id stringlengths 18 18 | category stringclasses 10
values | prompt stringlengths 21 68 | response stringlengths 1.18k 11.4k |
|---|---|---|---|
stage1-train-01300 | prop | Build a low-poly brick phone. | Asset: Brick phone
Triangle budget: 350
Brief: Chunky 1980s mobile phone standing upright, slightly tilted back: tall rectangular body, stubby antenna rising from the top back corner, small ivory screen near the top front, recessed keypad block below it. Black body with brass keypad and iron trim.
Required named parts:... |
stage1-train-01301 | architecture | I need a low-poly brick smokehouse. | Asset: Brick smokehouse
Triangle budget: 500
Brief: Compact square smokehouse: solid brick walls with a shallow gabled roof, a narrow plank door on the front (+Z), and a squat vent chimney rising from the ridge. Brick rust-red, roof dark wood, door ivory-trimmed dark wood.
Required named parts: walls, roof, door, chimn... |
stage1-train-01302 | vehicle | Build a low-poly brigantine sailing ship. | Asset: Toy brigantine
Triangle budget: 900
Brief: Two-masted brigantine, bow pointing +Z: oak hull with raised stern quarter and a small cabin, angled bowsprit forward, darkWood foremast and mainmast carrying ivory square sails, iron fittings and a stern rudder. Sits upright with keel at y=0.
Required named parts: hull... |
stage1-train-01303 | bird, sea creature or bug | Build a low-poly bristle-tail sea bug. | Asset: Bristle-tailed sea bug
Triangle budget: 500
Brief: Small crawling sea bug: low domed segmented shell over a pale underbelly, small head poking forward (+Z) with two short antennae, three stubby legs per side, and a fan of three flat spiky bristles sweeping up and back from the rear. Iron shell, sage legs, brass ... |
stage1-train-01304 | bird, sea creature or bug | I need a low-poly bristleworm sea worm. | Asset: Bristleworm
Triangle budget: 700
Brief: Long segmented marine worm lying flat on the ground, body along Z with the small head toward +Z and tapering tail at -Z. Rust-red ringed body segments, a darker jawed head, and rows of pale ivory bristle pairs fanning out sideways from each side of the body. Flat-shaded, e... |
stage1-train-01305 | animal | Build a low-poly British shorthair cat. | Asset: Blue British shorthair
Triangle budget: 550
Brief: Standing cat facing +Z: chunky rounded barrel body, big round head set low on a thick neck, small triangular ears, four short thick legs, and a plush tail curled up behind. Coat iron blue-grey, brass eyes, ivory chest patch.
Required named parts: body, head, ear... |
stage1-train-01306 | bird, sea creature or bug | Build a low-poly swordfish. | Asset: Broadbill swordfish
Triangle budget: 550
Brief: Streamlined swordfish swimming horizontally, long flat bill pointing +Z, tall curved dorsal fin, crescent tail fin, two small pectoral fins; lowest fin tips resting at y=0. Navy body with iron bill and fins, ivory eye spots.
Required named parts: body, bill, dorsal... |
stage1-train-01307 | tool or gear | Build a low-poly hand-crank seed spreader. | Asset: Canvas broadcast seeder
Triangle budget: 550
Brief: Hand broadcast seeder: a sagging canvas hopper bag with a narrow collar at the bottom, a shoulder strap looping up and back over the top, and a crank with a short wooden handle driving a small toothed spinner disc under the collar. Sage canvas, iron disc and sh... |
stage1-train-01308 | plant or nature | Build a low-poly broccoli head. | Asset: Broccoli head
Triangle budget: 500
Brief: Upright broccoli: short thick pale-green stalk with a slight flare at the cut base, topped by a domed crown of chunky clustered florets. Florets use flat sage green, stalk a lighter green; all bumps overlap so the crown reads as one mass. Grows upward, stem faces -Y.
Req... |
stage1-train-01309 | plant or nature | I need a low-poly broken log. | Asset: Broken oak log
Triangle budget: 400
Brief: Fallen log lying along the X axis, bark darkWood over an oak core. One end splintered into a jagged broken face of pale ivory heartwood; the other end rounded and sealed. Two short branch stubs jut from the upper bark, all fused to the trunk.
Required named parts: log_b... |
stage1-train-01310 | tool or gear | Build a low-poly broken shortsword. | Asset: Broken shortsword
Triangle budget: 400
Brief: Shortsword standing point-up: iron pommel resting on the ground, ivory wrapped grip, brass crossguard, then a short iron blade snapped off at two-thirds with a jagged uneven break. Blade flat faces +Z.
Required named parts: pommel, grip, crossguard, blade, break_face... |
stage1-train-01311 | architecture | I need a low-poly ruined wall chunk. | Asset: Crumbled wall segment
Triangle budget: 550
Brief: A short run of coursed stone wall running along X, flat-shaded blocks with a jagged, unevenly broken top; a stub of oak beam juts from the face and a few loose stones sit against the foot. Stone in flat grey with ivory and sage accents, darkWood beam.
