Datasets:
image imagewidth (px) 360 5.57k | label class label 3
classes |
|---|---|
0explainer | |
0explainer | |
0explainer | |
0explainer | |
0explainer | |
0explainer | |
0explainer | |
0explainer | |
0explainer | |
0explainer | |
0explainer | |
0explainer | |
0explainer | |
0explainer | |
0explainer | |
0explainer | |
0explainer | |
0explainer | |
0explainer | |
0explainer | |
0explainer | |
0explainer | |
0explainer | |
0explainer | |
0explainer | |
1final | |
1final | |
1final | |
1final | |
1final | |
1final | |
1final | |
1final | |
1final | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw | |
2raw |
Nikon Z 30 handheld lunar burst, October 26, 2026
A handheld burst of the Moon shot by Khang Ly with a Nikon Z 30 and the Nikkor Z DX 50–250 mm at 250 mm, ISO 100, 1/250 s, 14-bit lossless NEF with a camera JPEG beside each frame, Continuous H (extended) release. The purpose was to test whether a cheap APS-C body and a kit telephoto can be stacked into a sharper, cleaner Moon than any single frame, with no tripod and no tracking.
Contents
raw/: 173 NEF + JPEG pairs (DSC_7956toDSC_8128), about 20 MB per NEF, straight from the card. The frames move by about 5 px between shots and must be aligned before any sharpness judgement.final/: the stack outputs.moon_stack_70pct_1.5x_linear.tifis the linear-light Bayer-drizzled stack of the sharpest 70 % of frames at 1.5× scale; themoon_final_*images are three renders of it (neutral, daylight white balance, and a saturation-boosted "mineral" version);compare_crop.jpgandtycho_single_vs_stack_2x.jpgcompare the best single frame with the stack.explainer/: the figures of the accompanying guide, includingstack_NNN.jpg, the stack after N frames from 1 to 108, anddata.jsonwith the per-stage numbers.
What was found
155 frames went into the stack and 108 passed the sharpness grade. Noise fell as √N (7.1× at 54 frames against 7.3× in theory), and the clean stack took sharpening a single frame cannot: limb blur 0.64 px against 0.83 px for the best single frame. Two pipeline notes that cost time: OpenCV's phaseCorrelate with a window writes into its inputs when they are views of a larger array, and rawpy's color_matrix is zeros until postprocess() has run, so the camera-to-sRGB matrix must be built from rgb_xyz_matrix as dcraw does.
Also worth knowing for anyone stacking Z 30 frames: the camera's NEF is spatially filtered from 1/4 s upwards even with long-exposure noise reduction off (single-pixel stars and hot pixels are clipped to their neighbourhood), while frames of 1/6 s and shorter, like these, are untouched. See the companion dataset khangly/z30-dark-frames.
Use
Load the NEFs with rawpy (raw_image_visible, black level 1008 on every channel, white level 16,383). The stacking pipeline (stack.py: grading, phase-correlation alignment on copies, Bayer drizzle, linear merge) is in the camera repository the dataset belongs to.
Licence: CC BY 4.0. Photographs by Khang Ly.
- Downloads last month
- 268