intent stringlengths 14 68 | vendor stringclasses 17
values | os stringclasses 21
values | category stringclasses 34
values | command stringlengths 6 379 | source stringclasses 2
values | command_original stringlengths 6 379 |
|---|---|---|---|---|---|---|
add description to egress MAC filter | Nokia | srlinux | ACL | set acl egress-mac-filtering acl-filter description entry match l2 ipv4 fragment destination-ip | corpus | set acl egress-mac-filtering acl-filter description entry match l2 ipv4 fragment destination-ip |
create user neteng-user with user role | NVIDIA | nvue | AAA | nv set system aaa user neteng-user role user | corpus | nv set system aaa user neteng-user role user |
configure multicast route for INTERFACE A.B.C.D | FRR | frr | System | ip mroute INTERFACE A.B.C.D [A.B.C.D] | corpus | ip mroute INTERFACE A.B.C.D [A.B.C.D] |
install new Junos OS software package | Juniper | junos | System | request system software add (Junos OS) | corpus | request system software add (Junos OS) |
create user operator-admin with admin role | NVIDIA | nvue | AAA | nv set system aaa user operator-admin role admin | corpus | nv set system aaa user operator-admin role admin |
configure privacy policy settings | Cisco | ios | Security | privacy-policy | corpus | privacy-policy |
enable OSPF opaque LSA | VyOS | vyos | OSPF | set protocols ospf parameters opaque-lsa | corpus | set protocols ospf parameters opaque-lsa |
apply egress MAC filter on interface input | Nokia | srlinux | ACL | set acl egress-mac-filtering interface interface-ref input | corpus | set acl egress-mac-filtering interface interface-ref input |
set default PBR IP feature | Arista | eos | System | default feature pbr ip [copy] | corpus | default feature pbr ip [copy] |
load PKI CRL file | Juniper | junos | System | request security pki crl load | corpus | request security pki crl load |
send logs to syslog host 192.168.100.5 | Huawei | vrp | System | info-center loghost 192.168.100.5 local0 info | corpus | [Huawei] info-center loghost 192.168.100.5 local0 info |
enable DHCP on vEthernet 8 IPv4 | Microsoft | powershell | Interfaces | Set-NetIPInterface -InterfaceAlias "vEthernet 8" -AddressFamily IPv4 -Dhcp Enabled | corpus | Set-NetIPInterface -InterfaceAlias "vEthernet 8" -AddressFamily IPv4 -Dhcp Enabled |
show SSH log entries | VyOS | vyos | Troubleshooting | show log ssh | corpus | show log ssh |
Configure TACACS login for specific VRF | VyOS | vyos | System | set system login tacacs vrf \<name> | corpus | set system login tacacs vrf \<name> |
Capture ICMP traffic on eth0 to pcapng file | Wireshark | tshark | Interfaces | tshark -i eth0 -f "icmp" -w /tmp/capture_eth0_icmp.pcapng | corpus | tshark -i eth0 -f "icmp" -w /tmp/capture_eth0_icmp.pcapng |
Configure BGP neighbor 10.255.100.25 with remote AS 65025 | NVIDIA | nvue | BGP | nv set vrfs default router bgp neighbor 10.255.100.25 remote-as 65025 | corpus | nv set vrfs default router bgp neighbor 10.255.100.25 remote-as 65025 |
Show passive monitoring flow statistics | Juniper | junos | System | show passive-monitoring flow | corpus | show passive-monitoring flow |
Add ethernet-1/60.0 to VRF vrf-cust-60 | Nokia | srlinux | Interfaces | set network-instance vrf-cust-60 interface ethernet-1/60.0 | corpus | set network-instance vrf-cust-60 interface ethernet-1/60.0 |
Capture IP traffic on docker0 interface | Wireshark | tshark | Interfaces | tshark -i docker0 -f "ip" | corpus | tshark -i docker0 -f "ip" |