Required na... |
stage1-train-01312 | plant or nature | Build a low-poly bromeliad plant. | Asset: Arching bromeliad
Triangle budget: 450
Brief: Rosette plant sitting on the ground: a ring of wide arching spiky leaves curving outward and down, a tighter upright inner ring forming the central cup, and a short rust-and-brass flower spike rising from the middle. Sage green foliage.
Required named parts: leaf_out... |
stage1-train-01313 | bird, sea creature or bug | I need a low-poly bronze corydoras catfish. | Asset: Bronze corydoras
Triangle budget: 400
Brief: Armoured corydoras resting on the ground, head and barbels toward +Z, tail at -Z: tall humped body with two rows of bony plates, wedge head with a pair of barbels at the mouth, small triangular dorsal fin, forked tail fin, two low pectoral fins splayed to the sides, t... |
stage1-train-01314 | bird, sea creature or bug | Build a low-poly bronze eagle statue. | Asset: Weathered bronze eagle
Triangle budget: 750
Brief: Bronze eagle statue in upright alert pose facing +Z, wings half-spread and raised, hooked beak forward, fanned tail. Body is the largest mass, head about one third body height, wings broad planar fans, short legs beneath; brass #bc974a with rust #b65f3b patina a... |
stage1-train-01315 | tool or gear | I need a low-poly bronze helmet. | Asset: Bronze helmet
Triangle budget: 450
Brief: Plumed bronze helm standing upright: rounded dome with a flared neck rim, hinged cheek guards on both sides framing the face opening (+Z), and a low crest running front to back over the top. Brass dome and rim, rust-red crest, iron hinge pins.
Required named parts: dome,... |
stage1-train-01316 | fantasy or game | I need a low-poly bronze key. | Asset: Bronze key
Triangle budget: 250
Brief: Key lying flat on the ground, long axis along Z: round looped bow at the back (-Z), slender shaft forward (+Z) with a raised collar near the bow, and a stepped bit with two square teeth at the tip pointing +X. Solid brass colour throughout, flat-shaded.
Required named parts... |
stage1-train-01317 | fantasy or game | I need a low-poly bronze lamp for a fantasy game. | Asset: Bronze oil lamp
Triangle budget: 400
Brief: Small oil lamp standing on a flat base: rounded flattened body, a tapered spout extending forward (+Z), a curved loop handle at the back (-Z), and a domed hinged lid with a small finial on top. Brass with dark iron accents.
Required named parts: base, body, spout, hand... |
stage1-train-01318 | animal | Build a low-poly bronze mouse figurine. | Asset: Little bronze mouse
Triangle budget: 400
Brief: Small cast-bronze mouse sitting up, rounded haunch-heavy body, pointed head tilted slightly up facing +Z, two round ears, thin curved tail trailing behind (-Z), four small feet flat on the ground. Brass-bronze finish with darker recesses.
Required named parts: body... |
stage1-train-01319 | fantasy or game | Build a low-poly bronze shortsword standing point-up. | Asset: Bronze shortsword
Triangle budget: 400
Brief: Upright shortsword, tip up, pommel resting at ground level: flat tapered double-edged bronze blade with a short central ridge, straight iron crossguard, wrapped darkWood grip, rounded brass pommel. Slight taper and bevels give it a hand-forged look.
Required named pa... |
stage1-train-01320 | architecture | Build a low-poly brooder house for chicks. | Asset: Little brooder house
Triangle budget: 700
Brief: Small gabled brooder hut facing +Z: boxy oak body, darkWood gable roof with slight overhang, plain plank door and one square window on the front, a short slant ramp down to the ground, and a small iron vent stack on the roof for the heat lamp. Sage trim, ivory har... |
stage1-train-01321 | furniture | I need a low-poly broom closet cabinet. | Asset: Tall broom closet
Triangle budget: 550
Brief: Tall narrow cabinet on a small plinth with a slight overhanging cornice, two full-height front doors meeting at the centre, each with a small brass knob. Oak carcass with dark wood trim, doors facing +Z.
Required named parts: cabinet_body, door_left, door_right, knob... |
stage1-train-01322 | vehicle | Build a low-poly horse-drawn brougham cab. | Asset: Black brougham cab
Triangle budget: 900
Brief: Enclosed four-wheel carriage facing +Z: boxy cabin with a curved-front lower body and a raised driver's seat on the front, domed roof, small glazed door panel on the side, two tall rear wheels and two smaller front wheels on a front axle, plus two straight shafts pr... |
stage1-train-01323 | animal | Build a low-poly brown bat. | Asset: Crouching brown bat
Triangle budget: 550
Brief: Bat crouched on the ground facing +Z with wings half-spread to the sides and slightly raised, small clawed feet touching y=0. Rounded furry body and short head with two tall pointed ears; membrane wings with three visible finger ridges; tiny ivory eyes. Body darkWo... |
stage1-train-01324 | animal | I need a low-poly field mouse. | Asset: Field mouse
Triangle budget: 500
Brief: Crouched brown field mouse: low elongated body resting near the ground, tapered head pushed forward (+Z) into a pointed snout, two small round ears set high, black bead eyes, ivory underside. Long thin tail sweeping back and curling slightly. Face +Z, ground at y=0.
