 and 15 mapped signals out of 18 RTL signals (alignment score 83.33, with wire, full_reg, and empty_reg unmapped). After technology mapping, the AIG graph contains 4882 nodes and 12014 edges, including 1947 AND nodes, 2749 NOT nodes, and 160 DFFE f... | github_repos/corundum_corundum/fpga/lib/eth/lib/axis/rtl/axis_srl_fifo.v | axis_srl_fifo | cross_stage_mapper+graph_extractor+static_analyzer | [
{},
{
"graph_type": "AIG"
},
{
"analysis_type": "full"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"ptr_empty1": [
"ptr_empty1"
],
"rst": [
"rst"
],
"wire": [],
"clk": [
"clk"
],
"m_axis_tvalid": [
"m_axis_tvalid"
],
"full_reg": [],
"dec": [
"dec"
],
...[201 c... | multi_tool | cross_stage_mapper+graph_extractor+static_analyzer | compositional | 4314926abcb8 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the axis_srl_fifo module, how does its RTL complexity compare to its synthesized gate-level structure, considering the source code metrics, the RTL-to-netlist signal mapping, and the size of the resulting AIG graph?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"ptr_e... | 603c98abf6eb | a9667f15a44e | train | glm-5.3 | 3 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/eth/lib/axis/rtl/axis_srl_fifo.v",
"sha256": "b657b6592e9a31a5f88289cfd34b1504b2114443a1c4df0ba89d10b4235a3104"
} |
For the oh_fifo_sync module, how does the structure of its data-flow graph relate to its code complexity and its synthesized area and timing — in particular, does the size of the DFG match up with the gate count, and how do the complexity metrics compare with the optimized delay and power figures? | The DFG for oh_fifo_sync has 62 nodes and 528 edges with an average degree of 8.52, and it maps to 49 gates after medium-level optimization, giving an area of 62.0, a delay of 178.42, and power of 0.049. The RTL itself is small — 108 lines of code, cyclomatic complexity of 11, nesting depth of 5, and 207 operators acro... | github_repos/aolofsson_oh/stdlib/rtl/oh_fifo_sync.v | oh_fifo_sync | graph_extractor+static_analyzer+synthesis_tool | [
{
"graph_type": "DFG"
},
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [graph_extractor {"graph_type": "DFG"}]
{
"status": "success",
"graph_type": "DFG",
...[37647 chars elided]...
"node_count": 62,
"edge_count": 528,
"graph_properties": {
"node_types": {
"$and": 5,
"$not": 2,
"$eq": 4,
"$logic_not": 1,
"$add": 3,
"$sub": 1,
"$adffe... | multi_tool | graph_extractor+static_analyzer+synthesis_tool | compositional | 3a9bfdd6cdad | [{"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the oh_fifo_sync module, how does the structure of its data-flow graph relate to its code complexity and its synthesized area and timing — in particular, does the size of the DFG match up with the gate count, and how do the complexity metrics compare with the optimized delay and power figures?
[graph_ext... | 3bf01cf62216 | a8f18ba633d4 | train | glm-5.3 | 3 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "stdlib/rtl/oh_fifo_sync.v",
"sha256": "d5aa3f916aeaf4f9f90a2a816d6498429f33dab4ffe2e6032f19d7cf640706bd"
} |
For oh_fifo_sync, is the current delay-focused optimization strategy worthwhile given the module's complexity and current synthesis results? Summarize the trade-offs using its complexity metrics, the synthesized PPA figures, and the estimated delay-targeted improvements. | oh_fifo_sync is a moderately complex module (cyclomatic complexity 11, nesting depth 5, 207 operators across 108 lines of code) that currently synthesizes to 49 gates with an area of 62.0, delay of 178.42, and power of 0.049. The delay-focused optimization recipes, including pipeline insertion via register retiming and... | github_repos/aolofsson_oh/stdlib/rtl/oh_fifo_sync.v | oh_fifo_sync | optimization_advisor+static_analyzer+synthesis_tool | [
{
"target_metric": "delay"
},
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metric": "delay",
"recommended_recipes": [
"synth -top oh_fifo_sync",
"opt -fast",
"abc -fast -liberty stdcells.lib",
"opt_clean"
],
"optimization_suggestions": [
{
"type": "pipeline_insertion",
"d... | multi_tool | optimization_advisor+static_analyzer+synthesis_tool | compositional | 7bca7b349b47 | [{"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For oh_fifo_sync, is the current delay-focused optimization strategy worthwhile given the module's complexity and current synthesis results? Summarize the trade-offs using its complexity metrics, the synthesized PPA figures, and the estimated delay-targeted improvements.
