hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.2.4.2 Test purpose | To verify that the MS waits T3146 seconds before aborting the packet access procedure. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.2.4.3 Method of test | Initial conditions
System Simulator: Default settings except:
System Information parameter MAX_RETRANS is set to 2 retransmissions.
CCCH non-combined with SDCCH.
System Information parameter TX_INTEGER in RACH Control Parameters is set to 3.
Mobile Station:
MS is switched off.
Specific PICS Statements
-
PIXIT Statement... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.2.5 Initiation of the packet access procedure / Request Reference | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.2.5.1 Conformance requirements | On receipt of an IMMEDIATE ASSIGNMENT message corresponding to one of its 3 last CHANNEL REQUEST messages, the mobile stops sending CHANNEL REQUEST messages and switches to the assigned PDCH.
Reference
3GPP TS 04.08 / 3GPP TS 44.018 subclause 3.5.2.1.3.1. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.2.5.2 Test purpose | 1. To verify that the MS continues sending CHANNEL REQUEST messages when receiving an IMMEDIATE ASSIGNMENT containing an incorrect Request Reference.
2. To verify that the MS stops sending CHANNEL REQUEST messages and switches to the assigned PDCH when receiving an IMMEDIATE ASSIGNMENT containing a Request Reference IE... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.2.5.3 Method of test | Initial conditions
System Simulator:
1 cell, CCCH combined with SDCCH, Parameter MAX_RETRANS is set to 7 retransmissions.
Mobile Station:
The MS is switched off.
Specific PICS Statements
-
PIXIT Statements
-
Test procedure
The MS is triggered to initiate the GPRS attach procedure. After 3 CHANNEL REQUEST messages, the ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3 Packet immediate assignment / One phase packet access | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.1 Two-message assignment / Successful case | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.1.1 Conformance requirements | If the mobile station receives an IMMEDIATE ASSIGNMENT message and the Dedicated mode or TBF information element indicates that this is the first message in a two-message assignment, the mobile station shall continue to listen to the full CCCH. The network may send a second IMMEDIATE ASSIGNMENT message within two multi... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.1.2 Test purpose | To verify that the MS correctly decodes a two-message assignment and switches to the assigned PDCH. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.1.3 Method of test | Initial conditions
System Simulator:
1 cell, CCCH combined with SDCCH.
Mobile Station:
MS is switched off.
Specific PICS Statements
-
PIXIT Statements
-
Test procedure
The MS is triggered to initiate the GPRS attach procedure. After reception of CHANNEL REQUEST the SS sends a two-message IMMEDIATE ASSIGNMENT which actu... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.2 Two-message assignment / Failure cases | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.2.1 Conformance requirements | If the indirect encoding is used, the IMMEDIATE ASSIGNMENT message may contain a CHANGE_MARK_1 field. If that is present, the mobile station shall verify the validity of the SI13_CHANGE_MARK associated with the GPRS mobile allocation to which the message refers, see 3GPP TS 04.60. If the CHANGE_MARK_1 field and the SI1... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.2.2 Test purpose | To verify that the MS does not respond to a two-message assignment if:
- CHANGE_MARK_1 does not match SI13 CHANGE_MARK.
- The second IMMEDIATE ASSIGNMENT message is not received within two multiframes after the first -message.
- Request References in both messages do not have same contents. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.2.3 Method of test | Initial conditions
System Simulator:
1 cell, CCCH combined with SDCCH, CHANGE_MARK in SI13 is set to 1, TX-INTEGER = 7.
Mobile Station:
MS is switched off.
Specific PICS Statements
-
PIXIT Statements
-
Test procedure
The MS is triggered to initiate the GPRS attach procedure. After reception of CHANNEL REQUEST the SS se... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.3 Packet uplink assignment / Polling bit set | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.3.1 Conformance requirement | If the Polling bit is set to 1, MS shall send a PACKET CONTROL ACKNOWLEDGEMENT message (see 04.60) on the assigned PDCH, in the uplink block specified by the TBF Starting Time. In this case the TBF Starting Time is used both to indicate when the assigned PDCH becomes valid and to specify the uplink block.
