Daily Papers

Knowledge Graph Foundation Models (KGFMs) have shown promise in enabling zero-shot reasoning over unseen graphs by learning transferable patterns. However, most existing KGFMs rely solely on graph structure, overlooking the rich semantic signals encoded in textual attributes. We introduce SEMMA, a dual-module KGFM that systematically integrates transferable textual semantics alongside structure. SEMMA leverages Large Language Models (LLMs) to enrich relation identifiers, generating semantic embeddings that subsequently form a textual relation graph, which is fused with the structural component. Across 54 diverse KGs, SEMMA outperforms purely structural baselines like ULTRA in fully inductive link prediction. Crucially, we show that in more challenging generalization settings, where the test-time relation vocabulary is entirely unseen, structural methods collapse while SEMMA is 2x more effective. Our findings demonstrate that textual semantics are critical for generalization in settings where structure alone fails, highlighting the need for foundation models that unify structural and linguistic signals in knowledge reasoning.

Large language models (LLMs) exhibit remarkable reasoning abilities, allowing them to generalize across a wide range of downstream tasks, such as commonsense reasoning or instruction following. However, as LLMs scale, inference costs become increasingly prohibitive, accumulating significantly over their life cycle. This poses the question: Can we compress pre-trained LLMs to meet diverse size and latency requirements? We leverage Neural Architecture Search (NAS) to compress LLMs by pruning structural components, such as attention heads, neurons, and layers, aiming to achieve a Pareto-optimal balance between performance and efficiency. While NAS already achieved promising results on small language models in previous work, in this paper we propose various extensions that allow us to scale to LLMs. Compared to structural pruning baselines, we show that NAS improves performance up to 3.4% on MMLU with an on-device latency speedup.

Large Language Models (LLMs) have enabled remarkable progress in natural language processing, yet their high computational and memory demands pose challenges for deployment in resource-constrained environments. Although recent low-rank decomposition methods offer a promising path for structural compression, they often suffer from accuracy degradation, expensive calibration procedures, and result in inefficient model architectures that hinder real-world inference speedups. In this paper, we propose FLAT-LLM, a fast and accurate, training-free structural compression method based on fine-grained low-rank transformations in the activation space. Specifically, we reduce the hidden dimension by transforming the weights using truncated eigenvectors computed via head-wise Principal Component Analysis, and employ a greedy budget redistribution strategy to adaptively allocate ranks across decoders. FLAT-LLM achieves efficient and effective weight compression without recovery fine-tuning, which could complete the calibration within a few minutes. Evaluated across 5 models and 11 datasets, FLAT-LLM outperforms structural pruning baselines in generalization and downstream performance, while delivering inference speedups over decomposition-based methods.

Localized subject-driven image editing aims to seamlessly integrate user-specified objects into target scenes. As generative models continue to scale, training becomes increasingly costly in terms of memory and computation, highlighting the need for training-free and scalable editing frameworks.To this end, we propose PosBridge an efficient and flexible framework for inserting custom objects. A key component of our method is positional embedding transplant, which guides the diffusion model to faithfully replicate the structural characteristics of reference objects.Meanwhile, we introduce the Corner Centered Layout, which concatenates reference images and the background image as input to the FLUX.1-Fill model. During progressive denoising, positional embedding transplant is applied to guide the noise distribution in the target region toward that of the reference object. In this way, Corner Centered Layout effectively directs the FLUX.1-Fill model to synthesize identity-consistent content at the desired location. Extensive experiments demonstrate that PosBridge outperforms mainstream baselines in structural consistency, appearance fidelity, and computational efficiency, showcasing its practical value and potential for broad adoption.

In many real-world applications, graph-structured data used for training and testing have differences in distribution, such as in high energy physics (HEP) where simulation data used for training may not match real experiments. Graph domain adaptation (GDA) is a method used to address these differences. However, current GDA primarily works by aligning the distributions of node representations output by a single graph neural network encoder shared across the training and testing domains, which may often yield sub-optimal solutions. This work examines different impacts of distribution shifts caused by either graph structure or node attributes and identifies a new type of shift, named conditional structure shift (CSS), which current GDA approaches are provably sub-optimal to deal with. A novel approach, called structural reweighting (StruRW), is proposed to address this issue and is tested on synthetic graphs, four benchmark datasets, and a new application in HEP. StruRW has shown significant performance improvement over the baselines in the settings with large graph structure shifts, and reasonable performance improvement when node attribute shift dominates.

The growing complexity of legal cases has lead to an increasing interest in legal information retrieval systems that can effectively satisfy user-specific information needs. However, such downstream systems typically require documents to be properly formatted and segmented, which is often done with relatively simple pre-processing steps, disregarding topical coherence of segments. Systems generally rely on representations of individual sentences or paragraphs, which may lack crucial context, or document-level representations, which are too long for meaningful search results. To address this issue, we propose a segmentation system that can predict topical coherence of sequential text segments spanning several paragraphs, effectively segmenting a document and providing a more balanced representation for downstream applications. We build our model on top of popular transformer networks and formulate structural text segmentation as topical change detection, by performing a series of independent classifications that allow for efficient fine-tuning on task-specific data. We crawl a novel dataset consisting of roughly 74,000 online Terms-of-Service documents, including hierarchical topic annotations, which we use for training. Results show that our proposed system significantly outperforms baselines, and adapts well to structural peculiarities of legal documents. We release both data and trained models to the research community for future work.https://github.com/dennlinger/TopicalChange

Web search is an essential way for humans to obtain information, but it's still a great challenge for machines to understand the contents of web pages. In this paper, we introduce the task of structural reading comprehension (SRC) on web. Given a web page and a question about it, the task is to find the answer from the web page. This task requires a system not only to understand the semantics of texts but also the structure of the web page. Moreover, we proposed WebSRC, a novel Web-based Structural Reading Comprehension dataset. WebSRC consists of 400K question-answer pairs, which are collected from 6.4K web pages. Along with the QA pairs, corresponding HTML source code, screenshots, and metadata are also provided in our dataset. Each question in WebSRC requires a certain structural understanding of a web page to answer, and the answer is either a text span on the web page or yes/no. We evaluate various baselines on our dataset to show the difficulty of our task. We also investigate the usefulness of structural information and visual features. Our dataset and baselines have been publicly available at https://x-lance.github.io/WebSRC/.

We introduce the Dual-View Pheromone Pathway Network (DPPN), an architecture that routes sparse attention through a persistent pheromone field over latent slot transitions, and use it to discover two independent requirements for persistent structural memory in neural networks. Through five progressively refined experiments using up to 10 seeds per condition across 5 model variants and 4 transfer targets, we identify a core principle: persistent memory requires a stable coordinate system, and any coordinate system learned jointly with the model is inherently unstable. We characterize three obstacles -- pheromone saturation, surface-structure entanglement, and coordinate incompatibility -- and show that neither contrastive updates, multi-source distillation, Hungarian alignment, nor semantic decomposition resolves the instability when embeddings are learned from scratch. Fixed random Fourier features provide extrinsic coordinates that are stable, structure-blind, and informative, but coordinate stability alone is insufficient: routing-bias pheromone does not transfer (10 seeds, p>0.05). DPPN outperforms transformer and random sparse baselines for within-task learning (AULC 0.700 vs 0.680 vs 0.670). Replacing routing bias with learning-rate modulation eliminates negative transfer: warm pheromone as a learning-rate prior achieves +0.003 on same-family tasks (17 seeds, p<0.05) while never reducing performance. A structure completion function over extrinsic coordinates produces +0.006 same-family bonus beyond regularization, showing the catch-22 between stability and informativeness is partially permeable to learned functions. The contribution is two independent requirements for persistent structural memory: (a) coordinate stability and (b) graceful transfer mechanism.

Graphic design generation demands a delicate balance between high visual fidelity and fine-grained structural editability. However, existing approaches typically bifurcate into either non-editable raster image synthesis or abstract layout generation devoid of visual content. Recent combinations of these two approaches attempt to bridge this gap but often suffer from rigid composition schemas and unresolvable visual dissonances (e.g., text-background conflicts) due to their inexpressive representation and open-loop nature. To address these challenges, we propose DesignAsCode, a novel framework that reimagines graphic design as a programmatic synthesis task using HTML/CSS. Specifically, we introduce a Plan-Implement-Reflect pipeline, incorporating a Semantic Planner to construct dynamic, variable-depth element hierarchies and a Visual-Aware Reflection mechanism that iteratively optimizes the code to rectify rendering artifacts. Extensive experiments demonstrate that DesignAsCode significantly outperforms state-of-the-art baselines in both structural validity and aesthetic quality. Furthermore, our code-native representation unlocks advanced capabilities, including automatic layout retargeting, complex document generation (e.g., resumes), and CSS-based animation.

Generating controllable character animation from a reference image and motion guidance remains a challenging task due to the inherent difficulty of injecting appearance and motion cues into video diffusion models. Prior works often rely on complex architectures, explicit guider modules, or multi-stage processing pipelines, which increase structural overhead and hinder deployment. Inspired by the strong visual context modeling capacity of pre-trained video diffusion transformers, we propose FramePrompt, a minimalist yet powerful framework that treats reference images, skeleton-guided motion, and target video clips as a unified visual sequence. By reformulating animation as a conditional future prediction task, we bypass the need for guider networks and structural modifications. Experiments demonstrate that our method significantly outperforms representative baselines across various evaluation metrics while also simplifying training. Our findings highlight the effectiveness of sequence-level visual conditioning and demonstrate the potential of pre-trained models for controllable animation without architectural changes.

Multi-task learning has the potential to improve generalization by maximizing positive transfer between tasks while reducing task interference. Fully achieving this potential is hindered by manually designed architectures that remain static throughout training. On the contrary, learning in the brain occurs through structural changes that are in tandem with changes in synaptic strength. Thus, we propose Multi-Task Structural Learning (MTSL) that simultaneously learns the multi-task architecture and its parameters. MTSL begins with an identical single-task network for each task and alternates between a task-learning phase and a structural-learning phase. In the task learning phase, each network specializes in the corresponding task. In each of the structural learning phases, starting from the earliest layer, locally similar task layers first transfer their knowledge to a newly created group layer before being removed. MTSL then uses the group layer in place of the corresponding removed task layers and moves on to the next layers. Our empirical results show that MTSL achieves competitive generalization with various baselines and improves robustness to out-of-distribution data.

With the emerging of huge amount of unlabeled data, unsupervised out-of-distribution (OOD) detection is vital for ensuring the reliability of graph neural networks (GNNs) by identifying OOD samples from in-distribution (ID) ones during testing, where encountering novel or unknown data is inevitable. Existing methods often suffer from compromised performance due to redundant information in graph structures, which impairs their ability to effectively differentiate between ID and OOD data. To address this challenge, we propose SEGO, an unsupervised framework that integrates structural entropy into OOD detection regarding graph classification. Specifically, within the architecture of contrastive learning, SEGO introduces an anchor view in the form of coding tree by minimizing structural entropy. The obtained coding tree effectively removes redundant information from graphs while preserving essential structural information, enabling the capture of distinct graph patterns between ID and OOD samples. Furthermore, we present a multi-grained contrastive learning scheme at local, global, and tree levels using triplet views, where coding trees with essential information serve as the anchor view. Extensive experiments on real-world datasets validate the effectiveness of SEGO, demonstrating superior performance over state-of-the-art baselines in OOD detection. Specifically, our method achieves the best performance on 9 out of 10 dataset pairs, with an average improvement of 3.7\% on OOD detection datasets, significantly surpassing the best competitor by 10.8\% on the FreeSolv/ToxCast dataset pair.

The optimization of long-horizon agents increasingly relies on reflection-based mechanisms, where a large language model (LLM) acts as an optimizer to diagnose agent failures and improve agent policies. However, real execution traces are difficult to use directly for optimization: large trace collections are often redundant and heterogeneous, making optimization inefficient and prone to overfitting to low-value failures; meanwhile, each individual trajectory also contains many irrelevant steps, while naive context reduction methods such as truncation or sliding windows can discard causally important evidence and produce misleading optimization signals. To resolve this dilemma, we introduce STRACE (Structural TRajectory Analysis and Causal Extraction), a framework that constructs high signal-noise optimization contexts for more precise and effective optimization. At the batch level, STRACE mines failure patterns to filter redundant traces and retain representative failures; within each selected trace, it performs causal localization over a textual dependency graph to remove non-causal steps and identify the true root-cause module for optimization. Empirical results demonstrate that STRACE significantly outperforms standard context-filtering baselines. Notably, on a challenging formal verification task (VeruSAGE-Bench), it successfully optimizes human-expert designed agents, delivering 1.4times success-rate improvement (42.5% to 58.5%). The code is available at https://github.com/moomight/STRACE .

Existing encoder-free vision-language models (VLMs) are rapidly narrowing the performance gap with their encoder-based counterparts, highlighting the promising potential for unified multimodal systems with structural simplicity and efficient deployment. We systematically clarify the performance gap between VLMs using pre-trained vision encoders, discrete tokenizers, and minimalist visual layers from scratch, deeply excavating the under-examined characteristics of encoder-free VLMs. We develop efficient strategies for encoder-free VLMs that rival mainstream encoder-based ones. After an in-depth investigation, we launch EVEv2.0, a new and improved family of encoder-free VLMs. We show that: (i) Properly decomposing and hierarchically associating vision and language within a unified model reduces interference between modalities. (ii) A well-designed training strategy enables effective optimization for encoder-free VLMs. Through extensive evaluation, our EVEv2.0 represents a thorough study for developing a decoder-only architecture across modalities, demonstrating superior data efficiency and strong vision-reasoning capability. Code is publicly available at: https://github.com/baaivision/EVE.

Creating a vivid video from the event or scenario in our imagination is a truly fascinating experience. Recent advancements in text-to-video synthesis have unveiled the potential to achieve this with prompts only. While text is convenient in conveying the overall scene context, it may be insufficient to control precisely. In this paper, we explore customized video generation by utilizing text as context description and motion structure (e.g. frame-wise depth) as concrete guidance. Our method, dubbed Make-Your-Video, involves joint-conditional video generation using a Latent Diffusion Model that is pre-trained for still image synthesis and then promoted for video generation with the introduction of temporal modules. This two-stage learning scheme not only reduces the computing resources required, but also improves the performance by transferring the rich concepts available in image datasets solely into video generation. Moreover, we use a simple yet effective causal attention mask strategy to enable longer video synthesis, which mitigates the potential quality degradation effectively. Experimental results show the superiority of our method over existing baselines, particularly in terms of temporal coherence and fidelity to users' guidance. In addition, our model enables several intriguing applications that demonstrate potential for practical usage.

