id stringlengths 18 18 | category stringclasses 10
values | prompt stringlengths 21 68 | response stringlengths 1.18k 11.4k |
|---|---|---|---|
stage1-train-02300 | fantasy or game | Build a low-poly eye talisman. | Asset: Warding eye talisman
Triangle budget: 350
Brief: Upright oval amulet facing +Z, its lower edge resting on the ground, a brass suspension loop rising from the top. Iron bezel rim encloses a slightly domed ivory sclera with a navy iris and black pupil at centre.
Required named parts: rim, eye_sclera, iris, pupil, ... |
stage1-train-02301 | tool or gear | I need a low-poly F-clamp. | Asset: Iron F-clamp
Triangle budget: 400
Brief: F-clamp lying so the bar runs along +Z with jaws opening upward: an iron bar, a fixed jaw at the front end and a sliding jaw near the back, each with a flat pressing face; a brass threaded screw rises through the sliding jaw with a small swivel pad on top and a turned oak... |
stage1-train-02302 | tool or gear | I need a low-poly pair of fabric scissors. | Asset: Fabric scissors
Triangle budget: 400
Brief: Open dressmaking scissors lying flat, blades angled forward (+Z) in a shallow V, crossing at a central pivot screw, two oval finger-loop handles trailing back (-Z). Iron blades with brass pivot and darkWood grips.
Required named parts: blade_left, blade_right, handle_l... |
stage1-train-02303 | architecture | Build a low-poly factory building. | Asset: Brick factory
Triangle budget: 700
Brief: Compact brick factory: tall rectangular main block with a stepped facade, a row of tall windows across the front, a wide loading door at centre front, and one tall chimney stack rising from the rear roof corner. Rust brick, iron windows, darkWood door; front faces +Z.
Re... |
stage1-train-02304 | fantasy or game | Build a low-poly fairy dust pouch. | Asset: Fairy dust pouch
Triangle budget: 400
Brief: Small plump drawstring pouch sitting upright: soft rounded sack body with a gathered pleated neck, cinched by a brass-beaded cord whose two short ends dangle down the front. Ivory cloth sack, brass bead, sage cord; front faces +Z.
Required named parts: pouch_body, pou... |
stage1-train-02305 | fantasy or game | I need a low-poly fairy dust vial. | Asset: Fairy dust vial
Triangle budget: 400
Brief: Small upright glass vial: faceted teardrop body, narrow neck with a brass collar ring, ivory cork jammed in the top, and a mound of glowing brass-coloured dust filling the lower half. Glass tinted sage, standing on y=0.
Required named parts: vial_body, neck, collar_rin... |
stage1-train-02306 | prop | I need a low-poly fake spider prop. | Asset: Toy spider
Triangle budget: 700
Brief: Toy spider: large round abdomen behind a smaller head, both black, with a rust-brown stripe across the abdomen; eight thin jointed legs in darkWood, four per side, each bent up at the knee then down to the ground, tips touching y=0. Front faces +Z, head forward.
Required na... |
stage1-train-02307 | container or food | I need a low-poly falafel wrap. | Asset: Falafel wrap
Triangle budget: 550
Brief: Upright wrap standing on its base: a slightly tapered ivory flatbread tube open at the top, paper sleeve wrapped around the lower third, three sage-green lettuce frills and a few rust-brown falafel balls peeking from the opening, cream sauce drizzle over the top. Front fa... |
stage1-train-02308 | plant or nature | I need a small pile of low-poly fallen leaves. | Asset: Scattered fallen leaves
Triangle budget: 350
Brief: Three or four flat leaves lying on the ground, overlapping and slightly tilted so they touch, each a simple pointed oval blade with a raised centre vein and a short stem; mixed rust, brass and oak tones, facing +Z-ish with the pile open toward the viewer.
Requi... |
stage1-train-02309 | plant or nature | I need a low-poly fallen sapling. | Asset: Fallen sapling
Triangle budget: 400
Brief: A thin young tree lying on its side across the ground, trunk running along +Z with a small torn root ball at the back end (-Z), two broken branch stubs angled up, and a few sparse sage leaf clusters near the front tip. Slightly bent trunk, bark oak with darkWood root ba... |
stage1-train-02310 | plant or nature | I need a low-poly fallen log. | Asset: Fallen mossy trunk
Triangle budget: 400
Brief: A tree trunk lying horizontally along X, resting on the ground with a slight taper; a gnarled root flare splaying at one end, a lighter cut face at the other, two snapped branch stubs angled up and back. Bark in oak and darkWood, patches of sage moss on top.
Require... |
stage1-train-02311 | plant or nature | I need a low-poly fallen twig. | Asset: Fallen twig
Triangle budget: 250
Brief: A slender branch lying on the ground along the Z axis, slightly bent in the middle, with two short branch stubs and a single dry bud. Dark wood bark with a lighter oak break at one snapped end.
