Daily Papers

Single-cell perturbation atlases rarely measure every intervention in every cellular context: a query perturbation is often observed in one or more source contexts but missing in the recipient context where its effect is needed. Ignoring those measured responses discards query-specific experimental evidence, whereas copying or weakly calibrating them across contexts risks transferring the wrong signal. We propose PerturbMap, which predicts a missing recipient-context effect by combining a recipient-local low-rank base with accepted proposals that transport the same perturbation's measured source responses through source-to-recipient ridge experts fit on paired training perturbations, with proposal weights determined by route reliability estimated on validation anchors. On the Perturb-CITE-seq melanoma cohort, PerturbMap improves full-effect MSE by 4.1\% over a recipient-local low-rank base and achieves lower MSE than FedAvg, zero-response, raw-copy, calibrated-copy, and identity-shuffled affine controls. It remains within 2.82times10^{-6} MSE of our centralized token-matched pooled reference, which uses a stronger training interface. A condition-mean specificity diagnostic shows the same direction: same-recipient top-10 counterpart retrieval by cosine increases from 74.5\% for the low-rank base to 80.5\% for PerturbMap.

The EPIC-KITCHENS-100 Action Detection challenge evaluates whether a model can localize the start and end of each action in long untrimmed egocentric videos and assign the corresponding verb--noun action label. In this report, we formulate our submission as EgoAction (Egocentric Action Composition with Reliability-Aware Temporal Fusion), a unified decoupled detection and fusion pipeline. The pipeline uses EPIC-finetuned VideoMAE-L features, trains separate noun and verb temporal detectors with causal temporal modeling, composes action hypotheses from top noun--verb pairs, and introduces a confidence-adaptive boundary fusion rule at post-processing time. The key observation is that verb and noun streams often fail differently: verb scores are sensitive to motion transitions, whereas noun scores are sensitive to hand-object visibility and object clutter. A fixed arithmetic mean of their predicted boundaries can therefore amplify localization errors when one stream degenerates. We replace this hard-coded mean with Dynamic Weighted Fusion (DWF), which normalizes the maximum noun and verb classification confidences into proposal-wise boundary weights and linearly combines the two intervals. This lightweight tensor-only operator shifts boundary authority toward the more reliable stream while preserving the decoupled action scoring mechanism. Together with sliding-window inference, top-K noun--verb action composition, and class-wise Soft-NMS, EgoAction provides a compact and reproducible system for egocentric temporal action detection.

Many inference-time tasks for pretrained discrete diffusion models and diffusion language models reduce to drawing samples from a tilted version of the pretrained distribution. Feynman-Kac sequential Monte Carlo (SMC) makes this correction exact in principle, but its prescribed weights routinely degenerate when the proposal dynamics are misaligned with the tilt, capping the practical gains from additional particles. We introduce FluxLite, a lightweight, training-free proposal-control framework for discrete diffusion. On the sparse directed graph of pretrained reverse rates, any sparse jump-rate perturbation can be exactly compensated by a q_t-weighted graph-divergence term in the Feynman-Kac potential; the target path is therefore preserved while the residual reweighting variance becomes a local convex objective. We instantiate this principle as two practical samplers: a one-hop local reallocation rule (HEU) and a small nonnegative quadratic program over pretrained-rate bases (D-VCG). We further prove population stability under the standard score-entropy training loss, identifying a tilted-path coverage factor that governs robustness to score error, together with finite-particle convergence for a fixed controlled Feynman-Kac recursion. Empirically, FluxLite improves over standard Feynman-Kac SMC baselines by up to two orders of magnitude in terminal KL on an analytically tractable finite-state CTMC benchmark, and reduces row-correlation MSE on 2D Ising sampling by 5-7x in geometric mean and up to 55x at peak.

The recent hardware-accelerated microscaling 4-bit floating-point formats such as MXFP4 and NVFP4, supported on NVIDIA and AMD GPUs, promise to revolutionize large language model (LLM) inference. Yet, their practical benefits remain unproven. We present the first comprehensive study of MXFP4 and NVFP4 for post-training quantization, revealing gaps between their promise and real-world performance. Our analysis shows that state-of-the-art methods struggle with FP4, due to two key issues: (1) NVFP4's small group size provably neutralizes traditional outlier mitigation techniques; (2) MXFP4's power-of-two scale quantization severely degrades accuracy due to high induced error. To bridge this gap, we introduce Micro-Rotated-GPTQ (MR-GPTQ), a variant of the classic GPTQ quantization algorithm that tailors the quantization process to FP4's unique properties, by using block-wise Hadamard transforms and format-specific optimizations. We support our proposal with a set of high-performance GPU kernels that enable the MR-GPTQ format with negligible overhead, by rotation fusion into the weights, and fast online computation of the activations. This leads to speedups vs. FP16 of up to 3.6x layer-wise, and 2.2x end-to-end on NVIDIA B200, and of 6x layer-wise and 4x end-to-end on RTX5090. Our extensive empirical evaluation demonstrates that MR-GPTQ matches or outperforms state-of-the-art accuracy, significantly boosting MXFP4, to the point where it nears that of NVFP4. We conclude that, while FP4 is not an automatic upgrade over INT4, format-specialized methods like MR-GPTQ can unlock a new frontier of accuracy-performance trade-offs.

Training stability remains a central challenge in reinforcement learning (RL) for large language models (LLMs). Policy staleness, asynchronous training, and mismatches between training and inference engines all cause the behavior policy to diverge from the current policy, risking training collapse. Importance sampling provides a principled correction for this distribution shift but suffers from high variance; existing remedies such as token-level clipping and sequence-level normalization lack a unified theoretical foundation. We propose Variational sEquence-level Soft Policy Optimization (VESPO). By incorporating variance reduction into a variational formulation over proposal distributions, VESPO derives a closed-form reshaping kernel that operates directly on sequence-level importance weights without length normalization. Experiments on mathematical reasoning benchmarks show that VESPO maintains stable training under staleness ratios up to 64x and fully asynchronous execution, and delivers consistent gains across both dense and Mixture-of-Experts models. Code is available at https://github.com/FloyedShen/VESPO

Few-shot fine-grained classification and person search appear as distinct tasks and literature has treated them separately. But a closer look unveils important similarities: both tasks target categories that can only be discriminated by specific object details; and the relevant models should generalize to new categories, not seen during training. We propose a novel unified Query-Guided Network (QGN) applicable to both tasks. QGN consists of a Query-guided Siamese-Squeeze-and-Excitation subnetwork which re-weights both the query and gallery features across all network layers, a Query-guided Region Proposal subnetwork for query-specific localisation, and a Query-guided Similarity subnetwork for metric learning. QGN improves on a few recent few-shot fine-grained datasets, outperforming other techniques on CUB by a large margin. QGN also performs competitively on the person search CUHK-SYSU and PRW datasets, where we perform in-depth analysis.

Appropriately designing the proposal kernel of particle filters is an issue of significant importance, since a bad choice may lead to deterioration of the particle sample and, consequently, waste of computational power. In this paper we introduce a novel algorithm adaptively approximating the so-called optimal proposal kernel by a mixture of integrated curved exponential distributions with logistic weights. This family of distributions, referred to as mixtures of experts, is broad enough to be used in the presence of multi-modality or strongly skewed distributions. The mixtures are fitted, via online-EM methods, to the optimal kernel through minimisation of the Kullback-Leibler divergence between the auxiliary target and instrumental distributions of the particle filter. At each iteration of the particle filter, the algorithm is required to solve only a single optimisation problem for the whole particle sample, yielding an algorithm with only linear complexity. In addition, we illustrate in a simulation study how the method can be successfully applied to optimal filtering in nonlinear state-space models.

We consider the training of the first layer of vision models and notice the clear relationship between pixel values and gradient update magnitudes: the gradients arriving at the weights of a first layer are by definition directly proportional to (normalized) input pixel values. Thus, an image with low contrast has a smaller impact on learning than an image with higher contrast, and a very bright or very dark image has a stronger impact on the weights than an image with moderate brightness. In this work, we propose performing gradient descent on the embeddings produced by the first layer of the model. However, switching to discrete inputs with an embedding layer is not a reasonable option for vision models. Thus, we propose the conceptual procedure of (i) a gradient descent step on first layer activations to construct an activation proposal, and (ii) finding the optimal weights of the first layer, i.e., those weights which minimize the squared distance to the activation proposal. We provide a closed form solution of the procedure and adjust it for robust stochastic training while computing everything efficiently. Empirically, we find that TrAct (Training Activations) speeds up training by factors between 1.25x and 4x while requiring only a small computational overhead. We demonstrate the utility of TrAct with different optimizers for a range of different vision models including convolutional and transformer architectures.

We consider multi-draft speculative sampling, where the proposal sequences are sampled independently from different draft models. At each step, a token-level draft selection scheme takes a list of valid tokens as input and produces an output token whose distribution matches that of the target model. Previous works have demonstrated that the optimal scheme (which maximizes the probability of accepting one of the input tokens) can be cast as a solution to a linear program. In this work we show that the optimal scheme can be decomposed into a two-step solution: in the first step an importance sampling (IS) type scheme is used to select one intermediate token; in the second step (single-draft) speculative sampling is applied to generate the output token. For the case of two identical draft models we further 1) establish a necessary and sufficient condition on the distributions of the target and draft models for the acceptance probability to equal one and 2) provide an explicit expression for the optimal acceptance probability. Our theoretical analysis also motives a new class of token-level selection scheme based on weighted importance sampling. Our experimental results demonstrate consistent improvements in the achievable block efficiency and token rates over baseline schemes in a number of scenarios.

A research proposal can describe an established mechanism correctly while claiming to introduce it. We study whether providing the earlier paper corrects such contribution claims. Three controlled experiments compare proposals generated with a contribution-bearing prior and a same-topic control. Providing the prior yields no clear aggregate reduction in unsupported novelty. Human analysis of 175 interpretable exposed proposals finds that 137 recognize the prior's relevance, but 61 correctly attribute the established contribution. Of 71 proposed remaining distinctions, 37 are covered by the same prior. We introduce Research Idea Novelty Inspection (RINI), which audits contribution claims against evidence, checks the remaining distinction, and applies local revisions. Five human annotators evaluate 1,080 original-revision pairs across three methods. On the same 240 originals judged to require correction, successful repair is 11.7% for Self-Revision, 39.1% for Retrieve-and-Revise, and 72.2% for RINI, with research tasks weighted equally. The improvement over same-evidence direct revision is 33.0 percentage points. The revised proposals retain their research questions and technical methods. These results motivate explicit contribution attribution when using literature to generate and revise research proposals.

The exponential growth of knowledge and the increasing complexity of interdisciplinary research pose significant challenges for researchers, including information overload and difficulties in exploring novel ideas. The advancements in large language models (LLMs), such as GPT-4, have shown great potential in enhancing idea proposals, but how to effectively utilize large models for reasonable idea proposal has not been thoroughly explored. This paper proposes a scientific paper idea proposer (SciPIP). Based on a user-provided research background, SciPIP retrieves helpful papers from a literature database while leveraging the capabilities of LLMs to generate more novel and feasible ideas. To this end, 1) we construct a literature retrieval database, extracting lots of papers' multi-dimension information for fast access. Then, a literature retrieval method based on semantics, entity, and citation co-occurrences is proposed to search relevant literature from multiple aspects based on the user-provided background. 2) After literature retrieval, we introduce dual-path idea proposal strategies, where one path infers solutions from the retrieved literature and the other path generates original ideas through model brainstorming. We then combine the two to achieve a good balance between feasibility and originality. Through extensive experiments on the natural language processing (NLP) field, we demonstrate that SciPIP can retrieve citations similar to those of existing top conference papers and generate many ideas consistent with them. Additionally, we evaluate the originality of other ideas generated by SciPIP using large language models, further validating the effectiveness of our proposed method. The code and the database are released at https://github.com/cheerss/SciPIP.

Weight initialization plays an important role in neural network training. Widely used initialization methods are proposed and evaluated for networks that are trained from scratch. However, the growing number of pretrained models now offers new opportunities for tackling this classical problem of weight initialization. In this work, we introduce weight selection, a method for initializing smaller models by selecting a subset of weights from a pretrained larger model. This enables the transfer of knowledge from pretrained weights to smaller models. Our experiments demonstrate that weight selection can significantly enhance the performance of small models and reduce their training time. Notably, it can also be used together with knowledge distillation. Weight selection offers a new approach to leverage the power of pretrained models in resource-constrained settings, and we hope it can be a useful tool for training small models in the large-model era. Code is available at https://github.com/OscarXZQ/weight-selection.

The recommendation system plays a vital role in many areas, especially academic fields, to support researchers in submitting and increasing the acceptance of their work through the conference or journal selection process. This study proposes a transformer-based model using transfer learning as an efficient approach for the paper submission recommendation system. By combining essential information (such as the title, the abstract, and the list of keywords) with the aims and scopes of journals, the model can recommend the Top K journals that maximize the acceptance of the paper. Our model had developed through two states: (i) Fine-tuning the pre-trained language model (LM) with a simple contrastive learning framework. We utilized a simple supervised contrastive objective to fine-tune all parameters, encouraging the LM to learn the document representation effectively. (ii) The fine-tuned LM was then trained on different combinations of the features for the downstream task. This study suggests a more advanced method for enhancing the efficiency of the paper submission recommendation system compared to previous approaches when we respectively achieve 0.5173, 0.8097, 0.8862, 0.9496 for Top 1, 3, 5, and 10 accuracies on the test set for combining the title, abstract, and keywords as input features. Incorporating the journals' aims and scopes, our model shows an exciting result by getting 0.5194, 0.8112, 0.8866, and 0.9496 respective to Top 1, 3, 5, and 10.

Matching submissions with suitable reviewers at scale is a growing challenge for major venues, yet existing approaches either rely on coarse proxy signals that conflate general relatedness with true suitability, or require expensive human annotations that are difficult to scale for training. We propose MERIT, a two-stage framework that bridges this gap by converting criterion-level expertise matching into scalable suitability supervision. In the first stage, we train a reviewer assessor via reinforcement learning to identify the expertise dimensions a paper requires, match them against the reviewer's prior work, and produce a suitability decision, with rewards provided by an LLM judge guided by paper-specific expertise rubrics. In the second stage, we distill the assessor's predictions into an embedding-based retriever for efficient large-scale assignment. Experiments show that our 4B reviewer assessor outperforms larger general-purpose LLMs on suitability classification, and the resulting retriever achieves state-of-the-art performance across LR-Bench and the CMU Gold dataset. Our code is available at https://github.com/Luli3220/MERIT.

Ensuring that online discussions are civil and productive is a major challenge for social media platforms. Such platforms usually rely both on users and on automated detection tools to flag inappropriate arguments of other users, which moderators then review. However, this kind of post-hoc moderation is expensive and time-consuming, and moderators are often overwhelmed by the amount and severity of flagged content. Instead, a promising alternative is to prevent negative behavior during content creation. This paper studies how inappropriate language in arguments can be computationally mitigated. We propose a reinforcement learning-based rewriting approach that balances content preservation and appropriateness based on existing classifiers, prompting an instruction-finetuned large language model (LLM) as our initial policy. Unlike related style transfer tasks, rewriting inappropriate arguments allows deleting and adding content permanently. It is therefore tackled on document level rather than sentence level. We evaluate different weighting schemes for the reward function in both absolute and relative human assessment studies. Systematic experiments on non-parallel data provide evidence that our approach can mitigate the inappropriateness of arguments while largely preserving their content. It significantly outperforms competitive baselines, including few-shot learning, prompting, and humans.

