NexLab_System / deployment_guide.md
alisaleem97's picture
Upload folder using huggingface_hub
6ea020b verified
|
Raw History Blame Contribute Delete
1.82 kB

NexLab LIS Deployment Guide (Server PC)

This guide helps you move the NexLab Laboratory System to a new PC and set it up as a server for other machines in the lab.

Step 1: Copying the System

  1. Locate the NexLab_Published folder created by the packager.
  2. Copy this entire folder to your target PC (e.g., using a USB Drive).
  3. Place it in a safe location (e.g., C:\NexLab_LIS).

Step 2: One-Time Set Up (Target PC)

  1. Open the NexLab_Published folder on the new PC.
  2. Double-click install_requirements.bat. This will:
    • Create the virtual environment.
    • Install all Python libraries.
    • Download the PDF generation components (Playwright Chrome).
    • Note: This requires internet access the first time.

Step 3: Running the System

  1. Double-click start_nexlab.bat.
  2. A window will open showing that the server is running.
  3. You can access the system on this PC at: http://localhost:8000 (or your chosen port).

Extra: How to Change the Port

If you need to change the port (e.g. to 5000 or 80):

  1. Open start_nexlab.bat in Notepad.
  2. Change the line set "PORT=8000" to your preferred number.
  3. Save the file and restart the system.

Step 4: Connecting from Other PCs

  1. find the IP Address of the Server PC:
    • Open Command Prompt and type ipconfig.
    • Look for "IPv4 Address" (e.g., 192.168.1.50).
  2. On any other PC in the lab, open a browser and go to: http://192.168.1.50:8000.

Step 5: (Optional) Automatic Start

  1. To make the server start automatically when you log into Windows:
  2. Double-click add_to_startup.bat once.

Requirements for the Server PC:

  • Windows 10/11.
  • Python 3.10 or higher installed (one-time requirement for the environment setup).
  • Port 8000 allowed in Windows Firewall (if connecting from other PCs).