Required named parts: main_branch, stub_1, stub_2, bud, broken_end
```javascri... |
stage1-train-02312 | vehicle | Build a low-poly family minivan. | Asset: Family minivan
Triangle budget: 900
Brief: Boxy one-box minivan facing +Z: tall slab-sided body with a long flat roof, sloped front windshield and near-vertical rear hatch, four wheels tucked under the fenders, ivory glass band around the cabin, brass headlights. Navy body, black wheels.
Required named parts: bo... |
stage1-train-02313 | vehicle | Build a low-poly fan boat. | Asset: Fan boat
Triangle budget: 700
Brief: Airboat facing +Z: shallow flat-bottomed hull with a flat deck, a bench seat amidships, and an engine block at the stern driving a large propeller inside a circular iron cage, with two rudder fins behind the cage. Navy hull, oak deck and seat, iron engine and cage, brass hub ... |
stage1-train-02314 | animal | I need a low-poly fan-tailed turkey. | Asset: Fan-tailed turkey
Triangle budget: 800
Brief: Standing turkey facing +Z, plump rounded body on two short legs, small head on a curved neck with a red wattle and a brass beak, wings folded at the sides, and a broad upright fan of tail feathers rising behind (+Z body, fan spreading up and back). Body and fan in oa... |
stage1-train-02315 | animal | I need a low-poly fancy gerbil. | Asset: Fancy gerbil
Triangle budget: 450
Brief: Crouched gerbil on all fours facing +Z: plump rounded body, ivory belly patch underneath, small rounded head with pointed snout, two large round upright ears, tiny dark eyes, four short paws flat on the ground, long thin tail trailing back (-Z) and curving up slightly. Sa... |
stage1-train-02316 | bird, sea creature or bug | I need a low-poly fancy guppy. | Asset: Fancy guppy
Triangle budget: 500
Brief: Fancy guppy swimming toward +Z: small tapered body, huge fan-shaped tail sweeping up and back, tall dorsal fin, two small side pectoral fins, round black eyes. Rust body with navy tail fan and brass-tinged fin edges.
Required named parts: body, tail_fan, dorsal_fin, pector... |
stage1-train-02317 | bird, sea creature or bug | Build a low-poly payara fish. | Asset: Fanged payara
Triangle budget: 550
Brief: Long torpedo-bodied payara held level along the Z axis, belly near the ground and propped on its splayed pectoral fins. Iron-grey back fading to an ivory belly, a jutting lower jaw with two long ivory fangs pointing up past the snout, forked tail fin and a small dorsal f... |
stage1-train-02318 | bird, sea creature or bug | I need a low-poly fantail goldfish. | Asset: Fantail goldfish
Triangle budget: 550
Brief: Plump egg-shaped goldfish body facing +Z, small upturned mouth, two round eyes, a forked double fantail sweeping back and down (-Z), a small dorsal fin on top and two side pectoral fins. Warm rust-orange body with pale ivory fin tips.
Required named parts: body, tail_... |
stage1-train-02319 | architecture | Build a low-poly farm bunkhouse. | Asset: Farm bunkhouse
Triangle budget: 900
Brief: Small rectangular bunkhouse: plank walls with a gabled roof, front door centered on +Z, two shuttered windows flanking it, a small stoop step, and a squat chimney at the ridge. Oak walls, darkWood roof and trim, ivory shutters, iron chimney.
Required named parts: walls,... |
stage1-train-02320 | architecture | Build a low-poly creamery building. | Asset: Farm creamery
Triangle budget: 850
Brief: Small single-storey creamery, front facing +Z: ivory plank walls on an oak threshold, steep gabled roof in sage, centred plank door with brass handle, one small square window either side of the door, and a short square vent stack on the roof ridge.
Required named parts: ... |
stage1-train-02321 | architecture | I need a low-poly wooden farm gate. | Asset: Five-bar farm gate
Triangle budget: 500
Brief: Wooden five-bar gate: two upright end stiles, five horizontal rails between them, one diagonal brace across the lower bars, hung on a hinge post at the left side with an iron latch on the right. Oak with darkWood frame and iron hardware, front face +Z, bottom rail a... |
stage1-train-02322 | architecture | Build a low-poly farm office building. | Asset: Farm office
Triangle budget: 900
Brief: Small single-storey office: boxy ivory-plastered body, gabled darkWood roof with overhanging eaves, centered plank door with a step, two square windows flanking it, one brick chimney at the ridge. Door and windows on +Z facade.
Required named parts: building_body, roof, do... |
stage1-train-02323 | container or food | I need a low-poly farmers market tote. | Asset: Market tote
Triangle budget: 450
Brief: Upright open canvas tote with slightly sagging faceted sides, two arched handles rising from the rim, and a few vegetables poking above the opening. Ivory bag, sage handles, sage leaves with a rust root.
Required named parts: bag_body, handle_left, handle_right, veg_leaf_1... |
stage1-train-02324 | animal | I need a low-poly marmot. | Asset: Fat marmot
Triangle budget: 600
Brief: Plump marmot sitting upright on its haunches, chest forward, small round head with stubby ears, short front paws tucked at the chest, big flat hind feet, short bushy tail. Rust-brown coat with ivory belly patch. Front faces +Z.
