id stringlengths 18 18 | category stringclasses 10
values | prompt stringlengths 21 68 | response stringlengths 1.18k 11.4k |
|---|---|---|---|
stage1-train-05300 | prop | Build a low-poly stop sign on a post. | Asset: Roadside stop sign
Triangle budget: 250
Brief: Upright octagonal sign facing +Z, mounted near the top of a slender iron post that stands on a small flat foot flange; a narrow ivory border rings the flat red octagon face.
Required named parts: post, sign_face, sign_border, foot_flange
```javascript
function buil... |
stage1-train-05301 | architecture | Build a low-poly storage bunker. | Asset: Sunken storage bunker
Triangle budget: 800
Brief: Low, wide bunker: squat boxy shell with slightly bevelled edges, a flat overhanging roof slab, a recessed iron door on the front (+Z) with a small brass handle, and one louvred vent block on the roof. Cool iron shell with darker door.
Required named parts: shell,... |
stage1-train-05302 | furniture | I need a low-poly storage ottoman. | Asset: Sage storage ottoman
Triangle budget: 400
Brief: Square upholstered storage ottoman, sage fabric: boxy padded body with slightly overhanging flat lid on top, four short oak bun feet at the corners, small brass clasp centred on the front face. Front faces +Z, feet grounded at y=0.
Required named parts: body, lid,... |
stage1-train-05303 | furniture | I need a low-poly storage trunk. | Asset: Weathered storage trunk
Triangle budget: 450
Brief: Rectangular chest sitting on the ground, slightly domed lid hinged at the back, two iron bands wrapping body and lid, a brass clasp at the front centre. Dark wood with iron trim. Front faces +Z.
Required named parts: body, lid, band_1, band_2, clasp
```javascr... |
stage1-train-05304 | bird, sea creature or bug | Build a low-poly storm petrel. | Asset: Storm petrel
Triangle budget: 500
Brief: Small seabird standing: plump dark body tilted slightly forward, small rounded head with stubby hooked bill, long narrow wings folded flat along the sides, notched rectangular tail, white rump patch, two short legs with webbed feet. Body and wings black-navy, rump ivory, ... |
stage1-train-05305 | vehicle | Build a low-poly straddle carrier. | Asset: Port straddle carrier
Triangle budget: 950
Brief: Port container straddler: two tall vertical side frames joined by a top cross beam, four splayed wheel bogies at the base, and a container hanging suspended between the legs on short hoist cables. Iron frame, rust container, black wheels, brass accents. Faces +Z ... |
stage1-train-05306 | animal | Build a low-poly straight-shelled squid. | Asset: Straight-shelled squid
Triangle budget: 700
Brief: Belemnite-like squid resting horizontally just above ground: long tapering ivory shell sweeping back along -Z, bulbous navy mantle where it meets the shell, rounded head with two eye bumps facing +Z, a crown of three short rust tentacles pointing forward, and a ... |
stage1-train-05307 | tool or gear | Build a low-poly strap wrench. | Asset: Strap wrench
Triangle budget: 350
Brief: Hand tool lying flat-ish: straight iron handle with a rounded grip end, a squared C-frame head at the front holding a thin flat strap loop across the opening, and a small brass tightening knob on the frame. Front faces +Z, resting on the ground plane.
Required named parts... |
stage1-train-05308 | plant or nature | I need a low-poly straw bale. | Asset: Twine-bound straw bale
Triangle budget: 250
Brief: Rectangular hay bale lying on the ground, slightly rounded corners, cut straw ends faceted, two dark twine bands wrapped around the width. Brass-gold straw with oak-dark twine.
Required named parts: bale, twine_band_1, twine_band_2
```javascript
function buildA... |
stage1-train-05309 | container or food | I need a low-poly straw dispenser. | Asset: Diner straw dispenser
Triangle budget: 500
Brief: Diner-style straw dispenser standing upright: round iron base ring, tall cylindrical body with a few visible straws inside, domed iron lid with a small brass knob on top. Clear body reads as light sage glass; straws striped ivory and rust.
Required named parts: b... |
stage1-train-05310 | plant or nature | Build a low-poly strawberry planter pot. | Asset: Strawberry planter pot
Triangle budget: 500
Brief: Tapered terracotta pot with a raised rim, dark soil disc just below the rim, a low cluster of sage leaves spilling over the edge, and two small red strawberries hanging on short stems. Pot centred, plant crown facing +Z.
Required named parts: pot, rim, soil, lea... |
stage1-train-05311 | vehicle | Build a low-poly street luge. | Asset: Street luge board
Triangle budget: 700
Brief: Rider lies feet-first, so foot pegs at +Z and a small raised headrest at -Z. Long low oak deck close to the ground, iron trucks at both ends with four small flat-cylinder wheels, a padded ivory headrest and two brass foot pegs.
