Dataset Viewer
Auto-converted to Parquet Duplicate
id
stringlengths
3
5
domain
stringclasses
4 values
model
stringclasses
1 value
messages
listlengths
2
6
q1s
physics
kimi-k3
[ { "role": "user", "content": "I'm checking a small aluminum cantilever for a sensor mount. It is 350 mm long, 25 mm wide and 4 mm thick, with the 4 mm dimension in the bending direction. A downward 18 N load acts at the free end. Using E = 69 GPa, estimate the maximum bending stress and tip deflection, then...
q2s
physics
kimi-k3
[ { "role": "user", "content": "A solid cylinder starts from rest and rolls down a 20° incline. The coefficient of static friction is 0.20. Will it roll without slipping, and what acceleration should I expect? Please show how the friction force enters the equations rather than treating it as an energy loss." ...
q3s
physics
kimi-k3
[ { "role": "user", "content": "I'm building a small Atwood machine: masses of 2.4 kg and 1.6 kg are connected by a light string over a pulley with radius 80 mm and moment of inertia 0.012 kg m². The axle has a constant resisting torque of 0.035 N m. Find the acceleration and string tensions, including the pu...
q4s
physics
kimi-k3
[ { "role": "user", "content": "A water pump sends 0.012 m³/s through 35 m of straight steel pipe with an internal diameter of 80 mm. The water is at 20°C, and the pipe has an absolute roughness of 0.045 mm. Estimate the frictional pressure drop with Darcy-Weisbach, explain how you choose the friction factor,...
q5s
physics
kimi-k3
[ { "role": "user", "content": "A frictionless piston-cylinder contains 0.40 mol of ideal diatomic gas at 300 K and 150 kPa. It expands quasi-statically to twice its initial volume following pV^1.3 = constant. I need the final temperature, boundary work, and heat transfer. Can you derive them from the process...
q6s
physics
kimi-k3
[ { "role": "user", "content": "For a pair of spin-1/2 particles in the singlet state, I understand that measuring one particle along the z-axis fixes the other result. What changes if the second detector is rotated by an angle θ, and how do the joint probabilities depend on θ? I'm trying to connect the state...
q7s
physics
kimi-k3
[ { "role": "user", "content": "In a two-qubit Grover search, I start in the equal superposition of all four basis states and mark |10⟩. Work through the oracle and diffusion operator once, give the final amplitudes, and calculate the probability of measuring the marked state. How does that compare with simpl...
q8s
physics
kimi-k3
[ { "role": "user", "content": "I'm analyzing a series RLC circuit after a 12 V DC step is applied at t = 0. The components are R = 20 Ω, L = 0.20 H and C = 100 μF, with zero initial capacitor voltage and inductor current. Derive the current response and identify the damping regime, damped frequency and peak-...
q9s
physics
kimi-k3
[ { "role": "user", "content": "A bead of mass m slides without friction on a circular hoop of radius R. The hoop rotates at constant angular speed Ω about its vertical diameter. Starting from the Lagrangian, find the equilibrium angles and determine their stability as Ω varies. I'm especially unsure how the ...
q10s
math
kimi-k3
[ { "role": "user", "content": "I'm differentiating the curve x² + xy + y² = 7 implicitly. Find dy/dx and the equation of the tangent at (1, 2). Then explain why differentiating y as though it were independent of x gives the wrong slope." }, { "role": "assistant", "content": "<think>\nWe need to: ...
q11s
math
kimi-k3
[ { "role": "user", "content": "Can you evaluate the improper integral ∫₀^∞ x/(1 + x⁴) dx? I can see that it converges, but I'm not sure which substitution turns it into a standard integral, and I would like the convergence and value justified." }, { "role": "assistant", "content": "<think>\n- Let...
q12s
math
kimi-k3
[ { "role": "user", "content": "I need to solve (x - 1)/(x + 2) ≥ 2/(x - 3) over the real numbers. I keep getting a different answer depending on which side I move first. Can you handle the domain restrictions and sign changes carefully and give the solution as intervals?" }, { "role": "assistant", ...
q13s
math
kimi-k3
