id stringlengths 18 18 | category stringclasses 10
values | prompt stringlengths 21 68 | response stringlengths 1.18k 11.4k |
|---|---|---|---|
stage1-train-01400 | tool or gear | I need a low-poly camp broom. | Asset: Camp broom
Triangle budget: 350
Brief: Upright besom-style broom standing on its bristle head at ground level: straight oak handle, a dark wood binding collar, and a flared bundle of ivory bristles splayed at the bottom, tied with a brass band. Front faces +Z.
Required named parts: handle, binding, bristles, ban... |
stage1-train-01401 | tool or gear | I need a low-poly camp cutting board. | Asset: Camp cutting board
Triangle budget: 300
Brief: Flat rectangular plank lying horizontal at y=0 with rounded front corners, a narrower handle tab extending back (-Z) at one end, and a dark round hanging hole cut through the tab. Oak slab with a darker grip band on the tab.
Required named parts: board, handle_tab, ... |
stage1-train-01402 | tool or gear | I need a low-poly camp pillow. | Asset: Camp pillow
Triangle budget: 300
Brief: Rectangular camp pillow lying flat, slightly puffed top and bottom, with a recessed seam band running around the middle edge and a small fabric strap loop at the back (-Z) end. Ivory body with a sage seam band.
Required named parts: pillow_body, seam_band, strap_loop
```j... |
stage1-train-01403 | vehicle | Build a low-poly pickup with a camper shell. | Asset: Camper shell pickup
Triangle budget: 850
Brief: Pickup truck facing +Z: short cab with sloped windshield up front, low cargo bed behind it capped by a boxy ivory camper shell with a small rear window, four chunky black wheels under the fenders, simple bumpers front and back. Navy body, iron trim.
Required named ... |
stage1-train-01404 | vehicle | I need a low-poly camper van. | Asset: Boxy camper van
Triangle budget: 900
Brief: Chunky boxy camper van facing +Z: tall slab body with a slightly raised roof cap, four black wheels tucked under the sides, a wide ivory windshield, two side window strips, and a small front bumper. Sage body, darkWood trim, brass headlights.
Required named parts: body... |
stage1-train-01405 | container or food | Build a low-poly camping cooler bag. | Asset: Camping cooler bag
Triangle budget: 450
Brief: Soft-sided cooler bag, wider than tall, sitting flat on the ground: navy rounded body with an ivory seam band, a lid flap folding over the top and down the front, an arched carry handle on top, a small brass buckle at the front centre, and two short side pockets. Fa... |
stage1-train-01406 | tool or gear | Build a low-poly camping cot. | Asset: Camping cot
Triangle budget: 500
Brief: Folding cot: long rectangular canvas bed stretched taut on a slim frame, four short legs splayed slightly outward, one cross-brace under each end. Frame in dark wood, canvas in navy, brass corner caps.
Required named parts: cot_frame, bed_canvas, leg_1, leg_2, leg_3, leg_4... |
stage1-train-01407 | container or food | I need a low-poly camping pantry trunk. | Asset: Camping pantry trunk
Triangle budget: 500
Brief: Chunky wooden food trunk, lid closed and slightly overhanging the box, iron corner bands, a brass front latch and two side carry handles. Dark wood body with iron fittings, dimensioned like a shallow chest sitting flat on the ground.
Required named parts: body, li... |
stage1-train-01408 | container or food | I need a low-poly can opener. | Asset: Hand-crank can opener
Triangle budget: 350
Brief: Manual can opener lying flat, long axis along X, mechanism facing +Z: a flat iron body bar with a black grip at one end, a brass gear and round cutting wheel at the other, plus an iron crank arm with a small knob standing off the front face.
Required named parts:... |
stage1-train-01409 | bird, sea creature or bug | I need a low-poly Canada goose. | Asset: Canada goose
Triangle budget: 700
Brief: Standing goose facing +Z: plump oak-brown body, long black S-curved neck rising to a black head with an ivory chinstrap patch, short black bill, folded wings on both flanks, webbed black feet flat on the ground, stubby tail at the back.
Required named parts: body, neck, h... |
stage1-train-01410 | animal | I need a low-poly Canada lynx. | Asset: Canada lynx
Triangle budget: 750
Brief: Stocky standing lynx facing +Z: horizontal barrel body, squarish head with a flared cheek ruff, two tufted upright ears, four short legs ending in oversized flat snowshoe paws, short bobbed tail. Grey-tan coat with ivory ruff and black ear tufts.
Required named parts: body... |
stage1-train-01411 | vehicle | Build a low-poly canal barge. | Asset: Canal barge
Triangle budget: 700
Brief: Narrowboat: long flat-bottomed hull with slightly raised bow, low cabin block running most of the length, small round portholes, stern tiller and rudder plate. Oak hull with ivory cabin and navy trim; faces +Z.
