hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.3.3.3.1 Conformance requirements | 1. On receipt of a PACKET ACCESS REJECT message, the mobile station shall stop timer T3168 if running and indicate a packet access failure to upper layers. If no downlink TBF exists, the mobile station shall return to packet idle mode.
2. If the PACKET ACCESS REJECT message contains a WAIT_INDICATION field in a Reject ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.3.3.3.2 Test purposes | To verify that during the uplink resource reallocation:
1. The MS returns to packet idle mode when it receives PACKET ACCESS REJECT without WAIT_INDICATION.
2. On receipt of a PACKET ACCESS REJECT with a WAIT_INDICATION the MS waits until T3172 expires. The MS, if having another RLC data blocks to transmit, initiates a... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.3.3.3.3 Method of test | Initial Conditions
System Simulator:
1 cell, default setting, BS_CV_MAX = 1, N201-U=500 for SAPI 3, 5, 9, 11, N201-U=270 for SAPI 7.
Mobile Station:
The MS is GPRS attached with a P-TMSI allocated:
- Test PDP context2 and context5 activated;
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
An uplink TBF is ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.3.3.4 Dynamic Allocation / Resource reallocation / Successful / Lower Coding Scheme Command | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.3.3.4.1 Void | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.3.3.4.2 Conformance requirements | 1. 1. On receipt of a PACKET UPLINK ASSIGNMENT or PACKET TIMESLOT RECONFIGURE message the mobile station shall stop timer T3168 and switch to the assigned PDCHs (3GPP TS 04.60 sub-clause 8.1.1.1).
2. The transmitter shall transmit the oldest RLC data block whose corresponding element in V(B) indexed relative to V(A) ha... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.3.3.4.3 Test purposes | Verify that an MS switches to the newly assigned PDCH, retransmits unacknowledged RLC data blocks with the previous CS, transmits no more than one RLC data block with the previous CS and then applies the new CS command only to the new RLC data blocks. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.3.3.4.4 Method of test | Initial Conditions
System Simulator:
1 cell, GPRS supported.
Mobile Station:
The MS is in the state "idle, GMM-registered" with a P-TMSI allocated, has a PDP context 2 activated. One LLC frame of 225 octets (which fits in 3 CS-4 blocks and 3 CS-1 blocks, or 2 CS-4 blocks and 6 CS-1 blocks) are to be sent by the MS.
Spe... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.3.4 Default message contents | Default message contents and macros as defined in the GPRS defaults section 40 are used for subclause 42.3. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4 Measurement reports and Cell change order procedures | This subclause presents tests for "Measurement Reports and Cell Change Order Procedures" which are specified in 3GPP TS 04.60/3GPP TS 44.060 subclauses 5.6 and 8.4.
In the testcases which have uplink data transfer while in NC2, the USF needs to be assigned very frequently so that the measurement reports will be receive... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.1 Measurement reports | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.1.1 Network Control measurement reporting / Uplink / Normal case | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.1.1.1 Conformance requirement | The behaviour of the mobile station is controlled by the NETWORK_CONTROL_ORDER parameter in a PACKET MEASUREMENT ORDER message. The reporting periods are indicated in the NC_REPORTING_PERIOD_T field of the PACKET MEASUREMENT ORDER message. The mobile station shall apply to the timer T3158 the NC_REPORTING_PERIOD_T when... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.1.1.2 Test Purpose | To verify that the MS sends the measurement report of the NC measurements according to the indicated reporting periods, when the T3158 expires.
To verify that the MS restarts the timer T3158 when it expires.
Reference
3GPP TS 04.60, subclauses 5.6.1 and 8.3. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.1.1.3 Method of test | Initial conditions
System Simulator:
1 cell, GPRS supported.
Mobile Station:
MS is in Packet Idle mode and GPRS attached.
PDP context 2 established.
Specific PICS Statements
-
PIXIT Statements
-
Foreseen final state of the MS
- MS is in transfer mode.
