hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.2.1 Extended Dynamic Allocation / Uplink Transfer / Normal | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.2.1.1 Extended Dynamic Allocation / Uplink Transfer / Normal / Successful | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.2.1.1.1 Conformance requirements | The mobile station shall monitor the downlink PDCHs corresponding to (i.e. with the same timeslot number as) its assigned uplink PDCHs starting with the lowest numbered PDCH, then the next lowest numbered PDCH, etc., up to the one corresponding to the highest numbered assigned uplink PDCH.
Whenever the mobile station d... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.2.1.1.2 Test purposes | To verify that the MS:
When the MS receives the assigned USF of the lowest assigned PDCH, it transmits RLC/MAC data block on the same and all higher PDCHs in the next TDMA frame. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.2.1.1.3 Method of test | Initial Conditions
System Simulator:
1 cell, default setting,
Mobile Station:
The MS is GPRS attached with a P-TMSI allocated and the test PDP context 2 activated.
Specific PICS Statements
- The GPRS multislot class supported (TSPC_Type_GPRS_Multislot_ClassX, where X = 1..45)
PIXIT Statements
-
Test Procedure
The MS is... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.2.1.2 Extended Dynamic Allocation / Uplink Transfer / Normal / USF_GRANULARITY = 4 blocks | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.2.1.2.1 Conformance requirements | The number of RLC/MAC blocks to transmit on each PDCH is controlled by the USF_GRANULARITY parameter characterising the uplink TBF. The mobile station shall ignore the USF on those higher numbered PDCHs during the block period where the assigned USF value is detected. In addition, if USF_GRANULARITY is set to four bloc... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.2.1.2.2 Test purposes | To verify that the MS:
Manages the USF_GRANULARITY when an uplink TBF is established in Extended Dynamic allocation mode. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.2.1.2.3 Method of test | Initial Conditions
System Simulator:
1 cell, default setting,
Mobile Station:
The MS is GPRS attached with a P-TMSI allocated and the test PDP context2 activated.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
The MS is triggered to initiate packet uplink transfer data in RLC acknowledged mode. The SS ord... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.2.1.3 Extended Dynamic Allocation / Uplink Transfer / Normal / Allocation via polling mechanism | 42.9.2.1.3.1 Conformance requirements
During the block period where an uplink radio block is allocated on a PDCH via the polling mechanism (see sub-clause 10.4.4), the mobile station shall monitor for the assigned USF on the downlink PDCHs corresponding to its assigned uplink PDCHs starting with the lowest numbered ass... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.2.1.3.2 Test purposes | To verify that the MS:
The MS sends the uplink control block allocated on the PDCH via the polling mechanism, while continuing to monitor the correct USFs. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.2.1.3.3 Method of test | Initial Conditions
System Simulator:
1 cell, default setting,
Mobile Station:
The MS is GPRS attached with a P-TMSI allocated and the test PDP context2 activated.
Specific PICS Statements
- The GPRS multislot class supported (TSPC_Type_GPRS_Multislot_ClassX, where X = 1..45)
PIXIT Statements
-
Test Procedure
The MS is ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.2.1.4 Extended Dynamic Allocation / Uplink Transfer / Normal / PACCH operation in downlink | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.2.1.4.1 Conformance requirements | The mobile station shall attempt to decode every downlink RLC/MAC block on the lowest numbered timeslot in the PDCH allocation. Whenever the mobile station receives a RLC/MAC block containing a RLC/MAC control block, the mobile station shall attempt to interpret the message contained therein. If the message addresses t... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.2.1.4.3 Method of test | Initial Conditions
System Simulator:
1 cell, default setting.
Mobile Station:
The MS is GPRS attached with a P-TMSI allocated and the test PDP context 2 activated.
Specific PICS Statements
- The GPRS multislot class supported (TSPC_Type_GPRS_Multislot_ClassX, where X = 1..45)
PIXIT Statements
-
Test Procedure
The MS is... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.2.1.5 Extended Dynamic Allocation / Uplink Transfer / Normal / Polling for PDAN | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.2.1.5.1 Conformance requirements | In case of simultaneous uplink and downlink TBFs and extended dynamic allocation, the network may apply polling in downlink RLC data blocks only when sent on a PDCH common for both reception and transmission. A mobile station operating with extended dynamic allocation need to respond to polling in downlink RLC data blo... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.2.1.5.3 Method of test | Initial Conditions
System Simulator:
1 cell, default setting.
