id
stringlengths
18
18
category
stringclasses
10 values
prompt
stringlengths
21
68
response
stringlengths
1.18k
11.4k
stage1-train-01900
bird, sea creature or bug
Build a low-poly cracked seagull egg.
Asset: Cracked seagull egg Triangle budget: 250 Brief: Eggshell split into two halves: the lower half sits upright as an open ivory cup with a jagged torn rim, the upper half is tipped off and leans against it, plus one small shard lying beside. Speckles hinted with a few small sage patches. Ground at y=0, opening face...
stage1-train-01901
prop
I need a low-poly cracked smartphone.
Asset: Cracked smartphone Triangle budget: 300 Brief: Phone lying flat with screen up (+Y), long axis along Z, front edge +Z; thin rounded slab body in black with an inset navy screen, a small camera bump on the back, and three thin raised ivory crack lines radiating across the screen from one corner. Required named pa...
stage1-train-01902
container or food
I need a low-poly cracker tin.
Asset: Cracker tin Triangle budget: 350 Brief: Round cracker tin standing upright: squat cylindrical body with a slightly overhanging slip lid, a thin brass rim band at the top of the body, and a small brass knob centred on the lid. Body in iron, lid ivory, trim brass. Required named parts: body, lid, rim_band, knob `...
stage1-train-01903
tool or gear
I need a low-poly craft knife.
Asset: Craft knife Triangle budget: 300 Brief: Hobby knife lying flat on the ground pointing +Z: faceted oak barrel handle at the back, short iron ferrule collar, then a thin flat iron blade with a slanted chisel tip. Handle is thickest; blade is a slim planar wedge. Required named parts: handle, ferrule, blade ```jav...
stage1-train-01904
tool or gear
I need a low-poly craft paper punch.
Asset: Brass-handled craft punch Triangle budget: 400 Brief: Handheld plier-style hole punch resting on its die: chunky iron body frame with a flat anvil jaw at the front (+Z), a brass die ring set into the anvil, a vertical punch pin above it, and a top lever handle hinged at the rear (-Z) with a black grip. Iron body...
stage1-train-01905
tool or gear
I need a pair of low-poly craft scissors.
Asset: Craft scissors Triangle budget: 350 Brief: Scissors lying flat on the ground, blades pointing +Z and crossing at a brass pivot screw, two handle bows opening toward -Z. Flat iron blades with squared-off tips, chunky dark wood bows. Required named parts: blade_left, blade_right, bow_left, bow_right, pivot_screw ...
stage1-train-01906
vehicle
Build a low-poly crane car.
Asset: Rail maintenance crane car Triangle budget: 800 Brief: Railway crane car facing +Z: long flat black chassis deck on four iron wheels, small navy cab at the front, single angled boom rising from the deck toward the rear with a brass hook hanging from its tip. Chunky and compact, all parts touching. Required named...
stage1-train-01907
vehicle
Build a low-poly crane ship.
Asset: Small crane ship Triangle budget: 900 Brief: Compact working vessel: long flat-decked hull with a pointed bow (+Z), squat deckhouse at the stern, and a single lattice-free crane amidships — turntable base, angled boom rising forward, short cable with hook hanging. Navy hull, ivory deckhouse, brass and iron crane...
stage1-train-01908
prop
I need a low-poly crash cymbal on a stand.
Asset: Tilted crash cymbal Triangle budget: 500 Brief: Crash cymbal on a tripod stand: three splayed iron legs on the ground meeting a short collar, a slender vertical rod rising to a tilted brass cymbal disc (roughly 12-sided, gently domed at the centre) angled toward the viewer (+Z), with a small felt and wing-nut ca...
stage1-train-01909
prop
Build a low-poly crawl tunnel.
Asset: Play crawl tunnel Triangle budget: 700 Brief: Arched half-cylinder tunnel open at both ends, standing on the ground with flat side walls; a thick rounded rim framing each opening, and three raised ribs banding the shell. Sage shell with ivory rims. Required named parts: arch_shell, rim_front, rim_back, rib_1, ri...
stage1-train-01910
fantasy or game
Build a low-poly crawler repair bot for a fantasy game.
Asset: Tinker crawler bot Triangle budget: 700 Brief: Compact repair bot facing +Z: rounded iron body shell on two low tread blocks, a small domed sensor head with a single brass eye, a short articulated repair arm reaching forward with a claw tool, and a stubby antenna at the back. Weathered iron with brass fittings a...
stage1-train-01911
container or food
Build a low-poly cream puff pastry.
Asset: Cream puff Triangle budget: 400 Brief: Choux bun split in two: a squat rounded golden-brown base shell open at the top, an ivory cream mound swelling above the rim, and a cracked domed lid tilted slightly off-axis resting on the cream. Front faces +Z. Required named parts: bun_base, cream_filling, bun_lid ```ja...
stage1-train-01912
furniture
I need a low-poly credenza.
