intent stringlengths 14 68 | vendor stringclasses 17
values | os stringclasses 21
values | category stringclasses 34
values | command stringlengths 6 379 | source stringclasses 2
values | command_original stringlengths 6 379 |
|---|---|---|---|---|---|---|
create operator user account with password | Extreme | exos | System | create account user operator-user-user-08 plaintextpwd123 | corpus | create account user operator-user-user-08 plaintextpwd123 |
remove SNMP agent address | SONiC | sonic | System | config snmpagentaddress del | corpus | config snmpagentaddress del |
limit bandwidth for host 192.168.1.85 to 20M | Mikrotik | routeros | System | /queue simple add name=Limit_Host_85 target=192.168.1.85/32 max-limit=20M/20M comment="Bandwidth limit for host 85" | corpus | /queue simple add name=Limit_Host_85 target=192.168.1.85/32 max-limit=20M/20M comment="Bandwidth limit for host 85" |
configure IPv6 DHCP client with tracing on subinterface | Nokia | srlinux | DHCP | set interface description subinterface type ipv6 admin-state dhcp-client trace-options trace | corpus | set interface description subinterface type ipv6 admin-state dhcp-client trace-options trace |
display packets with source in 192.168.95.0/24 | Wireshark | tshark | Protocols | ip.src == 192.168.95.0/24 | corpus | ip.src == 192.168.95.0/24 |
debug RFAPI NVEs for VN 10.0.0.1 | FRR | frr | Routing | debug rfapi-dev show nves vn 10.0.0.1 | corpus | debug rfapi-dev show nves vn 10.0.0.1 |
set request timeout value | Cisco | ios | Protocols | req-timeout | corpus | req-timeout |
set CPU time warning threshold to 10 | FRR | frr | System | service cputime-warning 10 | corpus | service cputime-warning 10 |
set BFD detect multiplier to 10 | FRR | frr | BFD | detect-multiplier 10 | corpus | detect-multiplier 10 |
login to vmhost jdm in chassis | Juniper | junos | System | request vmhost jdm login (InChassis Model) | corpus | request vmhost jdm login (InChassis Model) |
capture icmp traffic on docker0 interface | Wireshark | tshark | Interfaces | tshark -i docker0 -f "icmp and ip" | corpus | tshark -i docker0 -f "icmp and ip" |
show commit differences for specific revision | VyOS | vyos | Troubleshooting | show system commit diff <number> | corpus | show system commit diff <number> |
show interface error counters | SONiC | sonic | Troubleshooting | show interfaces errors | corpus | show interfaces errors |
enable link on ethernet1/43 interface | PAN-OS | panos | Interfaces | set network interface ethernet ethernet1/43 link-state up | corpus | set network interface ethernet ethernet1/43 link-state up |
configure service engine hostname | Cisco | ios | System | service-engine hostname | corpus | service-engine hostname |
enter data store configuration mode | Cisco | ios | Wireless | data-store | corpus | data-store |
set BGP neighbor local role strict | FRR | frr | BGP | neighbor PEER local-role LOCAL-ROLE strict-mode | corpus | neighbor PEER local-role LOCAL-ROLE strict-mode |
show specific prefix list sequence | FRR | frr | System | show ip prefix-list NAME seq NUM [json] | corpus | show ip prefix-list NAME seq NUM [json] |
show control plane running configuration | Cisco | ios | Troubleshooting | show running-config control-plane | corpus | show running-config control-plane |
capture dhcp traffic on docker0 to pcap | Wireshark | tshark | Interfaces | tshark -i docker0 -f "port 67" -w /tmp/capture_docker0_port_67.pcapng | corpus | tshark -i docker0 -f "port 67" -w /tmp/capture_docker0_port_67.pcapng |
