task_url stringlengths 30 116 | task_name stringlengths 2 86 | task_description stringlengths 0 14.4k | language_url stringlengths 2 53 | language_name stringlengths 1 52 | code stringlengths 0 61.9k | response_seed stringclasses 1
value | instruction_seed stringlengths 27 14.4k | _source stringclasses 1
value |
|---|---|---|---|---|---|---|---|---|
http://rosettacode.org/wiki/Luhn_test_of_credit_card_numbers | Luhn test of credit card numbers | The Luhn test is used by some credit card companies to distinguish valid credit card numbers from what could be a random selection of digits.
Those companies using credit card numbers that can be validated by the Luhn test have numbers that pass the following test:
Reverse the order of the digits in the number.
Tak... | #Cowgol | Cowgol | include "cowgol.coh";
# Given a string containing the digits of a credit card number,
# see if it passes the Luhn test.
sub luhn(card: [uint8]): (ok: uint8) is
# Scan ahead to last digit, counting digits
var n: uint8 := 0;
while [card] != 0 loop
n := n + 1;
card := @next card;
end loop... | Give a code snippet in #Cowgol
The Luhn test is used by some credit card companies to distinguish valid credit card numbers from what could be a random selection of digits.
Those companies using credit card numbers that can be validated by the Luhn test have numbers that pass the following test:
Reverse the order o... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Variadic_function | Variadic function | Task
Create a function which takes in a variable number of arguments and prints each one on its own line.
Also show, if possible in your language, how to call the function on a list of arguments constructed at runtime.
Functions of this type are also known as Variadic Functions.
Related task
Call a function... | #Coq | Coq |
Fixpoint Arity (A B: Set) (n: nat): Set := match n with
|O => B
|S n' => A -> (Arity A B n')
end.
| Give a code snippet in #Coq
Task
Create a function which takes in a variable number of arguments and prints each one on its own line.
Also show, if possible in your language, how to call the function on a list of arguments constructed at runtime.
Functions of this type are also known as Variadic Functions.
Rel... | christopher/rosetta-code | |
http://rosettacode.org/wiki/CSV_to_HTML_translation | CSV to HTML translation | Consider a simplified CSV format where all rows are separated by a newline
and all columns are separated by commas.
No commas are allowed as field data, but the data may contain
other characters and character sequences that would
normally be escaped when converted to HTML
Task
Create a function that takes a st... | #Bracmat | Bracmat | ( ( CSVtoHTML
= p q Character Speech swor rows row
. 0:?p
& :?swor:?rows
& ( @( !arg
: ?
( [!p ?Character "," ?Speech \n [?q ?
& !q:?p
& (tr.,(th.,!Character) (th.,!Speech))
!swor
: ?swor
... | Give a code snippet in #Bracmat
Consider a simplified CSV format where all rows are separated by a newline
and all columns are separated by commas.
No commas are allowed as field data, but the data may contain
other characters and character sequences that would
normally be escaped when converted to HTML
Task
... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Hunt_the_Wumpus | Hunt the Wumpus | This task has been flagged for clarification. Code on this page in its current state may be flagged incorrect once this task has been clarified. See this page's Talk page for discussion.
Create a simple implementation of the classic textual game Hunt The Wumpus.
The rules are:
The game is set in a cave that consists ... | #Haskell | Haskell | import System.Random
import System.IO
import Data.List
import Data.Char
import Control.Monad
-- Rooms
cave :: [[Int]]
cave = [
[1,4,7], [0,2,9], [1,3,11], [2,4,13], [0,3,5],
[4,6,14], [5,7,16], [0,6,8], [7,9,17], [1,8,10],
[9,11,18], [2,10,12], [11,13,19], [3,12,14], [5,13,15],
[14,... | Give a code snippet in #Haskell
This task has been flagged for clarification. Code on this page in its current state may be flagged incorrect once this task has been clarified. See this page's Talk page for discussion.
Create a simple implementation of the classic textual game Hunt The Wumpus.
The rules are:
The gam... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Sierpinski_triangle | Sierpinski triangle | Task
Produce an ASCII representation of a Sierpinski triangle of order N.
Example
The Sierpinski triangle of order 4 should look like this:
*
* *
* *
* * * *
* *
* * * *
... | #REXX | REXX | /*REXX program constructs and displays a Sierpinski triangle of up to around order 10k.*/
parse arg n mark . /*get the order of Sierpinski triangle.*/
if n=='' | n=="," then n=4 /*Not specified? Then use the default.*/
if mark=='' then mark= "*" ... | Give a code snippet in #REXX
Task
Produce an ASCII representation of a Sierpinski triangle of order N.
Example
The Sierpinski triangle of order 4 should look like this:
*
* *
* *
* * * *
* *
... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Harshad_or_Niven_series | Harshad or Niven series | The Harshad or Niven numbers are positive integers ≥ 1 that are divisible by the sum of their digits.
For example, 42 is a Harshad number as 42 is divisible by (4 + 2) without remainder.
Assume that the series is defined as the numbers in increasing order.
Task
The task is to create a function/method/... | #11l | 11l | F is_harshad(n)
R n % sum(String(n).map(ch -> Int(ch))) == 0
F harshad(num)
[Int] r
L(n) 1..
I is_harshad(n)
r [+]= n
I r.len == num
R r
print(harshad(20))
L(n) 1001..
I is_harshad(n)
print(n)
L.break | Give a code snippet in #11l
The Harshad or Niven numbers are positive integers ≥ 1 that are divisible by the sum of their digits.
For example, 42 is a Harshad number as 42 is divisible by (4 + 2) without remainder.
Assume that the series is defined as the numbers in increasing order.
Task
The task is... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Sieve_of_Eratosthenes | Sieve of Eratosthenes | This task has been clarified. Its programming examples are in need of review to ensure that they still fit the requirements of the task.
The Sieve of Eratosthenes is a simple algorithm that finds the prime numbers up to a given integer.
Task
Implement the Sieve of Eratosthenes algorithm, with the only allowed... | #LiveCode | LiveCode | function sieveE int
set itemdel to comma
local sieve
repeat with i = 2 to int
put i into sieve[i]
end repeat
put 2 into n
repeat while n < int
repeat with p = n to int step n
if p = n then
next repeat
else
put empty into si... | Give a code snippet in #LiveCode
This task has been clarified. Its programming examples are in need of review to ensure that they still fit the requirements of the task.
The Sieve of Eratosthenes is a simple algorithm that finds the prime numbers up to a given integer.
Task
Implement the Sieve of Eratosthenes ... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Hello_world/Text | Hello world/Text | Hello world/Text is part of Short Circuit's Console Program Basics selection.
Task
Display the string Hello world! on a text console.
Related tasks
Hello world/Graphical
Hello world/Line Printer
Hello world/Newbie
Hello world/Newline omission
Hello world/Standard error
Hello world/Web server
| #Fortran | Fortran | print *,"Hello world!" | Give a code snippet in #Fortran
Hello world/Text is part of Short Circuit's Console Program Basics selection.
Task
Display the string Hello world! on a text console.
Related tasks
Hello world/Graphical
Hello world/Line Printer
Hello world/Newbie
Hello world/Newline omission
Hello world/Standard error... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Vector_products | Vector products | A vector is defined as having three dimensions as being represented by an ordered collection of three numbers: (X, Y, Z).
If you imagine a graph with the x and y axis being at right angles to each other and having a third, z axis coming out of the page, then a triplet of numbers, (X, Y, Z) would repr... | #Prolog | Prolog |
dot_product([A1, A2, A3], [B1, B2, B3], Ans) :-
Ans is A1 * B1 + A2 * B2 + A3 * B3.
cross_product([A1, A2, A3], [B1, B2, B3], Ans) :-
T1 is A2 * B3 - A3 * B2,
T2 is A3 * B1 - A1 * B3,
T3 is A1 * B2 - A2 * B1,
Ans = [T1, T2, T3].
scala_triple(A, B, C, Ans) :-
cross_product(B, C, Temp),
... | Give a code snippet in #Prolog
A vector is defined as having three dimensions as being represented by an ordered collection of three numbers: (X, Y, Z).
If you imagine a graph with the x and y axis being at right angles to each other and having a third, z axis coming out of the page, then a triplet of n... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Pointers_and_references | Pointers and references |
Basic Data Operation
This is a basic data operation. It represents a fundamental action on a basic data type.
You may see other such operations in the Basic Data Operations category, or:
Integer Operations
Arithmetic |
Comparison
Boolean Operations
Bitwise |
Logical
String Operations
Concatenation |
Interpolation |... | #Toka | Toka | variable myvar #! stores 1 cell
| Give a code snippet in #Toka
Basic Data Operation
This is a basic data operation. It represents a fundamental action on a basic data type.
You may see other such operations in the Basic Data Operations category, or:
Integer Operations
Arithmetic |
Comparison
Boolean Operations
Bitwise |
Logical
String Operations
C... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Program_name | Program name | The task is to programmatically obtain the name used to invoke the program. (For example determine whether the user ran "python hello.py", or "python hellocaller.py", a program importing the code from "hello.py".)
Sometimes a multiline shebang is necessary in order to provide the script name to a language's internal A... | #Scheme | Scheme | #!/bin/sh
#|
exec csi -ss $0 ${1+"$@"}
exit
|#
(use posix)
(require-extension srfi-1) ; lists
(require-extension srfi-13) ; strings
(define (main args)
(let ((prog (cdr (program))))
(display (format "Program: ~a\n" prog))
(exit)))
(define (program)
(if (string=? (car (argv)) "csi")
(let ((s-index (list-in... | Give a code snippet in #Scheme
The task is to programmatically obtain the name used to invoke the program. (For example determine whether the user ran "python hello.py", or "python hellocaller.py", a program importing the code from "hello.py".)
Sometimes a multiline shebang is necessary in order to provide the script... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Subtractive_generator | Subtractive generator | A subtractive generator calculates a sequence of random numbers, where each number is congruent to the subtraction of two previous numbers from the sequence.
The formula is
r
n
=
r
(
n
−
i
)
−
r
(
n
−
j
)
(
mod
m
)
{\displaystyle r_{n}=r_{(n-i)}-r_{(n-j)}{\pmod {m}}}
for some fixed values of... | #PL.2FI | PL/I |
subtractive_generator: procedure options (main);
declare (r, s) (0:54) fixed binary (31);
declare (i, n, seed) fixed binary (31);
/* Bentley's initialization */
seed = 292929;
s(0) = seed; s(1) = 1;
/* Compute s2,s3,...,s54 using the subtractive formula sn = s(n-2) - s(n-1)(mod 10**9). */
... | Give a code snippet in #PL.2FI
A subtractive generator calculates a sequence of random numbers, where each number is congruent to the subtraction of two previous numbers from the sequence.