[ { "role": "user", "content": "For which real values of k does x² - (k + 3)x + 2k = 0 have two distinct real roots that are both greater than 1? I'd like to solve it using the discriminant and Vieta's relations rather than plugging in trial values." }, { "role": "assistant", "content": "<think>\n...
q14s
math
kimi-k3
[ { "role": "user", "content": "A rectangle is placed symmetrically under the parabola y = 12 - x², with its base on the x-axis and its upper corners on the curve. What dimensions give the largest possible area? Set up the one-variable optimization and explain why the critical point is the global maximum." ...
q15s
math
kimi-k3
[ { "role": "user", "content": "Evaluate ∬_D (3x - y) dA, where D is bounded by y = x² and y = 2x. I can integrate in Cartesian coordinates, but could you also describe the region clearly and show how the limits follow from the intersections?" }, { "role": "assistant", "content": "<think>\n1. Find...
q16s
math
kimi-k3
[ { "role": "user", "content": "A thin plate has temperature T(x,y) = 100 - 3x² - 2xy - 4y² °C. At (1, -1), in which direction does temperature increase most rapidly, and what is the directional derivative toward the point (5, 2)? Please keep the direction vector normalized." }, { "role": "assistant",...
q17s
math
kimi-k3
[ { "role": "user", "content": "I need an antiderivative for ∫ x²e^(3x) dx. Can you show a systematic integration-by-parts setup, check the result by differentiating it, and explain how you decide which factor to differentiate each time?" }, { "role": "assistant", "content": "<think>\n1. The integ...
q18s
math
kimi-k3
[ { "role": "user", "content": "Solve the system 2x + 3y = 7 and x² + y² = 13 over the reals. I want all intersection points and a check that no roots were introduced or lost when you substitute the linear equation into the quadratic." }, { "role": "assistant", "content": "<think>I need to solve t...
q19s
chemistry
kimi-k3
[ { "role": "user", "content": "I'm preparing aspirin from 3.00 g of salicylic acid and 5.00 mL of acetic anhydride (density 1.08 g/mL), using a few drops of acid catalyst. Calculate the limiting reagent and theoretical aspirin yield, then explain the reaction mechanism at a useful undergraduate level and why...
q21s
chemistry
kimi-k3
[ { "role": "user", "content": "For a copper sulfate crystallization, I have 5.00 g of CuO and 50.0 mL of 1.00 M H₂SO₄. Assuming the product is CuSO₄·5H₂O, calculate the limiting reagent and theoretical crystal mass. How should excess solid be handled before crystallization, and why does cooling rate affect c...
q22s
chemistry
kimi-k3
[ { "role": "user", "content": "I'm trying to prepare tetraamminecopper(II) sulfate monohydrate crystals from copper(II) sulfate pentahydrate and aqueous ammonia. Explain the ligand-substitution chemistry, work out the minimum stoichiometric ammonia requirement per mole of copper, and describe the main factor...
q23s
chemistry
kimi-k3
[ { "role": "user", "content": "A 25.00 mL sample of diprotic acid H₂A is titrated with 0.1000 M NaOH. The first and second equivalence points occur at 18.60 mL and 37.20 mL. Explain how the two pKa values relate to the titration curve, determine the formal acid concentration, and describe which species domin...
q25s
logic
kimi-k3
[ { "role": "user", "content": "A university says: 'Every student who completed the laboratory safety course passed the practical exam. Some students who passed the practical exam did not complete the course.' Does that tell me whether completing the course is necessary, sufficient, both, or neither for passi...
q26s
logic
kimi-k3
[ { "role": "user", "content": "A screening test is 98% sensitive and 95% specific. The condition affects 1 in 2,000 people in the population being screened. If someone tests positive, how should I calculate the probability that they actually have the condition? I'm seeing people quote the 98% figure as the a...
q27s
logic
kimi-k3
[ { "role": "user", "content": "A company reports that its new training program raised the pass rate from 70% to 85%. After I split the data by department, the pass rate is lower in every department that used the program. Can both summaries be correct? Construct a small numerical example and explain the mecha...
q31s
physics
kimi-k3
