id
stringlengths
18
18
category
stringclasses
10 values
prompt
stringlengths
21
68
response
stringlengths
1.18k
11.4k
stage1-train-01800
container or food
I need a low-poly condensed milk tin.
Asset: Condensed milk can Triangle budget: 300 Brief: Small squat cylindrical tin standing upright, slightly wider than tall, with a rolled rim at top and bottom; a plain ivory paper label band wraps the middle with a thin brass ring above and below, no text. Iron lid. Required named parts: can_body, rim_top, rim_botto...
stage1-train-01801
container or food
I need a low-poly condiment caddy.
Asset: Wooden condiment caddy Triangle budget: 500 Brief: Small oak carrier: low rectangular tray with a rounded arch handle rising from the middle of two opposite sides, holding three upright bottles — two shorter ivory shakers with iron caps flanking a taller navy oil bottle with a brass stopper. Tray sits flat on th...
stage1-train-01802
container or food
I need a low-poly condiment sachet.
Asset: Condiment packet Triangle budget: 300 Brief: Small flat sauce sachet standing slightly propped: rectangular pillow body with two pinched crimped seals top and bottom, one corner nipped as a tear notch. Ivory foil with a rust label band across the front. Required named parts: packet_body, seal_top, seal_bottom, l...
stage1-train-01803
architecture
Build a low-poly condo podium tower.
Asset: Condo podium tower Triangle budget: 1000 Brief: Condo block: a wide two-storey podium at the ground with a recessed glass entrance and canopy on the +Z face, and a narrower slab tower rising from the back half of the podium, its front face stacked with three shallow balcony slabs. Pale ivory tower and sage podiu...
stage1-train-01804
furniture
I need a low-poly cone pendant lamp.
Asset: Cone pendant lamp Triangle budget: 350 Brief: Hanging pendant: small dark ceiling canopy at the top, thin straight cord dropping to a wide shallow cone shade (open bottom, ivory outside, darker inside), a brass rim ring at the mouth, and a small glowing bulb peeking below the rim. Axis vertical, all parts connec...
stage1-train-01805
architecture
Build a low-poly trullo house.
Asset: Cone-roofed trullo Triangle budget: 550 Brief: Small round trullo: cylindrical ivory-whitewashed stone drum with a tall grey conical stone roof, a dark wooden door facing +Z, one tiny square window, and a small chimney stub on the cone. Broad base sitting flat on the ground, roof apex centred. Required named par...
stage1-train-01806
bird, sea creature or bug
Build a low-poly cone shell.
Asset: Banded cone shell Triangle budget: 350 Brief: Cone snail shell standing upright on its wide end: broad lower whorl, a stacked set of narrowing spiral tiers rising to a sharp point, with an ivory lip outlining the opening at the base front. Ivory with rust spiral banding. Required named parts: body_whorl, spire_1...
stage1-train-01807
architecture
Build a low-poly cone-roofed hut.
Asset: Thatched round hut Triangle budget: 400 Brief: Round hut: short cylindrical ivory-plastered wall drum sitting on the ground, a tall steep conical thatch roof overhanging the walls, one plain darkWood door on the +Z side. No plinth, all parts touching. Required named parts: walls, roof, door ```javascript functi...
stage1-train-01808
furniture
I need a low-poly conference speakerphone.
Asset: Conference speakerphone Triangle budget: 300 Brief: Desk speakerphone: low squat puck base, circular speaker grill on top slightly domed, small flat control pad at the front (+Z) with a brass mute button, thin status ring around the grill. Black and iron body. Required named parts: base, speaker_grill, control_p...
stage1-train-01809
prop
I need a low-poly conga drum.
Asset: Conga drum Triangle budget: 450 Brief: Upright conga: tall barrel body widest near the top, tapering to a narrower foot, ivory drumhead stretched over the top under a brass rim hoop, three brass tuning lugs spaced around the side, small dark foot ring at ground level. Front faces +Z. Required named parts: drum_b...
stage1-train-01810
plant or nature
I need a low-poly conglomerate rock.
Asset: Conglomerate boulder Triangle budget: 400 Brief: Squat rounded boulder resting flat on the ground, wider than tall, with a lumpy faceted surface and several rounded pebbles embedded proud of the surface in contrasting tones. Main mass iron grey, pebbles in ivory, rust and brass. No plinth; all pebbles half-sunk ...
stage1-train-01811
plant or nature
Build a low-poly conglomerate boulder.
Asset: Conglomerate rock block Triangle budget: 500 Brief: A chunky rounded boulder of dark grey-brown matrix rock with several rounded pebbles of contrasting colours half-embedded in its surface, clustered irregularly so it reads as conglomerate. Front faces +Z, flat bottom sitting at y=0. Required named parts: rock_b...
stage1-train-01812
plant or nature
Build a low-poly conglomerate rock tower.