Add tcp-established match to PROTECT-SNMP filter | Juniper | junos | ACL | set firewall filter PROTECT-SNMP term ALLOW-ESTABLISHED from tcp-established | corpus | set firewall filter PROTECT-SNMP term ALLOW-ESTABLISHED from tcp-established |
Configure RIPng in specific VRF | FRR | frr | RIPng | router ripng vrf MYNAME | corpus | router ripng vrf MYNAME |
Show DHCP server port bindings | SONiC | sonic | Interfaces | show dhcp_server port | corpus | show dhcp_server port |
Set IPv6 interface description | Arista | eos | Routing | IPv6 Description | corpus | IPv6 Description |
Show MPLS capacity status | Aruba | aoscx | MPLS | show capacities-status | include MPLS | corpus | show capacities-status | include MPLS |
Capture UDP traffic on loopback to pcapng | Wireshark | tshark | Interfaces | tshark -i lo -f "udp" -w /tmp/capture_lo_udp.pcapng | corpus | tshark -i lo -f "udp" -w /tmp/capture_lo_udp.pcapng |
Configure kernel crash dump settings | SONiC | sonic | System | config kdump | corpus | config kdump |
create vpp ipip tunnel interface | VyOS | vyos | Interfaces | set interfaces vpp ipip <vppipipN> | corpus | set interfaces vpp ipip <vppipipN> |
match local preference in route map | FRR | frr | Routing | match local-preference METRIC | corpus | match local-preference METRIC |
set vpn id for mpls | Cisco | ios | Security | vpn id (mpls) | corpus | vpn id (mpls) |
set bgp igp next hop cost resolution | Arista | eos | BGP | next-hop resolution rout igp-nexthop-cost protocol bgp | corpus | next-hop resolution rout igp-nexthop-cost protocol bgp |
show IPv4 interface Ethernet 50 | Microsoft | powershell | Interfaces | Get-NetIPInterface -InterfaceAlias "Ethernet 50" -AddressFamily IPv4 | corpus | Get-NetIPInterface -InterfaceAlias "Ethernet 50" -AddressFamily IPv4 |
filter sip invite to user32 | Wireshark | tshark | Protocols | sip.method == "INVITE" && sip.to.user == "user32" | corpus | sip.method == "INVITE" && sip.to.user == "user32" |
create admin role for user admin-admin | NVIDIA | nvue | AAA | nv set system aaa user admin-admin role admin | corpus | nv set system aaa user admin-admin role admin |
show dhcp scope 192.168.26.0 | Microsoft | powershell | Protocols | Get-DhcpServerv4Scope -ScopeId 192.168.26.0 | corpus | Get-DhcpServerv4Scope -ScopeId 192.168.26.0 |
enable ntp service | Aruba | aoscx | NTP | ntp enable | corpus | ntp enable |
attach system cpu policer to egress mac filter | Nokia | srlinux | QoS | set acl egress-mac-filtering policers system-cpu-policer | corpus | set acl egress-mac-filtering policers system-cpu-policer |
set ethernet1/41 layer3 uplink description | PAN-OS | panos | Interfaces | set network interface ethernet ethernet1/41 layer3 comment "Port-Binding-Uplink-eth1/41" | corpus | set network interface ethernet ethernet1/41 layer3 comment "Port-Binding-Uplink-eth1/41" |
set bgp update source interface | Arista | eos | Routing | update-source interface | corpus | update-source interface |
capture SYN packets on port 79 | Wireshark | tshark | Protocols | tcp.flags.syn == 1 && tcp.port == 79 | corpus | tcp.flags.syn == 1 && tcp.port == 79 |
capture IPv6 traffic on interface en0 | Wireshark | tshark | Interfaces | tshark -i en0 -f "ipv6" | corpus | tshark -i en0 -f "ipv6" |
set IPv6 MLD robustness value | FRR | frr | System | ipv6 mld robustness (1-255) | corpus | ipv6 mld robustness (1-255) |
configure system clock timezone | SONiC | sonic | System | config clock timezone | corpus | config clock timezone |
add DHCP helper 10.255.0.254 to VLAN 60 | Extreme | exos | VLAN | configure dhcp-relay add helper 10.255.0.254 vlan Vlan-ID-60 | corpus | configure dhcp-relay add helper 10.255.0.254 vlan Vlan-ID-60 |