Required named parts: hull, cabin, porthole_1, porthole_2, por... |
stage1-train-01412 | container or food | I need a low-poly candy apple. | Asset: Candied apple
Triangle budget: 250
Brief: Round apple of low-poly faceted segments on a short straight stick pointing down, glossy rust-red candy coating with a small ivory collar where the stick enters. Upright, front faces +Z.
Required named parts: apple, candy_coat, stick
```javascript
function buildAsset(TH... |
stage1-train-01413 | prop | I need a low-poly candy bowl. | Asset: Brass candy bowl
Triangle budget: 350
Brief: Shallow faceted brass bowl on a small flared foot, sitting upright; inside, three wrapped candies poke above the rim, each a small twisted-wrapper shape in rust, sage and ivory.
Required named parts: bowl, foot, candy_1, candy_2, candy_3
```javascript
function buildA... |
stage1-train-01414 | prop | I need a low-poly candy cane prop. | Asset: Striped candy cane
Triangle budget: 350
Brief: Upright candy cane standing on the ground: a straight round shaft with a hooked curve at the top bending back toward -Z, striped in alternating ivory and rust bands following the length. Front faces +Z.
Required named parts: shaft, hook, stripe_1, stripe_2, stripe_3... |
stage1-train-01415 | animal | Build a low-poly cane corso dog sitting. | Asset: Sitting cane corso
Triangle budget: 650
Brief: Heavy-set mastiff sitting upright: broad deep chest, thick forelegs planted straight, haunches and hind legs folded on the ground, blocky head with short square muzzle and cropped upright ears, thin tail curled at the base. Coat black, ivory chest patch and small iv... |
stage1-train-01416 | animal | I need a low-poly cane toad. | Asset: Squat cane toad
Triangle budget: 550
Brief: Wide squat toad sitting flat: broad rounded body with a blunt head, two bulging eyes set high on top, short splayed front legs, big folded hind legs tucked at the sides, a few raised wart bumps on the back. Sage body with rust warts, black eyes.
Required named parts: b... |
stage1-train-01417 | tool or gear | I need a low-poly canister stove. | Asset: Camping canister stove
Triangle budget: 400
Brief: Backpacking stove: squat upright gas canister at the bottom, a short neck up to a round burner body, three folding pot-support arms splayed outward at the top, a small brass control knob on the side. Iron body, brass valve, sage canister.
Required named parts: c... |
stage1-train-01418 | architecture | Build a low-poly cannery warehouse. | Asset: Cannery warehouse
Triangle budget: 1050
Brief: Long rectangular cannery building, flat-sided in navy with iron trim, topped by a three-tooth sawtooth roof with ivory clerestory panes facing +Z. Front (+Z) has a raised oak loading dock platform with a big open roller door recessed behind it, plus a small rust ven... |
stage1-train-01419 | container or food | I need a low-poly cannoli. | Asset: Cannoli
Triangle budget: 400
Brief: Cannoli lying horizontally along Z: a crisp golden-brown tube shell, with ivory ricotta filling flush at both open ends, and a few dark chips speckled near the rims. No plate.
Required named parts: shell, filling_front, filling_back, chip_1, chip_2, chip_3
```javascript
funct... |
stage1-train-01420 | prop | Build a low-poly cannon rammer. | Asset: Cannon rammer
Triangle budget: 350
Brief: Artillery rammer lying flat on the ground along Z: long oak shaft with a thick iron rammer head at the front (+Z) end, a brass ferrule band near the butt, and a small iron worm tip at the back end. Slight tilt so both ends rest at y=0.
Required named parts: shaft, rammer... |
stage1-train-01421 | furniture | I need a low-poly cantilever parasol. | Asset: Cantilever parasol
Triangle budget: 650
Brief: Offset patio parasol: heavy square base, short upright post from the base corner, a horizontal cantilever arm reaching out over the empty space (+Z), and a shallow eight-sided canopy hanging from the arm end with a small finial on top. Iron frame with ivory canopy.
... |
stage1-train-01422 | prop | Build a low-poly canvas hammock between two posts. | Asset: Canvas hammock
Triangle budget: 500
Brief: Two upright wooden posts on the ground spaced apart along X, each tied with short ropes to the gathered ends of a sagging ivory canvas sling that dips low in the middle. Front (+Z) faces broadside so the sag reads clearly.
Required named parts: post_left, post_right, ro... |
stage1-train-01423 | container or food | I need a low-poly canvas market bag. | Asset: Canvas market bag
Triangle budget: 350
Brief: Open canvas tote: boxy soft body with a slight outward flare at the rim, visible hollow interior, two arched carry handles rising from the top edge. Ivory canvas with oak-brown straps.
Required named parts: bag_body, rim, handle_left, handle_right
```javascript
func... |
stage1-train-01424 | tool or gear | I need a low-poly canvas panel. | Asset: Stretched canvas panel
Triangle budget: 300
Brief: Painter's canvas panel standing upright on its bottom edge, face toward +Z: a slim oak stretcher frame with ivory canvas stretched across the front and a single diagonal cross-brace on the back; frameless, panel roughly 3:4 portrait, only slightly thicker than t... |
stage1-train-01425 | tool or gear | I need a low-poly rolled canvas bedroll. | Asset: Rolled canvas bedroll
Triangle budget: 400
Brief: A canvas roll lying horizontally along X, cylindrical with a flat spiral end face visible on each side, one strap around each end cinching it and a small brass buckle on the upper strap. Ivory canvas, darkWood strap, brass buckle.