Asset: Conglomerate rock tower Triangle budget: 500 Brief: A tapering column of conglomerate rock standing upright: three stacked, slightly offset drum segments narrowing toward a blunt flat top, with a few rounded pebbles bulging from the matrix. Grey-blue iron stone with ivory and oak pebbles. Required named parts: t...
stage1-train-01813
vehicle
Build a low-poly container flatcar.
Asset: Container flatcar Triangle budget: 800 Brief: Rail flatcar seen with length along Z: low flat deck with thin side sills, a ribbed box container sitting centred on top, two bogies underneath each carrying two wheels, small couplers at both ends. Navy container and iron underframe on darkWood deck. Required named ...
stage1-train-01814
vehicle
Build a low-poly container ship.
Asset: Toy container ship Triangle budget: 800 Brief: Toy freighter with the pointed bow facing +Z: a long flat-decked hull with a raised bulwark rim, three blocky stacks of containers along the deck, and a small ivory bridge superstructure with a funnel at the stern (-Z). Navy hull, rust and iron container blocks with...
stage1-train-01815
vehicle
Build a low-poly continuous miner machine.
Asset: Compact continuous miner Triangle budget: 900 Brief: Tracked mining machine facing +Z: two low dark treaded tracks, boxy body between them, a forward boom angled up carrying a wide rotating cutting drum with conical picks, a short rear conveyor arm (navy), and a small iron cab with ivory window on the left side....
stage1-train-01816
furniture
Build a low-poly convection oven.
Asset: Countertop convection oven Triangle budget: 450 Brief: Boxy countertop oven facing +Z: iron cabinet, dark glass door panel on the front with a brass bar handle, narrow control panel at the top with one knob and vent slots, four short feet. Front-loading, door hinged at the bottom. Required named parts: cabinet, ...
stage1-train-01817
architecture
I need a low-poly convention center building.
Asset: Compact convention center Triangle budget: 1000 Brief: Wide rectangular hall with a glazed sloped atrium front facing +Z, a flat overhanging roof band, and a recessed double-door entrance; a smaller side wing balances it. Ivory and iron walls with sage glass, darkWood trim. Required named parts: main_hall, side_...
stage1-train-01818
architecture
Build a low-poly conveyor gallery.
Asset: Elevated conveyor gallery Triangle budget: 900 Brief: Long enclosed conveyor gallery running along X, a flat-sided box with slightly pitched roof and open ends, held ~2 units up on two pairs of splayed trestle legs; a continuous belt deck runs the length of the box floor. Dark iron frame with oak belt and navy p...
stage1-train-01819
bird, sea creature or bug
Build a low-poly convict cichlid.
Asset: Convict cichlid Triangle budget: 500 Brief: Deep-bodied cichlid facing +Z, standing just above the ground on its lower fins: tall laterally compressed body with six vertical black bars over ivory, spiny dorsal fin running along the back, fan-shaped tail fin, two small pectoral fins at the sides, round black eye ...
stage1-train-01820
container or food
I need a low-poly cookie tin.
Asset: Round cookie tin Triangle budget: 350 Brief: Short cylindrical tin standing upright, slightly domed lid seated on a raised rim, a small brass knob on top. Iron body with brass lid band and rim. Required named parts: body, lid, rim, knob ```javascript function buildAsset(THREE) { const group = new THREE.Group(...
stage1-train-01821
container or food
I need a low-poly cooling rack.
Asset: Wire cooling rack Triangle budget: 300 Brief: Rectangular wire cooling rack: a thin iron outer frame with parallel bars running across the middle, standing on four short bent legs that touch the ground. Small and flat, wider than deep. Required named parts: frame, bar_1, bar_2, bar_3, bar_4, leg_front_left, leg_...
stage1-train-01822
container or food
Build a low-poly copper apple bin.
Asset: Copper apple bin Triangle budget: 500 Brief: Tapered copper tub, wider at the open top than the base, with a rolled rim band and two small loop handles on left and right sides. A mound of low-poly apples pokes above the rim, resting inside the tub. Copper in rust, rim and handles in brass, apples in rust and sag...
stage1-train-01823
bird, sea creature or bug
I need a low-poly copper birdbath.
Asset: Copper birdbath Triangle budget: 400 Brief: Pedestal birdbath: wide shallow copper bowl with a raised rim, a slender tapered stem, and a stepped round foot on the ground; a flat pale water disc sits recessed inside the bowl. Warm copper tones with a darker iron base. Required named parts: base, stem, bowl, rim, ...
stage1-train-01824
container or food
I need a low-poly copper cocktail mug.
Asset: Copper cocktail cup Triangle budget: 400 Brief: Moscow mule style cup: slightly tapered eight-sided body standing upright, rounded brass rim band at the top, a curved C-shaped handle on the right (+X) side, small flat foot ring underneath. Rust-copper body with brass accents. Required named parts: cup_body, rim_...
stage1-train-01825
plant or nature
Build a low-poly copper ore rock.