Required named parts: deck, foot_peg_le... |
stage1-train-05312 | prop | I need a low-poly street mailbox. | Asset: Street mailbox
Triangle budget: 450
Brief: Navy blue post-box: rounded-top rectangular body standing on a short dark post, front face +Z with an inset door, a horizontal mail slot above it, and a small brass handle. Slight overhanging hood at the top.
Required named parts: post, body, hood, door, mail_slot, hand... |
stage1-train-05313 | vehicle | I need a low-poly street sweeper vehicle. | Asset: Compact street sweeper
Triangle budget: 800
Brief: Small municipal sweeper facing +Z: boxy navy chassis with a glass-fronted cab at the front, two flat spinning disc brushes slung low ahead of the front wheels, a ribbed sage hopper box over the rear axle, iron bumpers and black wheels with brass hubs.
Required n... |
stage1-train-05314 | vehicle | I need a low-poly street sweeper truck. | Asset: Municipal street sweeper
Triangle budget: 900
Brief: Boxy sweeper truck facing +Z: cab at the front with a slanted ivory windshield, tall hopper body behind, two round gutter brushes spinning low at the front sides on short arms, four wheels plus a small amber beacon on the cab roof. Iron body, navy hopper, dark... |
stage1-train-05315 | fantasy or game | I need a low-poly fantasy strength gauntlet. | Asset: Heavy iron gauntlet
Triangle budget: 700
Brief: Blocky armored gauntlet standing upright: flared iron cuff at the base on the ground, chunky faceted forearm shell rising above it with a brass trim ring, a broad knuckle plate at the front, four stubby segmented fingers curled toward +Z and a thick thumb on the le... |
stage1-train-05316 | animal | Build a low-poly chipmunk with back stripes. | Asset: Striped chipmunk
Triangle budget: 700
Brief: Chipmunk perched upright on its hind feet, cheek pouch cheeks, small rounded ears, a bushy tail curving up behind. Oak fur with two darkWood stripes running down its back and ivory stripe edges; tail same oak with darkWood tip; face +Z.
Required named parts: body, hea... |
stage1-train-05317 | animal | Build a low-poly striped grass mouse. | Asset: Striped grass mouse
Triangle budget: 400
Brief: Small crouched mouse facing +Z: low rounded body on four short legs, pointed snout, round ears, long thin tail curving back, dark dorsal stripe running down the spine. Sandy brown body, darkWood stripe, ivory belly, black feet.
Required named parts: body, stripe, h... |
stage1-train-05318 | bird, sea creature or bug | Build a low-poly striped killifish. | Asset: Striped killifish
Triangle budget: 400
Brief: Small slender fish swimming +Z, slightly arched body, fan tail, small dorsal and anal fins, paired pectoral fins, ivory with dark navy vertical stripes and a rounded eye. Flat-shaded, no base.
Required named parts: body, tail_fin, dorsal_fin, anal_fin, pectoral_fin_l... |
stage1-train-05319 | bird, sea creature or bug | Build a low-poly striped mullet. | Asset: Striped mullet
Triangle budget: 450
Brief: Elongated torpedo fish with head forward at +Z, gently curved back, forked tail at -Z. Grey-blue body with two navy horizontal stripes along the flank, ivory belly, spiny first dorsal fin plus soft second dorsal, paired pectoral fins, small black eye.
Required named par... |
stage1-train-05320 | bird, sea creature or bug | Build a low-poly scallop shell with stripes. | Asset: Striped scallop shell
Triangle budget: 400
Brief: Fan-shaped scallop shell lying flat, ribbed surface with radiating ridges, alternating rust and ivory stripes, small hinge ear tabs at the back (-Z) and a rounded umbo nub. Slight upward curl at the outer rim, resting on the ground.
Required named parts: shell, u... |
stage1-train-05321 | animal | I need a low-poly striped skunk. | Asset: Striped skunk
Triangle budget: 550
Brief: Skunk standing on four short legs, low slab-sided body, small pointed head with a downward snout, big bushy tail arced up high behind it. Matte black body with an ivory stripe running from the nape down the spine and along the tail, ivory tail tip. Faces +Z.
Required nam... |
stage1-train-05322 | container or food | I need a low-poly stubby beer bottle. | Asset: Stubby beer bottle
Triangle budget: 350
Brief: Standing stubby bottle: short wide cylindrical body with a rounded shoulder, brief neck, crimped crown cap on top, and a plain ivory label band around the middle. Sage-green glass, brass cap.
Required named parts: body, shoulder, neck, cap, label_band
```javascript... |
stage1-train-05323 | tool or gear | Build a low-poly studded bracer. | Asset: Studded leather bracer
Triangle budget: 450
Brief: Forearm cuff: a tapered open-ended tube standing upright (axis Y) with a visible thickness rim, six brass pyramid studs in two rings of three around the outer face, plus a broad strap and buckle wrapped across the front (+Z). Dark leather with brass hardware.
Re... |
stage1-train-05324 | tool or gear | I need a low-poly studded club. | Asset: Studded club
Triangle budget: 550
Brief: Wooden club held upright: tapered dark-wood shaft widening to a bulbous head at the top, short wrapped grip at the base, iron studs poking from the head in staggered rows. Axis along Y.