Mobile Station:
The MS is GPRS attached with a P-TMSI allocated and the test PDP context 2 activated.
Specific PICS Statements
- The GPRS multislot class supported (TSPC_Type_GPRS_Multislot_ClassX, where X = 1..45)
PIXIT Statements
-
Test Procedure
The MS is... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.2.2 Extended Dynamic Allocation / Uplink Transfer / Configuration Change | 42.9.2.2.1 Extended Dynamic Allocation / Uplink Transfer / configuration change / Changes in the Allocation from Dynamic to Extended Dynamic. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.2.2.1.1 Conformance requirements | When the mobile station receives an uplink assignment (e.g. PACKET UPLINK ASSIGNMENT, MULTIPLE TBF UPLINK ASSIGNMENT, PACKET TIMESLOT RECONFIGURE or MULTIPLE TBF TIMESLOT RECONFIGURE) that does not contain a TBF starting time, the mobile station shall begin monitoring the assigned PDCHs for the assigned USF value for ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.2.2.1.2 Test purposes | To verify that the MS while on Uplink TBF in Dynamic Allocation mode receives a PACKET UPLINK ASSIGNMENT giving an extended Dynamic Allocation mode continues the TBF in Extended Dynamic Allocation. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.2.2.1.3 Method of test | Initial Conditions
System Simulator:
1 cell, default settings.
Mobile Station:
The MS is GPRS attached with a P-TMSI allocated and the test PDP context 2 activated.
Specific PICS Statements
- The GPRS multislot class supported (TSPC_Type_GPRS_Multislot_ClassX, where X = 1..45)
PIXIT Statements
-
Test Procedure
The MS i... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.2.2.2.1 Conformance requirements | When the mobile station receives an uplink assignment (e.g. PACKET UPLINK ASSIGNMENT, MULTIPLE TBF UPLINK ASSIGNMENT, PACKET TIMESLOT RECONFIGURE or MULTIPLE TBF TIMESLOT RECONFIGURE) that does not contain a TBF starting time, the mobile station shall begin monitoring the assigned PDCHs for the assigned USF value for ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.2.2.2.2 Test purposes | To verify that the MS while on Uplink TBF in Extended Dynamic Allocation mode receives a PACKET UPLINK ASSIGNMENT giving a Dynamic Allocation mode continues the TBF in Dynamic Allocation. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.2.2.2.3 Method of test | Initial Conditions
System Simulator:
1 cell, default settings.
Mobile Station:
The MS is GPRS attached with a P-TMSI allocated and the test PDP context 2 activated.
Specific PICS Statements
- The GPRS multislot class supported (TSPC_Type_GPRS_Multislot_ClassX, where X = 1..45)
PIXIT Statements
-
Test Procedure
The MS i... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.2.2.3.1 Conformance requirements | When the mobile station receives an uplink assignment (e.g. PACKET UPLINK ASSIGNMENT, MULTIPLE TBF UPLINK ASSIGNMENT, PACKET TIMESLOT RECONFIGURE or MULTIPLE TBF TIMESLOT RECONFIGURE) that does not contain a TBF starting time, the mobile station shall begin monitoring the assigned PDCHs for the assigned USF value for ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.2.2.3.2 Test purposes | To verify that the MS:
While in extended Dynamic mode TBF, if the number of slots allocated is reduced by using PACKET UPLINK ASSIGNMENT, then MS adheres to the new allocation properly. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.2.2.3.3 Method of test | Initial Conditions
System Simulator:
1 cell, default setting,
Mobile Station:
The MS is GPRS attached with a P-TMSI allocated and the test PDP context 2 activated.