[optimization_advisor {"target_metric... | d212008722f2 | a8f18ba633d4 | train | glm-5.3 | 3 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "stdlib/rtl/oh_fifo_sync.v",
"sha256": "d5aa3f916aeaf4f9f90a2a816d6498429f33dab4ffe2e6032f19d7cf640706bd"
} |
For the temp_sense module, how well do the RTL signals carry over to the gate-level netlist, and given that complexity, is a delay-focused optimization worth it? | In temp_sense only 5 of 18 RTL signals mapped to the netlist (alignment score 27.78, with 13 signals like timer, degrees_c, and half_clk unmapped), while the RTL itself is fairly complex with 4 always blocks, cyclomatic complexity 21, and 463 operators across 120 lines of code. A delay-targeted optimization is projecte... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/debug/temp_sense.v | temp_sense | cross_stage_mapper+optimization_advisor+static_analyzer | [
{},
{
"target_metric": "delay"
},
{
"analysis_type": "full"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"clk": [
"clk"
],
"degc_x2": [
"degc_x2"
],
"bcd_state": [],
"tsd_out": [
"tsd_out"
],
"degc_x14": [
"degc_x14"
],
"timer_max": [],
"timer": [],
"tsd_clr": [],
...[118 c... | multi_tool | cross_stage_mapper+optimization_advisor+static_analyzer | compositional | aaeadbdfa386 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the temp_sense module, how well do the RTL signals carry over to the gate-level netlist, and given that complexity, is a delay-focused optimization worth it?
[cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"clk": [
"clk"
],
"degc_x2": [
"degc_x2"
... | 7a8ce7ca9d9e | a979e9260814 | train | glm-5.3 | 3 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/debug/temp_sense.v",
"sha256": "ee15717f2de4c63ea9e1bb58f68c00661c397b6059dc9c4414af1c599998c320"
} |
For ad_ip_jesd204_tpl_adc_deframer, the RTL-to-netlist mapping shows an unmapped signal with a low alignment score, while its AIG structure shows a large number of connections. Can you summarize what these two views say about the module and whether the cross-stage correspondence looks trustworthy? | The RTL-to-netlist mapping only matched 1 of 2 RTL signals (the clk signal), leaving output unmapped for an alignment score of 50.0, while the AIG for ad_ip_jesd204_tpl_adc_deframer contains 6 nodes and 256 edges with an average degree of 42.67. Together these suggest the structural connectivity is dense (two ad_perfec... | github_repos/analogdevicesinc_hdl/library/jesd204/ad_ip_jesd204_tpl_adc/ad_ip_jesd204_tpl_adc_deframer.v | ad_ip_jesd204_tpl_adc_deframer | cross_stage_mapper+graph_extractor | [
{},
{
"graph_type": "AIG"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"clk": [
"clk"
],
"output": []
},
"alignment_score": 50.0,
"unmapped_elements": [
"output"
],
"mapping_statistics": {
"rtl_signals": 2,
"netlist_wires": 8,
"netlist_cells": 0,
"mapped_signals":... | multi_tool | cross_stage_mapper+graph_extractor | compositional | aeec0dbf036d | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "AIG"}}] | Question: For ad_ip_jesd204_tpl_adc_deframer, the RTL-to-netlist mapping shows an unmapped signal with a low alignment score, while its AIG structure shows a large number of connections. Can you summarize what these two views say about the module and whether the cross-stage correspondence looks trustworthy?
[cross_sta... | cd7d664e4ad5 | a9ad8db671de | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/jesd204/ad_ip_jesd204_tpl_adc/ad_ip_jesd204_tpl_adc_deframer.v",
"sha256": "0236834a20131d052e61673073b0030e7196823e2b4e27c9888be3375f4e684a"
} |
For gearbox_66_20, how do the structural metrics like line count and cyclomatic complexity compare with the synthesized area, and what does the flop count in the netlist suggest about the design? | gearbox_66_20 is a fairly small but logic-heavy module: 80 lines of code with cyclomatic complexity 10 and 341 operators, yet it synthesizes to 1712 gates and an area of 2352.0 at a delay of 540.61. The cell breakdown shows 66 $_DFFE_PP_ and 108 $_DFF_P_ flops, which is consistent with the 5 regs and 5 always blocks in... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/communication/gearbox_66_20.v | gearbox_66_20 | static_analyzer+synthesis_tool | [
{
"analysis_type": "full"
},
{
"optimization_level": "medium"
}
] | [static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "gearbox_66_20",
"port_count": {
"inputs": 3,
"outputs": 2,
"inouts": 0,
"total": 5
},
"signal_count": {
"wires": 0,
"regs": 5,
"parameters": 0,
"total": 5
},
"always_blocks": 5,
"assign_sta... | multi_tool | static_analyzer+synthesis_tool | compositional | a66ac003e045 | [{"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For gearbox_66_20, how do the structural metrics like line count and cyclomatic complexity compare with the synthesized area, and what does the flop count in the netlist suggest about the design?