Large language models (LLMs) are increasingly used to assist ideation in research, but evaluating the quality of LLM-generated research proposals remains difficult: novelty and soundness are hard to measure automatically, and large-scale human evaluation is costly. We propose a verifiable alternative by reframing proposal generation as a time-sliced scientific forecasting problem. Given a research question and inspiring papers available before a cutoff time, the model generates a structured proposal and is evaluated by whether it anticipates research directions that appear in papers published after the time. We operationalize this objective with the Future Alignment Score (FAS), computed via retrieval and LLM-based semantic scoring against a held-out future corpus. To train models, we build a time-consistent dataset of 17,771 papers from targets and their pre-cutoff citations, and synthesize reasoning traces that teach gap identification and inspiration borrowing. Across Llama-3.1 and Qwen2.5 models, future-aligned tuning improves future alignment over unaligned baselines (up to +10.6% overall FAS), and domain-expert human evaluation corroborates improved proposal quality. Finally, we demonstrate practical impact by implementing two model-generated proposals with a code agent, obtaining 4.17% accuracy gain on MATH from a new prompting strategy and consistent improvements for a novel model-merging method.

In modern recommendation systems, the standard pipeline involves training machine learning models on historical data to predict user behaviors and improve recommendations continuously. However, these data training loops can introduce interference in A/B tests, where data generated by control and treatment algorithms, potentially with different distributions, are combined. To address these challenges, we introduce a novel approach called weighted training. This approach entails training a model to predict the probability of each data point appearing in either the treatment or control data and subsequently applying weighted losses during model training. We demonstrate that this approach achieves the least variance among all estimators that do not cause shifts in the training distributions. Through simulation studies, we demonstrate the lower bias and variance of our approach compared to other methods.

In ecology, psychometrics, and the analysis of social and financial networks, binary matrices are often analyzed conditional on their observed row and column sums, which restricts the problem to a finite sample space of matrices with the same margins. Two fundamental problems are to count this space and to sample uniformly from it. Sequential importance sampling (SIS) addresses both with independent weighted samples and an unbiased count estimator, but its efficiency depends critically on the proposal distribution. Existing proposals are analytically designed, and their accuracy can vary substantially with the margins. We show that the ideal SIS proposal, under which every weight equals the count and the variance vanishes, is exactly the policy of a generative flow network (GFlowNet) with unit reward on every matrix that has the given margins. We therefore propose MarginFlow, a framework that turns the design of the proposal into a learning problem and amortizes it across margins by exploiting their self-similarity. Every partial matrix is itself an instance with reduced margins, so one set transformer that reads the remaining margins serves every margin. We train MarginFlow on a pool of 1904 margins and evaluate it zero-shot on 1190 held-out margins, synthetic and real, from 3times3 to 870times6. On 1187 of the 1190 margins it matches or beats the best of 31 analytically designed configurations, chosen post hoc for each margin, and its median effective sample fraction is 99.8%. On the 56 margins where that best loses more than one nat of effective sample size, MarginFlow wins every one and raises the median effective sample fraction from 10.3% to 94.1%.

Composition models of distributional semantics are used to construct phrase representations from the representations of their words. Composition models are typically situated on two ends of a spectrum. They either have a small number of parameters but compose all phrases in the same way, or they perform word-specific compositions at the cost of a far larger number of parameters. In this paper we propose transformation weighting (TransWeight), a composition model that consistently outperforms existing models on nominal compounds, adjective-noun phrases and adverb-adjective phrases in English, German and Dutch. TransWeight drastically reduces the number of parameters needed compared to the best model in the literature by composing similar words in the same way.

Relation classification models are conventionally evaluated using only a single measure, e.g., micro-F1, macro-F1 or AUC. In this work, we analyze weighting schemes, such as micro and macro, for imbalanced datasets. We introduce a framework for weighting schemes, where existing schemes are extremes, and two new intermediate schemes. We show that reporting results of different weighting schemes better highlights strengths and weaknesses of a model.

Large language models (LLMs) have shown remarkable capability in numerous tasks and applications. However, fine-tuning LLMs using high-quality datasets under external supervision remains prohibitively expensive. In response, LLM self-improvement approaches have been vibrantly developed recently. The typical paradigm of LLM self-improvement involves training LLM on self-generated data, part of which may be detrimental and should be filtered out due to the unstable data quality. While current works primarily employs filtering strategies based on answer correctness, in this paper, we demonstrate that filtering out correct but with high distribution shift extent (DSE) samples could also benefit the results of self-improvement. Given that the actual sample distribution is usually inaccessible, we propose a new metric called DS weight to approximate DSE, inspired by the Importance Weighting methods. Consequently, we integrate DS weight with self-consistency to comprehensively filter the self-generated samples and fine-tune the language model. Experiments show that with only a tiny valid set (up to 5\% size of the training set) to compute DS weight, our approach can notably promote the reasoning ability of current LLM self-improvement methods. The resulting performance is on par with methods that rely on external supervision from pre-trained reward models.

LLM-as-a-judge panels aggregate votes from multiple models, with the expectation that diverse models yield more reliable evaluations. We develop a framework to measure the true informational value of such panels and quantify how far their reliability falls short of the independent-voting ideal. Testing a panel of 9 frontier LLMs from 7 model families on three natural language inference datasets (each with 100 human annotations per item), we find that the 9 judges effectively provide only about 2 independent votes' worth of information. Roughly three-quarters of the panel's nominal independence is lost because the models make the same mistakes on the same items. The consequences are stark: the panel's actual accuracy falls 8-22 percentage points short of what independent voting would achieve, and the best single judge matches or outperforms the full panel across all conditions. Neither adding more judges nor using smarter aggregation algorithms helps -- established methods close at most 11% of this gap, even with access to the correct answers. We quantify these findings using the Kish effective sample size (n_eff) and a Condorcet null model, and show the deficit is robust across prompt variants, temperatures, chain-of-thought reasoning, and a pairwise preference task (RewardBench). The bottleneck is correlated judges, not the aggregation algorithm, implying that scaling up panels cannot substitute for genuinely independent evaluation.

Evaluating research ideas generated by LLMs is difficult because their scientific value cannot be fully determined by objective criteria, and no single reference answer specifies what counts as a good idea. To address this challenge, we introduce Ideation Arena, a battle style platform that evaluates research ideas through pairwise human assessment. Ideation Arena evaluates ideas generated by 14 frontier LLMs and 5 research agent architectures built on 2 base models. To ensure a common starting point, Ideation Arena builds shared literature contexts from papers familiar to the participating researchers and provides the same contexts to all LLMs and agents. We collect over 6,000 double blind pairwise comparisons from 105 active computer science researchers and construct an Elo rating leaderboard of proposal-stage expert preferences in computer science under a shared closed-context protocol. We validate the rankings through interrater agreement and robustness analyses, showing that the leaderboard remains stable under changes in annotator composition and domain coverage. Our results show substantial variation in agent effectiveness, with some frameworks improving ideation quality over their backbones and others offering little benefit or even underperforming their base models. We further construct Ideation Arena Eval, a benchmark for assessing whether automated evaluators align with human preferences in research ideation. Experiments with current LLM judges show that they still cannot reliably reproduce expert preferences, with the best judge reaching 72.56% Soft Accuracy on Overall Quality. Our code, data, and leaderboards are available at https://github.com/foss12138/Research-Ideation-Arena.

Recent studies have shown that supervised fine-tuning of LLMs on a small number of high-quality datasets can yield strong reasoning capabilities. However, full fine-tuning (Full FT), while powerful, is computationally expensive and susceptible to overfitting and catastrophic forgetting, particularly when data is limited. Sparse fine-tuning, which previously achieved notable success by updating only a small subset of model parameters, offers a promising trade-off between efficiency and effectiveness. Yet, it has lagged behind in the LLM era due to the difficulty of identifying parameters truly critical for reasoning. In this work, we state that weights with the largest magnitude after low-rank approximation are critical weights for fine-tuning, which we call Principal Weights. Surprisingly, while magnitude-based sparse fine-tuning performs poorly as a baseline on LLM fine-tuning, it becomes highly effective after rank reduction. These insights motivate our method: Low-rank Informed Sparse Fine-Tuning (LIFT). LIFT only updates the top 5% Principal Weights throughout training and consistently achieves better performance on reasoning tasks than Full FT, while maintaining memory efficiency on par with popular parameter-efficient fine-tuning methods. In addition to strong performance on target domains such as arithmetic reasoning, LIFT also retains up to 20% more source-domain knowledge, compared to Full FT and LoRA. Our code is available at: https://github.com/zihanghliu/LIFT.

Long-form generation is crucial for academic writing papers and repo-level code generation. Despite this, current models, including GPT-4o, still exhibit unsatisfactory performance. Existing methods that utilize preference learning with outcome supervision often fail to provide detailed feedback for extended contexts. This shortcoming can lead to content that does not fully satisfy query requirements, resulting in issues like length deviations, and diminished quality. In this paper, we propose enhancing long-form generation by incorporating process supervision. We employ Monte Carlo Tree Search to gather stepwise preference pairs, utilizing a global memory pool to maintain consistency. To address the issue of suboptimal candidate selection, we integrate external critiques to refine and improve the quality of the preference pairs. Finally, we apply step-level DPO using the collected stepwise preference pairs. Experimental results show that our method improves length and quality on long-form generation benchmarks, with almost lossless performance on general benchmarks across various model backbones.

Given the rapid ascent of large language models (LLMs), we study the question: (How) can large language models help in reviewing of scientific papers or proposals? We first conduct some pilot studies where we find that (i) GPT-4 outperforms other LLMs (Bard, Vicuna, Koala, Alpaca, LLaMa, Dolly, OpenAssistant, StableLM), and (ii) prompting with a specific question (e.g., to identify errors) outperforms prompting to simply write a review. With these insights, we study the use of LLMs (specifically, GPT-4) for three tasks: 1. Identifying errors: We construct 13 short computer science papers each with a deliberately inserted error, and ask the LLM to check for the correctness of these papers. We observe that the LLM finds errors in 7 of them, spanning both mathematical and conceptual errors. 2. Verifying checklists: We task the LLM to verify 16 closed-ended checklist questions in the respective sections of 15 NeurIPS 2022 papers. We find that across 119 {checklist question, paper} pairs, the LLM had an 86.6% accuracy. 3. Choosing the "better" paper: We generate 10 pairs of abstracts, deliberately designing each pair in such a way that one abstract was clearly superior than the other. The LLM, however, struggled to discern these relatively straightforward distinctions accurately, committing errors in its evaluations for 6 out of the 10 pairs. Based on these experiments, we think that LLMs have a promising use as reviewing assistants for specific reviewing tasks, but not (yet) for complete evaluations of papers or proposals.

Low-Rank Adaptation (LoRA) has achieved remarkable training results by freezing the original weights and training only low-rank matrices, establishing itself as the predominant fine-tuning method for LLMs. In pursuit of performance closer to full-parameter training, a series of LoRA variants have emerged, such as LoRA+, PISSA, Olora, and LoRA-GA. However, these improvements complicate the initial setup of model training and increase initialization time. More importantly, they overlook the internal interactions of the original weight information. To address these issues, we introduce a novel theory, ``Weight Guide'' aimed at continuously guiding trainable matrices through the original weights during training to enhance the utilization of weight information. Based on this theory, we designed a new PEFT technique called Bone (Block Affine), which not only enhances the utilization of original weight information but also emphasizes the internal connections between weights, leading to faster convergence and better data fitting. Experimental comparisons across two different LLM architectures (LLaMA2, RWKV6) and various parameter scales demonstrate that the Bone structure can achieve rapid convergence and superior data fitting without the need for complex initialization. For example, when fine-tuning LLaMA2-7B on the MetaMathQA dataset and validating on GSM8k and math benchmarks, Bone achieved fine-tuning scores of 49.36 and 8.8, respectively, outperforming PISSA by 5.84\% and 1.96\%.

This paper provides an overview of the approach we used as team ISISTANITOS for the ACM RecSys Challenge 2023. The competition was organized by ShareChat, and involved predicting the probability of a user clicking an app ad and/or installing an app, to improve deep funnel optimization and a special focus on user privacy. Our proposed method inferring the probabilities of clicking and installing as two different, but related tasks. Hence, the model engineers a specific set of features for each task and a set of shared features. Our model is called Weighted Multi-Level Feature Factorization because it considers the interaction of different order features, where the order is associated to the depth in a neural network. The prediction for a given task is generated by combining the task specific and shared features on the different levels. Our submission achieved the 11 rank and overall score of 55 in the competition academia-track final results. We release our source code at: https://github.com/knife982000/RecSys2023Challenge

As software projects progress, quality of code assumes paramount importance as it affects reliability, maintainability and security of software. For this reason, static analysis tools are used in developer workflows to flag code quality issues. However, developers need to spend extra efforts to revise their code to improve code quality based on the tool findings. In this work, we investigate the use of (instruction-following) large language models (LLMs) to assist developers in revising code to resolve code quality issues. We present a tool, CORE (short for COde REvisions), architected using a pair of LLMs organized as a duo comprised of a proposer and a ranker. Providers of static analysis tools recommend ways to mitigate the tool warnings and developers follow them to revise their code. The proposer LLM of CORE takes the same set of recommendations and applies them to generate candidate code revisions. The candidates which pass the static quality checks are retained. However, the LLM may introduce subtle, unintended functionality changes which may go un-detected by the static analysis. The ranker LLM evaluates the changes made by the proposer using a rubric that closely follows the acceptance criteria that a developer would enforce. CORE uses the scores assigned by the ranker LLM to rank the candidate revisions before presenting them to the developer. CORE could revise 59.2% Python files (across 52 quality checks) so that they pass scrutiny by both a tool and a human reviewer. The ranker LLM is able to reduce false positives by 25.8% in these cases. CORE produced revisions that passed the static analysis tool in 76.8% Java files (across 10 quality checks) comparable to 78.3% of a specialized program repair tool, with significantly much less engineering efforts.

Learning of preference models from human feedback has been central to recent advances in artificial intelligence. Motivated by the cost of obtaining high-quality human annotations, we study efficient human preference elicitation for learning preference models. The key idea in our work is to generalize optimal designs, an approach to computing optimal information-gathering policies, to lists of items that represent potential questions with answers. The policy is a distribution over the lists and we elicit preferences from them proportionally to their probabilities. To show the generality of our ideas, we study both absolute and ranking feedback models on items in the list. We design efficient algorithms for both and analyze them. Finally, we demonstrate that our algorithms are practical by evaluating them on existing question-answering problems.

Building on our earlier program-evolution workflow guided by large language models (LLMs), we study weight-five bivariate bicycle (BB) and perturbed bivariate bicycle (PBB) codes. The resulting catalogue contains 1,142 distinct code proposals, including 1,081 nonbaseline proposals attributable to LLM-generated programs. Across the catalogue, we certify connected Calderbank--Shor--Steane (CSS) realizations [[96,4,10]], [[140,6,10]], and [[180,4,14]]. A post-search comparison certifies seven imported Lin--Pryadko archive constructions. For leading parameter triples also represented in that archive, we provide exact distance evidence, explicit bivariate presentations, and verified component reductions. A basis-independent connectivity analysis identifies 409 of the 1,142 catalogue entries as disconnected and shows that 73.1\% of the classes with exact distance certificates contain repeated connected components. Algebraic analysis organizes the connected CSS classes into order-3, order-7, and order-15 cyclotomic-kernel strata. The strongest exact connected PBB parameter point is [[216,4,10]], attained by two distinct component classes. Among the 936 distinct CSS proposals from the LLM-guided campaign with a recorded positive distance, 816 (87.18\%) are certified at dgeq5. For comparison, three random-search controls each sample 6,444 CSS code proposals uniformly without replacement, using the same per-lattice and encoded-dimension sample counts as the LLM-guided campaign. In these controls, 4,672--4,785 proposals (72.50--74.26\%) meet the same criterion. The LLM-guided campaign has the higher certified yield, while the random controls cover more connected classes. Together, these results extend LLM-guided discovery to a more constrained code family and provide a reproducible structural and exact-distance account of its strongest candidates.