Specific PICS Statements
- The GPRS multislot class supported (TSPC_Type_GPRS_Multislot_ClassX, where X = 1..45)
PIXIT Statements
-
Test Procedure
The MS is... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.2.2.4.1 Conformance requirements | When the mobile station receives an uplink assignment (e.g. PACKET UPLINK ASSIGNMENT, MULTIPLE TBF UPLINK ASSIGNMENT, PACKET TIMESLOT RECONFIGURE or MULTIPLE TBF TIMESLOT RECONFIGURE) that does not contain a TBF starting time, the mobile station shall begin monitoring the assigned PDCHs for the assigned USF value for ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.2.2.4.2 Test purposes | To verify that the MS:
While in extended Dynamic mode TBF, if the number of slots allocated is reduced by using PACKET PDCH RELEASE, then MS adheres to the new allocation properly. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.2.2.4.3 Method of test | Initial Conditions
System Simulator:
1 cell, default setting,
Mobile Station:
The MS is GPRS attached with a P-TMSI allocated and the test PDP context 2 activated.
Specific PICS Statements
- The GPRS multislot class supported (TSPC_Type_GPRS_Multislot_ClassX, where X = 1..45)
PIXIT Statements
-
Test Procedure
The MS is... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.2.2.5.1 Conformance requirements | When the mobile station receives an uplink assignment (e.g. PACKET UPLINK ASSIGNMENT, MULTIPLE TBF UPLINK ASSIGNMENT, PACKET TIMESLOT RECONFIGURE or MULTIPLE TBF TIMESLOT RECONFIGURE) that does not contain a TBF starting time, the mobile station shall begin monitoring the assigned PDCHs for the assigned USF value for ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.2.2.5.2 Test purposes | To verify that the MS:
While in extended Dynamic mode TBF, if the number of slots is increased then MS adheres to the new allocation properly. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.2.2.5.3 Method of test | Initial Conditions
System Simulator:
1 cell, default setting,
Mobile Station:
The MS is GPRS attached with a P-TMSI allocated and the test PDP context 2 activated.
Specific PICS Statements
- The GPRS multislot class supported (TSPC_Type_GPRS_Multislot_ClassX, where X = 1..45)
PIXIT Statements
-
Test Procedure
The MS is... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.3 Extended Dynamic Allocation / Shifted USF | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.3.1 Extended Dynamic Allocation / Shifted USF / Normal | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.3.1.1 Extended Dynamic Allocation / Shifted USF / Normal / PACCH management | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.3.1.1.1 Conformance requirements | When Shifted USF operation is used, PACCH operation shall be as described in sub-clause 8.1.1.2.2 except that the network shall transmit all PACCH messages on the PDCH carried on the second lowest numbered timeslot in the allocation, and the mobile station shall attempt to decode every downlink RLC/MAC block on the sec... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.3.1.1.2 Test purposes | To verify that when the MS is configured for a multi-slot uplink data transfer with shifted USF operation in use, it will decode a PACCH message sent to the MS on the second lowest numbered timeslot in the PDCH assignment. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.3.1.1.3 Method of test | Initial Conditions
System Simulator:
1 cell, default setting,
Mobile Station:
The MS is GPRS attached with a P-TMSI allocated and the test PDP context 2 activated.
Specific PICS Statements
- The GPRS multislot class supported (TSPC_Type_GPRS_Multislot_ClassX, where X = 1..45)
PIXIT Statements
-
Test Procedure
The MS is... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.3.1.2 Extended Dynamic Allocation / Shifted USF / Normal / USF assignment on 2nd PDCH | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.3.1.2.1 Conformance requirements | When Shifted USF operation is used, the USF for the first assigned PDCH shall be sent on the second assigned PDCH. The MS shall monitor the second assigned PDCH for the USF corresponding to both the first assigned PDCH and the second assigned PDCH. If the USF corresponding to the first assigned PDCH is detected then th... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.3.1.2.2 Test purposes | To verify that the MS:
In a multi-slot uplink data transfer with shifted USF operation in use, the USF for the 1st and 2nd assigned PDCH’s are monitored and detected by the MS on the 2nd assigned PDCH, and otherwise operation is as for normal Extended Dynamic Allocation. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.3.1.2.3 Method of test | Initial Conditions
System Simulator:
1 cell, default setting,
Mobile Station:
The MS is GPRS attached with a P-TMSI allocated and the test PDP context 2 activated.