Requir... |
stage1-train-01325 | container or food | I need a low-poly brown paper lunch bag. | Asset: Brown paper lunch bag
Triangle budget: 300
Brief: Upright paper lunch bag standing on a flat folded base, body slightly wider at the top with soft crumpled creases, opening at the top rim with a rolled overhanging lip; a light diagonal fold crease across the front. Warm brown paper with darker creased edges.
Req... |
stage1-train-01326 | animal | Build a low-poly polecat. | Asset: Brown polecat
Triangle budget: 650
Brief: Standing polecat facing +Z: long low rounded body on four short legs, small head with two small rounded ears, a dark band across the eyes, and a thick bushy tail sweeping back and slightly up. Oak body, darkWood legs and tail tip, ivory cheek patches.
Required named part... |
stage1-train-01327 | animal | I need a low-poly stoat. | Asset: Brown stoat
Triangle budget: 550
Brief: Slender stoat standing alert on four short legs, long low body, small rounded head with a pointed snout and tiny ears, long tail sweeping back (-Z) with a black tip. Oak-brown coat, ivory chin and belly, black tail tip. Face +Z.
Required named parts: body, head, snout, ear... |
stage1-train-01328 | animal | Build a low-poly brown woodrat. | Asset: Brown woodrat
Triangle budget: 550
Brief: Pack rat standing low on all fours, nose forward +Z, plump rounded body slightly hunched, large rounded ears, small dark eyes, a long bare-ish tail curling behind (-Z). Warm oak-brown fur with ivory belly and dark wood tail.
Required named parts: body, head, ear_left, ea... |
stage1-train-01329 | container or food | Build a low-poly brownie. | Asset: Fudgy brownie
Triangle budget: 250
Brief: Squat square slab with slightly domed, cracked top and a crisp lighter edge rim; one corner chipped off to show a darker gooey interior. Chocolate brown body with darker top, ivory-tinged crumb rim, two or three small nut-pebble accents on top.
Required named parts: brow... |
stage1-train-01330 | tool or gear | Build a low-poly brush holder. | Asset: Studio brush holder
Triangle budget: 450
Brief: Upright tapered eight-sided holder, waist-high, with a thick iron rim at the open top; three brushes of differing heights stand inside, leaning slightly, each with an oak handle, iron ferrule and sage bristles. Front faces +Z, holder sits flat on the ground.
Requir... |
stage1-train-01331 | tool or gear | I need a low-poly brush hook. | Asset: Brush hook
Triangle budget: 350
Brief: Hand brush hook laid flat, handle toward -Z, hooked blade forward at +Z: straight oak handle, iron ferrule collar, short shank, then a curved flat blade with a hooked tip. Dark iron blade, brass rivet.
Required named parts: handle, ferrule, blade, hook_tip, rivet
```javasc... |
stage1-train-01332 | plant or nature | Build a low-poly brussels sprout stalk. | Asset: Brussels sprout stalk
Triangle budget: 700
Brief: Upright thick central stalk rising from ground, small round sprouts packed in a spiral up the stalk, each tucked against it, topped with a crown of broad planar leaves. Sage green throughout, slightly varied per part.
Required named parts: stalk, sprout_1, sprout... |
stage1-train-01333 | bird, sea creature or bug | I need a low-poly bubble coral. | Asset: Pale bubble coral
Triangle budget: 450
Brief: Upright bubble coral: a short stubby stalk rising from the ground into a tight cluster of rounded, bulbous vesicles of varying sizes, hinting at a shallow bowl shape. Ivory body with sage-shadowed undersides and a few iron-grey crevices. Flat-shaded, all bubbles fuse... |
stage1-train-01334 | fantasy or game | I need a low-poly bubble slime character. | Asset: Bubble slime mascot
Triangle budget: 500
Brief: Blobby slime sitting wide and low, a soft dome body with a slightly pointed top, two black bead eyes and a small round mouth on the front face; three ivory bubbles of different sizes stuck to its back and sides, all touching the body. Sage slime, ivory bubbles, bla... |
stage1-train-01335 | prop | I need a low-poly bottle of bubble solution. | Asset: Bubble solution bottle
Triangle budget: 400
Brief: Small upright bottle: squared tapered body with a short shoulder, a narrow neck, and a brass screw cap on top; a thin ivory band wraps the body as a label. Sage glass, brass cap, ivory band, front facing +Z.
Required named parts: body, shoulder, neck, cap, label... |
stage1-train-01336 | container or food | I need a low-poly bubble tea cup. | Asset: Bubble tea cup
Triangle budget: 400
Brief: Takeaway bubble tea: slightly tapered cup standing on ground, domed clear lid on top, thick straw poking up through the lid at a slight angle, dark round boba pearls clustered in the bottom. Ivory cup, navy pearls, rust straw.