capture ICMP traffic on lo | Wireshark | tshark | Interfaces | tshark -i lo -f "icmp" | corpus | tshark -i lo -f "icmp" |
clear enhanced loop-detect on all interfaces | Juniper | junos | System | clear loop-detect enhanced interface | corpus | clear loop-detect enhanced interface |
show status of Ethernet 48 | Microsoft | powershell | Interfaces | Get-NetAdapter -Name "Ethernet 48" | corpus | Get-NetAdapter -Name "Ethernet 48" |
delete static route | SONiC | sonic | System | config route del | corpus | config route del |
capture ICMP traffic on eth0 | Wireshark | tshark | Interfaces | tshark -i eth0 -f "icmp" | corpus | tshark -i eth0 -f "icmp" |
show IPv6 multicast groups | VyOS | vyos | Troubleshooting | show ipv6 groups | corpus | show ipv6 groups |
enable IPv6 OSPF area 1 | Cisco | ios | OSPF | ipv6 ospf 1 area 1 | corpus | ipv6 ospf 1 area 1 |
configure egress MAC filtering match list | Nokia | srlinux | ACL | set acl egress-mac-filtering match-list | corpus | set acl egress-mac-filtering match-list |
show optics diagnostics profile | Juniper | junos | Interfaces | show interfaces diagnostics opticsprofile | corpus | show interfaces diagnostics opticsprofile |
enable sflow on interface | VyOS | vyos | Interfaces | set system sflow interface <interface> | corpus | set system sflow interface <interface> |
create user secops-admin with password | NVIDIA | nvue | AAA | nv set system aaa user secops-admin password plaintextpwd123 | corpus | nv set system aaa user secops-admin password plaintextpwd123 |
enable default logging for IPv6 input filter | VyOS | vyos | ACL | set firewall ipv6 input filter default-log | corpus | set firewall ipv6 input filter default-log |
configure eBGP neighbor 10.0.0.2 in AS 65002 | Cisco | ios | BGP | router bgp 65001
neighbor 10.0.0.2 remote-as 65002 | curated | router bgp 65001
neighbor 10.0.0.2 remote-as 65002 |
configure eBGP neighbor 10.0.0.2 with IPv4 unicast | Cisco | nxos | BGP | router bgp 65001
neighbor 10.0.0.2 remote-as 65002
address-family ipv4 unicast | curated | router bgp 65001
neighbor 10.0.0.2 remote-as 65002
address-family ipv4 unicast |
configure external BGP group EXT peer 10.0.0.2 AS 65002 | Juniper | junos | BGP | set protocols bgp group EXT type external
set protocols bgp group EXT peer-as 65002
set protocols bgp group EXT neighbor 10.0.0.2 | curated | set protocols bgp group EXT type external
set protocols bgp group EXT peer-as 65002
set protocols bgp group EXT neighbor 10.0.0.2 |
configure eBGP neighbor 10.0.0.2 in AS 65002 | Arista | eos | BGP | router bgp 65001
neighbor 10.0.0.2 remote-as 65002 | curated | router bgp 65001
neighbor 10.0.0.2 remote-as 65002 |
configure eBGP neighbor 10.0.0.2 with update-source loopback | FRR | frr | BGP | router bgp 65001
neighbor 10.0.0.2 remote-as 65002
neighbor 10.0.0.2 update-source lo | curated | router bgp 65001
neighbor 10.0.0.2 remote-as 65002
neighbor 10.0.0.2 update-source lo |
configure BGP neighbor 10.0.0.2 remote-as 65002 | VyOS | vyos | BGP | set protocols bgp 65001 neighbor 10.0.0.2 remote-as 65002 | curated | set protocols bgp 65001 neighbor 10.0.0.2 remote-as 65002 |
configure BGP peer 10.0.0.2 AS 65002 on LoopBack0 | Huawei | vrp | BGP | bgp 65001
peer 10.0.0.2 as-number 65002
peer 10.0.0.2 connect-interface LoopBack0 | curated | bgp 65001
peer 10.0.0.2 as-number 65002
peer 10.0.0.2 connect-interface LoopBack0 |
configure eBGP neighbor 10.0.0.2 in AS 65002 | Aruba | aoscx | BGP | router bgp 65001
neighbor 10.0.0.2 remote-as 65002 | curated | router bgp 65001
