Datasets:
sample_id stringlengths 7 7 | original_index int64 6 1.1k | video_id stringlengths 11 11 | match_score float64 85 100 | math_start float64 11.4 4.73k | math_end float64 14.7 4.74k | realigned bool 1
class | context_before_start float64 5.07 4.7k | context_before stringlengths 71 565 | lead_in stringlengths 0 91 | lead_out stringlengths 0 56 | context_after stringlengths 15 556 |
|---|---|---|---|---|---|---|---|---|---|---|---|
ms_0723 | 723 | --lPz7VFnKI | 95.6 | 2,134.59 | 2,144.1 | true | 2,105.75 | and the denominator 3!. So the signs are
going to alternate, the powers are all even,
and the denominators are these factorials. Several times as this
course has gone on, the error function has
made an appearance. The error function was, I guess
it gets normalized by putting a | a | in front, | and it's the integral of
e^(-t^2) dt from 0 to x. And this normalization
is here because as x gets to be large
the value becomes 1. So this error function is
very important in the theory of probability. And I think you calculated
this fact at some point in the course. |
ms_0744 | 744 | 0D4BbCa4gHo | 95 | 1,318.35 | 1,322.69 | true | 1,296 | out before that if you're moving
along some trajectory, say you're going in that
direction, then when you're at this point,
the velocity vector is going to be tangential to the trajectory.
It tells you the direction of motion in particular.
So, if you want a unit vector that goes in the same direction,
all you have to ... | So, it's | So, it seems like now we have a
lot of different things that should be related in some way.
So, let's see what we can say. Well, we can say that dr by dt,
so, that's the velocity vector, | |
ms_0168 | 168 | 0D4BbCa4gHo | 100 | 2,644.37 | 2,650.97 | true | 2,622 | that r cross v equals a constant
vector, OK? That's what the law says.
So, in terms of derivatives, it means | it means | OK, now, so there's an
interesting thing to note, which is that we can use the
usual product rule for derivatives with vector
expressions, with dot products or cross
products. There's only one catch,
which is that when we differentiate a cross product,
we have to be careful that the guy on the left stays on the
left. T... | |
ms_0827 | 827 | 15HVevXRsBA | 100 | 296.16 | 300.44 | true | 263.41 | hyperbola, and I am asking
myself what is the point on it that is the closest to the
origin? I mean we can solve this by
elementary geometry, we don't need actually Lagrange
multipliers, but we are going to do it with
Lagrange multipliers because it is a pretty good example.
What does it mean? Well, it means that we wa... | y) and then the distance to the origin is | Well, do we really want to | minimize that or can we minimize
something easier? Yeah.
Maybe we can minimize the square of a distance.
Let's forget this guy and instead -- Actually,
we will minimize f of x, y equals x squared plus y
squared, that looks better,
subject to the constraint xy = |
ms_0828 | 828 | 15HVevXRsBA | 100 | 823.58 | 827.74 | true | 799.68 | be proportional to gradient g.
That means that f sub x should be lambda times g sub x,
and f sub y should be lambda times g sub y.
Because the gradient vectors here are f sub x,
f sub y and g sub x, g sub y.
If you have a third variable z then you have also an equation | then you have also an equation | Now, let's see.
How many unknowns do we have in these equations?
Well, there is x, there is y and there is lambda.
We have three unknowns and have only two equations.
Something is missing. Well, I mean x and y are not
actually independent. They are related by the
equation g of x, y equals c, so we need to add
the const... | |
ms_0832 | 832 | 15HVevXRsBA | 100 | 859.2 | 861.46 | true | 829.79 | Now, let's see.
How many unknowns do we have in these equations?
Well, there is x, there is y and there is lambda.
We have three unknowns and have only two equations.
Something is missing. Well, I mean x and y are not
actually independent. They are related by the
equation g of x, y equals c, so we need to add the const... | y equals c, so we need to add the constraint | And now we have three equations
involving three variables. Let's see how that works.
Here remember we have f equals x squared y squared and g = xy.
What is f sub x? It is going to be 2x equals
lambda times, | |
ms_0829 | 829 | 15HVevXRsBA | 100 | 900.09 | 907.59 | true | 879.26 | x squared y squared and g = xy.
What is f sub x? It is going to be 2x equals
lambda times, what is g sub x,
y. Maybe I should write here f sub
x equals lambda g sub x just to remind you. Then we have | remind you. Then we have | is 2y equals lambda | times g sub y is x.
And then our third equation g equals c becomes xy equals
three. So, that is what you would have
to solve. Any questions at this point?
No. Yes?
How do I know the direction of |
ms_0831 | 831 | 15HVevXRsBA | 100 | 910.11 | 913.39 | true | 885.28 | It is going to be 2x equals
lambda times, what is g sub x,
y. Maybe I should write here f sub
x equals lambda g sub x just to remind you.
Then we have f sub y equals lambda g sub y.
F sub y is 2y equals lambda times | times | And then our third equation g | equals c becomes xy equals
three. So, that is what you would have
to solve. Any questions at this point?
No. Yes?
How do I know the direction of a gradient?
Do you mean how do I know that it is perpendicular to a level
curve? |
ms_0833 | 833 | 15HVevXRsBA | 100 | 1,163.67 | 1,171.91 | true | 1,134.14 | I am going to justify that soon.
It could be minimum or maximum. In three-dimensions it could
even be a saddle point. And, in fact,
I should say in advance, this method will not tell us
whether it is a minimum or a maximum.
We do not have any way of knowing, except for testing
values. We cannot use second derivative
te... | favor x. Then you can minimize | In general, if I am trying to | solve a more complicated
problem, I might not be able to solve.
I am doing an example where, indeed, here you could solve
and remove one variable, but you cannot always do that.
And this method will still work. The other one won't.
OK. I don't see any other questions.
Are there any other questions? No.
OK. I see a lot ... |
ms_0836 | 836 | 15HVevXRsBA | 100 | 1,382.45 | 1,386.63 | true | 1,357.77 | exist only if determinant of a
matrix is zero. M is this guy.
Let's compute the determinant. Well, that seems to be | Well, that seems to be | That is zero exactly when
lambda squared equals four, which is lambda is plus or
minus two. Already you see here it is a
the level of difficulty that is a little bit much for an exam
but perfectly fine for a problem set or for a beautiful lecture
like this one. How do we deal with -- Well,
we have two cases to look at.... | |
ms_0837 | 837 | 15HVevXRsBA | 100 | 1,390.15 | 1,392.87 | true | 1,366.49 | M is this guy.
Let's compute the determinant. Well, that seems to be negative
four plus lambda squared. That is zero exactly when | That is zero exactly when | which is lambda is plus or
minus two. Already you see here it is a
the level of difficulty that is a little bit much for an exam
but perfectly fine for a problem set or for a beautiful lecture
like this one. How do we deal with -- Well,
we have two cases to look at. Lambda equals two or lambda
equals minus two. Let's s... | |
ms_0838 | 838 | 15HVevXRsBA | 100 | 1,393.29 | 1,400.55 | true | 1,366.49 | M is this guy.
Let's compute the determinant. Well, that seems to be negative
four plus lambda squared. That is zero exactly when
lambda squared equals four, which is | which is | Already you see here it is a
the level of difficulty that is a little bit much for an exam
but perfectly fine for a problem set or for a beautiful lecture
like this one. How do we deal with -- Well,
we have two cases to look at. Lambda equals two or lambda
equals minus two. Let's start with lambda equals
two. If I set ... | |
ms_0839 | 839 | 15HVevXRsBA | 100 | 1,440.74 | 1,443.18 | true | 1,413.78 | How do we deal with -- Well,
we have two cases to look at. Lambda equals two or lambda
equals minus two. Let's start with lambda equals
two. If I set lambda equals two,
what does this equation become? Well, it becomes x equals y.
This one becomes y equals x. Well, they seem to be the same.
x equals y. And then the equa... | well, | I have two solutions. | One is x equals root three and,
therefore, y equals root three as well, or negative root three
and negative root three. Let's look at the other case.
If I set lambda equal to negative two then I get 2x
equals negative 2y. That means x equals negative y.