Layered image assets are widely used in real-world creative workflows, enabling non-destructive iteration and flexible re-composition. Recent advances in layered image generation and decomposition synthesize or recover layered representations, yet controllable editing of layered images remains challenging. Manual editing requires careful coordination across layers to maintain consistent illumination and contact, while AI-based pipelines collapse layers into a flattened image for editing, then decompose them again, introducing background-to-foreground leakage and unstable transparency. To address these limitations, we propose LimeCross, a training-free context-conditioned layered image editing framework that edits user-selected RGBA layers according to text while keeping the remaining layers unchanged. It leverages contextual cues from other layers using a bi-stream attention mechanism to preserve cross-layer consistency, while explicitly maintaining layer integrity to prevent the contamination of edited layers. To evaluate our approach, we introduce LayerEditBench, a benchmark of 1500 layered scenes with paired source/target prompts, along with evaluation protocols that assess both edit fidelity and alpha channel stability. Extensive experiments demonstrate that LimeCross improves layer purity and composite realism over strong editing baselines, establishing context-conditioned layered editing as a principled framework for controllable generative creation.

Aspect-level sentiment analysis aims to determine the sentiment polarity towards a specific target in a sentence. The main challenge of this task is to effectively model the relation between targets and sentiments so as to filter out noisy opinion words from irrelevant targets. Most recent efforts capture relations through target-sentiment pairs or opinion spans from a word-level or phrase-level perspective. Based on the observation that targets and sentiments essentially establish relations following the grammatical hierarchy of phrase-clause-sentence structure, it is hopeful to exploit comprehensive syntactic information for better guiding the learning process. Therefore, we introduce the concept of Scope, which outlines a structural text region related to a specific target. To jointly learn structural Scope and predict the sentiment polarity, we propose a hybrid graph convolutional network (HGCN) to synthesize information from constituency tree and dependency tree, exploring the potential of linking two syntax parsing methods to enrich the representation. Experimental results on four public datasets illustrate that our HGCN model outperforms current state-of-the-art baselines.

Modern large language models (LLMs) are inherently auto-regressive, requiring input to be serialized into flat sequences regardless of their structural dependencies. This serialization hinders the model's ability to leverage structural inductive biases, especially in tasks such as retrieval-augmented generation (RAG) and reasoning on data with native graph structures, where inter-segment dependencies are crucial. We introduce Graph-KV with the potential to overcome this limitation. Graph-KV leverages the KV-cache of text segments as condensed representations and governs their interaction through structural inductive biases. In this framework, 'target' segments selectively attend only to the KV-caches of their designated 'source' segments, rather than all preceding segments in a serialized sequence. This approach induces a graph-structured block mask, sparsifying attention and enabling a message-passing-like step within the LLM. Furthermore, strategically allocated positional encodings for source and target segments reduce positional bias and context window consumption. We evaluate Graph-KV across three scenarios: (1) seven RAG benchmarks spanning direct inference, multi-hop reasoning, and long-document understanding; (2) Arxiv-QA, a novel academic paper QA task with full-text scientific papers structured as citation ego-graphs; and (3) paper topic classification within a citation network. By effectively reducing positional bias and harnessing structural inductive biases, Graph-KV substantially outperforms baselines, including standard costly sequential encoding, across various settings. Code and the Graph-KV data are publicly available.

Native 3D generative models have achieved remarkable fidelity and speed, yet they suffer from a critical limitation: inability to prescribe precise structural articulations, where precise structural control within the native 3D space remains underexplored. This paper proposes SK-Adapter, a simple and yet highly efficient and effective framework that unlocks precise skeletal manipulation for native 3D generation. Moving beyond text or image prompts, which can be ambiguous for precise structure, we treat the 3D skeleton as a first-class control signal. SK-Adapter is a lightweight structural adapter network that encodes joint coordinates and topology into learnable tokens, which are injected into the frozen 3D generation backbone via cross-attention. This smart design allows the model to not only effectively "attend" to specific 3D structural constraints but also preserve its original generative priors. To bridge the data gap, we contribute Objaverse-TMS dataset, a large-scale dataset of 24k text-mesh-skeleton pairs. Extensive experiments confirm that our method achieves robust structural control while preserving the geometry and texture quality of the foundation model, significantly outperforming existing baselines. Furthermore, we extend this capability to local 3D editing, enabling the region specific editing of existing assets with skeletal guidance, which is unattainable by previous methods. Project Page: https://sk-adapter.github.io/

Sign-based optimization algorithms, such as SignSGD, have garnered significant attention for their remarkable performance in distributed learning and training large foundation models. Despite their empirical superiority, SignSGD is known to diverge on non-smooth objectives, which are ubiquitous in modern machine learning due to ReLUs, max-pools, and mixture-of-experts. To overcome this fundamental limitation, we propose StoSignSGD, an algorithm that injects structural stochasticity into the sign operator while maintaining an unbiased update step. In the regime of (online) convex optimization, our theoretical analysis shows that StoSignSGD rigorously resolves the non-convergence issues of SignSGD, achieving a sharp convergence rate matching the lower bound. For the more challenging non-convex non-smooth optimization, we introduce generalized stationary measures that encompass prior definitions, proving that StoSignSGD improves upon the best-known complexity bounds by dimensional factors. Empirically, StoSignSGD exhibits robust stability and superior efficiency across diverse large language model (LLM) training regimes. Notably, in low-precision FP8 pretraining -- a setting where AdamW fails catastrophically -- StoSignSGD remains highly stable and yields a remarkable 1.44times to 2.14times speedup relative to established baselines. Furthermore, when fine-tuning 7B LLMs on mathematical reasoning tasks, StoSignSGD delivers substantial performance gains over both AdamW and SignSGD. Finally, to dissect the mechanisms driving its success, we develop a sign conversion framework capable of transforming any general optimizer into its unbiased, sign-based counterpart. Utilizing this framework, we deconstruct the core components of StoSignSGD and present a comprehensive ablation study to empirically validate our algorithmic design choices.

Human-level contact-rich manipulation relies on the distinct roles of two key modalities: vision provides spatially rich but temporally slow global context, while force sensing captures rapid, high-frequency local contact dynamics. Integrating these signals is challenging due to their fundamental frequency and informational disparities. In this work, we propose ImplicitRDP, a unified end-to-end visual-force diffusion policy that integrates visual planning and reactive force control within a single network. We introduce Structural Slow-Fast Learning, a mechanism utilizing causal attention to simultaneously process asynchronous visual and force tokens, allowing the policy to perform closed-loop adjustments at the force frequency while maintaining the temporal coherence of action chunks. Furthermore, to mitigate modality collapse where end-to-end models fail to adjust the weights across different modalities, we propose Virtual-target-based Representation Regularization. This auxiliary objective maps force feedback into the same space as the action, providing a stronger, physics-grounded learning signal than raw force prediction. Extensive experiments on contact-rich tasks demonstrate that ImplicitRDP significantly outperforms both vision-only and hierarchical baselines, achieving superior reactivity and success rates with a streamlined training pipeline. Code and videos will be publicly available at https://implicit-rdp.github.io.

Reinforcement learning with verifiable rewards (RLVR) is central to training modern reasoning models, but the undisclosed training data raises concerns about benchmark contamination. Unlike pretraining methods, which optimize models using token-level probabilities, RLVR fine-tunes models based on reward feedback from self-generated reasoning trajectories, making conventional likelihood-based detection methods less effective. We show that RLVR induces a distinctive behavioral signature: prompts encountered during RLVR training result in more rigid and similar generations, while unseen prompts retain greater diversity. We introduce Min-kNN Distance, a simple black-box detector that quantifies this collapse by sampling multiple completions for a given prompt and computing the average of the k smallest nearest-neighbor edit distances. Min-kNN Distance requires no access to the reference model or token probabilities. Experiments across multiple RLVR-trained reasoning models show that Min-kNN Distance reliably distinguishes RL-seen examples from unseen ones and outperforms existing membership inference and RL contamination detection baselines.

Mixture-of-Experts (MoE) models have become a leading approach for decoupling parameter count from computational cost in large language models, yet effectively scaling MoE performance remains a challenge. Prior work shows that fine-grained experts enlarge the space of expert combinations and improve flexibility, but they also impose substantial routing overhead, creating a new scalability bottleneck. In this paper, we explore a complementary axis for scaling -- how expert outputs are aggregated. We theoretically show that replacing the standard weighted-summation aggregation with structural aggregation expands the expert-combination space without altering the experts or router, and enables possible multi-step reasoning within a single MoE layer. To this end, we propose DAG-MoE, a sparse MoE framework that employs a lightweight module to automatically learn the optimal aggregation structure among the selected experts. Extensive experiments under standard language modeling settings show that DAG-MoE consistently improves performance in both pretraining and fine-tuning, surpassing traditional MoE baselines.

LLM agents increasingly rely on reusable skills, capability packages that combine instructions, control flow, constraints, and tool calls. In most current agent systems, however, skills are still represented by text-heavy artifacts, including SKILL.md-style documents and structured records whose machine-usable evidence remains embedded largely in natural-language descriptions. This poses a challenge for skill-centered agent systems: managing skill collections and using skills to support agent both require reasoning over invocation interfaces, execution structure, and concrete side effects that are often entangled in a single textual surface. An explicit representation of skill knowledge may therefore help make these artifacts easier for machines to acquire and leverage. Drawing on Memory Organization Packets, Script Theory, and Conceptual Dependency from Schank and Abelson's classical work on linguistic knowledge representation, we introduce what is, to our knowledge, the first structured representation for agent skill artifacts that disentangles skill-level scheduling signals, scene-level execution structure, and logic-level action and resource-use evidence: the Scheduling-Structural-Logical (SSL) representation. We instantiate SSL with an LLM-based normalizer and evaluate it on a corpus of skills in two tasks, Skill Discovery and Risk Assessment, and superiorly outperform the text-only baselines: in Skill Discovery, SSL improves MRR from 0.573 to 0.707; in Risk Assessment, it improves macro F1 from 0.744 to 0.787. These findings reveal that explicit, source-grounded structure makes agent skills easier to search and review. They also suggest that SSL is best understood as a practical step toward more inspectable, reusable, and operationally actionable skill representations for agent systems, rather than as a finished standard or an end-to-end mechanism for managing and using skills.

Relational Databases (RDBs) are the backbone of modern business, yet they lack foundation models comparable to those in text or vision. A key obstacle is that high-quality RDBs are private, scarce and structurally heterogeneous, making internet-scale pre-training infeasible. To overcome this data scarcity, We introduce RDB-PFN, the first relational foundation model trained purely via synthetic data. Inspired by Prior-Data Fitted Networks (PFNs) where synthetic data generated from Structural Causal Models (SCMs) enables reasoning on single tables, we design a Relational Prior Generator to create an infinite stream of diverse RDBs from scratch. Pre-training on over 2 million synthetic single-table and relational tasks, RDB-PFN learns to adapt to any new database instantly via genuine in-context learning. Experiments verify RDB-PFN achieves strong few-shot performance on 19 real-world relational prediction tasks, outperforming graph-based and single-table foundation-model baselines (given the same DFS-linearized inputs), while using a lightweight architecture and fast inference. The code is available at https://github.com/MuLabPKU/RDBPFN

Industrial maintenance environments increasingly rely on AI systems to assist operators in understanding asset behavior, diagnosing failures, and evaluating interventions. Although large language models (LLMs) enable fluent natural-language interaction, deployed maintenance assistants routinely produce generic explanations that are weakly grounded in telemetry, omit verifiable provenance, and offer no testable support for counterfactual or action-oriented reasoning that undermine trust in safety-critical settings. We present IndustryAssetEQA, a neurosymbolic operational intelligence system that combines episodic telemetry representations with a Failure Mode Effects Analysis Knowledge Graph (FMEA-KG) to enable Embodied Question Answering (EQA) over industrial assets. We evaluate on four datasets covering four industrial asset types, including rotating machinery, turbofan engines, hydraulic systems, and cyber-physical production systems. Compared to LLM-only baselines, IndustryAssetEQA improves structural validity by up to 0.51, counterfactual accuracy by up to 0.47, and explanation entailment by 0.64, while reducing severe expert-rated overclaims from 28% to 2% (approximately 93% reduction). Code, datasets, and the FMEA-KG are available at https://github.com/IBM/AssetOpsBench/tree/IndustryAssetEQA/IndustryAssetEQA.

Domain models are central to software engineering, as they enable a shared understanding, guide implementation, and support automated analyses and model-driven development. Yet, despite these benefits, practitioners often skip modeling because it is time-consuming and demands scarce expertise. We address this barrier by investigating whether open-weight large language models, adapted via instruction tuning, can generate high-quality BPMN process models directly from natural language descriptions in a cost-effective and privacy-preserving way. We introduce InstruBPM, a reproducible approach that prepares paired text-diagram data and instruction tunes an open source large language model with parameter-efficient fine-tuning and quantization for on-prem deployment. We evaluate the tuned model through complementary perspectives: (i) text/code similarity using BLEU, ROUGE-L, and METEOR, (ii) structural fidelity using Relative Graph Edit Distance, (iii) guidelines conformance using external tool checks, and (iv) a small expert review. Using a curated subset of a multi-domain BPMN dataset, we compare the tuned model with untuned open-weight baselines and strong proprietary models under consistent prompting regimes. Our compact tuned model outperforms all baselines across sequence and structural metrics while requiring substantially fewer resources; guideline analysis and expert feedback further indicate that the generated diagrams largely follow BPMN best practices and are useful starting points that reduce modeling effort. Overall, instruction tuning improves structural accuracy and robustness compared to untuned baselines and reduces reliance on heavy prompt scaffolding. We publicly share the trained models and scripts to support reproducibility and further research.

Generative video models have significantly advanced the photorealistic synthesis of adverse weather for autonomous driving; however, they consistently demand massive datasets to learn rare weather scenarios. While 3D-aware editing methods alleviate these data constraints by augmenting existing video footage, they are fundamentally bottlenecked by costly per-scene optimization and suffer from inherent geometric and illumination entanglement. In this work, we introduce AutoWeather4D, a feed-forward 3D-aware weather editing framework designed to explicitly decouple geometry and illumination. At the core of our approach is a G-buffer Dual-pass Editing mechanism. The Geometry Pass leverages explicit structural foundations to enable surface-anchored physical interactions, while the Light Pass analytically resolves light transport, accumulating the contributions of local illuminants into the global illumination to enable dynamic 3D local relighting. Extensive experiments demonstrate that AutoWeather4D achieves comparable photorealism and structural consistency to generative baselines while enabling fine-grained parametric physical control, serving as a practical data engine for autonomous driving.