Specific PICS Statements
- The GPRS multislot class supported (TSPC_Type_GPRS_Multislot_ClassX, where X = 1..45)
PIXIT Statements
-
Test Procedure
The MS is... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.3.1.3 Extended Dynamic Allocation / Shifted USF / Normal / Release of 2nd PDCH | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.3.1.3.1 Conformance requirements | 1. If a PACKET PDCH RELEASE message releases the second PDCH in the current timeslot configuration of a mobile station using Shifted USF operation then the first timeslot shall be considered released. If any PDCHs remain in the new timeslot configuration then normal USF operation shall continue starting on the lowest a... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.3.1.3.2 Test purposes | To verify that when the MS is performing a multi-slot uplink data transfer with shifted USF operation in use, and a PACKET PDCH RELEASE message is received that releases the second PDCH, then the MS will:
- stop transmitting on the first and second PDCH within the required reaction time, and
- continue data transfer us... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.9.3.1.3.3 Method of test | Initial Conditions
System Simulator:
1 cell, default setting,
Mobile Station:
The MS is GPRS attached with a P-TMSI allocated and the test PDP context 2 activated.
Specific PICS Statements
- The GPRS multislot class supported (TSPC_Type_GPRS_Multislot_ClassX, where X = 1..45)
PIXIT Statements
-
Test Procedure
The MS is... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.10 EC-GSM-IoT | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.10.1 EC-GSM-IoT / Packet Uplink Assignment | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.10.1.1 EC-GSM-IoT / Packet Uplink Assignment /Successful / CCCH | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.10.1.1.1 Conformance requirements | The establishment of an EC Temporary Block Flow (EC TBF), for a mobile station that has enabled EC operation, is performed on the EC-CCCH. It can be initiated by either the mobile station or the network. The establishment of an EC TBF can also be performed on the CCCH if the mobile station has selected Coverage Class 1... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.10.1.1.2 Test purpose | 1. The MS is triggered to initiate packet uplink transfer data in EC operation with FUA
2. Overlaid CDMA
3. Verify CCCH is used instead of EC-CCCH |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.10.1.1.3 Method of test | Initial Conditions
System Simulator:
- 1 cell, EC-GSM-IoT. The MS is GPRS attached. RACH Access Control =1 in EC-SCH
Mobile Station:
- The MS is switched off.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
To verify that the MS:
1. Sends the EC-RACH on RACH channel due to RACH access control configured to... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.10.1.2 EC-GSM-IoT / Packet Uplink Assignment /Successful / During Downlink ongoing | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.10.1.2.1 Conformance requirements | When the mobile station receives a Fixed Uplink Allocation, FUA, in e.g. the EC PACKET UPLINK ASSIGNMENT or EC PACKET UPLINK ACK/NACK message it shall perform uplink transmissions according to that allocation. The uplink resources are allocated with respect to a BTTI configuration, the mobile station uplink coverage cl... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.10.1.2.2 Test purpose | 1. The MS is triggered to initiate packet uplink transfer data in EC operation with FUA during an ongoing downlink TBF
2. Overlaid CDMA |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.10.1.2.3 Method of test | Initial Conditions
System Simulator:
1 cell, EC-GSM-IoT. CC2 used.
Mobile Station:
The MS is GPRS attached.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
To verify that the MS:
1. Uplink is established during an ongoing downlink
2. Verify DL TBF terminates immediately after the UL TBF is requested
3. Ove... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.10.1.3 EC-GSM-IoT / Packet Uplink Assignment /Resource Assignment | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.10.1.3.1 Conformance requirements | STARTING_DL_TIMESLOT_OFFSET (2 bit field)
This field defines the timeslot number of the lowest timeslot included in the assignment that is used for transfer of downlink RLC/MAC control messages on the EC-PACCH during the UL EC TBF. The number of additional timeslots that are included in the downlink assignment depends ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.10.1.3.2 Test purpose | To verify that the parameter STARTING_DL_TIMESLOT_OFFSET is properly used when uplink and downlink coverage classes are different and at least one of them is CC1. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.10.1.3.3 Method of test | Initial Conditions
System Simulator:
1 cell, EC-GSM-IoT
Mobile Station:
The MS is GPRS attached. In EC Operation mode in CC1 (UL and DL)
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
The MS triggers and uplink data transfer. A downlink data transfer is requested by the network and different type of cover... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.10.1.4 EC-GSM-IoT / Packet Uplink Assignment /Resource Assignment / Gap | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.10.1.4.1 Conformance requirements | The mobile station in EC TBF mode may include an EC Channel Request Description in the EC PACKET DOWNLINK ACK/NACK message in order to request an uplink TBF. The network may then establish an uplink EC TBF for the mobile station by sending an EC PACKET UPLINK ASSIGNMENT message, in which case the downlink EC TBF is re... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.10.1.4.2 Test purpose | To verify that the Timeslot allocation and position in the TDMA Frame used to transmit the UL RLC data block are done according the defined parameters in the EC PACKET UPLINK ASSIGNMENT |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.10.1.4.3 Method of test | Initial Conditions
System Simulator:
- 1 cell, EC-GSM-IoT.