Asset: Low credenza Triangle budget: 500 Brief: Sideboard: long rectangular carcass on four short tapered legs, overhanging top slab, two doors on the front (+Z) with slim brass pulls, dark wood frame with oak door panels. Front faces +Z. Required named parts: top, body, door_left, door_right, pull_left, pull_right, le...
stage1-train-01913
architecture
Build a low-poly crenellated wall section.
Asset: Crenellated wall Triangle budget: 500 Brief: A short straight battlement run standing on the ground: a thick rectangular wall slab with a slightly battered profile, topped by five evenly spaced rectangular merlons with flat caps, gaps between them forming the crenels. Ivory stone wall with iron merlon caps, fron...
stage1-train-01914
architecture
Build a low-poly crenellated wall segment.
Asset: Crenellated wall segment Triangle budget: 400 Brief: Straight stone wall block standing on the ground, front face +Z, with a slightly proud coping course along its top edge and three evenly spaced merlons rising above it, leaving two open crenel gaps between them. Cool grey stone with a slightly darker tone on t...
stage1-train-01915
container or food
I need a low-poly crepe pan.
Asset: Cast-iron crepe pan Triangle budget: 400 Brief: Lying flat on the ground, shallow circular basin facing up, low flared rim, long straight handle extending +Z from the rim with a brass ferrule and two rivets. Iron basin, oak handle, brass fittings. Required named parts: pan_basin, pan_rim, handle, ferrule, rivet_...
stage1-train-01916
plant or nature
Build a low-poly crescent sand dune.
Asset: Crescent dune Triangle budget: 450 Brief: A single wind-swept dune curving into a crescent: gentle windward slope rising from the ground at +Z, sharp curved crest, steep concave slip face behind (-Z), and two tapering horns reaching around the sides. Ivory sand body with the slip face in a slightly deeper sand t...
stage1-train-01917
vehicle
I need a low-poly crew cab pickup truck.
Asset: Crew cab pickup Triangle budget: 1100 Brief: Four-door pickup facing +Z: long bonnet, tall squared crew cab with four side windows, open rear bed with low sides and tailgate, four chunky wheels with iron tyres. Body in sage with darkWood bumpers and ivory lamps. Required named parts: body, cab, bed, tailgate, wh...
stage1-train-01918
prop
I need a low-poly cricket ball.
Asset: Cricket ball Triangle budget: 250 Brief: Cricket ball: low-poly sphere in rust leather, with a raised equatorial seam band of ivory stitching wrapping around it, slightly proud of the surface. Seam runs horizontally across the front, facing +Z. Required named parts: ball, seam ```javascript function buildAsset(...
stage1-train-01919
prop
I need a low-poly cricket bat.
Asset: Worn cricket bat Triangle budget: 350 Brief: Bat standing upright with the toe on the ground, flat blade facing +Z, slight widening at the shoulders; a short cylindrical handle above the shoulders wrapped with a ribbed grip, small rounded toe cap. Blade in ivory, handle and grip in darkWood. Required named parts...
stage1-train-01920
prop
I need a low-poly cricket stump.
Asset: Cricket stump Triangle budget: 250 Brief: Single cricket stump standing upright: tapered octagonal oak post, domed ivory-ish cap on top, thin brass ferrule ring just below the cap, slightly wider darkWood foot resting at ground level. Front faces +Z. Required named parts: stump, top_cap, ferrule_band, foot ```j...
stage1-train-01921
bird, sea creature or bug
Build a low-poly crimson rosella.
Asset: Crimson rosella Triangle budget: 650 Brief: Perched parrot facing +Z: plump upright crimson body, round head with blue cheek patches, short hooked pale beak, two folded blue wings along the flanks, long tapering blue-and-crimson tail sweeping down and back, two small dark feet gripping at ground level. Required ...
stage1-train-01922
container or food
Build a low-poly crispy chicken burger.
Asset: Crispy chicken burger Triangle budget: 500 Brief: Stacked burger sitting flat on y=0: rounded bottom bun, chunky faceted crispy chicken patty with zigzag breaded edge, wavy lettuce layer spilling slightly past the patty, thin sauce slab, domed top bun. Buns toasted brass, patty golden rust, lettuce sage. Require...
stage1-train-01923
tool or gear
I need a low-poly crochet hook.
Asset: Wooden-handled crochet hook Triangle budget: 250 Brief: Crochet hook standing upright: fat rounded oak handle at the bottom, short brass ferrule, slender iron shaft rising from it, top bent into a small open hook facing +Z. Slim, planar, deliberate. Required named parts: handle, ferrule, shaft, hook_tip ```java...
stage1-train-01924
animal
Build a low-poly crocodile skink.
Asset: Crocodile skink Triangle budget: 500 Brief: Low-slung sprawled lizard, belly near ground, pointed snout facing +Z, tapering tail trailing back (-Z), four short bent legs with splayed toes, small spiky crest along back. Dark wood-brown body with a pale ivory dorsal stripe down the spine. Required named parts: bod...
stage1-train-01925
vehicle
I need a low-poly crop sprayer.