The second one, |
ms_0438 | 438 | 1RLctDS2hUQ | 92.6 | 1,604.09 | 1,610.26 | true | 1,568.43 | and there's nothing there. So this is the case. You can also interpret
it a F(a) - F(a). So that's also consistent
with our interpretation. In terms of the fundamental
theorem of calculus. And it's perfectly reasonable
that this is the case. Now, the fifth property
is a definition. It's not really a property. But it's ... | The integral from a to b of f(x) dx equal to | Now, really, the right-hand side
here is an undefined quantity so far. We never said you
could ever do this where the a is less than the b. Because this is
working backwards here. But we just have a convention
that that's the definition. Whenever we write
down this number, it's the same as minus
what that number is. An... | |
ms_1044 | 1,044 | 2-5oq-igwtU | 100 | 14.59 | 23.02 | true | 5.79 | PROFESSOR: Welcome
to this recitation on damped harmonic oscillators. So here you're asked to
assume an unforced, overdamped spring-mass-dashpot that started at | spring-mass-dashpot that started at | so rest, and to show that it never | crosses the equilibrium
position, x equal to 0, for t larger than 0. The second part of
the problem asks you to show that regardless
of the initial condition, this overdamped
oscillator can not cross the equilibrium position
more than one time, or more than once. OK. So why don't you
pause the video, try to think about... |
ms_0843 | 843 | 23xbkrpQuAo | 100 | 415.13 | 417.17 | true | 386 | because, well,
they call this g. Then, g equals eight is
constant. That means we set dg equal to
zero. OK, so, now let's just plug in
some values at this point. That tells us, well, so if | That tells us, well, so if | that's 4dx plus z is one.
So, dy plus y 3z^2 should be 6dz equals zero.
And now, this equation, here, tells us about a relation
between the changes in x, y, and z near that point.
It tells us how you change x and y, well, how z will change.
Or, it tells you actually anything you might want to know
about the relations b... | |
ms_0846 | 846 | 23xbkrpQuAo | 100 | 500.85 | 506.94 | true | 477 | function of x and y,
then what we will do is we will just move the dz's to the other
side, and it will tell us dz equals
minus one over six times 4dx plus dy.
And, so that should tell you that | that | Well, that's minus two thirds,
and partial z over partial y is going to be minus one sixth.
OK, another way to think about this: when we compute partial z
over partial x, that means that actually we
keep y constant. OK, let me actually add some
subtitles here. So, here that means we keep y
constant. | |
ms_0847 | 847 | 23xbkrpQuAo | 94.5 | 628.32 | 632.31 | true | 597 | Yes, OK, let me explain that
again. So we found an expression for
dz in terms of dx and dy. That means that this thing,
the differential, is the total differential of z
viewed as a function of x and y. OK, and so the coefficients of
dx and dy are the partials. Or, another way to think about
it, if you want to know part... | place of dy. So, you will be left with | And, that will give you the | rate of change of z with respect
to x when you keep y constant, OK?
So, there are various ways to think about this,
but hopefully it makes sense. OK, so how do we think about
this in general? Well, if we know that g of x,
y, z equals a constant, |
ms_0848 | 848 | 23xbkrpQuAo | 100 | 768.61 | 780.08 | true | 743 | that's going to be the
coefficient of dx in here, or just to write down the other
way. We are setting y equals
constant. So, that means we set dy equal
to zero. And then, we get dz equals
negative gx over gz dx. So, that means | So, that means | And, see,
that's a very counterintuitive formula because you have this
minus sign that you somehow probably couldn't have seen come
if you hadn't actually derived things this way.
I mean, it's pretty surprising to see that minus sign come out
of nowhere the first time you see it.
OK, so now we know how to find the rate... | |
ms_0849 | 849 | 23xbkrpQuAo | 100 | 1,654.17 | 1,657.45 | true | 1,630 | first.
Let's say keep a constant. And, that means that b will
change. b is going to be some function
of a and theta. Well, in fact here,
we know what the function is because we can solve the
constraint, namely, | But we don't actually need to | know that so that the triangle,
so that the right angle, so that we keep a right angle.
And, so the name we will have for this is partial a over
partial theta with a held constant, OK?
And, the fact that I'm not putting b in my subscript there
means that actually b will be a | |
ms_0850 | 850 | 23xbkrpQuAo | 87.5 | 2,181.11 | 2,185.57 | true | 2,156 | And now, if we express the area
in terms of a and theta only, A is one half of ab cosine,
sorry, ab sine theta is now one half of a^2 sine theta over
cosine theta. Or, if you prefer, | Or, if you prefer, | Well, now that it's only a
function of a and theta, I know what it means to take
the partial derivative with respect to theta,
keeping a constant. I know how to do it.
So, partial A over partial theta,
a held constant, well, if a is a constant,
then I get this one half a^2 coming out times,
what's the derivative of | |
ms_0851 | 851 | 23xbkrpQuAo | 100 | 2,410.37 | 2,419.09 | true | 2,387 | if we have a constraint that's
relating da, db, and d theta,
OK, so that's actually what we did, right,
that's the same sort of thing as what we did at the beginning
when we related dx, dy, and dz.
That's really the same thing, except now are variables are a,
b, and theta. Now, we know that also we are
keeping a fixed.... | So, we have | That means that actually we | know how to solve for db.
OK, so cosine theta db equals b sine theta d theta or db is b
tangent theta d theta. OK, so in fact,
what we found, if you want,
is the rate of change of b with respect to theta.
Why do we care? Well, we care because let's
look, now, at dA, |
ms_0852 | 852 | 23xbkrpQuAo | 100 | 2,465.91 | 2,470.92 | true | 2,433 | sine theta d theta or db is b
tangent theta d theta. OK, so in fact,
what we found, if you want,
is the rate of change of b with respect to theta.
Why do we care? Well, we care because let's
look, now, at dA, the function that we want to
look at. OK, so the function is | OK, so the function is | Well, then, dA,
so we had to use the product rule carefully,
or we use the partials. So, the coefficient of d little
a will be partial with respect to little a.
That's one half b sine theta da plus coefficient of db will be
one half a sine theta db plus coefficient of d theta will be
one half ab cosine theta d | |
ms_0853 | 853 | 23xbkrpQuAo | 100 | 2,604.41 | 2,619.52 | true | 2,576 | So, if we plug this one into
that one, we get da equals one half a sine theta times b
tangent theta d theta plus one half ab cosine theta d theta.
And, if we collect these things together, we get | together, we get | And, if you know your trig, | but you'll see that this is
sine squared over cosine plus cosine squared over cosine.
That's the same as secan theta. So, now you have expressed da
as something times d theta. Well, that coefficient is the
rate of change of A with respect to theta with the understanding
that we are keeping a fixed, and letting b vary a... |
ms_1081 | 1,081 | 2IBWxERRjvM | 88.9 | 324.36 | 328.66 | true | 294.31 | Sorry. 1 over root 13 is multiplying
both the sine and the cosine. And we see that the second
term is purely imaginary. So when we take the real
part of a real number plus an imaginary
number, we just are left with the real
number at the end of the day. So the answer we're looking for is | So the answer we're looking for is | where from before phi is the arctangent | of 3/2. And phi can also be thought
of-- the angle being between zero and pi over 2. OK. So this concludes the
polar form computation. Secondly, we also have
to compute this using a rectangular form calculation. So let's do the calculation
in rectangular form. |
ms_0821 | 821 | 2XraaWefBd8 | 100 | 1,740.06 | 1,746.23 | true | 1,717 | So -- [APPLAUSE] OK,
so the level corresponds to delta w equals zero,
and its tangent plane corresponds to four delta x plus | corresponds to four delta x plus | That's what I'm trying to say, | basically.
And, what's delta x? Well, that means it's the
change in x. So, what's the change in x here?
That means, well, we started with x equals two,
and we moved to some other value, x.
So, that's actually x- 2, right? That's how much x has changed
compared to 2. And, two times (y - 1) minus
two times z - 1 = 0. Tha... |
ms_0825 | 825 | 2XraaWefBd8 | 100 | 2,641.71 | 2,652.26 | true | 2,622 | [APPLAUSE]
I see you guys are having fun. OK, OK, let's do a little bit
of geometry here. That should calm you down.
So, we said dw/ds in the direction of u is | direction of u is | That's the same as the length
of gradient w times the length of u.
Well, that happens to be one because we are taking the unit
vector times the cosine of the angle between the gradient and
the given unit vector, u, so, have this angle, theta.
OK, that's another way of | |
ms_0786 | 786 | 3_goGnJm5sA | 100 | 1,148.77 | 1,153.87 | true | 1,122 | function,
a general function, not just one that's quadratic
like this, then there will actually be
other terms maybe involving higher powers,
maybe x^3 or y^3 or things like that.
And then, they will mess up what happens in this valley.
And, it's a situation where we won't be able,
actually, to tell automatically just ... | say, | well, if you try to decide what
type of point the origin is, you're going to take the second
derivative. It will be zero,
and then you can conclude. Those things depend on higher
order derivatives. So, we just won't like that
case. We just won't try to figure out
what's going on here. Now, the last situation is if
4ac-... | |
ms_0788 | 788 | 3_goGnJm5sA | 91.7 | 1,511.27 | 1,518.13 | true | 1,487 | where does the quadratic
formula come in here? Well, let me write things
differently. OK, so we've manipulated
things, and got into a conclusion.