Required named parts: roll, end_... |
stage1-train-01426 | tool or gear | Build a low-poly canvas wall tent. | Asset: Weathered canvas wall tent
Triangle budget: 500
Brief: A-frame wall tent facing +Z: ivory canvas body with short vertical walls and a peaked ridge, door flap on the front, two darkWood front poles and a ridge pole. Sage trim along the eave.
Required named parts: tent_body, door_flap, pole_front_left, pole_front_... |
stage1-train-01427 | plant or nature | I need a low-poly chunk of canyon wall. | Asset: Layered canyon wall chunk
Triangle budget: 650
Brief: A freestanding block of canyon rock: a chunky angular cliff mass with a flat-ish top, two stepped horizontal strata ledges on the front face, and a few small boulders fallen at its foot. Rust and oak banding over darkWood, sitting flush on the ground.
Require... |
stage1-train-01428 | animal | Build a low-poly cape buffalo. | Asset: Heavy cape buffalo
Triangle budget: 850
Brief: Standing cape buffalo facing +Z, with a massive sloping barrel body, low broad head, and short sturdy legs planted at ground level. Wide curved iron horns join at a central boss over the head; coat is black with darkWood hooves and a tufted tail.
Required named part... |
stage1-train-01429 | architecture | Build a low-poly capstan for a harbour dock. | Asset: Dockside capstan
Triangle budget: 500
Brief: Upright winch drum on a wide round base plate, the drum slightly tapering with a brass band near the top and a dark wood cap disc; four handspike bars radiate horizontally from the cap. Front faces +Z, ground at y=0.
Required named parts: base, drum, brass_band, cap, ... |
stage1-train-01430 | vehicle | Build a low-poly car ferry. | Asset: Little car ferry
Triangle budget: 900
Brief: Small flat-deck car ferry, bow facing +Z: navy hull with a slightly raised ivory car deck and low bulwarks along both sides, a boxy iron wheelhouse set aft on the deck with brass window strips, and a single short funnel behind it. A hinged bow ramp folds down toward t... |
stage1-train-01431 | tool or gear | Build a low-poly carabiner. | Asset: Twist-lock carabiner
Triangle budget: 400
Brief: D-shaped carabiner lying flat with the loop in the XY plane, spine on the left and the gate closing the right side. Iron frame with a brass screw-lock sleeve on the gate and a small hinge pin at the bottom corner. Front faces +Z.
Required named parts: spine, gate,... |
stage1-train-01432 | container or food | I need a low-poly caramel apple on a stick. | Asset: Caramel apple
Triangle budget: 350
Brief: Caramel apple standing upright on its wooden stick: round faceted apple body (rust), a glossy brass caramel shell covering the upper two-thirds with a few drips running down, oak stick poking out the top. Stick up, apple centred, front +Z.
Required named parts: apple_bod... |
stage1-train-01433 | vehicle | Build a low-poly caravel sailing ship. | Asset: Small caravel
Triangle budget: 900
Brief: Little explorer caravel resting upright with bow facing +Z: a curved oak hull with raised stern castle, flat deck, two masts (fore shorter, main taller) with ivory square sails, a forward-raked bowsprit, and a stern rudder. Dark wood trim, flat colour sails.
Required nam... |
stage1-train-01434 | container or food | Build a low-poly carbon steel wok. | Asset: Carbon steel wok
Triangle budget: 400
Brief: Round-bottomed wok sitting level, opening upward, dark iron bowl with a slightly flared rim; one long oak-grip handle extending to the right (+X) and a small loop handle opposite (-X), both riveted to the rim. Nothing inside the bowl.
Required named parts: bowl, handl... |
stage1-train-01435 | tool or gear | I need a low-poly card scraper. | Asset: Card scraper
Triangle budget: 250
Brief: Woodworking card scraper standing on edge: a thin rectangular iron blade with rounded top corners and a sharpened burr along the top edge, its lower third gripped in a two-piece oak holder clamped by two brass rivets through the face. Front faces +Z, blade just off the ho... |
stage1-train-01436 | vehicle | Build a low-poly cardboard airplane. | Asset: Cardboard toy airplane
Triangle budget: 600
Brief: Simple handmade glider: a slab-sided fuselage box tapering to a blunt nose, a single flat wing crossing the top as left/right halves with folded-up tips, a triangular tail fin and a flat tailplane at the back, and a two-blade propeller on a short nose hub. Warm ... |
stage1-train-01437 | container or food | I need a low-poly cardboard box of kale. | Asset: Cardboard kale box
Triangle budget: 450
Brief: Open kraft-cardboard box in a slight asym tilt, four flaps folded outward, dark-green kale leaves bunching above the rim. Box walls thin and flat-shaded, kale a cluster of angular leaf blades. Kraft brown walls with sage leaves.