Generative priors in Image Super-Resolution (SR) often compromise faithful restoration, we attribute this limitation to a fundamental spectral misalignment between isotropic objectives and the intrinsic natural image manifold. While Direct Preference Optimization offers a path to alignment, its reliance on spectrally flat Gaussian noise fails to distinguish authentic high-frequency details from hallucinations. To bridge this geometric gap, we propose ASASR, a theoretically grounded framework that recasts the generative flow into a Sobolev-induced Riemannian geometry by explicitly coloring the noise transition kernel to mirror natural spectral decay. Driving this geometric alignment, we integrate a parametric adversary grounded in the Riesz Representation Theorem, which synthesizes targeted negative samples equivalent to worst-case Sobolev gradients to direct optimization along the tangent space of plausible structural failures. Extensive evaluations demonstrate that ASASR outperforms leading generative baselines, particularly in preserving spectral consistency and structural fidelity, offering a robust solution that effectively mitigates artifacts.

This paper presents IMAGGarment-1, a fine-grained garment generation (FGG) framework that enables high-fidelity garment synthesis with precise control over silhouette, color, and logo placement. Unlike existing methods that are limited to single-condition inputs, IMAGGarment-1 addresses the challenges of multi-conditional controllability in personalized fashion design and digital apparel applications. Specifically, IMAGGarment-1 employs a two-stage training strategy to separately model global appearance and local details, while enabling unified and controllable generation through end-to-end inference. In the first stage, we propose a global appearance model that jointly encodes silhouette and color using a mixed attention module and a color adapter. In the second stage, we present a local enhancement model with an adaptive appearance-aware module to inject user-defined logos and spatial constraints, enabling accurate placement and visual consistency. To support this task, we release GarmentBench, a large-scale dataset comprising over 180K garment samples paired with multi-level design conditions, including sketches, color references, logo placements, and textual prompts. Extensive experiments demonstrate that our method outperforms existing baselines, achieving superior structural stability, color fidelity, and local controllability performance. The code and model are available at https://github.com/muzishen/IMAGGarment-1.

This study proposes a behaviorally-informed multi-factor stock selection framework that integrates short-cycle technical alpha signals with deep learning. We design a dual-task multilayer perceptron (MLP) that jointly predicts five-day future returns and directional price movements, thereby capturing nonlinear market behaviors such as volume-price divergence, momentum-driven herding, and bottom reversals. The model is trained on 40 carefully constructed factors derived from price-volume patterns and behavioral finance insights. Empirical evaluation demonstrates that the dual-task MLP achieves superior and stable performance across both predictive accuracy and economic relevance, as measured by information coefficient (IC), information ratio (IR), and portfolio backtesting results. Comparative experiments further show that deep learning methods outperform linear baselines by effectively capturing structural interactions between factors. This work highlights the potential of structure-aware deep learning in enhancing multi-factor modeling and provides a practical framework for short-horizon quantitative investment strategies.

Recent prompt-based image editing models have demonstrated impressive prompt-following capability at structural editing tasks. However, existing models still fail to perform local edits, follow detailed editing prompts, or maintain global image quality beyond a single editing step. To address these challenges, we introduce SPICE, a training-free workflow that accepts arbitrary resolutions and aspect ratios, accurately follows user requirements, and improves image quality consistently during more than 100 editing steps. By synergizing the strengths of a base diffusion model and a Canny edge ControlNet model, SPICE robustly handles free-form editing instructions from the user. SPICE outperforms state-of-the-art baselines on a challenging realistic image-editing dataset consisting of semantic editing (object addition, removal, replacement, and background change), stylistic editing (texture changes), and structural editing (action change) tasks. Not only does SPICE achieve the highest quantitative performance according to standard evaluation metrics, but it is also consistently preferred by users over existing image-editing methods. We release the workflow implementation for popular diffusion model Web UIs to support further research and artistic exploration.

Scalable Vector Graphics (SVG) is a code-based representation for 2D visuals. Leveraging recent advances in large language models (LLMs), we study text-to-SVG generation and address two persistent gaps: weak generalization and poor adherence to input instructions. We present SVGThinker, a reasoning-driven framework that aligns the production of SVG code with the visualization process and supports the full set of SVG primitives. Our pipeline first renders each primitive in sequence and uses a multimodal model to annotate the image and code; we then build stepwise updates that mirror the incremental addition of primitives. On this data, we train an LLM with supervised fine-tuning that exposes its chain-of-thought as intermediate reasoning, improving robustness and reducing errors and hallucinations. Experiments against state-of-the-art baselines show that SVGThinker produces more stable, editable, and higher-quality SVGs while preserving the structural advantages of vector graphics. Unlike image-based methods, our outputs enable precise and hierarchical editing, opening new directions for design, content creation, and automated graphics generation.

Temporal networks have been widely used to model real-world complex systems such as financial systems and e-commerce systems. In a temporal network, the joint neighborhood of a set of nodes often provides crucial structural information useful for predicting whether they may interact at a certain time. However, recent representation learning methods for temporal networks often fail to extract such information or depend on online construction of structural features, which is time-consuming. To address the issue, this work proposes Neighborhood-Aware Temporal network model (NAT). For each node in the network, NAT abandons the commonly-used one-single-vector-based representation while adopting a novel dictionary-type neighborhood representation. Such a dictionary representation records a downsampled set of the neighboring nodes as keys, and allows fast construction of structural features for a joint neighborhood of multiple nodes. We also design a dedicated data structure termed N-cache to support parallel access and update of those dictionary representations on GPUs. NAT gets evaluated over seven real-world large-scale temporal networks. NAT not only outperforms all cutting-edge baselines by averaged 1.2% and 4.2% in transductive and inductive link prediction accuracy, respectively, but also keeps scalable by achieving a speed-up of 4.1-76.7x against the baselines that adopt joint structural features and achieves a speed-up of 1.6-4.0x against the baselines that cannot adopt those features. The link to the code: https: //github.com/Graph-COM/Neighborhood-Aware-Temporal-Network.

Structural fidelity is essential to scientific methodology diagrams. To communicate research logic, these diagrams must faithfully render components, directional relations, and textual annotations. Since a single error, such as a reversed arrow or an unreadable equation, can invalidate the entire figure, structural fidelity is inherently conjunctive: correctness on one axis cannot compensate for failure on another. Current open-source models fail to satisfy this criterion. Supervised fine-tuning (SFT) learns plausible layouts but cannot reliably ensure structural correctness, while scalar reward-based post-training obscures which structural dimension has failed. To address this, we introduce SciForma, a framework for the structure faithful generation of scientific methodology diagrams. Specifically, SciForma decomposes diagram quality into three structural axes: Component, Arrow, and Text, guided by a structural inventory. Built on this foundation, we curate SciFormaData-700K for structured training and SciFormaBench-2K for logic-verified evaluation. To close the gap left by SFT, we develop Multi-Dimensional Conjunctive Preference Optimization (M-DPO), which enforces simultaneous correctness across all axes and adaptively routes gradients to the most deficient dimension in post-training. The same structural inventory also enables iterative editing at inference time to correct residual errors. This combination allows SciForma-9B to exceed all open-source baselines and GPT-Image-1.5 on both SciFormaBench-2K and AIBench, bringing open scientific diagram generation close to proprietary-level structural fidelity. Our code and data will be available at: https://github.com/microsoft/SciForma.

Large Language Models (LLMs) have demonstrated remarkable capabilities in natural language generation and reasoning. However, their integration into automated software ecosystems is often hindered by the "Structure Gap" - the inherent tension between the probabilistic nature of token generation and the deterministic requirements of structured data formats (e.g., JSON, XML). Traditional Supervised Fine-Tuning (SFT) often fails to enforce strict syntactic constraints, leading to "hallucinated" keys or malformed structures, while constrained decoding methods impose significant inference latency. In this paper, we propose a lightweight, efficient Reinforcement Learning (RL) framework to bridge this gap. We introduce a novel Multi-dimensional Reward Function that decomposes the structured output task into a hierarchy of constraints: structural integrity, format correctness, content accuracy, and validity. Leveraging Gradient Regularized Policy Optimization (GRPO), we enable the model to internalize these constraints without the need for a separate critic network, reducing peak VRAM usage by 40% compared to PPO. We validate our approach on multiple tasks, including complex recipe generation and structured math reasoning (GSM8K-JSON). Experimental results demonstrate that our method achieves 89.7% structural accuracy and 92.1% JSON validity, significantly outperforming both zero-shot baselines (e.g., GPT-3.5) and SFT on larger models like LLaMA-3-8B. Furthermore, we provide a detailed analysis of training dynamics, revealing a distinct self-paced curriculum where the model sequentially acquires syntactic proficiency before semantic accuracy. Our model is publicly available at https://huggingface.co/Freakz3z/Qwen-JSON.

Reparameterized diffusion models (RDMs) have recently matched autoregressive methods in protein generation, motivating their use for challenging tasks such as designing membrane proteins, which possess interleaved soluble and transmembrane (TM) regions. We introduce the Membrane Diffusion Language Model (MemDLM), a fine-tuned RDM-based protein language model that enables controllable membrane protein sequence design. MemDLM-generated sequences recapitulate the TM residue density and structural features of natural membrane proteins, achieving comparable biological plausibility and outperforming state-of-the-art diffusion baselines in motif scaffolding tasks by producing lower perplexity, higher BLOSUM-62 scores, and improved pLDDT confidence. To enhance controllability, we develop Per-Token Guidance (PET), a novel classifier-guided sampling strategy that selectively solubilizes residues while preserving conserved TM domains, yielding sequences with reduced TM density but intact functional cores. Importantly, MemDLM designs validated in TOXCAT beta-lactamase growth assays demonstrate successful TM insertion, distinguishing high-quality generated sequences from poor ones. Together, our framework establishes the first experimentally-validated diffusion-based model for rational membrane protein generation, integrating de novo design, motif scaffolding, and targeted property optimization.

Steady-state electrothermal systems involve strongly coupled heat transfer, fluid flow, and electric-potential transport, creating severe numerical challenges for standard physics-informed neural networks (PINNs) due to stark disparities in gradient scales and residual stiffnesses across the physical fields. To resolve these multiphysics bottlenecks, we introduce a Long Short-Term Memory PINN (LSTM-PINN) framework that utilizes a depth-recursive memory mechanism to preserve long-range spatial feature dependencies and maintain strict cross-field consistency. The proposed architecture is rigorously evaluated against conventional and attention-based networks across a unified five-field formulation encompassing four complex convective and drag regimes: Boussinesq electrothermal flow, drift-potential gauge-constrained transport, strong buoyancy-coupled convection, and Brinkman--Forchheimer drift. Quantitative and visual analyses demonstrate that LSTM-PINN successfully suppresses non-physical artifacts and structural distortions, yielding the highest thermodynamic fidelity and consistently outperforming state-of-the-art baselines in global error metrics. Ultimately, this memory-enhanced approach provides a highly robust and accurate computational baseline for capturing localized boundary layers and complex energy-momentum feedback in advanced electrothermal energy systems.

Multimodal models for text-to-image generation have achieved strong visual fidelity, yet they remain brittle under compositional structural constraints-notably generative numeracy, attribute binding, and part-level relations. To address these challenges, we propose Shape-of-Thought (SoT), a visual CoT framework that enables progressive shape assembly via coherent 2D projections without external engines at inference time. SoT trains a unified multimodal autoregressive model to generate interleaved textual plans and rendered intermediate states, helping the model capture shape-assembly logic without producing explicit geometric representations. To support this paradigm, we introduce SoT-26K, a large-scale dataset of grounded assembly traces derived from part-based CAD hierarchies, and T2S-CompBench, a benchmark for evaluating structural integrity and trace faithfulness. Fine-tuning on SoT-26K achieves 88.4% on component numeracy and 84.8% on structural topology, outperforming text-only baselines by around 20%. SoT establishes a new paradigm for transparent, process-supervised compositional generation. The code is available at https://anonymous.4open.science/r/16FE/. The SoT-26K dataset will be released upon acceptance.

Controlling illumination in images is essential for photography and visual content creation. While closed-source models have demonstrated impressive illumination control, open-source alternatives either require heavy control inputs like depth maps or do not release their data and code. We present a fully open-source and reproducible pipeline for learning illumination control in diffusion models. Our approach builds a data engine that transforms well-lit images into supervised training triplets consisting of a poorly-illuminated input image, a natural language lighting instruction, and a well-illuminated output image. We finetune a diffusion model on this data and demonstrate significant improvements over baseline SD 1.5, SDXL, and FLUX.1-dev models in perceptual similarity, structural similarity, and identity preservation. Our work provides a reproducible solution built entirely with open-source tools and publicly available data. We release all our code, data, and model weights publicly.

Multi-domain image-to-image translation re quires grounding semantic differences ex pressed in natural language prompts into corresponding visual transformations, while preserving unrelated structural and seman tic content. Existing methods struggle to maintain structural integrity and provide fine grained, attribute-specific control, especially when multiple domains are involved. We propose LACE (Language-grounded Attribute Controllable Translation), built on two compo nents: (1) a GLIP-Adapter that fuses global semantics with local structural features to pre serve consistency, and (2) a Multi-Domain Control Guidance mechanism that explicitly grounds the semantic delta between source and target prompts into per-attribute translation vec tors, aligning linguistic semantics with domain level visual changes. Together, these modules enable compositional multi-domain control with independent strength modulation for each attribute. Experiments on CelebA(Dialog) and BDD100K demonstrate that LACE achieves high visual fidelity, structural preservation, and interpretable domain-specific control, surpass ing prior baselines. This positions LACE as a cross-modal content generation framework bridging language semantics and controllable visual translation.