Asset: Copper ore rock Triangle budget: 250 Brief: Chunky angular boulder resting on the ground, faceted with sharp planar cuts, dark iron-grey stone with rust and brass copper veins across two faces, a couple of small attached nuggets at the base. No base plinth. Required named parts: rock_body, ore_vein_1, ore_vein_2...
stage1-train-01826
furniture
I need a low-poly copper pendant lamp.
Asset: Copper pendant lamp Triangle budget: 350 Brief: Hanging pendant: wide dome shade in copper (rust) opening downward, thin brass rim at the shade mouth, ivory bulb globe tucked inside, slim dark cord rising from the dome crown to a small flat canopy disc at the top. Required named parts: shade, rim, bulb, cord, ca...
stage1-train-01827
plant or nature
I need a low-poly copper plant pot with a little plant in it.
Asset: Copper plant pot Triangle budget: 450 Brief: Squat tapered copper pot with a rolled rim, dark soil surface just below the rim, and a small houseplant: three short stems each ending in a flat pointed leaf, leaves fanning outward and slightly up. Copper body, darkWood soil, sage foliage. Required named parts: pot,...
stage1-train-01828
fantasy or game
I need a low-poly copper still for a fantasy game.
Asset: Copper still Triangle budget: 700 Brief: Alembic still: squat bulbous copper pot on a low iron stand, a swan-neck pipe rising from the pot's domed lid and curving over to drop into a barrel-like condenser at its side. Rust copper body, brass bands, darkWood and iron supports, all parts touching. Required named p...
stage1-train-01829
furniture
Build a low-poly copper stockpot.
Asset: Copper stockpot Triangle budget: 450 Brief: Wide cylindrical stockpot, slightly tapering to a flat base, with a raised brass rim, a domed lid seated on top, a small brass knob at the lid centre, and two short loop handles opposite each other on the sides. Copper body in rust with brass trim. Required named parts...
stage1-train-01830
container or food
I need a small low-poly sugar scoop.
Asset: Copper sugar scoop Triangle budget: 300 Brief: Small scoop lying tilted with its rounded bowl resting on the ground toward +Z and a short handle rising back toward -Z. Shallow rounded bowl, one flat pouring lip at the front, a slim tapered handle with a small brass ring at its end. Copper-rust bowl with oak hand...
stage1-train-01831
container or food
I need a low-poly copper tankard.
Asset: Copper tankard Triangle budget: 400 Brief: Short cylindrical tankard with a slightly tapered body, standing flat on the ground; a brass rim band at the top and a brass band near the base, plus a big C-shaped handle on the right (+X) curving out and down to mid-body. Body in flat copper #b87333, bands brass. Requ...
stage1-train-01832
container or food
Build a low-poly copper jug.
Asset: Copper water jug Triangle budget: 450 Brief: Upright jug: bulbous rounded belly tapering into a short narrow neck, small flared foot ring at the ground, a pinched pouring lip at the front of the rim, and a single C-shaped handle looping from the rim down to mid-belly at the back. Copper body with a brass rim ban...
stage1-train-01833
animal
Build a low-poly coral fossil.
Asset: Coral fossil Triangle budget: 350 Brief: A chunky iron-grey rock slab lying flat on the ground with a fanning coral skeleton embedded in it, in ivory bone colour: a short trunk rising from the rock and splitting into three tapering branches, tips slightly rounded, all ridges planar. The coral leans up and faces ...
stage1-train-01834
bird, sea creature or bug
I need a low-poly coral fragment.
Asset: Stubby branch coral Triangle budget: 500 Brief: A chunk of branching coral standing upright on its broken base at y=0: thick main stem splitting into three stubby rounded arms of unequal height that fork once more near the tips. Rust body with paler ivory tips. Required named parts: main_stem, branch_left, branc...
stage1-train-01835
bird, sea creature or bug
Build a low-poly coral head.
Asset: Rusty coral head Triangle budget: 500 Brief: A lumpy brain-coral dome sitting on a short stubby stalk, with three rounded branching lobes of different heights sprouting from the top, all fused together. Rust-coloured body with ivory tips on the lobes. Front faces +Z. Required named parts: dome, stalk, lobe_1, lo...
stage1-train-01836
bird, sea creature or bug
I need a low-poly coral polyp cluster.
Asset: Coral polyp cluster Triangle budget: 700 Brief: A cluster of three rust-coloured tubular polyps of different heights growing from one low encrusting root mass on the ground, each topped with an ivory ring of short tapered tentacles around a dark mouth disc. Stalks lean slightly apart, front faces +Z. Required na...
stage1-train-01837
plant or nature
I need a low-poly chunk of coral rock.