Asset: Field crop sprayer Triangle budget: 700 Brief: Two-wheeled trailed sprayer facing +Z: low chassis frame, a rounded saddle tank sitting on it, two wide wheels on a side axle, and a long horizontal boom across the rear with short downward nozzle stubs. Iron frame and boom, sage tank, brass fittings. Required named...
stage1-train-01926
container or food
I need a low-poly croquembouche dessert.
Asset: Caramel croquembouche Triangle budget: 1000 Brief: Croquembouche standing on the ground: a tapering stack of ivory cream puffs spiralling up into a rounded cone, topped with a single puff, all bound by a thin caramel lattice and a spun-sugar collar at the base. Warm ivory puffs, brass-gold caramel, pastry-tan ba...
stage1-train-01927
furniture
I need a low-poly cross-cut paper shredder.
Asset: Office cross-cut shredder Triangle budget: 400 Brief: Boxy shredder: tall dark navy housing with a slotted feed opening on top, a small brass control strip on the front face, and a pull-out waste basket below with a visible front drawer panel. Faces +Z, sits flat on y=0. Required named parts: housing, feed_slot,...
stage1-train-01928
tool or gear
I need a low-poly crossbow bolt.
Asset: Crossbow bolt Triangle budget: 300 Brief: Crossbow bolt lying horizontally along Z with the iron tip forward (+Z) and resting on the ground at y=0. Oak shaft, short pyramidal iron head, two opposed rust vanes at the rear, darkWood nock notch. Required named parts: shaft, head, fletching_1, fletching_2, nock ```...
stage1-train-01929
fantasy or game
I need a low-poly crossbow turret for a fantasy game.
Asset: Crossbow turret Triangle budget: 700 Brief: Iron-banded wooden tripod base on the ground, a brass pivot collar above it carrying a swivel mount and a horizontal oak stock aimed +Z, with two recurved bow limbs flanking the front, a taut string across them, and a single loaded bolt in the groove. Required named pa...
stage1-train-01930
vehicle
Build a low-poly crossover SUV.
Asset: Compact crossover SUV Triangle budget: 900 Brief: Crossover SUV facing +Z: two-box body with a slightly tapered greenhouse cabin, four chunky black wheels sitting on y=0, short front and rear bumpers, small side mirrors. Navy body, black tyres, iron trim and ivory lamps. Required named parts: body, cabin, wheel_...
stage1-train-01931
prop
I need a low-poly crosswalk sign.
Asset: Crosswalk sign Triangle budget: 300 Brief: Street sign facing +Z: iron post rising from a small flat base, topped by a square ivory plate with a navy border and a simple flat black walking-figure silhouette in the centre. Figure strides to the right, one arm forward. Required named parts: base, post, sign_plate,...
stage1-train-01932
plant or nature
I need a low-poly croton plant.
Asset: Variegated croton Triangle budget: 650 Brief: Upright potted croton facing +Z: a short rust pot with dark soil, a slender woody stem rising from it, and broad flat-shaded leaves fanning out in alternating tiers, sage green with rust and brass accent leaves for the variegated look. All leaves attach directly to t...
stage1-train-01933
prop
I need a low-poly crow's nest lookout barrel.
Asset: Crow's nest Triangle budget: 450 Brief: Ship's lookout: a wide octagonal wooden basket, slightly tapered so it narrows at the bottom, with a rim band on top and a stubby mounting collar underneath so it sits as one connected piece. Dark wood staves with brass rim trim. Required named parts: basket, rim, mount_co...
stage1-train-01934
prop
Build a low-poly CRT television.
Asset: Retro CRT television Triangle budget: 700 Brief: Chunky boxy TV cabinet facing +Z with a slightly domed ivory screen inset in a dark front bezel, a tapering rear housing, two brass knobs on the right of the front panel, a V of two thin antenna rods on top, and four short feet. Dark wood body, iron bezel, black s...
stage1-train-01935
vehicle
Build a low-poly cruise ship.
Asset: Little cruise ship Triangle budget: 900 Brief: Toy cruise liner pointing +Z: ivory hull with navy lower band and pointed bow, one stacked white superstructure deck with a row of dark windows, a small navy bridge block at the front, two ivory funnels with brass caps set slightly aft. Flat-shaded stepped masses, n...
stage1-train-01936
vehicle
Build a low-poly cruiser bicycle.
Asset: Cruiser bicycle Triangle budget: 800 Brief: Cruiser bike resting upright on two wheels, handlebars facing +Z: navy frame with curved top tube, black tires on iron rims, ivory saddle, swept-back handlebar with brass bell and a front fork. Wheels touch ground at y=0. Required named parts: frame, wheel_front, wheel...
stage1-train-01937
container or food
I need a low-poly crushed soda can.