Required named parts: grip, shaft, head, studs_1, studs_2, studs_3, pommel
```javascr... |
stage1-train-05325 | prop | I need a low-poly studio microphone. | Asset: Studio condenser microphone
Triangle budget: 450
Brief: Desk condenser mic: round weighted base, short upright post with a brass collar, a U-shaped yoke holding the mic body tilted slightly forward (+Z), cylindrical iron body with an ivory grille band up top and a small brass ring between body and grille. No tex... |
stage1-train-05326 | vehicle | Build a low-poly stunt biplane. | Asset: Stunt biplane
Triangle budget: 900
Brief: Small stunt biplane parked nose-forward (+Z): stubby navy fuselage with ivory upper and lower wings joined by two iron struts, brass two-blade propeller at the nose, riveted cowling, open cockpit behind the wings, tail fin and horizontal stabilizer at the rear, two small... |
stage1-train-05327 | architecture | Build a low-poly substation building. | Asset: Brick substation hut
Triangle budget: 500
Brief: Small square brick substation hut, flat roof slab with a slight overhang, an iron door on the front (+Z) with a narrow louver vent beside it, three ceramic bushings on the roof joined by a short cable. Walls rust-brown brick, roof and door iron, bushings ivory.
Re... |
stage1-train-05328 | vehicle | I need a low-poly subway car. | Asset: Two-car subway train
Triangle budget: 900
Brief: One subway car, length along Z with the cab front facing +Z: a long rectangular iron body with a slightly inset flatter roof, a navy window band running down each side, a dark windshield on the front face, two navy sliding doors per side, and two black bogies with... |
stage1-train-05329 | architecture | Build a low-poly subway entrance pavilion. | Asset: Subway entrance pavilion
Triangle budget: 1000
Brief: Small street kiosk over a descending stair: a rectangular stairwell open toward +Z with a few ivory steps sinking below grade, low iron parapet walls on the three closed sides with a brass handrail, four sage posts carrying a flat overhanging roof slab, and a... |
stage1-train-05330 | prop | I need a low-poly subwoofer speaker box. | Asset: Wooden subwoofer box
Triangle budget: 500
Brief: Squat rectangular subwoofer cabinet standing on four small feet, front face +Z showing one large recessed circular driver ringed by a dark cone, a small circular port hole below it, and a brass badge. Dark wood carcass, iron driver, brass trim.
Required named part... |
stage1-train-05331 | bird, sea creature or bug | I need a low-poly suet cake feeder. | Asset: Hanging suet cake feeder
Triangle budget: 400
Brief: Small square cage feeder hanging from a brass wire loop: pitched roof over four open sides of vertical iron bars, a flat tray floor, and an ivory suet cake block sitting inside the cage. Suspended vertically, symmetric about Y, front +Z.
Required named parts: ... |
stage1-train-05332 | container or food | I need a low-poly sugar bowl. | Asset: Sugar bowl
Triangle budget: 400
Brief: Round squat bowl with a slightly flared rim, domed lid seated on top, small knob finial, and two looped side handles. Ivory ceramic with a brass knob.
Required named parts: bowl, lid, knob, handle_left, handle_right
```javascript
function buildAsset(THREE) {
const group ... |
stage1-train-05333 | container or food | I need a low-poly sugar bowl with a lid. | Asset: Sugar bowl with lid
Triangle budget: 350
Brief: Round squat bowl with a slightly flared rim, a domed lid seated on top, and a small brass knob at the lid's centre; two tiny loop handles on opposite sides. Ivory body and lid, brass knob and rim band.
Required named parts: bowl_body, rim, lid, knob, handle_left, h... |
stage1-train-05334 | plant or nature | Build a low-poly sugar maple tree. | Asset: Sugar maple
Triangle budget: 650
Brief: Standing tree: tapered trunk with two short splayed branches, topped by a rounded cluster of overlapping planar foliage clumps stacked in a rough dome. Dark wood trunk, rust foliage with one brass-tinged clump.
Required named parts: trunk, branch_left, branch_right, canopy... |
stage1-train-05335 | container or food | I need a low-poly sugar tin. | Asset: Kitchen sugar tin
Triangle budget: 350
Brief: Round canister standing upright: cylindrical body (10-12 sides) with a snug overhanging lid and a small brass knob on top, a wrap-around label band inset on the body in ivory, thin brass rim at the lid edge. Iron body, brass accents.
