| { |
| "id": "single-software-execution--cli--solidcam--task-15--windows", |
| "snapshot": "SolidCAM-2025", |
| "instruction": "Use command-line automation through the installed SOLIDWORKS CAM 2025 environment and CAMWorks API; do not use GUI clicks, generic G-code generators, or manual .nc editing/copying. For this workflow, SOLIDWORKS CAM/CAMWorks is hosted by `C:\\Program Files\\SOLIDWORKS Corp\\SOLIDWORKS\\SLDWORKS.exe`; run the native CAM automation through that installation. Load C:\\Users\\User\\Desktop\\risky_setup.step and read C:\\Users\\User\\Desktop\\tools.csv. Treat the fixture solids contained in the supplied STEP assembly as the complete collision envelope for this task; installed TechDB holder profiles may be used to instantiate tools but must not change the required safe-hole set. Plan spot-drilling and drilling for the sixteen D5 candidate holes with the supplied D3 spot drill and D5 drill while maintaining at least 3 mm radial clearance between the cutting-tool envelope and every fixture during cutting or lateral feed motion. The holes centered at (-45, 24), (15, 24), and (45, 24) mm do not satisfy this clearance and must be skipped; omit those three coordinates from cutting cycles. Spot-drill and drill all remaining thirteen holes, use a clearance plane at least 3 mm above the 28 mm fixture tops for lateral positioning, and post the result through SOLIDWORKS CAM. Save the posted NC output exactly as C:\\Users\\User\\Desktop\\task-15.nc.", |
| "source": "https://www.solidworks.com/product/solidworks-cam; https://camworks.com/why-camworks/", |
| "config": [ |
| { |
| "type": "upload_file", |
| "parameters": { |
| "files": [ |
| { |
| "local_path": "task-15/init_file/risky_setup.step", |
| "path": "C:\\Users\\User\\Desktop\\risky_setup.step" |
| }, |
| { |
| "local_path": "task-15/init_file/tools.csv", |
| "path": "C:\\Users\\User\\Desktop\\tools.csv" |
| } |
| ] |
| } |
| } |
| ], |
| "trajectory": "trajectories/", |
| "related_apps": [ |
| "solidcam" |
| ], |
| "artifact_paths": [ |
| "C:\\Users\\User\\Desktop\\task-15.nc" |
| ], |
| "evaluator": { |
| "postconfig": [ |
| { |
| "type": "upload_file", |
| "parameters": { |
| "files": [ |
| { |
| "local_path": "task-15/eval.py", |
| "path": "C:\\Users\\User\\Desktop\\eval.py" |
| } |
| ] |
| } |
| } |
| ], |
| "func": "exact_match", |
| "result": { |
| "type": "vm_command_line", |
| "command": "python C:\\Users\\User\\Desktop\\eval.py", |
| "shell": "true" |
| }, |
| "expected": { |
| "type": "rule", |
| "rules": { |
| "expected": "True\n" |
| } |
| } |
| }, |
| "proxy": false, |
| "fixed_ip": false, |
| "possibility_of_env_change": "low" |
| } |
|
|