Antibodies comprise the most versatile class of binding molecules, with numerous applications in biomedicine. Computational design of antibodies involves generating novel and diverse sequences, while maintaining structural consistency. Unique to antibodies, designing the complementarity-determining region (CDR), which determines the antigen binding affinity and specificity, creates its own unique challenges. Recent deep learning models have shown impressive results, however the limited number of known antibody sequence/structure pairs frequently leads to degraded performance, particularly lacking diversity in the generated sequences. In our work we address this challenge by leveraging Model Reprogramming (MR), which repurposes pretrained models on a source language to adapt to the tasks that are in a different language and have scarce data - where it may be difficult to train a high-performing model from scratch or effectively fine-tune an existing pre-trained model on the specific task. Specifically, we introduce ReprogBert in which a pretrained English language model is repurposed for protein sequence infilling - thus considers cross-language adaptation using less data. Results on antibody design benchmarks show that our model on low-resourced antibody sequence dataset provides highly diverse CDR sequences, up to more than a two-fold increase of diversity over the baselines, without losing structural integrity and naturalness. The generated sequences also demonstrate enhanced antigen binding specificity and virus neutralization ability. Code is available at https://github.com/IBM/ReprogBERT

What fundamental properties of reward functions enable efficient sparse-reward reinforcement learning? We address this question through the lens of low-rank structure in reward matrices, showing that such structure induces a sharp transition from exponential to polynomial sample complexity, the first result of this kind for sparse-reward RL. We introduce Policy-Aware Matrix Completion (PAMC), which connects matrix completion theory with reinforcement learning via a new analysis of policy-dependent sampling. Our framework provides: (i) impossibility results for general sparse reward observation, (ii) reward-free representation learning from dynamics, (iii) distribution-free confidence sets via conformal prediction, and (iv) robust completion guarantees that degrade gracefully when low-rank structure is only approximate. Empirically, we conduct a pre-registered evaluation across 100 systematically sampled domains, finding exploitable structure in over half. PAMC improves sample efficiency by factors between 1.6 and 2.1 compared to strong exploration, structured, and representation-learning baselines, while adding only about 20 percent computational overhead.These results establish structural reward learning as a promising new paradigm, with immediate implications for robotics, healthcare, and other safety-critical, sample-expensive applications.

Existing visual place recognition (VPR) datasets predominantly rely on vehicle-mounted imagery, lack multimodal diversity and underrepresent dense, mixed-use street-level spaces, especially in non-Western urban contexts. To address these gaps, we introduce MMS-VPR, a large-scale multimodal dataset for street-level place recognition in complex, pedestrian-only environments. The dataset comprises 78,575 annotated images and 2,512 video clips captured across 207 locations in a ~70,800 m^2 open-air commercial district in Chengdu, China. Each image is labeled with precise GPS coordinates, timestamp, and textual metadata, and covers varied lighting conditions, viewpoints, and timeframes. MMS-VPR follows a systematic and replicable data collection protocol with minimal device requirements, lowering the barrier for scalable dataset creation. Importantly, the dataset forms an inherent spatial graph with 125 edges, 81 nodes, and 1 subgraph, enabling structure-aware place recognition. We further define two application-specific subsets -- Dataset_Edges and Dataset_Points -- to support fine-grained and graph-based evaluation tasks. Extensive benchmarks using conventional VPR models, graph neural networks, and multimodal baselines show substantial improvements when leveraging multimodal and structural cues. MMS-VPR facilitates future research at the intersection of computer vision, geospatial understanding, and multimodal reasoning. The dataset is publicly available at https://huggingface.co/datasets/Yiwei-Ou/MMS-VPR.

PDEs are central to scientific and engineering modeling, yet designing accurate numerical solvers typically requires substantial mathematical expertise and manual tuning. Recent neural network-based approaches improve flexibility but often demand high computational cost and suffer from limited interpretability. We introduce AutoNumerics, a multi-agent framework that autonomously designs, implements, debugs, and verifies numerical solvers for general PDEs directly from natural language descriptions. Unlike black-box neural solvers, our framework generates transparent solvers grounded in classical numerical analysis. We introduce a coarse-to-fine execution strategy and a residual-based self-verification mechanism. Experiments on 24 canonical and real-world PDE problems demonstrate that AutoNumerics achieves competitive or superior accuracy compared to existing neural and LLM-based baselines, and correctly selects numerical schemes based on PDE structural properties, suggesting its viability as an accessible paradigm for automated PDE solving.

Large Language Models (LLMs) perform well in language tasks but often lack collaborative awareness and struggle to optimize global performance in multi-agent settings. We present a reinforcement learning-augmented LLM agent framework that formulates cooperation as a decentralized partially observable Markov decision process (Dec-POMDP) and adopts centralized training with decentralized execution (CTDE). We introduce Group Relative Policy Optimization (GRPO) to jointly optimize agent policies with access to global signals during training, together with a simplified joint reward that balances task quality, speed, and coordination cost. On collaborative writing and coding benchmarks, our framework delivers a 3x increase in task processing speed over single-agent baselines, 98.7% structural/style consistency in writing, and a 74.6% test pass rate in coding. The approach consistently outperforms strong multi-agent LLM baselines and provides a practical path toward reliable collaboration in complex workflows.

Biological processes, functions, and properties are intricately linked to the ensemble of protein conformations, rather than being solely determined by a single stable conformation. In this study, we have developed P2DFlow, a generative model based on SE(3) flow matching, to predict the structural ensembles of proteins. We specifically designed a valuable prior for the flow process and enhanced the model's ability to distinguish each intermediate state by incorporating an additional dimension to describe the ensemble data, which can reflect the physical laws governing the distribution of ensembles, so that the prior knowledge can effectively guide the generation process. When trained and evaluated on the MD datasets of ATLAS, P2DFlow outperforms other baseline models on extensive experiments, successfully capturing the observable dynamic fluctuations as evidenced in crystal structure and MD simulations. As a potential proxy agent for protein molecular simulation, the high-quality ensembles generated by P2DFlow could significantly aid in understanding protein functions across various scenarios. Code is available at https://github.com/BLEACH366/P2DFlow

Language models pretrained on large collections of tabular data have demonstrated their effectiveness in several downstream tasks. However, many of these models do not take into account the row/column permutation invariances, hierarchical structure, etc. that exist in tabular data. To alleviate these limitations, we propose HYTREL, a tabular language model, that captures the permutation invariances and three more structural properties of tabular data by using hypergraphs - where the table cells make up the nodes and the cells occurring jointly together in each row, column, and the entire table are used to form three different types of hyperedges. We show that HYTREL is maximally invariant under certain conditions for tabular data, i.e., two tables obtain the same representations via HYTREL iff the two tables are identical up to permutations. Our empirical results demonstrate that HYTREL consistently outperforms other competitive baselines on four downstream tasks with minimal pretraining, illustrating the advantages of incorporating the inductive biases associated with tabular data into the representations. Finally, our qualitative analyses showcase that HYTREL can assimilate the table structures to generate robust representations for the cells, rows, columns, and the entire table.

Previous works on Treatment Effect Estimation (TEE) are not in widespread use because they are predominantly theoretical, where strong parametric assumptions are made but untractable for practical application. Recent work uses multilayer perceptron (MLP) for modeling casual relationships, however, MLPs lag far behind recent advances in ML methodology, which limits their applicability and generalizability. To extend beyond the single domain formulation and towards more realistic learning scenarios, we explore model design spaces beyond MLPs, i.e., transformer backbones, which provide flexibility where attention layers govern interactions among treatments and covariates to exploit structural similarities of potential outcomes for confounding control. Through careful model design, Transformers as Treatment Effect Estimators (TransTEE) is proposed. We show empirically that TransTEE can: (1) serve as a general purpose treatment effect estimator that significantly outperforms competitive baselines in a variety of challenging TEE problems (e.g., discrete, continuous, structured, or dosage-associated treatments) and is applicable to both when covariates are tabular and when they consist of structural data (e.g., texts, graphs); (2) yield multiple advantages: compatibility with propensity score modeling, parameter efficiency, robustness to continuous treatment value distribution shifts, explainable in covariate adjustment, and real-world utility in auditing pre-trained language models

Real-world information needs require access to structurally diverse knowledge sources, from unstructured text and relational tables to knowledge graphs and property graphs. Existing retrievers, however, operate over one source at a time under a fixed query language, leaving the broader landscape of available knowledge fragmented behind incompatible interfaces. A natural attempt at unification would collapse these sources into a shared space, but this erases the structural affordances (such as schemas, ontologies, compositional operators) that give each source its expressive power. Effective retrieval over diverse knowledge, therefore, requires not homogenization but an overarching layer that meets each source on its own terms. To achieve this, we present OmniRetrieval, a framework that takes any natural-language query, identifies appropriate knowledge sources, and dispatches source-native queries to their native execution engines. Across an extensive benchmark spanning 13 datasets and 309 distinct knowledge bases over text, relational, and graph-structured sources, OmniRetrieval exceeds single-source baselines, demonstrating that it can serve as a general-purpose interface to the heterogeneous sources while preserving the structural distinctions that make each source valuable.

Standard unlearning evaluations measure behavioral suppression in full precision, immediately after training, despite every deployed language model being quantized first. Recent work has shown that 4-bit post-training quantization can reverse machine unlearning; we show this is not a tuning artefact but a systematic dual failure: gradient-based methods that achieve meaningful forgetting lose it under compression, while methods that survive quantization barely change the model. Both failures trace to the same root cause: across all baselines, per-parameter updates lie 47-828x below the NF4 quantization bin width; updates diffused across billions of parameters cannot clear quantization bin boundaries, a consequence we formalize as a sparsity-permanence tradeoff. We present MANSU (Mechanistic-Aligned Null-Space Unlearning), which resolves both modes by combining causal circuit attribution to isolate the minimal forget-set subgraph, circuit-restricted null-space projection with a diagonal-Fisher retain bound, and a per-parameter magnitude floor guaranteeing quantization survival by construction. We additionally introduce Circuit Attribution Divergence (CAD), a mechanistic verification metric distinguishing structural erasure from behavioral suppression, a distinction existing metrics cannot make. Across multiple model families and hazard benchmarks, MANSU is the first method to jointly satisfy all four properties with margin on each (meaningful forgetting, retain preservation, non-positive PTQ gap, and structural erasure), while gradient-based baselines recover up to +0.05 accuracy under compression.

The advent of Intelligent Tutoring Systems (ITSs) has marked a paradigm shift in education, enabling highly personalized learning pathways. However, true personalization requires adapting to learners' complex knowledge states (multi-source) and diverse goals (multi-sink); existing ITSs often lack the necessary structural-reasoning capability and knowledge dynamism to generate genuinely effective learning paths, and they lack scientifically rigorous validation paradigms. In this paper we propose GraphMASAL (A Graph-based Multi-Agent System for Adaptive Learning), which integrates (i) a dynamic knowledge graph for persistent, stateful learner modeling; (ii) a LangGraph-orchestrated trio of agents (Diagnostician, Planner, Tutor); (iii) a knowledge-graph-grounded two-stage neural IR component (dual-encoder dense retrieval with cross-encoder listwise re-ranking and calibrated score fusion); and (iv) a multi-source multi-sink (MSMS) planning engine with a cognitively grounded cost and an approximation guarantee via greedy set cover. Under blinded automated evaluations with matched inputs and inference settings across diverse student profiles, GraphMASAL consistently outperforms LLM prompting and structured ablations in planning--achieving stronger structural/sequence alignment of learning paths, higher coverage of weak concepts, and lower learning cost--while also surpassing prompt-based baselines in cognitive diagnosis. Agreement with expert/LLM-proxy ratings further supports the validity of our evaluation protocol. These findings indicate that grounding LLM agents in a dynamic knowledge graph, coupled with optimization under educational constraints, yields reliable, interpretable, and pedagogically plausible learning plans, advancing personalized and goal-oriented education.

While Transformer architectures have demonstrated impressive scalability across domains, they continue to face challenges in long-context reasoning, computational efficiency, and structural generalization - largely due to rigid layer stacking, dense attention, and reliance on positional encodings. We present ReSSFormer, a Recursive Sparse Structured Transformer that integrates three complementary innovations: Recurrent Reasoning & Memory Unit (R2MU) for iterative reasoning with bounded depth, Adaptive Sparse Attention Module (ASAM) for efficient and focused context selection, and Self-Organizing Encoder Structure (SOES) for position-free structure induction. ReSSFormer replaces conventional depth stacking with recurrent inference, substitutes full attention with token- and expert-level sparsity, and models latent token topology directly from content. Across language modeling, multi-hop QA, and structure-sensitive tasks, ReSSFormer consistently outperforms strong baselines under comparable FLOPs and parameter budgets, highlighting its scalability, efficiency, and structural flexibility.

The effects of ligand binding on protein structures and their in vivo functions carry numerous implications for modern biomedical research and biotechnology development efforts such as drug discovery. Although several deep learning (DL) methods and benchmarks designed for protein-ligand docking have recently been introduced, to date no prior works have systematically studied the behavior of the latest docking and structure prediction methods within the broadly applicable context of (1) using predicted (apo) protein structures for docking (e.g., for applicability to new proteins); (2) binding multiple (cofactor) ligands concurrently to a given target protein (e.g., for enzyme design); and (3) having no prior knowledge of binding pockets (e.g., for generalization to unknown pockets). To enable a deeper understanding of docking methods' real-world utility, we introduce PoseBench, the first comprehensive benchmark for broadly applicable protein-ligand docking. PoseBench enables researchers to rigorously and systematically evaluate DL methods for apo-to-holo protein-ligand docking and protein-ligand structure prediction using both primary ligand and multi-ligand benchmark datasets, the latter of which we introduce for the first time to the DL community. Empirically, using PoseBench, we find that (1) DL co-folding methods generally outperform comparable conventional and DL docking baselines, yet popular methods such as AlphaFold 3 are still challenged by prediction targets with novel protein sequences; (2) certain DL co-folding methods are highly sensitive to their input multiple sequence alignments, while others are not; and (3) DL methods struggle to strike a balance between structural accuracy and chemical specificity when predicting novel or multi-ligand protein targets. Code, data, tutorials, and benchmark results are available at https://github.com/BioinfoMachineLearning/PoseBench.

Within twelve days of launch, an AI-native social platform exhibits extreme attention concentration, hierarchical role separation, and one-way attention flow, consistent with the hypothesis that stratification in agent ecosystems can emerge rapidly rather than gradually. We analyse publicly observable traces from a 12-day window of Moltbook (28 January -- 8 February 2026), comprising 20,040 posts and 192,410 comments from 15,083 accounts across 759 submolts. We construct co-participation and directed-comment graphs and report reciprocity, community structure, and centrality, alongside descriptive content themes. Under a commenter--post-author tie definition, interaction is strongly asymmetric (reciprocity ~1%), and HITS centrality separates cleanly into hub and authority roles, consistent with broadcast-style attention rather than mutual exchange. Engagement is highly unequal: attention is far more concentrated than production (upvote Gini = 0.992 vs. posting Gini = 0.601), and early-arriving accounts accumulate substantially higher cumulative upvotes prior to exposure-time correction, suggesting rich-get-richer dynamics. Participation is brief and bursty (median observed lifespan 2.48 minutes; 54.8% of posts occur within six peak UTC hours). Embedding-based topic modelling identifies diverse thematic clusters, including technical discussion of memory and identity, onboarding messages, and formulaic token-minting content. These results provide an early structural baseline for large-scale agent--agent social interaction and suggest that familiar forms of hierarchy, amplification, and role differentiation can arise on compressed timescales in agent-facing platforms.