Required named parts: body, label... |
stage1-train-05336 | vehicle | Build a low-poly sugarcane harvester. | Asset: Sugarcane harvester
Triangle budget: 1000
Brief: Big rust-red harvester facing +Z: boxy chassis on tall front wheels and small rear steering wheels, glass cab set back on top, wide crop header with two pointed dividers at the front, a rounded extractor fan housing on the left flank, and a long discharge elevator... |
stage1-train-05337 | plant or nature | Build a low-poly sugarcane stalk. | Asset: Tall sugarcane stalk
Triangle budget: 400
Brief: Single upright cane standing on the ground: three stacked tapering segments with slim node rings at the joints, long pointed blade leaves fanning out and arching down from the upper nodes, thin tip at the top. Stalk and leaves in sage green with slightly darker no... |
stage1-train-05338 | furniture | Build a low-poly suit stand. | Asset: Valet suit stand
Triangle budget: 400
Brief: Gentleman's valet stand: round iron base, slender oak post rising to a shoulder-shaped hanger bar at the top with a brass coat hook, and a small flat oak tray shelf partway down on the front (+Z). Everything centred on the post.
Required named parts: base, post, shoul... |
stage1-train-05339 | plant or nature | Build a low-poly sulfur crust mound. | Asset: Sulfur crust mound
Triangle budget: 400
Brief: A lumpy volcanic sulfur mound sitting on the ground: broad rounded main dome with a small secondary bump beside it, several flat angular crust plates breaking up the surface, and a dark vent crater at the summit. Brass-yellow with ivory pale crust and rust staining.... |
stage1-train-05340 | plant or nature | Build a low-poly sulfur crystal cluster. | Asset: Sulfur crystal cluster
Triangle budget: 400
Brief: A cluster of sharp faceted crystals rising from a small dark rock footing: one tall main shard leaning slightly, three shorter shards fanned around it, all sharing the base. Bright sulfur yellow with paler ivory tips, darkWood-black rock at ground level.
Require... |
stage1-train-05341 | bird, sea creature or bug | Build a low-poly cockatoo standing on the ground. | Asset: Sulphur-crested cockatoo
Triangle budget: 700
Brief: Upright parrot on two feet, body tilted slightly forward and tail slanting down behind (-Z), rounded head with a swept-back yellow crest of a few flat feather blades, hooked black beak. Ivory-white plumage, brass crest, dark feet.
Required named parts: body, h... |
stage1-train-05342 | bird, sea creature or bug | Build a low-poly summer flounder lying flat. | Asset: Speckled summer flounder
Triangle budget: 400
Brief: Flatfish resting flat on the seabed with both eyes on the up-facing side: a wide flattened oval body slightly tilted up at the head, fringed by a thin dorsal fin along one edge and an anal fin along the other, a small fan tail fin at the back, two bulging eyes... |
stage1-train-05343 | fantasy or game | Build a low-poly summoning horn prop. | Asset: Summoning horn
Triangle budget: 600
Brief: Curved animal horn standing roughly vertical, wide flared bell at the top opening upward and tapering down to a small mouthpiece tip at the bottom; a brass rim rings the bell, a brass ferrule band sits near the mouthpiece, and a dark leather strap loops from the band. B... |
stage1-train-05344 | furniture | Build a low-poly sun lounger. | Asset: Sun lounger
Triangle budget: 500
Brief: Garden lounger: long flat bed of ivory canvas slats on an oak frame, backrest raised at the +Z head end, four short splayed legs, a small armrest rail each side. Faces +Z.
Required named parts: frame, bed_slats, backrest, leg_front_left, leg_front_right, leg_back_left, leg... |
stage1-train-05345 | bird, sea creature or bug | Build a low-poly sea star. | Asset: Sunburst sea star
Triangle budget: 400
Brief: Five-armed sea star lying flat, slightly domed: a low central disc with five thick arms radiating evenly (one arm pointing +Z), each arm tapering to a blunt rounded tip and gently arched upward; a row of small raised bumps down each arm's centre. Rust body with brass... |
stage1-train-05346 | container or food | I need a low-poly sundae cup. | Asset: Cherry sundae cup
Triangle budget: 450
Brief: Upright sundae glass facing +Z: a flared ivory cup sitting on y=0, filled with a rounded ivory ice-cream mound, rust sauce drizzled over the top, and a small rust cherry with a darkWood stem. All parts stack and touch; no spoon, no base.
Required named parts: cup, ic... |
stage1-train-05347 | fantasy or game | Build a low-poly sunstone for a fantasy game. | Asset: Sunstone shard cluster
Triangle budget: 400
Brief: A glowing crystal cluster rooted at ground level: one tall pointed hexagonal spire leaning slightly back, two smaller shards fused to its lower body and splaying left and right, all meeting at a shared base; a thin brass binding band rings the main spire a third... |
stage1-train-05348 | fantasy or game | I need a low-poly sunstone amulet. | Asset: Sunstone amulet
Triangle budget: 400
Brief: Pendant hanging upright, face +Z: a faceted octahedral sunstone gem in warm amber-rust set inside a brass bezel ring, with four short brass prongs gripping the stone, a small brass bail ring at the top, and a simple cord loop threaded through the bail.