The formula is
r
n
=
r
(
n
−
i
)
−
r
(
n
−
j
)
(
mod
m
)
{\displaystyle r_{n}=r_{(n-i)}-r_{(n-j)}{\pmod ... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Hello_world/Graphical | Hello world/Graphical |
Task
Display the string Goodbye, World! on a GUI object (alert box, plain window, text area, etc.).
Related task
Hello world/Text
| #C | C | #include <gtk/gtk.h>
int main (int argc, char **argv) {
GtkWidget *window;
gtk_init(&argc, &argv);
window = gtk_window_new (GTK_WINDOW_TOPLEVEL);
gtk_window_set_title (GTK_WINDOW (window), "Goodbye, World");
g_signal_connect (G_OBJECT (window), "delete-event", gtk_main_quit, NULL);
gtk_widget_show_all (... | Give a code snippet in #C
Task
Display the string Goodbye, World! on a GUI object (alert box, plain window, text area, etc.).
Related task
Hello world/Text
| christopher/rosetta-code | |
http://rosettacode.org/wiki/Greatest_element_of_a_list | Greatest element of a list | Task
Create a function that returns the maximum value in a provided set of values,
where the number of values may not be known until run-time.
| #Java | Java | public static float max(float[] values) throws NoSuchElementException {
if (values.length == 0)
throw new NoSuchElementException();
float themax = values[0];
for (int idx = 1; idx < values.length; ++idx) {
if (values[idx] > themax)
themax = values[idx];
}
return themax;
} | Give a code snippet in #Java
Task
Create a function that returns the maximum value in a provided set of values,
where the number of values may not be known until run-time.
| christopher/rosetta-code | |
http://rosettacode.org/wiki/Execute_a_system_command | Execute a system command | Task
Run either the ls system command (dir on Windows), or the pause system command.
Related task
Get system command output
| #Locomotive_Basic | Locomotive Basic | LIST | Give a code snippet in #Locomotive_Basic
Task
Run either the ls system command (dir on Windows), or the pause system command.
Related task
Get system command output
| christopher/rosetta-code | |
http://rosettacode.org/wiki/Linear_congruential_generator | Linear congruential generator | The linear congruential generator is a very simple example of a random number generator.
All linear congruential generators use this formula:
r
n
+
1
=
a
×
r
n
+
c
(
mod
m
)
{\displaystyle r_{n+1}=a\times r_{n}+c{\pmod {m}}}
Where:
r
0
{\displaystyle r_{0}}
is a seed.
r
1
... | #X86_Assembly | X86 Assembly | ;x86-64 assembly code for Microsoft Windows
;Tested in windows 7 Enterprise Service Pack 1 64 bit
;With the AMD FX(tm)-6300 processor
;Assembled with NASM version 2.11.06
;Linked to C library with gcc version 4.9.2 (x86_64-win32-seh-rev1, Built by MinGW-W64 project)
;Assembled and linked with the following commands:... | Give a code snippet in #X86_Assembly
The linear congruential generator is a very simple example of a random number generator.
All linear congruential generators use this formula:
r
n
+
1
=
a
×
r
n
+
c
(
mod
m
)
{\displaystyle r_{n+1}=a\times r_{n}+c{\pmod {m}}}
Where:
r
0
{\display... | christopher/rosetta-code | |
http://rosettacode.org/wiki/World_Cup_group_stage | World Cup group stage | It's World Cup season (or at least it was when this page was created)!
The World Cup is an international football/soccer tournament that happens every 4 years. Countries put their international teams together in the years between tournaments and qualify for the tournament based on their performance in other internat... | #Elena | Elena | import system'routines;
import extensions;
public singleton program
{
static games := new string[]{"12", "13", "14", "23", "24", "34"};
static results := "000000";
nextResult()
{
var s := results;
if (results=="222222") { ^ false };
results := (results.toInt(3) + 1).toS... | Give a code snippet in #Elena
It's World Cup season (or at least it was when this page was created)!
The World Cup is an international football/soccer tournament that happens every 4 years. Countries put their international teams together in the years between tournaments and qualify for the tournament based on thei... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Long_multiplication | Long multiplication | Task
Explicitly implement long multiplication.
This is one possible approach to arbitrary-precision integer algebra.
For output, display the result of 264 * 264.
Optionally, verify your result against builtin arbitrary precision support.
The decimal representation of 264 is:
18,446,744,073,709,551,61... | #Ring | Ring |
decimals(0)
see pow(2,64)*pow(2,64) + nl
| Give a code snippet in #Ring
Task
Explicitly implement long multiplication.
This is one possible approach to arbitrary-precision integer algebra.
For output, display the result of 264 * 264.
Optionally, verify your result against builtin arbitrary precision support.
The decimal representation of 264 ... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Reverse_words_in_a_string | Reverse words in a string | Task
Reverse the order of all tokens in each of a number of strings and display the result; the order of characters within a token should not be modified.
Example
Hey you, Bub! would be shown reversed as: Bub! you, Hey
Tokens are any non-space characters separated by spaces (formally, white-space); t... | #Python | Python | text = '''\
---------- Ice and Fire ------------
fire, in end will world the say Some
ice. in say Some
desire of tasted I've what From
fire. favor who those with hold I
... elided paragraph last ...
Frost Robert -----------------------'''
for line in text.split('\n'): print(' '.join(line.split()[::-1])) | Give a code snippet in #Python
Task
Reverse the order of all tokens in each of a number of strings and display the result; the order of characters within a token should not be modified.
Example
Hey you, Bub! would be shown reversed as: Bub! you, Hey
Tokens are any non-space characters separated by spa... | christopher/rosetta-code | |
http://rosettacode.org/wiki/XML/Input | XML/Input | Given the following XML fragment, extract the list of student names using whatever means desired. If the only viable method is to use XPath, refer the reader to the task XML and XPath.
<Students>
<Student Name="April" Gender="F" DateOfBirth="1989-01-02" />
<Student Name="Bob" Gender="M" DateOfBirth="1990-03-04" /... | #BBC_BASIC | BBC BASIC | INSTALL @lib$+"XMLLIB"
xmlfile$ = "C:\students.xml"
PROC_initXML(xmlobj{}, xmlfile$)
level% = FN_skipTo(xmlobj{}, "Students", 0)
IF level%=0 ERROR 100, "Students not found"
REPEAT
IF FN_isTag(xmlobj{}) THEN
tag$ = FN_nextToken(xmlobj{})
IF LEFT$(tag$, ... | Give a code snippet in #BBC_BASIC
Given the following XML fragment, extract the list of student names using whatever means desired. If the only viable method is to use XPath, refer the reader to the task XML and XPath.
<Students>
<Student Name="April" Gender="F" DateOfBirth="1989-01-02" />
<Student Name="Bob" Gen... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Forest_fire | Forest fire |
This page uses content from Wikipedia. The original article was at Forest-fire model. The list of authors can be seen in the page history. As with Rosetta Code, the text of Wikipedia is available under the GNU FDL. (See links for details on variance)
Task
Implement the Drossel and Schwabl definition of the fores... | #REXX | REXX | ┌───────────────────────────elided version──────────────────────────┐
├─── original version has many more options & enhanced displays. ───┤
└───────────────────────────────────────────────────────────────────┘
| Give a code snippet in #REXX
This page uses content from Wikipedia. The original article was at Forest-fire model. The list of authors can be seen in the page history. As with Rosetta Code, the text of Wikipedia is available under the GNU FDL. (See links for details on variance)
Task
Implement the Drossel and S... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Hello_world/Text | Hello world/Text | Hello world/Text is part of Short Circuit's Console Program Basics selection.
Task
Display the string Hello world! on a text console.
Related tasks
Hello world/Graphical
Hello world/Line Printer
Hello world/Newbie
Hello world/Newline omission
Hello world/Standard error
Hello world/Web server
| #ALGOL_60 | ALGOL 60 | 'BEGIN'
OUTSTRING(1,'('Hello world!')');
SYSACT(1,14,1)
'END' | Give a code snippet in #ALGOL_60
Hello world/Text is part of Short Circuit's Console Program Basics selection.
Task
Display the string Hello world! on a text console.
Related tasks
Hello world/Graphical
Hello world/Line Printer
Hello world/Newbie
Hello world/Newline omission
Hello world/Standard erro... | christopher/rosetta-code | |
http://rosettacode.org/wiki/AKS_test_for_primes | AKS test for primes | The AKS algorithm for testing whether a number is prime is a polynomial-time algorithm based on an elementary theorem about Pascal triangles.
The theorem on which the test is based can be stated as follows:
a number
p
{\displaystyle p}
is prime if and only if all the coefficients of the polynomial ... | #8th | 8th |
with: a
: nextrow \ a -- a
len
[ ( drop [1] ),
( drop [1,1] ),
( ' n:+ y 1 slide 1 push ) ]
swap 2 min caseof ;
;with
with: n
: .x \ n --
dup
[ ( drop ),
( drop "x" . ),
( "x^" . . ) ]
swap 2 min caseof space ;
: .term \ coef exp -- ; om... | Give a code snippet in #8th
The AKS algorithm for testing whether a number is prime is a polynomial-time algorithm based on an elementary theorem about Pascal triangles.
The theorem on which the test is based can be stated as follows:
a number
p
{\displaystyle p}
is prime if and only if all the co... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Nim_game | Nim game | Nim game
You are encouraged to solve this task according to the task description, using any language you may know.
Nim is a simple game where the second player ─── if they know the trick ─── will always win.
The game has only 3 rules:
start with 12 tokens
each player takes 1, 2, or 3 tokens in tur... | #Ring | Ring |
# Project : CalmoSoft Nim Game
# Date : 16/04/2020-13:27:07
# Update : 31/03/2021-19:41:09
# Author : Gal Zsolt (~ CalmoSoft ~)
# Email : <calmosoft@gmail.com>
load "stdlib.ring"
load "guilib.ring"
limit = 4
limit1 = 1
limit2 = 3
limit3 = 5
limit4 = 7
match1 = limit1
match2 = limit2
match3 = limit3
match... | Give a code snippet in #Ring
Nim game
You are encouraged to solve this task according to the task description, using any language you may know.
Nim is a simple game where the second player ─── if they know the trick ─── will always win.
The game has only 3 rules:
start with 12 tokens
each player takes ... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Ramer-Douglas-Peucker_line_simplification | Ramer-Douglas-Peucker line simplification | Ramer-Douglas-Peucker line simplification
You are encouraged to solve this task according to the task description, using any language you may know.
The Ramer–Douglas–Peucker algorithm is a line simplification algorithm for reducing the number of points used to define its shape.
Task
Using the Ramer–Douglas–P... | #Racket | Racket | #lang racket
(require math/flonum)
;; points are lists of x y (maybe extensible to z)
;; x+y gets both parts as values
(define (x+y p) (values (first p) (second p)))
;; https://en.wikipedia.org/wiki/Distance_from_a_point_to_a_line
(define (⊥-distance P1 P2)
(let*-values
([(x1 y1) (x+y P1)]
[(x2 y2) (x+... | Give a code snippet in #Racket
Ramer-Douglas-Peucker line simplification
You are encouraged to solve this task according to the task description, using any language you may know.