Asset: Crumpled soda can Triangle budget: 400 Brief: Empty can lying on its side, axis along X, dented and pinched at the middle so the body reads as two tapered halves with faceted creases. Rust-red body with a bare iron top rim, small flat tab on the lid, thin iron base rim. Required named parts: body, top_rim, botto...
stage1-train-01938
container or food
Build a low-poly crunchy taco.
Asset: Crunchy taco Triangle budget: 400 Brief: Upright folded taco shell standing open, flat yellow shell walls forming a U with a rounded bottom, packed with a mounded filling of rust-brown meat, sage-green shredded lettuce and small ivory cheese flecks spilling over the top edge. Front faces +Z. Required named parts...
stage1-train-01939
fantasy or game
Build a low-poly crushing wall press trap.
Asset: Grim crushing wall press Triangle budget: 700 Brief: Two upright stone slabs face each other across a narrow +Z corridor, each inner face clad in an iron plate bristling with short square spikes. Both slabs stand on an oak base frame with a brass gear and crank wheel at the back that drives them together; chunky...
stage1-train-01940
fantasy or game
I need a low-poly cryo canister prop.
Asset: Frosted cryo canister Triangle budget: 500 Brief: Upright cylindrical coolant canister: stepped round base, tall iron tank body, narrow navy coolant window slit on the front (+Z), domed cap topped with a small brass valve wheel and a short frost-ivory vent spout. Iron shell, navy window, brass valve, ivory frost...
stage1-train-01941
fantasy or game
I need a low-poly cryo sleep pod for a fantasy game.
Asset: Frosted cryo sleep pod Triangle budget: 750 Brief: Sitting upright on the ground: flared iron base ring, tall eight-sided hull with a domed top, brass collar rim sealing the domed shoulder, and a large rounded ivory viewing pane set into the front face. Two small iron vents flank the lower hull front; navy trim ...
stage1-train-01942
fantasy or game
Build a low-poly crystal arrow.
Asset: Crystal arrow Triangle budget: 400 Brief: Upright arrow leaning slightly, pointing up +Y: faceted crystal head forming the tip, slender iron shaft, darkWood nock notch at the base, two flat fletching vanes near the bottom angled outward. Crystal in sage, fletching ivory. Required named parts: shaft, crystal_head...
stage1-train-01943
fantasy or game
Build a low-poly crystal ball stand.
Asset: Crystal ball stand Triangle budget: 500 Brief: Upright round pedestal base with a short brass stem, three curved iron claws rising to cradle a faceted pale-blue crystal sphere at the top. Brass and iron from the palette, crystal in a soft icy blue. Required named parts: base, stem, claw_1, claw_2, claw_3, crysta...
stage1-train-01944
bird, sea creature or bug
Build a low-poly crystal beetle.
Asset: Faceted crystal beetle Triangle budget: 700 Brief: Stout beetle facing +Z with a low domed faceted crystal carapace over a dark abdomen, a small wedge head with two short brass antennae, and six splayed brass legs planted on the ground; a single ivory crystal horn rises from the head. Carapace palest blue-white,...
stage1-train-01945
fantasy or game
Build a low-poly crystal chalice.
Asset: Ritual crystal chalice Triangle budget: 500 Brief: Fantasy chalice standing upright: faceted pale aqua crystal bowl (front +Z) with a scalloped rim and small brass collar, slender faceted stem, broad ivory foot with brass band. Crystalline planes flat-shaded, colours pale aqua, ivory, brass. Required named parts...
stage1-train-01946
fantasy or game
I need a low-poly crystal horn.
Asset: Crystal hunting horn Triangle budget: 550 Brief: Small curved hunting horn lying ready to play: crescent-shaped faceted crystal body sweeping from a brass mouthpiece at the left to a flared bell at the right, two brass binding bands, a raised brass bell rim, and a short cord tassel hanging from the lower band. C...
stage1-train-01947
fantasy or game
I need a low-poly crystal pendant.
Asset: Hanging crystal pendant Triangle budget: 300 Brief: Small hanging pendant modelled upright: a brass cap with a loop bail at the top, under it a long faceted crystal drop — a pointed bipyramid body with two smaller side shards clinging to it. Crystal in pale teal, cap in brass, bail in iron. Required named parts:...
stage1-train-01948
fantasy or game
I need a low-poly crystal prism prop.
Asset: Floating crystal prism Triangle budget: 250 Brief: Single upright faceted prism: elongated hexagonal body tapering to a sharp point at top and a shorter point at bottom, floating with its lower tip just above y=0; a slim brass collar band rings the middle. Pale teal crystal, flat-shaded faces. Required named par...
stage1-train-01949
fantasy or game
I need a low-poly crystal scepter.
Asset: Crystal scepter Triangle budget: 400 Brief: Upright scepter: straight darkWood shaft with a small brass pommel at the bottom and two brass collars, twin iron prongs at the top cradling a faceted sage crystal that points up. Front faces +Z, all parts connected. Required named parts: shaft, pommel, collar_low, col...
stage1-train-01950
fantasy or game
I need a low-poly crystal skull.