Machine learning demand forecasts optimize statistical accuracy yet leave excess operational volatility that inflates safety stock and amplifies the Bullwhip effect. We introduce Contextual Deconvolution (CD), a two-stage estimator that reframes demand sensing as a convex decomposition: a kernel-modulated banded operator separates transient promotion-driven shocks from a smooth structural baseline, and hierarchical partial pooling enables catalog-scale deployment without per-SKU training. The operator is data-derived, not imposed---it reduces to the identity wherever the promotional response is impulsive (most of M5, all of Favorita) and contributes only where genuine multi-day carryover exists, so the gains rest on the structural decomposition itself. Evaluating strictly out-of-sample on 30,490 M5 SKUs and 2,845 Favorita items, with calendar-aware baselines given CD's identical future calendar, we anchor the contribution on a full inventory-cost accounting: CD lowers safety stock, holding cost, and order variance but under-provisions event spikes, reducing total cost only when holding costs exceed sim20\% of stockout costs (95\% CI [17%,25%]); otherwise it is an operational-stability and inventory-capital layer, not an expected-cost minimizer. Its accuracy contribution is reliability rather than central tendency: across eleven baselines, CD attains the lowest cross-sectional dispersion of per-SKU error and mis-forecasts by more than 200\% on 0.8\% of SKUs versus 9.9--20.6\% for every baseline, ranking first on both in all four M5 draws. Because the Variance Ratio and std-based safety stock are minimized by any sufficiently smooth forecast, we treat them as diagnostics, not objectives. A supporting analysis shows the learned demand operators are non-normal, yet CD's compact parametric kernel matches their operational performance interpretably.

In this position paper, we argue that human baselines in foundation model evaluations must be more rigorous and more transparent to enable meaningful comparisons of human vs. AI performance, and we provide recommendations and a reporting checklist towards this end. Human performance baselines are vital for the machine learning community, downstream users, and policymakers to interpret AI evaluations. Models are often claimed to achieve "super-human" performance, but existing baselining methods are neither sufficiently rigorous nor sufficiently well-documented to robustly measure and assess performance differences. Based on a meta-review of the measurement theory and AI evaluation literatures, we derive a framework with recommendations for designing, executing, and reporting human baselines. We synthesize our recommendations into a checklist that we use to systematically review 115 human baselines (studies) in foundation model evaluations and thus identify shortcomings in existing baselining methods; our checklist can also assist researchers in conducting human baselines and reporting results. We hope our work can advance more rigorous AI evaluation practices that can better serve both the research community and policymakers. Data is available at: https://github.com/kevinlwei/human-baselines

While Multi-Agent Systems (MAS) are increasingly deployed for complex workflows, their emergent properties-particularly the accumulation of bias-remain poorly understood. Because real-world MAS are too complex to analyze entirely, evaluating their ethical robustness requires first isolating their foundational mechanics. In this work, we conduct a baseline empirical study investigating how basic MAS topologies and feedback loops influence prejudice. Contrary to the assumption that multi-agent collaboration naturally dilutes bias, we hypothesize that structured workflows act as echo chambers, amplifying minor stochastic biases into systemic polarization. To evaluate this, we introduce Discrim-Eval-Open, an open-ended benchmark that bypasses individual model neutrality through forced comparative judgments across demographic groups. Analyzing bias cascades across various structures reveals that architectural sophistication frequently exacerbates bias rather than mitigating it. We observe systemic amplification even when isolated agents operate neutrally, and identify a 'Trigger Vulnerability' where injecting purely objective context drastically accelerates polarization. By stripping away advanced swarm complexity to study foundational dynamics, we establish a crucial baseline: structural complexity does not guarantee ethical robustness. Our code is available at https://github.com/weizhihao1/MAS-Bias.

Understanding visually-rich business documents to extract structured data and automate business workflows has been receiving attention both in academia and industry. Although recent multi-modal language models have achieved impressive results, we find that existing benchmarks do not reflect the complexity of real documents seen in industry. In this work, we identify the desiderata for a more comprehensive benchmark and propose one we call Visually Rich Document Understanding (VRDU). VRDU contains two datasets that represent several challenges: rich schema including diverse data types as well as hierarchical entities, complex templates including tables and multi-column layouts, and diversity of different layouts (templates) within a single document type. We design few-shot and conventional experiment settings along with a carefully designed matching algorithm to evaluate extraction results. We report the performance of strong baselines and offer three observations: (1) generalizing to new document templates is still very challenging, (2) few-shot performance has a lot of headroom, and (3) models struggle with hierarchical fields such as line-items in an invoice. We plan to open source the benchmark and the evaluation toolkit. We hope this helps the community make progress on these challenging tasks in extracting structured data from visually rich documents.

Interest in neural machine translation has grown rapidly as its effectiveness has been demonstrated across language and data scenarios. New research regularly introduces architectural and algorithmic improvements that lead to significant gains over "vanilla" NMT implementations. However, these new techniques are rarely evaluated in the context of previously published techniques, specifically those that are widely used in state-of-theart production and shared-task systems. As a result, it is often difficult to determine whether improvements from research will carry over to systems deployed for real-world use. In this work, we recommend three specific methods that are relatively easy to implement and result in much stronger experimental systems. Beyond reporting significantly higher BLEU scores, we conduct an in-depth analysis of where improvements originate and what inherent weaknesses of basic NMT models are being addressed. We then compare the relative gains afforded by several other techniques proposed in the literature when starting with vanilla systems versus our stronger baselines, showing that experimental conclusions may change depending on the baseline chosen. This indicates that choosing a strong baseline is crucial for reporting reliable experimental results.

This report presents the dataset and the evaluation setup of the Sound Event Localization & Detection (SELD) task for the DCASE 2020 Challenge. The SELD task refers to the problem of trying to simultaneously classify a known set of sound event classes, detect their temporal activations, and estimate their spatial directions or locations while they are active. To train and test SELD systems, datasets of diverse sound events occurring under realistic acoustic conditions are needed. Compared to the previous challenge, a significantly more complex dataset was created for DCASE 2020. The two key differences are a more diverse range of acoustical conditions, and dynamic conditions, i.e. moving sources. The spatial sound scenes are created using real room impulse responses captured in a continuous manner with a slowly moving excitation source. Both static and moving sound events are synthesized from them. Ambient noise recorded on location is added to complete the generation of scene recordings. A baseline SELD method accompanies the dataset, based on a convolutional recurrent neural network, to provide benchmark scores for the task. The baseline is an updated version of the one used in the previous challenge, with input features and training modifications to improve its performance.

We investigate the problem of producing structured graph representations of visual scenes. Our work analyzes the role of motifs: regularly appearing substructures in scene graphs. We present new quantitative insights on such repeated structures in the Visual Genome dataset. Our analysis shows that object labels are highly predictive of relation labels but not vice-versa. We also find that there are recurring patterns even in larger subgraphs: more than 50% of graphs contain motifs involving at least two relations. Our analysis motivates a new baseline: given object detections, predict the most frequent relation between object pairs with the given labels, as seen in the training set. This baseline improves on the previous state-of-the-art by an average of 3.6% relative improvement across evaluation settings. We then introduce Stacked Motif Networks, a new architecture designed to capture higher order motifs in scene graphs that further improves over our strong baseline by an average 7.1% relative gain. Our code is available at github.com/rowanz/neural-motifs.

Hierarchical text classification (HTC) is the task of assigning labels to a text within a structured space organized as a hierarchy. Recent works treat HTC as a conventional multilabel classification problem, therefore evaluating it as such. We instead propose to evaluate models based on specifically designed hierarchical metrics and we demonstrate the intricacy of metric choice and prediction inference method. We introduce a new challenging dataset and we evaluate fairly, recent sophisticated models, comparing them with a range of simple but strong baselines, including a new theoretically motivated loss. Finally, we show that those baselines are very often competitive with the latest models. This highlights the importance of carefully considering the evaluation methodology when proposing new methods for HTC. Code implementation and dataset are available at https://github.com/RomanPlaud/revisitingHTC.

The existing literature on deep learning for tabular data proposes a wide range of novel architectures and reports competitive results on various datasets. However, the proposed models are usually not properly compared to each other and existing works often use different benchmarks and experiment protocols. As a result, it is unclear for both researchers and practitioners what models perform best. Additionally, the field still lacks effective baselines, that is, the easy-to-use models that provide competitive performance across different problems. In this work, we perform an overview of the main families of DL architectures for tabular data and raise the bar of baselines in tabular DL by identifying two simple and powerful deep architectures. The first one is a ResNet-like architecture which turns out to be a strong baseline that is often missing in prior works. The second model is our simple adaptation of the Transformer architecture for tabular data, which outperforms other solutions on most tasks. Both models are compared to many existing architectures on a diverse set of tasks under the same training and tuning protocols. We also compare the best DL models with Gradient Boosted Decision Trees and conclude that there is still no universally superior solution.

There is growing interest in searching for information from large video corpora. Prior works have studied relevant tasks, such as text-based video retrieval, moment retrieval, video summarization, and video captioning in isolation, without an end-to-end setup that can jointly search from video corpora and generate summaries. Such an end-to-end setup would allow for many interesting applications, e.g., a text-based search that finds a relevant video from a video corpus, extracts the most relevant moment from that video, and segments the moment into important steps with captions. To address this, we present the HiREST (HIerarchical REtrieval and STep-captioning) dataset and propose a new benchmark that covers hierarchical information retrieval and visual/textual stepwise summarization from an instructional video corpus. HiREST consists of 3.4K text-video pairs from an instructional video dataset, where 1.1K videos have annotations of moment spans relevant to text query and breakdown of each moment into key instruction steps with caption and timestamps (totaling 8.6K step captions). Our hierarchical benchmark consists of video retrieval, moment retrieval, and two novel moment segmentation and step captioning tasks. In moment segmentation, models break down a video moment into instruction steps and identify start-end boundaries. In step captioning, models generate a textual summary for each step. We also present starting point task-specific and end-to-end joint baseline models for our new benchmark. While the baseline models show some promising results, there still exists large room for future improvement by the community. Project website: https://hirest-cvpr2023.github.io

Large pre-trained language models have shown promise for few-shot learning, completing text-based tasks given only a few task-specific examples. Will models soon solve classification tasks that have so far been reserved for human research assistants? Existing benchmarks are not designed to measure progress in applied settings, and so don't directly answer this question. The RAFT benchmark (Real-world Annotated Few-shot Tasks) focuses on naturally occurring tasks and uses an evaluation setup that mirrors deployment. Baseline evaluations on RAFT reveal areas current techniques struggle with: reasoning over long texts and tasks with many classes. Human baselines show that some classification tasks are difficult for non-expert humans, reflecting that real-world value sometimes depends on domain expertise. Yet even non-expert human baseline F1 scores exceed GPT-3 by an average of 0.11. The RAFT datasets and leaderboard will track which model improvements translate into real-world benefits at https://raft.elicit.org .

Structure reasoning is a fundamental capability of large language models (LLMs), enabling them to reason about structured commonsense and answer multi-hop questions. However, existing benchmarks for structure reasoning mainly focus on horizontal and coordinate structures (e.g. graphs), overlooking the hierarchical relationships within them. Hierarchical structure reasoning is crucial for human cognition, particularly in memory organization and problem-solving. It also plays a key role in various real-world tasks, such as information extraction and decision-making. To address this gap, we propose HiBench, the first framework spanning from initial structure generation to final proficiency assessment, designed to benchmark the hierarchical reasoning capabilities of LLMs systematically. HiBench encompasses six representative scenarios, covering both fundamental and practical aspects, and consists of 30 tasks with varying hierarchical complexity, totaling 39,519 queries. To evaluate LLMs comprehensively, we develop five capability dimensions that depict different facets of hierarchical structure understanding. Through extensive evaluation of 20 LLMs from 10 model families, we reveal key insights into their capabilities and limitations: 1) existing LLMs show proficiency in basic hierarchical reasoning tasks; 2) they still struggle with more complex structures and implicit hierarchical representations, especially in structural modification and textual reasoning. Based on these findings, we create a small yet well-designed instruction dataset, which enhances LLMs' performance on HiBench by an average of 88.84\% (Llama-3.1-8B) and 31.38\% (Qwen2.5-7B) across all tasks. The HiBench dataset and toolkit are available here, https://github.com/jzzzzh/HiBench, to encourage evaluation.

Behaviour-Driven Development (BDD) suites accumulate step-text duplication whose maintenance cost is established in prior work. Existing detection techniques require running the tests (Binamungu et al., 2018-2023) or are confined to a single organisation (Irshad et al., 2020-2022), leaving a gap: a purely static, paraphrase-robust, step-level detector usable on any repository. We fill the gap with cukereuse, an open-source Python CLI combining exact hashing, Levenshtein ratio, and sentence-transformer embeddings in a layered pipeline, released alongside an empirical corpus of 347 public GitHub repositories, 23,667 parsed .feature files, and 1,113,616 Gherkin steps. The step-weighted exact-duplicate rate is 80.2 %; the median-repository rate is 58.6 % (Spearman rho = 0.51 with size). The top hybrid cluster groups 20.7k occurrences across 2.2k files. Against 1,020 pairs manually labelled by the three authors under a released rubric (inter-annotator Fleiss' kappa = 0.84 on a 60-pair overlap), we report precision, recall, and F1 with bootstrap 95 % CIs under two protocols: the primary rubric and a score-free second-pass relabelling. The strongest honest pair-level number is near-exact at F1 = 0.822 on score-free labels; the primary-rubric semantic F1 = 0.906 is inflated by a stratification artefact that pins recall at 1.000. Lexical baselines (SourcererCC-style, NiCad-style) reach primary F1 = 0.761 and 0.799. The paper also presents a CDN-structured critique of Gherkin (Cognitive Dimensions of Notations); eight of fourteen dimensions are rated problematic or unsupported. The tool, corpus, labelled pairs, rubric, and pipeline are released under permissive licences.

We consider the two related problems of detecting if an example is misclassified or out-of-distribution. We present a simple baseline that utilizes probabilities from softmax distributions. Correctly classified examples tend to have greater maximum softmax probabilities than erroneously classified and out-of-distribution examples, allowing for their detection. We assess performance by defining several tasks in computer vision, natural language processing, and automatic speech recognition, showing the effectiveness of this baseline across all. We then show the baseline can sometimes be surpassed, demonstrating the room for future research on these underexplored detection tasks.