The Ramer–Douglas–Peucker algorithm is a line simplification algorithm for reducing the number of points used to define its shape.
T... | christopher/rosetta-code | |
http://rosettacode.org/wiki/N%27th | N'th | Write a function/method/subroutine/... that when given an integer greater than or equal to zero returns a string of the number followed by an apostrophe then the ordinal suffix.
Example
Returns would include 1'st 2'nd 3'rd 11'th 111'th 1001'st 1012'th
Task
Use your routine to show here the output for at least t... | #Swift | Swift | func addSuffix(n:Int) -> String {
if n % 100 / 10 == 1 {
return "th"
}
switch n % 10 {
case 1:
return "st"
case 2:
return "nd"
case 3:
return "rd"
default:
return "th"
}
}
for i in 0...25 {
print("\(i)\(addSuffix(i)) ")
}
println()
for i in... | Give a code snippet in #Swift
Write a function/method/subroutine/... that when given an integer greater than or equal to zero returns a string of the number followed by an apostrophe then the ordinal suffix.
Example
Returns would include 1'st 2'nd 3'rd 11'th 111'th 1001'st 1012'th
Task
Use your routine to show... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Power_set | Power set | A set is a collection (container) of certain values,
without any particular order, and no repeated values.
It corresponds with a finite set in mathematics.
A set can be implemented as an associative array (partial mapping)
in which the value of each key-value pair is ignored.
Given a set S, the power set (or pow... | #JavaScript | JavaScript | function powerset(ary) {
var ps = [[]];
for (var i=0; i < ary.length; i++) {
for (var j = 0, len = ps.length; j < len; j++) {
ps.push(ps[j].concat(ary[i]));
}
}
return ps;
}
var res = powerset([1,2,3,4]);
load('json2.js');
print(JSON.stringify(res)); | Give a code snippet in #JavaScript
A set is a collection (container) of certain values,
without any particular order, and no repeated values.
It corresponds with a finite set in mathematics.
A set can be implemented as an associative array (partial mapping)
in which the value of each key-value pair is ignored.
... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Permutation_test | Permutation test | Permutation test
You are encouraged to solve this task according to the task description, using any language you may know.
A new medical treatment was tested on a population of
n
+
m
{\displaystyle n+m}
volunteers, with each volunteer randomly assigned either to a group of
n
{\displaystyle n}
treatment... | #Delphi | Delphi |
program Permutation_test;
{$APPTYPE CONSOLE}
uses
System.SysUtils;
procedure Comb(n, m: Integer; emit: TProc<TArray<Integer>>);
var
s: TArray<Integer>;
last: Integer;
procedure rc(i, next: Integer);
begin
for var j := next to n - 1 do
begin
s[i] := j;
if i = last then
emi... | Give a code snippet in #Delphi
Permutation test
You are encouraged to solve this task according to the task description, using any language you may know.
A new medical treatment was tested on a population of
n
+
m
{\displaystyle n+m}
volunteers, with each volunteer randomly assigned either to a group of
n... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Mian-Chowla_sequence | Mian-Chowla sequence | The Mian–Chowla sequence is an integer sequence defined recursively.
Mian–Chowla is an infinite instance of a Sidon sequence, and belongs to the class known as B₂ sequences.
The sequence starts with:
a1 = 1
then for n > 1, an is the smallest positive integer such that every pairwise sum
ai + aj
is distinct, fo... | #JavaScript | JavaScript | (() => {
'use strict';
// main :: IO ()
const main = () => {
const genMianChowla = mianChowlas();
console.log([
'Mian-Chowla terms 1-30:',
take(30)(
genMianChowla
),
'\nMian-Chowla terms 91-100:',
(
... | Give a code snippet in #JavaScript
The Mian–Chowla sequence is an integer sequence defined recursively.
Mian–Chowla is an infinite instance of a Sidon sequence, and belongs to the class known as B₂ sequences.
The sequence starts with:
a1 = 1
then for n > 1, an is the smallest positive integer such that every pa... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Literals/Floating_point | Literals/Floating point | Programming languages have different ways of expressing floating-point literals.
Task
Show how floating-point literals can be expressed in your language: decimal or other bases, exponential notation, and any other special features.
You may want to include a regular expression or BNF/ABNF/EBNF defining allowable fo... | #Lua | Lua | 3.14159
314.159E-2 | Give a code snippet in #Lua
Programming languages have different ways of expressing floating-point literals.
Task
Show how floating-point literals can be expressed in your language: decimal or other bases, exponential notation, and any other special features.
You may want to include a regular expression or BNF/AB... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Palindromic_gapful_numbers | Palindromic gapful numbers | Palindromic gapful numbers
You are encouraged to solve this task according to the task description, using any language you may know.
Numbers (positive integers expressed in base ten) that are (evenly) divisible by the number formed by the
first and last digit are known as gapful numbers.
Evenly divisible mea... | #Go | Go | package main
import "fmt"
func reverse(s uint64) uint64 {
e := uint64(0)
for s > 0 {
e = e*10 + (s % 10)
s /= 10
}
return e
}
func commatize(n uint) string {
s := fmt.Sprintf("%d", n)
le := len(s)
for i := le - 3; i >= 1; i -= 3 {
s = s[0:i] + "," + s[i:]
}
... | Give a code snippet in #Go
Palindromic gapful numbers
You are encouraged to solve this task according to the task description, using any language you may know.
Numbers (positive integers expressed in base ten) that are (evenly) divisible by the number formed by the
first and last digit are known as gapful numbe... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Ramer-Douglas-Peucker_line_simplification | Ramer-Douglas-Peucker line simplification | Ramer-Douglas-Peucker line simplification
You are encouraged to solve this task according to the task description, using any language you may know.
The Ramer–Douglas–Peucker algorithm is a line simplification algorithm for reducing the number of points used to define its shape.
Task
Using the Ramer–Douglas–P... | #REXX | REXX | /*REXX program uses the Ramer─Douglas─Peucker (RDP) line simplification algorithm for*/
/*───────────────────────────── reducing the number of points used to define its shape. */
parse arg epsilon pts /*obtain optional arguments from the CL*/
if epsilon='' | epsilon="," then epsilon= 1 ... | Give a code snippet in #REXX
Ramer-Douglas-Peucker line simplification
You are encouraged to solve this task according to the task description, using any language you may know.
The Ramer–Douglas–Peucker algorithm is a line simplification algorithm for reducing the number of points used to define its shape.
Tas... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Greatest_subsequential_sum | Greatest subsequential sum | Task
Given a sequence of integers, find a continuous subsequence which maximizes the sum of its elements, that is, the elements of no other single subsequence add up to a value larger than this one.
An empty subsequence is considered to have the sum of 0; thus if all elements are negative, the result must be th... | #Fortran | Fortran | program MaxSubSeq
implicit none
integer, parameter :: an = 11
integer, dimension(an) :: a = (/ -1, -2, 3, 5, 6, -2, -1, 4, -4, 2, -1 /)
integer, dimension(an,an) :: mix
integer :: i, j
integer, dimension(2) :: m
forall(i=1:an,j=1:an) mix(i,j) = sum(a(i:j))
m = maxloc(mix)
! a(m(1):m(2)) is the w... | Give a code snippet in #Fortran
Task
Given a sequence of integers, find a continuous subsequence which maximizes the sum of its elements, that is, the elements of no other single subsequence add up to a value larger than this one.
An empty subsequence is considered to have the sum of 0; thus if all elements ar... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Identity_matrix | Identity matrix | Task
Build an identity matrix of a size known at run-time.
An identity matrix is a square matrix of size n × n,
where the diagonal elements are all 1s (ones),
and all the other elements are all 0s (zeroes).
I
n
=
[
1
0
0
⋯
0
0
1
0
⋯
0
0
0
1
⋯
0
⋮
⋮
⋮
⋱
... | #Sinclair_ZX81_BASIC | Sinclair ZX81 BASIC | 10 INPUT S
20 DIM M(S,S)
30 FOR I=1 TO S
40 LET M(I,I)=1
50 NEXT I
60 FOR I=1 TO S
70 SCROLL
80 FOR J=1 TO S
90 PRINT M(I,J);
100 NEXT J
110 PRINT
120 NEXT I | Give a code snippet in #Sinclair_ZX81_BASIC
Task
Build an identity matrix of a size known at run-time.
An identity matrix is a square matrix of size n × n,
where the diagonal elements are all 1s (ones),
and all the other elements are all 0s (zeroes).
I
n
=
[
1
0
0
⋯
0
0
1
0
⋯... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Simple_turtle_graphics | Simple turtle graphics | The first turtle graphic discussed in Mindstorms: Children, Computers, and Powerful Ideas by Seymour Papert is a simple drawing of a house. It is a square with a triangle on top for the roof.
For a slightly more advanced audience, a more practical introduction to turtle graphics might be to draw a bar chart.
See imag... | #Perl | Perl | #!/usr/bin/perl
use strict; # https://rosettacode.org/wiki/Simple_turtle_graphics
use warnings;
use Tk;
use List::Util qw( max );
my $c; # the canvas
# turtle routines
my $pen = 1; # true for pendown, false for penup
my @location = (0, 0); # upper left corner
my $direction = 0; # 0 for East, increasing clockwi... | Give a code snippet in #Perl
The first turtle graphic discussed in Mindstorms: Children, Computers, and Powerful Ideas by Seymour Papert is a simple drawing of a house. It is a square with a triangle on top for the roof.
For a slightly more advanced audience, a more practical introduction to turtle graphics might be ... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Bulls_and_cows | Bulls and cows | Bulls and Cows
Task
Create a four digit random number from the digits 1 to 9, without duplication.
The program should:
ask for guesses to this number
reject guesses that are malformed
print the score for the guess
The score is computed as:
The player wins if the guess is the same as the random... | #BBC_BASIC | BBC BASIC | secret$ = ""
REPEAT
c$ = CHR$(&30 + RND(9))
IF INSTR(secret$, c$) = 0 secret$ += c$
UNTIL LEN(secret$) = 4
PRINT "Guess a four-digit number with no digit used twice."'
guesses% = 0
REPEAT
REPEAT
INPUT "Enter your guess: " guess$
IF LEN(... | Give a code snippet in #BBC_BASIC
Bulls and Cows
Task
Create a four digit random number from the digits 1 to 9, without duplication.
The program should:
ask for guesses to this number
reject guesses that are malformed
print the score for the guess
The score is computed as:
The player wins if ... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Compound_data_type | Compound data type |
Data Structure
This illustrates a data structure, a means of storing data within a program.