Test procedure
MS is brought into uplink packet transfer mode. SS se... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.1.2 Network Control measurement reporting / Idle mode / New cell reselection | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.1.2.1 Conformance requirement | The procedure for measurement report sending shall be initiated by the mobile station at expiry of the NC measurement report interval timer T3158. At expiry of the timer T3158 the mobile station shall restart the expired timer T3158, perform the measurements and initiate the packet access.
The procedure for measurement... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.1.2.2 Test Purpose | To verify that if the MS reselects a new cell while timer T3158 is active, and the time to expiry of timer T3158 is greater than the indicated reporting period for the new cell, the MS shall immediately restart timer T3158 with the indicated reporting period for the new cell.
To verify that if the MS reselects a new ce... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.1.2.3 Method of test | Initial conditions
System Simulator:
3 cells (cell A, cell B, cell C), activated at power-on, GPRS supported.
READY Timer is Set to 4 minutes.
Mobile Station:
MS is in Packet Idle mode and GPRS attached.
the Ready Timer is running.
Specific PICS Statements
-
PIXIT Statements
-
Foreseen final state of the MS
- MS is in... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.1.3 Network Control measurement reporting / Downlink transfer / Normal case | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.1.3.1 Conformance requirement | The procedure for NC measurement report sending shall be initiated by the mobile station at the expiry of the NC measurement report interval timer T3158. At expiry of the timer T3158 the mobile station shall restart the timer T3158, perform the measurements and send the PACKET MEASUREMENT REPORT message containing the ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.1.3.2 Test Purpose | To verify that the MS sends the measurement report of the NC measurements according to the indicated reporting periods, when the T3158 expires.
To verify that the MS restarts the timer T3158 when it expires.
To verify that the MS sends at least two PACKET DOWNLINK ACK/NACK messages before transmitting a PACKET MEASUREM... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.1.3.3 Method of test | Initial conditions
System Simulator:
1 cell, GPRS supported.
Mobile Station:
MS is in Packet Idle mode and GPRS attached.
PDP context 2 established.
Specific PICS Statements
-
PIXIT Statements
-
Foreseen final state of the MS
- MS is in transfer mode.
Test procedure
MS is brought into downlink packet transfer mode. SS ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.1.4.1 Conformance requirement | The procedure for NC measurement report sending shall be initiated by the mobile station at the expiry of the NC measurement report interval timer T3158. At expiry of the timer T3158 the mobile station shall restart the timer T3158, perform the measurements and send the PACKET MEASUREMENT REPORT message containing the ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.1.4.2 Test Purpose | To verify that if the NC parameters are changed while in packet transfer mode, the MS continues to use the changed parameters after returning to packet idle mode. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.1.4.3 Method of test | Initial conditions
System Simulator:
1 cell, GPRS supported.
Mobile Station:
MS is GPRS attached with a P-TMSI allocated.
PDP context 2 established.
Specific PICS Statements
- MS GPRS Release (TSPC_MS_GPRS_RELEASE)
PIXIT Statements
-
Test procedure
MS is brought into uplink packet transfer mode. SS commands MS to NC2 w... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.1.5.1 Conformance requirement | The procedure for NC measurement report sending shall be initiated by the mobile station at the expiry of the NC measurement report interval timer T3158. At expiry of the timer T3158 the mobile station shall restart the timer T3158, perform the measurements and send the PACKET MEASUREMENT REPORT message containing the ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.1.5.2 Test Purpose | To verify that while in NC2, MS performs autonomous cell reselection when the reselection is triggered by the downlink signalling failure. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.1.5.3 Method of test | Initial conditions
System Simulator:
2 cell, GPRS supported.
Parameter
Carrier1
Carrier2
RF Signal Level (dBm)
-60
-70
NETWORK_CONTRO L_ORDER
NC2
NC2
NC_REPORTING_PERIOD_I
110 (30.72 sec)
110 (30.72 sec)
Mobile Station:
MS is GPRS attached on cell A (Carrier 1) with a P-TMSI allocated. Ready timer is set to 2 min.