Mobile Station:
- The MS is GPRS attached. In EC Operation mode in CC1 (UL and DL)
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
An uplink transfer is triggered during an EC DL TBF.
The SS sends an EC PACKET UPLINK ASSIGNMENT to handle the MS req... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.10.1.5 EC-GSM-IoT / Packet Uplink Assignment /Downlink Coverage Class Adaptation/ T3248 | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.10.1.5.1 Conformance requirements | When timer T3226 expires, the mobile station shall monitor the EC-PACCH according to its assigned downlink coverage class and, as long as T3228 is running, attempt to decode every downlink RLC/MAC block on the PDCHs corresponding to the downlink assigned EC-PACCH resources.
Whenever the mobile station receives an RLC/M... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.10.1.5.2 Test purpose | To verify that in EC operation, if T3248 is used and running, the MS will monitor the DL EC_PACCH using the next higher DL coverage Class (if any). |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.10.1.5.3 Method of test | Initial Conditions
System Simulator:
1 cell, EC-GSM-IoT. T3248 set to 3 secs
Mobile Station:
The MS is GPRS attached. In EC Operation mode in CC1 (UL and DL)
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
The MS is set to trigger an UL data transfer.
Following the last radio block transmitted according to... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.10.1.6 EC-GSM-IoT / Packet Uplink Assignment /Downlink Coverage Class Adaptation/ T3248 or T3228 Expiry | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.10.1.6.1 Conformance requirements | If timer T3228 expires, the mobile station shall release the ongoing uplink TBF and may perform an abnormal release with access retry, unless timer T3248 (sent in EC-SI) is used. If T3248 is used, i.e. it has a value > 0, the mobile station shall instead start timer T3248 and continue to monitor the DL EC-PACCH using t... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.10.1.6.2 Test purpose | To verify that in EC operation, if T3248 is used and running, the MS will monitor the DL EC_PACCH using the next higher DL coverage Class (if any). |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.10.1.6.3 Method of test | Initial Conditions
System Simulator:
1 cell, EC-GSM-IoT. T3248 set to 3 secs
Mobile Station:
The MS is GPRS attached. In EC Operation mode in CC1 (UL and DL)
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
The MS is set to trigger an UL data transfer.
Following the last radio block transmitted according to... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.10.2 EC-GSM-IoT / Packet Downlink Assignment | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.10.2.1 EC-GSM-IoT / Packet Downlink Assignment / Successful / T3238 | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.10.2.1.1 Conformance requirements | The purpose of network initiated TBF establishment is to establish a TBF to support the transfer of upper layer PDUs in the direction from the network to the mobile station. The procedure is triggered by a request from upper layers on the network side to transfer an upper layer PDU to a mobile station in packet idle mo... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.10.2.1.2 Test purpose | To verify that the MS:
1. Start a Uplink TBF
2. Send FAI for the Uplink with a value of the T3238
3. Establish a downlink TBF before expire of T3238 |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.10.2.1.3 Method of test | Initial Conditions
System Simulator:
1 cell, EC-GSM-IoT.
Mobile Station:
The MS is GPRS attached.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
The MS triggers an UL data transfer in EC Operation mode. The SS acknowledges all the UL data blocks and activate T3238.
The MS shall monitor the DL EC-PACCH for... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.10.3.1 EC-GSM-IoT / Contention resolution / Enhanced Access Burst procedure | The contention resolution is completed on the mobile station side when the mobile station receives a PACKET UPLINK ASSIGNMENT message with the same TLLI as the mobile station has included in the PACKET RESOURCE REQUEST message. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.10.3.1.1 Conformance requirements | The TLLI is used to uniquely identify the mobile station when sending on the uplink. A mobile station, that has enabled EC operation, includes its TLLI in one or several of the uplink blocks that are transmitted during the establishment of an EC TBF, depending on what packet access procedure is used.