You may see other such structures in the Data Structures category.
Task
Create a compound data type:
Point(x,y)
A compound data type is one that holds multiple independent values.
Related task
Enumeration
S... | #PL.2FI | PL/I |
define structure
1 point,
2 x float,
2 y float;
| Give a code snippet in #PL.2FI
Data Structure
This illustrates a data structure, a means of storing data within a program.
You may see other such structures in the Data Structures category.
Task
Create a compound data type:
Point(x,y)
A compound data type is one that holds multiple independent values.
... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Named_parameters | Named parameters | Create a function which takes in a number of arguments which are specified by name rather than (necessarily) position, and show how to call the function. If the language supports reordering the arguments or optionally omitting some of them, note this.
Note:
Named parameters relies on being able to use the names give... | #R | R | divide <- function(numerator, denominator) {
numerator / denominator
}
divide(3, 2) # 1.5
divide(numerator=3, denominator=2) # 1.5
divide(n=3, d=2) # 1.5
divide(den=3, num=2) # 0.66
divide(den=3, 2) # 0.66
divide(3, num=2) # 0... | Give a code snippet in #R
Create a function which takes in a number of arguments which are specified by name rather than (necessarily) position, and show how to call the function. If the language supports reordering the arguments or optionally omitting some of them, note this.
Note:
Named parameters relies on being... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Arithmetic-geometric_mean/Calculate_Pi | Arithmetic-geometric mean/Calculate Pi | Almkvist Berndt 1988 begins with an investigation of why the agm is such an efficient algorithm, and proves that it converges quadratically. This is an efficient method to calculate
π
{\displaystyle \pi }
.
With the same notations used in Arithmetic-geometric mean, we can summarize the paper by writing:
π
... | #D | D | import std.bigint;
import std.conv;
import std.math;
import std.stdio;
BigInt IntSqRoot(BigInt value, BigInt guess) {
BigInt term;
do {
term = value / guess;
auto temp = term - guess;
if (temp < 0) {
temp = -temp;
}
if (temp <= 1) {
break;
... | Give a code snippet in #D
Almkvist Berndt 1988 begins with an investigation of why the agm is such an efficient algorithm, and proves that it converges quadratically. This is an efficient method to calculate
π
{\displaystyle \pi }
.
With the same notations used in Arithmetic-geometric mean, we can summarize th... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Variables | Variables | Task
Demonstrate a language's methods of:
variable declaration
initialization
assignment
datatypes
scope
referencing, and
other variable related facilities
| #Swift | Swift | import Foundation
// All variables declared outside of a struct/class/etc are global
// Swift is a typed language
// Swift can infer the type of variables
var str = "Hello, playground" // String
let letStr:String = "This is a constant"
// However, all variables must be initialized
// Intialize variable of type St... | Give a code snippet in #Swift
Task
Demonstrate a language's methods of:
variable declaration
initialization
assignment
datatypes
scope
referencing, and
other variable related facilities
| christopher/rosetta-code | |
http://rosettacode.org/wiki/Permutations/Derangements | Permutations/Derangements | A derangement is a permutation of the order of distinct items in which no item appears in its original place.
For example, the only two derangements of the three items (0, 1, 2) are (1, 2, 0), and (2, 0, 1).
The number of derangements of n distinct items is known as the subfactorial of n, sometimes written as !n.
The... | #zkl | zkl | fcn subFact(n){
if(n==0) return(1);
if(n==1) return(0);
(n-1)*(self.fcn(n-1) + self.fcn(n-2));
}
fcn derangements(n){
// All deranged permutations of the integers 0..n-1 inclusive
enum:=[0..n-1].pump(List);
Utils.Helpers.permuteW(enum).filter('wrap(perm){
perm.zipWith('==,enum).sum(0) == 0
... | Give a code snippet in #zkl
A derangement is a permutation of the order of distinct items in which no item appears in its original place.
For example, the only two derangements of the three items (0, 1, 2) are (1, 2, 0), and (2, 0, 1).
The number of derangements of n distinct items is known as the subfactorial of n,... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Conditional_structures | Conditional structures | Control Structures
These are examples of control structures. You may also be interested in:
Conditional structures
Exceptions
Flow-control structures
Loops
Task
List the conditional structures offered by a programming language. See Wikipedia: conditionals for descriptions.
Common conditional structures include ... | #Toka | Toka | 100 100 = [ ." True\n" ] ifTrue
100 200 = [ ." True\n" ] ifTrue | Give a code snippet in #Toka
Control Structures
These are examples of control structures. You may also be interested in:
Conditional structures
Exceptions
Flow-control structures
Loops
Task
List the conditional structures offered by a programming language. See Wikipedia: conditionals for descriptions.
Common c... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Casting_out_nines | Casting out nines | Task (in three parts)
Part 1
Write a procedure (say
c
o
9
(
x
)
{\displaystyle {\mathit {co9}}(x)}
) which implements Casting Out Nines as described by returning the checksum for
x
{\displaystyle x}
. Demonstrate the procedure using the examples given there, or others you may consider lucky.
Par... | #J | J | castout=: 1 :0
[: (#~ ] =&((m-1)&|) *:) <. + [: i. (+*)@-~
) | Give a code snippet in #J
Task (in three parts)
Part 1
Write a procedure (say
c
o
9
(
x
)
{\displaystyle {\mathit {co9}}(x)}
) which implements Casting Out Nines as described by returning the checksum for
x
{\displaystyle x}
. Demonstrate the procedure using the examples given there, or others y... | christopher/rosetta-code | |
http://rosettacode.org/wiki/File_size | File size | Verify the size of a file called input.txt for a file in the current working directory, and another one in the file system root.
| #Scala | Scala | import java.io.File
object FileSize extends App {
val name = "pg1661.txt"
println(s"$name : ${new File(name).length()} bytes")
println(s"/$name : ${new File(s"${File.separator}$name").length()} bytes")
} | Give a code snippet in #Scala
Verify the size of a file called input.txt for a file in the current working directory, and another one in the file system root.
| christopher/rosetta-code | |
http://rosettacode.org/wiki/Averages/Pythagorean_means | Averages/Pythagorean means | Task[edit]
Compute all three of the Pythagorean means of the set of integers 1 through 10 (inclusive).
Show that
A
(
x
1
,
…
,
x
n
)
≥
G
(
x
1
,
…
,
x
n
)
≥
H
(
x
1
,
…
,
x
n
)
{\displaystyle A(x_{1},\ldots ,x_{n})\geq G(x_{1},\ldots ,x_{n})\geq H(x_{1},\ldots ,x_{n})}
for this set of p... | #Amazing_Hopper | Amazing Hopper |
#include <hopper.h>
/* An example of definitions in pseudo-natural language, with synonimous.
These definitions can be inside a definition file (xxxx.h) */
#define getasinglelistof(_X_) {_X_},
#synon getasinglelistof getalistof
#define integerrandomnumbers _V1000_=-1,rand array(_V1000_),mulby(10),ce... | Give a code snippet in #Amazing_Hopper
Task[edit]
Compute all three of the Pythagorean means of the set of integers 1 through 10 (inclusive).
Show that
A
(
x
1
,
…
,
x
n
)
≥
G
(
x
1
,
…
,
x
n
)
≥
H
(
x
1
,
…
,
x
n
)
{\displaystyle A(x_{1},\ldots ,x_{n})\geq G(x_{1},\ldots ,x_{n})\geq H(x... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Random_number_generator_(included) | Random number generator (included) | The task is to:
State the type of random number generator algorithm used in a language's built-in random number generator. If the language or its immediate libraries don't provide a random number generator, skip this task.
If possible, give a link to a wider explanation of the algorithm used.
Note: the task is not t... | #Octave | Octave | setrand(3)
random(6)+1
\\ chosen by fair dice roll.
\\ guaranteed to the random. | Give a code snippet in #Octave
The task is to:
State the type of random number generator algorithm used in a language's built-in random number generator. If the language or its immediate libraries don't provide a random number generator, skip this task.
If possible, give a link to a wider explanation of the algorit... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Zero_to_the_zero_power | Zero to the zero power | Some computer programming languages are not exactly consistent (with other computer programming languages)
when raising zero to the zeroth power: 00
Task
Show the results of raising zero to the zeroth power.
If your computer language objects to 0**0 or 0^0 at compile time, ... | #Neko | Neko | /**
Zero to the zeroth power, in Neko
*/
var math_pow = $loader.loadprim("std@math_pow", 2)
$print(math_pow(0, 0), "\n") | Give a code snippet in #Neko
Some computer programming languages are not exactly consistent (with other computer programming languages)
when raising zero to the zeroth power: 00
Task
Show the results of raising zero to the zeroth power.
If your computer language objects to 0**0 or ... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Averages/Simple_moving_average | Averages/Simple moving average | Computing the simple moving average of a series of numbers.
Task[edit]
Create a stateful function/class/instance that takes a period and returns a routine that takes a number as argument and returns a simple moving average of its arguments so far.
Description
A simple moving average is a method for computing an avera... | #Pony | Pony |
class MovingAverage
let period: USize
let _arr: Array[I32] // circular buffer
var _curr: USize // index of pointer position
var _total: I32 // cache the total so far
new create(period': USize) =>
period = period'
_arr = Array[I32](period) // preallocate space
_curr = 0
_total = 0
fu... | Give a code snippet in #Pony
Computing the simple moving average of a series of numbers.
Task[edit]
Create a stateful function/class/instance that takes a period and returns a routine that takes a number as argument and returns a simple moving average of its arguments so far.
Description
A simple moving average is a... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Chinese_zodiac | Chinese zodiac | Traditionally, the Chinese have counted years using two simultaneous cycles, one of length 10 (the "celestial stems") and one of length 12 (the "terrestrial branches"); the combination results in a repeating 60-year pattern. Mapping the branches to twelve traditional animal deities results in the well-known "Chinese zo... | #11l | 11l | V animals = [‘Rat’, ‘Ox’, ‘Tiger’, ‘Rabbit’, ‘Dragon’, ‘Snake’, ‘Horse’, ‘Goat’, ‘Monkey’, ‘Rooster’, ‘Dog’, ‘Pig’]
V elements = [‘Wood’, ‘Fire’, ‘Earth’, ‘Metal’, ‘Water’]
F getElement(year)
R :elements[(year - 4) % 10 I/ 2]
F getAnimal(year)
R :animals[(year - 4) % 12]
F getYY(year)
I year % 2 == 0
... | Give a code snippet in #11l
Traditionally, the Chinese have counted years using two simultaneous cycles, one of length 10 (the "celestial stems") and one of length 12 (the "terrestrial branches"); the combination results in a repeating 60-year pattern. Mapping the branches to twelve traditional animal deities results ... | christopher/rosetta-code | |
http://rosettacode.org/wiki/String_case | String case | Task
Take the string alphaBETA and demonstrate how to convert it to:
upper-case and
lower-case
Use the default encoding of a string literal or plain ASCII if there is no string literal in your language.
