id
stringlengths
18
18
category
stringclasses
10 values
prompt
stringlengths
21
68
response
stringlengths
1.18k
11.4k
stage1-train-02100
furniture
Build a low-poly flatbed document scanner.
Asset: Office document scanner Triangle budget: 400 Brief: Flatbed scanner lying flat: low rectangular ivory body with a slightly raised hinged lid at the back (-Z), an inset glass bed visible between them, small dark control strip with a button on the front edge (+Z). Lid navy, trim iron, stand feet low. Required name...
stage1-train-02101
prop
Build a low-poly dog agility hoop.
Asset: Agility training hoop Triangle budget: 450 Brief: Agility hoop facing +Z: a large open ring raised upright, held by two short side posts clamping it at left and right, standing on a flat crossbar base. Ring in ivory with iron posts and oak base. Required named parts: ring, post_left, post_right, base_bar, clamp_...
stage1-train-02102
prop
I need a low-poly dog waste bin for a park.
Asset: Park dog waste bin Triangle budget: 400 Brief: Hooded park bin: small square post rising from a flat foot plate, a boxy iron bin body mounted on it, a sloping lid hood over the top with a dark front opening flap. Iron body with navy panels and a brass band. Required named parts: foot_plate, post, bin_body, hood,...
stage1-train-02103
architecture
Build a low-poly Dogon mud house.
Asset: Dogon mud house Triangle budget: 700 Brief: Rectilinear mudbrick house facing +Z: tall blocky earthen body with slightly battered walls, flat roof with a low parapet rim, a row of projecting wooden log ends across the upper facade, and one small dark doorway at ground level. Earth-brown walls, dark wood logs, bl...
stage1-train-02104
plant or nature
Build a low-poly dolomite crag.
Asset: Pale dolomite crag Triangle budget: 700 Brief: Angular pale rock formation: a tall blocky main mass with tilted planar faces, a lower buttress leaning against its front-right side, two stepped ledge slabs jutting out, and a smaller outcrop block near the top. Ivory stone with sage moss patches on upward faces. R...
stage1-train-02105
plant or nature
Build a low-poly dolomite rock pinnacle.
Asset: Pale dolomite pinnacle Triangle budget: 700 Brief: Upright weathered rock spire: a broad talus mound at ground level, a tall faceted tapering column rising from it, two small jutting ledges near mid-height, and a slightly offset angular cap at the top. Pale ivory faces with iron-grey shadow strata; all blocks fu...
stage1-train-02106
animal
I need a low-poly dolphin-like ichthyosaur.
Asset: Leaping ichthyosaur Triangle budget: 700 Brief: Streamlined marine reptile gliding horizontally along Z: torpedo body with a long tapered snout pointing +Z, crescent tail fluke at the raised -Z end, small triangular dorsal fin on top, two swept-back pectoral flippers at the sides. Iron-blue back with an ivory un...
stage1-train-02107
vehicle
Build a low-poly dome car for a toy train.
Asset: Dome observation car Triangle budget: 900 Brief: Passenger railcar on four wheels with a raised glass observation dome on the roof: long navy body with ivory window band, brass end rails and roof trim. Sits on two bogies, front faces +Z. Required named parts: body, window_band, dome, dome_frame, roof, bogie_fron...
stage1-train-02108
furniture
I need a low-poly dome ceiling light.
Asset: Dome ceiling light Triangle budget: 350 Brief: Dome ceiling light facing +Z, modelled with its open shade at y=0: hemisphere dome shade (ivory outside, iron inner ring) over a flat brass rim, a short brass stem above topped by a round mount plate. Clean planar silhouette, open bottom, no chain. Required named pa...
stage1-train-02109
prop
Build a low-poly dome climber.
Asset: Geodesic dome climber Triangle budget: 750 Brief: Playground climbing dome: hemispherical frame on the ground, six iron tube ribs arcing from a brass base ring up to a brass apex hub, crossed by two horizontal rings; slim anchor feet at each rib base. Iron with brass joints. Required named parts: base_ring, rib_...
stage1-train-02110
animal
Build a low-poly dome-headed dinosaur.
Asset: Domed pachycephalosaur Triangle budget: 800 Brief: Bipedal pachycephalosaur standing with tail raised back (-Z), body leaning forward, thick domed skull tilted slightly down, short snout, tiny front arms, stout hind legs. Sage body, ivory dome and snout tip, darkWood hooves and claws; faces +Z. Required named pa...
stage1-train-02111
furniture
I need a low-poly dome pendant lamp.
Asset: Dome pendant lamp Triangle budget: 350 Brief: Hanging pendant lamp on a vertical axis: small round ceiling canopy at the top, thin cord dropping down, wide flat-bottomed dome shade opening downward, with an ivory bulb and short socket visible inside the dome. Iron shade with a brass canopy and rim ring. Required...
stage1-train-02112
architecture
Build a low-poly domed mosque.