Managing the prediction of metrics in high-frequency financial markets is a challenging task. An efficient way is by monitoring the dynamics of a limit order book to identify the information edge. This paper describes the first publicly available benchmark dataset of high-frequency limit order markets for mid-price prediction. We extracted normalized data representations of time series data for five stocks from the NASDAQ Nordic stock market for a time period of ten consecutive days, leading to a dataset of ~4,000,000 time series samples in total. A day-based anchored cross-validation experimental protocol is also provided that can be used as a benchmark for comparing the performance of state-of-the-art methodologies. Performance of baseline approaches are also provided to facilitate experimental comparisons. We expect that such a large-scale dataset can serve as a testbed for devising novel solutions of expert systems for high-frequency limit order book data analysis.

We propose a simple but strong baseline for time series classification from scratch with deep neural networks. Our proposed baseline models are pure end-to-end without any heavy preprocessing on the raw data or feature crafting. The proposed Fully Convolutional Network (FCN) achieves premium performance to other state-of-the-art approaches and our exploration of the very deep neural networks with the ResNet structure is also competitive. The global average pooling in our convolutional model enables the exploitation of the Class Activation Map (CAM) to find out the contributing region in the raw data for the specific labels. Our models provides a simple choice for the real world application and a good starting point for the future research. An overall analysis is provided to discuss the generalization capability of our models, learned features, network structures and the classification semantics.

Pir\'a is a reading comprehension dataset focused on the ocean, the Brazilian coast, and climate change, built from a collection of scientific abstracts and reports on these topics. This dataset represents a versatile language resource, particularly useful for testing the ability of current machine learning models to acquire expert scientific knowledge. Despite its potential, a detailed set of baselines has not yet been developed for Pir\'a. By creating these baselines, researchers can more easily utilize Pir\'a as a resource for testing machine learning models across a wide range of question answering tasks. In this paper, we define six benchmarks over the Pir\'a dataset, covering closed generative question answering, machine reading comprehension, information retrieval, open question answering, answer triggering, and multiple choice question answering. As part of this effort, we have also produced a curated version of the original dataset, where we fixed a number of grammar issues, repetitions, and other shortcomings. Furthermore, the dataset has been extended in several new directions, so as to face the aforementioned benchmarks: translation of supporting texts from English into Portuguese, classification labels for answerability, automatic paraphrases of questions and answers, and multiple choice candidates. The results described in this paper provide several points of reference for researchers interested in exploring the challenges provided by the Pir\'a dataset.

Although RDBs store vast amounts of rich, informative data spread across interconnected tables, the progress of predictive machine learning models as applied to such tasks arguably falls well behind advances in other domains such as computer vision or natural language processing. This deficit stems, at least in part, from the lack of established/public RDB benchmarks as needed for training and evaluation purposes. As a result, related model development thus far often defaults to tabular approaches trained on ubiquitous single-table benchmarks, or on the relational side, graph-based alternatives such as GNNs applied to a completely different set of graph datasets devoid of tabular characteristics. To more precisely target RDBs lying at the nexus of these two complementary regimes, we explore a broad class of baseline models predicated on: (i) converting multi-table datasets into graphs using various strategies equipped with efficient subsampling, while preserving tabular characteristics; and (ii) trainable models with well-matched inductive biases that output predictions based on these input subgraphs. Then, to address the dearth of suitable public benchmarks and reduce siloed comparisons, we assemble a diverse collection of (i) large-scale RDB datasets and (ii) coincident predictive tasks. From a delivery standpoint, we operationalize the above four dimensions (4D) of exploration within a unified, scalable open-source toolbox called 4DBInfer. We conclude by presenting evaluations using 4DBInfer, the results of which highlight the importance of considering each such dimension in the design of RDB predictive models, as well as the limitations of more naive approaches such as simply joining adjacent tables. Our source code is released at https://github.com/awslabs/multi-table-benchmark .

We introduce a new, highly challenging benchmark and a dataset -- FungiTastic -- based on data continuously collected over a twenty-year span. The dataset originates in fungal records labeled and curated by experts. It consists of about 350k multi-modal observations that include more than 650k photographs from 5k fine-grained categories and diverse accompanying information, e.g., acquisition metadata, satellite images, and body part segmentation. FungiTastic is the only benchmark that includes a test set with partially DNA-sequenced ground truth of unprecedented label reliability. The benchmark is designed to support (i) standard close-set classification, (ii) open-set classification, (iii) multi-modal classification, (iv) few-shot learning, (v) domain shift, and many more. We provide baseline methods tailored for almost all the use-cases. We provide a multitude of ready-to-use pre-trained models on HuggingFace and a framework for model training. A comprehensive documentation describing the dataset features and the baselines are available at https://bohemianvra.github.io/FungiTastic/ and https://www.kaggle.com/datasets/picekl/fungitastic.

DARTS search space (DSS) has become a canonical benchmark for NAS whereas some emerging works pointed out the issue of narrow accuracy range and claimed it would hurt the method ranking. We observe some recent studies already suffer from this issue that overshadows the meaning of scores. In this work, we first propose and orchestrate a suite of improvements to frame a larger and harder DSS, termed LHD, while retaining high efficiency in search. We step forward to renovate a LHD-based new benchmark, taking care of both discernibility and accessibility. Specifically, we re-implement twelve baselines and evaluate them across twelve conditions by combining two underexpolored influential factors: transductive robustness and discretization policy, to reasonably construct a benchmark upon multi-condition evaluation. Considering that the tabular benchmarks are always insufficient to adequately evaluate the methods of neural architecture search (NAS), our work can serve as a crucial basis for the future progress of NAS. https://github.com/chaoji90/LHD

The web provides a rich, open-domain environment with textual, structural, and spatial properties. We propose a new task for grounding language in this environment: given a natural language command (e.g., "click on the second article"), choose the correct element on the web page (e.g., a hyperlink or text box). We collected a dataset of over 50,000 commands that capture various phenomena such as functional references (e.g. "find who made this site"), relational reasoning (e.g. "article by john"), and visual reasoning (e.g. "top-most article"). We also implemented and analyzed three baseline models that capture different phenomena present in the dataset.

Despite the power of Large Language Models (LLMs) like GPT-4, they still struggle with tasks that require generating complex, structured outputs. In this study, we assess the capability of Current LLMs in generating complex structured data and propose a structure-aware fine-tuning approach as a solution to improve this ability. To perform a comprehensive evaluation, we propose Struc-Bench, include five representative LLMs (i.e., GPT-NeoX 20B, GPT-3.5, GPT-4, and Vicuna) and evaluate them on our carefully constructed datasets spanning raw text, HTML, and LaTeX tables. Based on our analysis of current model performance, we identify specific common formatting errors and areas of potential improvement. To address complex formatting requirements, we utilize FormatCoT (Chain-of-Thought) to generate format instructions from target outputs. Our experiments show that our structure-aware fine-tuning method, when applied to LLaMA-7B, significantly improves adherence to natural language constraints, outperforming other evaluated LLMs. Based on these results, we present an ability map of model capabilities from six dimensions (i.e., coverage, formatting, reasoning, comprehension, pragmatics, and hallucination). This map highlights the weaknesses of LLMs in handling complex structured outputs and suggests promising directions for future work. Our code and models can be found at https://github.com/gersteinlab/Struc-Bench.

While deep learning has enabled tremendous progress on text and image datasets, its superiority on tabular data is not clear. We contribute extensive benchmarks of standard and novel deep learning methods as well as tree-based models such as XGBoost and Random Forests, across a large number of datasets and hyperparameter combinations. We define a standard set of 45 datasets from varied domains with clear characteristics of tabular data and a benchmarking methodology accounting for both fitting models and finding good hyperparameters. Results show that tree-based models remain state-of-the-art on medium-sized data (sim10K samples) even without accounting for their superior speed. To understand this gap, we conduct an empirical investigation into the differing inductive biases of tree-based models and Neural Networks (NNs). This leads to a series of challenges which should guide researchers aiming to build tabular-specific NNs: 1. be robust to uninformative features, 2. preserve the orientation of the data, and 3. be able to easily learn irregular functions. To stimulate research on tabular architectures, we contribute a standard benchmark and raw data for baselines: every point of a 20 000 compute hours hyperparameter search for each learner.

Network pruning is widely used for reducing the heavy inference cost of deep models in low-resource settings. A typical pruning algorithm is a three-stage pipeline, i.e., training (a large model), pruning and fine-tuning. During pruning, according to a certain criterion, redundant weights are pruned and important weights are kept to best preserve the accuracy. In this work, we make several surprising observations which contradict common beliefs. For all state-of-the-art structured pruning algorithms we examined, fine-tuning a pruned model only gives comparable or worse performance than training that model with randomly initialized weights. For pruning algorithms which assume a predefined target network architecture, one can get rid of the full pipeline and directly train the target network from scratch. Our observations are consistent for multiple network architectures, datasets, and tasks, which imply that: 1) training a large, over-parameterized model is often not necessary to obtain an efficient final model, 2) learned "important" weights of the large model are typically not useful for the small pruned model, 3) the pruned architecture itself, rather than a set of inherited "important" weights, is more crucial to the efficiency in the final model, which suggests that in some cases pruning can be useful as an architecture search paradigm. Our results suggest the need for more careful baseline evaluations in future research on structured pruning methods. We also compare with the "Lottery Ticket Hypothesis" (Frankle & Carbin 2019), and find that with optimal learning rate, the "winning ticket" initialization as used in Frankle & Carbin (2019) does not bring improvement over random initialization.

The language identification task is a crucial fundamental step in NLP. Often it serves as a pre-processing step for widely used NLP applications such as multilingual machine translation, information retrieval, question and answering, and text summarization. The core challenge of language identification lies in distinguishing languages in noisy, short, and code-mixed environments. This becomes even harder in case of diverse Indian languages that exhibit lexical and phonetic similarities, but have distinct differences. Many Indian languages share the same script making the task even more challenging. In this paper, we release a dataset of 230K sentences consisting of English and all 22 official Indian languages labeled with their language identifiers where data in most languages are newly created. We also develop and release robust baseline models using state-of-the-art approaches in machine learning and deep learning that can aid the research in this field. Our baseline models are comparable to the state-of-the-art models for the language identification task.

A well-formulated benchmark plays a critical role in spurring advancements in the natural language processing (NLP) field, as it allows objective and precise evaluation of diverse models. As modern language models (LMs) have become more elaborate and sophisticated, more difficult benchmarks that require linguistic knowledge and reasoning have been proposed. However, most of these benchmarks only support English, and great effort is necessary to construct benchmarks for other low resource languages. To this end, we propose a new benchmark named Korean balanced evaluation of significant tasks (KoBEST), which consists of five Korean-language downstream tasks. Professional Korean linguists designed the tasks that require advanced Korean linguistic knowledge. Moreover, our data is purely annotated by humans and thoroughly reviewed to guarantee high data quality. We also provide baseline models and human performance results. Our dataset is available on the Huggingface.

Prior work uses linear probes on benchmark prompts as evidence of evaluation awareness in large language models. Because evaluation context is typically entangled with benchmark format and genre, it is unclear whether probe-based signals reflect context or surface structure. We test whether these signals persist under partial control of prompt format using a controlled 2x2 dataset and diagnostic rewrites. We find that probes primarily track benchmark-canonical structure and fail to generalize to free-form prompts independent of linguistic style. Thus, standard probe-based methodologies do not reliably disentangle evaluation context from structural artifacts, limiting the evidential strength of existing results.

LLM-based code agents navigate repositories through keyword search but miss the structural relationships, such as call graphs, inheritance hierarchies, and configuration dependencies, that define how software actually works. This makes agent navigation stochastic and difficult to reproduce across runs. We investigate whether lightweight static analysis can provide deterministic anchors for these agents: stable structural facts injected as plain-text comments that constrain probabilistic exploration and make navigation more predictable. Starting from a strong baseline, Codex from OpenAI, we systematically inject varying granularities of structural annotations and measure their effects on localization, trajectory behavior, and run-to-run stability. Our study identifies what we call the deterministic anchoring effect: static structure helps less by making agents "smarter" and more by making their navigation disciplined and reproducible. Three observations support this finding: (1) Anchoring works: lightweight call/inheritance topology improves function-level localization (+2.2pp Func@5) and shortens trajectories (-1.6 interaction rounds); (2) Anchoring is scale-sensitive: the optimal granularity and directionality depend on repository characteristics, where denser semantics show diminishing returns and hub-heavy projects benefit from inverse-only links that expose "who-calls-me" without forward edges; (3) Anchoring stabilizes: tags raise link-following rate from 0.15-0.18 to 0.21-0.24, roughly halve run-to-run variance, and improve single-run reliability (Pass@1 +3.4 pp) on medium-scale repositories, at the cost of roughly 10% more input tokens. These observations suggest practical guidelines: default to lightweight topology on medium projects, prune forward edges in large repositories, and reserve dense tags for implicit-dependency cases.

Two prominent challenges in explainability research involve 1) the nuanced evaluation of explanations and 2) the modeling of missing information through baseline representations. The existing literature introduces diverse evaluation metrics, each scrutinizing the quality of explanations through distinct lenses. Additionally, various baseline representations have been proposed, each modeling the notion of missingness differently. Yet, a consensus on the ultimate evaluation metric and baseline representation remains elusive. This work acknowledges the diversity in explanation metrics and baselines, demonstrating that different metrics exhibit preferences for distinct explanation maps resulting from the utilization of different baseline representations and distributions. To address the diversity in metrics and accommodate the variety of baseline representations in a unified manner, we propose Baseline Exploration-Exploitation (BEE) - a path-integration method that introduces randomness to the integration process by modeling the baseline as a learned random tensor. This tensor follows a learned mixture of baseline distributions optimized through a contextual exploration-exploitation procedure to enhance performance on the specific metric of interest. By resampling the baseline from the learned distribution, BEE generates a comprehensive set of explanation maps, facilitating the selection of the best-performing explanation map in this broad set for the given metric. Extensive evaluations across various model architectures showcase the superior performance of BEE in comparison to state-of-the-art explanation methods on a variety of objective evaluation metrics.

Given the importance of remote sensing, surprisingly little attention has been paid to it by the representation learning community. To address it and to establish baselines and a common evaluation protocol in this domain, we provide simplified access to 5 diverse remote sensing datasets in a standardized form. Specifically, we investigate in-domain representation learning to develop generic remote sensing representations and explore which characteristics are important for a dataset to be a good source for remote sensing representation learning. The established baselines achieve state-of-the-art performance on these datasets.