Asset: Coral rock chunk Triangle budget: 400 Brief: A squat chunky rock mass sitting on the ground, a second smaller lobe fused to its side, and three stubby forked coral branches sprouting from the top, all physically joined. Rust-orange coral body with ivory tips on the branches. Required named parts: main_rock, lobe...
stage1-train-01838
animal
Build a low-poly coral snake.
Asset: Banded coral snake Triangle budget: 450 Brief: Slithering snake seen from above: gently S-curved body of four connected segments, small blunt head raised slightly at the front (+Z), tapered tail tip curling at the back, all resting on the ground. Alternating rust, ivory and black bands. Required named parts: hea...
stage1-train-01839
plant or nature
Build a low-poly coral tree.
Asset: Branching coral tree Triangle budget: 450 Brief: Upright coral tree with a stubby flat-bottomed trunk splitting into three or four forking planar branches that fan upward, each tipped with a knobbly rounded fork, plus one low side branch. Rust body with ivory tips. Required named parts: trunk, branch_main, branc...
stage1-train-01840
prop
Build a low-poly cordless phone sitting in its charging base.
Asset: Cordless phone in cradle Triangle budget: 400 Brief: Handset standing upright but leaning back in a wedge charging base, front face +Z. Rounded slab handset with ivory display near the top, black keypad below, small speaker grille at top and mic at the bottom, thin antenna nub on the outer top corner. Base and h...
stage1-train-01841
plant or nature
Build a low-poly cordyline plant.
Asset: Cordyline plant Triangle budget: 400 Brief: Slender upright trunk (darkWood) rising to a fountain tuft of long strap leaves (sage) fanning out and drooping at the tips; a few dried rust leaves hang lower on the trunk. Vertical, no pot, base at ground. Required named parts: trunk, leaf_1, leaf_2, leaf_3, leaf_4, ...
stage1-train-01842
furniture
I need a low-poly cork bulletin board.
Asset: Cork bulletin board Triangle budget: 400 Brief: Standing board facing +Z: a thick oak frame around a recessed flat cork panel, held up by two splayed dark-wood legs at the sides, with a couple of blank ivory notes pinned near the upper area by small brass pins. Required named parts: frame, cork_panel, leg_left, ...
stage1-train-01843
container or food
I need a low-poly cork trivet.
Asset: Hexagonal cork trivet Triangle budget: 250 Brief: Flat hexagonal cork slab, chamfered top and bottom edges, lying with its face up (+Y) at ground level. Warm oak cork with a slightly darker rim bevel and a small brass hanging ring at one corner. No base. Required named parts: trivet_body, edge_bevel, hanging_rin...
stage1-train-01844
fantasy or game
Build a low-poly corked potion bottle.
Asset: Corked potion bottle Triangle budget: 400 Brief: Standing round-bellied bottle with a short tapered neck and a chunky cork stopper wedged in the top; a sage-green liquid fills the belly and a thin brass band rings the neck. Glass is pale ivory, cork oak-brown, upright at y=0. Required named parts: bottle_body, b...
stage1-train-01845
tool or gear
Build a low-poly corkscrew.
Asset: Brass-collared corkscrew Triangle budget: 300 Brief: Upright T-handle corkscrew: oak crossbar handle at the top, short iron shaft, brass collar ring, then an iron spiral worm of four angled flat-shaded turns tapering to a point at y=0. Front faces +Z. Required named parts: handle, shaft, collar, worm_turn_1, wor...
stage1-train-01846
bird, sea creature or bug
Build a low-poly cormorant standing upright.
Asset: Perched cormorant Triangle budget: 550 Brief: Standing sea cormorant: sleek upright body, long S-curved neck rising to a small head with a hooked beak, wings folded flat against the sides, stiff wedge tail angled down behind, short legs with webbed feet on the ground. Navy-black plumage, brass beak. Required nam...
stage1-train-01847
plant or nature
Build a low-poly corn cob.
Asset: Corn cob Triangle budget: 450 Brief: Upright corn cob standing on its husk base: a tapered faceted cob with rounded tip in brass, wrapped by three sage husk leaves peeling outward at the bottom, plus a small rust silk tuft at the top. Front faces +Z. Required named parts: cob, husk_leaf_left, husk_leaf_right, hu...
stage1-train-01848
container or food
I need a low-poly corn dog.
Asset: Corn dog Triangle budget: 300 Brief: Corn dog standing upright: thin ivory stick rising from the ground, a plump golden-brown battered sausage above it (slightly tapered, faceted), a small dark sausage tip peeking out at the top, plus a thin mustard drizzle across the batter. Faces +Z. Required named parts: stic...
stage1-train-01849
container or food
I need a low-poly corn on the cob.
Asset: Corn on the cob Triangle budget: 400 Brief: Husked corn cob standing upright on its short cut stem, tapering to a rounded tip; two folded sage husk leaves peel back from the base along the sides. Flat golden-yellow cob faceted into kernel rows, ivory silk tuft at the tip. Required named parts: cob, husk_left, hu...
stage1-train-01850
animal
I need a low-poly corn snake.