clear gx-plus replay statistics | Juniper | junos | System | clear network-access gx-plus replay | corpus | clear network-access gx-plus replay |
configure loopback interface | SONiC | sonic | Interfaces | config interface loopback | corpus | config interface loopback |
create user with plaintext password | NVIDIA | nvue | AAA | nv set system aaa user secops-user password plaintextpwd123 | corpus | nv set system aaa user secops-user password plaintextpwd123 |
set telegraf influxdb destination url | VyOS | vyos | System | set service monitoring telegraf influxdb url <url> | corpus | set service monitoring telegraf influxdb url <url> |
show bgp routes | Aruba | aoscx | Protocols | show ip route bgp | corpus | show ip route bgp |
configure dhcp lease for mac to ip | Arista | eos | Interfaces | lease ip_address mac ip_address | corpus | lease ip_address mac ip_address |
enable dhcp on WAN 16 interface | Microsoft | powershell | Interfaces | Set-NetIPInterface -InterfaceAlias "WAN 16" -AddressFamily IPv4 -Dhcp Enabled | corpus | Set-NetIPInterface -InterfaceAlias "WAN 16" -AddressFamily IPv4 -Dhcp Enabled |
set conntrack log level to info or debug | VyOS | vyos | Troubleshooting | set system conntrack log log-level <info | debug> | corpus | set system conntrack log log-level <info | debug> |
configure ipv6 fib ecmp resilience for 2001:db8:0::/64 | Arista | eos | Static | ipv6 hardware fib ecmp resilience 2001:db8:0::/64 capacity 5 redundancy 3 | corpus | ipv6 hardware fib ecmp resilience 2001:db8:0::/64 capacity 5 redundancy 3 |
set write-quanta value between 1 and 64 | FRR | frr | System | write-quanta (1-64) | corpus | write-quanta (1-64) |
assign 10.255.0.26/32 to loopback0 subinterface 26 | Nokia | srlinux | Interfaces | set interface loopback0 subinterface 26 ipv4 address 10.255.0.26/32 | corpus | set interface loopback0 subinterface 26 ipv4 address 10.255.0.26/32 |
show transceiver dom on Ethernet11/1 | Arista | eos | Interfaces | show interface Ethernet11/1 transceiver dom | corpus | show interface Ethernet11/1 transceiver dom |
show ipv6 pim rpf for all vrfs | FRR | frr | System | show ipv6 pim vrf all rpf [json] | corpus | show ipv6 pim vrf all rpf [json] |
ping destination host | VyOS | vyos | Troubleshooting | ping <destination> | corpus | ping <destination> |
configure power over ethernet | Arista | eos | System | Power over Ethernet (PoE) | corpus | Power over Ethernet (PoE) |
show ip msdp mesh-group for all vrfs | FRR | frr | Routing | show ip msdp vrf all mesh-group json | corpus | show ip msdp vrf all mesh-group json |
disable Wi-Fi 8 adapter | Microsoft | powershell | Interfaces | Disable-NetAdapter -Name "Wi-Fi 8" -Confirm:$false | corpus | Disable-NetAdapter -Name "Wi-Fi 8" -Confirm:$false |
enable dhcp on Ethernet 20 interface | Microsoft | powershell | Interfaces | Set-NetIPInterface -InterfaceAlias "Ethernet 20" -AddressFamily IPv4 -Dhcp Enabled | corpus | Set-NetIPInterface -InterfaceAlias "Ethernet 20" -AddressFamily IPv4 -Dhcp Enabled |
set auto-config application timeout | Cisco | ios | Protocols | timeout (auto-config application) | corpus | timeout (auto-config application) |
capture ip traffic on wlan1 | Wireshark | tshark | Interfaces | tshark -i wlan1 -f "ip" | corpus | tshark -i wlan1 -f "ip" |