Language models have been adopted faster than evaluation practices that reliably assess their risks, and a growing share of use is affective rather than informational. Within that traffic users disclose suicide and self-harm (SSH) crises. Existing safety benchmarks score models primarily on refusal, but refusal is not the desired behavior here; the conversation requires a substantive supportive response. We introduce DistressBench, 718 English conversations with clinician-authored user turns spanning 23 SSH subcategories, each paired with a task-specific rubric of weighted atomic criteria across seven dimensions of crisis support and a clinician reference response. A model's score is the weighted average over the criteria its reply satisfies, reading directly as the fraction of required care delivered. The best of 25 frontier models satisfies 88.4% of weighted criteria and the median model 71.4%, against 98.7% for clinician references scored on the same criteria. Pooled across all 25 models, in 35.3% of conversations where a model satisfied every criterion for recognizing the crisis, it failed to route the user toward human help. The shortfall concentrates in the dimensions requiring the model to act rather than withhold. Contrasting each dimension's median model against its best separates capability limits from choices: de-escalation reaches 74.6% in the strongest model against a median of 46.0%, and safety disclaimers 84.6% against 8.3%. Multi-turn conversations score below single-turn ones (68.5% against 74.2%). We release the corpus, rubrics, judge calibration labels, and a companion annex of 20 long-horizon red-team transcripts. These results argue for evaluating crisis safety on the care a model delivers rather than on what it declines to say, and for treating de-escalation and resource routing as deployment requirements.

Boolean query construction is often critical for medical systematic review literature search. To create an effective Boolean query, systematic review researchers typically spend weeks coming up with effective query terms and combinations. One challenge to creating an effective systematic review Boolean query is the selection of effective MeSH Terms to include in the query. In our previous work, we created neural MeSH term suggestion methods and compared them to state-of-the-art MeSH term suggestion methods. We found neural MeSH term suggestion methods to be highly effective. In this demonstration, we build upon our previous work by creating (1) a Web-based MeSH term suggestion prototype system that allows users to obtain suggestions from a number of underlying methods and (2) a Python library that implements ours and others' MeSH term suggestion methods and that is aimed at researchers who want to further investigate, create or deploy such type of methods. We describe the architecture of the web-based system and how to use it for the MeSH term suggestion task. For the Python library, we describe how the library can be used for advancing further research and experimentation, and we validate the results of the methods contained in the library on standard datasets. Our web-based prototype system is available at http://ielab-mesh-suggest.uqcloud.net, while our Python library is at https://github.com/ielab/meshsuggestlib.

Good weight initialization serves as an effective measure to reduce the training cost of a deep neural network (DNN) model. The choice of how to initialize parameters is challenging and may require manual tuning, which can be time-consuming and prone to human error. To overcome such limitations, this work takes a novel step towards building a weight generator to synthesize the neural weights for initialization. We use the image-to-image translation task with generative adversarial networks (GANs) as an example due to the ease of collecting model weights spanning a wide range. Specifically, we first collect a dataset with various image editing concepts and their corresponding trained weights, which are later used for the training of the weight generator. To address the different characteristics among layers and the substantial number of weights to be predicted, we divide the weights into equal-sized blocks and assign each block an index. Subsequently, a diffusion model is trained with such a dataset using both text conditions of the concept and the block indexes. By initializing the image translation model with the denoised weights predicted by our diffusion model, the training requires only 43.3 seconds. Compared to training from scratch (i.e., Pix2pix), we achieve a 15x training time acceleration for a new concept while obtaining even better image generation quality.

Given that conventional recommenders, while deeply effective, rely on large distributed systems pre-trained on aggregate user data, incorporating new data necessitates large training cycles, making them slow to adapt to real-time user feedback and often lacking transparency in recommendation rationale. We explore the performance of smaller personal models trained on per-user data using weightless neural networks (WNNs), an alternative to neural backpropagation that enable continuous learning by using neural networks as a state machine rather than a system with pretrained weights. We contrast our approach against a classic weighted system, also on a per-user level, and standard collaborative filtering, achieving competitive levels of accuracy on a subset of the MovieLens dataset. We close with a discussion of how weightless systems can be developed to augment centralized systems to achieve higher subjective accuracy through recommenders more directly tunable by end-users.

A recommendation request on Reddit draws several replies, each naming different titles. When an LLM recommender is trained on such threads with reinforcement learning (RL), which replies should a generated list be rewarded against? The state-of-the-art recipe, Rank-GRPO, picks one reply per training example, so the advantage mostly records which reply was drawn (85% of its variance) rather than how good the list is. We argue that RL should train on the request, not on each answer, and propose ReMaRk: it scores every list once against the union of all replies' titles and samples each request equally. This makes RL cheaper. On seven backbones and three datasets, ReMaRk reaches the validation recall of 2,000 per-reply RL steps in 25 to 53% of the steps and leads at that budget; trained until neither improves, it is never significantly behind Rank-GRPO and in four of seven pairs reaches Rank-GRPO's best with fewer GPU-hours. The same reward helps on ProtoQA, where about 100 people answer each question, which points to a simple rule for RL with several valid human answers: reward them jointly.

The automation of scientific discovery has been a long-standing goal within the research community, driven by the potential to accelerate knowledge creation. While significant progress has been made using commercial large language models (LLMs) as research assistants or idea generators, the possibility of automating the entire research process with open-source LLMs remains largely unexplored. This paper explores the feasibility of using open-source post-trained LLMs as autonomous agents capable of performing the full cycle of automated research and review, from literature review and manuscript preparation to peer review and paper revision. Our iterative preference training framework consists of CycleResearcher, which conducts research tasks, and CycleReviewer, which simulates the peer review process, providing iterative feedback via reinforcement learning. To train these models, we develop two new datasets, Review-5k and Research-14k, reflecting real-world machine learning research and peer review dynamics. Our results demonstrate that CycleReviewer achieves a 26.89\% improvement in mean absolute error (MAE) over individual human reviewers in predicting paper scores, indicating that LLMs can surpass expert-level performance in research evaluation. In research, the papers generated by the CycleResearcher model achieved a score of 5.36 in simulated peer reviews, surpassing the preprint level of 5.24 from human experts and approaching the accepted paper level of 5.69. This work represents a significant step toward fully automated scientific inquiry, providing ethical safeguards and advancing AI-driven research capabilities. The code, dataset and model weight are released at http://github/minjun-zhu/Researcher.

Generative models, with their success in image and video generation, have recently been explored for synthesizing effective neural network weights. These approaches take trained neural network checkpoints as training data, and aim to generate high-performing neural network weights during inference. In this work, we examine four representative methods on their ability to generate novel model weights, i.e., weights that are different from the checkpoints seen during training. Surprisingly, we find that these methods synthesize weights largely by memorization: they produce either replicas, or at best simple interpolations, of the training checkpoints. Current methods fail to outperform simple baselines, such as adding noise to the weights or taking a simple weight ensemble, in obtaining different and simultaneously high-performing models. We further show that this memorization cannot be effectively mitigated by modifying modeling factors commonly associated with memorization in image diffusion models, or applying data augmentations. Our findings provide a realistic assessment of what types of data current generative models can model, and highlight the need for more careful evaluation of generative models in new domains. Our code is available at https://github.com/boyazeng/weight_memorization.

Many LLM-based open-ended search systems freeze the foundation model that proposes improvements to existing solutions, which may bottleneck long-run progress. Recent work has explored updating the proposal model at test time [arXiv:2511.23473], but the update strategy is still typically hand-specified. Therefore, this study investigated whether an LLM can use task feedback to decide how it should update its weights. For tractability, we focused on the simpler case where there is only one round of self-improvement, and restricted the update operator to self-supervised next token prediction (NTP), leaving the model freedom in choosing its training data and key NTP hyperparameters. Using the Self-Adapting Language Models (SEAL) [arXiv:2506.10943] framework as a testbed, we relaxed its fixed human template constraint and allowed the model to generate its own self-edit templates, thereby giving it more control over its training data and hyperparameters. Two variants were studied, differing in whether template generation was conditioned on a lightweight archive of past templates. In SEAL's Single-Passage Knowledge Incorporation setting with Qwen3-8B on SQuAD [arXiv:1606.05250], the no-archive variant performed comparably to the weaker "Implications" baseline, while the archive variant outperformed "Implications" and approached the strongest human-designed "Rewrite" baseline without surpassing it. Further analysis of collapse in the model's exploration revealed that a naive archive can confer some short-term robustness but can also accelerate homogenization, suggesting that explicit novelty pressure may be required to consistently advance beyond carefully optimized human strategies. Our code is available at https://github.com/cheongalc/search-self-edit-strategies .

Classifier-Free Guidance (CFG) enhances the quality and condition adherence of text-to-image diffusion models. It operates by combining the conditional and unconditional predictions using a fixed weight. However, recent works vary the weights throughout the diffusion process, reporting superior results but without providing any rationale or analysis. By conducting comprehensive experiments, this paper provides insights into CFG weight schedulers. Our findings suggest that simple, monotonically increasing weight schedulers consistently lead to improved performances, requiring merely a single line of code. In addition, more complex parametrized schedulers can be optimized for further improvement, but do not generalize across different models and tasks.

Large Language Models (LLMs) suffer from huge number of parameters, which restricts their deployment on edge devices. Weight sharing is one promising solution that encourages weight reuse, effectively reducing memory usage with less performance drop. However, current weight sharing techniques primarily focus on small-scale models like BERT and employ coarse-grained sharing rules, e.g., layer-wise. This becomes limiting given the prevalence of LLMs and sharing an entire layer or block obviously diminishes the flexibility of weight sharing. In this paper, we present a perspective on $textbf{head-wise shareable attention for large language models}. We further propose two memory-efficient methods that share parameters across attention heads, with a specific focus on LLMs. Both of them use the same dynamic strategy to select the shared weight matrices. The first method directly reuses the pre-trained weights without retraining, denoted as DirectShare. The second method first post-trains with constraint on weight matrix similarity and then shares, denoted as PostShare$. Experimental results reveal our head-wise shared models still maintain satisfactory capabilities, demonstrating the feasibility of fine-grained weight sharing applied to LLMs.

System one models enable direct, low-latency decision-making. Yet recent practice of predicting an answer from serialized text does not, by itself, respect the structure of a decision problem. We argue that current designs underemphasize four important structural requirements. (i) null-aware: Models should distinguish answer absence from uncertainty among candidates; (ii) permutation-invariant: Reordering alternatives should not change the decision; (iii) option-scalable: Growing candidate sets should not require redefining the output space; (iv) cacheable: Request-independent computation over recurring alternatives should be reusable across requests. We introduce Jeva, a decision-native architecture that addresses these requirements jointly. A shared encoder independently represents the request and each option, while a compact decision stack refines only the request state against immutable option memory. Symmetric aggregation yields permutation-equivariant probabilities; shared scoring accommodates variable-size candidate sets. A separate coverage estimate distinguishes answer absence from candidate competition, enabling explicit null outcomes. Request-independent option representations and layer projections support reuse across newly assembled sets. These mechanisms unify Choice, Noul, and Score outputs. Across evaluations, Jeva combines strong typed-decision performance with near-perfect null detection and no decision flips under any tested permutations. It scales to thousands of candidates and substantially reduces latency through cross-request reuse without changing decisions.

The evaluation of recommender system fairness has become increasingly important, especially with recent legislation that emphasises the development of fair and responsible artificial intelligence. This has led to the emergence of various fairness evaluation measures, which quantify fairness based on different definitions. However, many of such measures are simply proposed and used without further analysis on their robustness. As a result, there is insufficient understanding and awareness of the measures' limitations. Among other issues, it is not known what kind of model outputs produce the (un)fairest score, how the measure scores are empirically distributed, and whether there are cases where the measures cannot be computed (e.g., due to division by zero). These issues cause difficulty in interpreting the measure scores and confusion on which measure(s) should be used for a specific case. This thesis presents a series of papers that assess and overcome various theoretical, empirical, and conceptual limitations of existing recommender system fairness evaluation measures. We investigate a wide range of offline evaluation measures for different fairness notions, divided based on the evaluation subjects (users and items) and for different evaluation granularities (groups of subjects and individual subjects). Firstly, we perform theoretical and empirical analysis on the measures, exposing flaws that limit their interpretability, expressiveness, or applicability. Secondly, we contribute novel evaluation approaches and measures that overcome these limitations. Finally, considering the measures' limitations, we recommend guidelines for the appropriate measure usage, thereby allowing for more precise selection of fairness evaluation measures in practical scenarios. Overall, this thesis contributes to advancing the state-of-the-art offline evaluation of fairness in recommender systems.

LLMs are increasingly used to brainstorm research ideas, but existing evaluations mostly judge individual ideas by novelty, feasibility, or expert preference. We instead ask: how far are current LLM-generated ideas from human researchers? To characterize this gap, we build a large-scale evaluation framework for ideation from high-quality human research papers. For each paper, we reverse-engineer a small set of closely related prior works that likely inspired its core idea. LLMs are then prompted to generate a new idea from the set of paper titles and summaries. We introduce a two-axis research-taste taxonomy to profile each idea by its opportunity pattern and research paradigm, and use it to quantify the divergence between human and LLM ideas. Across idea sets generated by different LLMs, we observe a consistent distributional gap: LLM ideas are disproportionately concentrated around bridge-like opportunities and synthesis methods, whereas the human paper reference distribution spreads more broadly across ways of framing gaps and constructing contributions. This result suggests that strong LLMs can produce a range of reasonable ideas, but that range remains narrower than, and systematically shifted relative to, human research taste.

Large Language Models (LLMs) have shown promise in accelerating the scientific research pipeline. A key capability for this process is the ability to generate novel research ideas, and prior studies have found settings in which LLM-generated research ideas were judged as more novel than human-expert ideas. However, a good idea should not simply appear to be novel, it should also result in better research after being executed. To test whether AI-generated ideas lead to better research outcomes, we conduct an execution study by recruiting 43 expert researchers to execute randomly-assigned ideas, either written by experts or generated by an LLM. Each expert spent over 100 hours implementing the idea and wrote a 4-page short paper to document the experiments. All the executed projects are then reviewed blindly by expert NLP researchers. Comparing the review scores of the same ideas before and after execution, the scores of the LLM-generated ideas decrease significantly more than expert-written ideas on all evaluation metrics (novelty, excitement, effectiveness, and overall; p < 0.05), closing the gap between LLM and human ideas observed at the ideation stage. When comparing the aggregated review scores from the execution study, we even observe that for many metrics there is a flip in rankings where human ideas score higher than LLM ideas. This ideation-execution gap highlights the limitations of current LLMs in generating truly effective research ideas and the challenge of evaluating research ideas in the absence of execution outcomes.