Asset: Coiled corn snake Triangle budget: 500 Brief: Corn snake resting in a low S-curve: a thicker ground coil at the back, a rising arch of body, small head lifted and facing +Z, tapered tail tip tucked beside the coil. Rust-orange body with dark saddle blotches and a pale underside, black bead eyes. Required named p...
stage1-train-01851
architecture
Build a low-poly corner apartment block.
Asset: Corner apartment building Triangle budget: 900 Brief: Two flat-roofed wings meeting at a 90° corner: a taller main wing facing +Z and a shorter side wing along +X, both with stepped parapets. Rows of dark recessed windows on both street faces, a corner entry door with brass lintel, and one chimney on the main ro...
stage1-train-01852
tool or gear
Build a low-poly corner clamp.
Asset: Wooden corner clamp Triangle budget: 500 Brief: Right-angle corner clamp: two flat L-shaped jaw plates meeting at 90 degrees, each with a small pad, joined by a diagonal brace; a threaded screw rod with a four-arm handle crosses the corner to tighten the jaws. Iron plates, darkWood jaw pads, brass screw and hand...
stage1-train-01853
furniture
Build me a low-poly corner cupboard.
Asset: Corner cupboard Triangle budget: 400 Brief: Tall triangular-plan cupboard built to tuck into a corner, its flat single door facing +Z, with a chamfered cornice capping the top. Oak carcass with darkWood door panel and a small round brass knob. Required named parts: body, door, knob, cornice ```javascript functi...
stage1-train-01854
furniture
I need a low-poly corner mirror.
Asset: Brass corner mirror Triangle budget: 350 Brief: Floor-standing corner mirror: tall wedge shape that tucks into a 90° corner, two brass-framed glass panels meeting at a pointed rear ridge, front faces +Z, small darkWood feet on the ground. Glass is a flat pale cool-grey (#b9c6c6) to read as mirror. Required named...
stage1-train-01855
furniture
Build a low-poly corner office desk.
Asset: Corner office desk Triangle budget: 900 Brief: L-shaped desk facing +Z: two thick rectangular tops meeting at a right angle, one long wing to the left and a shorter wing to the right, supported by four square legs, with a modesty panel under the long wing and a small drawer stack under the short wing. Oak tops w...
stage1-train-01856
furniture
Build a low-poly corner shelving unit.
Asset: Corner shelving unit Triangle budget: 700 Brief: Open corner bookcase in plan as a quarter triangle: two tall side panels meeting at 90° along the back corner (-X and -Z walls) with a single upright post at the front corner, joined by four evenly spaced quarter-shaped shelves stacked from low to near the top. Oa...
stage1-train-01857
architecture
Build a low-poly corner shop building.
Asset: Corner shop Triangle budget: 700 Brief: Two-storey corner shop with two street facades meeting at a chamfered corner entrance; rust brick walls, ivory cornice and window frames, navy awning over the glass front, darkWood door, and a small chimney on the flat roof. Corner chamfer and door face +Z. Required named ...
stage1-train-01858
furniture
I need a low-poly corner shower caddy.
Asset: Corner shower caddy Triangle budget: 500 Brief: Tension-pole shower caddy standing upright: a slender iron pole with two right-angle triangular wire baskets (corner-shaped, facing +Z) mounted at different heights, plus a small brass hook near the top. Pole runs ground to top, baskets clamped to it. Required name...
stage1-train-01859
architecture
Build a low-poly corner turret.
Asset: Corner turret Triangle budget: 550 Brief: Round corner turret: a tapered ten-sided darkWood shaft rising from a wider iron band at its foot, a corbel ring flaring under the top, and a steep conical navy roof capped by a brass finial. Two narrow ivory arrow-loop windows face +Z and +X, each sunk flush into the sh...
stage1-train-01860
architecture
Build a low-poly corner wall tower.
Asset: Round corner watchtower Triangle budget: 900 Brief: Cylindrical stone tower standing on ground, slightly wider battered base, a ring of protruding merlons at the flat top, two narrow dark arrow-slit windows, and a small arched doorway on the +Z front. Stone in iron grey, merlon caps ivory, door oak. Required nam...
stage1-train-01861
animal
Build a low-poly Cornish Rex cat.
Asset: Slender Cornish Rex Triangle budget: 700 Brief: Standing cat: slim arched-back body tapering to a narrow waist, small wedge head with big upright ears, long thin legs, and a long whip tail curling up behind. Ivory coat with rust inner ears and nose, black eyes. Faces +Z. Required named parts: body, head, ear_lef...
stage1-train-01862
fantasy or game
Build a low-poly cornucopia horn.