Reference
3GP... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.3.2 Test purpose | To verify that the MS sends a PACKET CONTROL ACKNOWLEDGEMENT message in the correct uplink block if the Polling bit is set in packet uplink assignment construction. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.3.3 Method of test | Initial conditions
System Simulator:
1 cell, CCCH combined with SDCCH.
Mobile Station:
MS is switched off.
Specific PICS Statements
- MS operation mode B Yes/No (TSPC_operation_mode_B)
- Automatic GPRS attach procedure at switch on or power on Yes/No (TSPC_AddInfo_on_auto_GPRS_AP)
PIXIT Statements
-
Test procedure
The ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.4 One phase packet access / Contention resolution / Successful case | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.4.1 Conformance requirements | After receiving an IMMEDIATE ASSIGNMENT message in which one phase packet access for an uplink transfer is granted, the mobile station shall start timer T3164 and proceed with the contention resolution at one phase access defined in 3GPP TS 04.60.
Reference
3GPP TS 04.08 / 3GPP TS 44.018 subclause 3.5.2.1.3.2.
3GPP TS ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.4.2 Test purpose | To verify that the MS includes the correct TLLI (Temporary Logical Link Identifier) in the first RLC data blocks until contention resolution is completed. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.4.3 Method of test | Initial conditions
System Simulator:
1cell, CCCH combined with SDCCH.
Mobile Station:
MS is GPRS attached, the PDP context 2 has been established and the MS is in Packet Idle mode.
Specific PICS Statements
-
PIXIT Statements
-
Test procedure
The MS is triggered to transfer data. The SS assigns packet uplink resources i... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.5 One phase packet access / Contention resolution / TLLI mismatch | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.5.1 Conformance requirement | If the TLLI in the PACKET UPLINK ACK/NACK message differs from that sent by the MS in the RLC block headers, the MS shall immediately stop transmitting on this TBF and re-initiate the packet access procedure unless it has already been repeated 4 times.
Reference
3GPP TS 04.08 / 3GPP TS 44.018 subclause 3.5.2.1.3.2.
3GP... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.5.2 Test purpose | To verify that the MS immediately stops transmitting if it receives a PACKET UPLINK ACK/NACK with incorrect TLLI. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.5.3 Method of test | Initial conditions
System Simulator:
1cell, CCCH combined with SDCCH.
Mobile Station:
MS is GPRS attached, the PDP context 2 has been established and the MS is in Packet Idle mode.
Specific PICS Statements
-
PIXIT Statements
-
Test procedure
The MS is triggered to transfer data. The SS assigns packet uplink resources i... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.6 One phase packet access / Contention resolution / Counter N3104 | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.6.1 Conformance requirement | The contention resolution has failed on the mobile station when the counter N3104 has reached its maximum value.
Reference
3GPP TS 04.60 subclause 7.1.2.3 |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.6.2 Test purpose | To verify that the MS correctly sets and considers counter N3104.
NOTE: Counter N3104 is incremented by 1 with each new RLC/MAC block the mobile station sends until the first PACKET UPLINK ACK/NACK message is received.
Its maximum value is N3104_MAX = 3 * (BS_CV_MAX + 3) * number of uplink timeslots assigned, where BS_... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.6.3 Method of test | Initial conditions
System Simulator: Default settings except:
1 cell, CCCH combined with SDCCH, BS_CV_MAX value in System Information Type 13 arbitrarily chosen in the range 3 to 6.
Mobile Station:
MS is GPRS attached, the PDP context 2 has been established and the MS is in Packet Idle mode.
Specific PICS Statements
-
... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.7 One phase packet access / Contention resolution / Timer T3166 | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.7.1 Conformance requirement | The contention resolution has failed on the mobile station when the counter N3104 has reached its maximum value, or on expiry of timer T3166.