Note: In some languages alphabets toLower and toUpper is not reversable.
Show any additional... | #Plain_English | Plain English | To run:
Start up.
Put "alphaBeta" into a string.
Uppercase the string.
Write the string to the console.
Lowercase the string.
Write the string to the console.
Capitalize the string.
Write the string to the console.
Wait for the escape key.
Shut down. | Give a code snippet in #Plain_English
Task
Take the string alphaBETA and demonstrate how to convert it to:
upper-case and
lower-case
Use the default encoding of a string literal or plain ASCII if there is no string literal in your language.
Note: In some languages alphabets toLower and toUpper ... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Balanced_ternary | Balanced ternary | Balanced ternary is a way of representing numbers. Unlike the prevailing binary representation, a balanced ternary integer is in base 3, and each digit can have the values 1, 0, or −1.
Examples
Decimal 11 = 32 + 31 − 30, thus it can be written as "++−"
Decimal 6 = 32 − 31 + 0 × 30, thus it can be written as "+−0"
... | #ALGOL_68 | ALGOL 68 | -- Build a balanced ternary, as text, from an integer value or acceptable AppleScript substitute.
on BTFromInteger(n)
try
if (n mod 1 is not 0) then error (n as text) & " isn't an integer value"
set n to n as integer
on error errMsg
display alert "BTFromInteger handler: parameter error" ... | Give a code snippet in #ALGOL_68
Balanced ternary is a way of representing numbers. Unlike the prevailing binary representation, a balanced ternary integer is in base 3, and each digit can have the values 1, 0, or −1.
Examples
Decimal 11 = 32 + 31 − 30, thus it can be written as "++−"
Decimal 6 = 32 − 31 + 0 × 30... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Function_definition | Function definition | A function is a body of code that returns a value.
The value returned may depend on arguments provided to the function.
Task
Write a definition of a function called "multiply" that takes two arguments and returns their product.
(Argument types should be chosen so as not to distract from showing how functions are ... | #Axe | Axe | Lbl MULT
r₁*r₂
Return | Give a code snippet in #Axe
A function is a body of code that returns a value.
The value returned may depend on arguments provided to the function.
Task
Write a definition of a function called "multiply" that takes two arguments and returns their product.
(Argument types should be chosen so as not to distract fr... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Topic_variable | Topic variable | Several programming languages offer syntax shortcuts to deal with the notion of "current" or "topic" variable.
A topic variable is a special variable with a very short name which can also often be omitted.
Demonstrate the utilization and behaviour of the topic variable within the language and explain or demonstrate h... | #Axe | Axe | 3
Disp *3▶Dec,i | Give a code snippet in #Axe
Several programming languages offer syntax shortcuts to deal with the notion of "current" or "topic" variable.
A topic variable is a special variable with a very short name which can also often be omitted.
Demonstrate the utilization and behaviour of the topic variable within the language... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Gamma_function | Gamma function | Task
Implement one algorithm (or more) to compute the Gamma (
Γ
{\displaystyle \Gamma }
) function (in the real field only).
If your language has the function as built-in or you know a library which has it, compare your implementation's results with the results of the built-in/library function.
The Gamma funct... | #Go | Go | package main
import (
"fmt"
"math"
)
func main() {
fmt.Println(" x math.Gamma Lanczos7")
for _, x := range []float64{-.5, .1, .5, 1, 1.5, 2, 3, 10, 140, 170} {
fmt.Printf("%5.1f %24.16g %24.16g\n", x, math.Gamma(x), lanczos7(x))
}
}
func lanczos7(z floa... | Give a code snippet in #Go
Task
Implement one algorithm (or more) to compute the Gamma (
Γ
{\displaystyle \Gamma }
) function (in the real field only).
If your language has the function as built-in or you know a library which has it, compare your implementation's results with the results of the built-in/librar... | christopher/rosetta-code | |
http://rosettacode.org/wiki/99_bottles_of_beer | 99 bottles of beer | Task
Display the complete lyrics for the song: 99 Bottles of Beer on the Wall.
The beer song
The lyrics follow this form:
99 bottles of beer on the wall
99 bottles of beer
Take one down, pass it around
98 bottles of beer on the wall
98 bottles of beer on the wall
98 bottles of beer
Take one dow... | #C | C | /*
* 99 Bottles, C, KISS (i.e. keep it simple and straightforward) version
*/
#include <stdio.h>
int main(void)
{
int n;
for( n = 99; n > 2; n-- )
printf(
"%d bottles of beer on the wall, %d bottles of beer.\n"
"Take one down and pass it around, %d bottles of beer on the wall.\n\n",
... | Give a code snippet in #C
Task
Display the complete lyrics for the song: 99 Bottles of Beer on the Wall.
The beer song
The lyrics follow this form:
99 bottles of beer on the wall
99 bottles of beer
Take one down, pass it around
98 bottles of beer on the wall
98 bottles of beer on the wall
98 bot... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Circular_primes | Circular primes | Definitions
A circular prime is a prime number with the property that the number generated at each intermediate step when cyclically permuting its (base 10) digits will also be prime.
For example:
1193 is a circular prime, since 1931, 9311 and 3119 are all also prime.
Note that a number which is a cyclic permutation ... | #Go | Go | package main
import (
"fmt"
big "github.com/ncw/gmp"
"strings"
)
// OK for 'small' numbers.
func isPrime(n int) bool {
switch {
case n < 2:
return false
case n%2 == 0:
return n == 2
case n%3 == 0:
return n == 3
default:
d := 5
for d*d <= n {
... | Give a code snippet in #Go
Definitions
A circular prime is a prime number with the property that the number generated at each intermediate step when cyclically permuting its (base 10) digits will also be prime.
For example:
1193 is a circular prime, since 1931, 9311 and 3119 are all also prime.
Note that a number wh... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Multiple_regression | Multiple regression | Task
Given a set of data vectors in the following format:
y
=
{
y
1
,
y
2
,
.
.
.
,
... | #Ruby | Ruby | require 'matrix'
def regression_coefficients y, x
y = Matrix.column_vector y.map { |i| i.to_f }
x = Matrix.columns x.map { |xi| xi.map { |i| i.to_f }}
(x.t * x).inverse * x.t * y
end | Give a code snippet in #Ruby
Task
Given a set of data vectors in the following format:
y
=
{
y
1
,
y
2
,
.
.
.... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Image_convolution | Image convolution | One class of image digital filters is described by a rectangular matrix of real coefficients called kernel convoluted in a sliding window of image pixels. Usually the kernel is square
K
k
l
{\displaystyle K_{kl}}
, where k, l are in the range -R,-R+1,..,R-1,R. W=2R+1 is the kernel width. The filter determine... | #Maple | Maple | pic:=Import("smiling_dog.jpg"):
mask := Matrix([[1,2,3],[4,5,6],[7,8,9]]);
pic := ImageTools:-Convolution(pic, mask); | Give a code snippet in #Maple
One class of image digital filters is described by a rectangular matrix of real coefficients called kernel convoluted in a sliding window of image pixels. Usually the kernel is square
K
k
l
{\displaystyle K_{kl}}
, where k, l are in the range -R,-R+1,..,R-1,R. W=2R+1 is the ker... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Display_an_outline_as_a_nested_table | Display an outline as a nested table |
Display an outline as a nested table.
Parse the outline to a tree,
count the leaves descending from each node,
and write out a table with 'colspan' values
measuring the indent of each line,
translating the indentation to a nested structure,
and padding the tree to even depth.
defining the width of a ... | #Nim | Nim | import strutils
const Outline = """Display an outline as a nested table.
Parse the outline to a tree,
measuring the indent of each line,
translating the indentation to a nested structure,
and padding the tree to even depth.
count the leaves descending from each node,
defining t... | Give a code snippet in #Nim
Display an outline as a nested table.
Parse the outline to a tree,
count the leaves descending from each node,
and write out a table with 'colspan' values
measuring the indent of each line,
translating the indentation to a nested structure,
and padding the tree to even dept... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Strip_whitespace_from_a_string/Top_and_tail | Strip whitespace from a string/Top and tail | Task
Demonstrate how to strip leading and trailing whitespace from a string.
The solution should demonstrate how to achieve the following three results:
String with leading whitespace removed
String with trailing whitespace removed
String with both leading and trailing whitespace removed
For the purposes of thi... | #XPL0 | XPL0 | code ChOut=8, CrLf=9, Text=12;
string 0; \use zero-terminated string convention
func StripLead(S0); \Strip leading whitespace (<=$20) from string
char S0;
char S1(80); \BEWARE: very temporary string space returned
int I, J, C, Stripped;
[I:= 0; J:= 0; Stripped:=... | Give a code snippet in #XPL0
Task
Demonstrate how to strip leading and trailing whitespace from a string.
The solution should demonstrate how to achieve the following three results:
String with leading whitespace removed
String with trailing whitespace removed
String with both leading and trailing whitespace rem... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Function_prototype | Function prototype | Some languages provide the facility to declare functions and subroutines through the use of function prototyping.
Task
Demonstrate the methods available for declaring prototypes within the language. The provided solutions should include:
An explanation of any placement restrictions for prototype declarations
A p... | #Oforth | Oforth | Method new: myMethod | Give a code snippet in #Oforth
Some languages provide the facility to declare functions and subroutines through the use of function prototyping.
Task
Demonstrate the methods available for declaring prototypes within the language. The provided solutions should include:
An explanation of any placement restrictions... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Arena_storage_pool | Arena storage pool | Dynamically allocated objects take their memory from a heap.
The memory for an object is provided by an allocator which maintains the storage pool used for the heap.
Often a call to allocator is denoted as
P := new T
where T is the type of an allocated object, and P is a reference to the object.
The stora... | #Wren | Wren | var arena = List.filled(5, 0) // allocate memory for 5 integers
for (i in 0..4) arena[i] = i // insert some integers
System.print(arena) // print them
arena = null // make arena eligible for garbage collection
System.gc() // request immediate garbage collection | Give a code snippet in #Wren
Dynamically allocated objects take their memory from a heap.
The memory for an object is provided by an allocator which maintains the storage pool used for the heap.
Often a call to allocator is denoted as
P := new T
where T is the type of an allocated object, and P is a refer... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Joystick_position | Joystick position | The task is to determine the joystick position and represent this on the display via a crosshair.
For a centred joystick, the crosshair should appear in the centre of the screen.
If the joystick is pushed left or right, then the cross hair should move left or right according to the extent that the joystick is pushed.