Asset: Faceted crystal skull Triangle budget: 700 Brief: Skull resting level on the ground, face +Z: chunky faceted cranium, heavy brow ridge over two deep dark eye sockets, small nasal cavity, and a fused jaw with a row of blocky teeth. Pale translucent-looking ivory crystal with sage-tinted shadow facets and black so...
stage1-train-01951
fantasy or game
Build a low-poly crystal slime.
Asset: Crystal slime Triangle budget: 400 Brief: Blobby dome-shaped slime resting flat on the ground, glossy navy body with a slight front bulge, three angular ivory crystal shards jutting from its back and top, two small black eyes facing +Z. Squat, wider than tall. Required named parts: body, crystal_1, crystal_2, cr...
stage1-train-01952
fantasy or game
Build a low-poly crystal spear.
Asset: Crystal spear Triangle budget: 350 Brief: Upright spear held vertically: long slender darkWood shaft, brass collar binding below the head, faceted pale-blue crystal blade tapering to a point at the top, small iron butt cap at the foot. Everything stacked on one axis, front-facing facets toward +Z. Required named...
stage1-train-01953
bird, sea creature or bug
Build a low-poly crystal spider.
Asset: Crystal spider Triangle budget: 700 Brief: Crystal spider standing on eight splayed faceted legs, body low to the ground, front faces +Z. Large blocky faceted abdomen behind a smaller angular head, ivory crystal shard crest along the back, two small downward fangs; legs dark iron with ivory facet tips. Required ...
stage1-train-01954
fantasy or game
Build a low-poly crystal staff.
Asset: Crystal staff Triangle budget: 500 Brief: Upright staff standing on the ground: long tapered darkWood shaft, a wrapped grip band low down, three short brass prongs at the top cradling a faceted sage-tinted crystal that glows softly. Vertical, no plinth. Required named parts: shaft, grip_wrap, crown_prongs, cryst...
stage1-train-01955
plant or nature
I need a low-poly crystal stalactite.
Asset: Amethyst stalactite cluster Triangle budget: 500 Brief: Hanging cave formation: a small dark rock root at the very top (highest point) with five tapering hexagonal crystals pointing straight down, the longest central spire reaching y=0, shorter ones flanking it at splayed angles. Faces +Z. Pale violet crystal fa...
stage1-train-01956
fantasy or game
I need a low-poly crystal wand.
Asset: Crystal wand Triangle budget: 350 Brief: Upright wand standing on its base: tapered oak shaft with a brass ferrule band, topped by a faceted elongated crystal point held in a four-prong iron claw. Crystal in sage with a lighter ivory facet tip. Required named parts: shaft, ferrule, crystal, prong_1, prong_2, pro...
stage1-train-01957
container or food
I need a low-poly crystal wine glass.
Asset: Delicate crystal wine glass Triangle budget: 250 Brief: Upright wine glass centered on the origin with the foot flat at y=0: a shallow round foot, slim baluster stem, and a U-shaped bowl tapering inward at its base with a thin rim. Pale ivory glass with a small brass stem collar. Required named parts: foot, stem...
stage1-train-01958
prop
Build a low-poly cubby house.
Asset: Small cubby house Triangle budget: 700 Brief: Little wooden playhouse with four plank walls, a ridge (gable) roof overhanging the front, a plank door on the front face and one square window beside it, sitting flat on the ground. Oak walls, dark wood roof, ivory trim. Required named parts: walls, roof, door, wind...
stage1-train-01959
furniture
Build a low-poly cube organizer shelf.
Asset: Cube organizer shelf Triangle budget: 500 Brief: Square cubby shelving unit, 2x2 open compartments, standing upright on the ground: two thick side panels, top and bottom panels, a solid back panel, one vertical divider and one horizontal shelf mid-height. Oak frame with darker recessed back. Required named parts...
stage1-train-01960
furniture
Build a low-poly cubicle divider panel.
Asset: Compact cubicle divider Triangle budget: 300 Brief: Upright office divider panel, thin and rectangular, with a sage fabric face, a dark wood top cap rail, and two small iron feet at the bottom corners; front faces +Z, feet rest on ground at y=0. Required named parts: panel, top_rail, foot_left, foot_right ```ja...
stage1-train-01961
bird, sea creature or bug
I need a low-poly cuckoo bee.
Asset: Cuckoo bee Triangle budget: 500 Brief: Chunky bee resting pose: rounded thorax with a fuzzy band, tapered striped abdomen behind, round head at +Z with two antennae, two pairs of flat triangular wings swept back over the body, six short legs tucked under. Rust and black banding with ivory wing panes. Required na...
stage1-train-01962
plant or nature
Build a low-poly cucumber on the vine.