Required named parts: cup, lid, straw, pear... |
stage1-train-01337 | prop | I need a low-poly bubble wand. | Asset: Bubble wand
Triangle budget: 250
Brief: Toy bubble wand held upright: a short turned handle at the bottom, a slim shaft rising to a flat open ring loop at the top tilted slightly toward the viewer, loop in the same plane as the front face. Oak handle, brass ring.
Required named parts: handle, shaft, ring_loop
`... |
stage1-train-01338 | container or food | I need a low-poly soda bottle. | Asset: Bubbly soda bottle
Triangle budget: 450
Brief: Stubby soda bottle standing upright: cylindrical body, short tapered shoulder, narrow neck, brass crown cap, an ivory label band around the waist. Sage-green glass, rounded base flare.
Required named parts: body, shoulder, neck, cap, label
```javascript
function bu... |
stage1-train-01339 | vehicle | I need a low-poly buffer stop for a rail end. | Asset: Railway buffer stop
Triangle budget: 500
Brief: End-of-track buffer stop facing +Z: two short upright posts on a pair of rail-base beams, a cross beam joining them at buffer height, two round buffer heads projecting toward +Z, and a diagonal brace leaning back (-Z). Iron and rust with oak beams.
Required named p... |
stage1-train-01340 | furniture | I need a low-poly buffet cabinet. | Asset: Oak buffet cabinet
Triangle budget: 550
Brief: Low sideboard facing +Z: squat rectangular oak body on four short tapered darkWood legs, overhanging darkWood top slab, two flat sage door panels with small round brass knobs. Nothing hollow, all parts flush and connected.
Required named parts: body, top, leg_front_... |
stage1-train-01341 | tool or gear | I need a low-poly bug net. | Asset: Bug net
Triangle budget: 350
Brief: Butterfly net standing upright: an oak handle rising from the ground, a short brass ferrule joining it to a round iron hoop, and an ivory net bag hanging in a shallow cone from the hoop. Hoop faces +Z, slight backward lean.
Required named parts: handle, ferrule, hoop, net_bag
... |
stage1-train-01342 | fantasy or game | Build a low-poly bugbear stalker for a fantasy game. | Asset: Crouching bugbear stalker
Triangle budget: 900
Brief: Hunched bugbear crouched low and leaning forward (+Z), knees deeply bent, long arms hanging with a short iron dagger held low in the right hand. Shaggy darkWood fur torso with an oak muzzle and broad ears, rust leather loincloth, ivory claws; heavy planar sho... |
stage1-train-01343 | furniture | I need a low-poly built-in dishwasher. | Asset: Built-in dishwasher
Triangle budget: 400
Brief: Under-counter dishwasher as a boxy unit: flat front door panel facing +Z, a recessed control strip along the top edge, a horizontal bar handle across the upper door, and a dark kick plate at the base. Iron body, black control strip, brass handle.
Required named par... |
stage1-train-01344 | vehicle | I need a low-poly bulk carrier ship. | Asset: Weathered bulk carrier
Triangle budget: 900
Brief: Long flat-decked bulk carrier with bow facing +Z and superstructure aft: navy hull with rust-streaked sides, raised forecastle at the bow, four flat hatch covers in a row along the deck, boxy ivory bridge block topped by a dark funnel with brass band. Everything... |
stage1-train-01345 | vehicle | Build a low-poly bulkhead flatcar. | Asset: Bulkhead flatcar
Triangle budget: 800
Brief: Rail flatcar with a long flat deck, low vertical bulkhead walls rising at both ends and angled slightly outward, two trucks beneath each end carrying four wheels, and coupling knuckles protruding from each end. Dark wood deck planks, iron trucks and wheels.
Required n... |
stage1-train-01346 | animal | Build a low-poly bull moose standing still. | Asset: Bull moose
Triangle budget: 800
Brief: Standing bull moose facing +Z: heavy humped shoulder body, short thick neck angled forward, long drooping muzzle, two broad palmate antlers swept out and up, four long dark legs, small dewlap flap under the throat. Dark wood-brown coat, ivory antlers, black hooves.
Required... |
stage1-train-01347 | bird, sea creature or bug | Build a low-poly bull shark. | Asset: Bull shark
Triangle budget: 550
Brief: Stout shark swimming forward along +Z: thick torpedo body, blunt short snout, tall triangular first dorsal fin, small second dorsal, broad crescent tail fin, two swept-back pectoral fins. Iron-grey back, ivory underside.
Required named parts: body, snout, dorsal_fin, dorsal... |
stage1-train-01348 | animal | Build a low-poly bull terrier. | Asset: Bull terrier
Triangle budget: 800
Brief: Standing bull terrier facing +Z: stocky deep-chested body with straight front legs, egg-shaped head with a downward-sloping Roman muzzle, small erect triangular ears, short tapered tail held level. Ivory coat, one rust ear patch, black nose.