... | #Locomotive_Basic | Locomotive Basic | 10 MODE 1:BORDER 14:x=320:y=200:d=1
20 a=JOY(0) ' read state of first joystick
30 IF d THEN q$="*" ELSE q$=" "
40 IF a THEN MOVE x-8,y+8:TAG:PRINT q$;:TAGOFF
50 IF (a AND 1) AND y<380 THEN y=y+10
60 IF (a AND 2) AND y>20 THEN y=y-10
70 IF (a AND 4) AND x>20 THEN x=x-10
80 IF (a AND 8) AND x<620 THEN x=x+10
90 IF a A... | Give a code snippet in #Locomotive_Basic
The task is to determine the joystick position and represent this on the display via a crosshair.
For a centred joystick, the crosshair should appear in the centre of the screen.
If the joystick is pushed left or right, then the cross hair should move left or right according to... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Pascal%27s_triangle/Puzzle | Pascal's triangle/Puzzle | This puzzle involves a Pascals Triangle, also known as a Pyramid of Numbers.
[ 151]
[ ][ ]
[40][ ][ ]
[ ][ ][ ][ ]
[ X][11][ Y][ 4][ Z]
Each brick of the pyramid is the sum of the two bricks situated below it.
Of the three missing numbers at the base of the pyramid,
the... | #Oz | Oz | %% to compile : ozc -x <file.oz>
functor
import
System Application FD Search
define
proc{Quest Root Rules}
proc{Limit Rc Ls}
case Ls of nil then skip
[] X|Xs then
{Limit Rc Xs}
case X of N#V then
Rc.N =: V
[] N1#N2#N3 then
Rc.N1 =: Rc.N2 + R... | Give a code snippet in #Oz
This puzzle involves a Pascals Triangle, also known as a Pyramid of Numbers.
[ 151]
[ ][ ]
[40][ ][ ]
[ ][ ][ ][ ]
[ X][11][ Y][ 4][ Z]
Each brick of the pyramid is the sum of the two bricks situated below it.
Of the three missing numbers at ... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Increment_a_numerical_string | Increment a numerical string | Task
Increment a numerical string.
| #Scala | Scala | implicit def toSucc(s: String) = new { def succ = BigDecimal(s) + 1 toString } | Give a code snippet in #Scala
Task
Increment a numerical string.
| christopher/rosetta-code | |
http://rosettacode.org/wiki/Execute_Brain**** | Execute Brain**** | Execute Brain**** is an implementation of Brainf***.
Other implementations of Brainf***.
RCBF is a set of Brainf*** compilers and interpreters written for Rosetta Code in a variety of languages.
Below are links to each of the versions of RCBF.
An implementation need only properly implement the following instructions:... | #Potion | Potion | # Where `code` is a string.
bf = (code) :
tape = (0)
tape_pos = 0
brackets = ()
i = -1
while (++i < code length) :
if (code(i) == ">"): if (++tape_pos == tape length): tape append(0)..
elsif (code(i) == "<"): tape_pos--.
elsif (code(i) == "+"): tape(tape_pos) = tape(tape_pos) + 1.
... | Give a code snippet in #Potion
Execute Brain**** is an implementation of Brainf***.
Other implementations of Brainf***.
RCBF is a set of Brainf*** compilers and interpreters written for Rosetta Code in a variety of languages.
Below are links to each of the versions of RCBF.
An implementation need only properly imple... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Sorting_algorithms/Insertion_sort | Sorting algorithms/Insertion sort |
Sorting Algorithm
This is a sorting algorithm. It may be applied to a set of data in order to sort it.
For comparing various sorts, see compare sorts.
For other sorting algorithms, see sorting algorithms, or:
O(n logn) sorts
Heap sort |
Merge sort |
Patience sort |
Quick sort
O(n log2n) sorts
Shell Sort
... | #Groovy | Groovy | def insertionSort = { list ->
def size = list.size()
(1..<size).each { i ->
def value = list[i]
def j = i - 1
for (; j >= 0 && list[j] > value; j--) {
print "."; list[j+1] = list[j]
}
print "."; list[j+1] = value
}
list
} | Give a code snippet in #Groovy
Sorting Algorithm
This is a sorting algorithm. It may be applied to a set of data in order to sort it.
For comparing various sorts, see compare sorts.
For other sorting algorithms, see sorting algorithms, or:
O(n logn) sorts
Heap sort |
Merge sort |
Patience sort |
Quick s... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Empty_program | Empty program | Task
Create the simplest possible program that is still considered "correct."
| #Befunge | Befunge | @
| Give a code snippet in #Befunge
Task
Create the simplest possible program that is still considered "correct."
| christopher/rosetta-code | |
http://rosettacode.org/wiki/Case-sensitivity_of_identifiers | Case-sensitivity of identifiers | Three dogs (Are there three dogs or one dog?) is a code snippet used to illustrate the lettercase sensitivity of the programming language. For a case-sensitive language, the identifiers dog, Dog and DOG are all different and we should get the output:
The three dogs are named Benjamin, Samba and Bernie.
For a language... | #ALGOL_W | ALGOL W | begin
string(8) dog;
dog := "Benjamin";
begin
string(8) Dog;
Dog := "Samba";
begin
string(8) DOG;
DOG := "Bernie";
if DOG not = Dog
or DOG not = dog
then write( "The three dogs are named: ", dog, ", ", Dog, " and ", DOG )
... | Give a code snippet in #ALGOL_W
Three dogs (Are there three dogs or one dog?) is a code snippet used to illustrate the lettercase sensitivity of the programming language. For a case-sensitive language, the identifiers dog, Dog and DOG are all different and we should get the output:
The three dogs are named Benjamin, ... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Sorting_algorithms/Insertion_sort | Sorting algorithms/Insertion sort |
Sorting Algorithm
This is a sorting algorithm. It may be applied to a set of data in order to sort it.
For comparing various sorts, see compare sorts.
For other sorting algorithms, see sorting algorithms, or:
O(n logn) sorts
Heap sort |
Merge sort |
Patience sort |
Quick sort
O(n log2n) sorts
Shell Sort
... | #Kotlin | Kotlin | fun insertionSort(array: IntArray) {
for (index in 1 until array.size) {
val value = array[index]
var subIndex = index - 1
while (subIndex >= 0 && array[subIndex] > value) {
array[subIndex + 1] = array[subIndex]
subIndex--
}
array[subIndex + 1] = value... | Give a code snippet in #Kotlin
Sorting Algorithm
This is a sorting algorithm. It may be applied to a set of data in order to sort it.
For comparing various sorts, see compare sorts.
For other sorting algorithms, see sorting algorithms, or:
O(n logn) sorts
Heap sort |
Merge sort |
Patience sort |
Quick s... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Y_combinator | Y combinator | In strict functional programming and the lambda calculus, functions (lambda expressions) don't have state and are only allowed to refer to arguments of enclosing functions.
This rules out the usual definition of a recursive function wherein a function is associated with the state of a variable and this variable's stat... | #Phixmonti | Phixmonti | 0 var subr
def fac
dup 1 > if
dup 1 - subr exec *
endif
enddef
def fib
dup 1 > if
dup 1 - subr exec swap 2 - subr exec +
endif
enddef
def test
print ": " print
var subr
10 for
subr exec print " " print
endfor
nl
enddef
getid fac "fac" test
getid fib "f... | Give a code snippet in #Phixmonti
In strict functional programming and the lambda calculus, functions (lambda expressions) don't have state and are only allowed to refer to arguments of enclosing functions.
This rules out the usual definition of a recursive function wherein a function is associated with the state of ... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Command-line_arguments | Command-line arguments | Command-line arguments is part of Short Circuit's Console Program Basics selection.
Scripted main
See also Program name.
For parsing command line arguments intelligently, see Parsing command-line arguments.
Example command line:
myprogram -c "alpha beta" -h "gamma"
| #S-lang | S-lang | variable a;
foreach a (__argv)
print(a);
| Give a code snippet in #S-lang
Command-line arguments is part of Short Circuit's Console Program Basics selection.
Scripted main
See also Program name.
For parsing command line arguments intelligently, see Parsing command-line arguments.
Example command line:
myprogram -c "alpha beta" -h "gamma"
| christopher/rosetta-code | |
http://rosettacode.org/wiki/Towers_of_Hanoi | Towers of Hanoi | Task
Solve the Towers of Hanoi problem with recursion.
| #FreeBASIC | FreeBASIC | ' FB 1.05.0 Win64
Sub move(n As Integer, from As Integer, to_ As Integer, via As Integer)
If n > 0 Then
move(n - 1, from, via, to_)
Print "Move disk"; n; " from pole"; from; " to pole"; to_
move(n - 1, via, to_, from)
End If
End Sub
Print "Three disks" : Print
move 3, 1, 2, 3
Print
Print "Four dis... | Give a code snippet in #FreeBASIC
Task
Solve the Towers of Hanoi problem with recursion.
| christopher/rosetta-code | |
http://rosettacode.org/wiki/Totient_function | Totient function | The totient function is also known as:
Euler's totient function
Euler's phi totient function
phi totient function
Φ function (uppercase Greek phi)
φ function (lowercase Greek phi)
Definitions (as per number theory)
The totient function:
counts the integers up to a given positiv... | #Phix | Phix | function totient(integer n)
integer tot = n, i = 2
while i*i<=n do
if mod(n,i)=0 then
while true do
n /= i
if mod(n,i)!=0 then exit end if
end while
tot -= tot/i
end if
i += iff(i=2?1:2)
end while
if n>1 then
... | Give a code snippet in #Phix
The totient function is also known as:
Euler's totient function
Euler's phi totient function
phi totient function
Φ function (uppercase Greek phi)
φ function (lowercase Greek phi)
Definitions (as per number theory)
The totient function:
counts the ... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Terminal_control/Clear_the_screen | Terminal control/Clear the screen | Task
Clear the terminal window.
| #Tcl | Tcl | puts -nonewline "\033\[2J"
flush stdout | Give a code snippet in #Tcl
Task
Clear the terminal window.
| christopher/rosetta-code | |
http://rosettacode.org/wiki/Pascal%27s_triangle/Puzzle | Pascal's triangle/Puzzle | This puzzle involves a Pascals Triangle, also known as a Pyramid of Numbers.
[ 151]
[ ][ ]
[40][ ][ ]
[ ][ ][ ][ ]
[ X][11][ Y][ 4][ Z]
Each brick of the pyramid is the sum of the two bricks situated below it.
Of the three missing numbers at the base of the pyramid,
the... | #C | C |
/* Pascal's pyramid solver
*
* [top]
* [ ] [ ]
* [mid] [ ] [ ]
* [ ] [ ] [ ] [ ]
* [ x ] [ a ] [ y ] [ b ] [ z ]
* x + z = y
*
* This solution makes use of a little bit of mathematical observation,
* such as the fact that top = 4(a+b) + 7(... | Give a code snippet in #C
This puzzle involves a Pascals Triangle, also known as a Pyramid of Numbers.
[ 151]
[ ][ ]
[40][ ][ ]
[ ][ ][ ][ ]
[ X][11][ Y][ 4][ Z]
Each brick of the pyramid is the sum of the two bricks situated below it.