Asset: Domed mosque Triangle budget: 900 Brief: Square prayer hall with a low arched doorway centered on the +Z facade, a cylindrical drum carrying a hemisphere dome, and two slender minarets flanking the front corners each capped with a small dome. Ivory walls, sage dome and minaret caps, brass finial and door trim. R...
stage1-train-02113
prop
Build a low-poly domino tile.
Asset: Domino tile Triangle budget: 350 Brief: A flat rectangular domino lying face up: ivory slab with slightly rounded edges, a dark divider groove across the middle, and recessed black pips — four on one half, two on the other — sitting just proud of the face. Required named parts: tile_body, divider, pips_upper_1, ...
stage1-train-02114
container or food
Build a low-poly double bacon burger.
Asset: Double bacon burger Triangle budget: 700 Brief: Stacked burger sitting flat on the ground: domed top bun, two thick patties each capped with a melted cheese slice, wavy bacon strips between layers, flat bottom bun. Toasted oak buns, darkWood patties, brass cheese, rust bacon. Required named parts: bun_bottom, pa...
stage1-train-02115
vehicle
Build a low-poly double-decker coach.
Asset: Double-decker coach Triangle budget: 950 Brief: Boxy double-decker bus facing +Z: tall two-storey slab body with a slightly inset upper deck, flat roof, long side window bands in ivory, navy lower body with a rust waist stripe, and four iron wheels with dark tyre blocks tucked under the chassis. Simple slab-ende...
stage1-train-02116
furniture
I need a low-poly double-door fridge.
Asset: Ivory double-door refrigerator Triangle budget: 500 Brief: Upright boxy fridge facing +Z, taller than wide, flat top with a small chamfer; two full-height doors split down the centre, each with a slim vertical iron handle beside the middle gap, a narrow iron grille strip low on the front, and four short stubby f...
stage1-train-02117
prop
Build a low-poly double parking meter.
Asset: Twin parking meter Triangle budget: 450 Brief: Iron curbside meter: round stepped base, single slender post, a flat crossbar housing at the top carrying two side-by-side meter heads, each a rounded-rectangular casing with a brass-trimmed domed cap and an ivory dial face facing +Z. Required named parts: base, pos...
stage1-train-02118
vehicle
Build a low-poly double-stack container rail car.
Asset: Double-stack container car Triangle budget: 750 Brief: Well car: long low flat deck sitting in a recessed well on two bogies with four visible wheels each, couplers at both ends (+Z/-Z), and two ribbed shipping containers stacked squarely on the deck — lower one iron, upper one rust. Sits on ground at y=0, long ...
stage1-train-02119
furniture
I need a low-poly double vanity.
Asset: Double vanity Triangle budget: 700 Brief: Wall-free standing vanity: rectangular cabinet body with two door fronts, a flat overhanging countertop, two oval basins sunk into it side by side, and a short tap behind each basin. Ivory counter, oak cabinet, brass taps and iron handles. Required named parts: cabinet, ...
stage1-train-02120
container or food
I need a low-poly dough scraper.
Asset: Dough scraper Triangle budget: 250 Brief: Bench scraper standing on its long straight blade edge: a thin flat iron rectangle, slightly wider than tall, with a rounded oak handle bar mounted horizontally along the top edge. Blade sits flush on the ground at y=0, flat face toward +Z. Required named parts: blade, h...
stage1-train-02121
plant or nature
Build a low-poly Douglas fir tree.
Asset: Tall Douglas fir Triangle budget: 400 Brief: Upright conifer with a short darkWood trunk at the base and three stacked sage cone tiers, widest at the bottom and narrowing to a pointed tip; tiers overlap slightly so the whole silhouette reads as one connected tree. Front faces +Z, ground at y=0. Required named pa...
stage1-train-02122
bird, sea creature or bug
Build a low-poly Dover sole.
Asset: Dover sole Triangle budget: 400 Brief: Flatfish lying flat on the ground, head facing +Z: a wide flattened oval body disc with a thin rounded edge, small fanned tail fin at the back, a low fringe of dorsal and anal fin along the sides, and both eyes sitting on the upper face near the front with a tiny off-centre...
stage1-train-02123
tool or gear
I need a low-poly dovetail jig.
Asset: Dovetail jig Triangle budget: 500 Brief: Bench dovetail jig: flat oak base plate with two raised side rails, a row of four angled guide fingers standing between them, a clamp bar across the front held by two brass knobs. Dark wood rails, oak body, iron finger tips. Required named parts: base_plate, side_rail_lef...
stage1-train-02124
tool or gear
I need a low-poly dovetail saw.
Asset: Dovetail saw Triangle budget: 350 Brief: Small backsaw lying flat on the ground, blade pointing +Z, open pistol-grip handle at the back (-Z). Thin tapered iron blade with a brass back spine along its top edge, dark wood handle with two brass bolts. Required named parts: handle, blade, back_spine, bolt_1, bolt_2 ...
stage1-train-02125
tool or gear
I need a low-poly dowel pin.