Required named parts: body, he... |
stage1-train-01349 | vehicle | I need a low-poly bullet train. | Asset: Streamlined bullet train
Triangle budget: 700
Brief: Streamlined train facing +Z: elongated rounded body with a tapered nose at the front and matching tail at the back, ivory wraparound windshield and continuous side window strip, dark iron bogies beneath carrying four wheels that touch the ground. Navy body wit... |
stage1-train-01350 | tool or gear | Build a low-poly bullnose plane. | Asset: Bullnose plane
Triangle budget: 400
Brief: Small hand plane seen from the side: chunky rectangular iron body with a flat sole and no front horn, blade set at the very front tip angled back, brass lever cap and screw on top, short oak rear handle. Front faces +Z.
Required named parts: body, sole, blade, lever_cap... |
stage1-train-01351 | bird, sea creature or bug | Build a low-poly bumble bee. | Asset: Bumble bee
Triangle budget: 500
Brief: Plump bee hovering slightly above ground: rounded body with banded yellow and black stripes, small head with two antennae, six short legs tucked under, two flat translucent wings angled up over the back. Facing +Z.
Required named parts: body, head, antenna_left, antenna_rig... |
stage1-train-01352 | bird, sea creature or bug | Build a low-poly bumblebee. | Asset: Bumblebee
Triangle budget: 350
Brief: Plump bumblebee: fat rounded abdomen banded black and yellow, smaller dark head at front (+Z), two flat translucent wings swept back over the body, two thin antennae, short dangling legs. Black #242a29 body with a flat yellow band.
Required named parts: body, head, wing_left... |
stage1-train-01353 | container or food | I need a low-poly bundt cake. | Asset: Glazed bundt cake
Triangle budget: 500
Brief: Round fluted ring cake with a central chimney hole, sitting flat on the ground, scalloped outer wall of vertical ridges. Warm baked-brown body with an ivory glaze pooling over the top and a couple of drips down the flutes.
Required named parts: bundt_body, glaze_top,... |
stage1-train-01354 | container or food | I need a low-poly bundt pan. | Asset: Fluted bundt pan
Triangle budget: 600
Brief: Bundt pan sitting flat, open side up: a wide fluted ring body with a hollow central tube rising to the same height as the outer rim, flat rim ring on top, two small side handles. Iron body with brass handles.
Required named parts: body, flutes, center_tube, rim, handl... |
stage1-train-01355 | prop | I need a low-poly bunting garland. | Asset: Bunting garland
Triangle budget: 400
Brief: A sagging rope strung between two points, with six triangular pennant flags hanging point-down along it, alternating ivory, rust, sage and navy, each flag touching the rope. No poles or scenery.
Required named parts: rope, flag_1, flag_2, flag_3, flag_4, flag_5, flag_6... |
stage1-train-01356 | vehicle | Build a low-poly buoy tender ship. | Asset: Buoy tender
Triangle budget: 750
Brief: Small working ship facing +Z: navy hull with raked bow, flat ivory wheelhouse set back, short mast with a boom crane over the stern deck, one small rust buoy stowed on deck. Sits at y=0 on a flat keel line.
Required named parts: hull, deck, wheelhouse, mast, boom_crane, bu... |
stage1-train-01357 | container or food | I need a low-poly burger wrapper. | Asset: Crinkled burger wrapper
Triangle budget: 400
Brief: An open paper wrapper sitting flat with the burger inside: squashed square base, four fan-folded paper walls leaning outward, front and back folds peeled down to reveal a dome of bun peeking over the rim. Ivory paper with a rust stripe, bun oak.
Required named ... |
stage1-train-01358 | architecture | Build a low-poly burial barrow. | Asset: Mossy burial barrow
Triangle budget: 500
Brief: Round grassy earth mound rising from the ground, its flat face at +Z cut by a small stone portal: two upright slabs with a lintel across the top, opening into a dark chamber. A ring of low kerb stones girdles the base. Sage grass over iron-grey stone, black chamber... |
stage1-train-01359 | architecture | I need a low-poly burial mound. | Asset: Grass-capped burial mound
Triangle budget: 550
Brief: Low domed earth mound with a flat stone kerb ring at its base and a small rectangular entrance recessed into the +Z face, framed by two upright stones and a lintel slab with a dark passage mouth behind. Earthy darkWood mound, iron-grey stones, sage grass cap.... |
stage1-train-01360 | container or food | Create a low-poly sack of carrots. | Asset: Burlap carrot bag
Triangle budget: 500
Brief: Open burlap sack, slightly slumped rounded body with a folded rim at the top, three carrot tops with green fronds poking out, one carrot leaning against the side. Sack in ivory-tan with rust stitching.
Required named parts: sack, rim, carrot_1, carrot_2, carrot_3, fr... |
stage1-train-01361 | architecture | Build a low-poly Burmese bamboo hut on stilts. | Asset: Bamboo stilt hut
Triangle budget: 900
Brief: Small raised dwelling: four bamboo stilts lifting a plank deck above the ground, a boxy woven-bamboo wall block with a dark doorway facing +Z, and a steep thatched hip roof overhanging all sides. A short ladder leans from ground to deck at the front. Warm bamboo tan w... |
stage1-train-01362 | animal | Build a low-poly Burmese cat. | Asset: Sable Burmese cat
Triangle budget: 650
Brief: Standing cat facing +Z: long low body on four short straight legs, upright neck rising to a rounded wedge head with two small pointed ears, long tail curved up and back. Warm dark-brown coat with slightly darker muzzle and paws.
