id stringlengths 18 18 | category stringclasses 10
values | prompt stringlengths 21 68 | response stringlengths 1.18k 11.4k |
|---|---|---|---|
stage1-train-05400 | furniture | I need a tall low-poly bookcase. | Asset: Tall bookcase
Triangle budget: 500
Brief: Tall narrow bookcase standing upright, slightly deeper than wide, with two side panels, a solid back panel, and four evenly spaced shelves; a small plinth at the base. Dark wood frame with oak shelves.
Required named parts: side_left, side_right, back_panel, shelf_1, she... |
stage1-train-05401 | plant or nature | I need a low-poly coconut palm. | Asset: Tall coconut palm
Triangle budget: 900
Brief: A tall slender palm: a slightly leaning trunk of stacked tapering segments (oak with darker banding), six long fronds fanning out from the crown and drooping at the tips, and a small cluster of dark coconuts tucked under the crown. Upright, facing +Z.
Required named ... |
stage1-train-05402 | architecture | Build a tall low-poly concrete silo. | Asset: Tall concrete silo
Triangle budget: 500
Brief: Slim cylindrical silo with an 8-sided drum, a wide low base skirt at the ground, a shallow conical cap on top, and a thin ladder running up the front (+Z) face with a small iron hatch beside it. Flat concrete grey body, dark iron ladder and hatch.
Required named par... |
stage1-train-05403 | plant or nature | I need a low-poly tall cylinder planter with a plant in it. | Asset: Tall cylinder planter
Triangle budget: 400
Brief: Cylindrical planter standing on the ground: tall straight-sided iron drum, slightly flared ivory rim, dark soil disc just below the rim, and a small clump of planar sage leaves rising on short stems. Pot faces +Z with a subtle front seam ridge.
Required named par... |
stage1-train-05404 | plant or nature | Build a low-poly tall fern. | Asset: Tall fern
Triangle budget: 650
Brief: Arching fern: short central crown at ground, six tapered frond blades radiating outward and upward, the tallest upright in the middle and shorter ones splaying low, each frond a flat serrated blade with a thin oak stem. Sage foliage.
Required named parts: crown, frond_1, fro... |
stage1-train-05405 | container or food | I need a low-poly tall drinking glass. | Asset: Tall glass tumbler
Triangle budget: 300
Brief: Straight-sided tumbler, slightly tapered narrower at the base, open hollow top with a visible rim thickness, thick solid base disc. Tinted glass: pale sage with ivory rim highlight.
Required named parts: body, base, rim
```javascript
function buildAsset(THREE) {
... |
stage1-train-05406 | furniture | Build a low-poly tall kitchen cupboard. | Asset: Tall larder cupboard
Triangle budget: 550
Brief: Upright tall cupboard facing +Z, standing on the ground: a tall oak carcass with a narrow drawer at the bottom, two full-height doors above it, a shallow dark-wood cornice cap, and small brass bar handles on each door. Doors sit flush in a recessed dark-wood frame... |
stage1-train-05407 | furniture | I need a low-poly tall linen cupboard. | Asset: Tall linen cupboard
Triangle budget: 400
Brief: Linen cupboard: tall narrow rectangular carcass standing on four short legs, two full-height doors on the front (+Z) with round knobs, small cornice cap on top, plain side panels. Oak carcass with darkWood knobs.
Required named parts: carcass, door_left, door_right... |
stage1-train-05408 | architecture | Build a low-poly minaret. | Asset: Tall minaret
Triangle budget: 700
Brief: Slender tapering square tower on a wider base, a projecting balcony with a low railing partway up, a narrower upper shaft, and a small dome cap with a finial spike. Ivory stone with sage trim and brass finial, standing on the ground at y=0, front faces +Z.
Required named ... |
stage1-train-05409 | furniture | Build a low-poly tall nightstand. | Asset: Tall nightstand
Triangle budget: 400
Brief: Narrow bedside cabinet, taller than wide, standing square to the viewer: boxy oak carcass with a flat overhanging top, a single drawer in the upper front with a small brass knob, and four slim darkWood legs lifting it off the ground. No plinth.
Required named parts: to... |
stage1-train-05410 | architecture | Build a low-poly obelisk. | Asset: Weathered obelisk
Triangle budget: 250
Brief: Tall square obelisk standing upright: a stepped two-tier base, a long four-sided shaft tapering gently toward the top, capped by a small pyramidion. Pale weathered stone.
Required named parts: base, shaft, pyramidion
```javascript
function buildAsset(THREE) {
cons... |
stage1-train-05411 | container or food | I need a low-poly oil tin. | Asset: Tall oil tin
Triangle budget: 350
Brief: Tall slim can standing upright: slightly tapered cylindrical body, flat top with a small brass screw cap offset to one side, thin iron wire handle looping over the top, a rust-coloured band around the lower body. Front faces +Z.