Required named p... |
stage1-train-05349 | architecture | Build a low-poly supermarket building. | Asset: Corner supermarket
Triangle budget: 400
Brief: Single-storey flat-roofed supermarket, wide frontage facing +Z: main box volume with a shallow roof slab overhanging slightly, a glazed shopfront band across the front with a flush entrance doorway in the middle, and a plain signboard band above the glazing. Ivory w... |
stage1-train-05350 | vehicle | I need a low-poly surveillance drone. | Asset: Quad surveillance drone
Triangle budget: 700
Brief: Hovering quadcopter: flat central body with slight top canopy, four arms radiating to rotor hubs with flat disc blades, a small gimbal camera ball slung underneath facing +Z. Iron and navy body with black rotors.
Required named parts: body, canopy, arm_1, arm_2... |
stage1-train-05351 | fantasy or game | Build a low-poly survey drone. | Asset: Survey drone
Triangle budget: 700
Brief: Small scout drone hovering with four splayed arms, each ending in a flat disc rotor; rounded central hull with a brass-rimmed sensor eye on the front (+Z), a thin antenna rising from the top, and two short iron landing skids tucked beneath. Iron hull with oak and brass de... |
stage1-train-05352 | vehicle | Build a low-poly survey ship. | Asset: Coastal survey ship
Triangle budget: 900
Brief: Small survey vessel floating level with deck at mid-height, facing +Z, bow pointed. Navy hull with darkWood waterline strip, ivory boxy cabin set aft of midships, tall mast on the cabin roof carrying a tilted radar dish, brass small crane boom over the stern, short... |
stage1-train-05353 | tool or gear | I need a low-poly surveying theodolite. | Asset: Surveying theodolite
Triangle budget: 550
Brief: Theodolite on a tripod: three splayed legs meeting a small triangular head, a brass levelling base with tangent knobs, and a U-shaped iron yoke holding a short rectangular telescope tube pointing forward (+Z) level. Oak legs, brass and iron body.
Required named pa... |
stage1-train-05354 | tool or gear | I need a low-poly surveyor's chain. | Asset: Surveyor's chain
Triangle budget: 500
Brief: Gunter-style chain lying flat on the ground along the Z axis: a run of alternating-perpendicular flat oval links between two tall brass handles, each handle a ring on a short upright grip with a small brass tally tag. Iron links, brass ends.
Required named parts: hand... |
stage1-train-05355 | tool or gear | Build a low-poly surveyor's level on a tripod. | Asset: Brass surveyor's level
Triangle budget: 650
Brief: Surveyor's dumpy level: three splayed wooden tripod legs meeting at a small iron head, a horizontal iron telescope tube above it pointing +Z with a brass eyepiece at the back (-Z) and a brass objective ring at the front, plus a small brass focusing knob and two ... |
stage1-train-05356 | container or food | I need a low-poly sushi delivery bag. | Asset: Sushi delivery bag
Triangle budget: 550
Brief: Insulated takeout bag standing upright: boxy navy body with a slightly flared rim, ivory top flap folded back at the front showing the open mouth, two rust rope handle loops rising from the sides. Inside sits an ivory tray box with two nibs of nigiri (ivory rice bas... |
stage1-train-05357 | bird, sea creature or bug | Build a low-poly swallow sitting in a mud nest cup. | Asset: Swallow in its nest cup
Triangle budget: 550
Brief: Barn swallow nestled in a half-cup mud nest: open bowl tapering down, bird sitting low with body upright and head turned to +Z. Folded pointed wings and a long forked tail sticking out the back (-Z); tiny beak. Navy back and wings, ivory underside, rust throat,... |
stage1-train-05358 | bird, sea creature or bug | I need a low-poly swallowtail butterfly. | Asset: Swallowtail butterfly
Triangle budget: 500
Brief: Perched butterfly, body horizontal facing +Z, wings spread wide in a shallow V; forewings large and angular, hindwings smaller with a single pointed tail each, thin antennae curving forward. Navy wings with ivory and brass spots, dark body, rust accents on hindwi... |
stage1-train-05359 | animal | I need a low-poly swamp antelope. | Asset: Swamp sitatunga
Triangle budget: 800
Brief: Sitatunga standing with splayed hooves, long shaggy coat: deep-chested body sloping up to the rump, long neck angled forward, narrow head with two spiralled horns and small ears, four slender legs with wide splayed dark hooves, short tufted tail. Rust coat, ivory throa... |
stage1-train-05360 | bird, sea creature or bug | I need a low-poly swan feather. | Asset: Swan feather
Triangle budget: 250
Brief: A single white feather lying flat, tilted slightly: slender tapering shaft running front to back, broad ivory vane split into two curved planar halves either side, notched tip at the back and a short bare quill stub at the front (+Z). Flat planar shapes, minimal thickness... |
stage1-train-05361 | bird, sea creature or bug | Build a low-poly swan figure. | Asset: Garden swan figure
Triangle budget: 550
Brief: Carved swan figure in a calm floating pose: plump oval body with a raised swept-back tail, an S-curved neck rising to a small head, short beak, and two folded wings resting against the flanks. Ivory white with a rust beak.
