new

Get trending papers in your email inbox!

Subscribe

Daily Papers

byAK and the research community

Oct 20

Spin pumping by a moving domain wall at the interface of an antiferromagnetic insulator and a two-dimensional metal

A domain wall (DW) which moves parallel to a magnetically compensated interface between an antiferromagnetic insulator (AFMI) and a two-dimensional (2D) metal can pump spin polarization into the metal. It is assumed that localized spins of a collinear AFMI interact with itinerant electrons through their exchange interaction on the interface. We employed the formalism of Keldysh Green's functions for electrons which experience potential and spin-orbit scattering on random impurities. This formalism allows a unified analysis of spin pumping, spin diffusion and spin relaxation effects on a 2D electron gas. It is shown that the pumping of a nonstaggered magnetization into the metal film takes place in the second order with respect to the interface exchange interaction. At sufficiently weak spin relaxation this pumping effect can be much stronger than the first-order effect of the Pauli magnetism which is produced by the small nonstaggered exchange field of the DW. It is shown that the pumped polarization is sensitive to the geometry of the electron's Fermi surface and increases when the wave vector of the staggered magnetization approaches the nesting vector of the Fermi surface. In a disordered diffusive electron gas the induced spin polarization follows the motion of the domain wall. It is distributed asymmetrically around the DW over a distance which can be much larger than the DW width.

  • 1 authors
·
Nov 2, 2022

Hidden orbital polarization in diamond, silicon, germanium, gallium arsenide and layered materials

It was previously believed that the Bloch electronic states of non-magnetic materials with inversion symmetry cannot have finite spin polarizations. However, since the seminal work by Zhang et al. [Nat. Phys. 10, 387-393 (2014)] on local spin polarizations of Bloch states in non-magnetic, centrosymmetric materials, the scope of spintronics has been significantly broadened. Here, we show, using a framework that is universally applicable independent of whether hidden spin polarizations are small (e.g., diamond, Si, Ge, and GaAs) or large (e.g., MoS2 and WSe2), that the corresponding quantity arising from orbital - instead of spin - degrees of freedom, the hidden orbital polarization, is (i) much more abundant in nature since it exists even without spin-orbit coupling and (ii) more fundamental since the interband matrix elements of the site-dependent orbital angular momentum operator determines the hidden spin polarization. We predict that the hidden spin polarization of transition metal dichalcogenides is reduced significantly upon compression. We suggest experimental signatures of hidden orbital polarization from photoemission spectroscopies and demonstrate that the current-induced hidden orbital polarization may play a far more important role than its spin counterpart in antiferromagnetic information technology by calculating the current-driven antiferromagnetism in compressed silicon.

  • 2 authors
·
Aug 21, 2016

Current selects the helicity of a chiral phonon

The emergence of spin-polarized electrons from nonmagnetic chiral molecules and crystals is called Chirality-induced spin selectivity (CISS). A chiral phonon of definite wavevector q can strongly enhance it, but near equilibrium the two helicities +q and -q are equally populated: they are time-reversal partners and their contributions cancel. We show that in a biased chiral conductor the current causes the phonon of one helicity to damp less than the other. The damping asymmetry is odd in the current, odd under qrightarrow-q, invariant under a mirror that reverses the structural handedness, and equal, mode for mode, to the current-induced nonconservative Berry force on the phonon coordinate. Closing the phonon kinetics with a rate equation turns the asymmetry into a net lattice helicity: at any finite bias one helicity is preferentially populated, with no threshold, growing linearly with the current as Vrightarrow0; above a threshold that helicity becomes a self-sustained coherent travelling wave. We demonstrate this effect in elemental tellurium, treated as an open quantum system (electronic Hamiltonian, phonon bath, and electron-phonon coupling) within a quasi-ab initio framework. The electronic Hamiltonian is supplied by a vertex-corrected quasiparticle self-consistent GW (QSGW) potential with spin-orbit coupling; nuclear displacements are modeled with a machine-learned interatomic potential, which yields chiral phonon modes at finite pm q_z on the Γ-A line. The perturbation to the electronic Hamiltonian from a nuclear displacement is approximated by a frozen-phonon deformation potential. No optical pump is needed: a bias alone drives the current and selects the phonon helicity; reversing the current reverses the selection.

  • 3 authors
·
Oct 4

A new quantum hydrodynamic description of ferroelectricity in spiral magnets

The strong coupling between magnetism and ferroelectricity was found in rare earth manganites, where the electric polarization could be induced by special magnetic ordering. There is no theoretical model that would allow us to study the static and dynamic properties of electric polarization in strongly correlated magnetic dielectrics. In the presented research, we have taken the main step towards the construction of such a fundamental model, and made a direct connection between the microscopic Katsura-Nagaosa-Balatsky theory and Mostovoy's phenomenological model for magnetically induced polarization. A novel description of the ferroelectricity of spin origin is proposed within the framework of the many-particle quantum hydrodynamics method. It is applied to the study of cells of magnetic ions, where the electric dipole moment is proportional to the vector product of spins. Our approach is based on the many-particle Pauli equation, where the influence of an external magnetic field is considered. We define the electric dipole moment operator of the ion cell and introduce the macroscopic polarization as the quantum mechanical average of that operator. We formulate a model for the description of nonequilibrium polarization and derive a new polarization evolution equation. The polarization switching in ferroelectric magnets with the spiral spin-density-wave state is considered, and we demonstrate that the proposed model yields known results and can predict novel effects. The dynamic magnetoelectric effect can be investigated by employing this novel equation to study the evolution of polarization.

  • 3 authors
·
Nov 6, 2023

Theory of superconducting proximity effect in hole-based hybrid semiconductor-superconductor devices

Hybrid superconductor-semiconductor systems have received a great deal of attention in the last few years because of their potential for quantum engineering, including novel qubits and topological devices. The proximity effect, the process by which the semiconductor inherits superconducting correlations, is an essential physical mechanism of such hybrids. Recent experiments have demonstrated the proximity effect in hole-based semiconductors, but, in contrast to electrons, the precise mechanism by which the hole bands acquire superconducting correlations remains an open question. In addition, hole spins exhibit a complex strong spin-orbit interaction, with largely anisotropic responses to electric and magnetic fields, further motivating the importance of understanding the interplay between such effects and the proximity effect. In this work, we analyze this physics with focus on germanium-based two-dimensional gases. Specifically, we develop an effective theory supported by full numerics, allowing us to extract various analytical expressions and predict different types of superconducting correlations including non-standard forms of singlet and triplet pairing mechanisms with non-trivial momentum dependence; as well as different Zeeman and Rashba spin-orbit contributions. This, together with their precise dependence on electric and magnetic fields, allows us to make specific experimental predictions, including the emergence of f-type superconductivity, Bogoliubov Fermi surfaces, and gapless regimes caused by large in-plane magnetic fields.