Required named parts: box_walls, box_... |
stage1-train-01438 | container or food | I need a low-poly milk carton. | Asset: Gable-top milk carton
Triangle budget: 350
Brief: Standing gable-top carton, slightly tapered square body, two sloped roof panels meeting at a vertical fin seam along the ridge, front face +Z. Ivory body with a navy band near the base and a brass cap plug on the gable.
Required named parts: body, gable_front, ga... |
stage1-train-01439 | container or food | I need a low-poly cardboard box of watermelons. | Asset: Cardboard watermelon box
Triangle budget: 500
Brief: Open-topped cardboard crate with slightly flared side panels and folded corner flaps, sitting flat on the ground; two sage-green watermelons rest inside with their striped tops peeking above the rim. Crate in oak, melons sage with darkWood stripe bands.
Requir... |
stage1-train-01440 | architecture | Build a low-poly tilted lattice grid panel for architecture. | Asset: Leaning lattice grid screen
Triangle budget: 550
Brief: Architectural grid screen: a shallow rectangular frame tilted back a few degrees on two stub feet at y=0, filled with a flat lattice of three vertical and two horizontal slats, all coplanar. Oak frame and slats with iron fastener caps at the rail ends.
Requ... |
stage1-train-01441 | vehicle | Build a low-poly cargo airship. | Asset: Cargo airship
Triangle budget: 750
Brief: Blimp-style freighter: fat rounded envelope pointing +Z, a squat ivory cargo gondola slung directly beneath it by short struts, and a tail cluster of three fins (left, right, top) at the back. One iron engine pod under the tail with a spinning propeller, brass trim ring ... |
stage1-train-01442 | vehicle | Build a low-poly cargo bike. | Asset: Cargo bicycle
Triangle budget: 800
Brief: Front-loader cargo bicycle facing +Z: navy frame with a low step-through bar, tall handlebars, saddle at the rear, two iron spoked wheels, and an oak open cargo box mounted low between the handlebars and the front wheel on a small support frame.
Required named parts: fra... |
stage1-train-01443 | fantasy or game | I need a low-poly cargo container for a fantasy game. | Asset: Ribbed cargo container
Triangle budget: 550
Brief: Front-loading cargo container standing on the ground: a rectangular steel box with vertical ribs along both long sides, twin doors on the +Z face with a cross latch bar, and two short skid feet beneath. Iron panels with brass latch hardware and darkWood corner p... |
stage1-train-01444 | vehicle | Build a low-poly cargo landing pod. | Asset: Dented cargo landing pod
Triangle budget: 550
Brief: Upright rounded cargo pod: a tapered drum body with a domed top, standing on four splayed legs with flat pads at y=0. Front round hatch with an ivory rim and dark recess, a rust lower skirt band, and a small brass vent on top.
Required named parts: body, hatch... |
stage1-train-01445 | fantasy or game | Build a low-poly cargo loading bot. | Asset: Stubby cargo loading bot
Triangle budget: 700
Brief: Squat boxy loader bot facing +Z: chunky iron chassis on two rubberised treads, small brass-lensed sensor head set low between shoulders, two forward-reaching lifter arms with forked prongs cradling a slatted crate, rust accents and navy panel. All parts touch.... |
stage1-train-01446 | vehicle | Build a low-poly cargo longtail bike. | Asset: Cargo longtail bike
Triangle budget: 900
Brief: Longtail cargo bicycle facing +Z: two large spoked wheels, low step-through frame with a long rear deck carrying a shallow slatted cargo box, upright handlebar and small saddle. Iron frame, oak deck and box, black tyres, brass bell.
Required named parts: frame, fro... |
stage1-train-01447 | vehicle | Build a low-poly cargo orbital ferry. | Asset: Cargo orbital ferry
Triangle budget: 900
Brief: Squat hauler facing +Z: boxy ivory hull with a navy forward cockpit wedge, a large rust cargo container strapped underneath the spine, two iron engine nacelles on stubby side pylons at the rear, three splayed landing struts down to y=0, brass trim rims.
Required na... |
stage1-train-01448 | vehicle | Build a low-poly cargo plane. | Asset: Boxy cargo plane
Triangle budget: 700
Brief: Chunky cargo plane: thick boxy fuselage with blunt nose facing +Z, high-mounted straight wings left and right, two underslung engine pods, single swept tail fin with horizontal tailplane, small wheels under the nose and wings. Sage body with ivory and iron accents.
Re... |
stage1-train-01449 | vehicle | I need a low-poly cargo shuttle. | Asset: Rusty cargo shuttle
Triangle budget: 900
Brief: Chunky cargo shuttle facing +Z: boxy ivory hull, small forward cockpit canopy, two stubby side fins, a rust cargo pod slung beneath the belly, twin iron engine nozzles at the rear, four short landing skids touching the ground.