resolve dns name domain-node32.internal.lan | Microsoft | powershell | Protocols | Resolve-DnsName -Name "domain-node32.internal.lan" -Type A | corpus | Resolve-DnsName -Name "domain-node32.internal.lan" -Type A |
show igmp snooping groups with proxy | Arista | eos | Multicast | show ip igmp snooping groups proxy [VLAN_ID][PORT_INT][GROUPS][DATA local] | corpus | show ip igmp snooping groups proxy [VLAN_ID][PORT_INT][GROUPS][DATA local] |
configure interface to-P1 with address 10.0.0.1/30 | Nokia | sros | Interfaces | configure router interface "to-P1" address 10.0.0.1/30 port 1/1/1 | corpus | configure router interface "to-P1" address 10.0.0.1/30 port 1/1/1 |
view port trust mode and traffic class settings | Arista | eos | QoS | Port Settings – Trust Mode and Traffic Class | corpus | Port Settings – Trust Mode and Traffic Class |
configure BGP neighbor send-community settings | Arista | eos | System | neighbor [ipv4 [send-community [large]]| ipv6 | NAME | default | fe80::A:B:C:D% interface | interface] | corpus | neighbor [ipv4 [send-community [large]]| ipv6 | NAME | default | fe80::A:B:C:D% interface | interface] |
show DHCP server address ranges | SONiC | sonic | Troubleshooting | show dhcp_server range | corpus | show dhcp_server range |
power off specific fabric node device | Juniper | junos | System | request fabric administration power-off node-device | corpus | request fabric administration power-off node-device |
set EVPN ES fragment limit to 10 | FRR | frr | BGP | ead-es-frag evi-limit 10 | corpus | ead-es-frag evi-limit 10 |
show OSPF multi-area configuration | Cisco | ios | OSPF | show ip ospf multi–area | corpus | show ip ospf multi–area |
set description on ethernet-1/20 interface | Nokia | srlinux | Interfaces | set interface ethernet-1/20 description "Cloud Fabric Interconnect ether-1/20" | corpus | set interface ethernet-1/20 description "Cloud Fabric Interconnect ether-1/20" |
configure inactive MAC address peer-link behavior | Arista | eos | VLAN | inactive mac-address destination peer-link [direct | indirect] | corpus | inactive mac-address destination peer-link [direct | indirect] |
configure autorp discovery interval and timers | FRR | frr | System | autorp send-rp-discovery {scope (0-255) | interval (1-65535) | holdtime (0-65535)} | corpus | autorp send-rp-discovery {scope (0-255) | interval (1-65535) | holdtime (0-65535)} |
clear all IPv6 BGP neighbors | Arista | eos | BGP | clear ipv6 bgp neighbor [*] [vrf vrf_name] [reason message] | corpus | clear ipv6 bgp neighbor [*] [vrf vrf_name] [reason message] |
install new EOS software image | Arista | eos | System | Install the New EOS Image | corpus | Install the New EOS Image |
set RIP update timer value | VyOS | vyos | Protocols | set protocols rip timers update \<seconds> | corpus | set protocols rip timers update \<seconds> |
show LLDP neighbor table | SONiC | sonic | Troubleshooting | show lldp table | corpus | show lldp table |
add route for 10.0.31.0 network | Linux | linux | Protocols | route add -net 10.0.31.0 netmask 255.255.255.0 gw 192.168.3.1 | corpus | route add -net 10.0.31.0 netmask 255.255.255.0 gw 192.168.3.1 |
show management 50 network adapter | Microsoft | powershell | Interfaces | Get-NetAdapter -Name "Management 50" | corpus | Get-NetAdapter -Name "Management 50" |
backup current system configuration | Juniper | junos | System | request system software configuration-backup | corpus | request system software configuration-backup |