Required named parts: body, head, ear_... |
stage1-train-01363 | tool or gear | I need a low-poly burnisher tool. | Asset: Brass burnisher
Triangle budget: 350
Brief: Hand burnisher lying flat and angled slightly: darkWood turned handle, brass ferrule, short brass shaft rising to a smooth curved agate-like tip that hooks forward over +Z. Handle at back, tip forward.
Required named parts: handle, ferrule, shaft, tip
```javascript
fu... |
stage1-train-01364 | plant or nature | Build a low-poly burnt tree trunk. | Asset: Charred hollow trunk
Triangle budget: 500
Brief: Standing dead trunk, slightly tapered and leaning a touch, crown broken off jagged and the top hollowed to a dark opening. Three root flares grip the ground; a charred split runs up one side. Black charred body with darkWood where the bark is intact and a small ru... |
stage1-train-01365 | container or food | Build a low-poly burrito. | Asset: Folded burrito
Triangle budget: 400
Brief: A wrapped burrito lying along the X axis, resting on the ground: a fat rolled cylinder of tortilla slightly tapered, with both ends pinched and folded flat shut, and a shallow diagonal seam crease across the top where the wrap overlaps. Warm tan tortilla (#c9a06a) with ... |
stage1-train-01366 | fantasy or game | I need a low-poly burrowing ankheg. | Asset: Burrowing ankheg
Triangle budget: 900
Brief: Insectoid burrower crouched low: thick segmented abdomen curving back and up, armoured thorax with raised chitin plates, a wedge-shaped head with two forward mandibles and small antennae, six short splayed legs gripping the ground. Rust-brown chitin with black mandibl... |
stage1-train-01367 | architecture | Build a low-poly bus terminal building. | Asset: Small bus terminal
Triangle budget: 900
Brief: Low roadside bus terminal: rectangular ivory main hall with a flat overhanging roof, a wide open front bay facing +Z sheltered by a cantilevered canopy on two iron columns, glazed ticket window and a door on the front wall, oak bench under the canopy. Front faces +Z... |
stage1-train-01368 | container or food | I need a low-poly butter dish. | Asset: Lidded butter dish
Triangle budget: 350
Brief: Rectangular butter dish sitting flat: shallow open tray with a slightly domed lid resting on it, a small round knob at the lid's centre, and a pale yellow butter block visible at the tray's front edge. Ivory ceramic with a sage lid and brass knob.
Required named par... |
stage1-train-01369 | container or food | I need a low-poly butter knife. | Asset: Butter knife
Triangle budget: 250
Brief: Butter knife lying flat on the ground, blade pointing +Z and handle back toward -Z, slight thickness. Broad rounded-tip flat blade in iron, short brass ferrule, tapered oak handle.
Required named parts: blade, ferrule, handle
```javascript
function buildAsset(THREE) {
... |
stage1-train-01370 | bird, sea creature or bug | Build a low-poly butterfly koi. | Asset: Butterfly koi
Triangle budget: 450
Brief: Koi in a gentle swimming pose, body along the Z axis with snout at +Z and long trailing fins swept back, belly just above y=0. Plump ivory body with rust patches, one tall dorsal fin, two long pectoral fins, and an oversized flowing split tail fin; two short barbels at t... |
stage1-train-01371 | bird, sea creature or bug | I need a low-poly butterfly pupa. | Asset: Hanging butterfly pupa
Triangle budget: 350
Brief: Vertical spindle-shaped chrysalis hanging from a small silk pad at the top: widest at mid-height, tapering to a blunt point at the bottom, slightly flattened front-to-back. A raised longitudinal spine ridge runs down the front (+Z), with two small brass-tipped t... |
stage1-train-01372 | plant or nature | Build a low-poly butternut squash still on its vine. | Asset: Butternut squash on vine
Triangle budget: 400
Brief: Squash lying on its side with the bulbous seed end toward +Z and a narrower neck rising back (-Z) to a short stubby stem; a sage vine trails off the stem with one tendril curl and a single flat leaf. Pale tan body, darkWood stem.
Required named parts: squash_b... |
stage1-train-01373 | tool or gear | I need a low-poly pair of hand pruners. | Asset: Bypass pruners
Triangle budget: 400
Brief: Hand pruners standing blades-up: two curved handles meeting at a central pivot bolt, a straight cutting blade and a curved hook blade crossing above the pivot, small coil spring between the handles. Iron blades with brass bolt and oak grips.
Required named parts: blade_... |
stage1-train-01374 | tool or gear | I need a low-poly C-clamp. | Asset: Iron C-clamp
Triangle budget: 350
Brief: Iron C-clamp lying with the jaws opening toward +Z: a chunky C-shaped frame in the XZ plane, flat fixed anvil pad on the upper jaw, threaded screw passing through the lower jaw with a brass swivel pad on its tip and a crossbar handle through the screw's rear end.