Asset: Cornucopia horn Triangle budget: 550 Brief: Curved horn lying on its side: wide flared mouth facing +Z, tapering to a curled point at the back (-Z), resting on the ground. A few round fruit spill from the mouth. Brass horn with ivory rim and oak/rust fruit. Required named parts: horn_body, rim, fruit_1, fruit_2,...
stage1-train-01863
vehicle
Build a low-poly coronation coach.
Asset: Coronation coach Triangle budget: 1100 Brief: Ornate state coach facing +Z: tall boxy navy cabin with ivory-glazed door panels and a domed roof edged in brass, front driver's box with a seat, two large rear wheels and two smaller front wheels on axles, draw shafts projecting forward. Brass trim, darkWood chassis...
stage1-train-01864
architecture
Build a low-poly corporate headquarters building.
Asset: Ivory corporate tower Triangle budget: 900 Brief: Boxy toy office tower standing on the ground: tall ivory slab tower with navy horizontal window bands on the front and sides, a lower navy-glazed wing to the right, a recessed dark entrance with a flat canopy at the front base, brass parapet trim and a small iron...
stage1-train-01865
tool or gear
Build a low-poly correction fluid bottle.
Asset: Correction fluid bottle Triangle budget: 350 Brief: Upright screw-top bottle: squat tapered ivory body with flat front face, short shoulder into a narrow neck, thin brass collar ring, and a chunky navy screw cap on top. Sits on the ground at y=0, front +Z. Required named parts: bottle_body, shoulder, neck, colla...
stage1-train-01866
tool or gear
Build a low-poly correction tape dispenser.
Asset: Pocket correction tape Triangle budget: 300 Brief: Palm-sized correction tape dispenser lying flat: rounded wedge body along Z, tapering to a pointed applicator tip at the front (+Z) angled down to paper level, with a short flat ivory tape strip bridging under the tip and a small brass push-button on the body's ...
stage1-train-01867
plant or nature
Build a low-poly cotton boll.
Asset: Open cotton boll Triangle budget: 400 Brief: Upright dried cotton boll: short straight stem at the base, a star of four pointed bracts (calyx) splayed outward and upward, and four rounded ivory fluff lobes bursting from the centre, each slightly overlapping so they read as a single clump. Stem and bracts in dark...
stage1-train-01868
vehicle
Build a low-poly cotton picker harvester.
Asset: Cotton picker Triangle budget: 900 Brief: Farm cotton harvester facing +Z: boxy rusty-rust chassis with a navy cab set on the left of the top, two cylindrical picker drums with spindles hanging at the front snout low to the ground, a tall open wire basket full of ivory cotton bolls behind the cab, and small iron...
stage1-train-01869
animal
Build a low-poly cotton rat.
Asset: Cotton rat Triangle budget: 500 Brief: Small stout rodent standing on all fours: elongated rounded body, blunt head with short rounded ears and a pointed snout, short legs, and a thin long tail trailing back (-Z). Shaggy grey-brown coat with a paler ivory belly. Required named parts: body, head, snout, ear_left,...
stage1-train-01870
animal
Build a low-poly cottonmouth snake.
Asset: Coiled cottonmouth snake Triangle budget: 500 Brief: Heavy-bodied pit viper resting in a flat S-coil on the ground, thick tail tapering to a short horny tip, wedge-shaped head raised at the front facing +Z with its white mouth slightly open. Sage body with darkWood dorsal banding, ivory mouth interior, black eye...
stage1-train-01871
tool or gear
I need a low-poly countersink bit.
Asset: Countersink bit Triangle budget: 350 Brief: Upright countersink bit standing on its point: slim cylindrical shank at the top, tapering into a wide conical cutting head with straight flutes, and a short pointed pilot tip reaching the ground. Iron body with a brass collar at the shank base. Required named parts: s...
stage1-train-01872
furniture
I need a low-poly countertop dishwasher.
Asset: Countertop dishwasher Triangle budget: 500 Brief: Compact boxy dishwasher sitting flat on the ground: rounded ivory body, a front door panel covering the lower two-thirds with a horizontal brass handle across its top edge, and a small control strip above the door with a round dial at one end and a couple of butt...
stage1-train-01873
prop
I need a low-poly fiddle.
Asset: Country fiddle Triangle budget: 500 Brief: Fiddle standing upright, body facing +Z: waisted rounded body with two f-holes suggested, short neck rising in -Y? No—neck rising upward, angled scroll at top, dark fingerboard and bridge, four strings, tailpiece below. Warm oak body, ivory top accents, black fittings. ...
stage1-train-01874
fantasy or game
I need a low-poly courier drone for a woodland fantasy game.
Asset: Whirring courier drone Triangle budget: 700 Brief: Hovering quadcopter courier: rounded navy hull facing +Z with a brass-rimmed lens eye, four stubby rust arms splayed diagonally, each tipped with a flat iron rotor disc; a small ivory cargo pod hangs beneath the belly, all parts connected. Required named parts: ...
stage1-train-01875
vehicle
Build a low-poly courier ship.