Required named parts: body, cap, handle, ba... |
stage1-train-05412 | animal | I need a low-poly ostrich. | Asset: Tall ostrich
Triangle budget: 700
Brief: Standing ostrich: egg-shaped feathered body held high, long S-curved neck rising up, small head with a flat ivory beak, two long bare legs with big two-toed feet, short drooping wings on each flank, fan of tail feathers at the back. Body navy-black, neck and legs ivory wi... |
stage1-train-05413 | container or food | I need a low-poly tall bottle. | Asset: Slender green bottle
Triangle budget: 350
Brief: Wine bottle standing upright: tall straight cylindrical body (8 sides) with a short shoulder tapering into a slender neck, a small flared lip at the top; a flat brass cap disc closing the mouth. Sage glass body, brass cap.
Required named parts: body, shoulder, nec... |
stage1-train-05414 | architecture | Build a low-poly tall church spire. | Asset: Bell tower spire
Triangle budget: 700
Brief: Square stone tower with a belfry opening on each face, topped by a slender tapering pyramid spire with a small brass finial. Ivory stone body, iron spire, upright and centered, front faces +Z.
Required named parts: tower, belfry_opening_front, belfry_opening_back, bel... |
stage1-train-05415 | architecture | Build a low-poly church with a tall spire. | Asset: Tall spire church
Triangle budget: 900
Brief: Small stone chapel facing +Z: rectangular nave with a gabled roof, a square tower at the front, and a slender tapering spire on top of the tower; an arched door in the tower base and two small ivory windows in the nave wall. Ivory stone, darkWood roof and door, brass... |
stage1-train-05416 | prop | I need a tall low-poly street lamp. | Asset: Tall street lamp
Triangle budget: 500
Brief: Tall iron street lamp standing straight: wide stepped foot, long slender tapered post, short cross-arm near the top holding a lantern on each side, each lantern four-sided with ivory panes and a brass finial. Face +Z.
Required named parts: foot, post, crossarm, lanter... |
stage1-train-05417 | plant or nature | Build a low-poly tall tree stump. | Asset: Weathered tall stump
Triangle budget: 400
Brief: A tall, slightly tapered stump standing upright, its flat sawn top showing a pale ivory heartwood disc ringed by dark bark. Three low buttress roots splay out at the base, with one broken branch stub on the side; oak trunk with darkWood bark ridges.
Required named... |
stage1-train-05418 | prop | I need a low-poly traffic cone. | Asset: Tall traffic cone
Triangle budget: 250
Brief: Tall cone standing upright on a square flat base plate, hollow-sloped sides with a single ivory reflective band wrapping mid-height, square foot slightly wider than the cone base. Rust-orange cone, black base.
Required named parts: cone_body, reflective_band, base
`... |
stage1-train-05419 | container or food | I need a tall low-poly travel mug. | Asset: Tall travel mug
Triangle budget: 400
Brief: Upright tall tapered mug standing on its base, slightly narrower at the top, with a snug overhanging lid, a small raised sip spout, and a flip tab on top. Iron body with a black grip band and lid, brass tab.
Required named parts: body, grip_band, lid, spout, flip_tab
... |
stage1-train-05420 | container or food | Build a low-poly tall vinegar bottle. | Asset: Tall vinegar bottle
Triangle budget: 350
Brief: Upright bottle standing on a flat base: tall slim square-shouldered body (octagonal cross-section) rising to a narrow neck, topped with a oak cork. A sage glass body with an ivory label band around the middle and a brass neck ring.
Required named parts: body, neck,... |
stage1-train-05421 | furniture | I need a tall wooden cupboard for a low-poly scene. | Asset: Tall oak cupboard
Triangle budget: 700
Brief: Upright tall cupboard facing +Z: deep rectangular carcass roughly 1:2.5 width-to-height, two full-height doors covering the front, a slight overhanging cornice on top and a shallow plinth at the base. Oak carcass and doors, darkWood plinth and cornice, small brass ha... |
stage1-train-05422 | plant or nature | Build a low-poly talus block. | Asset: Fractured talus block
Triangle budget: 300
Brief: Chunky angular boulder: a broad wedge-shaped main mass with deliberate flat facets, widest at the ground and leaning slightly, plus two smaller broken chips fused to its lower side. Iron grey with a few darker black faces for facet contrast; flat base resting at ... |
stage1-train-05423 | container or food | I need a low-poly tamagoyaki pan. | Asset: Rectangular tamagoyaki pan
Triangle budget: 300
Brief: Square shallow iron pan resting flat, its long darkWood handle extending straight back (-Z), joined by a small brass collar. Slightly raised rim around the pan floor, no food inside; flat-shaded with crisp planar corners.
Required named parts: pan_body, rim,... |
stage1-train-05424 | vehicle | Build a low-poly tandem bicycle. | Asset: Tandem bicycle
Triangle budget: 900
Brief: Two-seat bicycle standing upright on two spoked wheels, front +Z: long stretched frame with two saddles in line, front and rear handlebars, two pedal cranks between the wheels. Iron frame with darkWood saddles and brass trim.