[static_analyzer {"analysis_type": "full"}]
{
"status": "success",
"module_name": "gearbox_66_20",
"port_co... | 22b302db1310 | a9990a088671 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/communication/gearbox_66_20.v",
"sha256": "2d8fa256e5b48b820deedf355a9decf1bfa743b64708490bd76908e28445bc44"
} |
For the fpga_core module, how do the port and register statistics from a static code analysis compare with the structure shown in its CDFG, and what does this suggest about the design's overall complexity? | The static analysis reports 119 total ports (58 inputs and 61 outputs) and 19 regs, which matches the CDFG's 58 port_input nodes, 61 port_output nodes, and 19 $sdffe nodes. With 429 lines of code, a cyclomatic complexity of 16, and a dense CDFG of 173 nodes, 3721 edges, and an average degree of 21.51, fpga_core is a hi... | github_repos/corundum_corundum/fpga/lib/eth/example/HTG640/fpga_cxpt16/rtl/fpga_core.v | fpga_core | graph_extractor+static_analyzer | [
{
"graph_type": "CDFG"
},
{
"analysis_type": "full"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[56482 chars elided]...
"node_count": 173,
"edge_count": 3721,
"graph_properties": {
"node_types": {
"$logic_and": 2,
"$eq": 4,
"$sdffe": 19,
"$reduce_or": 2,
"$ne": 3,
"$reduce_boo... | multi_tool | graph_extractor+static_analyzer | compositional | 1cd5a16370dd | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the fpga_core module, how do the port and register statistics from a static code analysis compare with the structure shown in its CDFG, and what does this suggest about the design's overall complexity?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[56482 cha... | 80b275ec84bb | a99da3640f09 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/eth/example/HTG640/fpga_cxpt16/rtl/fpga_core.v",
"sha256": "546b4a8d4eaddc844c2d863a048590ab0eb564ad5c5ff147db0bce02eeb8d352"
} |
For crc_ethernet, how do its structural complexity and lint cleanliness compare with the potential gains from a delay-oriented optimization pass — is optimizing it straightforward? | crc_ethernet is structurally small but dense, with 8 ports (6 inputs, 2 outputs), 8 signals (3 wires, 5 regs), a single always block, 91 lines of code, cyclomatic complexity 7, nesting depth 5, and 283 operators, though it is lint-clean with no warnings. A delay-targeted optimization is estimated to improve delay by -2... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/crc/crc_ethernet.v | crc_ethernet | optimization_advisor+static_analyzer | [
{
"target_metric": "delay"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metric": "delay",
"recommended_recipes": [
"synth -top crc_ethernet",
"opt -fast",
"abc -fast -liberty stdcells.lib",
"opt_clean"
],
"optimization_suggestions": [
{
"type": "pipeline_insertion",
"d... | multi_tool | optimization_advisor+static_analyzer | compositional | cf91bf7c22fb | [{"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For crc_ethernet, how do its structural complexity and lint cleanliness compare with the potential gains from a delay-oriented optimization pass — is optimizing it straightforward?
[optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metric": "delay",
"recommended_recipes": ... | fef63211c904 | a9f721e66bdd | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/crc/crc_ethernet.v",
"sha256": "c57c67834a51314439ddb7017b274cc653b3e185ff0beb0db49e6c762fdd65ef"
} |
For the axi_ad9361_tdd_if module, how does the mix of cell types seen in its CDFG structure compare with the synthesized gate-level implementation, and what are the resulting delay, power, and area figures from the medium-level delay/power optimization run? | The CDFG of axi_ad9361_tdd_if contains 20 nodes and 34 edges, including 3 $and, 2 $xor, 2 $dff, and 2 $sdff operators, which map to a synthesized netlist of 10 gates comprising 2 $_AND_, 1 $_ANDNOT_, 1 $_NAND_, 2 $_XNOR_, 2 $_DFF_P_, and 2 $_SDFF_PP0_ cells. Synthesis at the medium optimization level reports a critical... | github_repos/analogdevicesinc_hdl/library/axi_ad9361/axi_ad9361_tdd_if.v | axi_ad9361_tdd_if | graph_extractor+synthesis_tool | [
{
"graph_type": "CDFG"
},
{
"optimization_level": "medium"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[7841 chars elided]...