But, let me just do a different manipulation,
and write this now instead as | plus b(x over y) plus c. | OK, see, that's the same thing
that I had before. Well, so now this quantity here
is always nonnegative. What about this one?
Well, of course, this one depends on x over y.
It means it depends on which direction you're going to move
away from the origin, which ratio between x and y you
will consider. But, I claim there... | |
ms_0790 | 790 | 3_goGnJm5sA | 85.5 | 1,515.01 | 1,522.34 | true | 1,487 | where does the quadratic
formula come in here? Well, let me write things
differently. OK, so we've manipulated
things, and got into a conclusion.
But, let me just do a different manipulation,
and write this now instead as y^2 times a times x | y^2 times a times x | OK, see, that's the same thing
that I had before. Well, so now this quantity here
is always nonnegative. What about this one?
Well, of course, this one depends on x over y.
It means it depends on which direction you're going to move
away from the origin, which ratio between x and y you
will consider. But, I claim there... | |
ms_0936 | 936 | 44R5HgbrUmc | 100 | 328.35 | 332.73 | true | 299 | But, the goal of the game is to
set up the triple integral. It's not actually to find the
volume. So, what does that look like?
Well, z = x ^2 y ^2, that's one of our favorite
paraboloids. That's something that looks
like a parabola with its bottom at the origin that you spin
about the z axis. And, | And, | well, that's also a paraboloid.
But, this one is pointing down, and when you take x equals y
equals zero, you get z equals four.
So, it starts at four, and it goes down like that.
OK, so the solid that we'd like to consider is what's in between
in here. So, it has a curvy top which is
this downward paraboloid, a curvy ... | |
ms_0935 | 935 | 44R5HgbrUmc | 100 | 500.17 | 503.26 | true | 469 | minus y squared.
The bottom value of z is x squared plus y squared.
OK, so if I want to start to set this up, I will write the
triple integral. And then, so let's say I'm
going to do it dz first, and then, say,
dy dx. It doesn't really matter.
So then, for a given value of x and y, I claim z goes from the
bottom surfac... | The bottom face is | The top face is four minus x
squared minus y squared. OK, is that OK with everyone?
Yeah? Any questions so far?
Yes? Why did I start with z?
That's a very good question. So, I can choose whatever order
I want, but let's say I did x first .
Then, to find the inner integral bounds,
I would need to say, OK, I've chosen va... | |
ms_0937 | 937 | 44R5HgbrUmc | 100 | 812.15 | 817.73 | true | 791 | z is less than the top value of
z, I mean, less or less than or
equal, that's the same thing. So, if the bottom value of z is
x squared plus y squared should be less than four minus x
squared minus y squared, and if you solve for that,
then you will get, well, so let's move these guys
over here. You'll get | You'll get | That becomes x squared plus y
squared less than two. So, that means that's a disk of
radius square root of two, OK?
So, we kind of knew in advance it was going to be a disk,
but what we've learned now is that this radius is square root
of two. So, if we want to set up,
if we really want to set it up | |
ms_0938 | 938 | 44R5HgbrUmc | 100 | 867.05 | 871.24 | true | 836 | it was going to be a disk,
but what we've learned now is that this radius is square root
of two. So, if we want to set up,
if we really want to set it up using dy dx like they started,
then we can do it because we know,
so, for the middle integral, now,
we want to fix a value of x. And, for that fixed value of x,
we wa... | Well, here, | And, here it's negative square
root of two minus x squared. So, y will go from negative
square root of two minus x squared to positive square root.
And then, x will go from negative root two to root two.
OK, if that's not completely clear to you,
then I encourage you to go over how we set up double integrals
again. OK,... | |
ms_0939 | 939 | 44R5HgbrUmc | 100 | 961.38 | 971.21 | true | 930 | what used to be the inner
integral. So, in the inner,
remember, you fix the value of x, and you ask yourself,
what is the range of values of y in my region?
So, y goes from here to here, and what here and here are
depends on the value of x. How?
Well, we have to find the relation between x and y at
these points. These ... | And, if you solve for y, given x, you get | OK? | Yes?
Is there a way to compute this with symmetry?
Well, certainly, yeah, this solid looks
sufficiently symmetric, but actually you could
certainly, if you don't want to do the
whole disk, you could just do quarter
disks, and multiply by four.
You could even just look at the lower half of the solid,
and multiply them b... |
ms_0940 | 940 | 44R5HgbrUmc | 100 | 2,671.19 | 2,676.94 | true | 2,649 | one minus y inside the unit ball
centered at the origin. So, the unit ball is just,
you know, well, stay inside of the unit sphere.
So, its equation, if you want, would be | if you want, would be | OK, so that's one thing you
should remember. The equation of a sphere
centered at the origin is x squared plus y squared plus z
squared equals radius squared. And now, we are going to take
this plane, z equals one minus y.
So, if you think about it, it's parallel to the x axis
because there's no x in its coordinate in ... | |
ms_0941 | 941 | 44R5HgbrUmc | 100 | 2,684.86 | 2,691.38 | true | 2,658 | So, the unit ball is just,
you know, well, stay inside of the unit sphere.
So, its equation, if you want,
would be x squared plus y squared plus z squared less than
one. OK, so that's one thing you
should remember. The equation of a sphere
centered at the origin is x squared plus y squared plus z
squared equals radius ... | And now, we are going to take this plane, | So, if you think about it, | it's parallel to the x axis
because there's no x in its coordinate in its equation.
At the origin, the height is one.
So, it starts right here at one. And, it slopes down with y with
slope one. OK, so it's a plane that comes
straight out here, and it intersects the sphere,
so here and here, but also at other points in
... |
ms_0942 | 942 | 44R5HgbrUmc | 100 | 2,816.15 | 2,826.46 | true | 2,784 | to set up that double integral,
sorry, the triple integral, well, so let's say we do it in
rectangular coordinates because we are really evil.
[LAUGHTER] So then, the bottom surface,
OK, so we do it with z first. So, the bottom surface is the
slanted plane. So, the bottom value would be z
equals one minus y. The top va... | The top value is on the sphere. So, the sphere corresponds to | So, you'd go from the plane to
the sphere. And then, to find the bounds
for x and y, you have to figure out what exactly,
what the heck is this region here?
So, what is this region? Well, we have to figure out,
for what values of x and y the plane is below the ellipse.
So, the condition is that, sorry, the plane is bel... | |
ms_0943 | 943 | 44R5HgbrUmc | 100 | 2,851.63 | 2,858.69 | true | 2,821 | So, you'd go from the plane to
the sphere. And then, to find the bounds
for x and y, you have to figure out what exactly,
what the heck is this region here?
So, what is this region? Well, we have to figure out,
for what values of x and y the plane is below the ellipse.
So, the condition is that, sorry, the plane is bel... | That means | So, you have to somehow | manipulate this to extract
something simpler. Well, probably the only way to
do it is to square both sides, one minus y squared should be
less than one minus x squared minus y squared.