Asset: Courier ship Triangle budget: 850 Brief: Small fast courier craft resting level, nose toward +Z: a wedge-shaped navy hull tapering to a blunt nose, low ivory cockpit canopy set just behind the nose, two swept side fins, and a pair of cylindrical iron thrusters at the rear with brass rings, plus a small underslun...
stage1-train-01876
architecture
Build a low-poly courtyard apartment block.
Asset: Courtyard apartment block Triangle budget: 900 Brief: Four-storey block ringing an open central courtyard, four wings joined at the corners; flat ivory facades with rows of navy windows and a ground-floor archway gate on the front (+Z) wing only; low sage parapet roof. Front faces +Z. Required named parts: wing_...
stage1-train-01877
architecture
I need a low-poly courtyard gate.
Asset: Courtyard gate Triangle budget: 700 Brief: Two square oak posts flanking a double gate, capped with pointed brass finials and joined by a heavy darkWood lintel across the top; the two plank doors hang closed between them with iron strap hinges and meet at a centre seam. Front faces +Z. Required named parts: post...
stage1-train-01878
architecture
Build a low-poly courtyard housing block.
Asset: Courtyard housing block Triangle budget: 1000 Brief: U-shaped three-storey block: two side wings flanking an open courtyard, joined by a rear wing, all sharing one low-pitched roof; flat facade with rows of small punched windows and one arched entrance in the rear wall. Warm ivory plaster walls, oak roof, iron w...
stage1-train-01879
prop
Build a low-poly covered sandbox.
Asset: Covered sandbox Triangle budget: 400 Brief: Square sandbox: four low plank walls forming the box, ivory sand surface filling it just below the rim, flat lid panel resting on top hinged along the back edge and propped slightly open toward +Z. Oak walls, darkWood lid. Required named parts: wall_front, wall_back, w...
stage1-train-01880
animal
Build a low-poly cow moose.
Asset: Cow moose Triangle budget: 800 Brief: Female moose standing side-on facing +Z: heavy humped shoulders, long drooping head with a soft nose, short ears, no antlers, a hanging dewlap bell under the throat, long dark legs, stubby tail. Dark brown coat with pale lower legs. Required named parts: body, neck, head, ea...
stage1-train-01881
bird, sea creature or bug
I need a low-poly cownose ray.
Asset: Cownose ray Triangle budget: 450 Brief: Flat kite-shaped disc hovering just above the ground, wings spread wide and slightly swept back, two short rounded cephalic lobes pointing forward (+Z) with a notch between them, long thin whip tail trailing back (-Z). Slate navy top, small dark eyes at the lobe bases. Req...
stage1-train-01882
bird, sea creature or bug
I need a low-poly cowrie shell.
Asset: Mottled cowrie shell Triangle budget: 350 Brief: Cowrie shell standing on its flat ventral face: smooth oval dome behind, narrow slit aperture facing +Z, raised lips on either side of the slit with a row of small teeth ridges inside. Ivory shell with oak mottling on the dome, slit recessed in darkWood. Required ...
stage1-train-01883
animal
Build a low-poly coyote standing alert.
Asset: Alert coyote Triangle budget: 750 Brief: Standing alert coyote facing +Z, slim deep-chested body on four narrow legs, tall pointed ears, long muzzle, and a low bushy tail. Coat is oak with ivory muzzle and chest, darkWood ear tips and paws, and a black nose; paws rest at y=0. Required named parts: body, head, mu...
stage1-train-01884
furniture
Build a low-poly CPU floor stand on casters.
Asset: Adjustable CPU floor stand Triangle budget: 450 Brief: Under-desk PC tower trolley standing upright: two low floor rails on four small casters, two slim vertical uprights rising at the back connected by a top bar, and a front lip bar between the rails. Iron frame with darkWood rails. Required named parts: rail_l...
stage1-train-01885
vehicle
Build a low-poly crab boat.
Asset: Working crab boat Triangle budget: 700 Brief: Small fishing boat floating with hull bottom at y=0: a chunky navy hull with a raised bow at +Z, flat oak deck, ivory wheelhouse with navy windows set forward, a dark-wood mast with a short angled boom aft, and two stacked iron crab pots on the rear deck. Required na...
stage1-train-01886
bird, sea creature or bug
I need a low-poly crab claw.
Asset: Crab claw Triangle budget: 350 Brief: A single detached crab claw lying on the ground: chunky flattened palm on its side, a fixed lower finger and a hinged upper finger with serrated inner edges meeting at a point, and a short wrist stub at the back (-Z) with a round joint knob. Rust-red shell with darker tips. ...
stage1-train-01887
architecture
Build a low-poly crab pot trap.