"node_count": 20,
"edge_count": 34,
"graph_properties": {
"node_types": {
"$and": 3,
"$not": 1,
"$logic_or": 1,
"$xor": 2,
"$sdff": 2,
"$dff": 2,
"port_... | multi_tool | graph_extractor+synthesis_tool | compositional | ff0bfb42c9dd | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the axi_ad9361_tdd_if module, how does the mix of cell types seen in its CDFG structure compare with the synthesized gate-level implementation, and what are the resulting delay, power, and area figures from the medium-level delay/power optimization run?
[graph_extractor {"graph_type": "CDFG"}]
{
"statu... | 7661389a4521 | a9bd122faad5 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/axi_ad9361/axi_ad9361_tdd_if.v",
"sha256": "55934ddf40f09f0de96fccd0e7149fa705ccb6e1c7615dddaf16d0e358c19934"
} |
For the eth_phy_10g_rx_if module, how would you summarize its structure from the DFG analysis, and what area optimization approach would you take given the expected trade-offs? | The DFG for eth_phy_10g_rx_if contains 97 nodes and 1843 edges with an average degree of 19.0, dominated by 65 $add operators plus 4 $dffe and 3 $dff registers, along with one instance each of eth_phy_10g_rx_ber_mon, eth_phy_10g_rx_frame_sync, and eth_phy_10g_rx_watchdog. For area reduction, aggressive arithmetic resou... | github_repos/corundum_corundum/fpga/lib/eth/rtl/eth_phy_10g_rx_if.v | eth_phy_10g_rx_if | graph_extractor+optimization_advisor | [
{
"graph_type": "DFG"
},
{
"target_metric": "area"
}
] | [graph_extractor {"graph_type": "DFG"}]
{
"status": "success",
"graph_type": "DFG",
...[60290 chars elided]...
"node_count": 97,
"edge_count": 1843,
"graph_properties": {
"node_types": {
"$not": 1,
"$add": 65,
"$logic_and": 3,
"$logic_not": 1,
"$dffe": 4,
"$dff": 3,
... | multi_tool | graph_extractor+optimization_advisor | compositional | c1dd59cd6fce | [{"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}] | Question: For the eth_phy_10g_rx_if module, how would you summarize its structure from the DFG analysis, and what area optimization approach would you take given the expected trade-offs?
[graph_extractor {"graph_type": "DFG"}]
{
"status": "success",
"graph_type": "DFG",
...[60290 chars elided]...
"node_count": 9... | ec8407cd800f | a9d639334909 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/eth/rtl/eth_phy_10g_rx_if.v",
"sha256": "30ff48b0b1ad4dd08d0c3038eeb57a371758535e0a3f2883709cdc01a2289a70"
} |
For tim3_sec_top, the RTL-to-netlist mapping reports a perfect alignment — does the structural analysis of the module corroborate that, given its port and signal counts, and can you summarize how the mapping statistics compare to the module's declared signals? | Yes — tim3_sec_top has an alignment_score of 100.0 with 21 mapped signals and 0 unmapped, which is consistent with the structural analysis showing 21 of the 36 declared wires being mapped to a netlist containing 26 wires and 0 cells. The module itself is a simple structural wrapper with 31 total ports (25 inputs, 6 out... | github_repos/XUANTIE-RV_wujian100_open/soc/tim3.v | tim3_sec_top | cross_stage_mapper+static_analyzer | [
{},
{
"analysis_type": "full"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"pwrite": [
"pwrite",
"i_pwrite"
],
"paddr": [
"paddr"
],
"tim2_etb_trig": [
"tim2_etb_trig"
],
"presetn": [
"presetn"
],
"i_pwrite": [
"i_pwrite"
],
"pclk": [
... | multi_tool | cross_stage_mapper+static_analyzer | compositional | 0f4e61cb9d20 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For tim3_sec_top, the RTL-to-netlist mapping reports a perfect alignment — does the structural analysis of the module corroborate that, given its port and signal counts, and can you summarize how the mapping statistics compare to the module's declared signals?