  • 5 authors
·
Dec 30, 2024

Emergent magnetic nonanalyticity in Dirac altermagnets

Symmetry has long provided the organizing principle for understanding how materials respond to external perturbations. Here we show that what is permitted by symmetry need not be what actually emerges from the underlying system, and this distinction becomes particularly consequential for symmetry-related gapless Dirac fermions such as in altermagnets. A perturbation that shifts the Dirac points drives a Lifshitz reconstruction and generates an intrinsically nonanalytic effective potential, giving rise to undiscovered singular responses. In Dirac altermagnets, this nonanalyticity acquires a magnetic manifestation through C-paired spin-polarized Dirac cones: breaking the pairing symmetry C lifts their degeneracy and converts the associated Lifshitz reconstruction into an itinerant magnetization. As a consequence, piezomagnetism, the induction of a net magnetization by a mechanical strain, becomes nonlinear and nonanalytic, with Mproptosgn(varepsilon)varepsilon^2, whereas the linear response is absent despite being allowed by symmetry. Accordingly, the leading response cannot be inferred from the conventional symmetry-based paradigm of material response built upon the cornerstones of Neumann's principle and analytic Landau expansion. First-principles calculations identify the monolayer Fe_2S as a candidate material realization for such singular magnetic responses. These results suggest quantum singularities as a new degree of freedom for engineering material responses.

  • 6 authors
·
Oct 2

Can end-to-end learning from raw electronic structure explain magnetic anisotropy?

Machine-learning models trained directly on electronic spectra can predict spin--orbit-driven properties, yet models with comparable predictive accuracy may learn different electronic dependencies. We examine this problem using magnetic anisotropy in atomic-scale magnets and a validation strategy designed to assess the physical relevance of learned spectral relationships. We compare a bidirectional gated recurrent unit and a one-dimensional convolutional neural network, both trained to predict magnetic anisotropy energy (MAE) from spin- and orbital-resolved scalar-relativistic densities of states (SR-DOS). Despite comparable in-domain (ID) accuracy, the architectures learn only partly overlapping spectral dependencies. Shapley additive explanations identify spectral features shared between the two architectures that can be associated with plausible spin--orbit-coupling pathways consistent with second-order perturbation theory (PT2). Adding PT2-derived MAE contributions to the model inputs has little effect on ID performance but can improve transfer beyond the training domain, with gains differing between architectures. Controlled spectral perturbations further demonstrate that similar attribution patterns do not imply the same functional dependence of the predicted MAE on spectral weight. The contrasting responses provide a functional context for architecture-dependent out-of-domain transfer. End-to-end learning can identify candidate electronic signatures of magnetic anisotropy. Their credible microscopic interpretation, however, rests on convergent evidence from predictive performance, model comparison, physical theory, controlled spectral interventions, and evaluation under distribution shift.

  • 3 authors
·
Oct 7

Matters Arising from S. Vaitiekenas et al., "Zero-bias peaks at zero magnetic field in ferromagnetic hybrid nanowires" Nature Physics 2021

In 2021 Nature Physics published a paper by Vaitiekenas, Liu, Krogstrup and Marcus titled "Zero-bias peaks at zero magnetic field in ferromagnetic hybrid nanowires". The paper reports low temperature transport measurements on semiconductor InAs nanowires with two partly overlapping shells -- a shell of EuS, a magnetic insulator, and a shell of Al, a metal that becomes superconducting at temperatures below 1.2K. The paper claims that (1) the data are consistent with induced topological superconductivity and Majorana zero modes (MZMs), and (2) that this is facilitated by the breaking of the time reversal symmetry through a direct magnetic interaction with the EuS shell. In this Matters Arising, we present an alternative explanation which is based on trivial effects that are likely to appear in the reported geometry. Specifically, first, we find that data the authors present in support of the topological superconductivity claim can originate from unintended quantum dots in their devices, a widely known likely explanation that is not being discussed in the paper. Second, our analysis of the setup, supported by our numerical micromagnetic simulations, shows similar effects could be obtained due to stray magnetic fields from the region of the EuS shell damaged during Al etching. This basic picture should come before the exotic interpretation in terms of magnetic exchange interaction with a ferromagnetic insulator.

  • 6 authors
·
Jan 7, 2025

Doping the chiral spin liquid -- topological superconductor or chiral metal?

We point out that there are two different chiral spin liquid states on the triangular lattice and discuss the conducting states that are expected on doping them. These states labeled CS1 and CS2 are associated with two distinct topological orders with different edge states, although they both spontaneously break time reversal symmetry and exhibit the same quantized spin Hall conductance. While CSL1 is related to the Kalmeyer-Laughlin state, CSL2 is the ν=4 member of Kitaev's 16 fold way classification. Both states are described within the Abrikosov fermion representation of spins, and the effect of doping can be accessed by introducing charged holons. On doping CSL2, condensation of charged holons leads to a topological d+id superconductor. However on doping CSL1 , in sharp contrast , two different scenarios can arise: first, if holons condense, a chiral metal with doubled unit cell and finite Hall conductivity is obtained. However, in a second novel scenario, the internal magnetic flux adjusts with doping and holons form a bosonic integer quantum Hall (BIQH) state. Remarkably, the latter phase is identical to a d+id superconductor. In this case the Mott insulator to superconductor transition is associated with a bosonic variant of the integer quantum Hall plateau transition for the holon. We connect the above two scenarios to two recent numerical studies of doped chiral spin liquids on triangular lattice. Our work clarifies the complex relation between topological superconductors, chiral spin liquids and quantum criticality .

  • 3 authors
·
Nov 19, 2020

Complete Neural Electronic Initialization Accelerates Materials DFT

We present the first complete machine learning method for accelerating plane-wave density functional theory (DFT) in materials under the projector augmented wave (PAW) formalism. We formalize seven criteria that a Complete Neural Electronic Initializer must satisfy for practical end-to-end PAW DFT acceleration. Applying these criteria to prior work reveals two missing structure-dependent components, augmentation occupancies and spin initialization, that prevent existing methods from providing complete reference-free initialization. Controlled ablations show that omitting these components can eliminate or reverse the acceleration obtained via models that only predict the smooth valence density. We satisfy these missing requirements by introducing AugNet, the first general equivariant model for PAW augmentation occupancies, and the first general spin density model for materials, which predicts the smooth spin-difference density and spin-difference PAW augmentation occupancies using predicted magnetic moments to constrain the global magnetic state. Combined with existing valence density models, these components satisfy all seven criteria and form a fully reference-free electronic initializer for materials DFT, requiring no electronic quantities from a converged target calculation. Our method reduces end-to-end DFT wall time by up to ~25% on unseen structures while preserving converged energies.