Required named parts: frame, wheel_front, wh... |
stage1-train-05425 | vehicle | Build a low-poly tandem road roller. | Asset: Tandem roller
Triangle budget: 700
Brief: Tandem roller facing +Z: wide smooth iron drum front and rear, low navy frame deck spanning between them, boxy cab with ivory-tinted glass set slightly rear of centre, small canopy roof, upright exhaust pipe near the cab. Black drum ends, brass trim.
Required named parts... |
stage1-train-05426 | vehicle | Build a low-poly tandem-rotor helicopter. | Asset: Tandem-rotor helicopter
Triangle budget: 900
Brief: Long boxy fuselage with rounded nose facing +Z and a raised rear pylon, two pylons fore and aft each carrying a two-blade rotor (front rotor over the cabin, rear rotor higher on the tail pylon), four simple splayed landing struts resting near y=0. Iron body wit... |
stage1-train-05427 | architecture | Build a low-poly tanker loading rack. | Asset: Tanker loading rack
Triangle budget: 900
Brief: Industrial loading gantry facing +Z: two pairs of iron upright posts carrying a raised grated platform deck, an access stair at the back (-Z), a simple railing around the deck edge, and a brass loading arm with a drooping hose hanging over the front edge. Iron fram... |
stage1-train-05428 | architecture | Build a low-poly tannery workshop. | Asset: Timber tannery
Triangle budget: 1000
Brief: Small single-storey workshop facing +Z: plank-walled body with a steep gabled roof, stone chimney at one rear corner, plank door and one small shuttered window on the front, and a lean-to drying rack of poles against the front wall over two low round tanning vats. Oak ... |
stage1-train-05429 | architecture | Build a low-poly Taoist temple shrine. | Asset: Hillside Taoist shrine
Triangle budget: 950
Brief: Small Taoist shrine facing +Z: low stone platform with a short front step, two rust-red columns at the front corners, an ivory-doored body set back between them, and a two-tier navy hip roof with upturned eaves topped by a brass finial. Compact and toy-like, all... |
stage1-train-05430 | tool or gear | I need a low-poly tape dispenser. | Asset: Desktop tape dispenser
Triangle budget: 400
Brief: Weighted desktop dispenser: elongated wedge base with a raised rounded rear housing, a horizontal spindle holding a tape roll, and a serrated iron blade edge at the front. Ivory base, darkWood roll core.
Required named parts: base, housing, spindle, tape_roll, b... |
stage1-train-05431 | architecture | I need a low-poly tapered skyscraper. | Asset: Tapered tower
Triangle budget: 700
Brief: Downtown tower: a low wide podium at ground level, then three stacked square shafts each narrower and shorter than the one below, topped by a small crown block and a slender tapered spire. Navy glass bodies with iron corner ribs and a brass spire.
Required named parts: p... |
stage1-train-05432 | prop | I need a low-poly archery target. | Asset: Archery target board
Triangle budget: 400
Brief: Round straw target disc tilted upright on a simple A-frame wooden stand, concentric painted rings on the face toward +Z, a brass pin at the centre. Straw ivory face with rust and navy rings.
Required named parts: target_face, ring_mid, ring_center, frame_left, fra... |
stage1-train-05433 | fantasy or game | I need a low-poly tarot card prop. | Asset: Gilded tarot card
Triangle budget: 450
Brief: An upright card standing on its bottom edge, tilted back a few degrees, front face +Z: a thin ivory card body with a raised brass border frame, an inset navy face panel, and a flat brass crescent moon with two small stars on the face.
Required named parts: card_body,... |
stage1-train-05434 | fantasy or game | Build a low-poly tarot deck. | Asset: Weathered tarot deck
Triangle budget: 250
Brief: A small deck of cards lying flat: a tight block of ivory-edged cards, with the top card slid partway off at a slight angle, navy back facing up, bearing a flat brass crescent-moon emblem. Sits flat on the ground.
Required named parts: card_stack, top_card, moon_em... |
stage1-train-05435 | tool or gear | I need a low-poly tarp shelter. | Asset: Lean-to tarp shelter
Triangle budget: 400
Brief: Lean-to: sage tarp stretched over a single ridge pole on two upright posts at the front, sloping down to two short back stakes, tarp edges hemmed with taut guy lines. Front open toward +Z.
Required named parts: tarp_canopy, ridge_pole, post_front_left, post_front_... |
stage1-train-05436 | container or food | I need a low-poly tart pan with a tart in it. | Asset: Fluted tart pan
Triangle budget: 400
Brief: Round tart pan with fluted rim, sitting flat, viewed from a slight above: shallow iron dish with a ring of fluted scallops, a rust-coloured tart filling slightly domed inside, ivory crust edge tucked under the rim.