Required named parts: body, head, ear_left, ea... |
stage1-train-02325 | animal | I need a low-poly fat-tailed gerbil. | Asset: Plump fat-tailed gerbil
Triangle budget: 500
Brief: Plump gerbil sitting low on the ground: rounded oval body slightly raised at the front, small rounded head with tiny upright ears, four short splayed legs, and a notably thick shortened tail trailing back (-Z). Sandy oak body, ivory belly and muzzle, darkWood t... |
stage1-train-02326 | vehicle | Build a low-poly fat-tire bicycle. | Asset: Fat-tire bicycle
Triangle budget: 900
Brief: Fat-tire bicycle facing +Z: two wide chunky wheels (front at +Z, rear at -Z) with fat dark tires, a low step-through frame in sage, a simple fork to the front axle, wide handlebars, and a small saddle. Pedals on a crank between the wheels, everything joined.
Required ... |
stage1-train-02327 | fantasy or game | Build a low-poly fate coin prop. | Asset: Fate coin
Triangle budget: 400
Brief: A thick brass coin standing upright on its edge, front face toward +Z, leaning slightly, with a raised rim ring around both faces, a dark inset face disc, and a five-point star emblem centered on the front. Flat-shaded 14-sided disc.
Required named parts: coin_body, rim, fac... |
stage1-train-02328 | furniture | I need a low-poly fax machine. | Asset: Office fax machine
Triangle budget: 450
Brief: Compact desktop fax: wedge-shaped iron body with a sloped front-top panel, a black keypad block and small dark display on that slope, an ivory handset lying in a cradle on the left side, and a paper tray at the back with one ivory sheet curling out the front slot. F... |
stage1-train-02329 | tool or gear | I need a low-poly feather duster. | Asset: Feathered duster
Triangle budget: 400
Brief: Upright duster standing on its handle end: slim turned oak handle from the ground to mid-height, a banded brass ferrule, then a splayed fan of flat feather blades flaring up and outward, ivory with rust and sage tips. A small loop at the very top.
Required named parts... |
stage1-train-02330 | fantasy or game | Build a low-poly feather quill. | Asset: Ink-stained quill
Triangle budget: 400
Brief: Quill leaning at a slight tilt with the nib touching the ground at +Z, tapered shaft rising back and up. Flat ivory vane split into two halves along the shaft, a brass band near the nib, and a dark ink-stained nib tip. No base, all parts joined.
Required named parts:... |
stage1-train-02331 | fantasy or game | Build a low-poly feather totem for a woodland fantasy game. | Asset: Feather totem
Triangle budget: 550
Brief: A short carved totem standing upright: a squared dark-wood post, wrapped near the top by a rust cord, with a small oak hawk-mask head facing +Z carrying a brass beak. Behind the head a fan of three broad flat feathers spreads upward — centre sage, flanking ones rust and ... |
stage1-train-02332 | tool or gear | I need a low-poly featherboard. | Asset: Featherboard
Triangle budget: 400
Brief: Workshop featherboard lying flat: a thick rectangular oak body with a curved fan of five tapered fingers along its front edge, angled slightly down and forward; a slot cut through the body with a brass knob and bolt rising from it. Fingers point +Z.
Required named parts: ... |
stage1-train-02333 | fantasy or game | Build a low-poly cockatrice creature. | Asset: Feathered cockatrice
Triangle budget: 850
Brief: Rooster-bodied cockatrice standing tall on two scaled legs: plump rust-brown feathered body, upright neck and head with a jagged black comb, brass hooked beak and hanging wattle, folded sage wings at the sides, a fanned tail of three long feathers, and a thin serp... |
stage1-train-02334 | animal | I need a low-poly goose. | Asset: Feathered goose
Triangle budget: 500
Brief: Standing goose facing +Z: rounded egg-shaped body with a short tail at the back, upright S-curved neck rising at the front, small head with a flat beak, two folded wings along the sides, two webbed feet flat on the ground. Ivory plumage, rust beak and feet.
Required na... |
stage1-train-02335 | animal | I need a low-poly turkey. | Asset: Feathered turkey
Triangle budget: 550
Brief: Plump turkey standing on two short legs, plump rust-brown body with folded wings, small head on a forward-leaning neck ending in a red wattle and snood, and a broad fanned tail of flat feather blades raised behind at -Z. Ivory feather tips, darkWood wings, black legs.... |
stage1-train-02336 | prop | I need a low-poly felt Christmas stocking. | Asset: Felt Christmas stocking
Triangle budget: 350
Brief: Hanging stocking: upright felt leg tube that bends forward at the ankle into a rounded toe pointing +Z, splayed slightly, with a wide ivory cuff band around the open top and a small loop for hanging at the back of the cuff. Rust felt body, ivory cuff.