  • 3 authors
·
Sep 17

Magnetic Anisotropy in Two-dimensional van der Waals Magnetic Materials and Their Heterostructures: Importance, Mechanisms, and Opportunities

Two-dimensional (2D) magnetism in atomically thin van der Waals (vdW) monolayers and heterostructures has attracted significant attention due to its promising potential for next-generation spintronic and quantum technologies. A key factor in stabilizing long-range magnetic order in these systems is magnetic anisotropy, which plays a crucial role in overcoming the limitations imposed by the Mermin-Wagner theorem. This review provides a comprehensive theoretical and experimental overview of the importance of magnetic anisotropy in enabling intrinsic 2D magnetism and shaping the electronic, magnetic, and topological properties of 2D vdW materials. We begin by summarizing the fundamental mechanisms that determine magnetic anisotropy, emphasizing the contributions from strong ligand spin-orbit coupling of ligand atoms and unquenched orbital magnetic moments. We then examine a range of material engineering approaches, including alloying, doping, electrostatic gating, strain, and pressure, that have been employed to effectively tune magnetic anisotropy in these materials. Finally, we discuss open challenges and promising future directions in this rapidly advancing field. By presenting a broad perspective on the role of magnetic anisotropy in 2D magnetism, this review aims to stimulate ongoing efforts and new ideas toward the realization of robust, room-temperature applications based on 2D vdW magnetic materials and their heterostructures.

  • 2 authors
·
Aug 6, 2025

Axial-metric/polar-gauge perturbations of the Maldacena-Milekhin-Popov wormhole

We study linear perturbations of the Maldacena-Milekhin-Popov (MMP) wormhole in the parity sector that pairs axial metric perturbations with polar gauge perturbations. It contains the axial gravitational mode and the electric field along the magnetic field lines. The lowest Landau level (LLL) of the charged fermions responds through its charge. The gauge components a_τ, a_ρ form a two-dimensional gauge field on the worldsheet of each field line, and the fermions respond with the exact Schwinger current. Lifted over the sphere, it gives the electric field the MMP screening mass m_S^2=αq^2, which is not small and survives in the mouth. In the throat the perturbation tilts the worldsheets, and the Casimir stress tensor acquires mixed components. Force balance then requires a current across the field lines, and charge conservation fixes an accompanying polarisation current, the counterpart of the Hall current of the polar sector. These currents close the Bianchi identities at first order in the fermionic backreaction α. The system reduces to three coupled master equations, given in closed form and matched to the fermion-free mouth. Consistency alone does not select the fermionic constitutive relation, but locality, covariance and the index theorem do. At α=0 the throat reduces to Poschl-Teller problems with masses l(l-1) and (l+1)(l+2) at m_S^2=0. At finite m_S^2 one mode is screened, one tends to the mass l^2+l+2, and one neutral charge-density wave stays exactly massless. The O(α) shifts of the massive normal frequencies are real and negative. The two parity sectors are isospectral only without fermions. The neutral channel sees an attractive region in each mouth, and a numerical solution coupled to the gravitational channel in the exact mouth potential finds no bound state. The sector has no growing mode for lge2 at this order.

  • 1 authors
·
Oct 6

Absence of universal backscattering immunity in reciprocal photonic waveguides

Suppressing parasitic back-reflection caused by imperfections, such as random defects, material inhomogeneities, localized inclusions, and fabrication-induced geometric deviations, has long been a central objective in optical-waveguide engineering. In this Letter, we theoretically establish that universal immunity to backscattering from arbitrary disorder is fundamentally impossible in reciprocal optical waveguides, irrespective of whether the underlying structure is topologically trivial or nontrivial.We establish this result through two complementary constructions of physically admissible reciprocal perturbations. The first considers weak permittivity perturbations of finite spatial extent within the first Born approximation, whereas the second considers optically small dielectric perturbations of finite contrast. In each construction, an admissible realization exists that produces a nonzero leading-order backward-scattering amplitude. We trace the fundamental origin of this limitation to the absence in photons of the intrinsic spin-1{2} and fermionic time-reversal structure underlying Kramers protection in electronic systems. Consequently, any mechanism that enforces photonic backscattering suppression throughout a prescribed class of disorder must instead be engineered into the underlying electromagnetic structure and its constitutive response, which can itself be modified by generic reciprocal perturbations. Numerical examples in representative reciprocal topological waveguides further illustrate these limitations for random defects and sharp bends. We further identify several constructive strategies for suppressing back-reflection within certain prescribed classes of disorder.

  • 9 authors
·
Oct 1

First-principles predictions of Hall and drift mobilities in semiconductors

Significant progress on parameter-free calculations of carrier mobilities in real materials has been made during the past decade; however, the role of various approximations remains unclear and a unified methodology is lacking. Here, we present and analyse a comprehensive and efficient approach to compute the intrinsic, phonon-limited drift and Hall carrier mobilities of semiconductors, within the framework of the first-principles Boltzmann transport equation. The methodology exploits a novel approach for estimating quadrupole tensors and including them in the electron-phonon interactions, and capitalises on a rigorous and efficient procedure for numerical convergence. The accuracy reached in this work allows to assess common approximations, including the role of exchange and correlation functionals, spin-orbit coupling, pseudopotentials, Wannier interpolation, Brillouin-zone sampling, dipole and quadrupole corrections, and the relaxation-time approximation. A detailed analysis is showcased on ten prototypical semiconductors, namely diamond, silicon, GaAs, 3C-SiC, AlP, GaP, c-BN, AlAs, AlSb, and SrO. By comparing this extensive dataset with available experimental data, we explore the intrinsic nature of phonon-limited carrier transport and magnetotransport phenomena in these compounds. We find that the most accurate calculations predict Hall mobilities up to a factor of two larger than experimental data; this could point to promising experimental improvements in the samples quality, or to the limitations of density-function theory in predicting the carrier effective masses and overscreening the electron-phonon matrix elements. By setting tight standards for reliability and reproducibility, the present work aims to facilitate validation and verification of data and software towards predictive calculations of transport phenomena in semiconductors.