neighbor 10.0.0.2 remote-as 65002 |
configure BGP neighbor 10.0.0.2 remote-as 65002 | FortiOS | fortios | BGP | config router bgp
set as 65001
config neighbor
edit 10.0.0.2
set remote-as 65002
next
end
end | curated | config router bgp
set as 65001
config neighbor
edit 10.0.0.2
set remote-as 65002
next
end
end |
configure BGP peer PEER at 10.0.0.2 with AS 65002 | PAN-OS | panos | BGP | set network virtual-router default protocol bgp enable yes
set network virtual-router default protocol bgp local-as 65001
set network virtual-router default protocol bgp peer-group EXT peer PEER peer-as 65002
set network virtual-router default protocol bgp peer-group EXT peer PEER peer-address ip 10.0.0.2 | curated | set network virtual-router default protocol bgp enable yes
set network virtual-router default protocol bgp local-as 65001
set network virtual-router default protocol bgp peer-group EXT peer PEER peer-as 65002
set network virtual-router default protocol bgp peer-group EXT peer PEER peer-address ip 10.0.0.2 |
configure BGP neighbor 10.0.0.2 remote-as 65002 | NVIDIA | nvue | BGP | nv set router bgp autonomous-system 65001
nv set vrf default router bgp neighbor 10.0.0.2 remote-as 65002 | curated | nv set router bgp autonomous-system 65001
nv set vrf default router bgp neighbor 10.0.0.2 remote-as 65002 |
configure BGP neighbor 10.0.0.2 peer-as 65002 | Nokia | srlinux | BGP | set / network-instance default protocols bgp autonomous-system 65001
set / network-instance default protocols bgp neighbor 10.0.0.2 peer-as 65002 | curated | set / network-instance default protocols bgp autonomous-system 65001
set / network-instance default protocols bgp neighbor 10.0.0.2 peer-as 65002 |
configure eBGP neighbor 10.0.0.2 in AS 65002 | SONiC | sonic | BGP | router bgp 65001
neighbor 10.0.0.2 remote-as 65002 | curated | router bgp 65001
neighbor 10.0.0.2 remote-as 65002 |
configure OSPF process 1 with network 10.0.0.0/24 in area 0 | Cisco | ios | OSPF | router ospf 1
router-id 1.1.1.1
network 10.0.0.0 0.0.0.255 area 0 | curated | router ospf 1
router-id 1.1.1.1
network 10.0.0.0 0.0.0.255 area 0 |
enable OSPF on Ethernet1/1 in area 0 with router-id 1.1.1.1 | Cisco | nxos | OSPF | feature ospf
router ospf UNDERLAY
router-id 1.1.1.1
interface Ethernet1/1
ip router ospf UNDERLAY area 0.0.0.0 | curated | feature ospf
router ospf UNDERLAY
router-id 1.1.1.1
interface Ethernet1/1
ip router ospf UNDERLAY area 0.0.0.0 |
enable OSPF on interface ge-0/0/0.0 in area 0 | Juniper | junos | OSPF | set protocols ospf area 0.0.0.0 interface ge-0/0/0.0 | curated | set protocols ospf area 0.0.0.0 interface ge-0/0/0.0 |
configure OSPF area 0 for network 10.0.0.0/24 | VyOS | vyos | OSPF | set protocols ospf parameters router-id 1.1.1.1
set protocols ospf area 0 network 10.0.0.0/24 | curated | set protocols ospf parameters router-id 1.1.1.1
set protocols ospf area 0 network 10.0.0.0/24 |
configure OSPF network 10.0.0.0/24 in area 0 | Huawei | vrp | OSPF | ospf 1 router-id 1.1.1.1
area 0.0.0.0
network 10.0.0.0 0.0.0.255 | curated | ospf 1 router-id 1.1.1.1
area 0.0.0.0
network 10.0.0.0 0.0.0.255 |
configure OSPF area 0 with router-id 1.1.1.1 | Aruba | aoscx | OSPF | router ospf 1
router-id 1.1.1.1
area 0.0.0.0 | curated | router ospf 1
router-id 1.1.1.1
area 0.0.0.0 |
configure OSPF network 10.0.0.0/24 in area 0 | FortiOS | fortios | OSPF | config router ospf
set router-id 1.1.1.1
config area
edit 0.0.0.0
next
end
config network
edit 1
set prefix 10.0.0.0 255.255.255.0
set area 0.0.0.0
next
end
end | curated | config router ospf
set router-id 1.1.1.1