Spec... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2 Cell change order procedures | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.1 Cell change order procedure / Uplink transfer | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.1.1 Cell change order procedure / Uplink transfer / Normal case | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.1.1.1 Conformance requirement | The cell change order procedure is started by sending a PACKET CELL CHANGE ORDER message to the mobile station on the PCCCH or PACCH. Upon receipt of the PACKET CELL CHANGE ORDER message the mobile station shall start timer T3174.
When a cell reselection is made controlled by the network, the mobile station shall act u... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.1.1.2 Test Purpose | To verify the when NC2 is commanded, the MS sends PACKET MEASUREMENT REPORT messages, in which both the serving and non-serving cells are reported.
To verify that when the cell change order procedure is started by sending a PACKET CELL CHANGE ORDER message with the IMMEDIATE_REL value set to 1, the MS shall abort any T... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.1.1.3 Method of test | Initial conditions
System Simulator:
2 cells (cell A and cell B), activated at power-on, GPRS supported.
Mobile Station:
MS is in Packet Idle mode and GPRS attached.
PDP context 2 established.
Specific PICS Statements
-
PIXIT Statements
-
Foreseen final state of the MS
- MS is in transfer mode.
Test procedure
MS is bro... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.1.2 Void | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.1.3 Cell change order procedure / Uplink transfer / Failure cases / REJECT from the new cell | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.1.3.1 Conformance requirement | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.1.3.1.1 Conformance requirement for Rel-5 and earlier | If a PACKET ACCESS REJECT message is received from the new cell, the mobile station shall start timer T3176, return to the old cell and send a PACKET CELL CHANGE FAILURE message to the network.
If the mobile station was in uplink packet transfer before the cell change, the mobile station shall establish a new uplink TB... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.1.3.1.2 Conformance requirement for Rel-6 and later | In the following cases, the mobile station shall determine that the network controlled cell reselection procedure has failed:
• Access is denied in the new cell (i.e., the mobile station receives an IMMEDIATE ASSIGNMENT REJECT, a PACKET ASSIGNMENT REJECT or, in a UTRAN cell, an RRC CONNECTION REJECT message). Cause: “I... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.1.3.2 Test Purpose | To verify that the mobile station sends a PACKET CELL CHANGE FAILURE message to the network from the old cell, if a PACKET ACCESS REJECT message is received from the new cell. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.1.3.3 Method of test | Initial conditions
System Simulator:
2 cells (cell A, cell B), activated at power-on, GPRS supported.
Mobile Station:
MS is in Packet Idle mode and GPRS attached.
PDP context 2 established.
Specific PICS Statements
-
PIXIT Statements
-
Foreseen final state of the MS
- MS is in Transfer mode.
Test procedure
MS is brough... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.1.4 Cell change order procedure / Uplink transfer / Failure cases / Contention resolution failure | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.1.4.1 Conformance requirement | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.1.4.1.1 Conformance requirement for Rel-5 and earlier | If the contention resolution procedure fails on the new cell, then the mobile station shall start timer T3176 and return to the old cell. The mobile station shall send a PACKET CELL CHANGE FAILURE message to the network.
If the mobile station was in uplink packet transfer before the cell change, the mobile station shal... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.1.4.1.2 Conformance requirement for Rel-6 and later | The mobile station shall regard the network controlled cell reselection procedure as successfully completed when it has performed access and successfully completed contention resolution in the new cell.
In the following cases, the mobile station shall determine that the network controlled cell reselection procedure has... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.1.4.2 Test Purpose | To verify that the mobile station initiates a random access to the old cell, if the contention resolution procedure fails on the new cell. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.1.4.3 Method of test | Initial conditions
System Simulator:
2 cells (cell A, cell B), activated at power-on , GPRS supported.
Mobile Station:
MS is in Packet Idle mode and GPRS attached. Ready timer is set to 44 seconds
PDP context established.
Specific PICS Statements
-
PIXIT Statements
-
Foreseen final state of the MS
- MS is in Transfer m... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.1.5 Void | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.1.6 Cell change order procedure / Uplink transfer / Failure cases / Frequency not implemented | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.1.6.1 Conformance requirement | If the network message instructs the mobile station to use a frequency that it is not capable of using, the mobile station shall send a PACKET CELL CHANGE FAILURE message with cause "frequency not implemented" and remain on the current PDCH(s). |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.1.6.2 Test Purpose | To verify that the mobile station returns a PACKET CELL CHANGE FAILURE message, if the ordered frequency cannot be used.