Required named parts: pan_base, fluted_rim, tart_filli... |
stage1-train-05437 | container or food | Build a low-poly tarte tatin in its dish. | Asset: Tarte tatin dish
Triangle budget: 450
Brief: Shallow round iron dish with a low flared rim, filled by a domed tarte of overlapping caramelised apple wedges radiating from the centre, pastry edge tucked just inside the rim. Dish in iron, apple wedges in rust with brass highlight edges, pastry in ivory. Sits flat,... |
stage1-train-05438 | container or food | I need a low-poly tartlet tin. | Asset: Fluted tartlet tin
Triangle budget: 350
Brief: Small round tartlet tin sitting upright: shallow fluted cup with slightly tapered sides, a thin rolled rim, and a flat recessed base. Iron metal with a pale ivory pastry lining just below the rim.
Required named parts: tin_body, rim, pastry
```javascript
function b... |
stage1-train-05439 | fantasy or game | Build a low-poly tattered banner on a pole. | Asset: Tattered banner
Triangle budget: 400
Brief: A vertical dark-wood pole with a brass spearhead finial, a short crossbar near the top, and a hanging cloth banner with a ragged torn bottom edge and a couple of notches in its side. Front faces +Z, banner hangs flat with slight ripples.
Required named parts: pole, fin... |
stage1-train-05440 | container or food | I need a low-poly tea caddy. | Asset: Brass-latched tea caddy
Triangle budget: 350
Brief: Small rectangular tea caddy standing upright, slightly domed hinged lid on top, thin brass keyhole plate on the front face, two short dark feet. Oak body with ivory lid trim; front faces +Z.
Required named parts: body, lid, hinge, keyhole_plate, foot_left, foot... |
stage1-train-05441 | container or food | I need a low-poly tea case. | Asset: Wooden tea case
Triangle budget: 350
Brief: Small lidded tea caddy standing on the ground: boxy oak body slightly wider than tall, a fitted lid on top with a slight overhang, a brass latch at the front centre, two brass hinges at the back, four short dark wood feet. Front face +Z, closed.
Required named parts: b... |
stage1-train-05442 | container or food | I need a low-poly tea tin. | Asset: Tea tin
Triangle budget: 350
Brief: Upright cylindrical tin with a slightly overhanging push-on lid and a small brass knob on top; a brass band wraps the body near the base. Navy body with brass lid and band, ivory lid rim. Sits on ground at y=0, axis vertical.
Required named parts: body, lid, knob, band
```jav... |
stage1-train-05443 | container or food | I need a low-poly tea tin. | Asset: Tea tin canister
Triangle budget: 300
Brief: Cylindrical tea tin, wide squat body with a slightly overhanging slip lid, a thin brass band around the mid-body, and a small knob on the lid top. Navy body with brass trim and ivory lid.
Required named parts: body, lid, lid_knob, band
```javascript
function buildAss... |
stage1-train-05444 | furniture | Build a low-poly tea trolley. | Asset: Tea trolley
Triangle budget: 700
Brief: Two-tier serving cart: rectangular top shelf with rounded corners and a lower shelf between four corner posts, small casters under each post, a curved handle bar at one end. Oak shelves with darkWood frame, brass casters.
Required named parts: top_shelf, lower_shelf, leg_f... |
stage1-train-05445 | plant or nature | I need a low-poly teak tree. | Asset: Young teak tree
Triangle budget: 700
Brief: Upright teak tree: tall slightly tapered trunk with a flared root base, two short angled branches near the top, and three overlapping broad-leaf canopy clusters stacked above. Oak trunk with sage foliage.
Required named parts: trunk, root_flare, branch_left, branch_rig... |
stage1-train-05446 | architecture | Build a low-poly tech office building. | Asset: Compact tech office block
Triangle budget: 700
Brief: Modern office slab facing +Z: a tall boxy tower with two recessed horizontal curtain-wall bands of navy glass between iron spandrels, an ivory lobby volume at ground level with dark double doors, a small brass entrance canopy, and a rooftop mechanical box wit... |
stage1-train-05447 | prop | I need a low-poly teething ring toy. | Asset: Teething ring
Triangle budget: 500
Brief: Flat oval ring (ivory, faceted torus of 12 segments) with three smooth beads threaded on it at intervals (oak, sage, brass) and a small flat wooden tag charm hanging from the ring's lower edge. Ring lies in the vertical XZ plane, upright, centred on origin.