  • 6 authors
·
May 9, 2021

From Quantized Hall Plateaus to Topological Surfaces: Quantum Capacitance as a Unifying Probe

The quantum Hall effect, topological insulators and quantum capacitance are usually treated as distinct topics, yet they share a common thread. Bulk topology determines a protected boundary state, and quantum capacitance is one of the few electrostatic methods able to detect the density of states. This paper examines that connection. The integer quantum Hall effect showed that quantised boundary transport has a topological origin given by the Chern number, later extended to zero field in Z2 topological insulators with helical edge and Dirac surface states. Quantum capacitance, developed for two-dimensional electron gases, has since become a key technique for mapping the Landau level density of states underlying the quantum Hall effect and the linear Dirac density of states of topological surface states. This picture is complicated by self-consistent screening theory, which shows that the quantum Hall bulk splits into compressible and incompressible regions that shift with field. Local quantum capacitance measurements confirm that the bulk is not uniformly insulating across a quantised plateau, even though the plateau stays quantised. The paper argues that quantum capacitance is not a secondary feature of these phenomena but one of the clearest windows into the boundary density of states that topology imposes, and that it reveals the local, field-dependent nature of the insulating bulk assumption underlying the analogy between the quantum Hall effect and topological insulators.

  • 1 authors
·
Sep 28

CHGNet: Pretrained universal neural network potential for charge-informed atomistic modeling

The simulation of large-scale systems with complex electron interactions remains one of the greatest challenges for the atomistic modeling of materials. Although classical force fields often fail to describe the coupling between electronic states and ionic rearrangements, the more accurate ab-initio molecular dynamics suffers from computational complexity that prevents long-time and large-scale simulations, which are essential to study many technologically relevant phenomena, such as reactions, ion migrations, phase transformations, and degradation. In this work, we present the Crystal Hamiltonian Graph neural Network (CHGNet) as a novel machine-learning interatomic potential (MLIP), using a graph-neural-network-based force field to model a universal potential energy surface. CHGNet is pretrained on the energies, forces, stresses, and magnetic moments from the Materials Project Trajectory Dataset, which consists of over 10 years of density functional theory static and relaxation trajectories of sim 1.5 million inorganic structures. The explicit inclusion of magnetic moments enables CHGNet to learn and accurately represent the orbital occupancy of electrons, enhancing its capability to describe both atomic and electronic degrees of freedom. We demonstrate several applications of CHGNet in solid-state materials, including charge-informed molecular dynamics in Li_xMnO_2, the finite temperature phase diagram for Li_xFePO_4 and Li diffusion in garnet conductors. We critically analyze the significance of including charge information for capturing appropriate chemistry, and we provide new insights into ionic systems with additional electronic degrees of freedom that can not be observed by previous MLIPs.

  • 7 authors
·
Feb 27, 2023

High-throughput calculations of magnetic topological materials

The discoveries of intrinsically magnetic topological materials, including semimetals with a large anomalous Hall effect and axion insulators, have directed fundamental research in solid-state materials. Topological quantum chemistry has enabled the understanding of and the search for paramagnetic topological materials. Using magnetic topological indices obtained from magnetic topological quantum chemistry (MTQC), here we perform a high-throughput search for magnetic topological materials based on first-principles calculations. We use as our starting point the Magnetic Materials Database on the Bilbao Crystallographic Server, which contains more than 549 magnetic compounds with magnetic structures deduced from neutron-scattering experiments, and identify 130 enforced semimetals (for which the band crossings are implied by symmetry eigenvalues), and topological insulators. For each compound, we perform complete electronic structure calculations, which include complete topological phase diagrams using different values of the Hubbard potential. Using a custom code to find the magnetic co-representations of all bands in all magnetic space groups, we generate data to be fed into the algorithm of MTQC to determine the topology of each magnetic material. Several of these materials display previously unknown topological phases, including symmetry-indicated magnetic semimetals, three-dimensional anomalous Hall insulators and higher-order magnetic semimetals. We analyse topological trends in the materials under varying interactions: 60 per cent of the 130 topological materials have topologies sensitive to interactions, and the others have stable topologies under varying interactions. We provide a materials database for future experimental studies and open-source code for diagnosing topologies of magnetic materials.

  • 9 authors
·
Feb 28, 2020

A molecular Ferroelectric thin film of imidazolium perchlorate on Silicon

Molecular ferroelectric materials have attracted widespread attention due to their abundant chemical diversity, structural tunability, low synthesis temperature, and high flexibility. Meanwhile, the integration of molecular ferroelectric materials and Si is still challenging, while the fundamental understanding of the ferroelectric switching process is still lacking. Herein, we have successfully synthesized the imidazole perchlorate (ImClO4) single crystals and a series of high-quality highly-oriented thin films on a Si substrate. A high inverse piezoelectric coefficient (55.7 pm/V) is demonstrated for the thin films. Two types of domain bands can be observed (in the size of a few microns): type-I band tilts ~60{\deg} with respect to the horizontal axis, while the type-II band is perpendicular to the horizontal axis. Most of the domain walls (DWs) are 180{\deg} DWs for the two bands, while some 109{\deg} DWs can also be observed. Interestingly, the DWs in type-I band are curved, charged domain walls; while the 180{\deg} DWs in type-II band are straight, noncharged domain walls. After applying +20 V for 5 s through a PFM tip, the 180{\deg} DWs in type-I band shrink first, then disconnect from the band boundary, forming a needle-like domain with a size of ~100 nm. The needle-like domain will extend toward the band boundary after an inverse bias is applied (-20 V), and expand along the band boundary after touching the boundary. Whereas for the type-II domain band, the 180{\deg} DWs are more mobile than the 109{\deg} domain walls, which displaces ~500 nm after applying +20 V. While such displacement is much shorter after the application of a negative bias for the same duration, starting from the positively poled sample. We hope to spur further interest in the on-chip design of the molecular ferroelectrics based electronic devices.

  • 5 authors
·
Sep 30, 2023

Atomistic prediction of magnetic behaviour across chemistry, structure and temperature

Controlling magnetic phases and properties through composition and external conditions is central to the development of magnetic materials. Atomistic foundation models offer a route to predicting such behaviour across diverse materials, but magnetic materials remain challenging because their atomic structure and local moments are strongly coupled, while temperature and disorder drive magnetic moments into non-collinear states with evolving orientations and magnitudes. Broadly pretrained atomistic models still sample only limited magnetic diversity, while finite-temperature descriptions of coupled lattice and magnetic fluctuations remain largely material-specific. Here we introduce MagPT, pretrained across 48 elements on 912,492 spin-lattice configurations spanning structural, orientational and longitudinal magnetic fluctuations over 0 sim 1,000 K and 0 sim 10 GPa. By treating species, atomic positions and vector moments together, MagPT distinguishes magnetic states that share the same atomic structure but differ in spin configuration and energy. It captures magnetic behaviour across composition, temperature and length scales, from Slater-Pauling-type composition-magnetism relations in transition-metal alloys and finite-temperature phase evolution in elemental ferromagnets and magnetic shape-memory Heusler alloys, to emergent long-wavelength non-collinear spin textures in chiral magnets and local chemistry-magnetism coupling in high-entropy alloys. MagPT moves atomistic studies of magnetic materials beyond material-specific approaches, establishing a general framework for exploring and designing magnetic matter across diverse chemistries and conditions.