Reference
3GPP TS 04.60, subclause 8.4.2. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.1.6.3 Method of test | System Simulator:
1 cell, GPRS supported.
Mobile Station:
MS is in Packet Idle mode and GPRS attached.
PDP context established.
Specific PICS Statements
-
PIXIT Statements
-
Foreseen final state of the MS
- MS is in Transfer mode.
Test procedure
MS is brought into uplink packet transfer mode. SS sends the PACKET CELL C... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.2 Cell change order procedure / Downlink transfer | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.2.1 Cell change order procedure / Downlink transfer / Normal case | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.2.1.1 Conformance requirement | The cell change order procedure is started by sending a PACKET CELL CHANGE ORDER message to the mobile station on the PCCCH or PACCH. Upon receipt of the PACKET CELL CHANGE ORDER message the mobile station shall start timer T3174.
When a cell reselection is made controlled by the network, the mobile station shall act u... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.2.1.2 Test Purpose | To verify that when NC2 is commanded, the MS sends PACKET MEASUREMENT REPORT messages, in which both the serving and non-serving cells are reported.
To verify that the cell change order procedure is started when the MS receives a PACKET CELL CHANGE ORDER message.
To verify that the MS switches to the new cell.
To verif... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.2.1.3 Method of test | Initial conditions
System Simulator:
2 cells (cell A, cell B), activated at power-on, GPRS supported.
Mobile Station:
MS is in Packet Idle mode and GPRS attached.
PDP context established.
Specific PICS Statements
-
PIXIT Statements
-
Foreseen final state of the MS
- MS is in Transfer mode.
Test procedure
MS is brought ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.2.2 Cell change order procedure / Downlink transfer / Failure cases / REJECT from the new cell | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.2.2.1 Conformance requirement | If a PACKET ACCESS REJECT message is received from the new cell, the mobile station shall start timer T3176, return to the old cell and send a PACKET CELL CHANGE FAILURE message to the network.
If the mobile station was in downlink packet transfer mode before the cell change, the mobile station shall initiate a random ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.2.2.2 Test Purpose | To verify that the mobile station sends a PACKET CELL CHANGE FAILURE message to the network in the old cell, if a IMMEDIATE ASSIGNMENT REJECT message is received from the new cell.
Reference
3GPP TS 04.60, subclause 8.4.1. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.2.2.3 Method of test | Initial conditions
System Simulator:
2 cells (cell A, cell B), activated at power-on GPRS supported.
Mobile Station:
MS is in Packet Idle mode and GPRS attached. Ready Timer is deactivated.
PDP context 2 established.
Specific PICS Statements
-
PIXIT Statements
-
Foreseen final state of the MS
- MS is in idle mode.
Test... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.2.3 Cell change order procedure / Downlink transfer / Failure cases / Frequency not implemented | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.2.3.1 Conformance requirement | If the network message instructs the mobile station to use a frequency that it is not capable of using, the mobile station shall send a PACKET CELL CHANGE FAILURE message and remain on the current PDCH(s). |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.2.3.2 Test Purpose | To verify that the mobile station returns a PACKET CELL CHANGE FAILURE message if it is not capable of using the ordered frequency.
Reference
3GPP TS 04.60, subclause 8.4.2. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.2.3.3 Method of test | Initial conditions
System Simulator:
1 cell, GPRS supported.
Mobile Station:
MS is in Packet Idle mode and GPRS attached.
PDP context established.
Specific PICS Statements
-
PIXIT Statements
-
Foreseen final state of the MS
- MS is in idle mode.
Test procedure
MS is brought into downlink packet transfer mode. SS sends ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.3 Cell change order procedure / Simultaneous uplink and downlink transfer | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.3.1 Cell change order procedure / Simultaneous uplink and downlink transfer / Normal case | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.3.1.1 Conformance requirement | The cell change order procedure is started by sending a PACKET CELL CHANGE ORDER message to the mobile station on the PCCCH or PACCH. Upon receipt of the PACKET CELL CHANGE ORDER message the mobile station shall start timer T3174.