Asset: Vine cucumber Triangle budget: 500 Brief: A short sage vine stem rising and arcing over, with two broad leaves and one curled tendril, and a single ribbed cucumber hanging from the arc with its pale blossom tip pointing down. Slight bumps on the cucumber for character. Required named parts: vine_stem, leaf_left,...
stage1-train-01963
tool or gear
Build a low-poly cup anemometer.
Asset: Cup anemometer Triangle budget: 450 Brief: Wind-speed anemometer: short vertical spindle on a small mounting hub, three horizontal arms radiating evenly, each ending in a hollow half-cup opening sideways (one face cut open). Iron and brass. Required named parts: spindle, hub, arm_1, arm_2, arm_3, cup_1, cup_2, c...
stage1-train-01964
architecture
Build a low-poly cupola furnace.
Asset: Cupola furnace Triangle budget: 700 Brief: Foundry cupola: tall tapered cylindrical shell of riveted iron plate, standing on a wider base ring, with a small charging door on the upper front-left, a brass wind box ring low on the shell with four short tuyere nozzles, and a rust tapping spout jutting from the bott...
stage1-train-01965
bird, sea creature or bug
Build a low-poly curlew figure.
Asset: Standing curlew Triangle budget: 600 Brief: Standing wading bird: slender oval body tilted slightly nose-up, short tail at back, long slim neck rising to a small head; a long thin bill curving downward toward +Z. Two thin straight legs on the ground, folded wings against the flanks. Oak and ivory plumage with da...
stage1-train-01966
plant or nature
Build a low-poly curling fern.
Asset: Curling fern Triangle budget: 450 Brief: Small woodland fern: a short sage stem crown at ground level with five arching fronds spiralling inward at the tips, each frond a flat tapered blade with a few angular leaf notches. Sage green with darker stems. Required named parts: crown, frond_1, frond_2, frond_3, fron...
stage1-train-01967
tool or gear
I need a low-poly clamp current meter.
Asset: Clamp current meter Triangle budget: 350 Brief: Handheld clamp ammeter standing upright: C-shaped iron clamp jaws at the top with a small gap, rectangular iron body below, inset ivory screen on the front face, brass trigger lever beneath the jaws, black grip wrapping the lower handle. Front faces +Z. Required na...
stage1-train-01968
fantasy or game
I need a low-poly cursed amulet prop.
Asset: Cursed amulet Triangle budget: 400 Brief: Hanging pendant: a thin oval chain loop rising to a small clasp, feeding into a brass frame holding a faceted gem that glows dimly; the gem set proud of the frame, front faces +Z. Brass frame, rust gem, iron chain. Required named parts: chain_loop, clasp, frame, gem, bez...
stage1-train-01969
fantasy or game
I need a low-poly cursed suit of armor.
Asset: Cursed hollow armor Triangle budget: 700 Brief: Empty suit of armor standing upright, slightly hunched with the helmet tipped forward, gauntleted arms hanging loose, greaves planted apart; iron plates streaked with rust, a void-black gap inside the visor, tattered sage cloth hanging from the waist. Front faces +...
stage1-train-01970
tool or gear
I need a low-poly cursed dagger.
Asset: Cursed dagger Triangle budget: 350 Brief: Dagger standing upright on its pommel, blade up: slender iron blade with a notched, jagged edge and a rust-tainted tip, small brass crossguard, short darkWood grip wrapped at the base, round iron pommel. Flat-shaded, slight lean for character. Required named parts: blade...
stage1-train-01971
fantasy or game
Build a low-poly cursed lock.
Asset: Cursed padlock Triangle budget: 500 Brief: Heavy padlock standing upright: chunky iron body with a thick curved shackle looped through the top, a brass keyhole escutcheon on the front face, and a single rust-red eye set above the keyhole that gives it its cursed look. Front faces +Z. Required named parts: body, ...
stage1-train-01972
fantasy or game
I need a low-poly cursed puzzle box.
Asset: Cursed puzzle box Triangle budget: 400 Brief: Small ornate cube-ish box sitting flat on the ground, front facing +Z, slightly wider than tall with a thick overhanging lid slab on top. Dark wood body with two iron bands framing the front, a brass dial disc on the front face, a small inset glowing green rune plate...
stage1-train-01973
fantasy or game
I need a low-poly cursed tome.
Asset: Cursed tome Triangle budget: 400 Brief: A thick closed book standing tilted, front cover facing +Z: navy covers with a darkWood spine, a chunky ivory page block slightly inset, a brass clasp crossing the fore-edge and a rust rune emblem on the cover. No text; the emblem is a simple raised planar sigil. Required ...
stage1-train-01974
architecture
Build a low-poly curtain wall panel.
Asset: Glazed curtain wall module Triangle budget: 400 Brief: One facade module standing on the ground: a flat rectangular grid of dark iron mullions and a transom with navy glass panes recessed slightly behind the frame, plus a brass sill along the bottom; front faces +Z, three bays wide by two rows tall. Required nam...
stage1-train-01975
fantasy or game
I need a low-poly curved athame.