Required name... |
stage1-train-05448 | architecture | Build a low-poly telecom switching building. | Asset: Telecom switching building
Triangle budget: 700
Brief: Small flat-roofed utility building standing on the ground at y=0: a plain windowless box body with a slightly overhanging flat roof, a single steel door centred on the +Z face, two louvered vents high on the walls, and a short mast with a small microwave dis... |
stage1-train-05449 | fantasy or game | I need a low-poly teleport scroll prop, a bit magical. | Asset: Sealed teleport scroll
Triangle budget: 500
Brief: An unrolled scroll standing upright, facing +Z: a bowed ivory parchment sheet stretched between a darkWood dowel at the top and one at the bottom, with each side edge rolled into a tight vertical curl. A navy ribbon band crosses the middle, held by a chunky bras... |
stage1-train-05450 | vehicle | I need a low-poly telescopic crane. | Asset: Compact telescopic crane
Triangle budget: 900
Brief: Small wheeled crane truck facing +Z: flat carrier deck on four chunky iron wheels, navy cab at the front, a sage telescoping boom angled up and forward from a turntable at the rear, with a short cable and brass hook hanging from the boom tip. Two rust outrigge... |
stage1-train-05451 | tool or gear | Build a low-poly telescoping inspection mirror. | Asset: Telescoping inspection mirror
Triangle budget: 400
Brief: Pocket inspection mirror standing upright: short oak handle at the bottom, three nested iron shaft segments rising to a brass swivel joint, and a round iron mirror frame on top tilted to face +Z with an ivory glass disc. Handle vertical, mirror head angle... |
stage1-train-05452 | architecture | Build a low-poly temple gate. | Asset: Weathered temple gate
Triangle budget: 700
Brief: Torii-style gate facing +Z: two thick vertical pillars, a broad top lintel with gently upturned ends, a second straight crossbeam below it, and a small central strut between the two beams. Dark wood with rust-red pillar bases.
Required named parts: pillar_left, p... |
stage1-train-05453 | architecture | I need a low-poly temple tower. | Asset: Weathered temple tower
Triangle budget: 900
Brief: Square temple tower facing +Z: wide stone footing, then a tall lower body, flared eave roof, narrower upper body, second flared roof and a slim brass finial spire on top; trunks taper upward, everything stacked and connected. Ivory stone, rust roofs, brass finia... |
stage1-train-05454 | prop | I need a low-poly tennis ball. | Asset: Tennis ball
Triangle budget: 350
Brief: Round ball slightly flattened at the poles, faceted sphere, with two interlocking seam curves wrapping the surface as thin raised ribbons, colour a flat yellow-green with ivory seam lines. No text, no logos.
Required named parts: ball, seam_curve_1, seam_curve_2
```javasc... |
stage1-train-05455 | prop | I need a low-poly tennis racket. | Asset: Wooden tennis racket
Triangle budget: 400
Brief: Racket standing upright: oval head frame in the XY plane at the top, facing +Z, with a flat ivory string bed inset in the oval, a short tapered throat joining head to a straight handle running down to the ground, and a wrapped grip at the bottom end. Oak frame, da... |
stage1-train-05456 | tool or gear | I need a low-poly tenon saw. | Asset: Brass-backed tenon saw
Triangle budget: 250
Brief: Tenon saw lying flat-ish with the blade pointing +Z: a tapered iron blade with a toothed lower edge, a thick brass spine along its top edge, and a closed oak handle at the back (-Z) with a grip hole. All parts joined.
Required named parts: blade, spine, handle, ... |
stage1-train-05457 | tool or gear | I need a low-poly camping fan for a tent. | Asset: Portable tent fan
Triangle budget: 550
Brief: Small clip-on tent fan facing +Z: round wire cage with a rim ring and radial spokes, three flat blades around a hub, compact cylindrical housing behind, and a spring clamp base gripping below with two jaws. Iron cage and housing, sage blades, brass clamp screw.
Requi... |
stage1-train-05458 | tool or gear | I need a low-poly tent pole segment. | Asset: Brass-ferruled tent pole segment
Triangle budget: 250
Brief: Standing pole segment: slim eight-sided oak shaft upright on the ground, a wider brass socket ferrule at the bottom end and a small iron pin nub capping the top, everything axially connected. Y up, vertical.
Required named parts: pole_shaft, ferrule_bo... |
stage1-train-05459 | tool or gear | I need a low-poly tent repair patch. | Asset: Tent repair patch
Triangle budget: 300
Brief: Square fabric patch with rounded corners, lying nearly flat and slightly domed in the middle, its border ringed with visible running stitches. Sage fabric with ivory thread; a thinner backing layer peeks out along one edge.
Required named parts: patch, backing, stitc... |
stage1-train-05460 | fantasy or game | Build a low-poly squid mascot character. | Asset: Cheery squid mascot
Triangle budget: 900
Brief: Friendly squid standing on its arm tips: rounded mantle body cocked slightly, two small side fins, two big ivory eyes on the front, and eight short arms splayed outward around the base resting on the ground. Navy body with rust fin edges.
Required named parts: mant... |
stage1-train-05461 | bird, sea creature or bug | Build a low-poly termite. | Asset: Worker termite
Triangle budget: 450
Brief: Pale wingless worker termite in side-on crawling pose: elongated segmented grub body (fat abdomen tapering to a narrow waist), round amber head at +Z with two forward-pointing rust mandibles and two short beaded antennae, six short dark legs splayed to the ground. Body ... |
stage1-train-05462 | bird, sea creature or bug | Build a low-poly seabird feather. | Asset: Sea-tern feather
Triangle budget: 250
Brief: Single tern feather resting upright on its quill tip: a slim curved quill rising from the ground, a flat tapered vane split into two halves with a shallow notch, pale ivory at the base shading to navy at the tip. Slight S-curve, flat plane facing +Z.