Of the three missing numbers at t... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Create_a_file | Create a file | In this task, the job is to create a new empty file called "output.txt" of size 0 bytes
and an empty directory called "docs". This should be done twice: once "here", i.e. in the current working directory and once in the filesystem root.
| #OCaml | OCaml | # let oc = open_out "output.txt" in
close_out oc;;
- : unit = ()
# Unix.mkdir "docs" 0o750 ;; (* rights 0o750 for rwxr-x--- *)
- : unit = () | Give a code snippet in #OCaml
In this task, the job is to create a new empty file called "output.txt" of size 0 bytes
and an empty directory called "docs". This should be done twice: once "here", i.e. in the current working directory and once in the filesystem root.
| christopher/rosetta-code | |
http://rosettacode.org/wiki/Primality_by_trial_division | Primality by trial division | Task
Write a boolean function that tells whether a given integer is prime.
Remember that 1 and all non-positive numbers are not prime.
Use trial division.
Even numbers greater than 2 may be eliminated right away.
A loop from 3 to √ n will suffice, but other loops are allowed.
Related tasks
... | #Scheme | Scheme | (define (prime? number)
(define (*prime? divisor)
(or (> (* divisor divisor) number)
(and (> (modulo number divisor) 0)
(*prime? (+ divisor 1)))))
(and (> number 1)
(*prime? 2))) | Give a code snippet in #Scheme
Task
Write a boolean function that tells whether a given integer is prime.
Remember that 1 and all non-positive numbers are not prime.
Use trial division.
Even numbers greater than 2 may be eliminated right away.
A loop from 3 to √ n will suffice, but other loop... | christopher/rosetta-code | |
http://rosettacode.org/wiki/HTTPS | HTTPS | Task
Send a GET request to obtain the resource located at the URL "https://www.w3.org/", then print it to the console.
Checking the host certificate for validity is recommended.
Do not authenticate. That is the subject of other tasks.
Readers may wish to contrast with the HTTP Request task, and also the task on HTT... | #Nemerle | Nemerle | using System;
using System.Console;
using System.Net;
using System.IO;
module HTTP
{
Main() : void
{
def wc = WebClient();
def myStream = wc.OpenRead(https://sourceforge.com);
def sr = StreamReader(myStream);
WriteLine(sr.ReadToEnd());
myStream.Close()
}
} | Give a code snippet in #Nemerle
Task
Send a GET request to obtain the resource located at the URL "https://www.w3.org/", then print it to the console.
Checking the host certificate for validity is recommended.
Do not authenticate. That is the subject of other tasks.
Readers may wish to contrast with the HTTP Reque... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Read_entire_file | Read entire file | Task
Load the entire contents of some text file as a single string variable.
If applicable, discuss: encoding selection, the possibility of memory-mapping.
Of course, in practice one should avoid reading an entire file at once
if the file is large and the task can be accomplished incrementally instead
(in which case... | #Q | Q | q)file:read0`:file.txt
"First line of file"
"Second line of file"
"" | Give a code snippet in #Q
Task
Load the entire contents of some text file as a single string variable.
If applicable, discuss: encoding selection, the possibility of memory-mapping.
Of course, in practice one should avoid reading an entire file at once
if the file is large and the task can be accomplished increment... | christopher/rosetta-code | |
http://rosettacode.org/wiki/The_Name_Game | The Name Game | Write a program that accepts a name as input and outputs the lyrics to the Shirley Ellis song "The Name Game".
The regular verse
Unless your name begins with a vowel (A, E, I, O, U), 'B', 'F' or 'M' you don't have to care about special rules.
The verse for the name 'Gary' would be like this:
Gary, Gary, bo-bary... | #Ruby | Ruby | #!/usr/bin/env ruby
def print_verse(name)
first_letter_and_consonants_re = /^.[^aeiyou]*/i
full_name = name.capitalize # X
suffixed = case full_name[0] # Y
when 'A','E','I','O','U'
name.downcase
else
full_name.sub(first_letter_and_consonants_re, '')... | Give a code snippet in #Ruby
Write a program that accepts a name as input and outputs the lyrics to the Shirley Ellis song "The Name Game".
The regular verse
Unless your name begins with a vowel (A, E, I, O, U), 'B', 'F' or 'M' you don't have to care about special rules.
The verse for the name 'Gary' would be like... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Sorting_algorithms/Bogosort | Sorting algorithms/Bogosort |
Sorting Algorithm
This is a sorting algorithm. It may be applied to a set of data in order to sort it.
For comparing various sorts, see compare sorts.
For other sorting algorithms, see sorting algorithms, or:
O(n logn) sorts
Heap sort |
Merge sort |
Patience sort |
Quick sort
O(n log2n) sorts
Shell Sort
... | #zkl | zkl | fcn increasing(list){
list.len()<2 or
list.reduce(fcn(a,b){ if(b<a) return(Void.Stop,False); b }).toBool()
}
ns:=L(5,23,1,6,123,7,23);
while(not increasing(ns)){ ns=ns.shuffle() }
ns.println(); | Give a code snippet in #zkl
Sorting Algorithm
This is a sorting algorithm. It may be applied to a set of data in order to sort it.
For comparing various sorts, see compare sorts.
For other sorting algorithms, see sorting algorithms, or:
O(n logn) sorts
Heap sort |
Merge sort |
Patience sort |
Quick sort... | christopher/rosetta-code | |
http://rosettacode.org/wiki/I_before_E_except_after_C | I before E except after C | The phrase "I before E, except after C" is a
widely known mnemonic which is supposed to help when spelling English words.
Task
Using the word list from http://wiki.puzzlers.org/pub/wordlists/unixdict.txt,
check if the two sub-clauses of the phrase are plausible individually:
"I before E when not pre... | #Lua | Lua | -- Needed to get dictionary file from web server
local http = require("socket.http")
-- Return count of words that contain pattern
function count (pattern, wordList)
local total = 0
for word in wordList:gmatch("%S+") do
if word:match(pattern) then total = total + 1 end
end
return total
end
-... | Give a code snippet in #Lua
The phrase "I before E, except after C" is a
widely known mnemonic which is supposed to help when spelling English words.
Task
Using the word list from http://wiki.puzzlers.org/pub/wordlists/unixdict.txt,
check if the two sub-clauses of the phrase are plausible individually:... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Xiaolin_Wu%27s_line_algorithm | Xiaolin Wu's line algorithm | Task
Implement the Xiaolin Wu's line algorithm described in Wikipedia.
This algorithm draws anti-aliased lines.
Related task
See Bresenham's line algorithm for aliased lines.
| #Mathematica.2FWolfram_Language | Mathematica/Wolfram Language | ClearAll[ReverseFractionalPart, ReplacePixelWithAlpha, DrawEndPoint, DrawLine]
ReverseFractionalPart[x_] := 1 - FractionalPart[x]
ReplacePixelWithAlpha[img_Image, pos_ -> colvals : {_, _, _},
alpha_] := Module[{vals,},
vals = PixelValue[img, pos];
vals = (1 - alpha) vals + alpha colvals;
ReplacePixelValue[img,... | Give a code snippet in #Mathematica.2FWolfram_Language
Task
Implement the Xiaolin Wu's line algorithm described in Wikipedia.
This algorithm draws anti-aliased lines.
Related task
See Bresenham's line algorithm for aliased lines.
| christopher/rosetta-code | |
http://rosettacode.org/wiki/S-expressions | S-expressions | S-Expressions are one convenient way to parse and store data.
Task
Write a simple reader and writer for S-Expressions that handles quoted and unquoted strings, integers and floats.
The reader should read a single but nested S-Expression from a string and store it in a suitable datastructure (list, array, etc).
... | #Ada | Ada | with Ada.Strings.Unbounded;
private with Ada.Containers.Indefinite_Vectors;
generic
with procedure Print_Line(Indention: Natural; Line: String);
package S_Expr is
function "-"(S: String) return Ada.Strings.Unbounded.Unbounded_String
renames Ada.Strings.Unbounded.To_Unbounded_String;
function "+"(U: ... | Give a code snippet in #Ada
S-Expressions are one convenient way to parse and store data.
Task
Write a simple reader and writer for S-Expressions that handles quoted and unquoted strings, integers and floats.
The reader should read a single but nested S-Expression from a string and store it in a suitable datast... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Search_a_list_of_records | Search a list of records | Many programming languages provide convenient ways to look for a known value in a simple list of strings or numbers.
But what if the elements of the list are themselves compound records/objects/data-structures, and the search condition is more complex than a simple equality test?
Task[edit]
Write a function/method/et... | #REXX | REXX | /*REXX program (when using criteria) locates values (indices) from an associate array. */
$="Lagos=21, Cairo=15.2, Kinshasa-Brazzaville=11.3, Greater Johannesburg=7.55, Mogadishu=5.85,",
"Khartoum-Omdurman=4.98, Dar Es Salaam=4.7, Alexandria=4.58, Abidjan=4.4, Casablanca=3.98"
@.= '(city not found)'; city.=... | Give a code snippet in #REXX
Many programming languages provide convenient ways to look for a known value in a simple list of strings or numbers.
But what if the elements of the list are themselves compound records/objects/data-structures, and the search condition is more complex than a simple equality test?
Task[ed... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Penney%27s_game | Penney's game | Penney's game is a game where two players bet on being the first to see a particular sequence of heads or tails in consecutive tosses of a fair coin.
It is common to agree on a sequence length of three then one player will openly choose a sequence, for example:
Heads, Tails, Heads, or HTH for short.
The other pla... | #Kotlin | Kotlin | // version 1.2.10
import java.util.Random
val rand = Random()
val optimum = mapOf(
"HHH" to "THH", "HHT" to "THH", "HTH" to "HHT", "HTT" to "HHT",
"THH" to "TTH", "THT" to "TTH", "TTH" to "HTT", "TTT" to "HTT"
)
fun getUserSequence(): String {
println("A sequence of three H or T should be entered")
... | Give a code snippet in #Kotlin
Penney's game is a game where two players bet on being the first to see a particular sequence of heads or tails in consecutive tosses of a fair coin.
It is common to agree on a sequence length of three then one player will openly choose a sequence, for example:
Heads, Tails, Heads, ... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Sum_and_product_puzzle | Sum and product puzzle | Task[edit]
Solve the "Impossible Puzzle":
X and Y are two different whole numbers greater than 1. Their sum is no greater than 100, and Y is greater than X. S and P are two mathematicians (and consequently perfect logicians); S knows the sum X+Y and P knows the product X*Y. Both S and P know all the information in th... | #Wren | Wren | import "/dynamic" for Tuple
import "/seq" for Lst
var P = Tuple.create("P", ["x", "y", "sum", "prod"])
var intersect = Fn.new { |l1, l2|
var l3 = (l1.count < l2.count) ? l1 : l2
var l4 = (l3 == l1) ? l2 : l1
var l5 = []
for (e in l3) if (l4.contains(e)) l5.add(e)
return l5
}
var candidates = [... | Give a code snippet in #Wren
Task[edit]
Solve the "Impossible Puzzle":
X and Y are two different whole numbers greater than 1. Their sum is no greater than 100, and Y is greater than X. S and P are two mathematicians (and consequently perfect logicians); S knows the sum X+Y and P knows the product X*Y. Both S and P ... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Additive_primes | Additive primes | Definitions
In mathematics, additive primes are prime numbers for which the sum of their decimal digits are also primes.