Required... |
stage1-train-01375 | vehicle | I need a low-poly taxi cab. | Asset: City taxi cab
Triangle budget: 700
Brief: Compact cab car facing +Z: rounded boxy lower body with a raised cabin greenhouse on top, four small wheels at the corners, ivory windshield and side windows, a small brass roof sign on the cabin. Navy body, black tyres.
Required named parts: body, cabin, windshield, whe... |
stage1-train-01376 | plant or nature | I need a low-poly cabbage. | Asset: Cabbage head
Triangle budget: 400
Brief: Round dense cabbage: tight inner ball of sage green, four broad outer leaves cupping it and folding outward at different heights, short pale stem stub at the base sitting on the ground. Slight lean, front faces +Z.
Required named parts: head, leaf_outer_1, leaf_outer_2, l... |
stage1-train-01377 | bird, sea creature or bug | I need a low-poly cabbage white butterfly. | Asset: Cabbage white butterfly
Triangle budget: 350
Brief: Butterfly perched with wings held up in a shallow V, body horizontal pointing +Z, two thin antennae angling forward. Slender segmented body in black, ivory wings with dark charcoal tips, small hindwing lobes.
Required named parts: body, forewing_left, forewing_... |
stage1-train-01378 | vehicle | I need a low-poly cabin cruiser boat. | Asset: Cabin cruiser
Triangle budget: 700
Brief: Small motor cruiser floating upright, pointed bow facing +Z, flat transom at back. Ivory hull with a navy waterline stripe, oak foredeck, boxy cabin with angled windshield and a brass railing along each cabin side.
Required named parts: hull, deck, cabin, windshield, rai... |
stage1-train-01379 | tool or gear | I need a low-poly cabinet scraper. | Asset: Cabinet scraper
Triangle budget: 250
Brief: Card scraper in a wooden holder: thin flat iron plate standing slighty tilted, gripped along its lower edge by an oak block with two brass screws; plate corners chamfered, top edge showing the burnished burr line. Front faces +Z.
Required named parts: blade, holder, sc... |
stage1-train-01380 | vehicle | Build a low-poly cable car gondola. | Asset: Hanging cable car
Triangle budget: 800
Brief: Gondola hanging level and facing +Z: boxy cabin with a chamfered lower skirt, ivory window band on all four sides, iron roof, a slim hanger arm rising to a brass grip clamped on a short horizontal cable segment. Navy body, iron frame.
Required named parts: cabin, roo... |
stage1-train-01381 | furniture | I need a low-poly cable management tray. | Asset: Under-desk cable tray
Triangle budget: 400
Brief: Under-desk cable tray: shallow open rectangular basket with slotted side walls and a solid floor, hung from two L-shaped mounting brackets at the back edge. Iron tray with darkWood brackets, front faces +Z.
Required named parts: tray_floor, tray_wall_front, tray_... |
stage1-train-01382 | tool or gear | Build a low-poly cable reel. | Asset: Wooden cable reel
Triangle budget: 500
Brief: Empty wooden cable reel standing on edge: two thick round flanges joined by a narrower central drum, cable wound in a few flat coils around the drum, plank faces on the flanges. Oak flanges, darkWood drum, black cable. Axis along X, flanges face left/right.
Required ... |
stage1-train-01383 | vehicle | I need a low-poly caboose train car. | Asset: Rust-red caboose
Triangle budget: 900
Brief: Short freight caboose facing +Z: boxy cabin on a flat chassis, gently curved roof, raised cupola with small ivory windows at the centre, end platforms with railings front and back, a ladder up one side, two wheel bogies beneath. Rust body, darkWood trim, iron wheels, ... |
stage1-train-01384 | plant or nature | Build a low-poly cacao tree. | Asset: Fruiting cacao tree
Triangle budget: 750
Brief: Small cacao tree: short upright darkWood trunk splitting into three splayed branches, each topped with a fan of broad sage oval leaves; two rust pod shapes hang directly off the trunk. Flat-shaded, no plinth.
Required named parts: trunk, branch_1, branch_2, branch_... |
stage1-train-01385 | architecture | Build a low-poly cafe building. | Asset: Little corner cafe
Triangle budget: 800
Brief: Compact single-storey cafe: rectangular ivory body sitting at ground level, broad dark-navy gable roof overhanging on all sides, centered darkWood door on the +Z face flanked by two square windows, a sage awning strip above the door, and a small brick chimney and bl... |
stage1-train-01386 | animal | I need a low-poly cairn terrier. | Asset: Shaggy cairn terrier
Triangle budget: 700
Brief: Small shaggy terrier standing squarely, front facing +Z, head up with a stubby bearded muzzle, two upright triangular ears, a short upright tail, four short sturdy legs. Wheaten oak coat with a darker muzzle and ivory beard tufts.
Required named parts: body, head,... |
stage1-train-01387 | container or food | I need a low-poly cake box. | Asset: Bakery cake box
Triangle budget: 450
Brief: Square takeaway cake box, open with the lid tilted back on a rear hinge; a round frosted cake sits on the base inside, visible from the front. Ivory card box, sage frosting with a rust jam top.