Required ... |
stage1-train-02337 | vehicle | Build a low-poly felucca sailboat. | Asset: Nile felucca
Triangle budget: 550
Brief: Small lateen-rigged river boat, bow facing +Z: shallow curved wooden hull with a pointed bow and squared stern, a low deck, one tall mast raked slightly forward, a long yard angled steeply up from bow to stern-top, and a big triangular ivory sail hanging from the yard. Oa... |
stage1-train-02338 | bird, sea creature or bug | Build a low-poly female cardinal. | Asset: Female cardinal figure
Triangle budget: 450
Brief: Perched songbird with plump upright body, rounded head with a pointed crest, black face mask around a brass beak, folded wings, long tail angled down-back, thin dark legs gripping. Warm tan-rust plumage.
Required named parts: body, head, crest, beak, mask, tail,... |
stage1-train-02339 | prop | I need a low-poly fencing mask. | Asset: Fencing mask
Triangle budget: 500
Brief: Fencing mask resting upright: rounded iron mesh dome facing +Z, a stiff bib flaring down and forward below the jaw, ivory padded crown band over the top, and a dark strap wrapping the back of the head. Dark iron mesh, black strap.
Required named parts: face_mesh, bib, cro... |
stage1-train-02340 | architecture | Build a low-poly fender post for a dock. | Asset: Rope-wrapped fender post
Triangle budget: 400
Brief: Dock fender post: thick round oak post standing upright, slightly tapered, with a flat cap on top, two iron bands, and a coil of ivory rope wrapped around the middle. Front faces +Z.
Required named parts: post, cap, band_lower, band_upper, rope_coil
```javasc... |
stage1-train-02341 | plant or nature | I need a low-poly fennel bulb. | Asset: Fennel bulb
Triangle budget: 500
Brief: Fennel standing upright: fat rounded bulb with a few overlapping pale layer ridges, tapering to a short stem, three slender sage-green stalks rising and fanning slightly outward, each topped with a flat feathery frond plate. Bulb ivory, stalks and fronds sage.
Required nam... |
stage1-train-02342 | fantasy or game | I need a low-poly feral ghoul. | Asset: Hunched feral ghoul
Triangle budget: 800
Brief: Gaunt humanoid ghoul hunched forward at the hips, ribs showing on a narrow sunken torso, skull-like head thrust ahead on a bent neck, long thin arms hanging past the knees with clawed hands, bowed legs, a torn rag at the waist. Sickly pale sage-grey skin with dark ... |
stage1-train-02343 | fantasy or game | Build a low-poly feral owlbear. | Asset: Feral owlbear
Triangle budget: 950
Brief: Hunched quadruped owlbear: heavy bear body leaning forward on short thick legs, owl head with a hooked ivory beak, big round eyes, two swept-back feather tufts on the head, feathered chest ruff, black talons. Brown coat on the body, rust feathering on head and chest. Fac... |
stage1-train-02344 | architecture | I need a low-poly fermentation tank. | Asset: Brewery fermentation tank
Triangle budget: 700
Brief: Upright cylindroconical tank: tall iron cylinder body, shallow conical top and steep conical bottom, standing on three short splayed legs. A round manway door on the front (+Z) with a brass valve and pipe stub at the cone tip below.
Required named parts: body... |
stage1-train-02345 | plant or nature | I need a low-poly fern clump for a woodland floor. | Asset: Woodland fern clump
Triangle budget: 500
Brief: Clump of six arching fronds radiating out and upward from a small central crown at y=0, each frond a flat tapered stem with paired leaflets increasing then decreasing in size, tips curling slightly outward. All sage green, tips a paler tint. No plinth, fronds roote... |
stage1-train-02346 | plant or nature | Build a low-poly fern frond. | Asset: Arching fern frond
Triangle budget: 400
Brief: Single frond: a slender rachis rising from the ground and arching forward toward +Z, with four pairs of flat leaflet blades along it, each pair shorter than the one below, tipped by a small pointed blade. Sage green blades on a slightly darker stem.
Required named p... |
stage1-train-02347 | plant or nature | I need a low-poly fern leaf. | Asset: Arching fern frond
Triangle budget: 400
Brief: Single fern frond rooted at the ground, curving up and arching forward (+Z): a slim darkWood-to-sage rachis with paired leaflets running up it, longest near the base, tapering to a small tip leaflet. Leaflets are flat sage diamonds angled slightly upward and outward... |
stage1-train-02348 | plant or nature | Build a low-poly fern patch for my scene. | Asset: Woodland fern patch
Triangle budget: 500
Brief: Clump of arching fern fronds radiating from a short central crown at ground level; each frond is a tapered flat blade tilted up and outward, with the tallest fronds upright in the middle and shorter ones splaying lower. All sage green, darker toward the crown.
Requ... |
stage1-train-02349 | plant or nature | Build a low-poly fern shoot. | Asset: Fiddlehead fern shoot
Triangle budget: 400
Brief: Young fern: a slender sage stem rising from the ground, curling forward at the top into a tight inward-facing spiral fiddlehead, with two small low unfurling fronds splaying left and right. Flat-shaded sage green throughout.