Asset: Curved athame Triangle budget: 400 Brief: Ritual dagger standing point-up: dark wooden grip with a brass pommel and a small brass crossguard, above which a single-edged iron blade sweeps in a smooth forward curve toward the tip. Blade tapers to a point, spine thicker than edge, all sections flat-shaded. Required...
stage1-train-01976
architecture
Build a low-poly curved glass tower.
Asset: Curved glass tower Triangle budget: 750 Brief: Slender tower standing on the ground, its front (+Z) bowed outward as a gently curving faceted glass wall, slightly tapering toward the flat-topped crown. Navy glass panels divided by thin iron floor bands, a brass band at the top under a narrow ivory cap, and a rec...
stage1-train-01977
tool or gear
Build a low-poly kris dagger standing point-up.
Asset: Curved kris dagger Triangle budget: 400 Brief: Displayed upright: pommel at ground, point to the sky, broad flat faces toward +Z. Wavy iron blade with five gentle lateral waves, a slim brass gonjo guard, a dark wood grip with a slight waist, and a flared ivory pommel cap. No scabbard. Required named parts: blade...
stage1-train-01978
tool or gear
I need a low-poly curved scimitar.
Asset: Curved scimitar Triangle budget: 450 Brief: Scimitar standing upright, hilt at the bottom, blade flat facing +Z so its curve reads, sweeping back and up toward the tip with a single edge on the outer curve. Iron blade with a brass crossguard, dark wood grip and a small brass pommel. Required named parts: blade, ...
stage1-train-01979
container or food
I need a low-poly custard cup.
Asset: Caramel custard cup Triangle budget: 350 Brief: Small fluted ramekin with tapered ivory sides on a narrow foot, filled level to the rim with pale custard and a glossy rust caramel top. Upright, front faces +Z. Required named parts: cup_body, foot, rim, custard_top ```javascript function buildAsset(THREE) { co...
stage1-train-01980
container or food
I need a low-poly custard tart.
Asset: Nutmeg-dusted custard tart Triangle budget: 250 Brief: Shallow fluted shortcrust pastry case sitting flat on the ground, its ivory custard filling just domed above the rim, with a few tiny darkWood nutmeg specks on top. Oak pastry, ivory custard. Required named parts: pastry_case, custard_filling, nutmeg_speck_1...
stage1-train-01981
architecture
Build a low-poly customs house.
Asset: Harbour customs house Triangle budget: 900 Brief: A squat two-storey customs house facing +Z: ivory wall body with a darkWood gabled roof, a square look-out tower rising at the front-left corner capped with an iron pyramid, a wide oak door under a navy canopy, brass trim, and small iron windows. Everything sits ...
stage1-train-01982
plant or nature
Build a low-poly cut log.
Asset: Cut log Triangle budget: 400 Brief: A short felled log segment lying with its axis along Z: a rough dark bark cylinder with a flat ivory cut face at each end, faint concentric ring detail on the front face, and two small knot stubs on top. Bark darkWood, cut faces ivory with oak rings. Required named parts: log_...
stage1-train-01983
tool or gear
I need a low-poly cut-off wheel.
Asset: Cut-off wheel Triangle budget: 350 Brief: Abrasive cut-off disc standing upright in the XY plane, thin with a bevelled rim, small central arbor hub, and two iron flanges clamping the disc faces. Disc in rust, hub and flanges in iron with a brass nut. Required named parts: disc, hub, flange_front, flange_back, nu...
stage1-train-01984
plant or nature
Build a low-poly tree stump.
Asset: Cut tree stump Triangle budget: 400 Brief: Freshly cut stump: short squat oak trunk with a flat ivory cut top face slightly proud of the bark rim, three chunky darkWood roots gripping the ground, one small sage moss patch on the bark. Upright, ground at y=0. Required named parts: trunk, cut_top, root_1, root_2, ...
stage1-train-01985
vehicle
Build a low-poly cutter suction dredger.
Asset: Cutter suction dredger Triangle budget: 850 Brief: Floating dredger facing +Z: a flat rectangular navy pontoon hull, a rust cutter head on a lowered ladder arm projecting from the bow down near the waterline, a boxy iron control cabin aft on deck, and two vertical spud pins at the stern. Brass trim rails. Requir...
stage1-train-01986
tool or gear
Build a low-poly cutting gauge.
Asset: Wooden cutting gauge Triangle budget: 400 Brief: Marking gauge at rest: a long oak beam running left-right, a chunky darkWood fence block sliding on it near the left end, a flat iron cutting disc set crosswise near the right tip, and a small brass thumbscrew on top of the fence. Flat-shaded, all parts touching. ...
stage1-train-01987
tool or gear
I need a low-poly cutting mat.