Required named parts: body, neck, head, bea... |
stage1-train-05362 | bird, sea creature or bug | Build a low-poly swan sitting on its nest. | Asset: Nesting swan
Triangle budget: 800
Brief: Swan settled low in a shallow twig nest, breast facing +Z, long neck rising in an S-curve to a small head with a rust beak, folded wings tucked over the back. Ivory swan, oak and darkWood twigs.
Required named parts: nest, swan_body, neck, head, beak, wing_left, wing_righ... |
stage1-train-05363 | plant or nature | Build a low-poly sweet potato. | Asset: Sweet potato
Triangle budget: 300
Brief: Single sweet potato lying on its side, elongated tapered tuber with a gentle bend, blunt rounded ends, a couple of small nubby rootlets on one flank. Rust-brown skin, slightly paler at the tips.
Required named parts: tuber, tip_front, tip_back, rootlet_1, rootlet_2
```ja... |
stage1-train-05364 | container or food | I need a low-poly carton of sweet potato fries. | Asset: Carton of sweet potato fries
Triangle budget: 400
Brief: Tapered paper carton (narrow at the base, wider at the rim) standing upright, filled with a loose fan of stubby rectangular fries poking out at varied angles, a couple leaning over the rim. Orange fries, ivory carton.
Required named parts: carton, fry_1, f... |
stage1-train-05365 | vehicle | Build a low-poly swept-wing fighter jet. | Asset: Swept-wing fighter
Triangle budget: 700
Brief: Single-seat jet facing +Z: tapered fuselage with pointed nose, bubble canopy set just behind the nose, two wings swept back ~40° from mid-fuselage, twin canted tail fins at the rear, and a round exhaust nozzle at the back. Navy body with iron wing edges and a dark g... |
stage1-train-05366 | prop | I need a low-poly swim fin. | Asset: Swim fin
Triangle budget: 350
Brief: Single dive fin lying flat on the ground, blade extending toward +Z, foot pocket at the back with an open heel and a strap over it, low side rails running along the blade edges, slightly upswept tip. Navy blade, iron foot pocket, sage rails and strap.
Required named parts: fo... |
stage1-train-05367 | prop | I need a low-poly pair of swim goggles. | Asset: Swim goggles
Triangle budget: 350
Brief: Swim goggles lying face-up: two rounded lens frames side by side facing +Z, each holding a flat sage-tinted lens, joined by a short nose bridge, with a navy strap looping back from the outer frame edges. Frames in iron with brass buckle.
Required named parts: lens_frame_l... |
stage1-train-05368 | animal | Build a low-poly swimming goose. | Asset: Swimming goose
Triangle budget: 500
Brief: Goose floating: broad ivory body low and level with a raised tail tip at the back, an S-curved neck rising forward from the shoulders, small head level facing +Z, short orange bill, two folded wings as flat slabs along the flanks. No visible legs.
Required named parts: ... |
stage1-train-05369 | architecture | Build a low-poly swimming platform. | Asset: Floating swim platform
Triangle budget: 550
Brief: Square floating dock resting at ground level: planked oak deck, darkWood edge frame, four iron barrel floats tucked under the corners, a short iron ladder at the front (+Z) edge and a small brass cleat at the back corner. Front faces +Z.
Required named parts: de... |
stage1-train-05370 | furniture | Build a low-poly swing-arm wall sconce. | Asset: Iron swing-arm sconce
Triangle budget: 400
Brief: Wall sconce facing +Z with a flat back plate against the wall, a short horizontal pivot stub, a hinged arm swinging out to one side, and a small four-sided lantern with ivory panes hanging from the arm tip. Iron body with brass joints and fittings.
Required named... |
stage1-train-05371 | container or food | I need a low-poly swing-top water bottle. | Asset: Swing-top water bottle
Triangle budget: 400
Brief: Sage stoneware bottle standing upright: rounded belly tapering to a short neck with a lipped rim, ivory stopper cap seated on top, iron wire bail looping over the cap and down both sides of the neck to pivots. Front faces +Z.
Required named parts: body, neck, ca... |
stage1-train-05372 | fantasy or game | Build a low-poly swinging blade trap. | Asset: Pendulum blade trap
Triangle budget: 500
Brief: Gallows-style trap: a low oak cross base on the ground, one upright iron post, a short horizontal arm reaching forward (+Z), a chain link hanging from its end, and a broad crescent axe blade hanging at rest with a slight forward tilt. Dark iron blade with a rusted ... |
stage1-train-05373 | fantasy or game | Build a low-poly swinging spiked ball trap. | Asset: Hanging spiked ball
Triangle budget: 550
Brief: A flail hazard hanging from a fixed anchor: small iron ring mount at the top, a short chain of three links dropping straight down, ending in a black iron ball studded with pyramidal spikes pointed outward in all directions. Brass ring accent.
Required named parts: ... |
stage1-train-05374 | container or food | I need a low-poly Swiss roll. | Asset: Swiss roll slice
Triangle budget: 400
Brief: A short horizontal cake log with a flat front face (+Z) showing a cream spiral; dark cocoa sponge outside, ivory cream spiral, thin rust jam line spiralling with it. Back end flat and closed.