add swp58 to ospf area 0 in default vrf | NVIDIA | nvue | OSPF | nv set vrfs default router ospf area 0.0.0.0 member swp58 | corpus | nv set vrfs default router ospf area 0.0.0.0 member swp58 |
delete route 10.0.100.0/24 via eth0 | Linux | linux | Protocols | ip route del 10.0.100.0/24 dev eth0 | corpus | ip route del 10.0.100.0/24 dev eth0 |
set management 4 mtu to 5500 | Microsoft | powershell | Interfaces | Set-NetAdapter -Name "Management 4" -MtuSize 5500 | corpus | Set-NetAdapter -Name "Management 4" -MtuSize 5500 |
show ipv4 interface for Wi-Fi 31 | Microsoft | powershell | Interfaces | Get-NetIPInterface -InterfaceAlias "Wi-Fi 31" -AddressFamily IPv4 | corpus | Get-NetIPInterface -InterfaceAlias "Wi-Fi 31" -AddressFamily IPv4 |
capture tcp port 80 on docker0 to file | Wireshark | tshark | Interfaces | tshark -i docker0 -f "tcp port 80" -w /tmp/capture_docker0_tcp_port_80.pcapng | corpus | tshark -i docker0 -f "tcp port 80" -w /tmp/capture_docker0_tcp_port_80.pcapng |
match ip next-hop in route map | FRR | frr | System | match ip next-hop WORD | corpus | match ip next-hop WORD |
clear ospf6 authentication counters for interface | FRR | frr | System | clear ipv6 ospf6 [vrf VRF] auth-counters interface [IFNAME] | corpus | clear ipv6 ospf6 [vrf VRF] auth-counters interface [IFNAME] |
set ethernet 45 mtu to 6500 | Microsoft | powershell | Interfaces | Set-NetAdapter -Name "Ethernet 45" -MtuSize 6500 | corpus | Set-NetAdapter -Name "Ethernet 45" -MtuSize 6500 |
create ip-vrf vrf-cust-44 and enable | Nokia | srlinux | EVPN | set network-instance vrf-cust-44 type ip-vrf admin-state enable | corpus | set network-instance vrf-cust-44 type ip-vrf admin-state enable |
show ipv6 pim rp-info for all vrfs | FRR | frr | System | show ipv6 pim vrf all rp-info [X:X::X:X/M] [json] | corpus | show ipv6 pim vrf all rp-info [X:X::X:X/M] [json] |
show ospf routes matching 10. | Juniper | junos | OSPF | show route protocol ospf terse | match 10\. | corpus | show route protocol ospf terse | match 10\. |
show ipv4 interface for vEthernet 20 | Microsoft | powershell | Interfaces | Get-NetIPInterface -InterfaceAlias "vEthernet 20" -AddressFamily IPv4 | corpus | Get-NetIPInterface -InterfaceAlias "vEthernet 20" -AddressFamily IPv4 |
set isis spf-delay-ietf long-delay timer | VyOS | vyos | Protocols | set protocols isis spf-delay-ietf long-delay \<milliseconds> | corpus | set protocols isis spf-delay-ietf long-delay \<milliseconds> |
configure dspu physical unit sdlc | Cisco | ios | Protocols | dspu pu (SDLC) | corpus | dspu pu (SDLC) |
capture udp port 53 on docker0 to pcapng | Wireshark | tshark | Interfaces | tshark -i docker0 -f "udp port 53" -w /tmp/capture_docker0_udp_port_53.pcapng | corpus | tshark -i docker0 -f "udp port 53" -w /tmp/capture_docker0_udp_port_53.pcapng |
copy file from https url | Cisco | ios | System | copy https:// | corpus | copy https:// |
set ge-0/0/1 native vlan id to 1 | Juniper | junos | VLAN | set interfaces ge-0/0/1 unit 0 family ethernet-switching native-vlan-id 1 | corpus | set interfaces ge-0/0/1 unit 0 family ethernet-switching native-vlan-id 1 |
create vlan with id 430 | Extreme | exos | VLAN | create vlan Vlan-ID-430 | corpus | create vlan Vlan-ID-430 |
filter from specific bgp peer | Arista | eos | Routing | from 10.2.0.101 (12.0.0.101) | corpus | from 10.2.0.101 (12.0.0.101) |