Required named pa... |
stage1-train-05463 | bird, sea creature or bug | I need a low-poly sea tern figure. | Asset: Perched tern figure
Triangle budget: 400
Brief: Standing sea tern: slim ivory body tapering to a long forked tail behind, small head with a black cap and a pointed rust beak, two folded iron-grey wings held flat against the sides, thin rust legs on the ground. Upright, facing +Z.
Required named parts: body, head... |
stage1-train-05464 | architecture | I need a low-poly terraced apartment block. | Asset: Narrow terraced townhouses
Triangle budget: 900
Brief: A straight row of three equal attached townhouse units along X, front facade facing +Z, shared party walls, no plinth. Long ivory facade block with three darkWood doors, one iron window band per unit, three oak pitched roofs connected at the ridges, and two ... |
stage1-train-05465 | plant or nature | I need a low-poly terracotta flower pot. | Asset: Terracotta flower pot
Triangle budget: 350
Brief: Tapered eight-sided pot with a thick protruding rim at the top, packed dark soil inside below the rim, and a small sage-green plant sprouting three flat leaves. Pot in rust terracotta, soil darkWood, leaves sage. Upright, opening facing +Y.
Required named parts: ... |
stage1-train-05466 | container or food | Build a low-poly terracotta fruit bowl. | Asset: Terracotta fruit bowl
Triangle budget: 450
Brief: Wide shallow bowl with a gently flared rim and a small foot ring, terracotta rust outside and ivory glazed inside, holding three simple low-poly fruits piled in the centre — two round rust apples and one sage pear. Sits level on the ground, opening up.
Required n... |
stage1-train-05467 | container or food | I need a low-poly terracotta wine jug. | Asset: Terracotta wine jug
Triangle budget: 400
Brief: Round-bellied jug with a narrow neck and flared lip, one thick loop handle from neck to shoulder, small flat foot; belly widest just above mid-height. Rust terracotta body with a dark iron band at the neck.
Required named parts: body, neck, lip, handle, foot
```ja... |
stage1-train-05468 | animal | Build a low-poly terror bird. | Asset: Terror bird
Triangle budget: 900
Brief: Standing flightless predator facing +Z: bulky rust body held horizontal on two long powerful legs, S-curved neck rising to a large head with a heavy hooked darkWood beak, small folded wings at the flanks, stiff tail feathers back at -Z, three-toed clawed feet flat on the g... |
stage1-train-05469 | prop | I need a low-poly tetherball pole. | Asset: Tetherball pole
Triangle budget: 400
Brief: Vertical iron pole set in a low wide round base plate, small brass cap at the top; a taut cord runs from the cap down to an ivory tetherball hanging at mid-height, offset toward +Z. Everything hangs connected.
Required named parts: base, pole, cap, cord, ball
```javas... |
stage1-train-05470 | architecture | Build a low-poly textile mill building. | Asset: Stone textile mill
Triangle budget: 900
Brief: Mill: long three-storey stone block (sage-tinted), sawtooth skylight roof with ivory glazing, tall brick chimney at one end, rows of iron-framed windows, a water wheel on the front face. Front faces +Z.
Required named parts: mill_body, sawtooth_roof, chimney, window... |
stage1-train-05471 | architecture | Build a low-poly thatched cottage. | Asset: Thatched Frisian house
Triangle budget: 850
Brief: Small Frisian cottage facing +Z: rectangular ivory-walled body under a large steep thatched roof with deep overhanging eaves, a dark oak door centered on the front, two small square windows flanking it, and a short brick chimney on the roof ridge. Front gable wa... |
stage1-train-05472 | architecture | Build a low-poly thatched Japanese farmhouse. | Asset: Thatched farmhouse
Triangle budget: 900
Brief: Single-storey minka: boxy ivory plaster walls on a dark timber frame, thick steep thatched hip roof in oak-brown with a chunky ridge cap, a sliding door on the front (+Z) and two small dark windows. Roof overhangs the walls on all sides.
Required named parts: walls,... |
stage1-train-05473 | architecture | Build a low-poly thatched round hut. | Asset: Thatched round hut
Triangle budget: 800
Brief: Small round hut: a squat cylindrical ivory wall with a conical thatch roof overhanging it in stepped oak courses, a plank door on the front (+Z) under a darkWood lintel, and a darkWood ring beam circling the wall top. One tiny black window beside the door.
Required ... |
stage1-train-05474 | architecture | Build a low-poly thatched round hut. | Asset: Thatched tukul hut
Triangle budget: 800
Brief: Round tukul hut: short cylindrical mud wall (10-12 sides), tall conical thatch roof overhanging the wall with a ragged fringe, one dark rectangular doorway on the +Z face, walls in ivory-clay tone with an oak door frame.