Required named parts: stem, fiddlehead... |
stage1-train-02350 | plant or nature | I need a low-poly fern stem. | Asset: Arched fern frond
Triangle budget: 250
Brief: A single fern frond seen from the side: tapered stem (rachis) arching up and forward from the ground and curving over at the tip, with three pairs of flat pointed leaflets splaying out along its upper half plus a small tip leaflet. Sage green, slightly darker stem.
R... |
stage1-train-02351 | tool or gear | Build a low-poly ferro rod fire starter. | Asset: Ferro fire starter
Triangle budget: 350
Brief: Upright ferrocerium fire starter: darkWood handle at the base with a brass ferrule, a slim iron rod rising above, and a small flat steel striker hanging on a short cord from the handle, resting near the ground. Front faces +Z.
Required named parts: handle, ferrule, ... |
stage1-train-02352 | vehicle | I need a low-poly ferry boat. | Asset: Harbour ferry
Triangle budget: 700
Brief: Small harbour ferry, bow toward +Z: flat-bottomed navy hull with a raised pointed bow, oak deck planking on top, a long ivory cabin block amidships, a small wheelhouse perched above its front, and a rust funnel with a black band toward the stern. Sits with the hull botto... |
stage1-train-02353 | vehicle | Build a low-poly broadcast fertilizer spreader. | Asset: Push fertilizer spreader
Triangle budget: 700
Brief: Push spreader cart facing +Z: a tapered open hopper above a flat frame, two spoked wheels on a cross axle at the rear, a spinner disc under the hopper mouth, and a push handle rising back at -Z with a control lever on it. Iron body, oak handle, brass lever, bl... |
stage1-train-02354 | plant or nature | Build a low-poly ficus tree. | Asset: Leafy ficus tree
Triangle budget: 700
Brief: Broadleaf ficus tree: short darkWood trunk with a low root flare, two short branches, and three offset rounded sage canopy clusters. A pair of thin aerial root strands hang from the lower canopy back to the trunk; front faces +Z.
Required named parts: trunk, root_flar... |
stage1-train-02355 | plant or nature | Build a low-poly fiddlehead fern. | Asset: Fiddlehead fern shoot
Triangle budget: 350
Brief: A single young fern shoot: slender sage stem rising from the ground and curving forward (+Z) at the top into a tight spiral coil, with three small leaflets along the lower stem. Flat-shaded sage green, coil slightly darker.
Required named parts: stem, coil, leaf_... |
stage1-train-02356 | bird, sea creature or bug | Build a low-poly fiddler crab. | Asset: Fiddler crab
Triangle budget: 700
Brief: Fiddler crab resting on the ground: wide flat carapace slightly domed, two short eye stalks poking up at the front, one oversized claw held up beside the body and one tiny claw tucked in, four thin walking legs per side splayed outward. Rust carapace with a brass oversize... |
stage1-train-02357 | tool or gear | I need a low-poly pair of binoculars. | Asset: Field binoculars
Triangle budget: 400
Brief: Porro-prism binoculars: two parallel tapered barrels joined by a central bridge, small eyecups at the back (-Z) and wider objective lens rims at the front (+Z), angular hinge ridge between the tubes. Iron body with brass rims.
Required named parts: barrel_left, barrel... |
stage1-train-02358 | prop | I need a low-poly field hockey stick. | Asset: Field hockey stick
Triangle budget: 250
Brief: Hockey stick standing upright, shaft leaning slightly with the curved toe of the head resting on the ground facing +Z. Slender tapered shaft in oak with a darkWood grip wrap at the top and a flattened curved blade at the base.
Required named parts: shaft, grip, blad... |
stage1-train-02359 | animal | Build a low-poly field mouse. | Asset: Field mouse
Triangle budget: 400
Brief: Small crouching mouse: low rounded body, pointed snout head forward (+Z), two round ears, four tiny legs, a long thin tail curving back and up. Warm brown coat with pale ivory belly. Faceted low-poly.
Required named parts: body, head, ear_left, ear_right, leg_front_left, l... |
stage1-train-02360 | plant or nature | Build a low-poly fig on a branch. | Asset: Fig on a branch
Triangle budget: 350
Brief: Short gnarled branch segment angled slightly upward, with one ripe fig hanging beneath it on a stubby stem and two broad sage leaves sprouting from the branch. Fig body a teardrop bulb with a small nub at the tip; deep purple skin, darkWood branch, sage foliage.
Requir... |
stage1-train-02361 | plant or nature | Build a low-poly fig tree. | Asset: Broadleaf fig tree
Triangle budget: 750
Brief: Short thick gnarled oak trunk splitting into two angled branches that spread a wide flattened canopy of clustered sage-green foliage blobs. A few navy figs hang low under the leaves. Grounded at y=0, canopy front-facing +Z.