When a cell reselection is made controlled by the network, the mobile station shall act u... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.3.1.2 Test Purpose | To verify that when the cell change order procedure is started by sending a PACKET CELL CHANGE ORDER message, the MS shall abort any TBF in progress and stop transmitting.
To verify that the MS shall switch to the new cell.
To verify that the MS shall act upon the IMMEDIATE_REL value.
Reference
3GPP TS 04.60, subclause... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.3.1.3 Method of test | Initial conditions
System Simulator:
2 cells (cell A, cell B), activated at power-on, GPRS supported.
Mobile Station:
MS is in Packet Idle mode and GPRS attached.
PDP context 2 established.
Specific PICS Statements
-
PIXIT Statements
-
Foreseen final state of the MS
- MS is in simultaneous uplink and downlink packet tr... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.3.2 Void | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.3.3 Void | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.3.4 Packet Measurement order procedure / Downlink transfer / Normal case/ Routing Area Update/ NMO II | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.3.4.1 Conformance requirement | The cell change order procedure is started by sending a PACKET CELL CHANGE ORDER message to the mobile station on the PCCCH or PACCH. Upon receipt of the PACKET CELL CHANGE ORDER message the mobile station shall start timer T3174.
When a cell reselection is made controlled by the network, the mobile station shall act u... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.3.4.2 Test Purpose | To test the behaviour of the MS when the network triggers a Packet Cell Change Order to a cell belonging to another routing area, whereas the network mode of operation II is active, i.e.:
- To verify that the cell change order procedure is started when the MS receives a PACKET CELL CHANGE ORDER message.
- To verify tha... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.3.4.3 Method of test | Initial conditions
System simulator:
2 cells, GPRS supported, Carrier 1 is active, at –60dBm. Carrier 2 is on, at low level –70dBm (in order to prevent sync reading suspension due to unsuccessful synchronization attempts). PBCCH is not present on Cell A (Carrier 1), and not present on Cell B (Carrier 2). NETWORK_CONTRO... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.3.5 Packet Measurement order procedure / Downlink transfer / Normal case/ Routing Area Update/ NMO I | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.3.5.1 Conformance requirement | The cell change order procedure is started by sending a PACKET CELL CHANGE ORDER message to the mobile station on the PCCCH or PACCH. Upon receipt of the PACKET CELL CHANGE ORDER message the mobile station shall start timer T3174.
When a cell reselection is made controlled by the network, the mobile station shall act u... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.3.5.2 Test Purpose | To test the behaviour of the MS when the network triggers a Packet Cell Change Order to a cell belonging to another routing area, whereas the network mode of operation 1 is active, i.e.:
To verify that the cell change order procedure is started when the MS receives a PACKET CELL CHANGE ORDER message.
To verify that the... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.3.5.3 Method of test | Initial conditions
System simulator:
2 cells, GPRS supported, Carrier 1 is active, at –60dBm. Carrier 2 is on, at low level –70dBm (in order to prevent sync reading suspension due to unsuccessful synchronization attempts). NETWORK_CONTROL_ORDER is set to NC0, and Network Mode of Operation is set to NMO I, on both Carri... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.3.6 MT CS establishment whilst in NC2 with a downlink TBF established | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.3.6.1 Conformance requirements | The behaviour of the mobile station is controlled by the NETWORK_CONTROL_ORDER parameter in a PACKET MEASUREMENT ORDER message. The reporting periods are indicated in the NC_REPORTING_PERIOD_T field of the PACKET MEASUREMENT ORDER message. The mobile station shall apply to the timer T3158 the NC_REPORTING_PERIOD_T when... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.3.6.2 Test purpose | To verify that the MS sends the measurement report of the NC measurements according to the indicated reporting periods, when the T3158 expires. To verify that the MS reacts to CS paging on the PACCH, whilst the MS was in packet transfer mode and NC2, by releasing the downlink TBF and then establishing an RR connection. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.3.6.3 Method of test | Initial Conditions
System Simulator:
2 cells, GPRS supported, NMO I activated, CTRL_ACK_TYPE=0 in SI13.