Asset: Wooden dowel pin Triangle budget: 200 Brief: Short cylindrical hardwood dowel lying along +Z: 8-sided shaft with softly chamfered ends, straight and uniform, no text. Oak body with slightly darker chamfer rings. Required named parts: pin_shaft, chamfer_front, chamfer_back ```javascript function buildAsset(THREE...
stage1-train-02126
tool or gear
Build a low-poly dowel plate.
Asset: Iron dowel plate Triangle budget: 350 Brief: Bench dowel plate: a thick flat rectangular iron plate lying level, with a row of three round holes across its face shown as recessed dark discs with slight raised rims, and short splayed corner feet lifting it a touch off the ground. Iron with brass-rimmed holes. Req...
stage1-train-02127
furniture
I need a low-poly downdraft vent.
Asset: Retractable downdraft vent Triangle budget: 400 Brief: Kitchen downdraft vent shown half-raised: a squat rectangular housing box on the ground, a narrower telescoping vent column rising from it, capped by a flat intake head with a slotted black grille facing +Z and a slim brass control strip on the front of the ...
stage1-train-02128
tool or gear
Build a low-poly drafting compass.
Asset: Brass drafting compass Triangle budget: 350 Brief: Divider compass standing slightly open: two tapered iron legs meeting at a brass hinge knob at the top, one leg tipped with a needle point, the other holding a short pencil stub, small brass adjustment wheel on the hinge. Front faces +Z. Required named parts: le...
stage1-train-02129
vehicle
Build a low-poly dragline excavator.
Asset: Dragline excavator Triangle budget: 900 Brief: Small tracked dragline: low rectangular crawler track base, boxy rotating house with a short cab window block, one long boom raked up and forward (+Z), a scoop bucket hanging below the boom tip on two straight cables. Rust house, iron tracks, black bucket tips and b...
stage1-train-02130
plant or nature
Build a low-poly dragon blood tree.
Asset: Dragon blood tree Triangle budget: 700 Brief: Umbilical-crowned dragon blood tree: short thick trunk splitting into a few upward-fanning bare branches, topped by a flat wide umbrella canopy of dense foliage; sage green crown over oak trunk. No base, roots meet ground at y=0. Required named parts: trunk, branch_1...
stage1-train-02131
vehicle
Build a low-poly dragon boat.
Asset: Dragon boat Triangle budget: 900 Brief: Long narrow flat-bottomed hull with a raised prow: a rust dragon head with darkWood horns and brow sits at the bow facing +Z, a curling darkWood tail sweeps up at the stern (-Z); two oak cross benches inside, ivory oars stowed along the gunwales with brass trim strips. Req...
stage1-train-02132
fantasy or game
Build a low-poly dragon fang dagger.
Asset: Dragon fang dagger Triangle budget: 400 Brief: Short dagger standing point-up: curved ivory fang blade tapering to a point, small brass crossguard, dark wood grip with rust cord wrap, brass pommel. Flat, chunky fantasy silhouette, front facing +Z, roughly 40cm scale. Required named parts: blade, guard, grip, wra...
stage1-train-02133
fantasy or game
I need a low-poly dragon scale.
Asset: Dragon scale shard Triangle budget: 300 Brief: A single shed dragon scale: broad teardrop plate with the convex outer face toward +Z, tapering to a point at the top and a small broken root nub at the bottom resting on the ground. A raised central keel ridge runs up the middle, with a darker rim along the lower e...
stage1-train-02134
fantasy or game
Build a low-poly dragon scale shield.
Asset: Dragon scale shield Triangle budget: 700 Brief: Round/oval heater shield facing +Z, gentle convex face covered in overlapping rows of scale plates, iron rim band and a brass boss at centre with a short back grip bar. Sage and navy scales, iron rim, brass boss. Required named parts: shield_body, scale_rows_1, sca...
stage1-train-02135
fantasy or game
Build a low-poly dragon skull.
Asset: Dragon skull Triangle budget: 700 Brief: Bleached dragon skull resting on the ground: bulky cranium at the back, long tapering snout forward (+Z) tilted slightly down, separate lower jaw slightly open, two swept-back horns above the jaw hinge, dark eye-socket cavities, a row of simple teeth. Ivory bone with blac...
stage1-train-02136
tool or gear
I need a low-poly dragonbone bow.
Asset: Dragonbone bow Triangle budget: 550 Brief: Bow standing upright with its lower limb tip on the ground, belly facing +Z, string vertical at the back (-Z). Two long gently-curved limbs of pale ivory bone tapering to iron nocks, joined at a dark leather-wrapped grip, with a pair of small bone spurs jutting from eac...
stage1-train-02137
tool or gear
I need a low-poly drain plug wrench.