Required named parts: trunk, branch_left, ... |
stage1-train-02362 | prop | Build a low-poly film projector. | Asset: Vintage film projector
Triangle budget: 650
Brief: Tabletop film projector: boxy navy housing standing on four short black feet, two vertical disc film reels side by side on a raised iron arm above the body, and a cylindrical iron lens barrel projecting forward (+Z) with a brass rim.
Required named parts: body, ... |
stage1-train-02363 | tool or gear | I need a low-poly filter socket tool. | Asset: Oil filter socket
Triangle budget: 500
Brief: Cylindrical cup-shaped socket standing upright on its closed end, open rim facing up (+Y), inner wall ringed with evenly spaced flutes, and a square drive recess in the base. Iron with brass rim.
Required named parts: socket_body, flutes, rim, drive_recess
```javasc... |
stage1-train-02364 | container or food | Build a low-poly financier cake. | Asset: Golden financier
Triangle budget: 400
Brief: Small rectangular French almond cake sitting flat: a stubby tapered block body, a gently domed golden top crown, and a light ivory dusting across the crown. Warm oak body with brass top, facing +Z.
Required named parts: cake_body, cake_top, dusting
```javascript
func... |
stage1-train-02365 | tool or gear | Build a low-poly fine detail brush. | Asset: Fine detail brush
Triangle budget: 250
Brief: Slender artist's brush standing upright with a slight lean: tapered oak handle, short brass ferrule, and a small pointed tuft of sage bristles at the top. Thin and delicate, every part connected.
Required named parts: handle, ferrule, bristles
```javascript
function... |
stage1-train-02366 | container or food | I need a low-poly fine mesh strainer. | Asset: Fine mesh strainer
Triangle budget: 450
Brief: Round strainer: shallow hemispherical fine-mesh bowl facing up, flat rim ring around its mouth, a straight handle extending back (-Z) with a small hanging loop at the tip. Iron mesh bowl, brass rim, oak handle.
Required named parts: mesh_bowl, rim_ring, handle, hand... |
stage1-train-02367 | bird, sea creature or bug | Build a low-poly finger coral. | Asset: Finger coral cluster
Triangle budget: 400
Brief: Upright coral clump: a squat lumpy base mound with six to eight stubby cylindrical fingers of varying heights fanning upward and slightly outward, blunt rounded tips. Sage body with ivory tips, all fingers rooted into the base.
Required named parts: base, finger_1... |
stage1-train-02368 | architecture | Build a low-poly finishing barn. | Asset: Timber finishing barn
Triangle budget: 900
Brief: Long low gable-roofed barn: rectangular plank walls with a gable end facing +Z, big sliding door on the front, small dark vent slits high in the gable, low side windows, roof overhanging the eaves. Oak walls, darkWood trim, rust roof, navy door, ivory vent.
Requi... |
stage1-train-02369 | plant or nature | Build a low-poly fir tree. | Asset: Fir tree
Triangle budget: 400
Brief: Upright woodland fir: short dark trunk at ground, three stacked conical tiers decreasing in size upward, each a flat-shaded faceted cone with slight overlap at the seams; sage green foliage, dark wood trunk. Stands straight, front symmetric.
Required named parts: trunk, tier_... |
stage1-train-02370 | prop | I need a low-poly fire alarm box. | Asset: Red fire alarm pull box
Triangle budget: 350
Brief: Wall-mounted fire alarm pull station facing +Z: a shallow red rectangular body with a raised ivory face plate, a brass pull handle on a short lever protruding forward and down, plus a slim dark border trim. Flat red body, iron accents.
Required named parts: bod... |
stage1-train-02371 | bird, sea creature or bug | I need a low-poly fire ant. | Asset: Fire ant
Triangle budget: 550
Brief: Ant standing on six splayed legs: rounded head facing +Z with two elbowed antennae, narrow waist node, small thorax, and a large bulbous gaster tilting up at the back (-Z). Rust body with black legs and antennae, flat-shaded.
Required named parts: head, thorax, gaster, antenn... |
stage1-train-02372 | animal | I need a low-poly fire-bellied toad. | Asset: Fire-bellied toad
Triangle budget: 500
Brief: Squat wide toad, flat broad back with splayed limbs, front faces +Z. Dark charcoal back and head with a rust-orange belly patch showing underneath, small brass eyes, four stubby splayed legs resting on the ground, no tail.
Required named parts: body, belly, eye_left,... |
stage1-train-02373 | tool or gear | Build a low-poly pair of fire bellows. | Asset: Weathered fire bellows
Triangle budget: 450
Brief: Two paddle-shaped oak boards hinged at the back (-Z), tapering to a short darkWood nozzle at the front (+Z); a gathered ivory hide bag sits between the boards, and two handles extend back past the iron hinge. Boards slightly open at the front.