[cross_stage_mapper {}]
{
"status": "success",... | 48709529feae | aa0322cbe597 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/XUANTIE-RV/wujian100_open",
"commit": "83e297583bb3454b688f9f27d6bc20ff3276ad32",
"path": "soc/tim3.v",
"sha256": "b911b0d929bd76aed940372f9ffe7765aeab8eed7aacbdabd54f0b185344a50c"
} |
For the axi_etrace module, I'm considering applying the suggested delay optimization and retiming-based pipelining, but I want to understand the code structure first. Given that the design is built from five sub-module instantiations and 70 total ports, is the estimated delay improvement worth the area and power penalt... | The delay-targeted optimization is estimated to improve delay by -20.0 at the cost of a 10.0 area increase and a 5.0 power increase, a trade-off the advisor explicitly flags as higher power and area for speed. Structurally, axi_etrace is a purely structural top level with 0 always blocks and 0 assign statements, 6 para... | github_repos/aolofsson_oh/etrace/hdl/axi_etrace.v | axi_etrace | optimization_advisor+static_analyzer | [
{
"target_metric": "delay"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metric": "delay",
"recommended_recipes": [
"synth -top axi_etrace",
"opt -fast",
"abc -fast -liberty stdcells.lib",
"opt_clean"
],
"optimization_suggestions": [
{
"type": "pipeline_insertion",
"des... | multi_tool | optimization_advisor+static_analyzer | compositional | 9f8e21faa246 | [{"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the axi_etrace module, I'm considering applying the suggested delay optimization and retiming-based pipelining, but I want to understand the code structure first. Given that the design is built from five sub-module instantiations and 70 total ports, is the estimated delay improvement worth the area and po... | eb951209c582 | aa51fb7081fd | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/aolofsson/oh",
"commit": "7edfcb5f0506fb854449fbe09598a7ec88bb2067",
"path": "etrace/hdl/axi_etrace.v",
"sha256": "b7a4eaf15be7ce34aa918f5a828cfcace0b298cf3115fd5fe15210af1c0a4a61"
} |
For the module avst2axis, the RTL-to-netlist mapping reported an alignment score and some unmapped elements, and the DFG extraction reported a certain number of nodes and edges — do these two views agree on how complete the design's signal connectivity is, and which signals remain a concern? | The mapping shows an alignment score of 91.67 with 11 of 12 RTL signals mapped and only the 'wire' element unmapped, while the DFG has 15 nodes (9 port_input and 6 port_output) but 0 edges and an average degree of 0.0, indicating no data dependencies were captured. So although the port mapping is nearly complete, the D... | github_repos/corundum_corundum/fpga/common/rtl/avst2axis.v | avst2axis | cross_stage_mapper+graph_extractor | [
{},
{
"graph_type": "DFG"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"rst": [
"rst"
],
"wire": [],
"avst_ready": [
"avst_ready"
],
"clk": [
"clk"
],
"axis_tlast": [
"axis_tlast"
],
"avst_valid": [
"avst_valid"
],
"axis_tuser": [
... | multi_tool | cross_stage_mapper+graph_extractor | compositional | afac59d0757b | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}] | Question: For the module avst2axis, the RTL-to-netlist mapping reported an alignment score and some unmapped elements, and the DFG extraction reported a certain number of nodes and edges — do these two views agree on how complete the design's signal connectivity is, and which signals remain a concern?
[cross_stage_map... | 2259a889d174 | aa8be4ce74f2 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/common/rtl/avst2axis.v",
"sha256": "714dd73a9c6642011e062368dec3a819cf82d3950ffd365fd96e4664ca843500"
} |
For the test_udp_arb_mux_4 module, the delay-focused optimization advisor proposes retiming and logic duplication; given the module's structure and complexity, is the pipelining suggestion reasonable, and what delay and power trade-offs should I expect if I apply the recommended delay recipes? | The suggestion is questionable because test_udp_arb_mux_4 has 0 always blocks, 0 assign statements, and only an instantiation of 'documentation', meaning there is little logic of its own to pipeline despite its 23 wires and 5 regs across 248 lines of code. If the delay recipes are applied anyway, the advisor estimates ... | github_repos/corundum_corundum/fpga/lib/eth/tb/test_udp_arb_mux_4.v | test_udp_arb_mux_4 | optimization_advisor+static_analyzer | [
{
"target_metric": "delay"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "delay"}]
{
"status": "success",
"target_metric": "delay",
"recommended_recipes": [
"synth -top test_udp_arb_mux_4",
"opt -fast",
"abc -fast -liberty stdcells.lib",
"opt_clean"
],
"optimization_suggestions": [
{
"type": "pipeline_insertion",
... | multi_tool | optimization_advisor+static_analyzer | compositional | 437cc312aa65 | [{"tool": "optimization_advisor", "parameters": {"target_metric": "delay"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the test_udp_arb_mux_4 module, the delay-focused optimization advisor proposes retiming and logic duplication; given the module's structure and complexity, is the pipelining suggestion reasonable, and what delay and power trade-offs should I expect if I apply the recommended delay recipes?