Linear sequences of words are implicitly represented in our brains by hierarchical structures that organize the composition of words in sentences. Linguists formalize different frameworks to model this hierarchy; two of the most common syntactic frameworks are Constituency and Dependency. Constituency represents sentences as nested groups of phrases, while dependency represents a sentence by assigning relations between its words. Recently, the pursuit of intelligent machines has produced Language Models (LMs) capable of solving many language tasks with a human-level performance. Many studies now question whether LMs implicitly represent syntactic hierarchies. This thesis focuses on producing constituency and dependency structures from LMs in an unsupervised setting. I review the critical methods in this field and highlight a line of work that utilizes a numerical representation for binary constituency trees (Syntactic Distance). I present a detailed study on StructFormer (SF) (Shen et al., 2021), which retrofits a transformer encoder architecture with a parser network to produce constituency and dependency structures. I present six experiments to analyze and address this field's challenges; experiments include investigating the effect of repositioning the parser network within the SF architecture, evaluating subword-based induced trees, and benchmarking the models developed in the thesis experiments on linguistic tasks. Models benchmarking is performed by participating in the BabyLM challenge, published at CoNLL 2023 (Momen et al., 2023). The results of this thesis encourage further development in the direction of retrofitting transformer-based models to induce syntactic structures, supported by the acceptable performance of SF in different experimental settings and the observed limitations that require innovative solutions to advance the state of syntactic structure induction.

Recent progress in self-supervision has shown that pre-training large neural networks on vast amounts of unsupervised data can lead to substantial increases in generalization to downstream tasks. Such models, recently coined foundation models, have been transformational to the field of natural language processing. Variants have also been proposed for image data, but their applicability to remote sensing tasks is limited. To stimulate the development of foundation models for Earth monitoring, we propose a benchmark comprised of six classification and six segmentation tasks, which were carefully curated and adapted to be both relevant to the field and well-suited for model evaluation. We accompany this benchmark with a robust methodology for evaluating models and reporting aggregated results to enable a reliable assessment of progress. Finally, we report results for 20 baselines to gain information about the performance of existing models. We believe that this benchmark will be a driver of progress across a variety of Earth monitoring tasks.

Word embeddings have been shown to be useful across state-of-the-art systems in many natural language processing tasks, ranging from question answering systems to dependency parsing. (Herbelot and Vecchi, 2015) explored word embeddings and their utility for modeling language semantics. In particular, they presented an approach to automatically map a standard distributional semantic space onto a set-theoretic model using partial least squares regression. We show in this paper that a simple baseline achieves a +51% relative improvement compared to their model on one of the two datasets they used, and yields competitive results on the second dataset.

Scientific surveys require not only summarizing large bodies of literature, but also organizing them into clear and coherent conceptual structures. Existing automatic survey generation methods typically focus on linear text generation and struggle to explicitly model hierarchical relations among research topics and structured methodological comparisons, resulting in gaps in structural organization compared to expert-written surveys. We propose MVSS, a multi-view structured survey generation framework that jointly generates and aligns citation-grounded hierarchical trees, structured comparison tables, and survey text. MVSS follows a structure-first paradigm: it first constructs a conceptual tree of the research domain, then generates comparison tables constrained by the tree, and finally uses both as structural constraints for text generation. This enables complementary multi-view representations across structure, comparison, and narrative. We introduce an evaluation framework assessing structural quality, comparative completeness, and citation fidelity. Experiments on 76 computer science topics show MVSS outperforms existing methods in organization and evidence grounding, achieving performance comparable to expert surveys.

For natural language understanding (NLU) technology to be maximally useful, both practically and as a scientific object of study, it must be general: it must be able to process language in a way that is not exclusively tailored to any one specific task or dataset. In pursuit of this objective, we introduce the General Language Understanding Evaluation benchmark (GLUE), a tool for evaluating and analyzing the performance of models across a diverse range of existing NLU tasks. GLUE is model-agnostic, but it incentivizes sharing knowledge across tasks because certain tasks have very limited training data. We further provide a hand-crafted diagnostic test suite that enables detailed linguistic analysis of NLU models. We evaluate baselines based on current methods for multi-task and transfer learning and find that they do not immediately give substantial improvements over the aggregate performance of training a separate model per task, indicating room for improvement in developing general and robust NLU systems.

Discovering novel concepts in unlabelled datasets and in a continuous manner is an important desideratum of lifelong learners. In the literature such problems have been partially addressed under very restricted settings, where novel classes are learned by jointly accessing a related labelled set (e.g., NCD) or by leveraging only a supervisedly pre-trained model (e.g., class-iNCD). In this work we challenge the status quo in class-iNCD and propose a learning paradigm where class discovery occurs continuously and truly unsupervisedly, without needing any related labelled set. In detail, we propose to exploit the richer priors from strong self-supervised pre-trained models (PTM). To this end, we propose simple baselines, composed of a frozen PTM backbone and a learnable linear classifier, that are not only simple to implement but also resilient under longer learning scenarios. We conduct extensive empirical evaluation on a multitude of benchmarks and show the effectiveness of our proposed baselines when compared with sophisticated state-of-the-art methods. The code is open source.

Foundation models, often pre-trained with large-scale data, have achieved paramount success in jump-starting various vision and language applications. Recent advances further enable adapting foundation models in downstream tasks efficiently using only a few training samples, e.g., in-context learning. Yet, the application of such learning paradigms in medical image analysis remains scarce due to the shortage of publicly accessible data and benchmarks. In this paper, we aim at approaches adapting the foundation models for medical image classification and present a novel dataset and benchmark for the evaluation, i.e., examining the overall performance of accommodating the large-scale foundation models downstream on a set of diverse real-world clinical tasks. We collect five sets of medical imaging data from multiple institutes targeting a variety of real-world clinical tasks (22,349 images in total), i.e., thoracic diseases screening in X-rays, pathological lesion tissue screening, lesion detection in endoscopy images, neonatal jaundice evaluation, and diabetic retinopathy grading. Results of multiple baseline methods are demonstrated using the proposed dataset from both accuracy and cost-effective perspectives.

Statutory reasoning is the task of determining whether a legal statute, stated in natural language, applies to the text description of a case. Prior work introduced a resource that approached statutory reasoning as a monolithic textual entailment problem, with neural baselines performing nearly at-chance. To address this challenge, we decompose statutory reasoning into four types of language-understanding challenge problems, through the introduction of concepts and structure found in Prolog programs. Augmenting an existing benchmark, we provide annotations for the four tasks, and baselines for three of them. Models for statutory reasoning are shown to benefit from the additional structure, improving on prior baselines. Further, the decomposition into subtasks facilitates finer-grained model diagnostics and clearer incremental progress.

Accurate, spatially explicit characterization of tropical forest structure is essential for carbon accounting and ecosystem monitoring, yet most ML pipelines predict canopy-top height proxies (e.g., RH95/RH98) or AGBD as separate scalar targets, rather than learning the forest vertical structure as an ordered profile. The community lacks a ML-ready multimodal benchmark for predicting the entire GEDI RH profile jointly with AGBD, or for evaluating methods that enforce physically consistent ordering across RH percentiles. We address this with Biomazon, a 20 m multimodal benchmark dataset over the Amazon Basin that pairs GEDI RH and AGBD targets with multi-sensor predictors (Sentinel-1/2, ALOS-2 PALSAR-2, Copernicus DEM, Dynamic World LULC, and AlphaEarth embeddings) under standardized spatial splits and evaluation protocols. Using a shared encoder-decoder with task-specific heads as a baseline framework, we conduct a comprehensive ablation study of (i) backbone/model scale, (ii) modality contributions, and (iii) the use of auxiliary embeddings under standalone and fusion settings, and we report both single-target and joint-target results to quantify tradeoffs under a unified training protocol. Finally, we contextualize baseline performance through regionally aligned comparisons against existing gridded products, including GEDI L4D RH10-RH98 and AGBD, at matching temporal scale. Biomazon, together with the accompanying protocols and baseline results, establishes a reference benchmark for future work on structurally consistent RH-profile prediction and structure-biomass modeling in tropical forests.

In this study, we introduce FEET, a standardized protocol designed to guide the development and benchmarking of foundation models. While numerous benchmark datasets exist for evaluating these models, we propose a structured evaluation protocol across three distinct scenarios to gain a comprehensive understanding of their practical performance. We define three primary use cases: frozen embeddings, few-shot embeddings, and fully fine-tuned embeddings. Each scenario is detailed and illustrated through two case studies: one in sentiment analysis and another in the medical domain, demonstrating how these evaluations provide a thorough assessment of foundation models' effectiveness in research applications. We recommend this protocol as a standard for future research aimed at advancing representation learning models.

The U.S. Securities and Exchange Commission (SEC) requires that public companies file financial reports tagging numbers with the machine readable inline eXtensible Business Reporting Language (iXBRL) standard. However, the highly complex and highly granular taxonomy defined by iXBRL limits label transferability across domains. In this paper, we introduce the Hierarchical Financial Key Performance Indicator (HiFi-KPI) dataset, designed to facilitate numerical KPI extraction at specified levels of granularity from unstructured financial text. Our approach organizes a 218,126-label hierarchy using a taxonomy based grouping method, investigating which taxonomy layer provides the most meaningful structure. HiFi-KPI comprises ~1.8M paragraphs and ~5M entities, each linked to a label in the iXBRL-specific calculation and presentation taxonomies. We provide baselines using encoder-based approaches and structured extraction using Large Language Models (LLMs). To simplify LLM inference and evaluation, we additionally release HiFi-KPI Lite, a manually curated subset with four expert-mapped labels. We publicly release all artifacts

We introduce the Burmese Handwritten Digit Dataset (BHDD), a collection of 87,561 grayscale images of handwritten Burmese digits in ten classes. Each image is 28x28 pixels, following the MNIST format. The training set has 60,000 samples split evenly across classes; the test set has 27,561 samples with class frequencies as they arose during collection. Over 150 people of different ages and backgrounds contributed samples. We analyze the dataset's class distribution, pixel statistics, and morphological variation, and identify digit pairs that are easily confused due to the round shapes of the Myanmar script. Simple baselines (an MLP, a two-layer CNN, and an improved CNN with batch normalization and augmentation) reach 99.40%, 99.75%, and 99.83% test accuracy respectively. BHDD is available under CC BY-SA 4.0 at https://github.com/baseresearch/BHDD

Pre-trained Large Language Models (LLMs) have shown success in a diverse set of language inference and understanding tasks. The pre-training stage of LLMs looks at a large corpus of raw textual data. The BabyLM shared task compares LLM pre-training to human language acquisition, where the number of tokens seen by 13-year-old kids is magnitudes smaller than the number of tokens seen by LLMs. In this work, we pre-train and evaluate LLMs on their ability to learn contextual word representations using roughly the same number of tokens as seen by children. We provide a strong set of baselines; with different architectures, evaluation of changes in performance across epochs, and reported pre-training metrics for the strict small and strict tracks of the task. We also try to loosely replicate the RoBERTa baseline given by the task organizers to observe the training robustness to hyperparameter selection and replicability. We provide the submission details to the strict and strict-small tracks in this report.

Within this study, we propose a new approach for natural language processing using Bayesian networks to predict and analyze the context and how this approach can be applied to the Community Question Answering domain. We discuss how Bayesian networks can detect semantic relationships and dependencies between entities, and this is connected to different score-based approaches of structure-learning. We compared the Bayesian networks with different score metrics, such as the BIC, BDeu, K2 and Chow-Liu trees. Our proposed approach out-performs the baseline model at the precision metric. We also discuss the influence of penalty terms on the structure of Bayesian networks and how they can be used to analyze the relationships between entities. In addition, we examine the visualization of directed acyclic graphs to analyze semantic relationships. The article further identifies issues with detecting certain semantic classes that are separated in the structure of directed acyclic graphs. Finally, we evaluate potential improvements for the Bayesian network approach.

We introduce a self-supervised approach for learning node and graph level representations by contrasting structural views of graphs. We show that unlike visual representation learning, increasing the number of views to more than two or contrasting multi-scale encodings do not improve performance, and the best performance is achieved by contrasting encodings from first-order neighbors and a graph diffusion. We achieve new state-of-the-art results in self-supervised learning on 8 out of 8 node and graph classification benchmarks under the linear evaluation protocol. For example, on Cora (node) and Reddit-Binary (graph) classification benchmarks, we achieve 86.8% and 84.5% accuracy, which are 5.5% and 2.4% relative improvements over previous state-of-the-art. When compared to supervised baselines, our approach outperforms them in 4 out of 8 benchmarks. Source code is released at: https://github.com/kavehhassani/mvgrl

Foundation models for predictive machine learning on tabular data have recently gained significant traction in academia and industry. Research communities across disciplines are increasingly evaluating tabular foundation models on diverse datasets and tasks. However, these task- and discipline-specific evaluations remain largely inaccessible to model researchers because benchmark software and evaluation protocols are fragmented. As a result, model researchers rely on standard benchmarks, which are mostly defined for tasks where tabular foundation models already excel. The most challenging scenarios are excluded, limiting meaningful progress in the field by focusing on marginal improvements on IID data rather than on broader, more demanding challenges. To overcome this, we introduce BeyondArena, the first unified holistic benchmark for tabular data that supports diverse task types (IID, temporal, grouped), across sample size and feature dimensionality scales, with diverse feature types (with text, with high cardinality) from a broad range of disciplines. To enable unified benchmarking beyond standard benchmarks, we introduce Data Foundry, a Python framework and metadata schema for curating tabular datasets for predictive machine learning. Our results across 11 models and 142 curated datasets show that existing tabular foundation models excel on tiny- to medium-sized IID data, while traditional tree-based and deep learning models still dominate on non-IID, large, and high-dimensional datasets. BeyondArena guides model research for the most demanding challenges in tabular data, enabling progress towards truly foundational tabular models.

Convolutional networks for single-view object reconstruction have shown impressive performance and have become a popular subject of research. All existing techniques are united by the idea of having an encoder-decoder network that performs non-trivial reasoning about the 3D structure of the output space. In this work, we set up two alternative approaches that perform image classification and retrieval respectively. These simple baselines yield better results than state-of-the-art methods, both qualitatively and quantitatively. We show that encoder-decoder methods are statistically indistinguishable from these baselines, thus indicating that the current state of the art in single-view object reconstruction does not actually perform reconstruction but image classification. We identify aspects of popular experimental procedures that elicit this behavior and discuss ways to improve the current state of research.

This paper provides a baseline system for First-shot-compliant unsupervised anomaly detection (ASD) for machine condition monitoring. First-shot ASD does not allow systems to do machine-type dependent hyperparameter tuning or tool ensembling based on the performance metric calculated with the grand truth. To show benchmark performance for First-shot ASD, this paper proposes an anomaly sound detection system that works on the domain generalization task in the Detection and Classification of Acoustic Scenes and Events (DCASE) 2022 Challenge Task 2: "Unsupervised Anomalous Sound Detection for Machine Condition Monitoring Applying Domain Generalization Technique" while complying with the First-shot requirements introduced in the DCASE 2023 Challenge Task 2 (DCASE2023T2). A simple autoencoder based implementation combined with selective Mahalanobis metric is implemented as a baseline system. The performance evaluation is conducted to set the target benchmark for the forthcoming DCASE2023T2. Source code of the baseline system will be available on GitHub: https://github.com/nttcslab/dcase2023_task2_baseline_ae .