And, if you work hard enough, you'll find quite an ugly
equation. But, you can figure out what
are, then, the bounds for x given y, and... |
ms_1017 | 1,017 | 4gJLEYc3p5w | 86.9 | 11.44 | 14.68 | true | 7.35 | PROFESSOR: Welcome back. In this session, we're going to tackle initial value problem | In this session, we're going to tackle initial value problem | And this initial
value problem is going to be subject to the
initial condition, y of 0 equals to 3. We are going to use the
method of integration factor. And what I want you to use
is both definite integrals and indefinite integrals. | |
ms_1018 | 1,018 | 4gJLEYc3p5w | 100 | 17.28 | 19.88 | true | 7.35 | PROFESSOR: Welcome back. In this session, we're going to
tackle initial value problem y dot plus t*y equals to t. And this initial
value problem is going to be subject to the initial condition, | going to be subject to the initial condition, | We are going to use the
method of integration factor. And what I want you to use
is both definite integrals and indefinite integrals. | |
ms_1019 | 1,019 | 4gJLEYc3p5w | 100 | 151.24 | 157.69 | true | 126.54 | involves an exponential of the
integral of the right-hand side after dividing by u,
which gives us exponential of t squared over 2. So integrating factor is
just using a trick so that we simplify our left-hand side
and write it in the form of the derivative
of the product, y*u. So now, we identified
our integration fac... | It's | Now, we can go back
to our equation. And I'm going to just
label it with a star here. So now, this equation
is written in this form. t. and the integral of just
basically derivative, just itself. So if we use first the approach
of definite integrals-- actually, we're going
to switch the order, and I'm going to start wi... | |
ms_1020 | 1,020 | 4gJLEYc3p5w | 100 | 252.82 | 256.04 | true | 225.45 | But we are in the case of
a differential equation where we need a
constant of integration. And again, here, we would
end up with two constants of integration on both sides. But given that we are dealing
with a first-order differential equation, we can regroup
that in one constant. And then, we can just
find our solutio... | both sides by | So I'm just going
to write it down. Then, it just gives
us exponential minus t squared over 2 multiplied by
exponential t squared over 2, which is 1 and c exponential
of minus t squared over 2. So that's our solution. But remember that we're trying
to solve an initial value problem they subject to
an initial condition. | |
ms_1021 | 1,021 | 4gJLEYc3p5w | 100 | 301.2 | 305.89 | true | 272.08 | which is 1 and c exponential
of minus t squared over 2. So that's our solution. But remember that we're trying
to solve an initial value problem they subject to
an initial condition. And our initial
condition is y of 0 equals to 3, which
means that here, y of 0 would give us exponential to
0, which is just a constant. ... | So we end up with | Therefore, c is equal to 2. And the final form
of the solution would just be 1
plus 2 exponential of minus t squared over 2. So we started with the
indefinite integral. So what if we would do this
using definite integrals? So we don't need to
start from the beginning. We just need to take the
problem a few steps before | |
ms_1022 | 1,022 | 4gJLEYc3p5w | 100 | 476.03 | 481.34 | true | 439.07 | So again, we end up with u*y
minus u dot y evaluated at 0. However, u of 0 is
just the function exponential to t squared over
2 evaluated at 0, which is 1. And y of 0, we have it because
that was our initial condition, and this is only 3. So we have u*y minus 1 dot 3,
which is just basically minus 3. And on the right-h... | And on the right-hand side, we have exponential of t squared over 2 minus 1, which gives us | Now bring in this minus 3 on the | of t squared over 2 minus 1. Now bring in this minus
3 on the other side, you now have a plus 3,
all of this multiplied by 1 over u, which was our
exponential of minus t squared over 2. And therefore, we end up
with a similar solution that we had for the indefinite
integral, 3 minus 1 is just 2. So we have minus t
squa... |
ms_0038 | 38 | 55ncRlBZstA | 100 | 370.3 | 377.41 | true | 340.82 | So I'm actually going to
write this underneath. So we'll have-- I'm going to put
the plus underneath also so we remember it's a sum. Plus, so the derivative
of sine x is cosine x. And then we have a
times x squared times-- oops-- another cosine
x, the third function. OK? And then the third term,
I take the derivative o... | So I actually have a | here. | I can do some
simplifying if I want. But maybe, if I were
trying to write this nicely for someone who was
reading mathematics, I would put all of the
polynomials in front and all of the
coefficients in front. So to be very kind to someone,
I might write it like this. And notice cosine x cosine
x is cosine squared x. An... |
ms_0039 | 39 | 55ncRlBZstA | 100 | 400.81 | 405.58 | true | 373.93 | squared times the sine x here. I can do some
simplifying if I want. But maybe, if I were
trying to write this nicely for someone who was
reading mathematics, I would put all of the
polynomials in front and all of the
coefficients in front. So to be very kind to someone,
I might write it like this. And notice | And notice | And then minus x
squared sine squared x. And there are other
ways, I could rewrite this and using trig identities. But this is a sufficient
answer at this point. So this is actually a good
way to write the derivative of that function, f of x. And this is where we'll stop. | |
ms_0040 | 40 | 55ncRlBZstA | 100 | 405.49 | 411.41 | true | 380.65 | I can do some
simplifying if I want. But maybe, if I were
trying to write this nicely for someone who was
reading mathematics, I would put all of the
polynomials in front and all of the
coefficients in front. So to be very kind to someone,
I might write it like this. And notice cosine x cosine
x is cosine squared x. An... | And then | And there are other
ways, I could rewrite this and using trig identities. But this is a sufficient
answer at this point. So this is actually a good
way to write the derivative of that function, f of x. And this is where we'll stop. | |
ms_0151 | 151 | 57jzPlxf4fk | 88.9 | 879.98 | 883.56 | true | 850.01 | Is one of them on the plane?
Well, let's check. OK, so let's look at the point,
sorry. I have one blackboard to use
here. So, I take the point Q0,
which is at (-1,2,2). Well, if I plug that into the
plane equation, so, x 2y 4z will equal | so, x 2y 4z will equal | times two plus four | times two.
That's, well, four plus eight,
12 minus one, 11.
That, I think, is bigger than seven.
OK, so Q0 is not in the plane. Let's try again with Q1.
(1,3, - 1) well, if we plug that into x 2y 4z,
we'll have one plus two times |
ms_0729 | 729 | 57jzPlxf4fk | 88.9 | 879.98 | 883.56 | true | 850.01 | Is one of them on the plane?
Well, let's check. OK, so let's look at the point,
sorry. I have one blackboard to use
here. So, I take the point Q0,
which is at (-1,2,2). Well, if I plug that into the
plane equation, so, x 2y 4z will equal | so, x 2y 4z will equal | times two plus four | times two.
That's, well, four plus eight,
12 minus one, 11.
That, I think, is bigger than seven.
OK, so Q0 is not in the plane. Let's try again with Q1.
(1,3, - 1) well, if we plug that into x 2y 4z,
we'll have one plus two times |
ms_0157 | 157 | 57jzPlxf4fk | 91.8 | 1,123.73 | 1,127.79 | true | 1,104.19 | well, (-1 2t) 2( 2 t) 4( 2 -
3t). So, if you simplify this a bit,
you get 2t 2t -12t. That should be -8t. And, the constant term is | That should be -8t. And, the constant term is | 11. OK, and we have to compare that | with seven.
OK, the question is, is this ever equal to seven?
Well, so, Q(t) is in the plane exactly when -8t 11 equals
seven. And, that' the same.
If you manipulate this, you will get t equals one half.
In fact, that's not very |
ms_0158 | 158 | 57jzPlxf4fk | 100 | 1,466.42 | 1,471.53 | true | 1,437.81 | plane.
And so, in general, you have an equation of the
form, something times t plus something equals something.
And, that usually has a single solution.
And, the special case is if this coefficient of t turns out
to be zero in the end, and that's actually going to
happen, exactly when the line is either
parallel or in ... | see, it's | It's the dot product between | the normal vector of a plane and
the vector along the line. So, see, this coefficient
becomes zero exactly when the line is perpendicular to the
normal vector. That means it's parallel to the
plane. So, everything makes sense.
OK, if you're confused about what I just said,
you can ignore it. OK, more questions? No?
OK,... |
ms_0161 | 161 | 57jzPlxf4fk | 100 | 2,889.88 | 2,892.76 | true | 2,857.59 | six times the third derivative
at zero. OK, and you can continue,
and so on. But, we won't need more.
So, if you use this here, it tells you that the sine of a
smaller angle, theta, well,
yeah, it looks like theta. But, if we want to be more
precise, then we should add minus theta cubed over six.
And, cosine of theta, ... | well, it's not quite one. It's close to | OK, so these are slightly | better approximations of sine
and cosine for small angles. So, now, if we try to figure
out, again, what happens to our x of theta, well,
it would be, sorry, theta minus theta cubed
over six. That's theta cubed over six.
And y, on the other hand, is going to be one minus that.
That's about theta squared over |
ms_0163 | 163 | 57jzPlxf4fk | 100 | 2,890.4 | 2,892.76 | true | 2,857.59 | six times the third derivative
at zero. OK, and you can continue,
and so on. But, we won't need more.
So, if you use this here, it tells you that the sine of a
smaller angle, theta, well,
yeah, it looks like theta. But, if we want to be more
precise, then we should add minus theta cubed over six.
And, cosine of theta, ... | well, it's not quite one. It's close to one minus | OK, so these are slightly | better approximations of sine
and cosine for small angles. So, now, if we try to figure
out, again, what happens to our x of theta, well,
it would be, sorry, theta minus theta cubed
over six. That's theta cubed over six.
And y, on the other hand, is going to be one minus that.
That's about theta squared over |
ms_0737 | 737 | 57jzPlxf4fk | 86.3 | 2,890.58 | 2,892.76 | true | 2,863.88 | But, we won't need more.
So, if you use this here, it tells you that the sine of a
smaller angle, theta, well,
yeah, it looks like theta. But, if we want to be more
precise, then we should add minus theta cubed over six.
And, cosine of theta, well, it's not quite one.
It's close to one minus theta | OK, so these are slightly | better approximations of sine
and cosine for small angles. So, now, if we try to figure
out, again, what happens to our x of theta, well,
it would be, sorry, theta minus theta cubed
over six. That's theta cubed over six.
And y, on the other hand, is going to be one minus that.
That's about theta squared over | |
ms_0162 | 162 | 57jzPlxf4fk | 100 | 2,910.2 | 2,920.3 | true | 2,886.42 | well, it's not quite one.