[optimization_... | 2532c796f7f6 | aa6923ee2ac5 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/eth/tb/test_udp_arb_mux_4.v",
"sha256": "33d8a8e53c74c391f195dbb7363ba29696fb2ab9cce2396b6007a3dba964423f"
} |
For the module ecc_encode_2bit, given its dataflow graph (DFG) structure and the area-focused optimization recommendations, is aggressive resource sharing likely to pay off, and what are the expected trade-offs? | The DFG for ecc_encode_2bit has only 3 nodes (a $reduce_xor, one input port, one output port) and 3 edges, so there is little logic for sharing -aggressive to actually share. The area optimization estimates an area improvement of -15.0 and power of -10.0, but at a delay cost of 5.0, which is likely not worthwhile given... | github_repos/pConst_basic_verilog/Advanced Synthesis Cookbook/ecc/ecc_2bit.v | ecc_encode_2bit | graph_extractor+optimization_advisor | [
{
"graph_type": "DFG"
},
{
"target_metric": "area"
}
] | [graph_extractor {"graph_type": "DFG"}]
{
"status": "success",
"graph_type": "DFG",
"node_count": 3,
"edge_count": 3,
"graph_properties": {
"node_types": {
"$reduce_xor": 1,
"port_input": 1,
"port_output": 1
},
"avg_degree": 1.0,
"module_name": "ecc_encode_2bit"
},
"error... | multi_tool | graph_extractor+optimization_advisor | compositional | fff5ba7b2638 | [{"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}] | Question: For the module ecc_encode_2bit, given its dataflow graph (DFG) structure and the area-focused optimization recommendations, is aggressive resource sharing likely to pay off, and what are the expected trade-offs?
[graph_extractor {"graph_type": "DFG"}]
{
"status": "success",
"graph_type": "DFG",
"node_c... | 815289674779 | aa68ba60c2c9 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/pConst/basic_verilog",
"commit": "2654273b2c4e556a98e806f3a19b52c9b3c74614",
"path": "Advanced Synthesis Cookbook/ecc/ecc_2bit.v",
"sha256": "8135bb4da4b45c1c0d90e1d5d5e4eec171c1059ad4291af8776868f39e241985"
} |
For the adrv9001_pack module, given its structural analysis results and the area-focused optimization suggestions, is applying the aggressive area optimization a good idea, and what cost in performance should I expect relative to the module's current complexity? | adrv9001_pack is a fairly complex module with 33 lines of code, a cyclomatic complexity of 8, a nesting depth of 6, and 462 operators across 2 always blocks, so the routing-complexity warning of aggressive sharing is a real concern. The area optimization with aggressive resource sharing is estimated to reduce area by -... | github_repos/analogdevicesinc_hdl/library/axi_adrv9001/adrv9001_pack.v | adrv9001_pack | optimization_advisor+static_analyzer | [
{
"target_metric": "area"
},
{
"analysis_type": "full"
}
] | [optimization_advisor {"target_metric": "area"}]
{
"status": "success",
"target_metric": "area",
"recommended_recipes": [
"synth -top adrv9001_pack -flatten",
"opt -full; share -aggressive; opt",
"abc -g gates -liberty stdcells.lib",
"opt_clean -purge"
],
"optimization_suggestions": [
{
... | multi_tool | optimization_advisor+static_analyzer | compositional | f5964c80c210 | [{"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the adrv9001_pack module, given its structural analysis results and the area-focused optimization suggestions, is applying the aggressive area optimization a good idea, and what cost in performance should I expect relative to the module's current complexity?
[optimization_advisor {"target_metric": "area"... | c596d0946989 | aa8d7967a57d | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/axi_adrv9001/adrv9001_pack.v",
"sha256": "d677670a6154d9f956b020ad32b7aad3dd43fae1004fe2300191705488aad498"
} |
For the axi_ad9625 module, how well do the RTL and netlist representations agree after synthesis, and do the unmapped signals show up in the DFG structure? Please summarize using the signal mapping, the DFG, and the synthesized area/delay/power results. | The RTL-to-netlist mapping achieved an alignment score of 89.19 with 33 of 37 RTL signals mapped, leaving 4 unmapped handshake signals (up_wack, up_rack, up_wack_s, up_rack_s). The DFG for axi_ad9625 has 45 nodes and 1733 edges (average degree 38.51), and synthesis at medium optimization gave an area of 72.0, gate coun... | github_repos/analogdevicesinc_hdl/library/axi_ad9625/axi_ad9625.v | axi_ad9625 | cross_stage_mapper+graph_extractor+synthesis_tool | [
{},
{
"graph_type": "DFG"
},
{
"optimization_level": "medium"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"rx_clk": [
"rx_clk"
],
"up_rstn": [
"up_rstn"
],
"up_wreq_s": [
"up_wreq_s"
],
"s_axi_arvalid": [
"s_axi_arvalid"
],
"up_wack": [],
"s_axi_rvalid": [
"s_axi_rva
...[1156 ... | multi_tool | cross_stage_mapper+graph_extractor+synthesis_tool | compositional | 8c4284edc282 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the axi_ad9625 module, how well do the RTL and netlist representations agree after synthesis, and do the unmapped signals show up in the DFG structure? Please summarize using the signal mapping, the DFG, and the synthesized area/delay/power results.