[ { "role": "user", "content": "I'm checking a steel shaft that transmits 7.5 kW at 1,450 rpm. The shaft is 32 mm in diameter and has a keyway. Estimate the nominal maximum torsional shear stress, explain how the keyway changes the design check, and determine what additional fatigue information you'd need bef...
q32s
physics
kimi-k3
[ { "role": "user", "content": "A 1.2 kg slider is attached to a spring of stiffness 850 N/m and moves on a guide with viscous damping. A measured free response falls from 42 mm amplitude to 19 mm over three cycles. Estimate the damping ratio and damped natural frequency, then infer the damping coefficient." ...
q33s
physics
kimi-k3
[ { "role": "user", "content": "A two-stage gear train has a 16-tooth pinion driving a 64-tooth gear, followed by a 20-tooth pinion driving a 75-tooth output gear. The input runs at 1,800 rpm and supplies 4.0 kW. Work out the output speed and ideal output torque, and explain how you'd account for realistic ge...
q34s
physics
kimi-k3
[ { "role": "user", "content": "A 2.0 m simply supported aluminum beam carries a 1.5 kN point load at 0.7 m from the left support and a uniformly distributed load of 0.8 kN/m over its full span. Find the support reactions, maximum bending moment and location, then estimate the maximum deflection using E = 69 ...
q35s
physics
kimi-k3
[ { "role": "user", "content": "I'm sizing a centrifugal pump for water at 20°C. It draws from a tank whose free surface is 3.2 m below the pump centerline, through a 6 m suction line with two elbows and a strainer. The flow is 0.010 m³/s through a 75 mm pipe. How would you calculate NPSH available and decide...
q36s
physics
kimi-k3
[ { "role": "user", "content": "A piston-cylinder contains 0.8 kg of air at 500 kPa and 450 K. It is cooled at constant pressure until its volume is halved, then heated at constant volume until it returns to 450 K. Treat air as an ideal gas with constant specific heats and calculate the net work and heat tran...
q37s
physics
kimi-k3
[ { "role": "user", "content": "A copper rod 0.8 m long and 12 mm in diameter connects a 180°C surface to a 25°C ambient environment. Its lateral surface loses heat by convection with h = 18 W m⁻² K⁻¹. Estimate the heat loss using the fin equation, compare it with the infinite-fin approximation, and explain w...
q38s
physics
kimi-k3
[ { "role": "user", "content": "A car travels at 22 m/s around a banked curve of radius 95 m. The road is banked at 12°. Calculate the lateral friction required per unit normal force and determine whether the tires must provide friction up the slope or down it. Then find the speed at which no lateral friction...
q39s
physics
kimi-k3
[ { "role": "user", "content": "A flywheel with moment of inertia 0.42 kg m² is spinning at 3,000 rpm. A brake applies a torque that rises linearly from 0 to 18 N m over 2 seconds and then remains constant. Find the time to stop and the total angular displacement during braking." }, { "role": "assista...
q40s
physics
kimi-k3
[ { "role": "user", "content": "I'm designing a non-inverting op-amp stage for a strain-gauge signal. The bridge output ranges from 0 to 18 mV, and I need 0 to 3.3 V at the ADC. With a 3.3 V single supply, what gain should I choose, and what input common-mode, output-swing, offset, and bandwidth limits should...
q41s
physics
kimi-k3
[ { "role": "user", "content": "A 24 V brushed DC motor has armature resistance 0.6 Ω and back-emf constant 0.08 V·s/rad. At a certain speed it draws 5 A. Estimate its angular speed, electromagnetic torque, and converted mechanical power, then explain what changes during startup." }, { "role": "assist...
q42s
physics
kimi-k3
[ { "role": "user", "content": "A balanced three-phase induction motor is rated 7.5 kW, 400 V line-to-line, 50 Hz, and four poles. At rated load it runs at 1,440 rpm. Calculate synchronous speed, slip, and rotor-current frequency, and explain why the shaft output is not simply equal to the air-gap power." }...
q43s
physics
kimi-k3
[ { "role": "user", "content": "A 50 Ω coaxial cable is 30 m long and has a propagation velocity of 0.66c. A 1 V step is applied through a 75 Ω source to a 100 Ω load. Determine the initial launched voltage, the first load reflection, and when the reflected wave returns to the source; describe the voltage cha...
q44s
physics
kimi-k3