Asset: Drain plug wrench Triangle budget: 300 Brief: T-handle socket wrench standing upright: horizontal crossbar grip at the top, a slender vertical shaft down to a short hexagonal socket head at the bottom, with a small brass collar ring where the shaft meets the socket. Iron with brass trim. Required named parts: ha...
stage1-train-02138
architecture
Build a low-poly drawbridge gatehouse.
Asset: Drawbridge gatehouse Triangle budget: 1000 Brief: Small castle gatehouse: two square crenellated flanking towers joined by a central span over a dark gate arch, an iron portcullis in the opening, and an oak drawbridge lowered forward (+Z) on two chains. Stone-grey towers with oak bridge planks and iron chains. R...
stage1-train-02139
furniture
Build a low-poly drawer base cabinet.
Asset: Oak drawer cabinet Triangle budget: 600 Brief: Base cabinet standing on four short square legs: a plain box carcass, a slightly overhanging flat top, and three stacked equal-height drawer fronts on the +Z face, each with a small centred brass bar handle. Required named parts: carcass, top, drawer_front_1, drawer...
stage1-train-02140
container or food
I need a low-poly drawer food organizer.
Asset: Drawer food organizer Triangle budget: 400 Brief: Shallow open rectangular tray sitting flat with four low walls, two cross dividers splitting it into three compartments, and a small front lip handle at +Z. Oak body with dark wood dividers, front face +Z. Required named parts: tray_base, wall_left, wall_right, w...
stage1-train-02141
tool or gear
Build a low-poly drawing board on a stand.
Asset: Tilted drawing board Triangle budget: 500 Brief: Artist's drawing board: a rectangular ivory board tilted back about 20°, framed in oak with a raised oak ledge across its bottom edge and a small brass clip at the top centre. Stands on two splayed front legs joined by a crossbar, with a single angled rear leg bra...
stage1-train-02142
tool or gear
I need a low-poly drawknife.
Asset: Woodworker's drawknife Triangle budget: 350 Brief: Drawknife lying flat, blade edge down: a long straight iron blade with a slight bevel, two tangs bending back at each end into short turned wooden handles that point rearward (-Z). Brass ferrules at the handle joints. Required named parts: blade, tang_left, tang...
stage1-train-02143
container or food
I need a low-poly drawstring bento bag.
Asset: Drawstring bento bag Triangle budget: 450 Brief: Soft fabric pouch sitting upright on the ground: rounded bulging body cinched to a narrow gathered neck, a drawstring cord looped through the neck with two short knotted tails hanging at the front, plus a small brass toggle. Sage fabric, ivory cord, brass toggle. ...
stage1-train-02144
fantasy or game
Build a low-poly dreamcatcher.
Asset: Hanging dreamcatcher Triangle budget: 400 Brief: Flat vertical dreamcatcher facing +Z: a round oak hoop with an ivory sinew web of a few straight criss-cross strands inside, three sage feathers hanging below on short cords with small brass beads at the top of each. Required named parts: hoop, web_strands, cord_1...
stage1-train-02145
prop
Build a low-poly dreidel.
Asset: Wooden dreidel Triangle budget: 250 Brief: Spinning top: a four-sided tapered body widest just below mid-height, narrowing to a sharp iron point at the ground; a short round handle stub rises from the flat top. Oak body, iron tip. Required named parts: body, tip, handle ```javascript function buildAsset(THREE) ...
stage1-train-02146
plant or nature
Build a low-poly dried corn cob.
Asset: Dried corn cob Triangle budget: 400 Brief: Upright dried cob standing on a short stalk stub, slightly tilted; eight-sided faceted kernel body in rust and brass tones with a rounded tip. Three dried husk leaves splay outward and down at the base, ivory with sage tint, all joined to the stalk. Required named parts...
stage1-train-02147
plant or nature
I need a low-poly dried fern.
Asset: Dried fern Triangle budget: 450 Brief: Clump of arching dried fern fronds rising from a short knuckle of stem at the ground, tips curled and drooping outward in all directions, a few fronds broken short. Rust and oak tones with darkWood stems. Required named parts: crown, stem_1, stem_2, stem_3, frond_1, frond_2...
stage1-train-02148
fantasy or game
I need a low-poly bundle of dried herbs.
Asset: Dried herb bundle Triangle budget: 400 Brief: Upright gathered bunch: a fan of slender sage-green stems rising from a wrapped bundle, splayed slightly outward at the top, cinched low by a brass cord with a short hanging tail. Muted sage with oak stem ends and a dusty ivory sprig or two. Required named parts: ste...
stage1-train-02149
vehicle
Build a low-poly drift car.
Asset: Little drift coupe Triangle budget: 700 Brief: Low wide toy coupe facing +Z: wedge body with raked cabin greenhouse, chunky black tyres tucked under flared arches, tall rear wing on two struts, small front splitter. Navy body, ivory lamps, brass struts. Required named parts: body, cabin, wing, wing_strut_left, w...
stage1-train-02150
plant or nature
Build a low-poly driftwood log.