Required named parts: roll_body, cream_spiral, jam_spiral, end_face_back
``... |
stage1-train-05375 | architecture | Build a low-poly Swiss stone chalet. | Asset: Swiss stone chalet
Triangle budget: 900
Brief: Compact alpine chalet: squared stone lower storey with a timber-framed upper storey and a wide shallow-pitched gabled roof with deep overhanging eaves; front (+Z) has a central door with two shuttered windows, a small balcony under the roof ridge, and a stone chimne... |
stage1-train-05376 | prop | I need a low-poly swivel gun. | Asset: Ship's swivel gun
Triangle budget: 550
Brief: Small naval swivel cannon on a wooden post: an iron barrel with flared muzzle and a ball knob at the breech, held by a U-shaped iron yoke that wraps it at mid-length, mounted on a short oak post with a brass collar. Barrel points +Z.
Required named parts: post, colla... |
stage1-train-05377 | bird, sea creature or bug | Build a low-poly sword-billed hummingbird. | Asset: Sword-billed hummingbird
Triangle budget: 500
Brief: Perched upright and facing +Z: plump compact body, small rounded head, wings folded flat against the sides, short fanned tail angled down and back, and the signature bill — a straight slender spike noticeably longer than the whole body, tilted up-forward. Sage... |
stage1-train-05378 | plant or nature | Build a low-poly sword fern. | Asset: Sword fern
Triangle budget: 500
Brief: Clump fern: a short central crown with 7-9 long narrow fronds arching outward and up, each frond a flat tapered blade split into simple zigzag pinnae segments. Sage green fronds with darkWood crown stub.
Required named parts: crown, frond_1, frond_2, frond_3, frond_4, frond... |
stage1-train-05379 | plant or nature | Build a low-poly sycamore tree. | Asset: Broad sycamore tree
Triangle budget: 700
Brief: Tall sycamore: straight tapering trunk from ground to about a third of its height, three short branch limbs splaying up into a broad, slightly irregular rounded canopy built from a few overlapping faceted lobes. Oak trunk with sage foliage.
Required named parts: tr... |
stage1-train-05380 | container or food | I need a low-poly syrup jug. | Asset: Syrup jug
Triangle budget: 400
Brief: Small stoneware jug: tapered body widest at the base, short neck with a brass rim, a small pouring spout at the front lip, one loop handle on the back (-Z). Ivory body, brass neck band.
Required named parts: body, neck, spout, handle, rim
```javascript
function buildAsset(T... |
stage1-train-05381 | tool or gear | I need a low-poly T-square. | Asset: Drafting T-square
Triangle budget: 250
Brief: Drafting T-square lying flat on the ground: a long thin oak blade running along Z, with a short perpendicular darkWood head bar across its back end, plus two small brass screws where the head meets the blade.
Required named parts: blade, head, screw_1, screw_2
```ja... |
stage1-train-05382 | prop | Build a low-poly tablet. | Asset: Tablet computer
Triangle budget: 250
Brief: Flat slate tablet standing upright on its long edge, slightly tilted back: rounded rectangular iron body, inset ivory screen on the front (+Z), thin black bezel, small brass home button below the screen and a tiny camera dot above it.
Required named parts: body, screen... |
stage1-train-05383 | prop | I need a small tabletop Christmas tree. | Asset: Tabletop Christmas tree
Triangle budget: 400
Brief: Small potted fir: a squat tapered pot at the ground, a short trunk rising from it, three stacked conical tiers of foliage tapering upward, and a small brass star finial at the tip. Sage-green foliage, darkWood trunk, rust pot, brass star. Upright, front facing ... |
stage1-train-05384 | tool or gear | Build a low-poly tabletop easel. | Asset: Tabletop easel
Triangle budget: 400
Brief: Small desk easel standing on the table: a central upright mast with two front legs splayed in an A-frame and one rear leg angled back (-Z) for support, a horizontal ledge tray across the mast to hold the work, and a small brass top clamp on the mast head. Oak frame with... |
stage1-train-05385 | tool or gear | I need a low-poly microscope. | Asset: Brass tabletop microscope
Triangle budget: 550
Brief: Bench microscope facing +Z: flat iron horseshoe base, a curved arm rising at the back, a square stage jutting forward on the arm, and an angled body tube above it with a brass eyepiece at the top and a short objective lens pointing down at the stage. Brass tu... |
stage1-train-05386 | tool or gear | I need a low-poly tack hammer. | Asset: Brass-ferruled tack hammer
Triangle budget: 300
Brief: Small tack hammer standing upright with the handle on Y and the iron head across the top along X. Oak handle with a brass ferrule, iron head with a flat striking face on one side and a short split claw on the other; head and handle physically joined.
Require... |
stage1-train-05387 | architecture | Build a low-poly tack room shed. | Asset: Small tack room
Triangle budget: 900
Brief: Compact timber tack-room shed facing +Z: rectangular oak plank walls, shallow pitched darkWood roof with eave overhang, centred plank door with brass latch, a small ivory-paned window to one side, and a low iron doorstep. Ground at y=0.