Required named parts: hull, cockpit_ca... |
stage1-train-01450 | vehicle | Build a low-poly cargo craft with a solar sail. | Asset: Cargo solar sail craft
Triangle budget: 750
Brief: Sitting on its skids at y=0, nose toward +Z: a blocky iron hull with a flat brass-trimmed cargo pod slung on each side, a short mast rising from the hull's mid-deck, and one broad ivory sail panel swept back between mast top and a diagonal boom, with a small ven... |
stage1-train-01451 | vehicle | Build a low-poly cargo van. | Asset: Boxy cargo van
Triangle budget: 950
Brief: Compact boxy cargo van facing +Z: tall slab-sided body with a short sloped-nose cab, dark windshield and small side windows, four chunky black wheels under iron arches, iron front and rear bumpers, two ivory headlights.
Required named parts: body, windshield, wheel_fron... |
stage1-train-01452 | animal | Build a low-poly caribou. | Asset: Standing caribou
Triangle budget: 900
Brief: Standing caribou facing +Z: barrel body on four straight legs, thick neck rising to a lowered head with a short muzzle, two branched antlers sweeping up and forward, small tail. Warm brown body, ivory muzzle and chest ruff, dark brown antlers and hooves.
Required name... |
stage1-train-01453 | plant or nature | I need a low-poly carnelian stone. | Asset: Carnelian stone
Triangle budget: 200
Brief: A single chunky pebble resting on the ground, faceted into irregular planar sides with a broad flat-ish top and a wider base, slightly longer than tall. Warm rust-orange body with darker shaded facets, front face toward +Z.
Required named parts: stone_main, stone_chip
... |
stage1-train-01454 | prop | Build a low-poly carousel spinner prop. | Asset: Toy carousel spinner
Triangle budget: 900
Brief: Miniature carousel: round platform disc at ground level, central pole rising to a peaked canopy cone with a small brass finial on top. Four small horses mounted around the platform edge on short poles, all facing outward. Ivory and sage canopy with oak platform an... |
stage1-train-01455 | bird, sea creature or bug | I need a low-poly carpenter ant. | Asset: Carpenter ant
Triangle budget: 600
Brief: Carpenter ant facing +Z: blocky head with small mandibles and two elbowed antennae, a narrow waist into a rounded thorax, and a large teardrop gaster behind it; six thin splayed legs (front legs shortest, hind longest) all touching the ground. Glossy black chitin with da... |
stage1-train-01456 | tool or gear | Build a low-poly carpenter's level. | Asset: Carpenter's level
Triangle budget: 350
Brief: Long rectangular beam with chamfered corners laid flat along Z, three ivory bubble vials inset in the top face (centre plus two ends), brass end caps. Oak body, iron vial frames.
Required named parts: body, vial_center, vial_left, vial_right, cap_left, cap_right
```... |
stage1-train-01457 | vehicle | Build a low-poly cargo carrier van. | Asset: Little cargo carrier
Triangle budget: 700
Brief: Compact delivery van facing +Z: short cab with sloped ivory windshield and a tall boxy cargo body behind, flat roof, four black wheels tucked under, thin brass bumper. Navy bodywork.
Required named parts: cargo_body, cab, windshield, wheel_front_left, wheel_front_... |
stage1-train-01458 | fantasy or game | Build a low-poly carrion crawler. | Asset: Carrion crawler
Triangle budget: 850
Brief: Pale grub-like creeping worm: four tapering body segments arching low over the ground, head at +Z ringed by four short drooping tentacles, two pairs of stubby legs under the front segments. Ivory hide, rust tentacles, dark underside, tiny black eyes.
Required named par... |
stage1-train-01459 | bird, sea creature or bug | I need a low-poly crow model. | Asset: Carrion crow
Triangle budget: 550
Brief: Perched crow facing +Z: plump oval body, upright head with a heavy pointed beak, two folded wings lying along the flanks, wedge tail angled down and back, two short legs gripping with splayed toes. Glossy black plumage with a slightly darker beak.
Required named parts: bo... |
stage1-train-01460 | container or food | I need a low-poly carrot cake. | Asset: Carrot cake
Triangle budget: 400
Brief: Round carrot cake: squat oak-brown sponge cylinder, ivory cream cheese frosting spread on top with a piped rim around the edge, one small rust carrot garnish standing on top. Front faces +Z, flat on ground.
Required named parts: cake_body, frosting_top, frosting_rim, carro... |
stage1-train-01461 | plant or nature | I need a low-poly carrot. | Asset: Carrot root
Triangle budget: 350
Brief: Upright carrot standing on its pointed tip at ground level, widening to a flat crown, faceted 8-sided body with a slight lean. Three sage leaf sprays splay up and out from the crown; rust root with a small ivory shoulder ring.
Required named parts: root, crown_ring, leaf_1... |
stage1-train-01462 | animal | I need a low-poly cartoon bull. | Asset: Chunky cartoon bull
Triangle budget: 700
Brief: Standing bull with an oversized blocky head lowered slightly on a stubby rust body, four short thick legs, curved ivory horns and a broad pale muzzle. Small ears, a thin tail with a dark tuft; hooves darkWood, face +Z.