Diffusion models have consistently driven progress in text-to-image generation. However, it is challenging to attribute recent progress to specific modeling and data choices: state-of-the-art open-weight models provide limited ablations, and do not disclose their training data and full training details. The research community needs fully open (weights, data, and code) models as a foundation for further research; yet existing fully open models still fall significantly short of leading models in performance. In this project, we conduct a systematic investigation of the modeling and data design choices in text-to-image diffusion training and inference with 300+ controlled experiments totaling 700K+ TPU v6e hours. Our experiments highlight several empirical findings (e.g., equal weighting is a strong default for mixing curated datasets) and simple design decisions (e.g., larger text encoder adapters improve performance with minimal added parameters) for training strong models. Guided by these insights, we train i1, a 3B-parameter text-to-image diffusion model using only publicly available datasets. i1 is competitive with leading models on five representative benchmarks (GenEval, DPG, PRISM, CVTG-2K, and LongText), and outperforms the best existing fully open model by 29.5 absolute percentage points on average. We provide the i1 checkpoints, training and inference code, and the data processing pipeline. Together, our findings and the i1 recipe establish a practical foundation for future open research in text-to-image diffusion models. Our code is available at https://github.com/zlab-princeton/i1.

The past two decades have witnessed the rapid development of personalized recommendation techniques. Despite significant progress made in both research and practice of recommender systems, to date, there is a lack of a widely-recognized benchmarking standard in this field. Many existing studies perform model evaluations and comparisons in an ad-hoc manner, for example, by employing their own private data splits or using different experimental settings. Such conventions not only increase the difficulty in reproducing existing studies, but also lead to inconsistent experimental results among them. This largely limits the credibility and practical value of research results in this field. To tackle these issues, we present an initiative project (namely BARS) aiming for open benchmarking for recommender systems. In comparison to some earlier attempts towards this goal, we take a further step by setting up a standardized benchmarking pipeline for reproducible research, which integrates all the details about datasets, source code, hyper-parameter settings, running logs, and evaluation results. The benchmark is designed with comprehensiveness and sustainability in mind. It covers both matching and ranking tasks, and also enables researchers to easily follow and contribute to the research in this field. This project will not only reduce the redundant efforts of researchers to re-implement or re-run existing baselines, but also drive more solid and reproducible research on recommender systems. We would like to call upon everyone to use the BARS benchmark for future evaluation, and contribute to the project through the portal at: https://openbenchmark.github.io/BARS.

Direct-decision models turn text into low-latency structured labels and scores, making them attractive for classification and automatic evaluation. Yet reliability requires more than accuracy: a model must also use the ordinal decision scale supplied by the user faithfully. We analyze JEV~1.13 and three open KEV models. Our investigation begins with ANLI, where JEV assigns 38.8\% of all predictions and 51.3\% of errors to Neutral despite 74.95\% accuracy, nearly balanced gold labels, and balanced candidate positions. Across 36 ordinal datasets, final decisions use only 67--76\% of the effective gold support, versus 87--102\% on four nominal tasks. Randomizing candidate order weakens but does not remove this compression. Holding items and source scores fixed while balancing gold support and positions, we refine scales from K=2 to 14; utilization falls for every model and reaches 26--75\% at K=14, although candidate probabilities remain broad for most models. Targeted BA-LoRA post-training raises gold-relative utilization from roughly 47\% to 86\% on eight supervised scales at both KEV sizes, showing that the compression is learned and modifiable rather than an immutable architectural limit. We call this ordinal scale-utilization bias: decision-stage candidate-space compression distinct from accuracy, gold imbalance, fixed position, and candidate count alone. The code and data are available at https://github.com/Glax147/jev_ordinal_scale_bia

Weight sharing promises to make neural architecture search (NAS) tractable even on commodity hardware. Existing methods in this space rely on a diverse set of heuristics to design and train the shared-weight backbone network, a.k.a. the super-net. Since heuristics and hyperparameters substantially vary across different methods, a fair comparison between them can only be achieved by systematically analyzing the influence of these factors. In this paper, we therefore provide a systematic evaluation of the heuristics and hyperparameters that are frequently employed by weight-sharing NAS algorithms. Our analysis uncovers that some commonly-used heuristics for super-net training negatively impact the correlation between super-net and stand-alone performance, and evidences the strong influence of certain hyperparameters and architectural choices. Our code and experiments set a strong and reproducible baseline that future works can build on.

This paper introduces an efficient fine-tuning method for large pre-trained models, offering strong in-distribution (ID) and out-of-distribution (OOD) performance. Breaking away from traditional practices that need a multitude of fine-tuned models for averaging, our approach employs significantly fewer models to achieve final weights yet yield superior accuracy. Drawing from key insights in the weight space of fine-tuned weights, we uncover a strong link between the performance and proximity to the center of weight space. Based on this, we introduce a method that approximates a center-close weight using only two fine-tuned models, applicable during or after training. Our innovative layer-wise weight averaging technique surpasses state-of-the-art model methods such as Model Soup, utilizing only two fine-tuned models. This strategy can be aptly coined Model Stock, highlighting its reliance on selecting a minimal number of models to draw a more optimized-averaged model. We demonstrate the efficacy of Model Stock with fine-tuned models based upon pre-trained CLIP architectures, achieving remarkable performance on both ID and OOD tasks on the standard benchmarks, all while barely bringing extra computational demands. Our code and pre-trained models are available at https://github.com/naver-ai/model-stock.

In this report we describe the development of Command A, a powerful large language model purpose-built to excel at real-world enterprise use cases. Command A is an agent-optimised and multilingual-capable model, with support for 23 languages of global business, and a novel hybrid architecture balancing efficiency with top of the range performance. It offers best-in-class Retrieval Augmented Generation (RAG) capabilities with grounding and tool use to automate sophisticated business processes. These abilities are achieved through a decentralised training approach, including self-refinement algorithms and model merging techniques. We also include results for Command R7B which shares capability and architectural similarities to Command A. Weights for both models have been released for research purposes. This technical report details our original training pipeline and presents an extensive evaluation of our models across a suite of enterprise-relevant tasks and public benchmarks, demonstrating excellent performance and efficiency.

We evaluate language models' capability to generate novel research ideas through the lens of compression. We aim to lower-bound the potentially tiny probability that a language model generates the essence of a future research idea without any hints. Rather than estimate this probability through expensive repeated sampling, our Priced Guidance framework measures the compression cost: how many additional bits of information are needed to guide the model to recover the target idea. We prove that if the model can recover the target idea with at most K bits of guidance in expectation, then it can generate the idea without any guidance with probability at least 2^{-K}. In our framework, the language model, called the generator, can pose a sequence of multiple-choice questions and specify a probability distribution over possible answers. A guide, which is a language model with access to the target idea, selects answers. If a selected answer has prior probability p, the generator pays -log_2 p bits. The generator aims to produce an idea that matches the essence of the target idea with minimal cumulative cost. This cumulative cost equals, up to an additive constant, the number of bits of information sent by the guide. Using this methodology, we evaluate five generator LLMs (Opus 5, Fable 5.1, GPT-6 Astra, GPT-5.6 Sol, and GLM 5.3) on the core ideas in 87 recent high-quality deep learning papers and we use LLM as judge to determine whether the generated idea matches the target in terms of the central research object and defining mechanism. Fable 5.1 achieves the lowest median compression cost at 69.9 bits, substantially lower than gzip's median of 5,712 bits for losslessly compressing the summary of the target idea. A uniform ensemble of Fable 5.1, Opus 5, and Astra further reduces the median compression cost to 55.8 bits and improves the generation probability lower bound by 18,000 times.

Many recent improvements in NLP stem from the development and use of large pre-trained language models (PLMs) with billions of parameters. Large model sizes makes computational cost one of the main limiting factors for training and evaluating such models; and has raised severe concerns about the sustainability, reproducibility, and inclusiveness for researching PLMs. These concerns are often based on personal experiences and observations. However, there had not been any large-scale surveys that investigate them. In this work, we provide a first attempt to quantify these concerns regarding three topics, namely, environmental impact, equity, and impact on peer reviewing. By conducting a survey with 312 participants from the NLP community, we capture existing (dis)parities between different and within groups with respect to seniority, academia, and industry; and their impact on the peer reviewing process. For each topic, we provide an analysis and devise recommendations to mitigate found disparities, some of which already successfully implemented. Finally, we discuss additional concerns raised by many participants in free-text responses.

Self-improving LLM systems propose changes to themselves and keep those that score better on a small evaluation set. We treat this keep-if-better step as selection under measurement noise, model the correlated errors of the candidates in a single decision, and study empirically what happens when the evaluation set is reused. In runs where Qwen models rewrite their own instructions and every candidate is also scored on 600 held-out items, most proposals after the first are harmful, and the model gives the size of the winner's curse of a generation's best candidate. With a prior from a separate pilot, it matches the average overstatement of first-generation commits in native loops, though not setting by setting. In a pre-registered study, the final selection-set score of greedy loops exceeded held-out accuracy by 13 to 20 points with 16 selection items and by 1 to 5 points with 256. Held-out gains grew with the selection set on TREC but not on GSM8K, and the tested acceptance rules did not beat greedy acceptance over whole runs. Gains measured on the selection set also exceeded held-out gains when a current model refined a competent instruction, and in the validation scores of GEPA and MIPROv2. Scoring the starting and the current instruction on 64 items never used for selection removes the average bias of a loop's reported gain, but single estimates remain off by about 6 points. Self-improvement studies should report held-out gains with their uncertainty.

Speculative decoding accelerates LLM inference by having a small drafter propose tokens that a larger target model verifies in parallel. Recent diffusion-based parallel drafters such as DFlash predict the full B-token block in one forward pass, enabling deeper drafters and longer accepted blocks. However, existing multi-token drafter objectives often use fixed position-dependent weighting schedules, such as head-dependent weights or block-position decays, which do not adapt as the positions limiting acceptance change during training. To address this, we derive per-position training weights from a differentiable surrogate of expected accepted draft length, matching the weight of each position to its log-probability gradient contribution. The resulting loss, D-PACE (Dynamic Position-Aware Cross-Entropy), shifts training signal toward positions that currently limit acceptance as the drafter improves. Across six benchmarks, two Qwen3-4B draft depths, two decoding temperatures, and two additional target models, D-PACE consistently improves both wall-clock speedup and average emitted length, with 2.3\% measured training-time overhead and no changes to the drafter architecture or inference procedure.

Hybrid reasoning models can answer directly or spend extra tokens on extended thinking. A practical router should choose between these modes for each query, so easy problems avoid unnecessary reasoning and hard problems receive enough budget to finish the answer. Existing routers move in this direction, but they typically require labeled training data or fix thinking budgets up front, ignoring answer-level evidence from the model itself. We introduce DART, a training-free routing framework that samples two cheap no-think drafts, accepts direct answering when the drafts agree, and predicts a thinking budget from draft entropy when they disagree. Across the main comparisons, DART preserves or improves always-thinking accuracy in most settings while reducing thinking-token use. Accuracy improves by up to +9.0 points on Olympiad-level math and by up to +22.5 points on code under execution-based equivalence, while thinking-token use drops by 32-73%. The Stage~1 signal extends across model scales (0.6B--32B), model families, and API-only hosted settings, with no labeled data and no gradient updates required. Our code is available at https://github.com/js-lee-AI/DART.

Generations from large language models often fail to conform to desired constraints such as JSON schema. Existing locally constrained decoding (LCD) approaches enforce constraints by myopically masking out next tokens, resulting in biased sampling and degradation in performance. Recent work uses sequential Monte Carlo (SMC) methods to mitigate such biases, but designing effective proposal distributions or potential functions remains a key challenge. In this work, we propose a generic approach to construct proposals and potentials for SMC sampling from p_{lm}( cdot mid constraint). First, we show that constraints specified as finite automata can be tensorized for efficient execution on GPUs, which we use to construct globally constrained decoding (GCD) proposals. In addition, leveraging the fact that tensorized finite automata share the same circuit structure as hidden Markov models, we circuit-multiply them to obtain the probabilistic GCD (P-GCD) proposals encoding both logical and probabilistic information about the target distributions. We evaluate (P-)GCD on the tasks of function calling, keyword-based generation, and SQL generation. Experiments show that under the same SMC sampling setup, compared to LCD proposals, (P-)GCD converges faster to the target distribution with significantly fewer particles.

LLM inference often generates a batch of candidates for a prompt and selects one via strategies like majority voting or Best-of- N (BoN). For difficult tasks, this single-shot selection often underperforms. Consequently, evaluations commonly report Pass@k: the agent may submit up to k responses, and only the best of them is used when computing regret. Motivated by this, we study inference scaling in the more general Pass@k inference setting, and prove that neither majority voting nor BoN exhibits the desirable scaling with k and the sampling budget N. Combining the advantages of majority voting and BoN, we propose a new inference strategy called Best-of-Majority (BoM), with a pivotal step that restricts the candidates to the responses with high frequency in the N samples before selecting the top-k rewards. We prove that when the sampling budget is N=tildeOmega(C^*), the regret of BoM is O(epsilon_{opt}+epsilon_{mathrm{RM}^2C^*/k}), where C^* is the coverage coefficient, epsilon_{RM} is the estimation error of the reward model, and epsilon_{opt} is the estimation error of reward at the optimal response. We further establish a matching lower bound, certifying that our algorithm is minimax optimal. Beyond optimality, BoM has a key advantage: unlike majority voting and BoN, its performance does not degrade when increasing N. Experimental results of inference on math problems show BoM outperforming both majority voting and BoN.

Fine-tuning a large language model on new data degrades what it previously learned. We present Omega-S, a drop-in penalty computed from the weight matrix alone: it needs no previous-task data, no Fisher matrix and no stored copy of the old weights. It is three lines in an existing training loop and adds under 4% to the cost of a step. Retention. On Llama-3-8B with LoRA, fine-tuned from code to prose and measured by HumanEval over ten seeds, Omega-S retains more of the original capability than no regularisation on 9 of 10 seeds (0.173 -> 0.238 absolute pass@1; sign test one-sided p=0.011, Wilcoxon p=0.006), as a retention ratio, 62.9% -> 84.1%. It also beats tuned weight decay on 10 of 10 seeds (p=0.002) and tuned EWC on 8 of 10 (p=0.014), every arm re-measured in the same session. Mechanism, measured rather than asserted. Omega-S is topological by construction, its objective built from Tr(A^3), but we measured which of its four factors actually moves and three do not: their elasticity with respect to the weights is at or below 1e-4, against 9e-3 for the degree-variance term. As implemented, the composite reduces to a penalty on the variance of node degrees, which means row magnitude in square modules and directional alignment in non-square ones. We report this because a method whose name promises one thing and whose gradient does another should say so. We also enumerate the open design choices, including a contrast-preserving construction that does what it was designed to do and makes retention worse on all ten seeds. Repeating an identical configuration, same seed and same hardware, gives a standard deviation of 0.104 in retention ratio. We have not found this quantified for low-rank fine-tuning of language models, and it bounds every seed-paired comparison in this literature, ours included. Code, per-seed results and the full record of negative results are available.