Required named par... |
stage1-train-02374 | fantasy or game | Build a low-poly fire elemental. | Asset: Cinder fire elemental
Triangle budget: 800
Brief: Hunched flame-bodied elemental standing on a smouldering coal base at ground level: a squat rounded body tapering upward into a three-tongue flame crest, two stubby flame arms held out, two small black coal eyes set in the front of the body. Rust-orange body with... |
stage1-train-02375 | fantasy or game | I need a low-poly fire giant. | Asset: Molten fire giant
Triangle budget: 900
Brief: Hulking fire giant standing with feet apart, long heavy arms hanging near the knees, small head low between broad shoulders, crude iron shoulder plate and belt, gripping a stubby oak club in the right hand. Rust skin, black iron, brass buckle.
Required named parts: t... |
stage1-train-02376 | vehicle | Build a low-poly fire ladder truck. | Asset: Fire ladder truck
Triangle budget: 800
Brief: Fire ladder truck facing +Z: boxy rust-red chassis with a taller cab at the front and a flat rear deck, four dark iron wheels, and a single ladder angled up over the rear deck toward -Z. Brass trim and ivory window panes on the cab.
Required named parts: chassis, cab... |
stage1-train-02377 | architecture | Build a low-poly fire lookout tower. | Asset: Fire lookout tower
Triangle budget: 900
Brief: Small wooden lookout: four splayed darkWood legs joined by cross-braces, a square oak platform with a low railing, a compact cabin with ivory window panes on the front face, a sage pitched roof overhanging the cabin, and a ladder up the front (+Z).
Required named pa... |
stage1-train-02378 | fantasy or game | Build a low-poly fire rune stone. | Asset: Rune of embers
Triangle budget: 500
Brief: Upright chipped stone tablet, roughly slab-shaped with a slightly wider base, leaning a touch; a raised flame glyph carved on the front (+Z) face in warm ember orange, with three small ember shards clustered at its foot, iron rim band across the top. Rust-tinged dark st... |
stage1-train-02379 | animal | Build a low-poly fire salamander. | Asset: Fire salamander
Triangle budget: 500
Brief: Salamander resting flat, belly near ground, nose facing +Z: long low rounded body, blunt wide head with two small black eyes, four short splayed legs with flat toes, thick tail tapering back to -Z and slightly raised. Glossy black body with a few flat rust blotches on ... |
stage1-train-02380 | architecture | Build a low-poly fire station building. | Asset: Small fire station
Triangle budget: 900
Brief: Compact single-storey station: rectangular ivory hall with a shallow navy gabled roof overhanging at the front, one wide rust-red garage door centred on the front (+Z), a small darkWood personnel door to its left, and a short square hose tower rising at the back cor... |
stage1-train-02381 | fantasy or game | Build a low-poly fire suppression bot. | Asset: Weathered fire-suppression bot
Triangle budget: 700
Brief: Chunky iron chassis on two side wheels, a stubby brass nozzle arm angled forward (+Z) with a wide muzzle, a rust-red cylindrical tank strapped on its back, and a small beacon lamp on top. Iron body, brass fittings, rust tank.
Required named parts: chassi... |
stage1-train-02382 | fantasy or game | I need a low-poly fireball scroll. | Asset: Fireball scroll
Triangle budget: 500
Brief: Partly unrolled parchment sheet standing upright and gently curved toward +Z, rolled edges gripped by two vertical wooden dowels at left and right, with a small rust flame emblem floating on the sheet's front face and a thin brass tie band across the lower middle. Ivor... |
stage1-train-02383 | vehicle | Build a low-poly fireboat. | Asset: Little fireboat
Triangle budget: 700
Brief: Sturdy harbor fireboat floating level at y=0: rust-red hull with a pointed bow facing +Z, flat deck, ivory wheelhouse set back with a small brass water monitor on the bow deck and a short iron mast with a tiny flag-less crossbar atop the cabin.
Required named parts: hu... |
stage1-train-02384 | prop | I need a low-poly bundle of firecrackers. | Asset: Firecracker bundle
Triangle budget: 500
Brief: Upright bundle of five short rust-red paper tubes (8-sided cylinders) packed tight in a hex cluster, cinched by a brass band near the middle, with a single black braided fuse rising from the top centre and curling outward. Stands on the ground at y=0.
Required named... |
stage1-train-02385 | vehicle | Build a low-poly firefighting plane. | Asset: Water-bomber seaplane
Triangle budget: 900
Brief: Nose faces +Z, floats resting on the ground at y=0. Chunky fuselage with a stepped hull belly, straight high-mounted wings, single tail fin with horizontal tailplane, two long pontoons on struts, and a spinning propeller cone at the nose. Ivory fuselage, rust win... |
stage1-train-02386 | bird, sea creature or bug | Build a low-poly firefly. | Asset: Glowing firefly
Triangle budget: 400
Brief: Firefly perched with wings folded slightly open: small segmented body (dark head, iron thorax, ivory glowing abdomen tip), two flat wing plates angled up, two thin antennae forward, six short legs tucked under. Faces +Z, hovering just above ground.
Required named parts... |
stage1-train-02387 | prop | Build a low-poly fireman pole. | Asset: Brass fireman pole
Triangle budget: 300
Brief: Vertical brass pole running ground to ceiling: flat iron mounting flange at the base and a matching collar plate at the top, plus a couple of raised brass collars partway up the shaft. Straight, upright.