Asset: Bleached driftwood log Triangle budget: 400 Brief: A weathered log lying horizontally along Z, tapering at one end with a split root flare, a couple of broken branch stubs sticking up, bark ridges left as flat facets. Pale oak body with darkWood ends and stub tips. Required named parts: trunk, root_flare, branch...
stage1-train-02151
vehicle
Build a low-poly drilling rig vehicle.
Asset: Tracked drilling rig Triangle budget: 850 Brief: Compact tracked drilling rig: low rectangular hull on two continuous tracks, small cab at the front (+Z), tall lattice derrick mast rising vertically over the rear deck, drill string descending from the mast top toward the ground, two outrigger legs at the sides. ...
stage1-train-02152
container or food
Build a low-poly drink dispenser.
Asset: Drink dispenser with spigot Triangle budget: 500 Brief: Beverage dispenser sitting upright: rounded barrel-shaped jar body, flat lid on top, a brass spigot protruding at the front bottom, a loop handle on one side. Ivory glass body, brass fittings. Required named parts: body, lid, spigot, spigot_handle, handle ...
stage1-train-02153
prop
I need a low-poly drinking fountain.
Asset: Park drinking fountain Triangle budget: 500 Brief: Pedestal drinking fountain: square stepped base, tapered column rising to a shallow round basin with a raised rim, a small brass spout arching over the basin from the back, and a push button on the front of the column. Iron body with brass spout, basin rim in iv...
stage1-train-02154
furniture
Build a low-poly drip coffee maker.
Asset: Drip coffee maker Triangle budget: 500 Brief: Bench-top drip brewer facing +Z: flat rectangular base plate with hotplate, rear tower rising behind holding a reservoir, a wedge filter basket overhanging forward above the carafe, and a rounded carafe with side handle standing on the base. Iron body and base in bla...
stage1-train-02155
bird, sea creature or bug
Build a low-poly drone bee.
Asset: Drone bee Triangle budget: 700 Brief: Chunky male honeybee facing +Z: fat striped abdomen behind, rounded fuzzy thorax, blunt head with two oversized dark eyes and short antennae, four ivory wings swept back over the body, six short dangling legs. Blunt rounded rear, no stinger. Brass and darkWood banding. Requi...
stage1-train-02156
vehicle
Build a low-poly drone carrier.
Asset: Quad-rotor drone carrier Triangle budget: 800 Brief: Flying carrier: boxy navy hull with a flat ivory landing pad on top, four iron rotor arms splayed from the corners each ending in a flat two-blade rotor, two landing skids beneath, and a small rust drone resting on the pad. Front faces +Z, hovering with skids ...
stage1-train-02157
fantasy or game
I need a low-poly drone landing pad.
Asset: Drone landing pad Triangle budget: 500 Brief: Hexagonal landing pad lying flat: thick iron slab with a raised darker rim, an ivory inset ring marking the centre with a small brass hub cap, and three short brass beacon posts around the rim. Sits on the ground plane, top detail facing +Y. Required named parts: pad...
stage1-train-02158
furniture
I need a low-poly drop-in bathtub.
Asset: Drop-in bathtub Triangle budget: 550 Brief: Rectangular drop-in tub with a thick flat rim deck, a hollow rounded basin inside, and a brass faucet with two cross handles mounted at the back rim. Tub length runs along X, faucet at the -Z edge, front face +Z; ivory tub, brass fittings. Required named parts: tub_bod...
stage1-train-02159
vehicle
Build a low-poly dropship.
Asset: Stubby dropship Triangle budget: 1000 Brief: Chunky toy dropship facing +Z: boxy faceted fuselage with a blunt tapered nose, small raised cockpit hood with dark glass, two stubby side wings carrying cylindrical engine pods, a single upright tail fin, and three splayed landing struts holding it just off the groun...
stage1-train-02160
prop
Build a low-poly drum machine.
Asset: Pocket drum machine Triangle budget: 600 Brief: Chunky rectangular drum machine lying flat, slightly tilted toward +Z: navy chassis with an iron faceplate, a 2x2 grid of chunky sage and rust pads on the left, three brass knobs in a row on the right, small black display above the knobs. All parts flush on the top...
stage1-train-02161
tool or gear
I need a low-poly drum seismograph.
Asset: Brass drum seismograph Triangle budget: 800 Brief: Bench seismograph facing +Z: heavy oak slab base, upright iron pillar at the back holding a horizontal pendulum boom whose brass weight hangs near the front, a fine black stylus on the boom tip touching a vertical ivory-papered recording drum, drum on a brass sp...
stage1-train-02162
architecture
I need a low-poly dry dock gate.