[ { "role": "user", "content": "For a particle in a one-dimensional infinite square well of width L, compare the ground-state energy and position probability density with those of a harmonic oscillator whose ground-state spatial uncertainty is chosen to match the well's. What does the comparison tell us about...
q45s
physics
kimi-k3
[ { "role": "user", "content": "A spin-1/2 particle is prepared in the +x eigenstate and then measured along an axis in the x-z plane at angle θ from the z-axis. Derive the probabilities for the two possible outcomes from the spinor representation, and explain what changes if the preparation is instead a stat...
q46s
physics
kimi-k3
[ { "role": "user", "content": "I'm trying to understand decoherence in a double-slit experiment. Model the path degree of freedom as a qubit that becomes entangled with two possible detector states. Show how the reduced density matrix changes as the detector states become less distinguishable, and connect it...
q47s
physics
kimi-k3
[ { "role": "user", "content": "For a quantum harmonic oscillator, use the ladder operators to obtain the ground-state energy and the expectation values of x² and p². How do those results demonstrate that the ground state is not a particle sitting motionless at the bottom of the potential?" }, { "role...
q48s
physics
kimi-k3
[ { "role": "user", "content": "A particle of energy E approaches a rectangular barrier of height V₀ and width a, with E below V₀. Derive the qualitative dependence of the tunneling probability on barrier width and on √(V₀ − E), then estimate the exponent for an electron crossing a 1.0 nm barrier that is 2 eV...
q49s
physics
kimi-k3
[ { "role": "user", "content": "In the Stern–Gerlach experiment, an unpolarized beam of spin-1/2 atoms is split by a z-oriented magnet, and the upper output is sent through an x-oriented magnet. Predict the output probabilities and explain why inserting a second z-oriented analyzer before the x analyzer chang...
q50s
physics
kimi-k3
[ { "role": "user", "content": "A two-qubit state is |ψ⟩ = (|00⟩ + |01⟩ + |10⟩ − |11⟩)/2. Determine whether it is entangled, calculate either qubit's reduced density matrix, and identify a local basis change that makes the structure of the state easier to interpret." }, { "role": "assistant", "con...
q51s
math
kimi-k3
[ { "role": "user", "content": "I'm solving an inequality with a parameter: (x² − (a+2)x + 2a)/(x−2) ≥ 0. Find the solution set for every real value of a, paying particular attention to values of a where roots coincide or the expression changes sign structure." }, { "role": "assistant", "content":...
q52s
math
kimi-k3
[ { "role": "user", "content": "Solve the system x² + y² = 25 and xy = 6 over the real numbers. Then derive a method for finding x and y without guessing factor pairs, and explain how many ordered solutions exist." }, { "role": "assistant", "content": "<think>\nWe need to solve x² + y² = 25 and xy...
q53s
math
kimi-k3
[ { "role": "user", "content": "For which real values of k does x² − 2(k+1)x + k² − 1 = 0 have two distinct roots that are both greater than 1? Give the parameter intervals and justify the boundary cases." }, { "role": "assistant", "content": "<think>\n1. Define f(x) = x^2 − 2(k+1)x + k^2 − 1, a p...
q54s
math
kimi-k3
[ { "role": "user", "content": "A polynomial p(x) = x³ + ax² + bx + 12 has roots in arithmetic progression, and one root is 2. Determine a and b, then find all possible root triples and explain why the progression condition is restrictive." }, { "role": "assistant", "content": "<think>\nLet the th...
q55s
math
kimi-k3
[ { "role": "user", "content": "Find all real solutions of √(2x + 7) + √(x − 1) = 5. I keep getting an extra value after squaring twice; show a clean way to control the domain and check the candidates." }, { "role": "assistant", "content": "<think>\nWe are to solve √(2x + 7) + √(x − 1) = 5 over th...
q56s
math
kimi-k3
[ { "role": "user", "content": "Solve |2x − 3| + |x + 4| ≤ 11 and express the answer as intervals. Then explain how the breakpoints divide the real line into regions where the inequality becomes linear." }, { "role": "assistant", "content": "<think>\n1. Identify breakpoints where each absolute val...
End of preview. Expand in Data Studio