Required named parts: body, head, snout, horn_... |
stage1-train-01463 | animal | Build a low-poly cartoon cat. | Asset: Plump cartoon cat
Triangle budget: 650
Brief: Sitting cartoon cat facing +Z: rounded upright body with wide haunches, oversized head on a short neck, two triangular ears, a small ivory muzzle, and a thick tail curling around the right side. Sage coat, ivory muzzle, black eyes, small front paws resting on the gro... |
stage1-train-01464 | animal | I need a low-poly cartoon chicken. | Asset: Plump cartoon chicken
Triangle budget: 450
Brief: Round plump hen standing with head up and short tail feathers at the back, a rust comb on top, small brass beak, two stubby legs flat on the ground. Ivory body with rust tail and comb. Faces +Z.
Required named parts: body, head, comb, beak, tail, leg_left, leg_ri... |
stage1-train-01465 | animal | Build a low-poly cartoon cow with a big head and stubby legs. | Asset: Chunky cartoon cow
Triangle budget: 800
Brief: Standing cartoon cow facing +Z: stocky ivory body with flat black patch panels, oversized rounded head with blocky muzzle, small upright ears, short brass horns, four stubby legs with black hooves, a rust udder under the rear belly, and a thin tail with black tuft a... |
stage1-train-01466 | animal | I need a low-poly cartoon dog. | Asset: Cartoon dog
Triangle budget: 650
Brief: Chunky cartoon dog standing squarely facing +Z: big rounded head with a short snout, two floppy ears hanging beside the cheeks, stubby four legs, thick body, and a short curled tail up at the back. Oak body with darkWood ears and tail tip, ivory muzzle and chest patch, bla... |
stage1-train-01467 | animal | I need a low-poly cartoon donkey. | Asset: Cartoon donkey
Triangle budget: 700
Brief: Chunky cartoon donkey standing four-square, big head angled slightly up, long upright ears, pale muzzle, stubby tail with a tuft. Slate-grey (iron) coat, ivory muzzle and tuft, darkWood hooves and mane ridge. Face +Z.
Required named parts: body, head, ear_left, ear_righ... |
stage1-train-01468 | animal | I need a low-poly cartoon goat. | Asset: Cartoon goat kid
Triangle budget: 700
Brief: Chibi goat standing squarely facing +Z: stubby ivory body, oversized head with two short curved darkWood horns sweeping back, upright oval ears, a pointed darkWood beard under the chin, four short legs with dark hooves, small upright tail. Front/top-heavy cartoon prop... |
stage1-train-01469 | animal | Build a low-poly cartoon goose. | Asset: Cartoon goose
Triangle budget: 700
Brief: Upright plump goose: egg-shaped ivory body leaning back, long curved neck rising forward, small head with an orange wedge bill and a low angry brow, spread webbed orange feet flat on the ground, short fanned tail behind. Facing +Z.
Required named parts: body, neck, head,... |
stage1-train-01470 | animal | Build a low-poly cartoon sheep. | Asset: Round cartoon sheep
Triangle budget: 550
Brief: Chubby sheep standing on four short legs, big rounded ivory fleece body of chunky planes, small dark head poking forward (+Z) with little floppy ears, short tail puff at the back. Face +Z, hooves at y=0.
Required named parts: fleece_body, head, ear_left, ear_right,... |
stage1-train-01471 | animal | Build a low-poly carved wooden badger. | Asset: Carved badger
Triangle budget: 650
Brief: Badger standing on all fours facing +Z: long low wedge body, broad head with tapered snout, small rounded ears, short sturdy legs, stubby tail at the back. Carved-toy look in oak body, ivory head with darkWood face stripes and black paws.
Required named parts: body, head... |
stage1-train-01472 | furniture | Build a low-poly carved cabinet. | Asset: Carved oak cabinet
Triangle budget: 550
Brief: Upright two-door cabinet facing +Z: boxy oak carcass taller than wide, recessed darkWood door fronts with a raised carved diamond panel each, overhanging cornice at top, small bracket feet, two brass ring handles.
Required named parts: carcass, cornice, door_left, d... |
stage1-train-01473 | furniture | Build a low-poly carved wooden coffer. | Asset: Carved oak coffer
Triangle budget: 650
Brief: Closed chest facing +Z: boxy oak body with a slightly domed hinged lid, a recessed darkWood carved front panel, two iron bands wrapping front and lid, and a small brass lock plate; sits on four short feet.
Required named parts: body, lid, panel_carved, band_left, ban... |
stage1-train-01474 | fantasy or game | I need a low-poly carved rune stone. | Asset: Carved rune stone
Triangle budget: 500
Brief: Upright weathered standing stone, roughly octagonal slab tapering to a chipped angled top, leaning a few degrees. Two recessed rune glyphs cut into the front face, plus a sage moss patch creeping up the lower left side. Iron-grey stone, near-black grooves.