Required named parts: wall, roof_thatch, roof... |
stage1-train-05475 | architecture | Build a low-poly theater building. | Asset: Little theater
Triangle budget: 900
Brief: Small corner theater facing +Z: boxy facade with a tall central entrance bay, a projecting flat marquee canopy over the doors, a blank sign board above it, two doors flanked by short columns, and a shallow stepped cornice. Ivory walls, navy marquee, brass trim.
Required... |
stage1-train-05476 | container or food | I need a low-poly thermal carafe. | Asset: Thermal carafe
Triangle budget: 400
Brief: Upright vacuum carafe: tapered cylindrical body widest at the base, dark iron with a brass base band, short spout at the front lip, chunky side handle on the right, domed lid on top with a small black lever. Front faces +Z.
Required named parts: body, base_band, spout, ... |
stage1-train-05477 | container or food | Build a low-poly thermal lunch pouch. | Asset: Thermal lunch pouch
Triangle budget: 400
Brief: Soft-sided cooler pouch standing upright: rounded rectangular navy body, a lid flap folded over the top front with a thin iron zipper strip along its edge, and a single arched carry handle on top. Sits flat on the ground, front faces +Z.
Required named parts: pouch... |
stage1-train-05478 | furniture | I need a low-poly thermal receipt printer. | Asset: Compact receipt printer
Triangle budget: 400
Brief: Small countertop receipt printer: squat boxy body with a slightly overhanging curved lid, a horizontal paper slot on the front with a receipt sheet curling up out of it, one round button and a small indicator on the front face. Black body, iron lid, ivory paper... |
stage1-train-05479 | container or food | I need a low-poly thermos carrier pouch. | Asset: Canvas thermos pouch
Triangle budget: 400
Brief: Cylindrical fabric pouch standing upright on the ground, sage canvas body with a top drawstring rim; an iron thermos cap peeks above the rim; a short arched carry handle over the top and one small side pocket. Front faces +Z.
Required named parts: pouch_body, cap,... |
stage1-train-05480 | animal | Build a low-poly thick-headed dinosaur. | Asset: Thick-headed dinosaur
Triangle budget: 750
Brief: Bipedal pachycephalosaur standing with head forward (+Z), heavy tail counterbalancing behind (-Z). Rounded body, thick bony skull dome with small horns and snout, two stubby front arms, two strong hind legs with flat feet on the ground. Sage body with ivory dome,... |
stage1-train-05481 | plant or nature | I need a low-poly thick log. | Asset: Thick fallen log
Triangle budget: 350
Brief: A short felled log lying along X on the ground: chunky eight-sided trunk with flat cut ends at left and right showing ivory heartwood rings, darkWood bark band around the middle, one small stub branch. Oak bark, ivory cut faces.
Required named parts: trunk, cut_face_l... |
stage1-train-05482 | bird, sea creature or bug | Build a low-poly thorny sea star. | Asset: Thorny sea star
Triangle budget: 500
Brief: Five-armed sea star lying flat on the ground: a low domed central disc with five tapered arms radiating out, one arm pointing +Z, each arm ending in a blunt rounded tip. Along the top of every arm sits a short row of small pyramidal thorns. Body rust #b65f3b, thorn tip... |
stage1-train-05483 | tool or gear | Build a low-poly thread spool. | Asset: Wooden thread spool
Triangle budget: 300
Brief: Upright spool standing on its lower flange: two round oak discs (10-sided) with a wound thread barrel between them, thread in sage with a couple of flat wrap bands, small darkWood core visible at top centre.
Required named parts: flange_bottom, flange_top, thread_b... |
stage1-train-05484 | tool or gear | I need a low-poly thread tap tool. | Asset: Machine thread tap
Triangle budget: 400
Brief: Hand tap standing upright on its chamfered tip: straight cylindrical shank with a square drive at the top, and a fluted threaded cutting section below (four flutes as flat grooves, thread simplified into a few stacked ridges). Iron body with a brass square drive.
Re... |
stage1-train-05485 | bird, sea creature or bug | Build a low-poly threadfin acara fish. | Asset: Threadfin acara
Triangle budget: 550
Brief: Deep-bodied cichlid hovering level with its belly just above y=0, facing +Z: tall oval body tapering to a fan tail, small blunt head with two eyes, a long dorsal fin along the back whose rear rays trail into a thin thread, matching anal fin below, two small pectoral fi... |
stage1-train-05486 | furniture | I need a low-poly three-hole punch. | Asset: Iron three-hole punch
Triangle budget: 400
Brief: Desk three-hole punch: flat rectangular base plate on the ground, a hinged lever arm rising toward the back, slim brass grip bar on the lever's front edge, three punch pins hanging under the lever, small paper guide lip at the front. Iron body with brass accents.... |
stage1-train-05487 | animal | Build a low-poly three-horned dinosaur. | Asset: Three-horned dinosaur
Triangle budget: 900
Brief: Stocky triceratops standing on four short legs, head facing +Z with a broad bony frill swept back, one short nose horn and two long brow horns pointing forward-up, thick tapering tail to -Z. Sage body, ivory horns and beak, darkWood hoof tips.