Required named parts: wall_body,... |
stage1-train-05388 | prop | I need a low-poly tackle box. | Asset: Fisherman's tackle box
Triangle budget: 350
Brief: Closed rectangular tackle box: iron lower body, slightly overhanging hinged lid on top, arched brass carry handle rising from the lid centre, small brass latch on the front face. Sits flat on the ground, front faces +Z.
Required named parts: body, lid, handle, l... |
stage1-train-05389 | container or food | I need a low-poly taco shell. | Asset: Folded taco shell
Triangle budget: 300
Brief: Empty corn tortilla shell folded into a U: rounded floor running left-right along X, two slightly leaning walls rising to a crisp rim, thick-ish single-wall shell with visible inner surface. Warm toasted golden tan, slightly darker rim edge, opening facing up and +Z.... |
stage1-train-05390 | bird, sea creature or bug | I need a low-poly tadpole madtom. | Asset: Mottled tadpole madtom
Triangle budget: 500
Brief: Small bottom-dwelling catfish facing +Z, its flat belly almost resting at y=0: plump tapered body widest at the shoulders, blunt rounded head, thin tapering tail. Navy back fading to an ivory belly, dark brown barbels at the mouth, black bead eyes, small rounded... |
stage1-train-05391 | vehicle | Build a low-poly tag-along bike. | Asset: Tag-along bike
Triangle budget: 550
Brief: Child's trailer bike: single rear wheel, long low frame bar sloping forward to a hitch stub (+Z), saddle on a seatpost, wide handlebars on a riser at the front, one pedal crank. Navy frame with black wheel and ivory saddle.
Required named parts: wheel, frame_bar, hitch,... |
stage1-train-05392 | container or food | I need a low-poly tagine pot. | Asset: Rust-glazed tagine pot
Triangle budget: 400
Brief: Moroccan tagine: shallow round base dish with a slight lip, a tall conical lid resting on the dish rim tapering to a point, small knob at the apex, two small loop handles on the dish sides. Rust terracotta with a brass knob.
Required named parts: base_dish, lid,... |
stage1-train-05393 | container or food | Build a low-poly tailgate food trunk. | Asset: Tailgate food trunk
Triangle budget: 500
Brief: Sturdy chest cooler sitting on the ground: a tall rectangular tub body with a slightly overhanging domed lid hinged at the back, a brass latch plate on the front, and two iron side handles. Navy body, ivory lid.
Required named parts: body, lid, latch, handle_left, ... |
stage1-train-05394 | tool or gear | I need a low-poly tailor's chalk. | Asset: Tailor's chalk wedge
Triangle budget: 200
Brief: Small flat triangular chalk slab lying flat, slightly beveled edges and one squared-off gripping end, ivory coloured, with a thin navy wrapper band wrapping its middle. No text, sits flat on the ground.
Required named parts: chalk_wedge, wrapper_band
```javascrip... |
stage1-train-05395 | container or food | I need a low-poly takeaway coffee cup. | Asset: Takeaway coffee cup
Triangle budget: 300
Brief: Tapered paper cup standing upright, slightly narrower at the base, a wide flat lid sitting on the rim with a small raised drinking spout, and a corrugated sleeve band wrapping the middle. Ivory cup, navy lid, sage sleeve.
Required named parts: cup, lid, sleeve
```... |
stage1-train-05396 | container or food | I need a low-poly takeout noodle box. | Asset: Takeout noodle carton
Triangle budget: 400
Brief: Classic folded paper carton standing upright: tapered four-sided body widening at the top rim, two lid flaps folded open and angled outward, thin brass wire handle arching over the top, a rust-coloured band wrapping the lower body. Ivory carton, faces +Z.
Require... |
stage1-train-05397 | container or food | Build a low-poly takoyaki pan. | Asset: Cast-iron takoyaki pan
Triangle budget: 550
Brief: Shallow rectangular cast-iron griddle, long axis along X, thick rimmed edge, with six round hemispherical dimples in two rows of three set into the top face; a loop handle on each short end with darkWood grips. Iron body, brass trim on the rim.
Required named pa... |
stage1-train-05398 | plant or nature | Build a low-poly talc stone. | Asset: Pale talc stone
Triangle budget: 300
Brief: A chunky pale soapstone lump resting on the ground: one large rounded-blocky rock with broad deliberate planar facets, a smaller lump fused to its side, and one flat cleavage face cut into the top-front showing a lighter ivory interior. Body pale grey-green with soft i... |
stage1-train-05399 | fantasy or game | I need a low-poly talking drum. | Asset: Talking drum
Triangle budget: 500
Brief: Hourglass talking drum standing upright on its lower ivory drumhead, two flared conical halves pinching to a narrow waist, top drumhead capped with a small brass ring; laced tension cords zig-zag down both visible sides of the waist. Oak body, ivory heads, darkWood cords,... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.