Required n... |
stage1-train-01475 | tool or gear | I need a low-poly carving gouge. | Asset: Carving gouge
Triangle budget: 350
Brief: Hand gouge lying at rest along the Z axis, wooden handle at the back (-Z) and the U-channel blade pointing forward (+Z), resting on the ground. Oak handle, brass ferrule ring, iron blade with a curved scoop and beveled cutting edge.
Required named parts: handle, ferrule,... |
stage1-train-01476 | plant or nature | Build a low-poly cashew apple on a branch. | Asset: Cashew apple on branch
Triangle budget: 400
Brief: Short woody branch running diagonally, with a plump rust-red cashew apple hanging at its end and the small kidney-shaped nut dangling below the apple on a stub. Two sage leaves on the branch behind the fruit.
Required named parts: branch, leaf_1, leaf_2, apple, ... |
stage1-train-01477 | plant or nature | I need a low-poly cassava root. | Asset: Fresh cassava root
Triangle budget: 400
Brief: Cassava tuber cluster lying horizontally along +Z on the ground: one thick tapered main root, two shorter side roots angled off the back half, and a short cut stem stub at the rear (-Z) end with a couple of sage leaves. Bark oak-brown with darker wood banding, ivory... |
stage1-train-01478 | container or food | I need a low-poly casserole carrier bag. | Asset: Insulated casserole carrier
Triangle budget: 400
Brief: Rectangular insulated carrier bag, flat top lid flap with a small brass buckle at the front (+Z), two arching fabric handles rising from the sides, a slim strap running under the bag. Navy fabric with brass hardware, sitting squarely on the ground.
Required... |
stage1-train-01479 | container or food | I need a low-poly casserole dish. | Asset: Cast-iron casserole dish
Triangle budget: 500
Brief: Round shallow casserole pot with a thick rim, two loop side handles at the left and right, and a low domed lid topped by a small knob; body and lid iron, interior ivory, knob brass. Resting on the ground, front toward +Z.
Required named parts: body, lid, knob,... |
stage1-train-01480 | container or food | I need a low-poly casserole dish with a lid. | Asset: Enamel casserole dish
Triangle budget: 400
Brief: Round lidded casserole: wide shallow rust-enamel basin with a slightly flared ivory rim, two small loop handles opposite each other on the sides, and a shallow domed ivory lid topped with a brass knob. Front faces +Z, sits flat at y=0.
Required named parts: dish_... |
stage1-train-01481 | container or food | Build a low-poly casserole dish with lid and handles. | Asset: Cast-iron casserole tote
Triangle budget: 400
Brief: Round Dutch oven: squat tapered pot body with a slight foot, two stubby loop handles on opposite sides, shallow domed lid seated on the rim with a small round knob on top. Iron body, ivory lid, brass knob.
Required named parts: pot_body, lid, knob, handle_left... |
stage1-train-01482 | prop | Build a low-poly cassette player. | Asset: Portable cassette player
Triangle budget: 500
Brief: Chunky rectangular handheld cassette player lying on its long edge with front facing +Z: iron body with an ivory cassette window centered on the front, a row of four small brass transport buttons below it, and a short carrying strap handle over the top. Black ... |
stage1-train-01483 | prop | I need a low-poly cassette tape. | Asset: Cassette tape
Triangle budget: 350
Brief: Compact cassette standing upright on its long edge, front facing +Z: flat rectangular black shell with slightly bevelled corners, an ivory label panel across the upper front, a small dark window strip below showing two reel hubs, and a shallow notch along the bottom edge... |
stage1-train-01484 | bird, sea creature or bug | Build a low-poly cassowary. | Asset: Cassowary
Triangle budget: 700
Brief: Standing cassowary facing +Z: heavy black-feathered body sloping down to a short tail, upright blue-grey neck rising to a small head with a tall dark horn casque running back, hanging rust-red wattle at the throat, two stout iron-grey legs with three-toed feet on the ground.... |
stage1-train-01485 | architecture | I need a low-poly cast iron bollard. | Asset: Cast iron bollard
Triangle budget: 300
Brief: Stout cylindrical bollard standing at the quay: wide flanged base ring, slightly tapered octagonal shaft, raised collar band near the top, and a rounded domed cap. Iron with a brass collar band.
Required named parts: base_flange, shaft, collar_band, dome_cap
```java... |
stage1-train-01486 | tool or gear | I need a low-poly cast-iron dutch oven. | Asset: Campfire dutch oven
Triangle budget: 400
Brief: Upright pot: squat thick-walled iron body with slightly flared rim, flat domed iron lid seated on top, small brass knob at lid centre, two short loop side handles. Iron with brass knob.
Required named parts: body, lid, knob, handle_left, handle_right
```javascript... |
stage1-train-01487 | container or food | I need a low-poly cast iron fruit bowl. | Asset: Cast iron fruit bowl
Triangle budget: 450
Brief: Shallow cast iron bowl with a thick flared rim and a small round foot, sitting upright; three simple round fruits nestled inside, two rust-red and one sage green, slightly proud of the rim. Iron body with brass foot ring.