The contention res... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.10.3.1.2 Test purpose | To verify that the MS uses the Enhanced Access Burst procedure when indicated by the network. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 42.10.3.1.3 Method of test | Initial conditions
System Simulator:
1 cell, EC-GSM-IoT supported
Mobile Station:
The MS is GPRS attached and in packet idle mode. PDP context 1 has been established.
Specific PICS Statements
-
PIXIT Statements
-
Test procedure
The MS is triggered to initiate uplink data transfer. The SS responds with EC IMMEDIATE ASSI... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1 Acknowledged Mode | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.1 Acknowledged mode / Uplink TBF | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.1.1 Acknowledged mode / Uplink TBF / Send state variable V(S) | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.1.1.1 Conformance requirements | 1. The send state variable, V(S), can take on the values 0 through 127. Each RLC data block contains a block sequence number (BSN) field that is 7 bits in length. At the time that an in-sequence RLC data block is designated for transmission, the value of BSN is set equal to the value of the send state variable.
2. V(S)... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.1.1.2 Test purpose | 1. To verify that the mobile station sets the V(S) to 0 at the beginning of each TBF.
2. To verify that the mobile station increases the V(S) by 1 after transmission of the RLC data block with BSN set to V(S).
3. To verify that the mobile station wraps the V(S) to 0 after 127. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.1.1.3 Method of test | Initial Conditions
System Simulator:
1 cell, default setting, PBCCH not present
Mobile Station:
The MS is GPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP context2 activated.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
The MS is made to send RLC data blocks. SS checks th... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.1.2 Acknowledged mode / Uplink TBF / Transmit window size | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.1.2.1 Conformance requirements | 1. V(S) shall not exceed V(A) modulo 128 by more than the maximum allowed number of outstanding RLC data blocks k (window size k is defined in 3GPP TS 04.60 subclause 9.1.9).
2. If V(S) = V(A) + k modulo 128 (i.e., the transmit window is stalled), the mobile station shall set the stall indicator to 1 in each RLC data b... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.1.2.2 Test purpose | 1. To verify that the mobile station sets the stall indicator to 1 in each RLC data block transmitted once the transmit window is stalled.
2. To verify that the mobile station retransmits data blocks that are pending acknowledgment.
3. To verify that the mobile station retransmits unacknowledged RLC data blocks in corr... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.1.2.3 Method of test | Initial Conditions
System Simulator:
1 cell, default setting, PBCCH not present.
Mobile Station:
The MS is GPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP Context2 activated.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
The MS transmits k (window size) blocks without ack... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.1.3 Acknowledged mode / Uplink TBF / Acknowledge state variable V(A) | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.1.3.1 Conformance requirements | 1. The Acknowledge state variable V(A) contains the BSN value of the oldest RLC data block that has not been positively acknowledged by its peer. V(A) can take on the values 0 through 127.
2. V(A) shall be set to the value 0 at the beginning of each TBF in which the RLC endpoint is the transmitter.
3. The value of V(A)... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.1.3.2 Test purpose | 1. To verify that the mobile station correctly decodes the RBB and updates the values of V(A). |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.1.3.3 Method of test | Initial Conditions
System Simulator:
1 cell, default setting, PBCCH not present.
Mobile Station:
The MS is GPRS updated with a P-TMSI allocated, SPLIT PG CYCLE negotiated and the test PDP Context2 activated.
Specific PICS Statements
-
PIXIT Statements
-
Test Procedure
1. The mobile station transmits k (window size) blo... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.1.4 Acknowledged mode / Uplink TBF / Negatively acknowledged RLC data blocks | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.1.4.1 Conformance requirements | 1. The transmitter shall transmit the oldest RLC data block whose corresponding element in V(B) indexed relative to V(A) has the value NACKED.
2. If [ V(S) < V(A) + k ] modulo 128 and no RLC data blocks have a corresponding element in V(B) with the value NACKED, the RLC data block with BSN = V(S) shall be transmitted.
... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 43.1.1.4.2 Test purpose | 1. To verify that the mobile station retransmits Nacked data blocks before transmission of new information.
2. To verify that the mobile station retransmits Nacked blocks in order of age, older first.
3. To verify that the mobile station only retransmit Nacked blocks once per negative acknowledgment. |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.