Reference
3GPP TS 04.60 subclause 7.1.2.3. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.7.2 Test purpose | To verify that the MS correctly considers timer T3166. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.7.3 Method of test | Initial conditions
System Simulator:
1 cell, CCCH combined with SDCCH, BS_CV_MAX value in System Information Type 13 is set to 6.
Mobile Station:
MS is GPRS attached, the PDP context 2 has been established and the MS is in Packet Idle mode.
Specific PICS Statements
-
PIXIT Statements
-
Test procedure
The MS is triggere... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.8 One phase packet access / Contention resolution / 4 access repetition attempts | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.8.1 Conformance requirement | If contention resolution for packet access fails, the mobile station shall reinitiate the packet access procedure unless it has already been repeated 4 times.
Reference
3GPP TS 04.60 subclause 7.1.2.3. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.8.2 Test purpose | To verify that the MS attempts the packet access procedure 4 or 5 times. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.8.3 Method of test | Initial conditions
System Simulator:
1cell, CCCH combined with SDCCH.
Mobile Station:
MS is GPRS attached, the PDP context 2 has been established and the MS is in Packet Idle mode.
Specific PICS Statements
- GPRS Release (TSPC_MS_GPRS_RELEASE)
PIXIT Statements
-
Test procedure
The MS is triggered to transfer 200 octets... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.9 One phase packet access / TBF starting time | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.9.1 Conformance requirement | In case the packet uplink assignment construction contains a TBF starting time and the mobile station receives the IMMEDIATE ASSIGNMENT message before the TBF starting time has expired, it shall wait until the frame number indicated by the TBF starting time before accessing the channel. If the mobile station receives t... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.9.2 Test purpose | To verify that the MS correctly considers the TBF Starting Time included in the IMMEDIATE ASSIGNMENT message. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.9.3 Method of test | Initial conditions
System Simulator:
1cell, CCCH combined with SDCCH.
Mobile Station:
MS is GPRS attached, the PDP context 2 has been established and the MS is in Packet Idle mode.
Specific PICS Statements
-
PIXIT Statements
-
Test procedure
The MS is triggered to transfer data. The SS assigns packet uplink resources i... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.10 One phase packet access / Timing Advance Index present | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.10.1 Conformance requirement | If the timing advance index (TAI) is included in the packet uplink assignment construction, the mobile station shall use the continuous update timing advance mechanism, see 3GPP TS 05.10, using PTCCH in the same timeslot as the assigned PDCH.
Reference
3GPP TS 04.08 / 3GPP TS 44.018 subclause 3.5.2.1.3.2.
3GPP TS 03.64... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.10.2 Test purpose | To verify that the MS uses the continuous update timing advance mechanism and sends access bursts in the PTCCH slots as determined by the Timing Advance Index (TAI) sent in the IMMEDIATE ASSIGNMENT. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.10.3 Method of test | Initial conditions
System Simulator:
1 cell, CCCH combined with SDCCH.
Mobile Station:
MS is GPRS attached, the PDP context 2 has been established and the MS is in Packet Idle mode.
Specific PICS Statements
-
PIXIT Statements
-
Test procedure
The MS is triggered for uplink data transfer. The SS assigns packet uplink re... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.11 One phase packet access / Timing Advance Index not present | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.11.1 Conformance requirement | If a timing advance index (TAI) field is not included, the continuous update timing advance mechanism shall not be used.
Reference
3GPP TS 04.08 / 3GPP TS 44.018 subclause 3.5.2.1.3.2. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.11.2 Test purpose | To verify that the MS does not send any access bursts on PTCCH (i.e. it does not use the continuous update timing advance mechanism) if TAI is not present in the IMMEDIATE ASSIGNMENT message. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.3.11.3 Method of test | Initial conditions
System Simulator:
1 cell, CCCH combined with SDCCH.
Mobile Station:
MS is GPRS attached, the PDP context 2has been established and the MS is in Packet Idle mode.