Required named parts: box_base, lid, hinge, cake_base, cake_frosting
```ja... |
stage1-train-01388 | container or food | I need a low-poly cake carrier case. | Asset: Cake carrier case
Triangle budget: 450
Brief: Round cake carrier: flat ivory base tray with a low rim, a frosted dome lid seated on the rim, a curved brass handle arch across the top of the dome, and two small iron latch clamps at the front and back rim. Upright, front faces +Z.
Required named parts: base_tray, ... |
stage1-train-01389 | container or food | I need a low-poly cake carrier with a handle. | Asset: Cake carrier
Triangle budget: 550
Brief: Round cake carrier: shallow circular base tray with a small rim, a domed lid sitting on the rim (few-sided, slightly faceted), and a tall arched handle bridging over the dome top, mounted on two small side brackets; small iron latch at the front. Base ivory, dome sage, ha... |
stage1-train-01390 | container or food | I need a low-poly cake dome. | Asset: Cake dome
Triangle budget: 350
Brief: Round cake dome: flat circular base plate with a raised rim, a tall faceted glass dome (low-segment cone-ish shell, ivory tint) sitting on the plate, small brass knob at the top. Ground at y=0.
Required named parts: base_plate, dome, knob
```javascript
function buildAsset(T... |
stage1-train-01391 | container or food | I need a low-poly cake tote. | Asset: Brass-handled cake tote
Triangle budget: 550
Brief: Round open cake carrier: shallow ivory tin base with a rolled rim, a sage-frosted cake sitting inside just below the rim, and a tall brass wire handle arching over the cake, anchored in two small lugs on opposite sides of the tin. Front faces +Z, handle arc spa... |
stage1-train-01392 | plant or nature | Build a low-poly calathea plant in a pot. | Asset: Potted calathea
Triangle budget: 700
Brief: Calathea in a tapered pot: short stems rising from the soil, broad oval leaves with pointed tips held at varied heights and tilts in a fan; leaves darker green on top, rust-red underneath. Pot in ivory, soil dark.
Required named parts: pot, soil, stem_1, stem_2, stem_3... |
stage1-train-01393 | plant or nature | Build a low-poly calcite boulder. | Asset: Pale calcite boulder
Triangle budget: 350
Brief: Angular calcite boulder resting on the ground, a broad faceted mass with a flat-ish top plane, plus two smaller crystal chunks leaning against its lower sides. Ivory planes with a few darker crevice faces suggesting depth; no base.
Required named parts: boulder_ma... |
stage1-train-01394 | plant or nature | Build a low-poly calcite crystal cluster. | Asset: Calcite crystal cluster
Triangle budget: 400
Brief: A cluster of three blocky rhombohedral calcite crystals rising from a small dark rocky matrix at ground level: one large tilted crystal, two smaller ones leaning against it, all touching. Ivory faceted bodies with a faint warm tint; darkWood matrix.
Required na... |
stage1-train-01395 | architecture | Build a low-poly calf hutch. | Asset: Calf hutch
Triangle budget: 700
Brief: Small curved-roof hutch facing +Z: rounded shell body open at the front with a dark arched doorway inset, a raised lip across the front, and two wooden skids underneath for dragging. Ivory shell with oak skids and trim.
Required named parts: shell, roof, door_opening_frame,... |
stage1-train-01396 | animal | Build a low-poly calico Persian cat. | Asset: Fluffy calico cat
Triangle budget: 700
Brief: Persian cat sitting upright facing +Z: low squat fluffy body with a rounded ruff, small flat-faced head set low between cheeks, tiny rounded ears, stubby front legs, bushy tail curled around one side. Ivory coat with rust and black patches, black nose.
Required named... |
stage1-train-01397 | tool or gear | I need a low-poly calligraphy pen. | Asset: Calligraphy pen
Triangle budget: 350
Brief: Pen lying flat along Z, centered on x=0, resting on the ground so the barrel touches y=0 along its length; chisel nib points forward +Z, brass end cap at the back. Iron nib with a flat angled writing face, brass ferrule ring, short darkWood grip section, tapering oak b... |
stage1-train-01398 | prop | I need a low-poly camcorder prop. | Asset: Handheld camcorder
Triangle budget: 400
Brief: Shoulder-style camcorder facing +Z: boxy black body wider than tall, a stubby iron lens barrel protruding from the front, a small ivory-ringed lens face, a squared viewfinder eyecup at the rear (-Z) angled up slightly, and a low arch carry handle on top with a brass... |
stage1-train-01399 | bird, sea creature or bug | Build a low-poly camel spider. | Asset: Camel spider
Triangle budget: 700
Brief: Solifuge standing low to the ground: flattened segmented body, small oval abdomen at the back (-Z), forward head with two big forward-jutting chelicerae and two short pedipalps, eight long splayed legs in pairs. Sandy rust and dark tone, flat-shaded.
Required named parts:... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.