Asset: Self-healing cutting mat Triangle budget: 300 Brief: Flat rectangular mat lying on the ground plane, thin slab with a slightly rounded look via chamfered edges, a raised darker border strip around the rim, and a sparse grid of thin inset lines in two directions (no numbers). Sage body, navy border, ivory grid. R...
stage1-train-01988
architecture
Build a low-poly Cycladic white house.
Asset: Cycladic white house Triangle budget: 550 Brief: Cuboid whitewashed house with slightly rounded edges, a low barrel-vault roof, a navy blue door on the front (+Z), one small navy window on the front and one on the side, and a short chimney at the roof edge. Everything connected and flat on the ground. Required n...
stage1-train-01989
prop
I need a low-poly cycling helmet.
Asset: Cycling helmet Triangle budget: 450 Brief: Aerodynamic bike helmet: rounded shell domed front-to-back with a tapered tail, three recessed vent slots along the top, small front visor lip, chin strap looping down under with a brass buckle. Navy shell, black straps. Required named parts: shell, vent_1, vent_2, vent...
stage1-train-01990
prop
I need a low-poly cycling shoe.
Asset: Cycling shoe Triangle budget: 450 Brief: Toe pointing +Z, flat on the ground: wedge-shaped rigid sole, domed upper over the foot, a tapered toe cap, a low heel counter, two angled closure straps across the instep, and a small cleat block under the sole. Sole and cleat iron-dark, upper sage, straps navy, trim bra...
stage1-train-01991
furniture
I need a low-poly pendant lamp with a cylindrical shade.
Asset: Cylinder pendant lamp Triangle budget: 350 Brief: Hanging pendant: thin cord rising from a small round canopy at the top down to an open-bottomed iron cylinder shade, with a brass rim at the shade's lower edge and an ivory bulb glowing inside. Shade axis vertical, hanging well above y=0. Required named parts: co...
stage1-train-01992
architecture
Build a low-poly cylindrical tower.
Asset: Round watchtower Triangle budget: 500 Brief: Squat round stone tower: tapered cylindrical shaft, a conical roof cap, one arched door at the front, two small slit windows above, and a narrow collar band near the top. Iron-grey shaft, navy roof, darkWood door. Required named parts: shaft, roof, door, window_left, ...
stage1-train-01993
plant or nature
Build a low-poly cypress tree.
Asset: Slender cypress Triangle budget: 350 Brief: Tall flame-shaped cypress: short darkWood trunk flaring at the ground, then three stacked tapering foliage sections (widest just above the trunk, narrowing to a soft point) with faceted low-sided silhouettes. Sage foliage, darkWood trunk; slight irregular offsets betwe...
stage1-train-01994
plant or nature
I need a low-poly daffodil bulb.
Asset: Daffodil bulb Triangle budget: 400 Brief: A single dormant daffodil bulb standing upright nose-up, resting on its basal plate at ground: egg-shaped ivory bulb body wrapped in a loose papery oak-brown tunic that peels slightly at the shoulder, a pale ivory basal plate with a small cluster of short stubby roots be...
stage1-train-01995
plant or nature
Build a low-poly daikon radish.
Asset: Daikon radish Triangle budget: 400 Brief: Upright daikon standing on its narrow root tip: long tapered ivory root body, slightly bowed, with a short sage stem and three broad sage leaves fanning out at the top. Front faces +Z. Required named parts: root, tip, stem, leaf_1, leaf_2, leaf_3 ```javascript function ...
stage1-train-01996
animal
Build a low-poly dalmatian.
Asset: Spotted dalmatian Triangle budget: 800 Brief: Standing dalmatian facing +Z: lean boxy torso, upright neck and wedge head with short muzzle, floppy ears, four straight legs, thin upward tail. Ivory coat with flat black irregular spots, black ears and nose. Required named parts: body, head, muzzle, ear_left, ear_r...
stage1-train-01997
plant or nature
I need a low-poly damp stump.
Asset: Damp mossy stump Triangle budget: 400 Brief: Cut tree stump standing upright: cylindrical dark oak body with an irregular jagged top rim, pale ivory cut face, a sage moss patch spilling down one side, and two low root flares gripping the ground at the front. Front faces +Z. Required named parts: stump_body, top_...
stage1-train-01998
tool or gear
I need a low-poly dandelion weeder.
Asset: Dandelion weeder Triangle budget: 250 Brief: Hand weeder standing upright: long tapered wooden handle, a short iron ferrule collar, and a flat forked blade at the bottom with two prongs and a slight forward bend. Handle oak, metal iron. Required named parts: handle, ferrule, blade, prong_left, prong_right ```ja...
stage1-train-01999
container or food
I need a low-poly danish pastry.
Asset: Coiled danish pastry Triangle budget: 400 Brief: Round danish pastry: flat oval laminated base with a spiral coil of dough wrapped around a sunken centre well, filled with a dollop of rust-red jam. Warm oak-gold crust with brass highlights. Lies flat, top facing +Y. Required named parts: pastry_base, coil, filli...