config area
edit 0.0.0.0
next
end
config network
edit 1
set prefix 10.0.0.0 255.255.255.0
set area 0.0.0.0
next
end
end |
enable OSPF on ethernet1/1 in area 0 with router-id | PAN-OS | panos | OSPF | set network virtual-router default protocol ospf enable yes
set network virtual-router default protocol ospf router-id 1.1.1.1
set network virtual-router default protocol ospf area 0.0.0.0 interface ethernet1/1 enable yes | curated | set network virtual-router default protocol ospf enable yes
set network virtual-router default protocol ospf router-id 1.1.1.1
set network virtual-router default protocol ospf area 0.0.0.0 interface ethernet1/1 enable yes |
configure OSPF on networks 10.0.0.0/24 in backbone area | Mikrotik | routeros | OSPF | /routing ospf instance add name=default router-id=1.1.1.1
/routing ospf area add name=backbone area-id=0.0.0.0 instance=default
/routing ospf interface-template add area=backbone networks=10.0.0.0/24 | curated | /routing ospf instance add name=default router-id=1.1.1.1
/routing ospf area add name=backbone area-id=0.0.0.0 instance=default
/routing ospf interface-template add area=backbone networks=10.0.0.0/24 |
enable OSPF on interface swp1 in area 0 | NVIDIA | nvue | OSPF | nv set vrf default router ospf enable on
nv set vrf default router ospf router-id 1.1.1.1
nv set interface swp1 router ospf area 0 | curated | nv set vrf default router ospf enable on
nv set vrf default router ospf router-id 1.1.1.1
nv set interface swp1 router ospf area 0 |
configure OSPF on ethernet-1/1 in area 0 | Nokia | srlinux | OSPF | set / network-instance default protocols ospf instance 1 router-id 1.1.1.1
set / network-instance default protocols ospf instance 1 area 0.0.0.0 interface ethernet-1/1 | curated | set / network-instance default protocols ospf instance 1 router-id 1.1.1.1
set / network-instance default protocols ospf instance 1 area 0.0.0.0 interface ethernet-1/1 |
configure interface GigabitEthernet0/0 with IP 10.0.0.1/24 | Cisco | ios | Interfaces | interface GigabitEthernet0/0
description UPLINK
ip address 10.0.0.1 255.255.255.0
no shutdown | curated | interface GigabitEthernet0/0
description UPLINK
ip address 10.0.0.1 255.255.255.0
no shutdown |
configure interface Ethernet1/1 with IP 10.0.0.1/24 | Cisco | nxos | Interfaces | interface Ethernet1/1
description UPLINK
no switchport
ip address 10.0.0.1/24
no shutdown | curated | interface Ethernet1/1
description UPLINK
no switchport
ip address 10.0.0.1/24
no shutdown |
configure interface ge-0/0/0 with IP 10.0.0.1/24 | Juniper | junos | Interfaces | set interfaces ge-0/0/0 description UPLINK
set interfaces ge-0/0/0 unit 0 family inet address 10.0.0.1/24 | curated | set interfaces ge-0/0/0 description UPLINK
set interfaces ge-0/0/0 unit 0 family inet address 10.0.0.1/24 |
configure interface Ethernet1 with IP 10.0.0.1/24 | Arista | eos | Interfaces | interface Ethernet1
description UPLINK
no switchport
ip address 10.0.0.1/24 | curated | interface Ethernet1
description UPLINK
no switchport
ip address 10.0.0.1/24 |
configure ethernet eth0 with IP 10.0.0.1/24 | VyOS | vyos | Interfaces | set interfaces ethernet eth0 description UPLINK
set interfaces ethernet eth0 address 10.0.0.1/24 | curated | set interfaces ethernet eth0 description UPLINK
set interfaces ethernet eth0 address 10.0.0.1/24 |
configure vlan UNDERLAY with IP 10.0.0.1/24 | Extreme | exos | Interfaces | configure vlan UNDERLAY ipaddress 10.0.0.1 255.255.255.0 | curated | configure vlan UNDERLAY ipaddress 10.0.0.1 255.255.255.0 |