Asset: Weathered dry dock gate Triangle budget: 700 Brief: Mitre gate: two tall flat leaves meeting at a shallow V at the centre front (+Z), hinged on stout posts at the left and right, each leaf stiffened by vertical ribs, with a narrow walkway plank running along the top edges. Iron leaves and posts, darkWood walkway...
stage1-train-02163
tool or gear
I need a low-poly dry erase marker.
Asset: Dry erase marker Triangle budget: 250 Brief: A single marker lying at a slight angle? No — standing upright on its flat end, cap up, front faces +Z. Hexagonal barrel in ivory, navy cap with a small brass clip, rust felt tip nib poking below the cap seam. Nothing floating: cap sits on barrel, clip flush to cap. R...
stage1-train-02164
container or food
Build a low-poly sack of dry food.
Asset: Paper sack of dry goods Triangle budget: 400 Brief: Upright flour-style sack: blocky tapered body wider at the base, crumpled shoulder narrowing to a rolled-over open top, a cord tie just under the rim, and a small brass tag on the front face. Ivory paper with oak cord and brass tag. Required named parts: sack_b...
stage1-train-02165
furniture
I need a low-poly drying rack.
Asset: Folding drying rack Triangle budget: 500 Brief: Folding laundry rack: two splayed A-frame side ladders leaning apart in Z, joined at a top hinge rail, each ladder carrying three horizontal cross bars; slim square-section oak rails with darkWood hinge caps. Feet touch ground at y=0, front ladder faces +Z. Require...
stage1-train-02166
vehicle
Build a low-poly dually pickup truck.
Asset: Dually pickup truck Triangle budget: 900 Brief: Workhorse pickup facing +Z: boxy cab with flat ivory-paned windows, short hood in front, long cargo bed behind with raised side walls, four wheels at the rear (two per side, doubled outboard) and two at the front, sitting on a dark chassis rail. Navy body, iron whe...
stage1-train-02167
tool or gear
I need a low-poly duct tape roll.
Asset: Duct tape roll Triangle budget: 350 Brief: Duct tape roll lying flat, axis vertical, front faces +Z: thick ring of tape (12-16 sides) around a hollow cardboard core, plus one short peeled tape end flap sticking out from the rim. Grey iron tape, darkWood core. Required named parts: tape_roll, core, tape_end ```j...
stage1-train-02168
prop
I need a low-poly dumbbell.
Asset: Iron dumbbell Triangle budget: 350 Brief: Horizontal dumbbell lying along the X axis: a straight cylindrical bar with a hexagonal plate at each end, small brass collar rings where the plates meet the bar. Dark iron plates, brass collars. Required named parts: bar, weight_left, weight_right, collar_left, collar_r...
stage1-train-02169
tool or gear
I need a low-poly dumpy level on a tripod.
Asset: Surveyor's dumpy level Triangle budget: 550 Brief: Surveying level: three splayed tripod legs meeting at a small head, a brass leveling base with three thumb knobs, and a horizontal telescope tube sitting on top pointing +Z with an eyepiece at the back and a sunshade hood at the front. Iron legs, brass body, ivo...
stage1-train-02170
vehicle
Build a low-poly dune buggy.
Asset: Rusty dune buggy Triangle budget: 750 Brief: Small open buggy facing +Z: a rounded tub body with cut-down sides, four chunky tyres (front pair smaller, at +Z), an iron roll cage arching over the single navy seat, and a short rear engine block. Rust body, black tyres, iron cage. Required named parts: body_tub, ro...
stage1-train-02171
fantasy or game
Build a low-poly dungeon door.
Asset: Ironbound dungeon door Triangle budget: 650 Brief: Heavy plank door set in a rough stone arch frame, standing upright and closed facing +Z. Vertical dark oak boards crossed by two iron hinge bands and studs, with a brass ring handle at centre-right. Iron bands, brass ring. Required named parts: frame, door_leaf,...
stage1-train-02172
architecture
Build a low-poly dungeon entrance.
Asset: Mossy dungeon entrance Triangle budget: 550 Brief: A squat stone archway rising from the ground: two thick blocky jambs and a stepped lintel above, with a recessed black doorway behind that reads as depth. Two shallow stone steps lead down inside; a little sage moss clings to the arch crown. Required named parts...
stage1-train-02173
plant or nature
I need a low-poly durian hanging from a branch.
Asset: Spiky durian on a branch Triangle budget: 550 Brief: A short horizontal branch section with a thin hanging stem and one large spiky durian fruit below it, its hull studded with pyramidal spikes and a faint seam. Branch and stem darkWood, fruit sage-green with a hint of brass at the stem collar. Required named pa...
stage1-train-02174
fantasy or game
I need a low-poly dusty old book.
Asset: Dusty tome Triangle budget: 300 Brief: Thick closed book lying flat, front cover facing +Z? No — book lying closed with front cover up (+Y), spine along one side, block of ivory pages between covers, a brass clasp on the front edge. Dark leather cover, worn ivory page block. Required named parts: cover_front, co...
stage1-train-02175
architecture
I need a low-poly Dutch barn.