It's close to one minus theta squared over two.
OK, so these are slightly better approximations of sine
and cosine for small angles. So, now, if we try to figure
out, again, what happens to our x of theta, well,
it would be, sorry, | sorry, | And y, on the other hand, is going to be one minus that. | That's theta cubed over six.
And y, on the other hand, is going to be one minus that.
That's about theta squared over two.
So, now, which one of them is bigger when theta is small?
Yeah, y is much larger. OK, if you take the cube of a
very small number, it becomes very,
very, very small. So, in fact,
we can look at tha... |
ms_0738 | 738 | 57jzPlxf4fk | 100 | 2,910.2 | 2,920.3 | true | 2,886.42 | well, it's not quite one.
It's close to one minus theta squared over two.
OK, so these are slightly better approximations of sine
and cosine for small angles. So, now, if we try to figure
out, again, what happens to our x of theta, well,
it would be, sorry, | sorry, | And y, on the other hand, is going to be one minus that. | That's theta cubed over six.
And y, on the other hand, is going to be one minus that.
That's about theta squared over two.
So, now, which one of them is bigger when theta is small?
Yeah, y is much larger. OK, if you take the cube of a
very small number, it becomes very,
very, very small. So, in fact,
we can look at tha... |
ms_0183 | 183 | 60VGKnYBpbg | 100 | 1,748.16 | 1,753.54 | true | 1,721 | That's the basic separation. That's the procedure that
we're always going to use. And now if I
integrate that, I find that on the right-hand side
I have the logarithm of y. And on the left-hand--
Sorry, on the left-hand side I have the logarithm of y. On the right-hand side, I have | On the right-hand side, I have | So let's see what
happens to this example. This is an implicit
equation, and of course we have the problems of the
plus or minus signs, which I'm not going to worry
about until later. So let's exponentiate
and see what happens. We get e^(ln y)
= e^(2 ln x + c). So, again, this is y
on the left-hand side. | |
ms_0145 | 145 | 60e4hdCi1D4 | 100 | 150.37 | 154.29 | true | 119 | actually, how to compute these
things as iterated integrals. First, integrating over dy and
then over dx, or the other way around.
One example that we did, in particular,
was to compute the double integral of a quarter of a unit
disk. That was the region where | That was the region where | is less | than one and x and y are
positive, of one minus x squared minus y squared dA.
Well, hopefully, I kind of convinced you that we
can do it using enough trig and substitutions and so on,
but it is not very pleasant. And the reason for that is that
using x and y coordinates here does not seem very appropriate.
In fact, we ... |
ms_0875 | 875 | 60e4hdCi1D4 | 100 | 150.37 | 154.29 | true | 119 | actually, how to compute these
things as iterated integrals. First, integrating over dy and
then over dx, or the other way around.
One example that we did, in particular,
was to compute the double integral of a quarter of a unit
disk. That was the region where | That was the region where | is less | than one and x and y are
positive, of one minus x squared minus y squared dA.
Well, hopefully, I kind of convinced you that we
can do it using enough trig and substitutions and so on,
but it is not very pleasant. And the reason for that is that
using x and y coordinates here does not seem very appropriate.
In fact, we ... |
ms_0137 | 137 | 60e4hdCi1D4 | 100 | 156.35 | 159.49 | true | 127 | First, integrating over dy and
then over dx, or the other way around.
One example that we did, in particular,
was to compute the double integral of a quarter of a unit
disk. That was the region where x
squared plus y squared is less than one and x and y are positive, of | than one and x and y are positive, of | dA. Well, hopefully, | I kind of convinced you that we
can do it using enough trig and substitutions and so on,
but it is not very pleasant. And the reason for that is that
using x and y coordinates here does not seem very appropriate.
In fact, we can use polar coordinates instead to compute
this double integral. |
ms_0135 | 135 | 60e4hdCi1D4 | 100 | 222.73 | 226.05 | true | 196 | Remember that polar coordinates
are about replacing x and y as coordinates for a point on a
plane by instead r, which is the distance from the
origin to a point, and theta,
which is the angle measured counterclockwise from the
positive x-axis. In terms of r and theta, you have | In terms of r and theta, you have | y equals r sine theta. The claim is we are able, | actually, to do double
integrals in polar coordinates. We just have to learn how to.
Just to draw a quick picture -- When we were integrating in x,
y coordinates, in rectangular coordinates,
we were slicing our region by gridlines that were either
horizontal or vertical. And we used that to set up the
iterated integral... |
ms_0136 | 136 | 60e4hdCi1D4 | 100 | 225.49 | 231.49 | true | 202 | coordinates for a point on a
plane by instead r, which is the distance from the
origin to a point, and theta,
which is the angle measured counterclockwise from the
positive x-axis. In terms of r and theta,
you have x equals r cosine theta, | theta, | The claim is we are able, | actually, to do double
integrals in polar coordinates. We just have to learn how to.
Just to draw a quick picture -- When we were integrating in x,
y coordinates, in rectangular coordinates,
we were slicing our region by gridlines that were either
horizontal or vertical. And we used that to set up the
iterated integral... |
ms_0138 | 138 | 60e4hdCi1D4 | 100 | 569.43 | 572.43 | true | 546 | that I put up here.
Concretely, how do I do it here? Well, my function f was given
as one minus x squared minus y squared.
And I would like to switch that to polar coordinates.
I want to put r and theta in there.
Well, I have formulas for x and y in polar coordinates so I
could just replace x squared by | y squared by r squared sine | squared theta.
And that works just fine. But maybe you can observe that
this is x squared plus y squared.
It is just the square of a distance from the origin,
so that is just r squared. That is a useful thing.
You don't strictly need it, but it is much faster if you
see this right away. It saves you writing down a
sine... | |
ms_0139 | 139 | 60e4hdCi1D4 | 100 | 572.73 | 576.72 | true | 546 | that I put up here.
Concretely, how do I do it here? Well, my function f was given
as one minus x squared minus y squared.
And I would like to switch that to polar coordinates.
I want to put r and theta in there.
Well, I have formulas for x and y in polar coordinates so I
could just replace x squared by r squared cosin... | r squared cosine squared theta, y squared by | And that works just fine. | But maybe you can observe that
this is x squared plus y squared.
It is just the square of a distance from the origin,
so that is just r squared. That is a useful thing.
You don't strictly need it, but it is much faster if you
see this right away. It saves you writing down a
sine and a cosine. Now we just end up with th... |
ms_0140 | 140 | 60e4hdCi1D4 | 100 | 608.83 | 619.86 | true | 577 | But maybe you can observe that
this is x squared plus y squared.
It is just the square of a distance from the origin,
so that is just r squared. That is a useful thing.
You don't strictly need it, but it is much faster if you
see this right away. It saves you writing down a
sine and a cosine. Now we just end up with | Now we just end up with | Now, if I want to compute this | integral, so let's first do the
inner integral. If I integrate r minus r cubed,
I will get r squared over two minus r squared over four
between zero and one. And then I will integrate d
theta. What is this equal to?
Well, for r equals one you get one-half minus one-quarter,
which is going to be just one-quarter.
And wh... |
ms_0141 | 141 | 60e4hdCi1D4 | 100 | 630.11 | 633.65 | true | 607 | Now we just end up with the
integral from zero to pi over two, integral from zero to one
of one minus r squared r dr d theta.
Now, if I want to compute this integral, so let's first do the
inner integral. If I integrate | If I integrate | I will get r squared over two | minus r squared over four
between zero and one. And then I will integrate d
theta. What is this equal to?
Well, for r equals one you get one-half minus one-quarter,
which is going to be just one-quarter.
And when you plug in zero you get zero.
So, it is the integral from zero to pi over two of
one-quarter d theta. And ... |
ms_0873 | 873 | 60e4hdCi1D4 | 100 | 630.11 | 633.65 | true | 607 | Now we just end up with the
integral from zero to pi over two, integral from zero to one
of one minus r squared r dr d theta.
Now, if I want to compute this integral, so let's first do the
inner integral. If I integrate | If I integrate | I will get r squared over two | minus r squared over four
between zero and one. And then I will integrate d
theta. What is this equal to?
Well, for r equals one you get one-half minus one-quarter,
which is going to be just one-quarter.
And when you plug in zero you get zero.
So, it is the integral from zero to pi over two of
one-quarter d theta. And ... |
ms_0144 | 144 | 60e4hdCi1D4 | 100 | 2,133.55 | 2,138.44 | true | 2,102 | energy now?
Well, first we have to find out what the speed is.
What is the speed? Well,
if we are going on a circle of radius r at angular velocity
omega that means that in unit time we rotate by omega and we
go by a distance of r times omega.
