The validator on ReplicaCAD's furniture converted to MJCF and on kitchen scenes built from it with the approved objects
662aab6 verified |
Download validator/kitchen_counter.md from earakely-scale/GenesisWorkbenchEnv-AgentEnv: direct link, hf CLI and curl.
- Browser
- Download file 2.77 kB
-
https://huggingface.co/datasets/earakely-scale/GenesisWorkbenchEnv-AgentEnv/resolve/main/validator/kitchen_counter.md
- Command line
-
hf download hf://datasets/earakely-scale/GenesisWorkbenchEnv-AgentEnv/validator/kitchen_counter.md
-
curl -L -o kitchen_counter.md https://huggingface.co/datasets/earakely-scale/GenesisWorkbenchEnv-AgentEnv/resolve/main/validator/kitchen_counter.md
2.77 kB
| # kitchen_counter: warn | |
| `kitchen_counter.xml` (kitchen_counter.xml), MuJoCo 3.17.0, 9 bodies, 152.0 kg, timestep 2 ms | |
| | | Check | What it found | | |
| |---|---|---| | |
| | ✓ | loads | loads in MuJoCo 3.17.0: 9 bodies, 56 geoms, 7 joints | | |
| | ✓ | mass-source | every colliding body has an explicit <inertial> | | |
| | ✓ | density | mass over the volume MuJoCo collides (convex hulls, so a hollow object reads low): drawer1_top 81 kg/m³ (5.0 kg), drawer1_bottom 81 kg/m³ (5.0 kg), drawer3 130 kg/m³ (4.0 kg), drawer4 141 kg/m³ (6.0 kg), drawer2_top 159 kg/m³ (4.0 kg), drawer2_middle 159 kg/m³ (4.0 kg) | | |
| | ⚠ | inertia | rotational inertia against a solid of the same mass filling its collision hull (1 = the same): body 0.01×, drawer2_top 5.83×, drawer2_middle 5.83×, drawer2_bottom 5.83×, drawer3 3.77×, drawer1_top 2.8× | | |
| | ✓ | centre-of-mass | every body's centre of mass is within its collision geometry's bounds | | |
| | ⚠ | friction | 47 of 47 colliding geoms have MuJoCo's default friction (1.0 sliding): none is set from a material | | |
| | ✓ | contact-softness | 47 of 47 colliding geoms use MuJoCo's default contact softness (solref 0.02 s) | | |
| | ✓ | hull-fill | no colliding mesh loses much to its convex hull | | |
| | ✓ | floating-pieces | every body's collision pieces touch each other | | |
| | ⚠ | visual-fit | these visual meshes reach beyond their collision geometry: what's drawn there doesn't collide, and what rests on it looks sunk in: body by 361.9 mm, drawer2_top by 46.1 mm, drawer2_middle by 46.1 mm, drawer2_bottom by 46.1 mm, drawer4 by 45.9 mm, drawer1_top by 35.1 mm | | |
| | ✓ | welded-bodies | 1 child bodies have no joint and move with their parent: body | | |
| | ✓ | joints | 7 hinge or slide joints: left_slide_top (slide, range [0.0, 0.5], damping 0.01), left_slide_bottom (slide, range [0.0, 0.5], damping 0.01), middle_slide_top (slide, range [0.0, 0.5], damping 0.01), middle_slide_middle (slide, range [0.0, 0.5], damping 0.01), middle_slide_bottom (slide, range [0.0, 0.5], damping 0.01), right_slide_top (slide, range [0.0, 0.5], damping 0.01), right_slide_bottom (slide, range [0.0, 0.5], damping 0.01) | | |
| | ✓ | fixed-to-world | its root is fixed to the world, as furniture is (kept with --keep-fixed) | | |
| | ✓ | starts-apart | no body starts inside another | | |
| | ✓ | settles | after 2 s on the floor nothing moves more than 0.0 mm or 0.0° in 0.2 s | | |
| | ✓ | no-overlap | settling: deepest at any moment none; once settled, between bodies none, into the floor none (allowed: 0.5 mm between bodies and 1 mm into the floor at rest, 3 mm at any moment) | | |
| | ✓ | joints-hold | left alone for 2 s, none of the 7 joints moves more than 5° or 5 mm | | |
| | ✓ | joints-reach | each of the 7 limited joints reaches both ends of its range when driven | | |