Machine learning currently exerts an outsized influence on the world, increasingly affecting institutional practices and impacted communities. It is therefore critical that we question vague conceptions of the field as value-neutral or universally beneficial, and investigate what specific values the field is advancing. In this paper, we first introduce a method and annotation scheme for studying the values encoded in documents such as research papers. Applying the scheme, we analyze 100 highly cited machine learning papers published at premier machine learning conferences, ICML and NeurIPS. We annotate key features of papers which reveal their values: their justification for their choice of project, which attributes of their project they uplift, their consideration of potential negative consequences, and their institutional affiliations and funding sources. We find that few of the papers justify how their project connects to a societal need (15\%) and far fewer discuss negative potential (1\%). Through line-by-line content analysis, we identify 59 values that are uplifted in ML research, and, of these, we find that the papers most frequently justify and assess themselves based on Performance, Generalization, Quantitative evidence, Efficiency, Building on past work, and Novelty. We present extensive textual evidence and identify key themes in the definitions and operationalization of these values. Notably, we find systematic textual evidence that these top values are being defined and applied with assumptions and implications generally supporting the centralization of power.Finally, we find increasingly close ties between these highly cited papers and tech companies and elite universities.

In this paper, we propose a simple and efficient method for value model training on long-context reasoning traces. Compared to existing process reward models (PRMs), our method does not require a fine-grained notion of "step," which is difficult to define for long-context reasoning models. By collecting a dataset of 2.5 million reasoning traces, we train a 1.5B token-level value model and apply it to DeepSeek models for improved performance with test-time compute scaling. We find that block-wise value-guided search (VGS) with a final weighted majority vote achieves better test-time scaling than standard methods such as majority voting or best-of-n. With an inference budget of 64 generations, VGS with DeepSeek-R1-Distill-1.5B achieves an average accuracy of 45.7% across four competition math benchmarks (AIME 2024 & 2025, HMMT Feb 2024 & 2025), reaching parity with o3-mini-medium. Moreover, VGS significantly reduces the inference FLOPs required to achieve the same performance of majority voting. Our dataset, model and codebase are open-sourced.

Geospatial foundation models (GFMs) have been proposed as generalizable backbones for disaster response, land-cover mapping, food-security monitoring, and other high-stakes Earth-observation tasks. Yet the published work about these models does not give reviewers or users enough information to tell which model fits a given task. We argue that nobody knows what the current state of the art is in geospatial foundation models. The methods may be useful, but the GFM literature does not standardize evaluations, training and testing protocols, released weights, or pretraining controls well enough for anyone to compare or rank them. In a 152-paper audit, we find 46 cross-paper disagreements of at least 10 points for the same model, benchmark, and protocol; 94/126 papers with extractable pretraining data use a configuration no other paper uses; and 39% of GFM papers release no model weights. This lack of community standards can be solved. We propose six concrete expectations: named-license weight release, shared core evaluations, copied-versus-rerun baseline annotations, variance reporting, one shared evaluation harness, and data-vs-architecture-vs-algorithm controls. These gaps are a coordination failure, not a fault of any individual lab; the authors of this paper, like many others in the GFM community, have contributed to them. Rather than just critiquing the community, we aim to provide concrete steps toward a shared understanding of how to innovate GFMs.

The rapid adoption of Large Language Models (LLMs) has spurred interest in automated peer review; however, progress is currently stifled by benchmarks that treat reviewing primarily as a rating prediction task. We argue that the utility of a review lies in its textual justification--its arguments, questions, and critique--rather than a scalar score. To address this, we introduce Beyond Rating, a holistic evaluation framework that assesses AI reviewers across five dimensions: Content Faithfulness, Argumentative Alignment, Focus Consistency, Question Constructiveness, and AI-Likelihood. Notably, we propose a Max-Recall strategy to accommodate valid expert disagreement and introduce a curated dataset of paper with high-confidence reviews, rigorously filtered to remove procedural noise. Extensive experiments demonstrate that while traditional n-gram metrics fail to reflect human preferences, our proposed text-centric metrics--particularly the recall of weakness arguments--correlate strongly with rating accuracy. These findings establish that aligning AI critique focus with human experts is a prerequisite for reliable automated scoring, offering a robust standard for future research.

The pre-training cost of large language models (LLMs) is prohibitive. One cutting-edge approach to reduce the cost is zero-shot weight transfer, also known as model growth for some cases, which magically transfers the weights trained in a small model to a large model. However, there are still some theoretical mysteries behind the weight transfer. In this paper, inspired by prior applications of mean field theory to neural network dynamics, we introduce a mean field ansatz to provide a theoretical explanation for weight transfer. Specifically, we propose the row-column (RC) ansatz under the mean field point of view, which describes the measure structure of the weights in the neural network (NN) and admits a close measure dynamic. Thus, the weights of different sizes NN admit a common distribution under proper assumptions, and weight transfer methods can be viewed as sampling methods. We empirically validate the RC ansatz by exploring simple MLP examples and LLMs such as GPT-3 and Llama-3.1. We show the mean-field point of view is adequate under suitable assumptions which can provide theoretical support for zero-shot weight transfer.

For learning with noisy labels, the transition matrix, which explicitly models the relation between noisy label distribution and clean label distribution, has been utilized to achieve the statistical consistency of either the classifier or the risk. Previous researches have focused more on how to estimate this transition matrix well, rather than how to utilize it. We propose good utilization of the transition matrix is crucial and suggest a new utilization method based on resampling, coined RENT. Specifically, we first demonstrate current utilizations can have potential limitations for implementation. As an extension to Reweighting, we suggest the Dirichlet distribution-based per-sample Weight Sampling (DWS) framework, and compare reweighting and resampling under DWS framework. With the analyses from DWS, we propose RENT, a REsampling method with Noise Transition matrix. Empirically, RENT consistently outperforms existing transition matrix utilization methods, which includes reweighting, on various benchmark datasets. Our code is available at https://github.com/BaeHeeSun/RENT.

Controlling the syntactic structure of text generated by language models is valuable for applications requiring clarity, stylistic consistency, or interpretability, yet it remains a challenging task. In this paper, we argue that sampling algorithms based on the posterior inference can effectively enforce a target constituency structure during generation. Our approach combines sequential Monte Carlo, which estimates the posterior distribution by sampling from a proposal distribution, with a syntactic tagger that ensures that each generated token aligns with the desired syntactic structure. Our experiments with GPT2 and Llama3-8B models show that with an appropriate proposal distribution, we can improve syntactic accuracy, increasing the F1 score from 12.31 (GPT2-large) and 35.33 (Llama3-8B) to about 93 in both cases without compromising the language model's fluency. These results underscore both the complexity of syntactic control and the effectiveness of sampling algorithms, offering a promising approach for applications where precise control over syntax is essential.

Heterogeneous LLM serving stacks split scheduling into two layers that optimize in isolation: model routers pick a model from quality and cost signals while ignoring instance load, and serving load balancers optimize queues while ignoring quality. We present RouteBalance, a serving-aware scheduling layer that fuses both into a single online assignment over concrete model instances, jointly trading off quality, latency, and cost. A batched in-process predictor stack and dead-reckoned instance state keep the joint decision cheap on the request hot path (approx32 ms at 12 req/s). On a 13-instance, 28-GPU heterogeneous cluster serving four model sizes, a single deployed RouteBalance stack traces the upper region of the three-way quality-cost-throughput frontier. Sweeping one weight vector reaches both the highest routing-decision quality (DeepEval 0.419, +0.013 over the strongest baseline, 95% CI [{+}0.005,{+}0.022]; the ordering holds when a second judge re-scores the actually served text) and, at its cost-priority corner, per-request cost that ties the cheapest baseline. With router engineering equalized against concurrent-scoring baseline variants we build, its balanced preset serves at 2.8 s and 30 req/s, leading 2.6 to 4.1times ahead of enhanced BEST-Route at high load. (Deploying those routers as published, one serial scoring call per request, makes them collapse 23times under load, a deployment-architecture effect we isolate separately, not the routing result.) A four-arm isolation shows the benefit follows from pricing latency at model-selection time; the learned predictors contribute calibration and SLO headroom rather than the headline frontier. Code: https://github.com/AKafakA/route-balance

A standard technique for scaling inference-time reasoning is Self-Consistency, whereby multiple candidate answers are sampled from an LLM and the most common answer is selected. More recently, it has been shown that weighted majority voting (e.g. Confidence-Informed Self Consistency (CISC)), which assigns a confidence value to each candidate answer and chooses the answer with the largest accumulated score, tends to be more accurate on a wide range of popular benchmarks. In practice, weighted majority voting necessitates calling a critic LLM on each candidate's reasoning trace to produce the answer's confidence score. This secondary series of LLM calls greatly increases the overhead and cost of weighted majority voting, despite its potential performance benefits. To reduce this expense, we propose VecCISC, a lightweight, adaptive framework that uses a measure of semantic similarity to filter reasoning traces that are semantically equivalent to others, degenerate, or hallucinated, thus decreasing the number of candidate answers that must be evaluated by the critic. To ensure adequate experimental thoroughness, we evaluate VecCISC on five challenging, widely-adopted datasets spanning the domains of mathematics, chemistry, biology, commonsense reasoning, and the humanities. Our results demonstrate that VecCISC reduces the total token usage by 47%, while maintaining or exceeding the accuracy of CISC.

In peer mechanisms, the competitors for a prize also determine who wins. Each competitor may be asked to rank, grade, or nominate peers for the prize. Since the prize can be valuable, such as financial aid, course grades, or an award at a conference, competitors may be tempted to manipulate the mechanism. We survey approaches to prevent or discourage the manipulation of peer mechanisms. We conclude our survey by identifying several important research challenges.

Recently, the generality of natural language text has been leveraged to develop transferable recommender systems. The basic idea is to employ pre-trained language models~(PLM) to encode item text into item representations. Despite the promising transferability, the binding between item text and item representations might be too tight, leading to potential problems such as over-emphasizing the effect of text features and exaggerating the negative impact of domain gap. To address this issue, this paper proposes VQ-Rec, a novel approach to learning Vector-Quantized item representations for transferable sequential Recommenders. The main novelty of our approach lies in the new item representation scheme: it first maps item text into a vector of discrete indices (called item code), and then employs these indices to lookup the code embedding table for deriving item representations. Such a scheme can be denoted as "text Longrightarrow code Longrightarrow representation". Based on this representation scheme, we further propose an enhanced contrastive pre-training approach, using semi-synthetic and mixed-domain code representations as hard negatives. Furthermore, we design a new cross-domain fine-tuning method based on a differentiable permutation-based network. Extensive experiments conducted on six public benchmarks demonstrate the effectiveness of the proposed approach, in both cross-domain and cross-platform settings. Code and pre-trained model are available at: https://github.com/RUCAIBox/VQ-Rec.

Automated ideation systems are often evaluated on the novelty of the ideas they produce, and that judgment is increasingly delegated to large language models. Such judges are typically built ad hoc and validated, if at all, on human-authored papers rather than on the generated ideas they are meant to score. So, how do novelty judges perform? Not well. We present a systematic controlled study of novelty evaluation design choices. We first build an evaluation set automatically, mining OpenReview for passages where reviewers explicitly affirm or dispute a paper's originality and keeping only submissions with unanimous agreement at the extremes of their research area; we pair these with ideas from a vanilla LLM generator. Across six judges, we find that small prompt design choices have large consequences; e.g., simply telling the judge that reviewers found one idea novel and the other not can change its verdict on more than half of the identical idea pairs it is shown, shifting pairwise accuracy by over 50 points and occasionally pushing it below chance. The same change helps one judge and hurts another. Retrieval and larger reasoning budgets help little, and two purpose-built novelty evaluators are outperformed by our cheapest prompted baseline. These results raise questions about reported novelty gains of automated ideation systems, and call for robust novelty evaluation methods.

The weight matrix (WM) of a neural network (NN) is its program. The programs of many traditional NNs are learned through gradient descent in some error function, then remain fixed. The WM of a self-referential NN, however, can keep rapidly modifying all of itself during runtime. In principle, such NNs can meta-learn to learn, and meta-meta-learn to meta-learn to learn, and so on, in the sense of recursive self-improvement. While NN architectures potentially capable of implementing such behaviour have been proposed since the '90s, there have been few if any practical studies. Here we revisit such NNs, building upon recent successes of fast weight programmers and closely related linear Transformers. We propose a scalable self-referential WM (SRWM) that learns to use outer products and the delta update rule to modify itself. We evaluate our SRWM in supervised few-shot learning and in multi-task reinforcement learning with procedurally generated game environments. Our experiments demonstrate both practical applicability and competitive performance of the proposed SRWM. Our code is public.

Quantile regression is a fundamental problem in statistical learning motivated by a need to quantify uncertainty in predictions, or to model a diverse population without being overly reductive. For instance, epidemiological forecasts, cost estimates, and revenue predictions all benefit from being able to quantify the range of possible values accurately. As such, many models have been developed for this problem over many years of research in statistics, machine learning, and related fields. Rather than proposing yet another (new) algorithm for quantile regression we adopt a meta viewpoint: we investigate methods for aggregating any number of conditional quantile models, in order to improve accuracy and robustness. We consider weighted ensembles where weights may vary over not only individual models, but also over quantile levels, and feature values. All of the models we consider in this paper can be fit using modern deep learning toolkits, and hence are widely accessible (from an implementation point of view) and scalable. To improve the accuracy of the predicted quantiles (or equivalently, prediction intervals), we develop tools for ensuring that quantiles remain monotonically ordered, and apply conformal calibration methods. These can be used without any modification of the original library of base models. We also review some basic theory surrounding quantile aggregation and related scoring rules, and contribute a few new results to this literature (for example, the fact that post sorting or post isotonic regression can only improve the weighted interval score). Finally, we provide an extensive suite of empirical comparisons across 34 data sets from two different benchmark repositories.

Large language models (LLMs) are currently applied to scientific paper evaluation by assigning an absolute score to each paper independently. However, since score scales vary across conferences, time periods, and evaluation criteria, models trained on absolute scores are prone to fitting narrow, context-specific rules rather than developing robust scholarly judgment. To overcome this limitation, we propose shifting paper evaluation from isolated scoring to collaborative ranking. In particular, we design Comparison-Native framework for Paper Evaluation (CNPE), integrating comparison into both data construction and model learning. We first propose a graph-based similarity ranking algorithm to facilitate the sampling of more informative and discriminative paper pairs from a collection. We then enhance relative quality judgment through supervised fine-tuning and reinforcement learning with comparison-based rewards. At inference, the model performs pairwise comparisons over sampled paper pairs and aggregates these preference signals into a global relative quality ranking. Experimental results demonstrate that our framework achieves an average relative improvement of 21.8\% over the strong baseline DeepReview-14B, while exhibiting robust generalization to five previously unseen datasets. https://github.com/ECNU-Text-Computing/ComparisonReview{Code}.

Test-time scaling can improve large language model reasoning by generating and combining multiple candidate responses. In sampling-based methods, the inference budget is often described by the number of generated candidates, N. However, N tells us how many candidates are generated, not how they are executed. The same candidate budget can be produced in one batched generation call or split across several sequential calls with smaller batch sizes. We first study the effect of increasing N on reasoning accuracy using Phi-3-mini and Qwen2.5-1.5B on 500 GSM8K prompts. As expected, increasing N from 1 to 8 improves accuracy by 8.4 percentage points for Phi-3-mini and 18.4 points for Qwen2.5-1.5B. However, accuracy alone does not show the systems cost of using a larger candidate budget. We therefore fix N = 8 and compare four generation schedules: 1x8, 2x4, 4x2, and 8x1, where axb denotes a generation calls with b candidates per call. We measure latency, throughput, GPU-hours, and gross GPU-device energy while keeping the total candidate count fixed. On A100 GPUs, eight serial calls use 4.64-4.86x as much gross GPU-device energy and have 5.77-6.12x the P95 latency of one batched call with eight candidates. The same pattern appears across three independently scheduled A100 nodes per model and in short-output SciQ/V100 experiments. These results show that candidate count alone is not enough to describe the systems cost of multi-candidate test-time scaling. When candidates are independent and memory allows it, fewer generation calls with larger batch sizes are more efficient. Evaluations should therefore report not only candidate count and accuracy, but also generation schedule and GPU-level systems metrics.