Specific PICS Statements
-
PIXIT Statements
-
Test procedure
The MS is triggered to transfer data. The SS assigns packet uplink resources i... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.4 Packet immediate assignment / Single block packet access | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.4.1 Single block packet access / Packet Resource Request | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.4.1.1 Conformance requirement | The network shall use the TBF starting time to indicate the first frame number belonging to the single block period granted for packet access. The mobile station may use that block period to send a PACKET RESOURCE REQUEST message to initiate the two phase access defined in 3GPP TS 04.60, or to send a PACKET MEASUREMENT... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.4.1.2 Test purpose | To verify that the MS sends PACKET RESOURCE REQUEST in the assigned block as indicated by the TBF starting time when it is triggered for uplink transfer. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.4.1.3 Method of test | Initial conditions
System Simulator:
1 cell, CCCH combined with SDCCH.
Mobile Station:
MS is GPRS attached, a PDP context has been established and the MS is in Packet Idle mode.
Specific PICS Statements
-
PIXIT Statements
-
Test procedure
The MS is triggered to initiate uplink data transfer. The SS assigns packet uplin... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.4.2 Single block packet access / Packet Measurement Report | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.4.2.1 Conformance requirement | 1. The network shall use the TBF starting time to indicate the first frame number belonging to the single block period granted for packet access. The mobile station may use that block period to send a PACKET RESOURCE REQUEST message to initiate the two phase access defined in 3GPP TS 04.60, or to send a PACKET MEASUREM... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.4.2.2 Test purpose | To verify that the MS sends PACKET MEASUREMENT REPORT in the assigned uplink block when performing a measurement report procedure.
Further on, this tests verifies that the MS correctly considers reporting parameter NC_REPORTING_PERIOD_I. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.4.2.3 Method of test | Initial conditions
System Simulator:
1 cell, CCCH combined with SDCCH.
Mobile Station:
MS is GPRS attached, in Ready state and in Packet Idle mode.
Specific PICS Statements
-
PIXIT Statements
-
Foreseen final state of the MS
-
Test procedure
The SS requests the MS via a PACKET MEASUREMENT ORDER to periodically send mea... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.5 Packet immediate assignment / Packet access rejection | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.5.1 Packet access rejection / wait indication | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.5.1.1 Conformance requirement | On receipt of an IMMEDIATE ASSIGNMENT REJECT message corresponding to one of its 3 last CHANNEL REQUEST messages, the mobile station stops sending CHANNEL REQUEST messages, starts timer T3142 with the indicated value, ("wait indication" information element), starts T3146 if it has not already been started, and listens ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.5.1.2 Test purpose | To verify that the MS stops sending CHANNEL REQUEST messages when receiving an IMMEDIATE ASSIGNMENT REJECT containing a Request Reference IE corresponding to one of its last 3 CHANNEL REQUEST messages.
Further on, the SS verifies that the MS makes a new attempt for uplink transfer only after T3142 seconds ("wait indica... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.5.1.3 Method of test | Initial conditions
System Simulator:
1 cell, CCCH combined with SDCCH, Parameter MAX_RETRANS is set to 7 retransmissions.
Mobile Station: MS is switched off.
Specific PICS Statements
-
PIXIT Statements
-
Foreseen final state of the MS
-
Test procedure
The MS is triggered to initiate the GPRS attach procedure. After rec... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.5.2 Packet access rejection / assignment before T3142 expires | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.5.2.1 Conformance requirement | On receipt of an IMMEDIATE ASSIGNMENT REJECT message corresponding to one of its 3 last CHANNEL REQUEST messages, the mobile station stops sending CHANNEL REQUEST messages, starts timer T3142 with the indicated value, ("wait indication" information element), starts T3146 if it has not already been started, and listens ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.5.2.2 Test purpose | To verify that the MS stops sending CHANNEL REQUEST messages when receiving an IMMEDIATE ASSIGNMENT REJECT and, if an IMMEDIATE ASSIGNMENT containing a correct Request Reference arrives before T = min {T3142, T3146} seconds elapse, then the MS shall accept this assignment (see below for a note on T3146). |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.5.2.3 Method of test | Initial conditions
System Simulator: Default settings except:
Parameter MAX_RETRANS is set to 7 retransmissions.