add static route 10.10.10.0/24 via 10.0.0.2 | Juniper | junos | Static | set routing-options static route 10.10.10.0/24 next-hop 10.0.0.2 | corpus | set routing-options static route 10.10.10.0/24 next-hop 10.0.0.2 |
set system clock date | SONiC | sonic | System | config clock date | corpus | config clock date |
set swp23 mtu to 9000 | NVIDIA | nvue | Interfaces | nv set interface swp23 link mtu 9000 | corpus | nv set interface swp23 link mtu 9000 |
capture TCP port 80 on wlan1 | Wireshark | tshark | Interfaces | tshark -i wlan1 -f "tcp port 80" | corpus | tshark -i wlan1 -f "tcp port 80" |
set ge-0/0/4 IP address 192.168.10.1/24 | Juniper | junos | Interfaces | set interfaces ge-0/0/4 unit 0 family inet address 192.168.10.1/24 | corpus | set interfaces ge-0/0/4 unit 0 family inet address 192.168.10.1/24 |
capture port 161 on br0 | Wireshark | tshark | Interfaces | tshark -i br0 -f "port 161" | corpus | tshark -i br0 -f "port 161" |
show ipv6 ospf6 linkstate for 10.0.0.1 | FRR | frr | OSPFv3 | show ipv6 ospf6 vrf <MYNAME linkstate router 10.0.0.1 | corpus | show ipv6 ospf6 vrf <MYNAME linkstate router 10.0.0.1 |
enable firewall rule BlockTCP_3043 | Microsoft | powershell | Security | Set-NetFirewallRule -Name "BlockTCP_3043" -Enabled True | corpus | Set-NetFirewallRule -Name "BlockTCP_3043" -Enabled True |
show reference for interface address | Juniper | junos | System | help reference interfaces address | corpus | help reference interfaces address |
configure NAT settings | SONiC | sonic | NAT | config nat set | corpus | config nat set |
set vEthernet 10 MTU to 3500 | Microsoft | powershell | Interfaces | Set-NetAdapter -Name "vEthernet 10" -MtuSize 3500 | corpus | Set-NetAdapter -Name "vEthernet 10" -MtuSize 3500 |
add ethernet1/3 to partner zone | PAN-OS | panos | Security | set zone partner network layer3 ethernet1/3 | corpus | set zone partner network layer3 ethernet1/3 |
enable mtrace debugging | FRR | frr | Multicast | debug mtrace | corpus | debug mtrace |
create prefix-list MYNAME matching prefix with length | FRR | frr | AAA | ip prefix-list MYNAME (permit|deny) PREFIX le LEN ge LEN | corpus | ip prefix-list MYNAME (permit|deny) PREFIX le LEN ge LEN |
disable detailed zebra mpls debugging | FRR | frr | Routing | no debug zebra mpls detailed | corpus | no debug zebra mpls detailed |
set authentication failure rate limit | Cisco | ios | Security | security authentication failure rate | corpus | security authentication failure rate |
list available network interfaces | Wireshark | tshark | System | tshark -D | corpus | tshark -D |
send sharp opaque message | FRR | frr | System | sharp send opaque type (1-255) (1-1000) | corpus | sharp send opaque type (1-255) (1-1000) |
add static ARP entry for 192.168.61.254 | Linux | linux | Protocols | ip neigh add 192.168.61.254 lladdr 00:11:22:33:44:3d dev eth1 | corpus | ip neigh add 192.168.61.254 lladdr 00:11:22:33:44:3d dev eth1 |
show address assignment pool | Juniper | junos | System | show network-access addressassignment pool (View) | corpus | show network-access addressassignment pool (View) |
install license pak with call-home | Cisco | ios | System | license call-home install pak | corpus | license call-home install pak |
disable IPv6 link-local addresses | SONiC | sonic | System | config ipv6 disable link-local | corpus | config ipv6 disable link-local |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.