Mobile Station:
The MS is in packet idle mode, with a TMSI, P-TMSI allocated and PDP context 1 activated.
Specific PICS Statements
- GPRS Release Supported (TSPC_MS_GPRS_RELEASE)
- Support of Immediate Connect (TSPC_... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.3.7 MT CS establishment whilst in NC2 with a uplink TBF established | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.3.7.1 Conformance requirements | The behaviour of the mobile station is controlled by the NETWORK_CONTROL_ORDER parameter in a PACKET MEASUREMENT ORDER message. The reporting periods are indicated in the NC_REPORTING_PERIOD_T field of the PACKET MEASUREMENT ORDER message. The mobile station shall apply to the timer T3158 the NC_REPORTING_PERIOD_T when... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.3.7.2 Test purpose | To verify that the MS sends packet measurement reports of the NC measurements according to the indicated reporting periods when T3158 expires. To verify that the MS reacts to CS paging on the PACCH, whilst the MS was in packet transfer mode and NC2, by releasing the uplink TBF and then establishing the RR connection. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.2.3.7.3 Method of test | Initial Conditions
System Simulator:
2 cells, GPRS supported, NMO I activated.
Mobile Station:
The MS is in packet idle mode, with a TMSI, P-TMSI allocated and PDP context 2activated.
NOTE: carrier 2 is activated in order to prevent synchronisation reading suspension due to unsuccessful synchronization attempts.
Specif... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.3 Macros and Default Message contents | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.3.1 Macros | In order to simplify the process of writing and coding test cases, macros are referenced in the expected signalling tables. These macros provide all additional signalling needed to complete the particular test but are not relevant to its purpose. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.3.1.1 Void | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.3.1.2 Void | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.3.2 Default Messages | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.3.2.1 PACKET CELL CHANGE ORDER message | MESSAGE_TYPE
0000 01
PAGE_MODE
00 Normal Paging
Referenced Address
-
10 (address is TLLI)
- TLLI
same as the value received from MS
IMMEDIATE_REL
1 (Immediate release of the on-going TBF.)
ARFCN
For GSM 900: 00 0001 0100 (ARFCN 20)
For DCS 1 800 and PCS 1 900: 10 0100 1110 (ARFCN 590)
For GSM 700, T-GSM 810: 01 1100 ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.3.2.2 PACKET CELL CHANGE FAILURE message | MESSAGE_TYPE
0000 00
TLLI
same as the value received from MS
ARFCN
For GSM 900: 00 0001 0100 (ARFCN 20)
For DCS 1 800 and PCS 1 900: 10 0100 1110 (ARFCN 590)
For GSM 700, T-GSM 810: 01 1100 1001 (ARFCN 457)
For GSM 850: 00 1001 0011 (ARFCN 147)
BSIC
For GSM 700, T-GSM 810, GSM 850 and GSM 900: 001101
For DCS 1 800 and ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.3.2.3 PACKET MEASUREMENT ORDER message | MESSAGE_TYPE
0000 11
PAGE_MODE
00 Normal Paging
TLLI
10 (address is TLLI)
-
Same as the value received from MS
PMO_INDEX
0 0 0 first message
PMO_COUNT
0 0 0 one message expected
{ 0 | 1 < NC Measurement Parameters }
1 NC Measurement Parameters available
NC Measurement Parameters
NETWORK_CONTROL_ORDER
0 1 NC1
{ 0 | ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.4 Cell Change Order Procedures without PBCCH | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.4.1 Network Controlled Cell Reselection – Packet Measurement Order Procedure | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.4.4.1.1 Conformance requirement | A cell re-selection command may be sent from the network to an MS. When the MS receives the command, it shall immediately re-select the cell according to the included cell description and change the network control mode according to the command.
Reference:
3GPP TS 04.60 subclause 8.4.0.
3GPP TS 05.08 subclause 10.1.4.2... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.