[cross_stage_mapper {}]
{
"status": "success",
"rtl... | 774ebcb84d24 | aaec59f7deb5 | train | glm-5.3 | 3 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/axi_ad9625/axi_ad9625.v",
"sha256": "74b5cd35ae334a822658b1aeda8413464ada80fe7f2ae8b6b2acef7ee3aa4743"
} |
For the plic_top module, how does its structural complexity from the CDFG analysis compare with its synthesized implementation, and what power optimization would you recommend given those synthesis results? | The CDFG of plic_top has 37 nodes and 61001 edges with an average degree of 1648.68, dominated by four plic_hart_arb instances, while synthesis produced 28 gates with an area of 30.0, a delay of 139.75, and power of 0.028. Since the four plic_hart_arb instances appear in both the CDFG and the cell breakdown, inserting ... | github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/plic/rtl/plic_top.v | plic_top | graph_extractor+optimization_advisor+synthesis_tool | [
{
"graph_type": "CDFG"
},
{
"target_metric": "power"
},
{
"optimization_level": "medium"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[61965 chars elided]...
"node_count": 37,
"edge_count": 61001,
"graph_properties": {
"node_types": {
"$logic_and": 4,
"$logic_or": 4,
"$mux": 4,
"plic_hart_arb": 4,
"csky_apb_1tox_matrix"... | multi_tool | graph_extractor+optimization_advisor+synthesis_tool | compositional | 5fec9711962e | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "power"}}, {"tool": "synthesis_tool", "parameters": {"optimization_level": "medium"}}] | Question: For the plic_top module, how does its structural complexity from the CDFG analysis compare with its synthesized implementation, and what power optimization would you recommend given those synthesis results?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[61965 ch... | 0347076cd557 | aad3a5e37410 | train | glm-5.3 | 3 | 3,300 | {
"repository": "https://github.com/XUANTIE-RV/openc910",
"commit": "b91c90914c19f114d35c8f6b73408eb241ed847c",
"path": "C910_RTL_FACTORY/gen_rtl/plic/rtl/plic_top.v",
"sha256": "4fd6189023d93401c2898bf9335f5a21f620e177fc448039867d6c86cb8b17b1"
} |
For the axi_ad9625 module, based on its CDFG structure and the area-focused optimization analysis, is aggressive resource sharing a good idea, and how large is the design it would affect? | The CDFG for axi_ad9625 has 45 nodes and 1733 edges with an average degree of 38.51, so it is already densely connected; the area optimization suggests resource sharing of arithmetic operators (share -aggressive) but warns that aggressive sharing increases routing complexity. The estimated gains are -15.0 area and -10.... | github_repos/analogdevicesinc_hdl/library/axi_ad9625/axi_ad9625.v | axi_ad9625 | graph_extractor+optimization_advisor | [
{
"graph_type": "CDFG"
},
{
"target_metric": "area"
}
] | [graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[33969 chars elided]...
"node_count": 45,
"edge_count": 1733,
"graph_properties": {
"node_types": {
"$or": 3,
"$adff": 3,
"axi_ad9625_channel": 1,
"axi_ad9625_if": 1,
"up_adc_common": 1,
... | multi_tool | graph_extractor+optimization_advisor | compositional | b927807b3d66 | [{"tool": "graph_extractor", "parameters": {"graph_type": "CDFG"}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}] | Question: For the axi_ad9625 module, based on its CDFG structure and the area-focused optimization analysis, is aggressive resource sharing a good idea, and how large is the design it would affect?
[graph_extractor {"graph_type": "CDFG"}]
{
"status": "success",
"graph_type": "CDFG",
...[33969 chars elided]...