Task
Write a program to determine (and show here) all additive primes less than 500.
Optionally, show the number of additive primes.
Also see
the OEIS entry: A046704 additive primes.
... | #Pari.2FGP | Pari/GP | hasPrimeDigitsum(n)=isprime(sumdigits(n)); \\ see A028834 in the OEIS
v1 = select(isprime, select(hasPrimeDigitsum, [1..499]));
v2 = select(hasPrimeDigitsum, select(isprime, [1..499]));
v3 = select(hasPrimeDigitsum, primes([1, 499]));
s=0; forprime(p=2,499, if(hasPrimeDigitsum(p), s++)); s;
[#v1, #v2, #v3, s] | Give a code snippet in #Pari.2FGP
Definitions
In mathematics, additive primes are prime numbers for which the sum of their decimal digits are also primes.
Task
Write a program to determine (and show here) all additive primes less than 500.
Optionally, show the number of additive primes.
Also see
the OEIS en... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Boolean_values | Boolean values | Task
Show how to represent the boolean states "true" and "false" in a language.
If other objects represent "true" or "false" in conditionals, note it.
Related tasks
Logical operations
| #Tcl | Tcl | % if {""} then {puts true} else {puts false}
expected boolean value but got "" | Give a code snippet in #Tcl
Task
Show how to represent the boolean states "true" and "false" in a language.
If other objects represent "true" or "false" in conditionals, note it.
Related tasks
Logical operations
| christopher/rosetta-code | |
http://rosettacode.org/wiki/Terminal_control/Cursor_positioning | Terminal control/Cursor positioning |
Task
Move the cursor to column 3, row 6, and display the word "Hello" (without the quotes), so that the letter H is in column 3 on row 6.
| #Befunge | Befunge | 0"olleHH3;6["39*>:#,_$@ | Give a code snippet in #Befunge
Task
Move the cursor to column 3, row 6, and display the word "Hello" (without the quotes), so that the letter H is in column 3 on row 6.
| christopher/rosetta-code | |
http://rosettacode.org/wiki/Set | Set |
Data Structure
This illustrates a data structure, a means of storing data within a program.
You may see other such structures in the Data Structures category.
A set is a collection of elements, without duplicates and without order.
Task
Show each of these set operations:
Set creation
Test m ∈ S -- "m is an... | #Ceylon | Ceylon | shared void run() {
value a = set {1, 2, 3};
value b = set {3, 4, 5};
value union = a | b;
value intersection = a & b;
value difference = a ~ b;
value subset = a.subset(b);
value equality = a == b;
print("set a: ``a``
set b: ``b``
1 in a? ``... | Give a code snippet in #Ceylon
Data Structure
This illustrates a data structure, a means of storing data within a program.
You may see other such structures in the Data Structures category.
A set is a collection of elements, without duplicates and without order.
Task
Show each of these set operations:
Set ... | christopher/rosetta-code | |
http://rosettacode.org/wiki/XML/Input | XML/Input | Given the following XML fragment, extract the list of student names using whatever means desired. If the only viable method is to use XPath, refer the reader to the task XML and XPath.
<Students>
<Student Name="April" Gender="F" DateOfBirth="1989-01-02" />
<Student Name="Bob" Gender="M" DateOfBirth="1990-03-04" /... | #ARM_Assembly | ARM Assembly |
/* ARM assembly Raspberry PI */
/* program inputXml.s */
/* Constantes */
.equ STDOUT, 1 @ Linux output console
.equ EXIT, 1 @ Linux syscall
.equ WRITE, 4 @ Linux syscall
.equ XML_ELEMENT_NODE, 1
.equ XML_ATTRIBUTE_NODE, 2
.equ XML_TEXT_NODE, 3
.equ XML_CDATA_SEC... | Give a code snippet in #ARM_Assembly
Given the following XML fragment, extract the list of student names using whatever means desired. If the only viable method is to use XPath, refer the reader to the task XML and XPath.
<Students>
<Student Name="April" Gender="F" DateOfBirth="1989-01-02" />
<Student Name="Bob" ... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Parsing/RPN_calculator_algorithm | Parsing/RPN calculator algorithm | Task
Create a stack-based evaluator for an expression in reverse Polish notation (RPN) that also shows the changes in the stack as each individual token is processed as a table.
Assume an input of a correct, space separated, string of tokens of an RPN expression
Test with the RPN expression generated from the... | #Icon_and_Unicon | Icon and Unicon | procedure main()
EvalRPN("3 4 2 * 1 5 - 2 3 ^ ^ / +")
end
link printf
invocable all
procedure EvalRPN(expr) #: evaluate (and trace stack) an RPN string
stack := []
expr ? until pos(0) do {
tab(many(' ')) # consume previous seperator
token := tab(upto(' ')|0)... | Give a code snippet in #Icon_and_Unicon
Task
Create a stack-based evaluator for an expression in reverse Polish notation (RPN) that also shows the changes in the stack as each individual token is processed as a table.
Assume an input of a correct, space separated, string of tokens of an RPN expression
Test w... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Last_Friday_of_each_month | Last Friday of each month | Task
Write a program or a script that returns the date of the last Fridays of each month of a given year.
The year may be given through any simple input method in your language (command line, std in, etc).
Example of an expected output:
./last_fridays 2012
2012-01-27
2012-02-24
2012-03-30
2012-04-27
2012-05-25
20... | #Seed7 | Seed7 | $ include "seed7_05.s7i";
include "time.s7i";
include "duration.s7i";
const proc: main is func
local
var integer: weekday is 1; # 1 for monday, 2 for tuesday, and so on up to 7 for sunday.
var integer: year is 0;
var integer: month is 1;
var time: aDate is time.value;
var time: selected is t... | Give a code snippet in #Seed7
Task
Write a program or a script that returns the date of the last Fridays of each month of a given year.
The year may be given through any simple input method in your language (command line, std in, etc).
Example of an expected output:
./last_fridays 2012
2012-01-27
2012-02-24
2012... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Exponentiation_operator | Exponentiation operator | Most programming languages have a built-in implementation of exponentiation.
Task
Re-implement integer exponentiation for both intint and floatint as both a procedure, and an operator (if your language supports operator definition).
If the language supports operator (or procedure) overloading, then an ov... | #D | D | import std.stdio, std.conv;
struct Number(T) {
T x; // base
alias x this;
string toString() const { return text(x); }
Number opBinary(string op)(in int exponent)
const pure nothrow @nogc if (op == "^^") in {
if (exponent < 0)
assert (x != 0, "Division by zero");
} body {
... | Give a code snippet in #D
Most programming languages have a built-in implementation of exponentiation.
Task
Re-implement integer exponentiation for both intint and floatint as both a procedure, and an operator (if your language supports operator definition).
If the language supports operator (or procedu... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Discordian_date | Discordian date |
Task
Convert a given date from the Gregorian calendar to the Discordian calendar.
| #C.2B.2B | C++ |
#include <iostream>
#include <algorithm>
#include <vector>
#include <sstream>
#include <iterator>
using namespace std;
class myTuple
{
public:
void set( int a, int b, string c ) { t.first.first = a; t.first.second = b; t.second = c; }
bool operator == ( pair<int, int> p ) { return p.first == t.first.first && ... | Give a code snippet in #C.2B.2B
Task
Convert a given date from the Gregorian calendar to the Discordian calendar.
| christopher/rosetta-code | |
http://rosettacode.org/wiki/Bell_numbers | Bell numbers | Bell or exponential numbers are enumerations of the number of different ways to partition a set that has exactly n elements. Each element of the sequence Bn is the number of partitions of a set of size n where order of the elements and order of the partitions are non-significant. E.G.: {a b} is the same as {b a} and {a... | #Common_Lisp | Common Lisp | ;; The triangle is a list of arrays; each array is a
;; triangle's row; the last row is at the head of the list.
(defun grow-triangle (triangle)
(if (null triangle)
'(#(1))
(let* ((last-array (car triangle))
(last-length (length last-array))
(new-array (make-array (1+ last-l... | Give a code snippet in #Common_Lisp
Bell or exponential numbers are enumerations of the number of different ways to partition a set that has exactly n elements. Each element of the sequence Bn is the number of partitions of a set of size n where order of the elements and order of the partitions are non-significant. E.... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Create_an_HTML_table | Create an HTML table | Create an HTML table.
The table body should have at least three rows of three columns.
Each of these three columns should be labelled "X", "Y", and "Z".
An extra column should be added at either the extreme left or the extreme right of the table that has no heading, but is filled with sequential row numbers.
The... | #PowerShell | PowerShell |
# Converts Microsoft .NET Framework objects into HTML that can be displayed in a Web browser.
ConvertTo-Html -inputobject (Get-Date)
# Create a PowerShell object using a HashTable
$object = [PSCustomObject]@{
'A'=(Get-Random -Minimum 0 -Maximum 10);
'B'=(Get-Random -Minimum 0 -Maximum 10);
'... | Give a code snippet in #PowerShell
Create an HTML table.
The table body should have at least three rows of three columns.
Each of these three columns should be labelled "X", "Y", and "Z".
An extra column should be added at either the extreme left or the extreme right of the table that has no heading, but is fille... | christopher/rosetta-code | |
http://rosettacode.org/wiki/Angles_(geometric),_normalization_and_conversion | Angles (geometric), normalization and conversion | This task is about the normalization and/or conversion of (geometric) angles using
some common scales.
The angular scales that will be used in this task are:
degree
gradian
mil
radian
Definitions
The angular scales used or referenced here:
turn is a full turn or 360 degrees, also shown as 360º
... | #FreeBASIC | FreeBASIC | #define PI 3.1415926535897932384626433832795028842
#define INVALID -99999
function clamp( byval n as double, lo as double, hi as double ) as double
while n <= lo
n += (hi - lo)/2
wend
while n >= hi
n += (lo - hi)/2
wend
return n
end function
function anglenc( byval angle as doubl... | Give a code snippet in #FreeBASIC
This task is about the normalization and/or conversion of (geometric) angles using
some common scales.
The angular scales that will be used in this task are:
degree
gradian
mil
radian
Definitions
The angular scales used or referenced here:
turn is a full turn ... | christopher/rosetta-code |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.