Asset: Open Dutch barn Triangle budget: 850 Brief: Open-sided Dutch barn: broad low-pitched roof on two rows of stout oak posts, no walls, simple cross ties and a ridge beam under the roof, gable ends open. Roof dark wood over oak frame, front faces +Z. Required named parts: roof, post_front_left, post_front_right, pos...
stage1-train-02176
container or food
Build a low-poly dutch oven pot.
Asset: Cast-iron dutch oven Triangle budget: 400 Brief: Squat cast-iron pot with slightly tapered cylindrical body, two loop side handles, and a shallow domed lid topped by a small brass knob; sits flat on the ground. Iron body with brass knob. Required named parts: pot_body, lid, knob, handle_left, handle_right ```ja...
stage1-train-02177
bird, sea creature or bug
Build a low-poly dwarf apistogramma fish.
Asset: Dwarf apistogramma Triangle budget: 500 Brief: Small cichlid hovering level along +Z: deep oval body tapering to a fan tail, a spiky dorsal fin along the top, small pectoral fins at the sides, rounded head with one eye. Rust body with navy back and brass fin edging. Required named parts: body, tail_fin, dorsal_f...
stage1-train-02178
plant or nature
Build a low-poly dwarf banana plant.
Asset: Dwarf banana plant Triangle budget: 500 Brief: Small banana plant: short thick pseudostem rising from ground level, four broad paddle leaves fanning out at different heights and drooping at the tips, plus one pale rolled new leaf standing upright in the centre. Leaves sage, pseudostem a darker green-brown. Requi...
stage1-train-02179
bird, sea creature or bug
Build a low-poly dwarf cassowary.
Asset: Dwarf cassowary Triangle budget: 800 Brief: Heavy ground bird standing upright: bulky rounded body leaning forward, long thick neck, small head with a tall wedge casque and a short downward beak, stubby vestigial wings folded at the sides, bare sturdy legs with three forward toes, short drooping tail feathers. B...
stage1-train-02180
animal
Build a low-poly dwarf chameleon.
Asset: Dwarf chameleon Triangle budget: 650 Brief: Small chameleon standing on four splayed, gripping legs, body arched with a ridged spine, head forward +Z topped by a tall casque fin, two conical turret eyes on the head sides, and a tail curling into a flat spiral behind (-Z). Sage body with a darkWood casque ridge a...
stage1-train-02181
bird, sea creature or bug
I need a low-poly dwarf pencilfish.
Asset: Dwarf pencilfish Triangle budget: 350 Brief: Small slender pencil-shaped fish hovering level with its belly near ground, head facing +Z, tapered snout, tiny forked tail fin at the back, short dorsal fin on top and long low anal fin underneath, two small pectoral fins at the sides. Iron body with ivory belly and ...
stage1-train-02182
bird, sea creature or bug
I need a low-poly dwarf spider.
Asset: Dwarf spider Triangle budget: 750 Brief: Small hunting spider standing on the ground: fat rounded abdomen behind, smaller head-body block in front with a dark eye cluster, eight bent jointed legs splayed out in two rows, front pair raised slightly. Iron-grey body with darkWood leg joints and black eyes. Required...
stage1-train-02183
fantasy or game
Build a low-poly dwarven torc.
Asset: Dwarven torc Triangle budget: 400 Brief: Heavy neck ring: thick half-open brass band curving around the neck, open at the front (+Z), each end finished with a chunky faceted knob. A small iron plate with a rivet sits at the back centre. Chunky, planar, hand-forged. Required named parts: band, terminal_left, term...
stage1-train-02184
fantasy or game
Build a low-poly dwarven warhammer.
Asset: Dwarven warhammer Triangle budget: 500 Brief: Upright warhammer standing on its haft butt: thick darkWood haft vertical, a blocky iron head at the top spanning left-right with square striking faces at both ends, a brass collar band where head meets haft, brass grip rings low on the haft and a small brass butt ca...
stage1-train-02185
prop
Build a low-poly e-reader device.
Asset: Pocket e-reader Triangle budget: 350 Brief: Flat handheld e-reader standing slightly tilted upright, front facing +Z: a rounded rectangular navy body slab with a large recessed ivory screen inset on the front, a thin brass bezel rim, and one small round brass button below the screen. No text on the screen, plain...
stage1-train-02186
bird, sea creature or bug
Build a low-poly earwig critter.
Asset: Little earwig Triangle budget: 350 Brief: Small flat insect in low crawl pose: head at +Z with two swept-back antennae, short thorax, tapering segmented abdomen ending at -Z in a pair of curved pincers, three pairs of stubby legs splayed to the sides. Rust carapace, darkWood rear segments, iron legs, black head....
stage1-train-02187
prop
I need a low-poly pair of earbuds.