Required named parts: floor_flange, pole, collar_1, collar_2, ... |
stage1-train-02388 | bird, sea creature or bug | I need a low-poly firemouth cichlid fish. | Asset: Firemouth cichlid
Triangle budget: 500
Brief: Swimming fish, horizontal along +Z with head forward, deep oval body tapering to tail; spiky dorsal fin along the back, forked tail fin, small pectoral fins on each flank; rust throat and belly patch under an iron-grey body, navy fins, black eyes.
Required named part... |
stage1-train-02389 | furniture | I need a low-poly fireproof document safe. | Asset: Fireproof document safe
Triangle budget: 400
Brief: Upright boxy safe facing +Z: thick iron body with a slightly recessed door on the front, a brass combination dial at the door's centre, a short horizontal handle bar below it, and four small feet lifting the body off the ground. Iron body, brass fittings, black... |
stage1-train-02390 | tool or gear | Build a low-poly firewood carrier. | Asset: Canvas firewood carrier
Triangle budget: 500
Brief: Carrier sitting on the ground, front +Z: a trough of ivory canvas with two upright oak side panels and a bent wooden handle arcing overhead. Inside the trough, three stacked logs poke above the rim. Iron rivets at the handle joints.
Required named parts: handle... |
stage1-train-02391 | prop | Build a low-poly firework rocket. | Asset: Fairground firework rocket
Triangle budget: 350
Brief: Upright firework rocket: vertical paper tube body, pointed nose cone on top, a slim wooden guide stick running parallel along one side down to the ground, two brass bands wrapping the tube and a short ivory fuse curling out near the base. Navy body, rust nos... |
stage1-train-02392 | furniture | I need a low-poly first aid cabinet. | Asset: First aid cabinet
Triangle budget: 300
Brief: Wall-mounted first aid cabinet: shallow box body with a hinge-side and a front door that hangs slightly ajar, small brass knob, rust-red cross emblem on the door face, one internal shelf visible in the gap. Ivory body, iron frame.
Required named parts: cabinet_body, ... |
stage1-train-02393 | tool or gear | I need a low-poly first aid kit. | Asset: First aid kit
Triangle budget: 350
Brief: Compact boxy medical case sitting flat: rectangular ivory body with a slightly overhanging lid, a folding carry handle on top, a brass latch on the front face, and a rust-red cross emblem centred on the lid. Sits closed, facing +Z.
Required named parts: case_body, lid, h... |
stage1-train-02394 | architecture | Build a low-poly fish auction house. | Asset: Weather-beaten fish auction house
Triangle budget: 950
Brief: Small timber auction hall facing +Z: long rectangular body under a steep gable roof, wide open front bay with a sagging awning over a counter, a few stacked crates beside the door and a squat chimney at one roof end. Oak walls, darkWood frames and roo... |
stage1-train-02395 | container or food | Build a low-poly fish burger. | Asset: Toasted fish burger
Triangle budget: 400
Brief: Stacked burger facing +Z: flat round bottom bun, a thick breaded fish fillet slightly overhanging, a ruffled sage lettuce layer, and a domed sesame-topped bun. Warm oak buns, ivory fish, sage lettuce, a few brass sesame seeds.
Required named parts: bun_bottom, fish... |
stage1-train-02396 | architecture | Build a low-poly fish drying rack. | Asset: Fish drying rack
Triangle budget: 700
Brief: A-frame wooden drying rack: two splayed A-frame end legs joined by a horizontal ridge pole along X, a lower spreader bar between the frames, three small fish hung head-up from the ridge pole. Oak frame with darkWood joints, fish in muted iron-navy tones.
Required name... |
stage1-train-02397 | animal | Build a low-poly gharial, the fish-eating crocodile. | Asset: Basking gharial
Triangle budget: 700
Brief: Gharial lying low, body flat along Z facing +Z: long boxy torso, a very long narrow snout with a small bulbous tip (the ghara bump), a tapering tail behind (-Z), and four short splayed legs flat to the ground. Sage green body, iron underbelly, darkWood eye ridges.
Requ... |
stage1-train-02398 | prop | I need a low-poly fish hook. | Asset: Iron fish hook
Triangle budget: 250
Brief: Upright iron fish hook lying in the XY plane facing +Z: a small brass eye loop at the top, a straight vertical shank, then a J-bend at the bottom that curves up into a sharp point with a single barb on its inner side. Flat iron #536c70 with brass #bc974a eye.
Required n... |
stage1-train-02399 | architecture | Build a low-poly fish market hall. | Asset: Fish market hall
Triangle budget: 900
Brief: Open timber market hall: four oak corner posts on a low dark-wood sill, open front (+Z) with a thick ivory counter slab across the front bay, low back and side walls of dark planks, gabled navy roof with overhanging eaves and an exposed oak ridge beam. A small rust-an... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.