  • 18 authors
·
Oct 16

Complex Magnetic Phases and Unconventional Skyrmion Thermodynamics in Magnetically Intercalated Cr_{1+x}Te_2Compounds

Chemical intercalation provides a powerful route for tuning the electronic and magnetic properties of transition metal dichalcogenides (TMDs), enabling the emergence of magnetic phases and phenomena that are otherwise inaccessible in their pristine forms. Here, we investigate the structural, electronic, and magnetic properties of magnetically intercalated Cr_{1+x}Te_2 through a combination of scanning tunneling microscopy, angle-resolved photoemission spectroscopy, magnetization, electrical transport, and Lorentz transmission electron microscopy measurements. We uncover a rich magnetic phase diagram comprising paramagnetic, in-plane spin-fluctuation, out-of-plane ferromagnetic, and field-induced Néel-type skyrmion phases. In particular, Lorentz transmission electron microscopy directly reveals the formation of Néel-type skyrmion textures slightly below the Curie temperature, with their configurations evolving strongly with temperature and magnetic field. The skyrmions exhibit pronounced thermal hysteresis and coexist with stripe domains, indicative of a complex magnetic energy landscape arising from the competition among disorder-induced local Dzyaloshinskii-Moriya interactions, perpendicular magnetic anisotropy, and dipolar interactions. Our results demonstrate that chemical intercalation can profoundly reshape the magnetic interactions and phase behavior of TMDs, establishing Cr_{1+x}Te_2 as a versatile platform for exploring tunable magnetism, skyrmion physics, and unconventional thermodynamic phenomena in low-dimensional quantum materials.

  • 16 authors
·
Sep 30

2D Theoretically Twistable Material Database

The study of twisted two-dimensional (2D) materials, where twisting layers create moiré superlattices, has opened new opportunities for investigating topological phases and strongly correlated physics. While systems such as twisted bilayer graphene (TBG) and twisted transition metal dichalcogenides (TMDs) have been extensively studied, the broader potential of a seemingly infinite set of other twistable 2D materials remains largely unexplored. In this paper, we define "theoretically twistable materials" as single- or multi-layer structures that allow for the construction of simple continuum models of their moiré structures. This excludes, for example, materials with a "spaghetti" of bands or those with numerous crossing points at the Fermi level, for which theoretical moiré modeling is unfeasible. We present a high-throughput algorithm that systematically searches for theoretically twistable semimetals and insulators based on the Topological 2D Materials Database. By analyzing key electronic properties, we identify thousands of new candidate materials that could host rich topological and strongly correlated phenomena when twisted. We propose representative twistable materials for realizing different types of moiré systems, including materials with different Bravais lattices, valleys, and strength of spin-orbital coupling. We provide examples of crystal growth for several of these materials and showcase twisted bilayer band structures along with simplified twisted continuum models. Our results significantly broaden the scope of moiré heterostructures and provide a valuable resource for future experimental and theoretical studies on novel moiré systems.

  • 25 authors
·
Nov 14, 2024

Ergotropy and Capacity Optimization in Heisenberg Spin Chain Quantum Batteries

This study examines the performance of finite spin quantum batteries (QBs) using Heisenberg spin models with Dzyaloshinsky-Moriya (DM) and Kaplan--Shekhtman--Entin-Wohlman--Aharony (KSEA) interactions. The QBs are modeled as interacting quantum spins in local inhomogeneous magnetic fields, inducing variable Zeeman splitting. We derive analytical expressions for the maximal extractable work, ergotropy and the capacity of QBs, as recently examined by Yang et al. [Phys. Rev. Lett. 131, 030402 (2023)]. These quantities are analytically linked through certain quantum correlations, as posited in the aforementioned study. Different Heisenberg spin chain models exhibit distinct behaviors under varying conditions, emphasizing the importance of model selection for optimizing QB performance. In antiferromagnetic (AFM) systems, maximum ergotropy occurs with a Zeeman splitting field applied to either spin, while ferromagnetic (FM) systems benefit from a uniform Zeeman field. Temperature significantly impacts QB performance, with ergotropy in the AFM case being generally more robust against temperature increases compared to the FM case. Incorporating DM and KSEA couplings can significantly enhance the capacity and ergotropy extraction of QBs. However, there exists a threshold beyond which additional increases in these interactions cause a sharp decline in capacity and ergotropy. This behavior is influenced by temperature and quantum coherence, which signal the occurrence of a sudden phase transition. The resource theory of quantum coherence proposed by Baumgratz et al. [Phys. Rev. Lett. 113, 140401 (2014)] plays a crucial role in enhancing ergotropy and capacity. However, ergotropy is limited by both the system's capacity and the amount of coherence. These findings support the theoretical framework of spin-based QBs and may benefit future research on quantum energy storage devices.

  • 8 authors
·
Jul 31, 2024

Catalogue of chiral phonon materials

Chiral phonons, circularly polarized lattice vibrations carrying intrinsic angular momentum, offer unprecedented opportunities for controlling heat flow, manipulating quantum states through spin-phonon coupling, and realizing exotic transport phenomena. Despite their fundamental importance, a universal framework for identifying and classifying these elusive excitations has remained out of reach. Here, we address this challenge by establishing a comprehensive symmetry-based theory that systematically classifies the helicity and the velocity-angular momentum tensor underlying phonon magnetization in thermal transport across all 230 crystallographic space groups. Our approach, grounded in fundamental representations of phononic angular momentum, reveals three distinct classes of crystals: achiral crystals with vanishing angular momentum, chiral crystals with s-wave helicity, and achiral crystals exhibiting higher-order helicity patterns beyond the s-wave. By performing high-throughput computations and symmetry analysis of the dynamical matrices for 11614 crystalline compounds, we identified 2738 materials exhibiting chiral phonon modes and shortlisted the 170 most promising candidates for future experimental investigation. These results are compiled into an open-access Chiral Phonon Materials Database website, enabling rapid screening for materials with desired chiral phonon properties. Our theoretical framework transcends phonons--it provides a universal paradigm for classifying chiral excitations in crystalline lattices, from magnons to electronic quasiparticles.