The ``LLM-as-a-judge'' paradigm has become a standard method for evaluating open-ended generation. To address the quadratic scalability costs of pairwise comparisons, popular benchmarks like Arena-Hard and AlpacaEval compare all models against a single anchor. However, despite its widespread use, the impact of anchor selection on the reliability of the results remains largely unexplored. In this work, we systematically investigate the effect of anchor selection by evaluating 22 different anchors on the Arena-Hard-v2.0 dataset. We find that the choice of anchor is critical: a poor anchor can dramatically reduce correlation with human rankings. We identify that common anchor choices (best-performing and worst-performing models) make poor anchors. Because these extreme anchors are consistently better or worse than all other models, they are seldom indicative of the relative ranking of the models. We further quantify the effect size of anchor selection, showing it is comparable to the selection of a judge model. We conclude with actionable recommendations. First, we conduct a power analysis, and compute sufficient benchmark sizes for anchor-based evaluation, finding that standard benchmark sizes are insufficient for pairwise evaluation and fail to distinguish between competitive models reliably. Second, we provide guidelines for selecting informative anchors to ensure reliable and efficient evaluation practices.

Preference distillation typically treats a teacher response as preferred and the student's own response as rejected. This assumes that self-generated failures are the most informative negatives and that rejects must come from a model at least as large as the student, making generation costly at scale. We find neither assumption holds: across students from 7B to 72B, smaller frozen models generate rejects with less inference compute yet train stronger students than self-generated rejects, before and after sequence-level knowledge distillation, on code generation and mathematical reasoning. To explain this result, we derive a finite-horizon utility bound for Direct Preference Optimization in a linearized feature model. The bound characterizes favorable reject distributions and motivates three interventions. First, mixing rejects from smaller and student-scale models improves performance as the smaller model's share increases. Second, reassigning rejects to other prompts and shuffling their code tokens still outperform length-matched gibberish, showing that task structure contributes to reject utility. Third, selecting candidates with lower likelihood under the reference policy improves net transfer when higher-likelihood candidates provide less useful contrast. Lower-likelihood selections outperform higher-likelihood ones for every source. These results suggest that effective rejects preserve task structure while limiting coupling to the reference policy, and that smaller frozen models can provide them at low cost.

Aligning large language models (LLMs) with human preferences through reinforcement learning (RLHF) can lead to reward hacking, where LLMs exploit failures in the reward model (RM) to achieve seemingly high rewards without meeting the underlying objectives. We identify two primary challenges when designing RMs to mitigate reward hacking: distribution shifts during the RL process and inconsistencies in human preferences. As a solution, we propose Weight Averaged Reward Models (WARM), first fine-tuning multiple RMs, then averaging them in the weight space. This strategy follows the observation that fine-tuned weights remain linearly mode connected when sharing the same pre-training. By averaging weights, WARM improves efficiency compared to the traditional ensembling of predictions, while improving reliability under distribution shifts and robustness to preference inconsistencies. Our experiments on summarization tasks, using best-of-N and RL methods, shows that WARM improves the overall quality and alignment of LLM predictions; for example, a policy RL fine-tuned with WARM has a 79.4% win rate against a policy RL fine-tuned with a single RM.

We investigate the potential of weights to serve as effective representations, focusing on neural fields. Our key insight is that constraining the optimization space through a pre-trained base model and low-rank adaptation (LoRA) can induce structure in weight space. Across reconstruction, generation, and analysis tasks on 2D and 3D data, we find that multiplicative LoRA weights achieve high representation quality while exhibiting distinctiveness and semantic structure. When used with latent diffusion models, multiplicative LoRA weights enable higher-quality generation than existing weight-space methods.

We investigate the convergence rates and data sample sizes required for training a machine learning model using a stochastic gradient descent (SGD) algorithm, where data points are sampled based on either their loss value or uncertainty value. These training methods are particularly relevant for active learning and data subset selection problems. For SGD with a constant step size update, we present convergence results for linear classifiers and linearly separable datasets using squared hinge loss and similar training loss functions. Additionally, we extend our analysis to more general classifiers and datasets, considering a wide range of loss-based sampling strategies and smooth convex training loss functions. We propose a novel algorithm called Adaptive-Weight Sampling (AWS) that utilizes SGD with an adaptive step size that achieves stochastic Polyak's step size in expectation. We establish convergence rate results for AWS for smooth convex training loss functions. Our numerical experiments demonstrate the efficiency of AWS on various datasets by using either exact or estimated loss values.

A recommendation system uses the past purchases or ratings of n products by a group of m users, in order to provide personalized recommendations to individual users. The information is modeled as an m times n preference matrix which is assumed to have a good rank-k approximation, for a small constant k. In this work, we present a quantum algorithm for recommendation systems that has running time O(poly(k)polylog(mn)). All known classical algorithms for recommendation systems that work through reconstructing an approximation of the preference matrix run in time polynomial in the matrix dimension. Our algorithm provides good recommendations by sampling efficiently from an approximation of the preference matrix, without reconstructing the entire matrix. For this, we design an efficient quantum procedure to project a given vector onto the row space of a given matrix. This is the first algorithm for recommendation systems that runs in time polylogarithmic in the dimensions of the matrix and provides an example of a quantum machine learning algorithm for a real world application.

Generative recommender systems have recently attracted attention by formulating next-item prediction as an autoregressive sequence generation task. However, most existing methods optimize standard next-token likelihood and implicitly treat all tokens as equally informative, which is misaligned with semantic-ID-based generation. Accordingly, we propose two complementary information-gain-based token-weighting strategies tailored to generative recommendation with semantic IDs. Front-Greater Weighting captures conditional semantic information gain by prioritizing early tokens that most effectively reduce candidate-item uncertainty given their prefixes and encode coarse semantics. Frequency Weighting models marginal information gain under long-tailed item and token distributions, upweighting rare tokens to counteract popularity bias. Beyond individual strategies, we introduce a multi-target learning framework with curriculum learning that jointly optimizes the two token-weighted objectives alongside standard likelihood, enabling stable optimization and adaptive emphasis across training stages. Extensive experiments on benchmark datasets show that our method consistently outperforms strong baselines and existing token-weighting approaches, with improved robustness, strong generalization across different semantic-ID constructions, and substantial gains on both head and tail items. Code is available at https://github.com/CHIUWEINING/Token-Weighted-Multi-Target-Learning-for-Generative-Recommenders-with-Curriculum-Learning.

The effectiveness of recommendation systems is pivotal to user engagement and satisfaction in online platforms. As these recommendation systems increasingly influence user choices, their evaluation transcends mere technical performance and becomes central to business success. This paper addresses the multifaceted nature of recommendations system evaluation by introducing a comprehensive suite of metrics, each tailored to capture a distinct aspect of system performance. We discuss * Similarity Metrics: to quantify the precision of content-based filtering mechanisms and assess the accuracy of collaborative filtering techniques. * Candidate Generation Metrics: to evaluate how effectively the system identifies a broad yet relevant range of items. * Predictive Metrics: to assess the accuracy of forecasted user preferences. * Ranking Metrics: to evaluate the effectiveness of the order in which recommendations are presented. * Business Metrics: to align the performance of the recommendation system with economic objectives. Our approach emphasizes the contextual application of these metrics and their interdependencies. In this paper, we identify the strengths and limitations of current evaluation practices and highlight the nuanced trade-offs that emerge when optimizing recommendation systems across different metrics. The paper concludes by proposing a framework for selecting and interpreting these metrics to not only improve system performance but also to advance business goals. This work is to aid researchers and practitioners in critically assessing recommendation systems and fosters the development of more nuanced, effective, and economically viable personalization strategies. Our code is available at GitHub - https://github.com/aryan-jadon/Evaluation-Metrics-for-Recommendation-Systems.

Human evaluation is the gold-standard for evaluating text generation models. It is also expensive, and to fit budgetary constraints, a random subset of the test data is often chosen in practice. The randomly selected data may not accurately represent test performance, making this approach economically inefficient for model comparison. Thus, in this work, we develop a suite of selectors to get the most informative datapoints for human evaluation while taking the evaluation costs into account. We show that selectors based on variance in automated metric scores, diversity in model outputs, or Item Response Theory outperform random selection. We further develop an approach to distill these selectors to the scenario where the model outputs are not yet available. In particular, we introduce source-based estimators, which predict item usefulness for human evaluation just based on the source texts. We demonstrate the efficacy of our selectors in two common NLG tasks, machine translation and summarization, and show that up to only ~50% of the test data is needed to produce the same evaluation result as the entire data. Our implementations are published in the subset2evaluate package.

Best-of-N inference scaling (drawing N candidate answers from a language model and returning the one a reward model ranks highest) improves accuracy by an amount that varies across models, but predicting that amount in advance currently requires running the procedure end-to-end. Prior work links cheap statistics of a model's sampled outputs and validation-set correctness (how often samples agree, how diverse they are, how confident the model is, and where correct samples appear) to model behavior, but does not isolate which of these form a stable, compact predictor of best-of-N gain. We fit ridge predictors on features computed from a single labeled validation-set sampling pass, use bootstrap-Lasso as a stability analysis of the candidate feature set, and give a concentration analysis with an explicit linear-approximation residual. Across three base-model families, six post-training methods, and math and reasoning task domains, the stability analysis identifies a strict three-feature core spanning prompt-level agreement spread, label-assisted first-correct-sample position, and completion-length variance; a compact ridge predictor built from this core plus an entropy add-on reaches Spearman ρ= 0.90 with actual best-of-N gain under a reward-model verifier. The intended use is labeled validation-set screening of candidate configurations before paying the full reward-model scoring cost.

Benchmarks play a central role in the development and governance of models, yet it is often unclear whether they actually measure the concepts they purport to measure (e.g., reasoning, refusal). We adapt convergent and discriminant validity from the social sciences into an approach for interrogating AI benchmarks, applying it to 56 capability and safety benchmarks across 53 models. We label benchmarks with substantively similar purported concepts to a shared assigned concept, and ask whether model rankings on benchmarks with the same assigned concept correlate more strongly than rankings on benchmarks with different assigned concepts. We ask analogous questions at the item level using item response theory (IRT) models. We find that correlations between model rankings on benchmarks with the same assigned safety concepts are often weak, suggesting these concepts may be conceptualized inconsistently across benchmarks. For assigned capability concepts (e.g., reasoning, knowledge), model rankings are often as strongly correlated among benchmarks with the same assigned concept as between benchmarks with different assigned concepts, suggesting these capability concepts may not discriminate well from one another. In some cases, benchmarks that share design elements (e.g., score format) correlate more strongly than benchmarks with the same assigned concept. Finally, some individual benchmarks correlate more strongly with benchmarks assigned a different concept than with benchmarks sharing their own assigned concept, suggesting they may measure a different concept than they purport to. For example, BBQ-accuracy correlates more strongly with benchmarks labeled reasoning than with benchmarks that share its assigned concept, bias. To support future empirical work on benchmark validity, we release our extensive dataset of model outputs and scores at the item- and benchmark-level.

Peer reviewing is a central component in the scientific publishing process. We present the first public dataset of scientific peer reviews available for research purposes (PeerRead v1) providing an opportunity to study this important artifact. The dataset consists of 14.7K paper drafts and the corresponding accept/reject decisions in top-tier venues including ACL, NIPS and ICLR. The dataset also includes 10.7K textual peer reviews written by experts for a subset of the papers. We describe the data collection process and report interesting observed phenomena in the peer reviews. We also propose two novel NLP tasks based on this dataset and provide simple baseline models. In the first task, we show that simple models can predict whether a paper is accepted with up to 21% error reduction compared to the majority baseline. In the second task, we predict the numerical scores of review aspects and show that simple models can outperform the mean baseline for aspects with high variance such as 'originality' and 'impact'.

High-quality medical systematic reviews require comprehensive literature searches to ensure the recommendations and outcomes are sufficiently reliable. Indeed, searching for relevant medical literature is a key phase in constructing systematic reviews and often involves domain (medical researchers) and search (information specialists) experts in developing the search queries. Queries in this context are highly complex, based on Boolean logic, include free-text terms and index terms from standardised terminologies (e.g., MeSH), and are difficult and time-consuming to build. The use of MeSH terms, in particular, has been shown to improve the quality of the search results. However, identifying the correct MeSH terms to include in a query is difficult: information experts are often unfamiliar with the MeSH database and unsure about the appropriateness of MeSH terms for a query. Naturally, the full value of the MeSH terminology is often not fully exploited. This paper investigates methods to suggest MeSH terms based on an initial Boolean query that includes only free-text terms. These methods promise to automatically identify highly effective MeSH terms for inclusion in a systematic review query. Our study contributes an empirical evaluation of several MeSH term suggestion methods. We perform an extensive analysis of the retrieval, ranking, and refinement of MeSH term suggestions for each method and how these suggestions impact the effectiveness of Boolean queries.

Replacing one LLM agent with a collaborating team can raise accuracy, but whether scaling the team helps, and which architecture to scale, is unclear. Sweeping eight agent orchestration architectures across five instruction-tuned 7-9B models, five short-answer benchmarks, and an executable-code benchmark up to 30 calls, we find that the returns to team scaling are sharply task-dependent: from three to thirty calls accuracy rises by up to 17 points on the two arithmetic word-problem benchmarks (GSM8K, GSMHard) but by at most four on ARC, GPQA, and MMLU, for every architecture, a split the usual task-averaged number conceals. Proposer-Critic captures the arithmetic gains, scaling steepest and, in aggregate, surpassing every other architecture at the largest budget (item-clustered intervals exclude zero), though it ranks among the weakest elsewhere, and no architecture wins across tasks. We explain these trajectories with an exact generate-transform decomposition. Partitioning any workflow into proposal coverage and a downstream transform, any accuracy change splits exactly into an extensive coverage dividend and an intensive transformation change. The decomposition diagnoses each task: arithmetic offers coverage headroom that a critic-guided transform converts, whereas the multiple-choice benchmarks either saturate in coverage or fail to convert it, and on open-ended code generative recovery nearly vanishes so accuracy tracks coverage. At equal call budgets token cost still varies 2.1x. Extra calls therefore create candidate opportunity that only some architectures, on some tasks, convert. Team scaling is a task- and architecture-specific bet, not a uniform lever.

We study LLM routing, the problem of selecting the best model for each query while balancing user satisfaction, model expertise, and inference cost. We formulate routing as contextual dueling bandits, learning from pairwise preference feedback rather than absolute scores, thereby yielding label-efficient and dynamic adaptation. Building on this formulation, we introduce Category-Calibrated Fine-Tuning (CCFT), a representation-learning method that derives model embeddings from offline data using contrastive fine-tuning with categorical weighting. These embeddings enable the practical instantiation of Feel-Good Thompson Sampling for Contextual Dueling Bandits (FGTS.CDB), a theoretically grounded posterior-sampling algorithm. We propose four variants of the categorical weighting that explicitly integrate model quality and cost, and we empirically evaluate the proposed methods on the RouterBench and MixInstruct datasets. Across both benchmarks, our methods achieve lower cumulative regret and faster convergence, with better robustness and performance-cost balance than strong baselines built with a general-purpose OpenAI embedding model.