Parameter TX_INTEGER is set to 32.
CCCH combined with SDCCH.
Mobile Station:
MS is switched off.
Specific PICS Statements
-
PIXIT Statements
-
Foreseen final state of the MS
-
Test procedure
The MS is trigge... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.6 Packet downlink assignment procedure using CCCH | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.6.1 Initiation of packet downlink assignment procedure / MS listens to correct CCCH block | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.6.1.1 Conformance requirement | The network initiates the packet downlink assignment procedure by sending an IMMEDIATE ASSIGNMENT message in unacknowledged mode on the CCCH timeslot corresponding to CCCH group the mobile station belongs to.
On receipt of an IMMEDIATE ASSIGNMENT message [the MS] stops monitoring downlink CCCH and switches to the assig... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.6.1.2 Test purpose | To verify that the MS responds to an IMMEDIATE ASSIGNMENT for downlink TBF sent on PCH blocks corresponding to the MS's paging group. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.6.1.3 Method of test | Initial conditions
System Simulator: Default settings except:
Parameters CCCH_CONF, BS_AG_BLKS_RES, and BS_PA_MFRMS are arbitrarily chosen.
Mobile Station:
MS is GPRS attached, DRX have been negotiated, MS is in Ready state.
PDP context 2 has been established and the MS is in Packet Idle mode.
Specific PICS Statements
... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.6.2 Initiation of packet downlink assignment procedure / timer T3190 | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.6.2.1 Conformance requirement | On receipt of an IMMEDIATE ASSIGNMENT message [the MS] stops monitoring downlink CCCH and switches to the assigned PDCH and starts listening for downlink RLC/MAC blocks identified by the assigned TFI; it then starts timer T3190.
If the mobile station does not receive a RLC/MAC block on the assigned PDCHs before timer T... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.6.2.2 Test purpose | To verify that the MS returns to packet idle updated if RLC/MAC blocks are sent after T3190 s, and that the MS correctly receives RLC/MAC blocks if they are sent before T3190 s. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.6.2.3 Method of test | Initial conditions
System Simulator:
1 cell, CCCH combined with SDCCH.
Mobile Station:
MS is GPRS attached, a PDP context has been established and the MS is in Packet Idle mode.
Specific PICS Statements
-
PIXIT Statements
-
Test procedure
The SS assigns a PDCH for downlink transfer but does not send any RLC/MAC blocks ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.6.3 Initiation of packet downlink assignment procedure / TBF starting time | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.6.3.1 Conformance requirement | The IMMEDIATE ASSIGNMENT message may indicate a TBF starting time. If the mobile station receives the message before the TBF starting time has expired, it shall wait until the frame number indicated by the TBF starting time, start timer T3190 and switch to the assigned PDCH. If the mobile station receives the message a... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.6.3.2 Test purpose | To verify that the MS correctly considers the TBF starting time during downlink assignment. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.6.3.3 Method of test | Initial conditions
System Simulator:
1 cell, CCCH combined with SDCCH.
Mobile Station:
MS is GPRS attached, a PDP context has been established and the MS is in Packet Idle mode.
Specific PICS Statements
-
PIXIT Statements
-
Test procedure
The SS assigns a PDCH via an IMMEDIATE ASSIGNMENT including a TBF starting time. ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.6.4 Initiation of packet downlink assignment procedure / incorrect TFI | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.6.4.1 Conformance requirement | On receipt of an IMMEDIATE ASSIGNMENT message [the MS] stops monitoring downlink CCCH and switches to the assigned PDCH and starts listening for downlink RLC/MAC blocks identified by the assigned Temporary Flow Identifier (TFI).