  • 12 authors
·
Jun 16, 2025

MatterGPT: A Generative Transformer for Multi-Property Inverse Design of Solid-State Materials

Inverse design of solid-state materials with desired properties represents a formidable challenge in materials science. Although recent generative models have demonstrated potential, their adoption has been hindered by limitations such as inefficiency, architectural constraints and restricted open-source availability. The representation of crystal structures using the SLICES (Simplified Line-Input Crystal-Encoding System) notation as a string of characters enables the use of state-of-the-art natural language processing models, such as Transformers, for crystal design. Drawing inspiration from the success of GPT models in generating coherent text, we trained a generative Transformer on the next-token prediction task to generate solid-state materials with targeted properties. We demonstrate MatterGPT's capability to generate de novo crystal structures with targeted single properties, including both lattice-insensitive (formation energy) and lattice-sensitive (band gap) properties. Furthermore, we extend MatterGPT to simultaneously target multiple properties, addressing the complex challenge of multi-objective inverse design of crystals. Our approach showcases high validity, uniqueness, and novelty in generated structures, as well as the ability to generate materials with properties beyond the training data distribution. This work represents a significant step forward in computational materials discovery, offering a powerful and open tool for designing materials with tailored properties for various applications in energy, electronics, and beyond.

  • 8 authors
·
Aug 14, 2024

Weyl, Dirac and high-fold chiral fermions in topological quantum materials

Quantum materials hosting Weyl fermions have opened a new era of research in condensed matter physics. First proposed in 1929 in particle physics, Weyl fermions have yet to be observed as elementary particles. In 2015, Weyl fermions were detected as collective electronic excitations in the strong spin-orbit coupled material tantalum arsenide, TaAs. This discovery was followed by a flurry of experimental and theoretical explorations of Weyl phenomena in materials. Weyl materials naturally lend themselves to the exploration of the topological index associated with Weyl fermions and their divergent Berry curvature field, as well as the topological bulk-boundary correspondence giving rise to protected conducting surface states. Here, we review the broader class of Weyl topological phenomena in materials, starting with the observation of emergent Weyl fermions in the bulk and of Fermi arc states on the surface of the TaAs family of crystals by photoemission spectroscopy. We then discuss some of the exotic optical and magnetic responses observed in these materials, as well as the progress in developing some of the related chiral materials. We discuss the conceptual development of high-fold chiral fermions, which generalize Weyl fermions, and we review the observation of high-fold chiral fermion phases by taking the rhodium silicide, RhSi, family of crystals as a prime example. Lastly, we discuss recent advances in Weyl-line phases in magnetic topological materials. With this Review, we aim to provide an introduction to the basic concepts underlying Weyl physics in condensed matter, and to representative materials and their electronic structures and topology as revealed by spectroscopic studies. We hope this work serves as a guide for future theoretical and experimental explorations of chiral fermions and related topological quantum systems with potentially enhanced functionalities.

  • 6 authors
·
Mar 2, 2021

Deep Learning to Automate Parameter Extraction and Model Fitting of Two-Dimensional Transistors

We present a deep learning approach to extract physical parameters (e.g., mobility, Schottky contact barrier height, defect profiles) of two-dimensional (2D) transistors from electrical measurements, enabling automated parameter extraction and technology computer-aided design (TCAD) fitting. To facilitate this task, we implement a simple data augmentation and pre-training approach by training a secondary neural network to approximate a physics-based device simulator. This method enables high-quality fits after training the neural network on electrical data generated from physics-based simulations of ~500 devices, a factor >40times fewer than other recent efforts. Consequently, fitting can be achieved by training on physically rigorous TCAD models, including complex geometry, self-consistent transport, and electrostatic effects, and is not limited to computationally inexpensive compact models. We apply our approach to reverse-engineer key parameters from experimental monolayer WS_2 transistors, achieving a median coefficient of determination (R^2) = 0.99 when fitting measured electrical data. We also demonstrate that this approach generalizes and scales well by reverse-engineering electrical data on high-electron-mobility transistors while fitting 35 parameters simultaneously. To facilitate future research on deep learning approaches for inverse transistor design, we have published our code and sample data sets online.

  • 11 authors
·
Sep 4

OAM-Induced Lattice Rotation Reveals a Fractional Optimum in Fault-Tolerant GKP Quantum Sensing

Photon loss and dephasing rapidly degrade the sensitivity of quantum sensors, yet systematic methods for designing error-correcting codes whose geometry is simultaneously adapted to the sensing task and the noise channel do not exist. Here we establish that orbital-angular-momentum (OAM) encoding and Gottesman-Kitaev-Preskill (GKP) lattice geometry are structurally coupled: an OAM mode of topological charge ell induces a phase-space rotation θ_ell=ellπ/ell_{max}, corresponding to a family of twisted GKP stabilizer lattices. Using an end-to-end differentiable Strawberry Fields--TensorFlow circuit, we jointly optimise ell, the lattice aspect ratio r, and the finite-energy envelope ε to maximise quantum Fisher information subject to P_{rm err}leq10^{-3}. The optimum occurs at the fractional charge ell=1.5 (θ=67.5^circ), implementable with a half-integer spiral phase plate, which reduces P_{rm err} by 23.9times relative to the square-lattice baseline while leaving F_Q unchanged to within 0.2%. This surpasses the best integer value (ell=2, 15.7times) and arises from an exact 180^circ periodicity of the P_{rm err}(θ) landscape, confirmed analytically and numerically. We derive a transcendental balance equation for the optimal angle θ^*(η,γ,r) and prove that it decreases with both γ and η. A Shannon-inspired metrological capacity C=F_Qcdot(-ln P_{rm err}), maximised at ell=1.5 with a 41% gain over the square lattice, quantifies the joint sensitivity--fault-tolerance resource. These results establish a geometric design principle for noise-adaptive quantum sensors and a fully open-source differentiable template extensible to other bosonic code families.

  • 2 authors
·
May 13

Disentangling lattice and electronic contributions to the metal-insulator transition from bulk vs. layer confined RNiO_3

In complex oxide materials, changes in electronic properties are often associated with changes in crystal structure, raising the question of the relative roles of the electronic and lattice effects in driving the metal-insulator transition. This paper presents a combined theoretical and experimental analysis of the dependence of the metal-insulator transition of NdNiO_3 on crystal structure, specifically comparing properties of bulk materials to one and two layer samples of NdNiO_3 grown between multiple electronically inert NdAlO_3 counterlayers in a superlattice. The comparison amplifies and validates a theoretical approach developed in previous papers and disentangles the electronic and lattice contributions, through an independent variation of each. In bulk NdNiO_3 the correlations are not strong enough to drive a metal-insulator transition by themselves: a lattice distortion is required. Ultra-thin films exhibit two additional electronic effects and one lattice-related effect. The electronic effects are quantum confinement, leading to dimensional reduction of the electronic Hamiltonian, and an increase in electronic bandwidth due to counterlayer induced bond angle changes. We find that the confinement effect is much more important. The lattice effect is an increase in stiffness due to the cost of propagation of the lattice disproportionation into the confining material.