Required named part... |
stage1-train-05488 | tool or gear | Build a low-poly three-ring binder. | Asset: Three-ring binder
Triangle budget: 400
Brief: A binder standing upright on its bottom edge, spine at the left, front cover swung open about 30° so the ring mechanism is visible; navy front and back covers, a thin ivory page block inside, and three evenly spaced iron rings along the spine. Covers are thin slabs, ... |
stage1-train-05489 | bird, sea creature or bug | Build a low-poly stickleback fish. | Asset: Three-spined stickleback
Triangle budget: 400
Brief: Laterally flattened torpedo body facing +Z, belly resting on the ground, tapering to a fan tail at -Z. Three short ivory spines stand along the back, with small pectoral fins on each flank and black eyes near the snout. Sage body, ivory underside and spines.
R... |
stage1-train-05490 | tool or gear | I need a low-poly three-tine cultivator. | Asset: Three-tine cultivator
Triangle budget: 350
Brief: Hand garden cultivator standing upright: oak handle at the top, iron ferrule and short shank, a flat crossbar head with three downward-curving iron tines evenly spaced. Front faces +Z, tines pointing down to y=0.
Required named parts: handle, ferrule, head_bar, t... |
stage1-train-05491 | bird, sea creature or bug | Build a low-poly thresher shark. | Asset: Whiptail thresher shark
Triangle budget: 700
Brief: Streamlined shark posed horizontally with nose facing +Z: tapered navy body, short snout, tall curved dorsal fin, two swept-back pectoral fins, black eyes, and the signature long whip-like tail stalk ending in a tall upper caudal lobe. Ivory belly patch underne... |
stage1-train-05492 | tool or gear | I need a low-poly throwing knife. | Asset: Throwing knife
Triangle budget: 300
Brief: Throwing knife lying flat, tip pointing +Z: flat leaf-shaped iron blade with a short central spine ridge, small iron crossguard, dark wood grip with two brass rivets, rounded pommel. Blade and guard meet the handle.
Required named parts: blade, guard, grip, pommel, rive... |
stage1-train-05493 | tool or gear | I need a low-poly throwing spear. | Asset: Throwing spear
Triangle budget: 250
Brief: Slim spear standing upright with point up: long oak shaft, a flat leaf-shaped iron head at the top, darkWood binding wraps below the head, small brass butt cap at the base. Vertical along Y, blade faces +Z.
Required named parts: shaft, spearhead, binding, butt_cap
```j... |
stage1-train-05494 | fantasy or game | Build a low-poly thunder hammer for a fantasy game. | Asset: Thunder hammer
Triangle budget: 550
Brief: Two-handed war hammer standing upright: long oak haft with iron butt cap, blocky iron head at the top with two flat striking faces and brass bands, a small sage lightning-bolt crest riveted to the head's side. Front faces +Z.
Required named parts: haft, butt_cap, head_b... |
stage1-train-05495 | plant or nature | Build a low-poly ti plant. | Asset: Ti plant
Triangle budget: 650
Brief: Ti plant: short slender woody trunk rising from the ground, topped with a whorl of long lance-shaped leaves radiating outward and slightly drooping. Trunk darkWood, leaves sage with a few rust-tipped older leaves low down.
Required named parts: trunk, leaf_1, leaf_2, leaf_3, ... |
stage1-train-05496 | architecture | Build a low-poly Tibetan nomad tent. | Asset: Nomad yak-hair tent
Triangle budget: 650
Brief: Low wide drokpa tent: a squat rounded ridge-shaped body of dark fabric, ridged peak running front-to-back with a darkWood ridge pole poking out at both ends, two upright support poles at the front entrance, and an ivory door flap on the +Z face. Two guy ropes angle... |
stage1-train-05497 | architecture | Build a low-poly Tibetan stone house. | Asset: Tibetan stone house
Triangle budget: 800
Brief: Squat flat-roofed house: a rough stone lower course, whitewashed ivory upper walls tapering slightly inward, a dark parapet band around the flat roof with a small corner post. Front face +Z has a dark wooden door and two small windows with black panes and darkWood ... |
stage1-train-05498 | bird, sea creature or bug | Build a low-poly tick. | Asset: Engorged tick
Triangle budget: 500
Brief: A plump seed tick: one big rounded oval abdomen (rust, flat-shaded, slightly flattened top and bottom), a small dark head capsule at the front (+Z) with short mouthparts, and four thin bent legs out each side splayed flat to the ground. Dark wood legs and head against th... |
stage1-train-05499 | architecture | I need a low-poly ticket booth. | Asset: Little ticket booth
Triangle budget: 500
Brief: Compact square booth facing +Z, oak body with an open front counter window, ivory window frame and counter ledge, darkWood flat overhanging roof with brass trim. Body sits on the ground, roof caps it, no plinth.
Required named parts: booth_body, roof, window_frame,... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.