Reference
3GPP TS 04.08 / 3GPP TS 44.018 subclause 3.5.3.1.2. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.6.4.2 Test purpose | To verify that the MS correctly considers the TFI in the RLC/MAC blocks. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.6.4.3 Method of test | Initial conditions
System Simulator:
1 cell, CCCH combined with SDCCH.
Mobile Station:
MS is GPRS attached, a PDP context has been established and the MS is in Packet Idle mode.
Specific PICS Statements
-
PIXIT Statements
-
Test procedure
The SS assigns a PDCH and starts transmitting RLC/MAC blocks with incorrect TFI. ... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.7 Single block packet downlink assignment | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.7.1 Single block packet downlink assignment / TBF Starting Time | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.7.1.1 Conformance requirement | The sending of an RLC/MAC control message to a mobile station in packet idle mode may be initiated by the RR entity on network side using the packet downlink assignment procedure. The procedure is used to assign a single downlink block on a PDCH for the transfer of the RLC/MAC control message.
The packet downlink const... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.7.1.2 Test purpose | To verify that the MS correctly decodes the RLC control block sent by the network on the assigned downlink block given by TBF starting time in the IMMEDIATE ASSIGNMENT message. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.7.1.3 Method of test | Initial conditions
System Simulator:
1 cell, CCCH combined with SDCCH. The parameter CONTROL_ACK_TYPE in SI13 indicates four access bursts.
Mobile Station:
MS is GPRS attached, in Ready state and in Packet Idle mode.
Specific PICS Statements
-
PIXIT Statements
-
Test procedure
The SS assigns a single block for downlink... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.7.2 Single block packet downlink assignment / MS returns to packet idle mode | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.7.2.1 Conformance requirement | 1. Unless otherwise indicated by the RLC/MAC control message, the mobile station remains in packet idle mode. If the mobile station remains in packet idle mode, it shall continue to monitor downlink CCCH once the block period indicated by the TBF starting time has passed.
2. In packet idle mode, the reporting period is... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.7.2.2 Test purpose | To verify that the MS remains in packet idle mode and monitors downlink CCCH once the block period indicated by the TBF starting time has passed. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.7.2.3 Method of test | Initial conditions
System Simulator: Default settings except:
NETWORK_CONTROL_ORDER in SI 13 Rest Octets set to '00' (no measurement reporting).
CCCH combined with SDCCH.
Mobile Station:
MS is GPRS attached in Packet Idle mode.
Specific PICS Statements
-
PIXIT Statements
-
Test procedure
The SS assigns a single block f... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.8 Macros and default message contents | |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.8.1 Macros | In order to simplify the process of writing and coding test cases, macros are referenced in the expected signalling tables. These macros provide all additional signalling needed to complete the particular test but are not relevant to its purpose. |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.8.1.1 GPRS attach procedure | The following table describes a signalling sequence performing the GPRS attach procedure. Note that there are different possible sequences implementing the GPRS attach procedure.
The macros {Completion of GPRS attach} in the test cases refer to the table below starting at the step required for the particular sequence.
... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.8.1.2 Uplink data transfer | The following table describes a sequence performing uplink data transfer in acknowledged mode.
{Uplink data transfer, acknowledged mode}
Step
Direction
Message
Comments
0
A PDP context (in acknowledged RLC mode) has been established. The MS is triggered to send data.
1
MS -> SS
CHANNEL REQUEST
2
SS -> MS
IMMEDIATE ASSI... |
683b5b8a98f7b1390ddd5516ea9247a2 | 51.010-1 | 41.2.8.1.3 Downlink data transfer | The following table describes a sequence performing downlink data transfer in acknowledged mode.
{Downlink data transfer, acknowledged mode}
Step
Direction
Message
Comments
0
A PDP context (in acknowledged RLC mode) has been established.
1
SS -> MS
IMMEDIATE ASSIGNMENT
for downlink TBF, sent on CCCH on the correct CCCH... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.