  • 5 authors
·
Sep 30, 2018

Competition of Exchange and Correlation Energies in Two-Dimensional N-component Electron Gas Ferromagnetism

Motivated by recent observations of symmtry broken phases in lightly-doped multilayer graphene, we investigate magnetic phase transitions in a generalized electron gas model with four-component electron spin. This model simplifies the problem with a parabolic dispersion band, abstracting away the details of the graphene band structure to focus solely on the effects of the Coulomb interaction. We report four findings: 1) In the Hartree-Fock approximation, we observe that the paramagnetic state undergoes a sequence of density-driven, first-order phase transitions, progressively depopulating electrons from each spin component until achieving complete polarization within a very narrow density window where 1.2<r_s<2 (r_s being the electron gas parameter). 2) Further incorporating the correlation energy via the Bohm-Pines random-phase approximation shows that the cascade of transitions obtained within Hartree-Fock approximation is replaced by a single ferromagnetic phase transition at r_s = 6.12. 3) The disappearance of cascade is due to the correlation energy difference between the four-component paramagnetic state and symmetry-broken phases, which is nearly an order of magnitude more negative than the corresponding Hartree-Fock energy difference for 1.2 < r_s < 2. 4) The transition from the paramagnetic state to the fully polarized state at r_s=6.12 is governed by the balance between exchange and correlation energies, a competition that cannot be captured by mean-field approximations to models featuring effective (density-dependent) delta-function interactions, such as the Stoner model. We use the insights from our model to comment on the phase diagram of multilayer graphene electron gas.

  • 3 authors
·
Jul 1, 2024

Simulating 2+1D Lattice Quantum Electrodynamics at Finite Density with Neural Flow Wavefunctions

We present a neural flow wavefunction, Gauge-Fermion FlowNet, and use it to simulate 2+1D lattice compact quantum electrodynamics with finite density dynamical fermions. The gauge field is represented by a neural network which parameterizes a discretized flow-based transformation of the amplitude while the fermionic sign structure is represented by a neural net backflow. This approach directly represents the U(1) degree of freedom without any truncation, obeys Guass's law by construction, samples autoregressively avoiding any equilibration time, and variationally simulates Gauge-Fermion systems with sign problems accurately. In this model, we investigate confinement and string breaking phenomena in different fermion density and hopping regimes. We study the phase transition from the charge crystal phase to the vacuum phase at zero density, and observe the phase seperation and the net charge penetration blocking effect under magnetic interaction at finite density. In addition, we investigate a magnetic phase transition due to the competition effect between the kinetic energy of fermions and the magnetic energy of the gauge field. With our method, we further note potential differences on the order of the phase transitions between a continuous U(1) system and one with finite truncation. Our state-of-the-art neural network approach opens up new possibilities to study different gauge theories coupled to dynamical matter in higher dimensions.

  • 4 authors
·
Dec 14, 2022

Achieving the quantum field theory limit in far-from-equilibrium quantum link models

Realizations of gauge theories in setups of quantum synthetic matter open up the possibility of probing salient exotic phenomena in condensed matter and high-energy physics, along with potential applications in quantum information and science technologies. In light of the impressive ongoing efforts to achieve such realizations, a fundamental question regarding quantum link model regularizations of lattice gauge theories is how faithfully they capture the quantum field theory limit of gauge theories. Recent work [Zache, Van Damme, Halimeh, Hauke, and Banerjee, at https://journals.aps.org/prd/abstract/10.1103/PhysRevD.106.L091502 has shown through analytic derivations, exact diagonalization, and infinite matrix product state calculations that the low-energy physics of 1+1D U(1) quantum link models approaches the quantum field theory limit already at small link spin length S. Here, we show that the approach to this limit also lends itself to the far-from-equilibrium quench dynamics of lattice gauge theories, as demonstrated by our numerical simulations of the Loschmidt return rate and the chiral condensate in infinite matrix product states, which work directly in the thermodynamic limit. Similar to our findings in equilibrium that show a distinct behavior between half-integer and integer link spin lengths, we find that criticality emerging in the Loschmidt return rate is fundamentally different between half-integer and integer spin quantum link models in the regime of strong electric-field coupling. Our results further affirm that state-of-the-art finite-size ultracold-atom and NISQ-device implementations of quantum link lattice gauge theories have the real potential to simulate their quantum field theory limit even in the far-from-equilibrium regime.

  • 5 authors
·
Dec 8, 2021

Physics-informed graph neural Galerkin networks: A unified framework for solving PDE-governed forward and inverse problems

Despite the great promise of the physics-informed neural networks (PINNs) in solving forward and inverse problems, several technical challenges are present as roadblocks for more complex and realistic applications. First, most existing PINNs are based on point-wise formulation with fully-connected networks to learn continuous functions, which suffer from poor scalability and hard boundary enforcement. Second, the infinite search space over-complicates the non-convex optimization for network training. Third, although the convolutional neural network (CNN)-based discrete learning can significantly improve training efficiency, CNNs struggle to handle irregular geometries with unstructured meshes. To properly address these challenges, we present a novel discrete PINN framework based on graph convolutional network (GCN) and variational structure of PDE to solve forward and inverse partial differential equations (PDEs) in a unified manner. The use of a piecewise polynomial basis can reduce the dimension of search space and facilitate training and convergence. Without the need of tuning penalty parameters in classic PINNs, the proposed method can strictly impose boundary conditions and assimilate sparse data in both forward and inverse settings. The flexibility of GCNs is leveraged for irregular geometries with unstructured meshes. The effectiveness and merit of the proposed method are demonstrated over a variety of forward and inverse computational mechanics problems governed by both linear and nonlinear PDEs.