Fairness is an emerging and challenging topic in recommender systems. In recent years, various ways of evaluating and therefore improving fairness have emerged. In this study, we examine existing evaluation measures of fairness in recommender systems. Specifically, we focus solely on exposure-based fairness measures of individual items that aim to quantify the disparity in how individual items are recommended to users, separate from item relevance to users. We gather all such measures and we critically analyse their theoretical properties. We identify a series of limitations in each of them, which collectively may render the affected measures hard or impossible to interpret, to compute, or to use for comparing recommendations. We resolve these limitations by redefining or correcting the affected measures, or we argue why certain limitations cannot be resolved. We further perform a comprehensive empirical analysis of both the original and our corrected versions of these fairness measures, using real-world and synthetic datasets. Our analysis provides novel insights into the relationship between measures based on different fairness concepts, and different levels of measure sensitivity and strictness. We conclude with practical suggestions of which fairness measures should be used and when. Our code is publicly available. To our knowledge, this is the first critical comparison of individual item fairness measures in recommender systems.

Leveraging Large Language Models (LLMs) for recommendation has recently garnered considerable attention, where fine-tuning plays a key role in LLMs' adaptation. However, the cost of fine-tuning LLMs on rapidly expanding recommendation data limits their practical application. To address this challenge, few-shot fine-tuning offers a promising approach to quickly adapt LLMs to new recommendation data. We propose the task of data pruning for efficient LLM-based recommendation, aimed at identifying representative samples tailored for LLMs' few-shot fine-tuning. While coreset selection is closely related to the proposed task, existing coreset selection methods often rely on suboptimal heuristic metrics or entail costly optimization on large-scale recommendation data. To tackle these issues, we introduce two objectives for the data pruning task in the context of LLM-based recommendation: 1) high accuracy aims to identify the influential samples that can lead to high overall performance; and 2) high efficiency underlines the low costs of the data pruning process. To pursue the two objectives, we propose a novel data pruning method based on two scores, i.e., influence score and effort score, to efficiently identify the influential samples. Particularly, the influence score is introduced to accurately estimate the influence of sample removal on the overall performance. To achieve low costs of the data pruning process, we use a small-sized surrogate model to replace LLMs to obtain the influence score. Considering the potential gap between the surrogate model and LLMs, we further propose an effort score to prioritize some hard samples specifically for LLMs. Empirical results on three real-world datasets validate the effectiveness of our proposed method. In particular, the proposed method uses only 2% samples to surpass the full data fine-tuning, reducing time costs by 97%.

Relevance and fairness are two major objectives of recommender systems (RSs). Recent work proposes measures of RS fairness that are either independent from relevance (fairness-only) or conditioned on relevance (joint measures). While fairness-only measures have been studied extensively, we look into whether joint measures can be trusted. We collect all joint evaluation measures of RS relevance and fairness, and ask: How much do they agree with each other? To what extent do they agree with relevance/fairness measures? How sensitive are they to changes in rank position, or to increasingly fair and relevant recommendations? We empirically study for the first time the behaviour of these measures across 4 real-world datasets and 4 recommenders. We find that most of these measures: i) correlate weakly with one another and even contradict each other at times; ii) are less sensitive to rank position changes than relevance- and fairness-only measures, meaning that they are less granular than traditional RS measures; and iii) tend to compress scores at the low end of their range, meaning that they are not very expressive. We counter the above limitations with a set of guidelines on the appropriate usage of such measures, i.e., they should be used with caution due to their tendency to contradict each other and of having a very small empirical range.

Weighting methods in causal inference have been widely used to achieve a desirable level of covariate balancing. However, the existing weighting methods have desirable theoretical properties only when a certain model, either the propensity score or outcome regression model, is correctly specified. In addition, the corresponding estimators do not behave well for finite samples due to large variance even when the model is correctly specified. In this paper, we consider to use the integral probability metric (IPM), which is a metric between two probability measures, for covariate balancing. Optimal weights are determined so that weighted empirical distributions for the treated and control groups have the smallest IPM value for a given set of discriminators. We prove that the corresponding estimator can be consistent without correctly specifying any model (neither the propensity score nor the outcome regression model). In addition, we empirically show that our proposed method outperforms existing weighting methods with large margins for finite samples.

Reinforcement learning for flow-matching text-to-speech is complicated by deterministic ODE sampling: trajectory-level policy-gradient methods typically convert the ODE into an SDE and track per-step likelihood ratios, introducing stochastic perturbations and substantial overhead. We propose GROW, a group-relative advantage-weighted on-policy RL method that acts directly on the standard flow-matching objective. For each prompt, GROW samples a group of on-policy utterances, separately standardizes intelligibility and speaker-similarity rewards within the group, and combines them to reweight flow-matching regression. A Wasserstein-2 velocity penalty anchors the updated model to a frozen pretrained reference. A group-mean reward baseline is introduced to convert reward weighting into advantage weighting. For strong pretrained TTS models with concentrated rewards, positive exponential weighting is dominated by reward-agnostic self-imitation, whereas a zero-mean signed advantage preserves effective within-group credit assignment. Instantiated on DiTAR and evaluated on LibriSpeech and Seed-TTS EN/ZH, GROW reduces average WER from 2.016 to 1.558 and raises speaker similarity from 0.676 to 0.715 while keeping UTMOS. With 10-NFE training rollouts and 32-NFE evaluation, GROW retains comparable performance while training 2.9x faster than 32-NFE DiTAR-GRPO. We will open-source complete GROW codes, faithful DiTAR reproduction, and all model checkpoints.

Masked Language Modeling (MLM) is widely used to pretrain language models. The standard random masking strategy in MLM causes the pre-trained language models (PLMs) to be biased toward high-frequency tokens. Representation learning of rare tokens is poor and PLMs have limited performance on downstream tasks. To alleviate this frequency bias issue, we propose two simple and effective Weighted Sampling strategies for masking tokens based on the token frequency and training loss. We apply these two strategies to BERT and obtain Weighted-Sampled BERT (WSBERT). Experiments on the Semantic Textual Similarity benchmark (STS) show that WSBERT significantly improves sentence embeddings over BERT. Combining WSBERT with calibration methods and prompt learning further improves sentence embeddings. We also investigate fine-tuning WSBERT on the GLUE benchmark and show that Weighted Sampling also improves the transfer learning capability of the backbone PLM. We further analyze and provide insights into how WSBERT improves token embeddings.

Recent advances have made long-form report-generating systems widely available. This has prompted evaluation frameworks that use LLM-as-judge protocols and claim verification, along with meta-evaluation frameworks that seek to validate these methods. Many of the meta-evaluations estimate an evaluation quality's by comparing its assessments against human pairwise preferences. Prior work, however, suggests that human pairwise preference may be overly simplistic and can fail to capture nuances of expert expectations. We conduct a case study in meta-evaluation for long-form QA benchmarks using ScholarQA-CS2, a benchmark designed for assessing retrieval-augmented deep-research QA in the scientific domain. We comprehensively validate the benchmark through human pairwise preference judgments, then critically examine the strengths, weaknesses, and confounders of this approach. We show that pairwise preference rankings are best suited for system-level evaluation, while explicit metric-wise annotations and expert annotators are critical for reliable metric-level assessment, with subjectivity remaining a key challenge. Based on our findings, we offer practical guidelines for designing future meta-evaluations that better align evaluation methods, annotator expertise, and reporting practices. By surfacing these methodological challenges, we aim to advance evaluation standards for deep-research systems.

Can large language models improve without external data -- by generating their own questions and answers? We hypothesize that a pre-trained language model can improve its reasoning skills given only a single prompt specifying the topic (e.g., algebra word problems) and asking the model to generate its own questions. To do this, we propose Self-Questioning Language Models (SQLM): an asymmetric self-play framework where a proposer is given the topic and generates a question for a solver, who tries to answer it. Both the proposer and solver are trained via reinforcement learning. The proposer receives a reward if the problem is not too easy or too difficult, and the solver receives a reward based on majority voting, a proxy for correctness in the absence of ground-truth answers. For coding, the proposer can instead generate unit tests which are used for verification. We study this asymmetric self-play framework on three benchmarks: three-digit multiplication, algebra problems from the OMEGA benchmark, and programming problems from Codeforces. By continually generating more interesting problems and attempting to solve them, language models can improve on downstream benchmarks without access to any curated training datasets.

Recommendation foundation model utilizes large language models (LLM) for recommendation by converting recommendation tasks into natural language tasks. It enables generative recommendation which directly generates the item(s) to recommend rather than calculating a ranking score for each and every candidate item in traditional recommendation models, simplifying the recommendation pipeline from multi-stage filtering to single-stage filtering. To avoid generating excessively long text and hallucinated recommendation when deciding which item(s) to recommend, creating LLM-compatible item IDs to uniquely identify each item is essential for recommendation foundation models. In this study, we systematically examine the item indexing problem for recommendation foundation models, using P5 as an example of backbone model. To emphasize the importance of item indexing, we first discuss the issues of several trivial item indexing methods, such as independent indexing, title indexing, and random indexing. We then propose four simple yet effective solutions, including sequential indexing, collaborative indexing, semantic (content-based) indexing, and hybrid indexing. Our study highlights the significant influence of item indexing methods on the performance of LLM-based recommendation, and our results on real-world datasets validate the effectiveness of our proposed solutions. The research also demonstrates how recent advances on language modeling and traditional IR principles such as indexing can help each other for better learning and inference.

Pass@k is widely used to report the reasoning performance of LLMs, but it often produces unstable and potentially misleading rankings, especially when the number of trials (samples) is limited and computational resources are constrained. We present a principled Bayesian evaluation framework that replaces Pass@k and average accuracy over N trials (avg@N) with posterior estimates of a model's underlying success probability and credible intervals, yielding stable rankings and a transparent decision rule for differences. Evaluation outcomes are modeled as categorical (not just 0/1) with a Dirichlet prior, giving closed-form expressions for the posterior mean and uncertainty of any weighted rubric and enabling the use of prior evidence when appropriate. Theoretically, under a uniform prior, the Bayesian posterior mean is order-equivalent to average accuracy (Pass@1), explaining its empirical robustness while adding principled uncertainty. Empirically, in simulations with known ground-truth success rates and on AIME'24/'25, HMMT'25, and BrUMO'25, the posterior-based procedure achieves faster convergence and greater rank stability than Pass@k and recent variants, enabling reliable comparisons at far smaller sample counts. The framework clarifies when observed gaps are statistically meaningful (non-overlapping credible intervals) versus noise, and it naturally extends to graded, rubric-based evaluations. Together, these results recommend replacing Pass@k for LLM evaluation and ranking with a posterior-based, compute-efficient protocol that unifies binary and non-binary evaluation while making uncertainty explicit. Source code is available at https://github.com/mohsenhariri/scorio

Scientific progress depends on the continual generation of innovative re-search ideas. However, the rapid growth of scientific literature has greatly increased the cost of knowledge filtering, making it harder for researchers to identify novel directions. Although existing large language model (LLM)-based methods show promise in research idea generation, the ideas they produce are often repetitive and lack depth. To address this issue, this study proposes a multi-agent iterative planning search strategy inspired by com-binatorial innovation theory. The framework combines iterative knowledge search with an LLM-based multi-agent system to generate, evaluate, and re-fine research ideas through repeated interaction, with the goal of improving idea diversity and novelty. Experiments in the natural language processing domain show that the proposed method outperforms state-of-the-art base-lines in both diversity and novelty. Further comparison with ideas derived from top-tier machine learning conference papers indicates that the quality of the generated ideas falls between that of accepted and rejected papers. These results suggest that the proposed framework is a promising approach for supporting high-quality research idea generation. The source code and dataset used in this paper are publicly available on Github repository: https://github.com/ChenShuai00/MAGenIdeas. The demo is available at https://huggingface.co/spaces/cshuai20/MAGenIdeas.

SlopBench asks which models produce the stiff, repetitive prose readers call AI slop, a question detectors leave open once they have classified a text as machine-written. We evaluated eighteen models on 112 hand-written tasks in email, social posts, essays, and workplace chat, sampling each model on each task up to ten times, for 19,928 outputs in all. SlopBench scores four surface behaviors a reader can check by hand: length against the word band each task specifies, opener repetition across a model's own samples of one task, and paragraph rhythm and fixed lexical constructions against pre-ChatGPT human corpora. Under one fixed weighting, Kimi K2.6 scores lowest at 21.1 and Mistral Large highest at 40.6. Across 500 random reweightings Kimi has the lowest score in 58 percent of draws and Mistral the highest in 97 percent. No draw preserves the full order of the eighteen, and a scenario bootstrap leaves exactly one of those ranks unambiguous. We ran three further checks on that middle order: a crowd arena, an AI detector, and lexical diversity. None of them confirmed the order. We therefore report the four behaviors separately and treat the composite as one weighting among many, and we release the prompts, outputs, reference statistics, and scoring code.

Fine-tuning large pre-trained language models on downstream tasks has become an important paradigm in NLP. However, common practice fine-tunes all of the parameters in a pre-trained model, which becomes prohibitive when a large number of downstream tasks are present. Therefore, many fine-tuning methods are proposed to learn incremental updates of pre-trained weights in a parameter efficient way, e.g., low-rank increments. These methods often evenly distribute the budget of incremental updates across all pre-trained weight matrices, and overlook the varying importance of different weight parameters. As a consequence, the fine-tuning performance is suboptimal. To bridge this gap, we propose AdaLoRA, which adaptively allocates the parameter budget among weight matrices according to their importance score. In particular, AdaLoRA parameterizes the incremental updates in the form of singular value decomposition. Such a novel approach allows us to effectively prune the singular values of unimportant updates, which is essentially to reduce their parameter budget but circumvent intensive exact SVD computations. We conduct extensive experiments with several pre-trained models on natural language processing, question answering, and natural language generation to validate the effectiveness of AdaLoRA. Results demonstrate that AdaLoRA manifests notable improvement over baselines, especially in the low budget settings. Our code is publicly available at https://github.com/QingruZhang/AdaLoRA .

Pairwise re-ranking models predict which of two documents is more relevant to a query and then aggregate a final ranking from such preferences. This is often more effective than pointwise re-ranking models that directly predict a relevance value for each document. However, the high inference overhead of pairwise models limits their practical application: usually, for a set of k documents to be re-ranked, preferences for all k^2-k comparison pairs excluding self-comparisons are aggregated. We investigate whether the efficiency of pairwise re-ranking can be improved by sampling from all pairs. In an exploratory study, we evaluate three sampling methods and five preference aggregation methods. The best combination allows for an order of magnitude fewer comparisons at an acceptable loss of retrieval effectiveness, while competitive effectiveness is already achieved with about one third of the comparisons.

Large language models are typically aligned with human preferences by optimizing reward models (RMs) fitted to human feedback. However, human preferences are multi-faceted, and it is increasingly common to derive reward from a composition of simpler reward models which each capture a different aspect of language quality. This itself presents a challenge, as it is difficult to appropriately weight these component RMs when combining them. Compounding this difficulty, because any RM is only a proxy for human evaluation, this process is vulnerable to overoptimization, wherein past a certain point, accumulating higher reward is associated with worse human ratings. In this paper, we perform, to our knowledge, the first study on overoptimization in composite RMs, showing that correlation between component RMs has a significant effect on the locations of these points. We then introduce an approach to solve this issue using constrained reinforcement learning as a means of preventing the agent from exceeding each RM's threshold of usefulness. Our method addresses the problem of weighting component RMs by learning dynamic weights, naturally expressed by Lagrange multipliers. As a result, each RM stays within the range at which it is an effective proxy, improving evaluation performance. Finally, we introduce an adaptive method using gradient-free optimization to identify and optimize towards these points during a single run.