The widely studied task of Natural Language Inference (NLI) requires a system to recognize whether one piece of text is textually entailed by another, i.e. whether the entirety of its meaning can be inferred from the other. In current NLI datasets and models, textual entailment relations are typically defined on the sentence- or paragraph-level. However, even a simple sentence often contains multiple propositions, i.e. distinct units of meaning conveyed by the sentence. As these propositions can carry different truth values in the context of a given premise, we argue for the need to recognize the textual entailment relation of each proposition in a sentence individually. We propose PropSegmEnt, a corpus of over 35K propositions annotated by expert human raters. Our dataset structure resembles the tasks of (1) segmenting sentences within a document to the set of propositions, and (2) classifying the entailment relation of each proposition with respect to a different yet topically-aligned document, i.e. documents describing the same event or entity. We establish strong baselines for the segmentation and entailment tasks. Through case studies on summary hallucination detection and document-level NLI, we demonstrate that our conceptual framework is potentially useful for understanding and explaining the compositionality of NLI labels.

Although Indonesian is known to be the fourth most frequently used language over the internet, the research progress on this language in the natural language processing (NLP) is slow-moving due to a lack of available resources. In response, we introduce the first-ever vast resource for the training, evaluating, and benchmarking on Indonesian natural language understanding (IndoNLU) tasks. IndoNLU includes twelve tasks, ranging from single sentence classification to pair-sentences sequence labeling with different levels of complexity. The datasets for the tasks lie in different domains and styles to ensure task diversity. We also provide a set of Indonesian pre-trained models (IndoBERT) trained from a large and clean Indonesian dataset Indo4B collected from publicly available sources such as social media texts, blogs, news, and websites. We release baseline models for all twelve tasks, as well as the framework for benchmark evaluation, and thus it enables everyone to benchmark their system performances.

Universally modeling all typical information extraction tasks (UIE) with one generative language model (GLM) has revealed great potential by the latest study, where various IE predictions are unified into a linearized hierarchical expression under a GLM. Syntactic structure information, a type of effective feature which has been extensively utilized in IE community, should also be beneficial to UIE. In this work, we propose a novel structure-aware GLM, fully unleashing the power of syntactic knowledge for UIE. A heterogeneous structure inductor is explored to unsupervisedly induce rich heterogeneous structural representations by post-training an existing GLM. In particular, a structural broadcaster is devised to compact various latent trees into explicit high-order forests, helping to guide a better generation during decoding. We finally introduce a task-oriented structure fine-tuning mechanism, further adjusting the learned structures to most coincide with the end-task's need. Over 12 IE benchmarks across 7 tasks our system shows significant improvements over the baseline UIE system. Further in-depth analyses show that our GLM learns rich task-adaptive structural bias that greatly resolves the UIE crux, the long-range dependence issue and boundary identifying. Source codes are open at https://github.com/ChocoWu/LasUIE.

We present HebDB, a weakly supervised dataset for spoken language processing in the Hebrew language. HebDB offers roughly 2500 hours of natural and spontaneous speech recordings in the Hebrew language, consisting of a large variety of speakers and topics. We provide raw recordings together with a pre-processed, weakly supervised, and filtered version. The goal of HebDB is to further enhance research and development of spoken language processing tools for the Hebrew language. Hence, we additionally provide two baseline systems for Automatic Speech Recognition (ASR): (i) a self-supervised model; and (ii) a fully supervised model. We present the performance of these two methods optimized on HebDB and compare them to current multi-lingual ASR alternatives. Results suggest the proposed method reaches better results than the evaluated baselines considering similar model sizes. Dataset, code, and models are publicly available under https://pages.cs.huji.ac.il/adiyoss-lab/HebDB/.

Tables condense key transactional and administrative information into compact layouts, but practical extraction requires more than text recognition: systems must also recover structure (rows, columns, merged cells, headers) and interpret roles such as line items, subtotals, and totals under common capture artifacts. Many existing resources for table structure recognition and TableVQA are built from clean digital-born sources or rendered tables, and therefore only partially reflect noisy administrative conditions. We introduce DenTab, a dataset of 2{,}000 cropped table images from dental estimates with high-quality HTML annotations, enabling evaluation of table recognition (TR) and table visual question answering (TableVQA) on the same inputs. DenTab includes 2{,}208 questions across eleven categories spanning retrieval, aggregation, and logic/consistency checks. We benchmark 16 systems, including 14 vision--language models (VLMs) and two OCR baselines. Across models, strong structure recovery does not consistently translate into reliable performance on multi-step arithmetic and consistency questions, and these reasoning failures persist even when using ground-truth HTML table inputs. To improve arithmetic reliability without training, we propose the Table Router Pipeline, which routes arithmetic questions to deterministic execution. The pipeline combines (i) a VLM that produces a baseline answer, a structured table representation, and a constrained table program with (ii) a rule-based executor that performs exact computation over the parsed table. The source code and dataset will be made publicly available at https://github.com/hamdilaziz/DenTab.

We revisit the performance of the classic gradual magnitude pruning (GMP) baseline for large language models, focusing on the classic BERT benchmark on various popular tasks. Despite existing evidence in the literature that GMP performs poorly, we show that a simple and general variant, which we call GMP*, can match and sometimes outperform more complex state-of-the-art methods. Our results provide a simple yet strong baseline for future work, highlight the importance of parameter tuning for baselines, and even improve the performance of the state-of-the-art second-order pruning method in this setting.

Identifying the intent of a citation in scientific papers (e.g., background information, use of methods, comparing results) is critical for machine reading of individual publications and automated analysis of the scientific literature. We propose structural scaffolds, a multitask model to incorporate structural information of scientific papers into citations for effective classification of citation intents. Our model achieves a new state-of-the-art on an existing ACL anthology dataset (ACL-ARC) with a 13.3% absolute increase in F1 score, without relying on external linguistic resources or hand-engineered features as done in existing methods. In addition, we introduce a new dataset of citation intents (SciCite) which is more than five times larger and covers multiple scientific domains compared with existing datasets. Our code and data are available at: https://github.com/allenai/scicite.

This is a book about large language models. As indicated by the title, it primarily focuses on foundational concepts rather than comprehensive coverage of all cutting-edge technologies. The book is structured into four main chapters, each exploring a key area: pre-training, generative models, prompting techniques, and alignment methods. It is intended for college students, professionals, and practitioners in natural language processing and related fields, and can serve as a reference for anyone interested in large language models.

For humans, language production and comprehension is sensitive to the hierarchical structure of sentences. In natural language processing, past work has questioned how effectively neural sequence models like transformers capture this hierarchical structure when generalizing to structurally novel inputs. We show that transformer language models can learn to generalize hierarchically after training for extremely long periods -- far beyond the point when in-domain accuracy has saturated. We call this phenomenon structural grokking. On multiple datasets, structural grokking exhibits inverted U-shaped scaling in model depth: intermediate-depth models generalize better than both very deep and very shallow transformers. When analyzing the relationship between model-internal properties and grokking, we find that optimal depth for grokking can be identified using the tree-structuredness metric of murty2023projections. Overall, our work provides strong evidence that, with extended training, vanilla transformers discover and use hierarchical structure.

Weak supervision (WS) frameworks are a popular way to bypass hand-labeling large datasets for training data-hungry models. These approaches synthesize multiple noisy but cheaply-acquired estimates of labels into a set of high-quality pseudolabels for downstream training. However, the synthesis technique is specific to a particular kind of label, such as binary labels or sequences, and each new label type requires manually designing a new synthesis algorithm. Instead, we propose a universal technique that enables weak supervision over any label type while still offering desirable properties, including practical flexibility, computational efficiency, and theoretical guarantees. We apply this technique to important problems previously not tackled by WS frameworks including learning to rank, regression, and learning in hyperbolic space. Theoretically, our synthesis approach produces a consistent estimators for learning some challenging but important generalizations of the exponential family model. Experimentally, we validate our framework and show improvement over baselines in diverse settings including real-world learning-to-rank and regression problems along with learning on hyperbolic manifolds.

We present the NCS-models, a family of seismic foundation models pretrained on a large share of full-stack seismic cubes from the Norwegian Continental Shelf (NCS) available through the public DISKOS database. The model weights are open-sourced for the wider geoscience community. Foundation models trained with large-scale self-supervision are emerging as a promising basis for automatic seismic interpretation. However, most existing seismic models rely on limited or proprietary datasets, and it remains unclear how well natural-image foundation models transfer to seismic data. Our goals are to develop basin-scale seismic foundation models, provide practical recipes for scalable 3D training, and quantify the effects of basin-targeted pretraining and token dimensionality on downstream interpretation performance. Using masked autoencoders with Vision Transformer backbones, we pretrain models on a DISKOS-derived corpus of 3D time- and depth-migrated seismic volumes. The NCS-model variants use 2D, 2.5D multi-view, and 3D tokenization within a matched training setup. Transfer is evaluated on interpretation benchmarks using frozen backbones and a simple k-nearest neighbor classifier. Baselines include an ImageNet-pretrained MAE, a frontier vision foundation model, and a globally pretrained seismic model. Natural-image pretrained models do not reliably transfer, reflecting the large domain gap between natural images and seismic data. Seismic pretraining is necessary for robust transfer, and large-scale basin-targeted pretraining yields further gains over a smaller globally pretrained seismic baseline. The NCS-models achieve the best overall performance without fine-tuning, while 2.5D tokenization offers the strongest accuracy-efficiency tradeoff and the embeddings support similarity search for interactive interpretation.

Physics education researchers (PER) often analyze student data with single-level regression models (e.g., linear and logistic regression). However, education datasets can have hierarchical structures, such as students nested within courses, that single-level models fail to account for. The improper use of single-level models to analyze hierarchical datasets can lead to biased findings. Hierarchical models (a.k.a., multi-level models) account for this hierarchical nested structure in the data. In this publication, we outline the theoretical differences between how single-level and multi-level models handle hierarchical datasets. We then present analysis of a dataset from 112 introductory physics courses using both multiple linear regression and hierarchical linear modeling to illustrate the potential impact of using an inappropriate analytical method on PER findings and implications. Research can leverage multi-institutional datasets to improve the field's understanding of how to support student success in physics. There is no post hoc fix, however, if researchers use inappropriate single-level models to analyze multi-level datasets. To continue developing reliable and generalizable knowledge, PER should use hierarchical models when analyzing hierarchical datasets. The supplemental materials include a sample dataset, R code to model the building and analysis presented in the paper, and an HTML output from the R code.

Many benchmarks for automated causal inference evaluate a system's performance based on a single numerical output, such as an Average Treatment Effect (ATE). This approach conflates two distinct steps in causal analysis: identification-formulating a valid research design under stated assumptions-and estimation-implementing that design numerically on finite data. We introduce CausalReasoningBenchmark, a benchmark of 173 queries across 138 real-world datasets, curated from 85 peer-reviewed research papers and four widely-used causal-inference textbooks. For each query a system must produce (i) a structured identification specification that names the strategy, the treatment, outcome, and control variables, and all design-specific elements, and (ii) a point estimate with a standard error. By scoring these two components separately, our benchmark enables granular diagnosis: it distinguishes failures in causal reasoning from errors in numerical execution. Baseline results with a state-of-the-art LLM show that, while the model correctly identifies the high-level strategy in 84 % of cases, full identification-specification correctness drops to only 30 %, revealing that the bottleneck lies in the nuanced details of research design rather than in computation. CausalReasoningBenchmark is publicly available on Hugging Face and is designed to foster the development of more robust automated causal-inference systems.

We describe HypotheSAEs, a general method to hypothesize interpretable relationships between text data (e.g., headlines) and a target variable (e.g., clicks). HypotheSAEs has three steps: (1) train a sparse autoencoder on text embeddings to produce interpretable features describing the data distribution, (2) select features that predict the target variable, and (3) generate a natural language interpretation of each feature (e.g., "mentions being surprised or shocked") using an LLM. Each interpretation serves as a hypothesis about what predicts the target variable. Compared to baselines, our method better identifies reference hypotheses on synthetic datasets (at least +0.06 in F1) and produces more predictive hypotheses on real datasets (~twice as many significant findings), despite requiring 1-2 orders of magnitude less compute than recent LLM-based methods. HypotheSAEs also produces novel discoveries on two well-studied tasks: explaining partisan differences in Congressional speeches and identifying drivers of engagement with online headlines.

The paper describes the open Russian medical language understanding benchmark covering several task types (classification, question answering, natural language inference, named entity recognition) on a number of novel text sets. Given the sensitive nature of the data in healthcare, such a benchmark partially closes the problem of Russian medical dataset absence. We prepare the unified format labeling, data split, and evaluation metrics for new tasks. The remaining tasks are from existing datasets with a few modifications. A single-number metric expresses a model's ability to cope with the benchmark. Moreover, we implement several baseline models, from simple ones to neural networks with transformer architecture, and release the code. Expectedly, the more advanced models yield better performance, but even a simple model is enough for a decent result in some tasks. Furthermore, for all tasks, we provide a human evaluation. Interestingly the models outperform humans in the large-scale classification tasks. However, the advantage of natural intelligence remains in the tasks requiring more knowledge and reasoning.

To enable building and testing models on long-document comprehension, we introduce QuALITY, a multiple-choice QA dataset with context passages in English that have an average length of about 5,000 tokens, much longer than typical current models can process. Unlike in prior work with passages, our questions are written and validated by contributors who have read the entire passage, rather than relying on summaries or excerpts. In addition, only half of the questions are answerable by annotators working under tight time constraints, indicating that skimming and simple search are not enough to consistently perform well. Our baseline models perform poorly on this task (55.4%) and significantly lag behind human performance (93.5%).

The influential Residual Networks designed by He et al. remain the gold-standard architecture in numerous scientific publications. They typically serve as the default architecture in studies, or as baselines when new architectures are proposed. Yet there has been significant progress on best practices for training neural networks since the inception of the ResNet architecture in 2015. Novel optimization & data-augmentation have increased the effectiveness of the training recipes. In this paper, we re-evaluate the performance of the vanilla ResNet-50 when trained with a procedure that integrates such advances. We share competitive training settings and pre-trained models in the timm open-source library, with the hope that they will serve as better baselines for future work. For instance, with our more demanding training setting, a vanilla ResNet-50 reaches 80.4% top-1 accuracy at resolution 224x224 on ImageNet-val without extra data or distillation. We also report the performance achieved with popular models with our training procedure.