  • 3 authors
·
Jul 16, 2021

Rise and Fall of Anderson Localization by Lattice Vibrations: A Time-Dependent Machine Learning Approach

The intricate relationship between electrons and the crystal lattice is a linchpin in condensed matter, traditionally described by the Fr\"ohlich model encompassing the lowest-order lattice-electron coupling. Recently developed quantum acoustics, emphasizing the wave nature of lattice vibrations, has enabled the exploration of previously uncharted territories of electron-lattice interaction not accessible with conventional tools such as perturbation theory. In this context, our agenda here is two-fold. First, we showcase the application of machine learning methods to categorize various interaction regimes within the subtle interplay of electrons and the dynamical lattice landscape. Second, we shed light on a nebulous region of electron dynamics identified by the machine learning approach and then attribute it to transient localization, where strong lattice vibrations result in a momentary Anderson prison for electronic wavepackets, which are later released by the evolution of the lattice. Overall, our research illuminates the spectrum of dynamics within the Fr\"ohlich model, such as transient localization, which has been suggested as a pivotal factor contributing to the mysteries surrounding strange metals. Furthermore, this paves the way for utilizing time-dependent perspectives in machine learning techniques for designing materials with tailored electron-lattice properties.

  • 4 authors
·
May 27, 2024

Searching for Materials with High Refractive Index and Wide Band Gap: A First-Principles High-Throughput Study

Materials combining both a high refractive index and a wide band gap are of great interest for optoelectronic and sensor applications. However, these two properties are typically described by an inverse correlation with high refractive index appearing in small gap materials and vice-versa. Here, we conduct a first-principles high-throughput study on more than 4000 semiconductors (with a special focus on oxides). Our data confirm the general inverse trend between refractive index and band gap but interesting outliers are also identified. The data are then analyzed through a simple model involving two main descriptors: the average optical gap and the effective frequency. The former can be determined directly from the electronic structure of the compounds, but the latter cannot. This calls for further analysis in order to obtain a predictive model. Nonetheless, it turns out that the negative effect of a large band gap on the refractive index can counterbalanced in two ways: (i) by limiting the difference between the direct band gap and the average optical gap which can be realized by a narrow distribution in energy of the optical transitions and (ii) by increasing the effective frequency which can be achieved through either a high number of transitions from the top of the valence band to the bottom of the conduction or a high average probability for these transitions. Focusing on oxides, we use our data to investigate how the chemistry influences this inverse relationship and rationalize why certain classes of materials would perform better. Our findings can be used to search for new compounds in many optical applications both in the linear and non-linear regime (waveguides, optical modulators, laser, frequency converter, etc.).

  • 6 authors
·
Sep 4, 2018

Ferromagnetic ordering in mazelike stripe liquid of a dipolar six-state clock model

We present a comprehensive numerical study of a six-state clock model with a long-range dipolar type interaction. This model is motivated by the ferroelectric orders in the multiferroic hexagonal manganites. At low temperatures, trimerization of local atomic structures leads to six distinct but energetically degenerate structural distortion, which can be modeled by a six-state clock model. Moreover, the atomic displacements in the trimerized state further produce a local electric polarization whose sign depends on whether the clock variable is even or odd. These induced electric dipoles, which can be modeled by emergent Ising degrees of freedom, interact with each other via long-range dipolar interactions. Extensive Monte Carlo simulations are carried out to investigate low temperature phases resulting from the competing interactions. Upon lowering temperature, the system undergoes two Berezinskii-Kosterlitz-Thouless (BKT) transitions, characteristic of the standard six-state clock model in two dimensions. The dipolar interaction between emergent Ising spins induces a first-order transition into a ground state characterized by a three-fold degenerate stripe order. The intermediate phase between the discontinuous and the second BKT transition corresponds to a maze-like hexagonal liquid with short-range stripe ordering. Moreover, this intermediate phase also exhibits an unusual ferromagnetic order with two adjacent clock variables occupying the two types of stripes of the labyrinthine pattern.

  • 3 authors
·
Dec 12, 2024

Magnetic Susceptibility of Superconducting Films in the Meissner-London Regime

Extracting the London penetration depth, λ(T), from the measured magnetic susceptibility, χ(T), of a superconducting platelet in a perpendicular magnetic field requires knowing the function χ(λ) computed for the actual sample geometry. Thin films are increasingly important in quantum computing and superconducting electronics, most of which operate at ultra-low excitation fields in the vortex-free regime. Understanding their electromagnetic response in the Meissner--London (finite-λ, no vortices) state is therefore essential for extracting intrinsic properties such as the London penetration depth and superfluid phase stiffness. While numerous prior works have addressed different aspects of this problem, here we focus on providing an analytical semi-empirical representation of χ(λ) based on the 2D sheet-current model and establishing the limits of its applicability using two independent full 3D numerical solutions: finite-element modeling and a volume-current integral equation. As a result, we provide χ(λ) for a disc of radius a and thickness d in closed form, valid for all λ and for aspect ratios δequiv d/(2a)le0.05, and accurate to 0.1%. The two-dimensional sheet description with Pearl length Λ=2λ^2/d is adequate for δlesssim10^{-4} and λgtrsim 4d. Thicker films require the full closed form, which includes the three-dimensional corrections. Using the same numerical analysis, we provide an empirical formula that maps rectangular samples---the geometry most commonly used in experiments---onto a disc with an ``effective radius'' for subsequent calculation of χ(λ), and formulate a complete calibration protocol for whole-sample susceptibility measurements.

  • 1 authors
·
Oct 13

A Physics-Informed, Global-in-Time Neural Particle Method for the Spatially Homogeneous Landau Equation

We propose a physics-informed neural particle method (PINN--PM) for the spatially homogeneous Landau equation. The method adopts a Lagrangian interacting-particle formulation and jointly parameterizes the time-dependent score and the characteristic flow map with neural networks. Instead of advancing particles through explicit time stepping, the Landau dynamics is enforced via a continuous-time residual defined along particle trajectories. This design removes time-discretization error and yields a mesh-free solver that can be queried at arbitrary times without sequential integration. We establish a rigorous stability analysis in an L^2_v framework. The deviation between learned and exact characteristics is controlled by three interpretable sources: (i) score approximation error, (ii) empirical particle approximation error, and (iii) the physics residual of the neural flow. This trajectory estimate propagates to density reconstruction, where we derive an L^2_v error bound for kernel density estimators combining classical bias--variance terms with a trajectory-induced contribution. Using Hyvarinen's identity, we further relate the oracle score-matching gap to the L^2_v score error and show that the empirical loss concentrates at the Monte Carlo rate, yielding computable a posteriori accuracy certificates. Numerical experiments on analytical benchmarks, including the two- and three-dimensional BKW solutions, as well as reference-free configurations, demonstrate stable transport, preservation of macroscopic invariants, and competitive or improved accuracy compared with time-stepping score-based particle and blob methods while using significantly fewer particles.

  • 4 authors
·
Mar 11 1