Asset: Wireless earbuds pair Triangle budget: 400 Brief: Two earbuds resting upright side by side, each a rounded bud head with a soft tip pointing inward-forward and a short tapered stem dropping below, stem angled slightly outward. Ivory shells with iron tips and a thin brass ring at each stem base. Required named pa...
stage1-train-02188
vehicle
Build a low-poly early-warning aircraft.
Asset: Early-warning plane Triangle budget: 900 Brief: AWACS-style plane facing +Z: long slab-sided fuselage with a blunt nose, straight high wings, twin underslung engine nacelles, conventional tail with fin and horizontal stabilizers, and a wide flat rotodome disc mounted on short pylons above the rear fuselage. Iron...
stage1-train-02189
fantasy or game
Build a low-poly earth elemental.
Asset: Heavy earth elemental Triangle budget: 900 Brief: Hunched boulder-bodied golem standing square, front facing +Z: a massive faceted rock torso, a small low-set head sunk into the shoulders with two pale glowing eyes, two thick arms ending in blocky fists that hang near the ground, and two stubby wide legs. Rust a...
stage1-train-02190
fantasy or game
Build a low-poly earth rune stone.
Asset: Mossy earth rune Triangle budget: 400 Brief: Upright hexagonal stone slab standing on the ground, front face +Z, with a raised angular rune carved in relief (vertical stem plus two chevrons); a sage moss patch clings to one lower corner and a small pebble sits fused at the base. Iron-grey stone, sage moss, brass...
stage1-train-02191
architecture
Build a low-poly earthwork rampart.
Asset: Grass-topped rampart Triangle budget: 700 Brief: A long wedge-shaped earthen bank, steep toward +Z and gently sloping back, topped by a flat walkway with a low sagged palisade of upright timber stakes along the front edge; a few rough stones poke from the slope. Earth sage-brown with oak stakes. Required named p...
stage1-train-02192
prop
I need a low-poly decorated Easter egg.
Asset: Painted Easter egg Triangle budget: 400 Brief: Upright ovoid egg standing on its wider end, slight forward tilt, ivory shell with two wrap-around sage bands and two rust vertical stripes on the front, all bands flush to the shell surface. Required named parts: egg_body, band_upper, band_lower, stripe_left, strip...
stage1-train-02193
animal
Build a low-poly eastern chipmunk.
Asset: Sitting chipmunk Triangle budget: 500 Brief: Chipmunk sitting upright on its haunches, head turned slightly, plump cheeks, short rounded ears, small forepaws tucked at chest, big hind feet flat on the ground, bushy tail curling up behind the back. Rust fur with ivory belly and two ivory-edged dark back stripes r...
stage1-train-02194
bird, sea creature or bug
I need a low-poly mosquitofish.
Asset: Eastern mosquitofish Triangle budget: 350 Brief: Small fish facing +Z, body horizontal a little above the ground: slim spindle body, flattened head with upturned mouth, fan tail at -Z, small dorsal fin set far back, low anal fin, two small pectoral fins. Silvery iron body with ivory belly and black eyes. Require...
stage1-train-02195
animal
I need a low-poly eastern newt.
Asset: Eastern newt Triangle budget: 500 Brief: Red eft phase: slender lizard-like newt standing low on four short splayed legs, small rounded head facing +Z, long tapering tail behind (-Z) curving slightly, dry-looking flat-topped back. Body rust with two rows of darker spots, black eyes. Required named parts: body, h...
stage1-train-02196
animal
Build a low-poly eastern woodchuck.
Asset: Chubby woodchuck Triangle budget: 550 Brief: Groundhog standing on all fours, stout low body with rounded back, blunt snout forward +Z, small round ears, short splayed legs with visible paws, short bushy tail trailing back. Oak-brown fur, darkWood feet and nose. Required named parts: body, head, snout, ear_left,...
stage1-train-02197
plant or nature
Build a low-poly ebony tree.
Asset: Gnarled ebony tree Triangle budget: 550 Brief: Stout dark tree: thick crooked trunk splitting into two short branches, topped by three clustered angular foliage masses. Near-black wood and deep blue-green foliage. Front faces +Z. Required named parts: trunk, branch_left, branch_right, foliage_main, foliage_left,...
stage1-train-02198
plant or nature
I need a low-poly edamame pod.
Asset: Split edamame pod Triangle budget: 300 Brief: Single pod lying horizontally along X with a short stem stub at one end, the upper shell split open along its length to show three plump beans in a row; pod slightly curved and tapering at both tips. Sage-green shell, pale ivory-green beans, flat shading. Required na...
stage1-train-02199
tool or gear
I need a low-poly garden edging knife.
Asset: Half-moon edging knife Triangle budget: 300 Brief: Half-moon edging knife standing upright: a broad crescent blade with its curved cutting edge resting on the ground, a short brass ferrule socket, and a turned oak handle rising above it. Blade flat facing +Z, planted straight up at y=0. Required named parts: bla...