The actual speed is the radius times angular velocity.
And so the kinetic en... | one-half mv squared, which is | And so, | by similarity with that
formula, the coefficient of v squared is
the mass, and here we will say the
coefficient of omega squared, so this thing is the moment of
inertia. That is how we define moment of
inertia. |
ms_0146 | 146 | 60e4hdCi1D4 | 100 | 2,731.57 | 2,738.22 | true | 2,696 | The part of this ray that lives
inside the disk is always from zero to a.
And theta goes from, well, zero to 2 pi for example.
And now you can compute this integral.
Well, I will let you figure it out.
But the inner integral becomes a to the four over four and the
outer multiplies things by 2pi, so you get | so you get | OK.
That is how hard it is to spin this disk.
Now, what about instead of spinning it about the center we
decided to spin it about a point on a second point.
For example, think of a Frisbee. A Frisbee has this rim so you
can actually try to make it rotate around the point on the
circumference by holding it near the rim ... | |
ms_0876 | 876 | 60e4hdCi1D4 | 85 | 2,731.57 | 2,738.22 | true | 2,696 | The part of this ray that lives
inside the disk is always from zero to a.
And theta goes from, well, zero to 2 pi for example.
And now you can compute this integral.
Well, I will let you figure it out.
But the inner integral becomes a to the four over four and the
outer multiplies things by 2pi, so you get | so you get | OK.
That is how hard it is to spin this disk.
Now, what about instead of spinning it about the center we
decided to spin it about a point on a second point.
For example, think of a Frisbee. A Frisbee has this rim so you
can actually try to make it rotate around the point on the
circumference by holding it near the rim ... | |
ms_0142 | 142 | 60e4hdCi1D4 | 100 | 3,023.55 | 3,026.15 | true | 2,992 | all the directions in the right
half of a plane. I mean, of course,
if I shoot very close to the axis, you might think,
oh, I won't be in there. But, actually,
that is not true because here the circle is tangent to the
axis. No matter which direction I
take, I will still have a little tiny piece.
The angle actually goe... | well, the inner integral will be | between zero and 2a cosine
theta, which will turn out to be 4a to
the four cosine to the four theta.
And now you will integrate that for minus pi over two to pi over
two. And that is,
again, the evil integral that we had yesterday.
Either we remember the method from yesterday or we remember
from yesterday that actually... | |
ms_0147 | 147 | 60e4hdCi1D4 | 88.2 | 3,029.76 | 3,034.95 | true | 2,998 | axis, you might think,
oh, I won't be in there. But, actually,
that is not true because here the circle is tangent to the
axis. No matter which direction I
take, I will still have a little tiny piece.
The angle actually goes from minus pi over two to pi over
two. If you compute that you will
get, well, the inner integr... | which will turn out to be | And now you will integrate that | for minus pi over two to pi over
two. And that is,
again, the evil integral that we had yesterday.
Either we remember the method from yesterday or we remember
from yesterday that actually there are formulas in the notes
to help you. On homework,
you can use these formulas. In the notes at the beginning
of section 3b th... |
ms_0878 | 878 | 60e4hdCi1D4 | 88.9 | 3,029.76 | 3,034.95 | true | 2,998 | axis, you might think,
oh, I won't be in there. But, actually,
that is not true because here the circle is tangent to the
axis. No matter which direction I
take, I will still have a little tiny piece.
The angle actually goes from minus pi over two to pi over
two. If you compute that you will
get, well, the inner integr... | which will turn out to be | And now you will integrate that | for minus pi over two to pi over
two. And that is,
again, the evil integral that we had yesterday.
Either we remember the method from yesterday or we remember
from yesterday that actually there are formulas in the notes
to help you. On homework,
you can use these formulas. In the notes at the beginning
of section 3b th... |
ms_1015 | 1,015 | 76WdBlGpxVw | 100 | 150.6 | 155.6 | true | 122.61 | is a first-order
differential equation. And so we group them together
on the right-hand side with constant c. So from this point, given that
we're interested in variable y, we need just to
invert the expression. And that gives us
partial answer, which is | which is | So now we need to use our
initial condition, y of zero equals to 1, to
determine the value of c for this particular
initial value problem. So our initial condition
was y of zero equals 1. So if we substitute
this in the expression that we just
obtained, we just have zero plus c, which then
only gives us c equal to 1. | |
ms_1016 | 1,016 | 76WdBlGpxVw | 100 | 206.76 | 211.13 | true | 177.63 | that we just
obtained, we just have zero plus c, which then
only gives us c equal to 1. So we end up with the value for
our constant of integration, c equals minus 1. And so the solution
to this problem is | So if you examine
this expression, you see right away that
we have a problem for x equals to 1 because
at x equals to 1, we have 1 over 0 which means
that, then, the solution blows up and we have a
vertical asymptote. So let me draw this here. So we're going to have
an asymptote at x equals 1 and a solution that passes... | ||
ms_0091 | 91 | 7K1sB05pE0A | 86.3 | 1,426.14 | 1,432.68 | true | 1,398.64 | this limiting process. So the formula here is we
have basically two numbers. So in other words, why is
it that this expression, when delta x tends to 0,
is equal to -1 / x_0^2 ? Let me illustrate it by
sticking in a number for x_0 to make it more explicit. All right, so for
instance, let me stick in here for x_0 the nu... | Then it's | That's the situation
that we've got. And now the question
is what happens as this number gets smaller
and smaller and smaller, and gets to be practically 0? Well, literally what we can
do is just plug in 0 there, and you get 3 plus 0 times
3 in the denominator. -1 in the numerator. So this tends to
-1/9 (over 3^2). And... | |
ms_0797 | 797 | 7eZVshlT33Q | 100 | 119.35 | 125.31 | true | 86 | And, just to motivate that,
let me remind you about one trick that you probably know
from single variable calculus, namely implicit
differentiation. Let's say that you have a
function y equals f of x then you would sometimes write | you would sometimes write | And then maybe you would -- We
use implicit differentiation to actually relate infinitesimal
changes in y with infinitesimal changes in x.
And one thing we can do with that, for example,
is actually figure out the rate | |
ms_0798 | 798 | 7eZVshlT33Q | 100 | 201.24 | 208.23 | true | 168 | let's say that we have y equals
inverse sin(x). Then we can write x equals
sin(y). And, from there,
we can actually find out what is the derivative of this
function if we didn't know the answer already by writing dx
equals cosine y dy. That tells us that | That tells us that | And now cosine for relation to | sine is basically one over
square root of one minus x^2. And that is how you find the
formula for the derivative of the inverse sine function.
A formula that you probably already knew,
but that is one way to derive it.
Now we are going to use also these kinds of notations,
dx, dy and so on, but use them for functions o... |
ms_0799 | 799 | 7eZVshlT33Q | 90.3 | 213.29 | 228.66 | true | 183 | And, from there,
we can actually find out what is the derivative of this
function if we didn't know the answer already by writing dx
equals cosine y dy. That tells us that dy over dx
is going to be one over cosine y.
And now cosine for relation to sine is basically | sine is basically | And that is how you find the
formula for the derivative of the inverse sine function.
A formula that you probably already knew,
but that is one way to derive it.
Now we are going to use also these kinds of notations,
dx, dy and so on, but use them for functions of
several variables. And, of course,
we will have to lear... | |
ms_0800 | 800 | 7eZVshlT33Q | 100 | 284.53 | 299.31 | true | 257 | The actual name of that is the
total differential, as opposed to the partial
derivatives. The total differential includes
all of the various causes that can change -- Sorry.
All the contributions that can cause the value of your function
f to change. Namely, let's say that you have
a function maybe of three variables, ... | then you would write | Maybe, just to remind you of | the other notation,
partial f over partial x dx plus partial f over partial y dy
plus partial f over partial z dz.
Now, what is this object? What are the things on either
side of this equality? Well, they are called
differentials. And they are not numbers,
they are not vectors, they are not matrices,
they are a differe... |
ms_0801 | 801 | 7eZVshlT33Q | 95.1 | 301.5 | 313.12 | true | 273 | cause the value of your function
f to change. Namely, let's say that you have
a function maybe of three variables, x,
y, z, then you would write df equals
f sub x dx plus f sub y dy plus f sub z dz.
Maybe, just to remind you of the other notation, | the other notation, | Now, what is this object? | What are the things on either
side of this equality? Well, they are called
differentials. And they are not numbers,
they are not vectors, they are not matrices,
they are a different kind of object.
These things have their own rules of manipulations,
and we have to learn what we can do with them.
So how do we think abou... |
ms_0803 | 803 | 7eZVshlT33Q | 90.1 | 642.82 | 656.41 | true | 621 | get infinitesimal rate of
change. Well, let me just say rate of
change. | And that corresponds to the | situation where x is a function
of t, y is a function of t and z is a function of t.