configure interface port1 with IP 10.0.0.1/24 | FortiOS | fortios | Interfaces | config system interface
edit port1
set alias UPLINK
set ip 10.0.0.1 255.255.255.0
set allowaccess ping https ssh
next
end | curated | config system interface
edit port1
set alias UPLINK
set ip 10.0.0.1 255.255.255.0
set allowaccess ping https ssh
next
end |
configure ethernet1/1 with IP 10.0.0.1/24 and UPLINK comment | PAN-OS | panos | Interfaces | set network interface ethernet ethernet1/1 layer3 ip 10.0.0.1/24
set network interface ethernet ethernet1/1 comment UPLINK | curated | set network interface ethernet ethernet1/1 layer3 ip 10.0.0.1/24
set network interface ethernet ethernet1/1 comment UPLINK |
add IP address 10.0.0.1/24 to ether1 with UPLINK comment | Mikrotik | routeros | Interfaces | /ip address add address=10.0.0.1/24 interface=ether1 comment=UPLINK | curated | /ip address add address=10.0.0.1/24 interface=ether1 comment=UPLINK |
set swp1 description to UPLINK and IP 10.0.0.1/24 | NVIDIA | nvue | Interfaces | nv set interface swp1 description UPLINK
nv set interface swp1 ip address 10.0.0.1/24 | curated | nv set interface swp1 description UPLINK
nv set interface swp1 ip address 10.0.0.1/24 |
enable ethernet-1/1 and add subinterface 0 with IP 10.0.0.1/24 | Nokia | srlinux | Interfaces | set / interface ethernet-1/1 admin-state enable
set / interface ethernet-1/1 subinterface 0 ipv4 address 10.0.0.1/24 | curated | set / interface ethernet-1/1 admin-state enable
set / interface ethernet-1/1 subinterface 0 ipv4 address 10.0.0.1/24 |
add IP address 10.0.0.1/24 to Ethernet0 | SONiC | sonic | Interfaces | sudo config interface ip add Ethernet0 10.0.0.1/24 | curated | sudo config interface ip add Ethernet0 10.0.0.1/24 |
add default route with next-hop 10.0.0.2 | Cisco | ios | Routing | ip route 0.0.0.0 0.0.0.0 10.0.0.2 | curated | ip route 0.0.0.0 0.0.0.0 10.0.0.2 |
add default route via 10.0.0.2 | Arista | eos | Routing | ip route 0.0.0.0/0 10.0.0.2 | curated | ip route 0.0.0.0/0 10.0.0.2 |
add default route via 10.0.0.2 | FRR | frr | Routing | ip route 0.0.0.0/0 10.0.0.2 | curated | ip route 0.0.0.0/0 10.0.0.2 |
add static default route next-hop 10.0.0.2 | VyOS | vyos | Routing | set protocols static route 0.0.0.0/0 next-hop 10.0.0.2 | curated | set protocols static route 0.0.0.0/0 next-hop 10.0.0.2 |
add default route via 10.0.0.2 | Extreme | exos | Routing | configure iproute add default 10.0.0.2 | curated | configure iproute add default 10.0.0.2 |
add static default route gateway 10.0.0.2 on port1 | FortiOS | fortios | Routing | config router static
edit 1
set dst 0.0.0.0 0.0.0.0
set gateway 10.0.0.2
set device port1
next
end | curated | config router static
edit 1
set dst 0.0.0.0 0.0.0.0
set gateway 10.0.0.2
set device port1
next
end |
add static default route via 10.0.0.2 on ethernet1/1 | PAN-OS | panos | Routing | set network virtual-router default routing-table ip static-route DEFAULT destination 0.0.0.0/0 nexthop ip-address 10.0.0.2 interface ethernet1/1 | curated | set network virtual-router default routing-table ip static-route DEFAULT destination 0.0.0.0/0 nexthop ip-address 10.0.0.2 interface ethernet1/1 |
add default route with gateway 10.0.0.2 | Mikrotik | routeros | Routing | /ip route add dst-address=0.0.0.0/0 gateway=10.0.0.2 | curated | /ip route add dst-address=0.0.0.0/0 gateway=10.0.0.2 |
add static default route via 10.0.0.2 | NVIDIA | nvue | Routing | nv set vrf default router static 0.0.0.0/0 via 10.0.0.2 | curated | nv set vrf default router static 0.0.0.0/0 via 10.0.0.2 |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.