Kimi-K3-STEM-Reasoning-750

A synthetic supervised fine-tuning dataset containing 748 STEM and logic reasoning conversations in English.
The primary target of this dataset is supervised fine-tuning and reasoning distillation experiments with Qwen3.5-4B to enhance its scientific reasoning capabilities with data from open LLM teachers.

Contents and Format

The train_748_unchecked.jsonl split contains 748 samples in the following ChatML format:

{
  "id": "q60s",
  "domain": "physics",
  "model": "kimi-k3",
  "messages": [
    {"role": "user", "content": "question"},
    {"role": "assistant", "content": "<think>reasoning...</think>\n\nanswer"}
  ]
}

id consists of a numeric counter, plus s for single turn samples, m for multi-turn (currently samples with two turns) or t for samples with three turns (e.g. q79s, q43m, q13t).
domain is one of the following: math, physics, chemistry or logic.
All samples have reasoning traces between <think> and </think> in the assistant's response. Multi-turn samples contain alternating user and assistant messages in messages.

The difficulty and thus the reasoning verbosity of the questions tends to increase as their numeric counter grows. It isn't a noticable change when comparing identical samples or questions whose IDs are close, but the last questions are generally harder / more complex than the first ~150 ones.

Data generation

All questions were synthetically generated using various content rules and then answered by Kimi K3 through https://apinex.bond's free tier. Specifically,

  • Reasoning was generated by telling the model to reason in the system prompt as I couldn't find another way to trigger it.
  • I have not verified that the model served by APInex is actually Kimi K3.
  • No samples in this version have been independently verified, so they may contain false information or incorrent facts and conclusions. A clean, verified version will be uploaded once it is created.

Note: I did verify a few answers manualy and they seem to be correct.

Licensing and attribution

This dataset is licensed under Creative Commons Attribution 4.0 International (CC BY 4.0). The license for the Kimi K3 model weights and code can be found in the Kimi K3 repository.

If you use or redistribute this dataset, please cite both the dataset and the Kimi K3 technical report.

@misc{kimi_team_2026_kimi_k3,
  author = {{Kimi Team}},
  title = {{Kimi K3: Open Frontier Intelligence}},
  year = {2026},
  eprint = {2607.24653},
  archivePrefix = {arXiv},
  primaryClass = {cs.CL},
  url = {https://arxiv.org/abs/2607.24653}
}

@misc{kimi_k3_stem_reasoning,
  author = {pyrod3v},
  title = {{Kimi-K3-STEM-Reasoning-750}},
  year = {2026},
  publisher = {Hugging Face},
  url  = {https://huggingface.co/datasets/pyrod3v/Kimi-K3-STEM-Reasoning-750}
}
Downloads last month
65

Paper for pyrod3v/Kimi-K3-STEM-Reasoning-750