That means you can plug in these values into f to get,
well, the value of f will depend on t,
and then you can find the rate of change with t of a value of
f. These are the basic rules.
And this is known as the chain | |
ms_0804 | 804 | 7eZVshlT33Q | 100 | 847.6 | 858.03 | true | 824 | Why is this valid?
How can I get to this? Here is a first attempt of
justifying how to get there. Let's see. Well, we said | Let's see. Well, we said | But we know if x is a function | of t then dx is x prime of t dt,
dy is y prime of t dt, dz is z prime of t dt.
If we plug these into that formula, we will get that df is
f sub x times x prime t dt plus |
ms_0805 | 805 | 7eZVshlT33Q | 89.7 | 891.82 | 897.1 | true | 865 | of t then dx is x prime of t dt,
dy is y prime of t dt, dz is z prime of t dt.
If we plug these into that formula, we will get that df is | formula, we will get that df is | plus | f sub y y prime of t dt plus f
sub z z prime of t dt. And now I have a relation
between df and dt. See, I got df equals sometimes
times dt. That means the rate of change
of f with respect to t should be that coefficient.
If I divide by dt then I get |
ms_0806 | 806 | 7eZVshlT33Q | 100 | 899.23 | 907.36 | true | 877 | dz is z prime of t dt.
If we plug these into that formula, we will get that df is
f sub x times x prime t dt plus f sub y y prime of t dt plus | f sub y y prime of t dt plus | And now I have a relation
between df and dt. See, I got df equals sometimes
times dt. That means the rate of change
of f with respect to t should be that coefficient.
If I divide by dt then I get the chain rule.
That kind of works, | |
ms_0808 | 808 | 7eZVshlT33Q | 96.2 | 1,327.58 | 1,335.71 | true | 1,300 | that dw/dt is,
we start with partial w over partial x, well,
what is that? That is 2xy,
and maybe I should point out that this is w sub x,
times dx over dt plus -- Well, | plus w sub z, | which is going to be just one,
dz over dt. And so now let's plug in the
actual values of these things. x is t and y is e^t,
so that will be 2t e to the t, dx over dt is one plus x
squared is t squared, dy over dt is e over t,
plus dz over dt is cosine t. | |
ms_0809 | 809 | 7eZVshlT33Q | 93 | 1,380.26 | 1,387.71 | true | 1,353 | x is t and y is e^t,
so that will be 2t e to the t, dx over dt is one plus x
squared is t squared, dy over dt is e over t,
plus dz over dt is cosine t. At the end of calculation | At the end of calculation | That is what the chain rule | tells us.
How else could we find that? Well, we could just plug in
values of x, y and z, x plus w is a function of t,
and take its derivative. Let's do that just for
verification. It should be exactly the same
answer. And, in fact,
in this case, the two calculations are
roughly equal in complication. But say that your ... |
ms_0811 | 811 | 7eZVshlT33Q | 96.6 | 1,501.49 | 1,506.67 | true | 1,476 | y is e to the t,
plus z was sine t. dw over dt, we know how to take
the derivative using single variable calculus.
Well, we should know. If we don't know then we should
take a look at 18.01 again. The product rule that will be
derivative of t squared is 2t times e to the t plus | times e to the t plus | plus cosine t. And that is the same answer as | over there.
I ended up writing, you know, maybe I wrote
slightly more here, but actually the amount of
calculations really was pretty much the same.
Any questions about that? Yes?
What kind of object is w? Well, you can think of w as
just another variable that is given as a function of x,
y and z, for example. |
ms_0812 | 812 | 7eZVshlT33Q | 94.4 | 1,788.81 | 1,793.42 | true | 1,761 | Right now I am thinking of it
as a function of two variables, u and v.
U and v themselves are actually going to be functions of t.
Then, well, dg over dt is going to be partial g,
partial u. How much is that?
How much is partial g, partial u? | partial u? | plus -- Well,
next we need to have partial g over partial v.
Well, what is the derivative of this with respect to v?
Here we need to know how to differentiate the inverse.
It is minus u over v squared times dv over dt.
And that is actually the usual quotient rule just written in a
slightly different way. | |
ms_0813 | 813 | 7eZVshlT33Q | 96.2 | 1,806.45 | 1,815.45 | true | 1,779 | to be partial g,
partial u. How much is that?
How much is partial g, partial u?
One over v times du over dt plus -- Well,
next we need to have partial g over partial v.
Well, what is the derivative of this with respect to v?
Here we need to know how to differentiate the inverse. It is | differentiate the inverse. It is | And that is actually the usual | quotient rule just written in a
slightly different way. I mean, just in case you really
want to see it, if you clear denominators for v
squared then you will see basically u prime times v minus
v prime times u. |
ms_0814 | 814 | 7eZVshlT33Q | 100 | 2,179.5 | 2,185.95 | true | 2,150 | that I change u a little bit,
how does w change? Of course, what happens,
if I change u a little bit, is y and y will change.
How do they change? Well, that is given to me by
the differential. dx is going to be,
well, I can use the differential again.
Well, x is a function of u and v. That will be | v. That will be | That is, again, | taking the differential of a
function of two variables. Does that make sense?
And then we have the other guy, f sub y times,
what is dy? Well, similarly dy is y sub u
du plus y sub v dv. And now we have a relation
between dw and du and dv. We are expressing how w reacts
to changes in u and v, |
ms_0815 | 815 | 7eZVshlT33Q | 100 | 2,199.35 | 2,207.35 | true | 2,173 | differential again.
Well, x is a function of u and v.
That will be x sub u times du plus x sub v times dv.
That is, again, taking the differential of a
function of two variables. Does that make sense?
And then we have the other guy, f sub y times,
what is dy? Well, similarly | Well, similarly | And now we have a relation
between dw and du and dv. We are expressing how w reacts
to changes in u and v, which was our goal.
Now, let's actually collect terms so that we see it a bit
better. It is going to be f sub x times
x sub u times f sub y times y sub u du plus f sub x,
x sub v plus f sub y y sub v | |
ms_0816 | 816 | 7eZVshlT33Q | 90.2 | 2,229.35 | 2,236.55 | true | 2,199 | Well, similarly dy is y sub u
du plus y sub v dv. And now we have a relation
between dw and du and dv. We are expressing how w reacts
to changes in u and v, which was our goal.
Now, let's actually collect terms so that we see it a bit
better. It is going to be | It is going to be | du plus f sub x, x sub v plus f sub y y sub v | dv.
Now we have dw equals something du plus something dv.
Well, the coefficient here has to be partial f over partial u.
What else could it be? That's the rate of change of w
with respect to u if I forget what happens when I change v.
That is the definition of a partial.
Similarly, this one has to be partial f over par... |
ms_0817 | 817 | 7eZVshlT33Q | 100 | 2,930.75 | 2,941.37 | true | 2,909 | Then you can ask yourself,
well, what is partial f over partial r?
And that is going to be, well, you want to take partial
f over partial x times partial x partial r plus partial f over
partial y times partial y over partial r.
That will end up being actually | And you can do the same thing
to find partial f, partial theta.
And so you can express derivatives either in terms of
x, y or in terms of r and theta with simple relations between
them. And the one last thing I should
say. On Thursday we will learn about
more tricks we can play with variations of functions.