"n... | 27ea36ffde4c | aaec59f7deb5 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/analogdevicesinc/hdl",
"commit": "c9a501d87a420d2e28aa9d931557bdb4122f3c4f",
"path": "library/axi_ad9625/axi_ad9625.v",
"sha256": "74b5cd35ae334a822658b1aeda8413464ada80fe7f2ae8b6b2acef7ee3aa4743"
} |
For the ct_vfmau_ff1_10bit module, how does its control-flow/data-flow structure relate to its code complexity, and is there anything concerning? Note the DFG has 12 nodes and 175 edges with an average degree of 14.58, and the static analysis reports a cyclomatic complexity of 2 with 43 operators. | The DFG for ct_vfmau_ff1_10bit is very dense for its size, with 12 nodes but 175 edges and an average degree of 14.58, dominated by 9 $eq nodes and a single $pmux, reflecting heavy multiplexing. In contrast, the source is simple: 36 lines of code, cyclomatic complexity 2, nesting depth 1, and 43 operators, with no lint... | github_repos/XUANTIE-RV_openc910/C910_RTL_FACTORY/gen_rtl/vfmau/rtl/ct_vfmau_ff1_10bit.v | ct_vfmau_ff1_10bit | graph_extractor+static_analyzer | [
{
"graph_type": "DFG"
},
{
"analysis_type": "full"
}
] | [graph_extractor {"graph_type": "DFG"}]
{
"status": "success",
"graph_type": "DFG",
...[19558 chars elided]...
"node_count": 12,
"edge_count": 175,
"graph_properties": {
"node_types": {
"$eq": 9,
"$pmux": 1,
"port_input": 1,
"port_output": 1
},
"avg_degree": 14.58,
"mod... | multi_tool | graph_extractor+static_analyzer | compositional | f892e7c639c8 | [{"tool": "graph_extractor", "parameters": {"graph_type": "DFG"}}, {"tool": "static_analyzer", "parameters": {"analysis_type": "full"}}] | Question: For the ct_vfmau_ff1_10bit module, how does its control-flow/data-flow structure relate to its code complexity, and is there anything concerning? Note the DFG has 12 nodes and 175 edges with an average degree of 14.58, and the static analysis reports a cyclomatic complexity of 2 with 43 operators.
[graph_ext... | d143ab0cb52d | ab66de6deeb8 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/XUANTIE-RV/openc910",
"commit": "b91c90914c19f114d35c8f6b73408eb241ed847c",
"path": "C910_RTL_FACTORY/gen_rtl/vfmau/rtl/ct_vfmau_ff1_10bit.v",
"sha256": "50e67d371e0aed7fd72d6ba0a386ba45cb75b3047f8789122401490f030da171"
} |
For the mdio_master module, given the RTL-to-netlist signal mapping results and the area-focused optimization recommendations, how well do the RTL signals carry over to the netlist, and what area improvement could the suggested resource-sharing and mux optimizations achieve at what cost? | In mdio_master, only 17 of 32 RTL signals mapped to the netlist (alignment score 53.12), with 15 registers like state_reg, bit_count_reg, and busy_reg left unmapped. Applying the recommended mux sharing and aggressive resource-sharing recipes is estimated to reduce area by -15.0 (and power by -10.0), though the trade-o... | github_repos/corundum_corundum/fpga/lib/eth/example/VCU118/fpga_25g/rtl/mdio_master.v | mdio_master | cross_stage_mapper+optimization_advisor | [
{},
{
"target_metric": "area"
}
] | [cross_stage_mapper {}]
{
"status": "success",
"rtl_to_netlist_mapping": {
"rst": [
"rst"
],
"wire": [],
"cmd_phy_addr": [
"cmd_phy_addr"
],
"clk": [
"clk"
],
"mdio_t": [
"mdio_t"
],
"mdio_i_reg": [],
"cmd_valid": [
"cmd_valid"
],
"st... | multi_tool | cross_stage_mapper+optimization_advisor | compositional | bed8bc39c962 | [{"tool": "cross_stage_mapper", "parameters": {}}, {"tool": "optimization_advisor", "parameters": {"target_metric": "area"}}] | Question: For the mdio_master module, given the RTL-to-netlist signal mapping results and the area-focused optimization recommendations, how well do the RTL signals carry over to the netlist, and what area improvement could the suggested resource-sharing and mux optimizations achieve at what cost?
[cross_stage_mapper ... | 357b76c416f8 | ab6b60e88d71 | train | glm-5.3 | 2 | 3,300 | {
"repository": "https://github.com/corundum/corundum",
"commit": "1ca0151b97af85aa5dd306d74b6bcec65904d2ce",
"path": "fpga/lib/eth/example/VCU118/fpga_25g/rtl/mdio_master.v",
"sha256": "63308070f3c1f13bb298f0e971ee5ff9fd161fe4070b5eddd85278f6dd043da3"
} |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.