Episodes Preview fairino_fr5 Visualizer
99 episodes · 30 fps · 2 cameras · 640×480 av1

FR5 Pick Cube (2026-10-27, v2)

Teleoperated demonstrations on a Fairino FR5 6-DoF arm with a parallel gripper. Task: "pick up the cube and place it in the box".

Recorded with VR teleoperation and converted to the LeRobot v3.0 format.

Episodes 99 (single task, all successful)
Frames 49,369
FPS 30
Cameras top, wrist — 640×480, AV1
Format LeRobot codebase_version v3.0

Usage

from lerobot.datasets.lerobot_dataset import LeRobotDataset

ds = LeRobotDataset("benlee-robotics/fr5_pick_cube_20261027_v2")

Features

Key Shape Description
observation.state 10 Measured TCP pose [x, y, z, rot6d_0..5, gripper]
action 10 Commanded TCP pose, same layout as the state
observation.joint_pos 6 Measured joint angles joint_1..6 (rad)
observation.images.top 480×640×3 Fixed overhead camera
observation.images.wrist 480×640×3 Wrist-mounted camera

Conventions

  • Position: x, y, z of the TCP in the robot base frame, in meters.
  • Rotation (rot6d): the first two columns of the TCP rotation matrix, [R00, R10, R20, R01, R11, R21]. R = Rz(rz) · Ry(ry) · Rx(rx) built from the controller's rx, ry, rz Euler angles.
  • Gripper: normalized to [0, 1], where 0 is open and 1 is closed. In the state it is the measured position. In the action it is the commanded target.
  • Action: the teleop servo command (action_mode = command). Frames where the servo is not commanding motion (idle, clutch released, or during a gripper action) hold the measured pose.

Processing

Conversion settings are stored in fr5_conversion.json, together with per-episode camera sync and trim stats.

  • Trimming: idle time at the start and end of each episode is trimmed, keeping 0.25 s of padding.
  • Homing: the motion back to the home pose is excluded.
  • Failures: failed and incomplete episodes are excluded.
  • Dropped recordings: two raw recordings (episode_000054, episode_000055) had no teleoperated motion and were dropped.
Downloads last month
369