Required named parts: bowl_body, rim, foot... |
stage1-train-01488 | architecture | Build a low-poly castle chapel. | Asset: Castle chapel
Triangle budget: 900
Brief: Small stone chapel: rectangular nave with steep gabled roof, a square bell tower attached to the front corner rising above the ridge, topped by a short pyramidal spire; arched door on the front face, a tall narrow window on each side wall. Pale ivory stone with iron-grey... |
stage1-train-01489 | architecture | Build a low-poly castle gate. | Asset: Castle gate
Triangle budget: 800
Brief: Twin square stone towers flank a central arched gateway, each tower capped with crenellations; a pair of dark timber doors fill the arch, with a low threshold step. Ivory stone, darkWood doors, iron studs; front faces +Z, all parts touching ground or towers.
Required named... |
stage1-train-01490 | architecture | Build a low-poly castle keep. | Asset: Stone castle keep
Triangle budget: 700
Brief: Square stone keep, slightly tapered walls, crenellated parapet ring at the top, arched dark doorway centred on the front (+Z), two narrow slit windows above it. Flat stone grey with darkWood door and iron accents.
Required named parts: tower_body, parapet, merlons, d... |
stage1-train-01491 | architecture | Build a low-poly castle kitchen. | Asset: Castle kitchen hearth nook
Triangle budget: 850
Brief: Stone hearth against the back (-Z) with a dark arched fire opening, a slender chimney stack above it, and an iron crane arm swinging a round cauldron into the fire mouth; a heavy oak worktable butts against the hearth front, its plank top carrying a small iv... |
stage1-train-01492 | architecture | Build a low-poly castle wall segment. | Asset: Toy castle wall
Triangle budget: 500
Brief: Straight stone rampart standing on the ground, slightly battered at the base, with a flat walkway on top and four evenly spaced square merlons along the front edge. Iron-grey stone with a darker base course.
Required named parts: wall_body, base_course, walkway, merlon... |
stage1-train-01493 | vehicle | Build a low-poly catamaran sailboat. | Asset: Small catamaran
Triangle budget: 700
Brief: Twin slim hulls pointing +Z, joined by two crossbeams and a flat deck bridging them, single mast stepped on the deck centre with a triangular sail set aft of it, plus a small rudder at each hull stern. Ivory deck and sail, navy hulls, oak mast.
Required named parts: hu... |
stage1-train-01494 | prop | Build a low-poly catcher's mitt. | Asset: Worn catcher's mitt
Triangle budget: 400
Brief: Thick padded catcher's mitt standing palm-up toward +Z: a rounded segmented shell body, a thick thumb wedge on the left, a laced webbing panel bridging thumb to the finger edge, and a short ivory-piped wrist cuff at the back (-Z). Oak leather with darkWood trim and... |
stage1-train-01495 | bird, sea creature or bug | Build a low-poly cattle egret standing in a field. | Asset: Cattle egret
Triangle budget: 500
Brief: Standing egret in three-quarter pose, slender upright body on two long thin legs, S-curved neck rising to a small head with a straight pointed bill and a short crest, folded pointed wings along the back. Ivory plumage, brass bill, navy legs with black feet, facing +Z.
Req... |
stage1-train-01496 | plant or nature | I need a low-poly cauliflower. | Asset: Cauliflower head
Triangle budget: 500
Brief: Upright cauliflower: short ivory stalk at the base, a domed ivory curd head made of a few clustered rounded lobes, ringed by four broad sage leaves cupping the base and curling outward. Sits with stalk at ground, curd facing up.
Required named parts: stalk, curd, flor... |
stage1-train-01497 | tool or gear | I need a low-poly caulk gun. | Asset: Caulk gun
Triangle budget: 500
Brief: Hand caulk gun lying level with the nozzle pointing +Z: a half-cradle skeleton frame holding the tube, a rear pistol grip angled down, a curved trigger lever in front of it, and a plunger rod with a round thumb plate sticking out the back (-Z). Iron frame and rod, darkWood g... |
stage1-train-01498 | tool or gear | Build a low-poly cavalry lance. | Asset: Weathered cavalry lance
Triangle budget: 300
Brief: Cavalry lance standing upright, leaning slightly, butt on the ground at y=0 and point up. Long tapered oak shaft, iron point at the top, small conical iron vamplate (hand guard) low on the shaft, brass butt cap, and a small sage pennant near the tip. No hand, n... |
stage1-train-01499 | fantasy or game | I need a low-poly cave cyclops. | Asset: Hunched cave cyclops
Triangle budget: 550
Brief: Stocky hunched cyclops standing on splayed legs, long arms hanging low, one oversized round eye centred in the brow, single blunt horn and jutting jaw. Sage skin, ivory eye with black pupil, a darkWood club held in the right hand. Faces +Z.
Required named parts: b... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.