And one tha... | ||
ms_0084 | 84 | 8gGbViZjoRw | 92 | 39.14 | 41.78 | true | 8.67 | In lecture you've been talking
about implicitly defined functions and implicit
differentiation. So one of the reasons that
these are important is-- or that implicit
differentiation is important, is that sometimes you have a
function to find implicitly and you can't solve for it. You don't have any
algebraic method for ... | by the equation that | quantity times | e to the w of x is
equal to x for all x. So this function, some of
its values you can guess. Like at x equals 0,
the function value is going to be negative 1. And the reason is that
this can't ever be 0, so the only way to
get this side to be 0 is if w is negative
1 if this term is 0. So some of its values
are easy to ... |
ms_0088 | 88 | 8gGbViZjoRw | 86.1 | 198.4 | 203.25 | true | 160.29 | what we need to know are:
we need to know a base point and we need to know the
derivative of the function at that base point. And those are the
two pieces of data you need in order to construct
a linear approximation. So we have a good
candidate for a base point here, which is the point (1, 0). So this curve,
whatever ... | w of x is approximately equal to w prime of | plus w of 1 when x is
approximately equal to 1. So this is the
linear approximation we're going to use, and we
have that w of 1 here is 0. So this is, this is equal to w
prime of one times x minus one. Just, the w of 1 is 0. It just goes away. So in order to estimate w of
x, and in particular w of 3/2, | |
ms_0085 | 85 | 8gGbViZjoRw | 100 | 385.06 | 394.88 | true | 350.89 | it's only involved in the
equation in a very simple way. So there's it multiplied by
functions of x and w of x, but not-- you know, it's just
multiplied by something that doesn't involve w prime at all. And then here it's
multiplied by something that doesn't involve w prime at all. So you can just collect your
w prime'... | is w prime of x times-- looks like | Did I get that right? Looks good. OK, so that's still equal to 1. So that means that w
prime of x is just-- well, just, you know-- it's equal
to 1 over w of x plus 2 times e to the w of x. OK, so this is true for every x. But I don't need this
equation for every x. I just need the particular
value of w prime at 1. | |
ms_0086 | 86 | 8gGbViZjoRw | 100 | 408 | 421.5 | true | 379.19 | is w prime of x times-- looks
like w of x plus 2 times e to the w of x. Did I get that right? Looks good. OK, so that's still equal to 1. So that means that w
prime of x is just-- well, just, you know-- it's equal to | just, you know-- it's equal to | OK, so this is true for every x. But I don't need this
equation for every x. I just need the particular
value of w prime at 1. So that's, so I'm going to
take this equation, then, and I'm just going
to put in x equals 1. So I put in x equals 1--
well, let me do it over here-- so I get w prime of 1. And I just, everywhe... | |
ms_0087 | 87 | 8gGbViZjoRw | 87 | 443.09 | 457.02 | true | 416.26 | e to the w of x. OK, so this is true for every x. But I don't need this
equation for every x. I just need the particular
value of w prime at 1. So that's, so I'm going to
take this equation, then, and I'm just going
to put in x equals 1. So I put in x equals 1--
well, let me do it over here-- so I get w prime of 1. And... | So this is | OK. So in order to get w prime of 1,
I need to know what w of 1 is. But I had that. I had it, it was
right back here. There was the-- that
was my hint to you. Right, this is why
we're using this point as a base point, which
is we know the value of w for this value of x. So we take that value. So w of 1 is 0. So this is... |
FORM in-discourse spoken mathematics
The spoken mathematical expressions of the MathSpeech benchmark, located back in the MIT OpenCourseWare lectures they were cut from, with time stamps and the lecture's caption text before and after each expression, from the thesis FORM: Form-tolerant Outcomes of Recognition for Multi-form Items (Kim, Emory University, 2026). A spoken expression can be written in words ("x squared") or in notation ("x^2"); the thesis scores whether it was recognized in any form and which form was written, with and without the surrounding lecture as context.
No audio is included. The clips are defined by lecture video id and time stamps; SOURCES.md links every lecture. Code: https://github.com/olivia-shin-kim/form-asr.
Loading
from datasets import load_dataset
clips = load_dataset("olivia-shin-kim/form-indiscourse-math", "discourse_clips", split="test")
items = load_dataset("olivia-shin-kim/form-indiscourse-math", "items", split="test")
Source data
- MathSpeech (Hyeon et al., 2025), revision
2e62ef9b0b97604a7fca1599cedec2514fa436e8: 1,101 expression clips from 89 MIT OpenCourseWare lectures. Rows refer to MathSpeech items byidx(item_id=ms_+ four-digitidx). - MIT OpenCourseWare lectures and their English caption tracks: 387 of the 1,101 expressions were located in their lectures; the 317 whose alignment scored at least 85 out of 100 after a manual alignment check form the in-discourse set, from 69 lectures.
Configurations
All configurations have one split, test.
| Configuration | Rows | Content |
|---|---|---|
discourse_clips (default) |
317 | The in-discourse set: lecture, expression time span, caption text before and after. |
items |
1,101 | Every MathSpeech item: lecture, form and expression category, token counts, whether it is in the located set. |
comparison_words |
4,072 | Ordinary words of the caption text before each in-discourse expression, with covariates. |
dominant_forms |
4 x 5 | Per recognizer and form category, whether the words side or the notation side is written more often without a prompt. |
number_first_items |
267 | Items whose first form-deciding token is a number. |
disputed_references |
18 | Items where the alignment check heard something other than MathSpeech's reference at the located time. |
prompts |
9 | The preceding-text prompts. |
prompt_frames |
7 | How each recognizer receives a prompt. |
Fields
Clips. sample_id (= item_id), original_index (MathSpeech idx), video_id (YouTube id of the lecture), match_score
(alignment score of the caption match, 0 to 100), math_start and math_end (seconds into the lecture), realigned (whether a
forced alignment moved the span), context_before_start (seconds), context_before (caption text before the expression),
lead_in (words of the expression's own caption line before it), lead_out, context_after.
Items. item_id, utt_id, idx, video_id, n_tokens (tokens of the canonical key), in_discourse (located in its lecture;
387 items), form_category, expression_category, latex_tokens (tokens of MathSpeech's LaTeX), grammar_version. The
transcript and the canonical keys are left out (see License); rebuild_labels.py restores them.
Comparison words. utt_id, word, index (position in the context text), est_start (estimated time, seconds), pos
(spaCy), lemma, log_freq (Zipf), freq_oov, n_syll, n_phones, n_phones_missing, n_words, n_bpe_whisper.
Dominant forms. category (form category), recognizer_id, n_word_side, n_symbol_side, deciding, dominant (words or notation),
fallback, fallback_reason. Greek letters and function names decide no form, so their dominant is empty.
Number-first items. utt_id, item_id, form_category, expression_category, video_id.
Disputed references. item_id, note (the annotator's note, when one was recorded). All 18 lie outside the in-discourse set.
Prompts. prompt_id, text, form (words; notation; digits_operators_in_words; number_words_symbol_operators;
none: no content words), matched_to (the words-form prompt it is matched to). Expressions in the prompts are generic and share
no canonical key with a benchmark item. Prompt frames. recognizer_id, slot, frame.
Recognizer ids: whisper openai/whisper-large-v3 (whisper_base, whisper_small, whisper_large_v2 in the frames are the other
Whisper checkpoints), owsm espnet/owsm_v4_medium_1B, qwen3asr Qwen/Qwen3-ASR-1.7B, raon KRAFTON/Raon-Speech-9B.
How the set was made
Each benchmark expression was matched to the English caption track of its lecture, its time span refined by forced alignment, and the match checked by an annotator on a stratified sample; clips scoring below 85 were dropped after that check. Context text is the caption text up to the word before the expression. Comparison words are the content words of that context that fall inside the 30-second audio window before the expression, at least two seconds after the window opens, and are neither mathematical terms nor words of the item.
Intended use and limitations
For evaluating speech recognition of spoken mathematics in context, with a form-tolerant score. The lectures come from one institution's mathematics courses, mostly single-variable and multivariable calculus and differential equations; 70 of the 387 located expressions were dropped for weak alignment. Non-commercial use only (see License).
License and attribution
The lectures are MIT OpenCourseWare course videos by MIT faculty, published at https://ocw.mit.edu and on the MIT OpenCourseWare
YouTube channel under Creative Commons BY-NC-SA 4.0 (https://creativecommons.org/licenses/by-nc-sa/4.0/); SOURCES.md lists
each lecture with its title and link. Changes: the caption text was excerpted around each expression and aligned to it in time;
no audio or video is included. This dataset is released under the same license (non-commercial use, share alike). MIT
OpenCourseWare does not endorse this dataset or its use.
MathSpeech's release states no license, so its transcripts and LaTeX are not redistributed, nor anything computed from them beyond
categories and counts. rebuild_labels.py restores the transcript and the canonical keys of accept_sets.v1.jsonl from
MathSpeech's release with the grammar of the code repository and checks the result against
accept_sets.v1.jsonl.original.sha256. The caption text can contain the lecturers' wording of other benchmark expressions, as
captioned by MIT OpenCourseWare.
Comparison-word frequencies are from wordfreq 3.1.1 (Speer; data CC BY-SA 4.0); part-of-speech tags from spaCy.
Citation
Please cite the thesis and MathSpeech, and credit MIT OpenCourseWare.
@mastersthesis{kim2026form,
author = {Kim, Olivia S.},
title = {{FORM}: Form-tolerant Outcomes of Recognition for Multi-form Items},
school = {Emory University},
year = {2026}
}
@inproceedings{hyeon2025mathspeech,
title = {{MathSpeech}: Leveraging Small {LM}s for Accurate Conversion in Mathematical Speech-to-Formula},
author = {Hyeon, Sieun and Jung, Kyudan and Won, Jaehee and Kim, Nam-Joon and Ryu, Hyun Gon and Lee, Hyuk-Jae and Do, Jaeyoung},
booktitle = {Proceedings of the AAAI Conference on Artificial Intelligence},
volume = {39},
pages = {24194--24202},
year = {2025},
doi = {10.1609/aaai.v39i23.34595}
}
- Downloads last month
- 52