Asset: Worn crab pot Triangle budget: 500 Brief: Rectangular two-hoop trap: oak hoop frames at front and back joined by thin iron slats, wrapped with rust-coloured mesh panels on top and sides, a slanted funnel entrance on the front (+Z), and a small buoy tied at one corner. Required named parts: hoop_front, hoop_back,...
stage1-train-01888
plant or nature
I need a low-poly crabapple branch.
Asset: Crabapple cluster Triangle budget: 400 Brief: A short horizontal oak branch segment with three small round crabapples hanging in a cluster beneath it, each on a thin darkWood stem, plus two sage leaves sprouting upward. Apples in rust red; every part touching the branch. Required named parts: branch, apple_1, ap...
stage1-train-01889
plant or nature
Build a low-poly crabapple tree.
Asset: Crabapple tree Triangle budget: 650 Brief: Small orchard tree: short tapered trunk flaring at the roots, three chunky branches forking up, one broad clustered canopy of faceted foliage, and a scattering of small rust-red crabapples attached under the canopy edge. DarkWood trunk, sage foliage. Required named part...
stage1-train-01890
tool or gear
Build a low-poly cracked buckler shield.
Asset: Cracked buckler Triangle budget: 450 Brief: Small round shield stood upright facing +Z: shallow dished iron face with a raised central brass boss and a riveted iron rim, held on the back by a dark wood grip bar (-Z). Two zigzag crack seams split the face off-centre, rust showing in the split. Required named part...
stage1-train-01891
bird, sea creature or bug
I need a low-poly cracked clam shell.
Asset: Cracked clam shell Triangle budget: 550 Brief: Clam shell lying flat, gaping open about 25 degrees with fronts facing +Z, both valves fan-ribbed with 8-10 flat wedge ribs and a jagged crack splitting the top valve edge. Ivory shell with sage inner lip and a small brass hinge knob at the back. Required named part...
stage1-train-01892
container or food
I need a low-poly cracked clay jug.
Asset: Cracked clay jug Triangle budget: 450 Brief: Squat terracotta jug: rounded belly widest low, tapering to a short neck with flared lip, one looped handle on the left side, a thin dark jagged crack strip running down the front-right of the belly. Rust clay with a darkWood crack and a small darkWood throat inside t...
stage1-train-01893
container or food
I need a low-poly cracked clay mug.
Asset: Cracked clay mug Triangle budget: 350 Brief: Hand-thrown clay mug, hollow and open at the top, slightly tapered 10-sided body with a thick rim and a chunky loop handle on the right (+X). A dark jagged crack runs down the front face from the rim, mirrored by a thin dark seam on the inner wall. Rust clay body, dar...
stage1-train-01894
fantasy or game
Build a low-poly cracked clay urn.
Asset: Cracked clay urn Triangle budget: 500 Brief: Fantasy urn: bulbous terracotta body tapering to a small foot on the ground, short flared neck with a thick rim, two looped handles at the shoulder, and a jagged crack strip running down the front face. Rust clay with darkWood crack and brass rim trim. Required named ...
stage1-train-01895
plant or nature
I need a low-poly cracked crystal shard.
Asset: Cracked crystal shard Triangle budget: 400 Brief: A single angular crystal shard standing upright on the ground, tilted slightly to the left, with a sharp six-sided taper and a clean diagonal crack near the top where a broken chip hangs just offset from the fracture plane. Pale crystal teal planes with ivory fac...
stage1-train-01896
bird, sea creature or bug
Build a low-poly cracked eggshell half.
Asset: Cracked eggshell Triangle budget: 300 Brief: Hollow half eggshell sitting open-side-up on the ground, tilted a touch forward so the jagged broken rim faces the viewer. Ivory shell with a few flat rust speckle patches and a darker interior visible through the opening; one cracked fragment stays attached to the ri...
stage1-train-01897
fantasy or game
I need a low-poly cracked mana crystal.
Asset: Cracked mana crystal Triangle budget: 350 Brief: Angular crystal cluster standing upright: one tall dominant hexagonal shard with a pale seam running across its face where it has split, flanked by two shorter leaning shards fused at the shared base. Glowing pale teal faces with darker navy core shading and a thi...
stage1-train-01898
plant or nature
Build a low-poly cracked mudstone clod.
Asset: Cracked mudstone clod Triangle budget: 350 Brief: Squat irregular lump, wider than tall, sitting flat on the ground, faceted flat planes with a few sharp broken edges. Main mass in darkWood-brown with lighter oak-dry facets; a small chipped fragment resting against each side; two or three thin rust-dark crack we...
stage1-train-01899
fantasy or game
Build a low-poly broken pillar.
Asset: Crumbled stone pillar Triangle budget: 400 Brief: Standing ruined column: square plinth base, short collar moulding, tall octagonal shaft snapped off at an angle near the top, jagged broken top face, and a loose chunk still clinging to the shaft just below the break. Pale ivory limestone with iron-shadowed fract...