While large-scale training data is fundamental for developing capable large language models (LLMs), strategically selecting high-quality data has emerged as a critical approach to enhance training efficiency and reduce computational costs. Current data selection methodologies predominantly rely on static, training-agnostic criteria, failing to account for the dynamic model training and data interactions. In this paper, we propose a new Data Weighting Model (DWM) to adjust the weight of selected data within each batch to achieve a dynamic data utilization during LLM training. Specially, to better capture the dynamic data preference of the trained model, a bi-level optimization framework is implemented to update the weighting model. Our experiments demonstrate that DWM enhances the performance of models trained with randomly-selected data, and the learned weighting model can be transferred to enhance other data selection methods and models of different sizes. Moreover, we further analyze how a model's data preferences evolve throughout training, providing new insights into the data preference of the model during training.

Nowadays, the quality of responses generated by different modern large language models (LLMs) are hard to evaluate and compare automatically. Recent studies suggest and predominantly use LLMs as a reference-free metric for open-ended question answering. More specifically, they use the recognized "strongest" LLM as the evaluator, which conducts pairwise comparisons of candidate models' answers and provides a ranking score. However, this intuitive method has multiple problems, such as bringing in self-enhancement (favoring its own answers) and positional bias. We draw insights and lessons from the educational domain (Cho and MacArthur, 2011; Walsh, 2014) to improve LLM-based evaluations. Specifically, we propose the (1) peer rank (PR) algorithm that takes into account each peer LLM's pairwise preferences of all answer pairs, and outputs a final ranking of models; and (2) peer discussion (PD), where we prompt two LLMs to discuss and try to reach a mutual agreement on preferences of two answers. We conduct experiments on two benchmark datasets. We find that our approaches achieve higher accuracy and align better with human judgments, respectively. Interestingly, PR can induce a relatively accurate self-ranking of models under the anonymous setting, where each model's name is unrevealed. Our work provides space to explore evaluating models that are hard to compare for humans.

Block drafters propose several tokens in one forward pass, before earlier target tokens are realised. Their rejection mixes two losses: missing within-block path information and imperfect modelling of observable information. Accepted length cannot distinguish them. We separate the two with an information floor, the minimum expected rejection at a specified conditioning order; rejection above this floor is the model gap. Estimating both from target rollouts across four domains, four open-weight targets, and a frontier API target yields three findings. First, the all-parallel floor reaches 0.286 at the final slot on Qwen3-4B, limiting even the best proposal to 71% per-slot acceptance. Second, one realised token removes 86--100% of this floor, a locality also recovered by an independent mutual-information analysis. Third, current drafters remain far above their floors: the final-slot model gap accounts for 43--64% of DFlash rejection and 85--92% of DSpark's oracle-conditioned rejection. These findings separate the value of short-range conditioning from proposal quality. Guided by this distinction, we replace a context-independent predecessor correction with a prefix-attention head that reads committed context conditional on the predecessor. With supporting backbone components, the resulting Qwen3-4B drafter improves mean serving accepted length by 3.83% over the released DSpark checkpoint across nine tasks, without increasing the conditioning order.

We present weight normalization: a reparameterization of the weight vectors in a neural network that decouples the length of those weight vectors from their direction. By reparameterizing the weights in this way we improve the conditioning of the optimization problem and we speed up convergence of stochastic gradient descent. Our reparameterization is inspired by batch normalization but does not introduce any dependencies between the examples in a minibatch. This means that our method can also be applied successfully to recurrent models such as LSTMs and to noise-sensitive applications such as deep reinforcement learning or generative models, for which batch normalization is less well suited. Although our method is much simpler, it still provides much of the speed-up of full batch normalization. In addition, the computational overhead of our method is lower, permitting more optimization steps to be taken in the same amount of time. We demonstrate the usefulness of our method on applications in supervised image recognition, generative modelling, and deep reinforcement learning.

This paper presents FormationEval, an open multiple-choice question benchmark for evaluating language models on petroleum geoscience and subsurface disciplines. The dataset contains 505 questions across seven domains including petrophysics, petroleum geology and reservoir engineering, derived from three authoritative sources using a reasoning model with detailed instructions and a concept-based approach that avoids verbatim copying of copyrighted text. Each question includes source metadata to support traceability and audit. The evaluation covers 72 models from major providers including OpenAI, Anthropic, Google, Meta and open-weight alternatives. The top performers achieve over 97\% accuracy, with Gemini 3 Pro Preview reaching 99.8\%, while tier and domain gaps persist. Among open-weight models, GLM-4.7 leads at 98.6\%, with several DeepSeek, Llama, Qwen and Mistral models also exceeding 93\%. The performance gap between open-weight and closed models is narrower than expected, with several lower-cost open-weight models exceeding 90\% accuracy. Petrophysics emerges as the most challenging domain across all models, while smaller models show wider performance variance. Residual length bias in the dataset (correct answers tend to be longer) is documented along with bias mitigation strategies applied during construction. The benchmark, evaluation code and results are publicly available.

Effective implementations of sampling-based probabilistic inference often require manually constructed, model-specific proposals. Inspired by recent progresses in meta-learning for training learning agents that can generalize to unseen environments, we propose a meta-learning approach to building effective and generalizable MCMC proposals. We parametrize the proposal as a neural network to provide fast approximations to block Gibbs conditionals. The learned neural proposals generalize to occurrences of common structural motifs across different models, allowing for the construction of a library of learned inference primitives that can accelerate inference on unseen models with no model-specific training required. We explore several applications including open-universe Gaussian mixture models, in which our learned proposals outperform a hand-tuned sampler, and a real-world named entity recognition task, in which our sampler yields higher final F1 scores than classical single-site Gibbs sampling.

On-premise assistants can give factory workers conversational access to machine documentation, but models capable of the task rarely fit shop-floor hardware. We show that after structural compression and retrieval-grounded adaptation, model size is no longer a reliable predictor of adapted answer quality: general capability falls almost linearly with parameter count, while judged retrieval-augmented answer quality does not. We therefore treat deployment as a post-adaptation selection problem, committing one sub-network per device on judged answer quality and measured on-device throughput under a configurable general-capability floor and memory budget; rules that optimize size, speed, or quality alone each give up capability or throughput. A weight-shared supernetwork trained with sandwich-style in-place distillation keeps this selection inexpensive. In a manufacturing-manual case study, extraction costs 13.7 percent of the unpruned model's judged quality and retrieval-grounded distillation returns it to within 4.6 percent, recovering two thirds of the loss, and the same assistant runs across three heterogeneous edge tiers at 1.3 to 5 watts standby.

As LLMs are increasingly used for pre-submission self-review, there is growing demand for feedback that not only identifies weaknesses but also guides authors toward concrete revisions. We study this as Actionable Peer-review Generation and decompose it into two subtasks: diagnostic claim generation and revision suggestion generation. We introduce ActReview, a rebuttal-guided post-training framework that connects paper-specific diagnoses to concrete, grounded revision plans. Our central insight is that author rebuttals reveal plausible actions for addressing reviewer concerns and can therefore provide latent supervision for revision-oriented feedback. From real review-rebuttal threads on OpenReview, we construct ActReview-40K by aligning reviewer weaknesses with author responses and grounding the resulting feedback in localized paper evidence. We post-train Qwen3-8B-Base with multi-task supervised fine-tuning followed by GRPO using candidate-aware, weakness-specific rubric rewards. We also introduce ActReview-Bench, a human-curated benchmark of 1,000 instances for evaluating diagnostic quality and revision usefulness. Experiments show that ActReview outperforms prior specialized review-generation models on actionability and grounding while remaining competitive with strong prompt-based LLMs. Human evaluation confirms improved revision usefulness while revealing a remaining gap in technical accuracy, and additional analyses support generalization to held-out papers and robustness across independent judges.

This systematic review explores the application of Large Language Models (LLMs) in Combinatorial Optimization (CO). We report our findings using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. We conduct a literature search via Scopus and Google Scholar, examining over 2,000 publications. We assess publications against four inclusion and four exclusion criteria related to their language, research focus, publication year, and type. Eventually, we select 103 studies. We classify these studies into semantic categories and topics to provide a comprehensive overview of the field, including the tasks performed by LLMs, the architectures of LLMs, the existing datasets specifically designed for evaluating LLMs in CO, and the field of application. Finally, we identify future directions for leveraging LLMs in this field.

ufakzeka-karar is an open Turkish decision model with 182,494,466 parameters. Given a Turkish text and questions of a fixed answer type (a choice, a level on an ordered scale, or yes or no), it returns a temperature-scaled probability for every option and an expected error that serves as a "not sure" signal, without generating text and in one CPU forward pass for up to ten options. Built on the lab's ufakzeka-1-base, its head scores each option blind to the others at shared positions, so the answer does not depend on option order. A sequential head trained with shuffled options was about as accurate but changed 2.3 to 2.8 percent of its answers when only the option order changed; REINFORCE lost 10.2 points (0.102) of macro F1 to cross-entropy. On the open set of HakemBench v1.0 (4,275 questions, 7 tracks) the released model ranks 7th of 16 rows with a composite of 0.660 (95% interval 0.642 to 0.677). Temperature scaling lowers calibration error (smooth ECE) on the development set but raises it on held-out support questions, from 0.027 to 0.045 for the first scored run, which never trained on them; the released model later trained on them, so its 0.036 to 0.064 is not an unseen-question test. The released model is the last of three runs scored on HakemBench, and its numbers are not blind. The second run's new training data was aimed at the first run's errors on the full test set in guardrails, moderation and customer support, and the released run was trained after the second run's guardrail results on the full test set were read, under a protocol fixed in writing before any of its data, code or runs. All its numbers come after these readings; its guardrail, moderation and customer support numbers carry the flag "shaped by reading the test results". With every model scored on the other four tracks only, its composite is 0.678, 6th of 16. Weights and code are under Apache-2.0.

A paraphrase-quality audit of MathCheck (ICLR 2025) detected 4 semantically incorrect paraphrases in 129 groups (3.1%); removing them drops GPT-4o from rank 2 to rank 4 and elevates Claude Haiku and DeepSeek V3 above it; these ranking changes are invisible to any single-model evaluation. Cross-model unanimity found these errors automatically (>= 3/4 models for MathCheck; >= 6/9 for our primary evaluation) for under $10; in our own dataset the same protocol found that 47% of auto-generated connective-variation paraphrases were semantically incorrect. That flaw compounds a deeper measurement gap: Claude Haiku 4.5 achieves 86% accuracy yet SCR=50%, meaning half its theorems are answered differently under semantically equivalent restatements, while aggregate accuracy across 9 models spans only 86-96% yet Semantic Consistency Rates (SCR) span 50-82% -- a 32-point gap invisible to standard benchmarks. Formally, for any target ranking over 9 frontier models there exists a weighting over paraphrase families that realizes it (No-Free-Benchmark corollary), because no model Pareto-dominates all families -- so benchmark designers who select families are implicitly choosing which model wins. FormInv supplies the audit protocol (replicated on external benchmarks at 100% recall), SCR and per-theorem Cochran's Q as primary invariance measures evaluated on 9 models across 366-811 items (on Lean4-verified theorems), and FormInvSelector for regime-aware model selection.

Context: Recent research indicates that Web queries written by software developers are not very successful in retrieving relevant results, performing measurably worse compared to general purpose Web queries. Most approaches up to this point have addressed this problem with software engineering-specific automated query reformulation techniques, which work without developer involvement but are limited by the content of the original query. In other words, these techniques automatically improve the existing query but can not contribute new, previously unmentioned, concepts. Objective: In this paper, we propose a technique to guide software developers in manually improving their own Web search queries. We examine a conversational approach that follows unsuccessful queries with a clarification question aimed at eliciting additional query terms, thus providing to the developer a clear dimension along which the query could be improved. Methods: We describe a set of clarification questions derived from a corpus of software developer queries and a neural approach to recommending them for a newly issued query. Results: Our evaluation indicates that the recommendation technique is accurate, predicting a valid clarification question 80% of the time and outperforms simple baselines, as well as, state-of-the-art Learning To Rank (LTR) baselines. Conclusion: As shown in the experimental results, the described approach is capable at recommending appropriate clarification questions to software developers and considered useful by a sample of developers ranging from novices to experienced professionals.

We propose an acceleration scheme for large language models (LLMs) through Speculative Decoding with Semantic Adaptive Tokens (SDSAT). The primary objective of this design is to enhance the LLM model's ability to generate draft tokens more accurately without compromising the model's accuracy. The core strategies involve: 1) Fine-tune the model by incorporating semantic adaptive tokens that possess flexible decoding capabilities without changing its structure, allowing them to generate high-quality draft tokens. 2) By employing a training method that does not affect the standard tokens, the model can acquire parallel decoding abilities atop its original framework with minimal training overhead. 3) We have designed the "two-step-draft-then-verify" generation strategies using both greedy search and nucleus sampling. Experiments conducted on the CodeLlama-13B and 7B models have yielded speed increases of over 3.5X and 3.0X, respectively. Please refer to https://github.com/hasuoshenyun/SDSAT.

In Machine Learning, a benchmark refers to an ensemble of datasets associated with one or multiple metrics together with a way to aggregate different systems performances. They are instrumental in (i) assessing the progress of new methods along different axes and (ii) selecting the best systems for practical use. This is particularly the case for NLP with the development of large pre-trained models (e.g. GPT, BERT) that are expected to generalize well on a variety of tasks. While the community mainly focused on developing new datasets and metrics, there has been little interest in the aggregation procedure, which is often reduced to a simple average over various performance measures. However, this procedure can be problematic when the metrics are on a different scale, which may lead to spurious conclusions. This paper proposes a new procedure to rank systems based on their performance across different tasks. Motivated by the social choice theory, the final system ordering is obtained through aggregating the rankings induced by each task and is theoretically grounded. We conduct extensive numerical experiments (on over 270k scores) to assess the soundness of our approach both on synthetic and real scores (e.g. GLUE, EXTREM, SEVAL, TAC, FLICKR). In particular, we show that our method yields different conclusions on state-of-the-art systems than the mean-aggregation procedure while being both more reliable and robust.

The development of state-of-the-art systems in different applied areas of machine learning (ML) is driven by benchmarks, which have shaped the paradigm of evaluating generalisation capabilities from multiple perspectives. Although the paradigm is shifting towards more fine-grained evaluation across diverse tasks, the delicate question of how to aggregate the performances has received particular interest in the community. In general, benchmarks follow the unspoken utilitarian principles, where the systems are ranked based on their mean average score over task-specific metrics. Such aggregation procedure has been viewed as a sub-optimal evaluation protocol, which may have created the illusion of progress. This paper proposes Vote'n'Rank, a framework for ranking systems in multi-task benchmarks under the principles of the social choice theory. We demonstrate that our approach can be efficiently utilised to draw new insights on benchmarking in several ML sub-fields and identify the best-performing systems in research and development case studies. The Vote'n'Rank's procedures are more robust than the mean average while being able to handle missing performance scores and determine conditions under which the system becomes the winner.